Revised Edition V3 / October 2015 Side features Rear features Model: ASUS_Z00VD Audio jack Rear camera Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com. Front features Front camera Receiver Sensor Touch screen display Touch keys Volume key Power key Groove Micro USB port Microphone NOTE: Pry open the rear cover from the groove. User Guide E11068 Installing a micro SIM card 4. Insert the micro SIM card into one of the micro SIM card slots. 2. Pry the cover loose and then pull the rear cover off. Safety information ASUS Phone care To install a micro SIM card:
1. Locate the groove on the lower-right corner of your ASUS Phone. 2. Pry the cover loose and then pull the rear cover off. 3. Remove the battery. Micro SIM card 2 Micro SIM card 1 IMPORTANT: Use only a micro SIM card on your ASUS Phone. A trimmed SIM card may not properly fit into and may not be detected by your ASUS Phone. NOTE: Both micro SIM card slots support 3G/2G WCDMA network bands. But only one micro SIM card can connect to 3G WCDMA service at a time. 3. Remove the battery. Installing a microSD card To install a microSD card:
1. Locate the groove on the lower-right corner of your ASUS Phone. 4. Insert the microSDcard into the microSD card slot. CAUTION: Do not use sharp tools or solvent on your device to avoid scratches on it. Charging your ASUS Phone To charge your ASUS Phone:
1. Connect the USB connector into the power adapters USB port. 2. Connect the other end of the micro USB cable to your ASUS Phone. Camera flash 3. Plug the power adapter into a wall socket. 3 2 1 Rear cover Speaker IMPORTANT!
When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. When charging your ASUS Phone through your computer, ensure that you plug the micro USB cable to your computers USB 2.0 / USB 3.0 port. Avoid charging your ASUS Phone in an environment with ambient temperature of above 35oC (95oF). NOTES:
Remove the rear cover to display the dual micro SIM and microSD card slots. The micro SIM card slots support WCDMA and GSM/EDGE network bands. The microSD card slot supports microSD and microSDHC card formats. NOTES:
Use only the power adapter that came with your device. Using a different power adapter may damage your device. Using the bundled power adapter and ASUS Phone signal cable to connect your ASUS Phone to a power outlet is the best way to charge your ASUS Phone. Use the ASUS 5W power adapter and ASUS USB cable to get the best fast-charge experience when your ASUS Phone is in sleep mode. The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is +5.2V 1A, 5W. Use your ASUS Phone in an environment with ambient temperatures between -10 C (14 F) and 35 C (95 F). NOTES:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The battery Your ASUS Phone is equipped with a high performance non-detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life. Do not remove the non-detachable Li-on battery as this will void the warranty. Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 C to +35 C. Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device. Do not remove and soak the battery in water or any other liquid. Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin. Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects. Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. Do not touch the battery terminals. The charger Use only the charger supplied with your ASUS Phone. Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between -10 C (14 F) and 35 C (95 F). Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. Do not short-circuit the battery terminals with metal items. Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. FCC Regulations RF Exposure Information (SAR) This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
MSQZ00VD. For this device, the highest reported SAR value for usage against the head is 0.80 W/kg, for usage near the body is 1.15 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided. CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 1.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. Regional notice for Singapore This ASUS Phone complies with IDA Standards. Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product. EC Declaration of Conformity We, the undersigned, Manufacturer:
Address:
Authorized representative in Europe:
Address, City:
Country:
declare the following apparatus:
Product name :
Model name :
ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY ASUS Phone ASUS_Z00VD conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive EN 55022:2010 / AC:2011 EN 61000-3-2:2014 EN 55013:2001+A1:2003+A2:2006 1999/5/EC-R&TTE Directive EN 300 328 V1.8.1(2012-06) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1(2011-05) EN 301 908-2 V6.2.1(2011-07) EN 301 893 V1.7.1(2012-06) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001+A1:2012 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 62209-1:2006 EN 62209-2:2010 2006/95/EC-LVD Directive EN 60950-1: 2009 / A1: 2010 EN 60950-1: 2006 / A11: 2009 EN 50332-1: 2013 2009/125/EC-ErP Directive EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) EN 50566:2013/AC:2014 EN 60950-1: 2010 / A12: 2011 EN 60065:2002 / A12: 2011 EN 50332-2: 2013 Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009 Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013 2011/65/EU-RoHS Directive Ver. 150326 CE marking 0560
(EC conformity marking) Position : CEO Name : Jerry Shen Declaration Date: 08/06/2015 Year to begin affixing CE marking: 2015 Signature : __________ EC Declarao de Conformidade Ns, os abaixo assinados, Fabricante:
Morada:
Representante autorizado na Europa:
Morada, Cidade:
Pas:
declaramos que o seguinte produto:
ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Nome do Produto :
Modelo :
ASUS Phone ASUS_Z00VD se encontra em conformidade com as exigncias essenciais das seguintes directrizes:
2004/108/EC-EMC Directiva EN 55022:2010 / AC:2011 EN 61000-3-2:2014 EN 55013:2001+A1:2003+A2:2006 1999/5/EC-R&TTE Directiva EN 300 328 V1.8.1(2012-06) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1(2011-05) EN 301 908-2 V6.2.1(2011-07) EN 301 893 V1.7.1(2012-06) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001+A1:2012 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 62209-1:2006 EN 62209-2:2010 2006/95/EC-LVD Directiva EN 60950-1: 2009 / A1: 2010 EN 60950-1: 2006 / A11: 2009 EN 50332-1: 2013 2009/125/EC-ErP Directiva EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) EN 50566:2013/AC:2014 EN 60950-1: 2010 / A12: 2011 EN 60065:2002 / A12: 2011 EN 50332-2: 2013 Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009 Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013 2011/65/EU-RoHS Directiva Ver. 150326 Marca de CE 0560
(Marca de Conformidade EC) Posio : CEO Nome : Jerry Shen EC Declaratie de Conformitate Noi, subsemnaii, Productor:
Adres:
Reprezentant autorizat n Europa:
Adres, Ora:
ar:
declarm c urmtorul aparat:
Nume produs:
Nume model:
este conform cu cerinele eseniale ale urmtoarelor directive:
ASUS Phone ASUS_Z00VD ASUSTeK COMPUTER INC. Strada PEITOU Nr 150, Li-TE etaj 4, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH Strada HARKORT Nr 21-23, RATINGEN 40880 Germania Directiva 2004/108/EC-EMC EN 55022:2010 / AC:2011 EN 61000-3-2:2014 EN 55013:2001+A1:2003+A2:2006 Directiva 1999/5/EC-R&TTE EN 300 328 V1.8.1(2012-06) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1(2011-05) EN 301 908-2 V6.2.1(2011-07) EN 301 893 V1.7.1(2012-06) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001+A1:2012 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 62209-1:2006 EN 62209-2:2010 Directiva 2006/95/EC-LVD EN 60950-1: 2009 / A1: 2010 EN 60950-1: 2006 / A11: 2009 EN 50332-1: 2013 Directiva 2009/125/EC-ErP EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) EN 50566:2013/AC:2014 EN 60950-1: 2010 / A12: 2011 EN 60065:2002 / A12: 2011 EN 50332-2: 2013 Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009 Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013 Directiva 2011/65/EU-RoHS Ver. 150326 nsemnul CE 0560
(nsemnul de conformitate EC) Poziia: CEO Nume: Jerry Shen Data declaraiei: 08/06/2015 Anul aplicrii nsemnului CE: 2015 Semntura: __________ Biz, bu imza altndakiler retici:
Adres:
Avrupadaki Yetkili:
Adres, ehir:
lke:
Aadaki rnn rn ad :
EC Uygunluk Beyan ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN ALMANYA ASUS Phone ASUS_Z00VD Model ad :
Aadaki direktiflerin gereksinimlerine uyduunu deklare ederiz:
2004/108/EC-EMC Direktifi EN 55022:2010 / AC:2011 EN 61000-3-2:2014 EN 55013:2001+A1:2003+A2:2006 1999/5/EC-R&TTE Direktifi EN 300 328 V1.8.1(2012-06) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1(2011-05) EN 301 908-2 V6.2.1(2011-07) EN 301 893 V1.7.1(2012-06) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001+A1:2012 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 62209-1:2006 EN 62209-2:2010 2006/95/EC-LVD Direktifi EN 60950-1: 2009 / A1: 2010 EN 60950-1: 2006 / A11: 2009 EN 50332-1: 2013 2009/125/EC-ErP Direktifi EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) EN 50566:2013/AC:2014 EN 60950-1: 2010 / A12: 2011 EN 60065:2002 / A12: 2011 EN 50332-2: 2013 Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009 Regulation (EC) No. 642/2009 Regulation (EU) No. 617/2013 2011/65/EU-RoHS Direktifi Ver. 150326 CE iareti 0560
(EC uygunluk iareti) Pozisyon : CEO sim : Jerry Shen Data de declarao: 08/06/2015 Ano para comear a aposio da marca CE: 2015 Assinatura : __________ Deklarasyon Tarihi: 08/06/2015 CE aretinin Eklendii Yl: 2015 mza : __________ CE Mark Warning Using GPS (Global Positioning System) on your ASUS Phone CE marking for devices with wireless LAN/
Bluetooth This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.The highest CE SAR values for the device are as follows:
0.412 W/Kg (Head) 0.517 W/Kg (Body) To use the GPS positioning feature on your ASUS Phone:
Ensure that your device is connected to the Internet before using Google Map or any GPS-
enabled apps. For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance. Specific Absorption Rate (SAR) Prevention of Hearing Loss Band GSM900 GSM1800 Band VIII Band I 2.4GHz WLAN Head SAR- 10g
(W/kg) Body SAR- 10g
(W/kg) 0.412 0.292 0.346 0.380 0.150 0.517 0.242 0.394 0.348 0.028 To prevent possible hearing damage, do not listen at high volume levels for long periods. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1. Address: 150 Li-Te Road, Peitou, Taipei, Taiwan ASUS Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us. Sincerely yours, ASUSTeK COMPUTER INC. Tel: 886228943447 Fax: 886228907698 Support:
http://vip.asus.com/eservice/techserv.aspx Copyright 2015 ASUSTeK COMPUTER INC. All Rights Reserved. You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php) 15060-xxxxxxxx