WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5832699.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Quick Start Guide ASUS ZenWiFi Pro XT12 AX11000 Tri Band Router Model: XT12 Before Setup Preparing to set up an AiMesh WiFi system 1 Find two ZenWiFi Pro XT12, and power both on. 2 Use a network cable to connect your optical modem to the WAN port of either ZenWiFi Pro XT12. This ZenWiFi Pro XT12 will be the AiMesh router, and the other ZenWiFi Pro XT12 will be the AiMesh node. 3 The LEDs turn solid blue to indicate that ZenWiFi Pro XT12 is ready for setup. ASUS Router App Download free ASUS Router APP to set up and manage your router(s). AiMesh Setup Steps 01 Prepare Place your AiMesh router and node(s) in the same room and at least 1 meter apart during the setup process. 02 AiMesh node Keep your AiMesh node powered on and standby for AiMesh system settings. Hardware Explanations 1 Plug the adapter into the DCIN port, and press the power switch. 2 The power LED will light up when your hardware is ready. Button and Port Explanations LAN ports 1-2 2.5G / 1G WAN port 2.5G / 1G LAN port Specifications:
WPS button Reset button Power switch DCIN port LAN ports 1-2 Connect your PC to a LAN port with a network cable. 2.5G / 1G WAN port Connect your optical modem to this port with a network cable. 2.5G / 1G LAN port Connect your PC to a 2.5G / 1G LAN port with a network cable. DC Power adapter DC Output: +19V with max 2.37A current
+19.5V with max 2.31A current Operating Temperature 0~40oC Storage Temperature 0~70oC Operating Humidity 50~90%
Storage Humidity 20~90%
AiMesh node AiMesh router AiMesh Setup Steps 1 meter apart AiMesh node AiMesh router 03 Enabling Bluetooth Enable Bluetooth on your phone. 04 Launching ASUS Router APP Launch ASUS Router APP, and then follow the on-screen in-
structions to finish the AiMesh setup. Troubleshooting If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again. a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters. b Your AiMesh node is powered on. Relocation THE BEST PERFORMANCE Locate the AiMesh router and node at the best place. ZenWiFi Pro XT12 LED indications Solid white: Good signal Solid yellow: Weak signal Solid red: No signal NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens. We recommend that you place the routers in an open or spacious location. FAQ FREQUENTLY ASKED QUESTIONS Q1: Does the AiMesh router support Access Point mode?
Q2:
Could I setup wired connection between AiMesh routers (Ethernet backhaul)?
A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://router.asus.com), and go to the page Administration > Operation Mode. A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone. 1 Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first. 2 Place the node in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of AiMesh node. Modem LAN-WAN 3 AiMesh system will auto-select the best path for data transmission, whether wired or wireless. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/
english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. FCC regulations restrict the operation of this device to indoor use only. This device cannot operate as a subordinate between separate buildings or structures. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 62 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B) Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 62 cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canadas REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 5150 5250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. CAN ICES-003(B)/NMB-003(B) Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite d'exposition aux frquences radio d'Innovation, Sciences et Dveloppement conomique du Canada (ISED). Utilisez l'appareil sans fil de faon minimiser les contacts humains lors d'un fonctionnement normal. Cet quipement doit tre install et utilis avec un minimum de 62 cm de distance entre la source de rayonnement et votre corps. L'utilisation de cet appareil est autorise au Canada. Pour consulter l'entre correspondant l'appareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Dveloppement conomique du Canada, rendez-vous sur :
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Pour des informations supplmentaires concernant l'exposition aux frquences radio au Canada, rendez-vous sur :
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html For product available in the US/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis et au Canada, seuls les canaux 1 11 peuvent tre utiliss. La slection dautres canaux nest pas possible. This device is restricted for indoor use only. Cet appareil convient uniquement un usage intrieur. Safety Notices Use this product in environments with ambient temperatures between 0C(32F) and 40C(104F). Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT place or drop objects on top and do not shove any foreign objects into the product. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms. DO NOT cover the vents on the product to prevent the system from getting overheated. DO NOT use damaged power cords, accessories, or other peripherals. If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. Manufacturer Authorised representative in Europe Authorised distributors in Turkey Utilisez ce produit dans un environnement dont la temprature ambiante est comprise entre 0C (32F) et 40C
(104F). Rfrez-vous l'tiquette situe au dessous du produit pour vrifier que l'adaptateur secteur rpond aux exigences de tension. NE PAS placer sur une surface irrgulire ou instable. Contactez le service aprs-vente si le chssis a t endommag. NE PAS placer, faire tomber ou insrer d'objets sur/dans le produit. NE PAS exposer l'appareil la pluie ou l'humidit, tenez-le distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destines la ventilation du systme pour viter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres priphriques endommags. Si l'adaptateur est endommag, n'essayez pas de le rparer vous-mme. Contactez un technicien lectrique qualifi ou votre revendeur. Pour viter tout risque de choc lectrique, dbranchez le cble d'alimentation de la prise lectrique avant de toucher au systme. ASUSTeK Computer Inc. Tel. No.: +886-2-2894-3447 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan ASUS Computer GmbH Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY BOGAZICI BILGISAYAR TICARET VE SANAYI A.S. Tel./FAX No.:
Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN HAN B BLOK NO.121 SISLI, ISTANBUL 34394
+90 212 331 10 00 / +90 212 332 28 90 CIZGI Elektronik San. Tic. Ltd. Sti. Tel./FAX No.:
Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/ISTANBUL
+90 212 356 70 70 / +90 212 356 70 69 KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S. Tel. No.: +90 216 5288888 Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL ENDEKS BLM SAN VE DI TC LTD T Tel./FAX No.:
Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI, G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE,
+90 216 523 35 70 / +90 216 523 35 71 ISTANBUL PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S Tel./FAX No.:
Address: ORGANIZE SANAYI BOLGESI NATO YOLU 4.CADDE NO:1 UMRANIYE, ISTANBUL 34775
+90 216 528 0000