FCC ID: MSQ-RTAXJG00 AX5400 Dual Band WiFi Router

 

Hardware Explanations

1 Plug the adapter into the DCIN port.

2 The power LED will light up when your hardware is ready.

Button and Port Explanations

LAN ports 1~3

DCIN port

WAN port

Specifications:

DC Power adapter

DC Output: +12V with max 2A current

Operating Temperature

0~40oC

Storage

0~70oC

Operating Humidity

50~90%

Storage

20~90%

WAN port

Connect your modem to this port with

a network cable.

LAN ports 1~3

Connect your PC to a LAN port with a

network cable.

Quick

Start Guide

ASUS ZenWiFi XD6

AX5400 Dual Band WiFi Router

Model: XD6

Before Setup

Preparing to set up an AiMesh WiFi system

1 Find two ZenWiFi XD6, and power them on.

2 Use a network cable to connect your optical modem to the WAN port of either ZenWiFi XD6. This

ZenWiFi XD6 will be the AiMesh router, and the other ZenWiFi XD6 will be the AiMesh node.

3 The LED turns solid blue to indicate that ZenWiFi XD6 is ready for setup.

ASUS Router App

Download free ASUS Router APP to set up and manage your router(s).

AiMesh node

AiMesh router

AiMesh Setup Steps

AiMesh Setup Steps

01

Prepare

Place your ZenWiFi XD6 router and node within 3 meters of each oth-

er during the setup process.

02

AiMesh node

Keep your AiMesh node powered on and standby for AiMesh system

settings.

03

Launching ASUS Router APP

Launch ASUS Router APP, and then follow the on-screen instructions

to finish the AiMesh setup.

Troubleshooting

within

3 meters

AiMesh node

AiMesh router

If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.

a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.

b Your AiMesh node is powered on.

Relocation THE BEST PERFORMANCE

Locate the AiMesh router and node at the best place.

ZenWiFi XD6 LED indications

Your ZenWiFi XD6 is ready for setup.

Your ZenWiFi XD6 is online and works well.

Solid blue:

Solid white:

Solid yellow:

Solid red:

To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices

and microwave ovens.

The signal between your ZenWiFi XD6 router and the node is weak.

We recommend that you place the routers in an open or spacious location.

Your ZenWiFi XD6 router has no Internet connection. / Your node is disconnected from the router.

Wall-mount the ZenWiFi XD6

FAQ

FREQUENTLY ASKED QUESTIONS

NOTES:

1

m

m

5

.

1

6

.

4

2

Diameter

7.7 0.7mm

Diameter

6 0.5mm

Diameter

3.1 0.5mm

Q1:

Does the AiMesh router support Access Point mode?

A: Yes. You can choose to set the AiMesh router as

router mode or access point mode. Please go to web

GUI (http://router.asus.com), and go to the page

Administration > Operation Mode.

2

Q2:

Could I setup wired connection between AiMesh routers (Ethernet backhaul)?

Diameter

8.5 0.2mm

2.3 0.1mm

25.0 0.3mm

A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize

throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then

determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone.

r

e

t

e

m

a

D

i

m

m

1

.

0

5

.

3

1 Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first.

IMPORTANT:

Only install the wall mount vertically on the wall. Do not install

the wall mount horizontally or on the ceiling.

3

NOTES:

Wall anchor and screws sizes are for reference only.

It is recommended to use the attached anchor and screws.

2 Place the node in the ideal locations for best coverage. Run an Ethernet

cable from the LAN port of the AiMesh router to the WAN port of AiMesh

node.

3 AiMesh system will auto-select the best path for data transmission,

whether wired or wireless.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our

environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other

components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed

recycling information in different regions.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel

mobile satellite systems.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we

published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

CAN ICES-003(B)/NMB-003(B)

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

CAN ICES-003(B)/NMB-003(B)

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain

compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the

antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24 cm from all

persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).

• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.

• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

• DO NOT place or drop objects on top and do not shove any foreign objects into the product.

• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

• DO NOT cover the vents on the product to prevent the system from getting overheated.

• DO NOT use damaged power cords, accessories, or other peripherals.

• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

• DO NOT mount this equipment higher than 2 meters.

• Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0˚C (32°F) et 40˚C (104°F).

• Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de

tension.

NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.

•

• NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit.

• NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un

• NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe.

• NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés.

• Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou

• Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au

orage.

votre revendeur.

système.

• Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development

Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential

for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 28 cm between the radiator any part of your

body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development

Canada’s REL (Radio Equipment List) can be found at the following web address:

http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure also can be found at the following web:

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)

Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit

pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

La bande 5150 – 5250 MHz est réservée uniquement pour une utilisation à l’intérieur afin de réduire les risques de

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Informations concernant l’exposition aux fréquences radio (RF)

La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d'exposition aux fréquences radio

d'Innovation, Sciences et Développement économique du Canada (ISED). Utilisez l'appareil sans fil de façon à minimiser les

contacts humains lors d'un fonctionnement normal.

Cet équipement doit être installé et utilisé avec un minimum de 28 cm de distance entre la source de rayonnement et votre

corps.

L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste

d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développement économique du Canada,

rendez-vous sur :

http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Pour des informations supplémentaires concernant l'exposition aux fréquences radio au Canada, rendez-vous sur : https://

www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

For product available in the US/Canada market, only channel 1~11 can be operated. Selection of other channels is not

possible.

Pour les produits disponibles aux États-Unis et au Canada, seuls les canaux 1 à 11 peuvent être utilisés. La sélection d’autres

canaux n’est pas possible.

This device is restricted for indoor use only.

Cet appareil convient uniquement à un usage intérieur.

Manufacturer

ASUSTeK Computer Inc.

Tel:

Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan

+886-2-2894-3447

Authorised representative

in Europe

ASUS Computer GmbH

Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY

Authorised distributors in

Turkey

+90 212 356 70 70 / +90 212 356 70 69

+90 212 331 10 00 / +90 212 332 28 90

BOGAZICI BILGISAYAR TICARET VE SANAYI A.S.

Tel./FAX No.:

Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN HAN B BLOK NO.121 SISLI, ISTANBUL 34394

CIZGI Elektronik San. Tic. Ltd. Sti.

Tel./FAX No.:

Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/ISTANBUL

KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S.

Tel. No.:

Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL

ENDEKS BİLİŞİM SAN VE DIŞ TİC LTD ŞTİ

Tel./FAX No.:

Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI, G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE,

+90 216 523 35 70 / +90 216 523 35 71

+90 216 5288888

ISTANBUL

PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S

Tel./FAX No.:

Address: ORGANIZE SANAYI BOLGESI NATO YOLU 4.CADDE NO:1 UMRANIYE, ISTANBUL 34775

+90 216 528 0000



 

 

 

 

 

 

 

 

 

 

7 TUS SARMRHARAR WiFi Name: ASUS XX AX5400 Dual Band WiFi Router AX5400 SSSA RARER EES PIN Code : 56976649 Model/#2# : XD6 MAC: BCAEC5C7DA08C8CBO Input/#A : 12V === 2A PN: 90IGO6FO-MO3R40 C8CBO jain:

Frequency/#8/E98% : 2.4GHz/SGHz S/N: LBICJKO00001 Production Year:

Mi in Chil Router IP address: TOT lade in China

|http://router.asus.com C FAL Gcoowrryyzew O JASUSTek Computer Inc.

SdM ASUS 1F., No. 15, Lide Rd., Beitou ZenWiFi XD6

, ore : Oy FCC ID: MSQ-RTAXJGOO Dist., Taipei City 112, Taiwan mm NGM, 955005. [CSscan-retaxsco0 CAN Ices-3 (8) NMB-3(6)

 

 

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Class II Change Letter Date: 2021/11/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Request for Class II Permissive Change FCC ID: MSQ-RTAXJG00 / Grant Date: 02/17/2021 Modification:

Add a new model name: XD6S Model Name ZenWiFi XD6 ASUS ZenWiFi XD6 RT-AX5400 XD6 Respectfully, Pursuant to CFR 2.1043, ASUSTeK COMPUTER INC. hereby requests a Class II Permissive Change. Chipset BCM6750 Flash 256MB LAN Ethernet port LAN x 3 XD6S NoteThe models ZenWiFi XD6, ASUS ZenWiFi XD6,RT-AX5400 and XD6 are identical, the BCM6752 LAN x 1 128MB different model names served as marketing strategy. Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Signature

Name and Job Title Jackson Yen / Associate Vice President

Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364 E-Mail Tel Fax

 

 

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Confidential Letter Date: 2021/11/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDMSQ-RTAXJG00 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Block Diagrams Schematics The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Test Setup photos Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Signature

Name and Job Title Jackson Yen / Associate Vice President

Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364 E-Mail Tel Fax

 

 

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Power of Attorney Date: 2021/11/1 I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Address

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Dear Sir, Sporton International Inc. Name

Leo Huang Job Title

: Manager FCC ID: MSQ-RTAXJG00 Respectfully, e-mail

Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Signature

Name and Job Title Jackson Yen / Associate Vice President

Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364 E-Mail Tel Fax

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan SDoC Attestation Letter Date: 2021/2/2 We ASUSTeK COMPUTER INC., as the grantee of this project (FCC ID: MSQ-RTAXJG00 / Brand Name:

ASUS / Model No.: ZenWiFi XD6, ASUS ZenWiFi XD6, RT-AX5400, XD6), would like to declare that the composite portion has been authorized under the Supplier's Declaration of Conformity procedures

(Sporton report No.: FD0D0706, FCC designation number: TW1096). The final product shall consequently comply with the FCC rule applied for SDoC Procedure. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

 

 

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan TPC Declaration Letter Date: 2021/2/2 FCC IDMSQ-RTAXJG00 To Whom It May Concern:

sold to FCC market. We, ASUSTeK COMPUTER INC., declare that the device supports the TPC function in final F/W when EUT is Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364