FCC ID: MSQ-RTAXIC00 AXE6600 Tri Band WiFi Router

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5164066.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Quick Start Guide ASUS ZenWiFi ET8 AXE6600 Tri Band WiFi Router Model: ET8 Before Setup Preparing to set up an AiMesh WiFi system 1 Find two ZenWiFi ET8, and power both on. 2 Use a network cable to connect your optical modem to the WAN port of either ZenWiFi ET8. This ZenWiFi ET8 will be the AiMesh router, and the other ZenWiFi ET8 will be the AiMesh node. 3 The LED turns solid blue to indicate that ZenWiFi ET8 is ready for setup. ASUS Router App Download free ASUS Router APP to set up and manage your router(s). AiMesh Setup Steps 01 Prepare Place your AiMesh router and node within 3 meters of each other during the setup process. 02 AiMesh node Keep your AiMesh node powered on and standby for AiMesh system settings. Hardware Explanations 1 Plug the adapter into the DCIN port, and press the power button. 2 The power LED will light up when your hardware is ready. Button and Port Explanations DC-IN port Power button LAN ports 1-3 USB 3.0/2.0 port 2.5G / 1G WAN port 2.5G / 1G WAN port Connect your optical modem to this port with a network cable. LAN ports 1-3 Connect your PC to a LAN port with a network cable. Specifications:

DC Power adapter DC Output: +19V with max 1.75A current Operating Temperature 0~40oC Operating Humidity 50~90%

Storage Storage 0~70oC 20~90%

AiMesh node AiMesh router AiMesh Setup Steps within 3 meters AiMesh node AiMesh router 03 Enabling Bluetooth Enable Bluetooth on your phone. 04 Launching ASUS Router APP Launch ASUS Router APP, and then follow the on-screen instructions to finish the AiMesh setup. NOTE: When youre using a wireless backhaul to connect your router and AiMesh node, the WAN port on your AiMesh node can be used as a LAN port providing up to 2.5G transmission speed. Troubleshooting If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again. a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters. b Your AiMesh node is powered on. Relocation THE BEST PERFORMANCE Locate the AiMesh router and node at the best place. ZenWiFi AX LED indications Solid white: Good signal Solid yellow: Weak signal Solid red: No signal NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens. We recommend that you place the routers in an open or spacious location. FAQ FREQUENTLY ASKED QUESTIONS Q1: Does the AiMesh router support Access Point mode?

Q2:

Could I setup wired connection between AiMesh routers (Ethernet backhaul)?

A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://router.asus.com), and go to the page Administration > Operation Mode. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/

english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone. 1 Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first. 2 Place the node in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of AiMesh node. Modem LAN-WAN 3 AiMesh system will auto-select the best path for data transmission, whether wired or wireless. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-

channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B) Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 30 cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canadas REL (Radio Equipment List) can be found at the following web address:

http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF exposure also can be found at the following web:

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 5150 5250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. CAN ICES-003(B)/NMB-003(B) Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite d'exposition aux frquences radio d'Innovation, Sciences et Dveloppement conomique du Canada (ISED). Utilisez l'appareil sans fil de faon minimiser les contacts humains lors d'un fonctionnement normal. Cet quipement doit tre install et utilis avec un minimum de 30 cm de distance entre la source de rayonnement et votre corps. L'utilisation de cet appareil est autorise au Canada. Pour consulter l'entre correspondant l'appareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Dveloppement conomique du Canada, rendez-vous sur :

http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Pour des informations supplmentaires concernant l'exposition aux frquences radio au Canada, rendez-vous sur :

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html For product available in the US/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis et au Canada, seuls les canaux 1 11 peuvent tre utiliss. La slection dautres canaux nest pas possible. WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted for indoor use only. Cet appareil convient uniquement un usage intrieur. Safety Notices Use this product in environments with ambient temperatures between 0C(32F) and 40C(104F). Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT place or drop objects on top and do not shove any foreign objects into the product. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms. DO NOT cover the vents on the product to prevent the system from getting overheated. DO NOT use damaged power cords, accessories, or other peripherals. If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. Utilisez ce produit dans un environnement dont la temprature ambiante est comprise entre 0C (32F) et 40C

(104F). Rfrez-vous l'tiquette situe au dessous du produit pour vrifier que l'adaptateur secteur rpond aux exigences de tension. NE PAS placer sur une surface irrgulire ou instable. Contactez le service aprs-vente si le chssis a t endommag. NE PAS placer, faire tomber ou insrer d'objets sur/dans le produit. NE PAS exposer l'appareil la pluie ou l'humidit, tenez-le distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destines la ventilation du systme pour viter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres priphriques endommags. Si l'adaptateur est endommag, n'essayez pas de le rparer vous-mme. Contactez un technicien lectrique qualifi ou votre revendeur. Pour viter tout risque de choc lectrique, dbranchez le cble d'alimentation de la prise lectrique avant de toucher au systme. Manufacturer Authorised representative in Europe Authorised distributors in Turkey ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan ASUS Computer GmbH Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY BOGAZICI BILGISAYAR TICARET VE SANAYI A.S. Tel./FAX No.:

Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN HAN B BLOK NO.121 SISLI, ISTANBUL 34394

+90 212 331 10 00 / +90 212 332 28 90 CIZGI Elektronik San. Tic. Ltd. Sti. Tel./FAX No.:

Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/ISTANBUL

+90 212 356 70 70 / +90 212 356 70 69 KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S. Tel. No.: +90 216 5288888 Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL ENDEKS BLM SAN VE DI TC LTD T Tel./FAX No.:

Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI, G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE,

+90 216 523 35 70 / +90 216 523 35 71 ISTANBUL PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S Tel./FAX No.:

Address: ORGANIZE SANAYI BOLGESI NATO YOLU 4.CADDE NO:1 UMRANIYE, ISTANBUL 34775

+90 216 528 0000

= semen AXE6600 Tri Band WiFi Router 8 ee er wee fa Te Cuta ye i::) Rasa ard Router IP address: http://router.asus.com Input/9 A : 19V ==1.75A FE Sines 8 Sa a) SCC s Cee cnn asta Mee ase Coe!

Oe eC Including interference that may cause undesired operation BELO ASUSTek COMPUTER INC. 1f, No.1, IDERD, BEITOU DIST, TAIPEICITY 112, TAIWAN. ASUS COMPUTER GmbH; HARKORT STR, 21-23, 40880 RATINGEN, GERMANY Cura nn

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Confidential Letter Date: 2021/2/2 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDMSQ-RTAXIC00 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Block Diagrams Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Test Setup photos Users Manuals Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Letter of Declaration on Indoor Access Point Operation Date: 2021/3/16 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC IDMSQ-RTAXIC00 To Whom It May Concern:

We, ASUSTeK COMPUTER INC., attest that this Indoor Access Point device complies with the following requirements of Part 15 E of the FCCs rules for the 6GHz bands:

Protocol attestation statement:

1. Protocol attestation statement:

An 11ax IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. 2. Statement acknowledging device restrictions:

a. This device is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. c. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Power of Attorney Date: 2021/2/2 Dear Sir, Certification. I hereby have entrusted the following person to be a proxy regarding application for Type Sporton International Inc. Address Name Job Title e-mail

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C.

: Leo Huang

: Manager

: Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: MSQ-RTAXIC00 Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan SDoC Attestation Letter Date: 2021/2/2 We ASUSTeK COMPUTER INC., as the grantee of this project (FCC ID: MSQ-RTAXIC00 / Brand Name: ASUS / Model No.: ET8, ZenWiFi ET8, ASUS ZenWiFi ET8), would like to declare that the composite portion has been authorized under the Supplier's Declaration of Conformity procedures (Sporton report No.: FD0D0913, FCC designation number: TW1096). The final product shall consequently comply with the FCC rule applied for SDoC Procedure. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Signature

Name and Job Title

: Jackson Yen / Associate Vice President E-Mail Tel Fax

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Letter of Declaration on Indoor Subordinate Operation Date: 2021/4/9 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC IDMSQ-RTAXIC00 To Whom It May Concern:

We, ASUSTeK COMPUTER INC., attest that this device under FCC ID MSQ-RTAXIC00 complies with device protocol requirements and operational restrictions:

Protocol attestation statement:

1. This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 2. Once under control of an indoor access point, a subordinate will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling the subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6PP. 3. An 11ax IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. 3. This device is prohibited for control of or communications with unmanned aircraft systems, 4. When configured for subordinate mode, this device has no direct connection to the internet.

: ASUSTeK COMPUTER INC.

: 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan including drones. Respectfully, Applicants company name Applicants company address Signature

Name and Job Title E-Mail Tel Fax

: Jackson Yen / Associate Vice President

: Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364