FCC ID: MSQ-G35CG Desktop PC

Desktop PC User Guide G35CG E22158 Revised Edition v4 June 2023 Copyright 2023 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (ASUS). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe. SERVICE AND SUPPORT Visit our multi-language website at https://www.asus.com/support/. 2 Contents Notices ................................................................................................................................................ 4 Safety information ........................................................................................................................... 9 Conventions used in this guide.................................................................................................10 Where to find more information ...............................................................................................10 Package contents ...........................................................................................................................11 Chapter 1 Welcome! ...........................................................................................................................................13 Getting started Getting to know your computer ...............................................................................................13 Installing a swappable Solid State Drive (SSD) ....................................................................16 Setting up your computer...........................................................................................................28 Turning your computer ON ........................................................................................................31 Chapter 2 Connecting a USB storage device ............................................................................................33 Connecting devices to your computer Connecting microphone and speakers ..................................................................................34 Connecting multiple external displays ..................................................................................36 Connecting an HDTV ....................................................................................................................37 Chapter 3 Proper posture when using your Desktop PC ......................................................................39 Using your computer Chapter 4 Wired connection ...........................................................................................................................41 Connecting to the Internet Chapter 5 Troubleshooting .............................................................................................................................45 Troubleshooting Appendix Starting for the first time .............................................................................................................53 Working with Windows Start menu ........................................................................................................................................53 Windows apps ...............................................................................................................................54 Connecting to wireless networks .............................................................................................54 Connecting to wired networks ..................................................................................................55 Turning your computer off .........................................................................................................55 Putting your computer to sleep ................................................................................................55 3 Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference; and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Lithium Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions. 4 Avertissement relatif aux batteries Lithium ATTENTION ! Danger dexplosion si la batterie nest pas correctement remplace. Remplacer uniquement avec une batterie de type semblable ou quivalent, recommande par le fabricant. Jeter les batteries usages conformment aux instructions du fabricant. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science, and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device:

Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B) Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canadaapplicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 5150 5250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. CAN ICES-003(B)/NMB-003(B) IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-

causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Dclaration de conformit dIndustrie Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Le prsent appareil est conforme aux normes CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas crer dinterfrences et (2) cet appareil doit tolrer tout type dinterfrences, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. 5 Dclaration du Dpartement Canadien des Communications Cet appareil numrique ne dpasse pas les limites de classe B en terme dmissions de nuisances sonores, par radio, par des appareils numriques, et ce conformment aux rgulations dinterfrence par radio tablies par le dpartement canadien des communications. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. VCCI: Japan Compliance Statement VCCI Class B Statement This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver, it may cause radio interference. Install and use equipment according to the instruction manual. Equipment registered based on the confirmation measurement at the user installation site. This is a product for which interference was measured at the present installation site and confirmed to comply with the standard of Voluntary Control Council for Interference by Information Technology Equipment (VCCI). Before using the equipment at any location other than the present installation site, the member shall measure interference for confirmation and register the result to VCCI. India E-Waste (Management) Rules 2016 This product complies with the India E-Waste (Management) Rules, 2016 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01 %

by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule. KC: Korea Warning Statement 6 RF Equipment Notices CE: European Community Compliance Statement The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0300 GHz). Wireless Radio Use This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band. Exposure to Radio Frequency Energy The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized. FCC Bluetooth Wireless Compliance The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NCC: Wireless Statement Japan RF Equipment Statement KC (RF Equipment) FCC RF Exposure information This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. FCC RF Caution Statement WARNING: Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. 7 Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/. The Wi-Fi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below:

AT DE LV NO FI BE IS LI PL SE BG IE LT PT CH CZ IT LU RO HR DK EL HU SI UK (NI) EE ES MT SK FR CY NL TR Simplified UKCA Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/. The Wi-Fi operating in the band 5150-5350MHz shall be restricted to indoor use for the country listed below:

UK Regional notice for Singapore Complies with IMDA Standards DB103778 This ASUS product complies with IMDA Standards. Optical Drive Safety Information Laser Safety Information CD-ROM Drive Safety Warning CLASS 1 LASER PRODUCT WARNING! To prevent exposure to the optical drives laser, do not attempt to disassemble or repair the optical drive by yourself. For your safety, contact a professional technician for assistance. 8 Service warning label WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CDRH Regulations The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States. WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser product installation guide may result in hazardous radiation exposure. Coating Notice IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. Safety information Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak. DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop PC. DO NOT expose to strong magnetic or electrical fields. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms. Battery safety warning: DO NOT throw the battery in fire. DO NOT short circuit the contacts. DO NOT disassemble the battery. Use this product in environments with ambient temperatures between 5C (41F) and 40C

(104F). DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated. DO NOT use damaged power cords, accessories, or other peripherals. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit. 9 Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. When you need to check product information, the marking is located at the bottom of the equipment. Hazardous moving parts. Desktop should be completely shutdown before servicing product. Replacing fan components should only be attempted by qualified service personnel. Hazardous Moving Parts Warning WARNING: Keep fingers and other body parts away from any moving parts. Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS website www.asus.com. ASUS Local Technical Support Visit ASUS website at https://www.asus.com/support/contact for the contact information of local Technical Support Engineer. 10 Package contents Desktop PC G35CG Keyboard x1 (optional) Mouse x1 (optional) I n s t a ll a ti o n G u i d e Power cord x1 Installation Guide x1 Warranty Card x1 If any of the above items is damaged or missing, contact your retailer. The illustrated items above are for reference only. Actual product specifications may vary with different models. 11 12 Chapter 1 Getting started Welcome!

Thank you for purchasing the ASUS Desktop PC!

The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and user-

centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing. Read the ASUS Warranty Card before setting up your ASUS Desktop PC. Getting to know your computer Illustrations are for reference only. The ports, their locations and the chassis color vary with different models. IMPORTANT! Do not use this Desktop PC for cryptocurrency mining (consuming a vast amount of electricity and time to gain convertible virtual currency) and/or related activities. 13 ASUS Desktop PC Front & Top 14 Chapter 1: Getting startedENGLISHENGLISH 1. 2. 3. Power button. Press this button to turn on your computer. NFC detection area. Read information from a contactless card, NFC tag, or other NFC devices. USB 3.2 gen1 ports. The Universal Serial Bus 3.2 gen1 (USB 3.2 gen1) ports connect to USB 3.2 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others. DO NOT connect a keyboard / mouse to any USB 3.2 gen1 port when installing Windows operating system. Due to USB 3.2 gen1 controller limitations, USB 3.2 gen1 devices can only be used under a Windows OS environment and after USB 3.2 gen1 driver installation. USB 3.2 gen1 devices can only be used as data storage only. We strongly recommend that you connect USB 3.2 gen1 devices to USB 3.2 gen1 ports for faster and better performance for your USB 3.2 gen1 devices. 4. USB 3.2 gen1 Type-C ports. The Universal Serial Bus 3.2 gen1 (USB 3.2 gen1) Type-C ports connect to USB 3.2 gen1 Type-C devices. The output voltage of the USB 3.2 gen1 Type-C ports is 5V, 3A. 5. 6. 7. Microphone port. This port connects to a microphone. Headphone port. This port connects to a headphone or speaker. Headset hanger. Press to open the headset hanger (with maximum load up to 1kg) and hang your headset here. 15 ASUS Desktop PCENGLISHENGLISH Installing a swappable Solid State Drive (SSD) To install a swappable SSD 1. 2. 3. Open the SSD compartment cover. Push the swappable SSD gently into the SSD bay. Select a program from the AutoPlay window to access your files. You can only use the 7mm SSD in this module (optional). 16 Chapter 1: Getting startedENGLISHENGLISH Rear 1. DisplayPort. This port is for a DisplayPort-compatible device. Intel Core i9-11900KF Intel Core i7-11700KF Intel Core i7-11700 DisplayPort Not supported Not Supported Support HDMI Not supported Not Supported Support 2. 3. 4. 5. 6. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. Clear CMOS button. Press this button to clear the BIOS setup information only when the system hangs due to overclocking. BIOS FlashBackTM button. Press the BIOS FlashBackTM button for three seconds until the BIOS FlashBackTM LED blinks three times, indicating that the BIOS FlashBackTM function is enabled. USB 3.2 gen1 ports. The Universal Serial Bus 3.2 gen1 (USB 3.2 gen1) ports connect to USB 3.2 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others. USB 3.2 gen2 Type-C port. The Universal Serial Bus 3.2 gen2 (USB 3.2 gen2) Type-C port connects to USB 3.2 gen2 Type-C devices. The output voltage of the USB 3.2 gen2 Type-C port is 5V, 3A. 7. USB 3.2 gen2x2 Type-C port. The Universal Serial Bus 3.2 gen2x2 (USB 3.2 gen2x2) Type-C port connects to USB 3.2 gen2x2 Type-C devices. The output voltage of the USB 3.2 gen2x2 Type-C port is 5V, 3A. 17 ASUS Desktop PCENGLISHENGLISH 8. 9. Optical S/PDIF Out port. This port connects to the optical S/PDIF devices. Rear Speaker Out port (black). This port connects to the rear speakers in a 4, 5.1, and 7.1-channel audio configuration. 10. Center/Subwoofer port (orange). This port connects to the center/subwoofer speakers. 11. Microphone port (pink). This port connects to a microphone. 12. 13. Line Out port (lime). This port connects to a headphone or speaker. In a 4, 5.1, or 7.1-channel configuration, the function of this port becomes Front Speaker Out. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources. Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 5.1, or 7.1-channel configuration. Audio 2, 4, 5.1, or 7.1-channel configuration Port Headset 2-channel 4-channel 5.1-channel 7.1-channel Light Blue Line In Line In Line In Side speaker Lime Pink Orange Black Line Out Mic In Front Speaker Out Front Speaker Out Front Speaker Out Mic In Mic In Mic In Center/Subwoofer Center/Subwoofer Rear Speaker Out Rear Speaker Out Rear Speaker Out 14. Power connector. Plug the power cord to this connector. RATING:

115Vac/230Vac, 9A/4.5A, 50/60Hz. 15. 16. Power switch. Switch to turn ON/OFF the power supply to your computer. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card. PCIEX16_1 slot supports graphics cards and storage devices only while other PCIE slots support storage devices and other PCIe devices. Install the primary graphics card in PCIEX16_1 if you use two graphics cards. PCIEX16_1 PCIEX1_1 PCIEX16_2 PCIEX1_2 Refer to Installing a graphics card in your computer for detailed instructions. 18 Chapter 1: Getting startedENGLISHENGLISH 17. ASUS Graphics Cards (on selected models only). The display output ports on these optional ASUS Graphics Cards may vary with different models. 18. Wi-Fi ports. Connect the ASUS Wi-Fi antenna connectors to these ports. 19. LAN (RJ-45) port. This port allows 2.5 Gbps Ethernet connection to a Local Area Network

(LAN) through a network hub. LAN port LED indications Activity/Link LED Description Status No link OFF GREEN Linked BLINKING Data activity ORANGE Speed LED Status OFF GREEN Description 100Mbps connection 2.5 Gbps connection 1Gbps / 100 Mbps / 10 Mbps connection ACT/LINK LED SPEED LED LAN port 20. USB 3.2 gen2 ports. The Universal Serial Bus 3.2 gen2 (USB 3.2 gen2) ports connect to USB 3.2 gen2 devices such as a mouse, printer, scanner, camera, PDA, and others. 21. Air vents. These vents allow air ventilation. DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer. 22. USB 2.0 port. The Universal Serial Bus 2.0 (USB 2.0) port connects to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. 23. USB port with BIOS FlashBackTM function. Insert a USB storage device to this USB port to run BIOS FlashBackTM. 19 ASUS Desktop PCENGLISHENGLISH Rear (Axial Fan model) 1. DisplayPort. This port is for a DisplayPort-compatible device. Intel Core i9-11900KF Intel Core i7-11700KF Intel Core i7-11700 DisplayPort Not supported Not Supported Support HDMI Not supported Not Supported Support 2. 3. 4. 5. 6. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. Clear CMOS button. Press this button to clear the BIOS setup information only when the system hangs due to overclocking. BIOS FlashBackTM button. Press the BIOS FlashBackTM button for three seconds until the BIOS FlashBackTM LED blinks three times, indicating that the BIOS FlashBackTM function is enabled. USB 3.2 gen1 ports. The Universal Serial Bus 3.2 gen1 (USB 3.2 gen1) ports connect to USB 3.2 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others. USB 3.2 gen2 Type-C port. The Universal Serial Bus 3.2 gen2 (USB 3.2 gen2) Type-C port connects to USB 3.2 gen2 Type-C devices. The output voltage of the USB 3.2 gen2 Type-C port is 5V, 3A. 7. USB 3.2 gen2x2 Type-C port. The Universal Serial Bus 3.2 gen2x2 (USB 3.2 gen2x2) Type-C port connects to USB 3.2 gen2x2 Type-C devices. The output voltage of the USB 3.2 gen2x2 Type-C port is 5V, 3A. 20 Chapter 1: Getting startedENGLISHENGLISH 8. 9. Optical S/PDIF Out port. This port connects to the optical S/PDIF devices. Rear Speaker Out port (black). This port connects to the rear speakers in a 4, 5.1, and 7.1-channel audio configuration. 10. Center/Subwoofer port (orange). This port connects to the center/subwoofer speakers. 11. Microphone port (pink). This port connects to a microphone. 12. 13. Line Out port (lime). This port connects to a headphone or speaker. In a 4, 5.1, or 7.1-channel configuration, the function of this port becomes Front Speaker Out. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources. Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 5.1, or 7.1-channel configuration. Audio 2, 4, 5.1, or 7.1-channel configuration Port Headset 2-channel 4-channel 5.1-channel 7.1-channel Light Blue Line In Line In Line In Side speaker Lime Pink Orange Black Line Out Mic In Front Speaker Out Front Speaker Out Front Speaker Out Mic In Mic In Mic In Center/Subwoofer Center/Subwoofer Rear Speaker Out Rear Speaker Out Rear Speaker Out 14. Power connector. Plug the power cord to this connector. RATING:

115Vac/230Vac, 9A/4.5A, 50/60Hz. 15. Power switch. Switch to turn ON/OFF the power supply to your computer. 16. ASUS Graphics Cards (on selected models only). The display output ports on these optional ASUS Graphics Cards may vary with different models. 17. Wi-Fi ports. Connect the ASUS Wi-Fi antenna connectors to these ports. 18. LAN (RJ-45) port. This port allows 2.5 Gbps Ethernet connection to a Local Area Network

(LAN) through a network hub. LAN port LED indications Activity/Link LED Description Status No link OFF GREEN Linked BLINKING Data activity ORANGE Speed LED Status OFF GREEN Description 100Mbps connection 2.5 Gbps connection 1Gbps / 100 Mbps / 10 Mbps connection ACT/LINK LED SPEED LED LAN port 21 ASUS Desktop PCENGLISHENGLISH 19. Air vents. These vents allow air ventilation. DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer. 20. USB 3.2 gen2 ports. The Universal Serial Bus 3.2 gen2 (USB 3.2 gen2) ports connect to USB 3.2 gen2 devices such as a mouse, printer, scanner, camera, PDA, and others. 21. USB 2.0 port. The Universal Serial Bus 2.0 (USB 2.0) port connects to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. 22. USB port with BIOS FlashBackTM function. Insert a USB storage device to this USB port to run BIOS FlashBackTM. 22 Chapter 1: Getting startedENGLISHENGLISH Installing memory in your computer (Optional) This desktop PC comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets. DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 Channel Channel A Channel B Sockets DIMM_A1 & DIMM_A2 DIMM_B1 & DIMM_B2 Recommended memory configurations Follow the installation sequence below to ensure system stability and avoid possible booting up failure. DIMM_A2 DIMM_A2 DIMM_B2 DIMM_A1 DIMM_A2 DIMM_B2 DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 DIMM_A2 DIMM_A2 DIMM_B2 DIMM_A1 DIMM_A2 DIMM_B2 DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 1 x DIMM 2 x DIMM 3 x DIMM 4 x DIMM x x x x x x 23 ASUS Desktop PCENGLISHENGLISH Install DIMMs with the same capacity from the same manufacturer in the slots of the same channel. Single memory capacity Total memory capacity DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 4GB 8GB 8GB 12GB 16GB 16GB 16GB 24GB 32GB 32GB 32GB 48GB 64GB 64GB 96GB 128GB 4GB 8GB 4GB 4GB 16GB 8GB 4GB 8GB 32GB 16GB 8GB 16GB 32GB 16GB 32GB 32GB 4GB 4GB 8GB 8GB 16GB 16GB 32GB 32GB 4GB 4GB 8GB 4GB 8GB 16GB 8GB 16GB 32GB 16GB 32GB 32GB 4GB 8GB 16GB 32GB Installing memory in your computer To install memory in your computer:

Turn off your computer. Unplug all cables from your computer. Open your computer case. Locate an empty DIMM socket. Press down and outward on the DIMM ejector to unlock the DIMM socket. START RESET 1. 2. 3. 4. 5. 24 Chapter 1: Getting startedENGLISHENGLISH 6. Align the notch on the bottom edge of the DIMM with the key of the DIMM socket, and then firmly insert the DIMM into the socket until the ejector snaps back into place. START RESET A A B 7. Close your computer case. The above pictures are for reference only. The inner structure of the desktop PC may vary. 25 ASUS Desktop PCENGLISHENGLISH Installing a graphics card in your computer To install a graphics card in your computer:

1. 2. 3. 4. Turn off your computer. Unplug all cables from your computer. Open your computer case and locate PCIEX16_1 slot if you are installing the first or the primary graphics card. Align the notch on your graphics card with the key of the slot, and then insert the card into the slot. 5. The ejector will snap back into place automatically. 26 Chapter 1: Getting startedENGLISHENGLISH 6. Use a screw driver and a screw to lock the graphics card on the chassis. 7.

(Optional) Connect a proper power supply plug to the graphics card. 27 ASUS Desktop PCENGLISHENGLISH Setting up your computer This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer. Connecting an external monitor Using the ASUS Graphics Card (on selected models only) Connect your monitor to the display output port on the discrete ASUS Graphics Card. To connect an external monitor using the ASUS Graphics Card:

1. 2. Connect a monitor to a display output port on the ASUS Graphics Card. Plug the monitor to a power source. The display output ports on the ASUS Graphics Card may vary with different models. 28 Chapter 1: Getting startedENGLISHENGLISH Using the onboard display output ports Connect your monitor to the onboard display output port. To connect an external monitor using the onboard display output ports:

1. 2. Connect a monitor to a display output port on the rear panel of your computer. Plug the monitor to a power source. If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary display device in the BIOS. Hence, connect your monitor to a display output port on the graphics card. To connect multiple external monitors to your computer, refer to the section Connecting multiple external displays for details. 29 ASUS Desktop PCENGLISHENGLISH Connecting a USB keyboard and a USB mouse Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.

Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source. For safety purposes, ONLY connect the power cord to a grounded electrical outlet. 30 Chapter 1: Getting startedENGLISHENGLISH Turning your computer ON This section describes how to turn on your computer after setting up your computer. Turning your computer ON To turn your computer ON:

1. 2. Turn your monitor ON. Press the power button on your computer. Power button 3. Wait until the operating system loads automatically. 31 ASUS Desktop PCENGLISHENGLISH 32 Chapter 1: Getting startedENGLISHENGLISH Chapter 2 Connecting devices to your computer Connecting a USB storage device This desktop PC provides USB 3.2 gen2x2, USB 3.2 gen2, USB 3.2 gen1 and USB 2.0 ports on the top and rear panels. The USB ports allow you to connect USB devices such as storage devices. To connect a USB storage device:

Insert the USB storage device to your computer. Top panel Rear panel 33 ASUS Desktop PCENGLISHENGLISH Connecting microphone and speakers This desktop PC comes with microphone ports and speaker ports on both the top and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 5.1-channel, and 7.1-channel stereo speakers. Connecting Headphone and Mic Connecting headset and microphone Connecting 2-channel Speakers 34 Chapter 2: Connecting devices to your computerENGLISHENGLISH Connecting 4-channel Speakers Connecting 5.1-channel Speakers Connecting 7.1-channel Speakers 35 ASUS Desktop PCENGLISHENGLISH Connecting multiple external displays Your desktop PC may come with DisplayPort, VGA, HDMI, or DVI ports and allows you to connect multiple external displays. Setting up multiple displays When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop. To set up multiple displays:

Turn off your computer. Connect the two monitors to your computer and connect the power cords to the monitors. Refer to Setting up your computer section in Chapter 1 for details on how to connect a monitor to your computer. Turn on your computer. From the Start menu, click Settings > System > Display. Configure the settings for your displays. For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows. 1. 2. 3. 4. 5. 36 Chapter 2: Connecting devices to your computerENGLISHENGLISH Connecting an HDTV Connect a High Definition TV (HDTV) to the HDMI port of your computer. You need an HDMI cable to connect the HDTV and the computer. The HDMI cable is purchased separately. To get the best display performance, ensure that your HDMI cable is less than 15 meters. 37 ASUS Desktop PCENGLISHENGLISH 38 Chapter 2: Connecting devices to your computerENGLISHENGLISH Chapter 3 Using your computer Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC. Eye level to the top of the monitor screen Foot rest 90 angles To maintain the proper posture:

Position your computer chair to make sure that your elbows are at or slightly above the keyboard to get a comfortable typing position. Adjust the height of your chair to make sure that your knees are slightly higher than your hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your knees. Adjust the back of your chair so that the base of your spine is firmly supported and angled slightly backward. Sit upright with your knees, elbows and hips at an approximately 90 angle when you are at the PC. Place the monitor directly in front of you, and turn the top of the monitor screen even with your eye level so that your eyes look slightly downward. Keep the mouse close to the keyboard, and if necessary, use a wrist rest for support to reduce the pressure on your wrists while typing. Use your Desktop PC in a comfortably-lit area, and keep it away from sources of glare such as windows and straight sunlight. Take regular mini-breaks from using your Desktop PC. 39 ASUS Desktop PCENGLISHENGLISH 40 Chapter 3: Using your computerENGLISHENGLISH Chapter 4 Connecting to the Internet Wired connection Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN). Connecting via a DSL/cable modem To connect via a DSL/cable modem:

1. Set up your DSL/cable modem. Refer to the documentation that came with your DSL/cable modem. 2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem. Modem LINE LAN RESET PWR RJ-45 cable 3. 4. Turn on the DSL/cable modem and your computer. Configure the necessary Internet connection settings. Contact your network administrator for details or assistance in setting up your Internet connection. For more details, refer to the sections Configuring a dynamic IP/PPPoE network connection or Configuring a static IP network connection. 41 ASUS Desktop PCENGLISHENGLISH Connecting via a local area network (LAN) To connect via a LAN:

1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN. RJ-45 cable LAN 2. 3. Turn on your computer. Configure the necessary Internet connection settings. Contact your network administrator for details or assistance in setting up your Internet connection. For more details, refer to the sections Configuring a dynamic IP/PPPoE network connection or Configuring a static IP network connection. 42 Chapter 4: Connecting to the InternetENGLISHENGLISH Configuring a dynamic IP/PPPoE network connection To configure a dynamic IP/PPPoE network connection:

1. Launch Network and Sharing Center in either of these two ways:

a) b) From the taskbar, right-click

, then click Open Network and Sharing Center. From the Start menu, click Settings > Network & Internet > Ethernet > Network and Sharing Center. From the Open Network and Sharing Center screen, click Change Adapter settings. Right-click on your LAN and select Properties. Click Internet Protocol Version 4 (TCP/

IPv4) and click Properties. 2. 3. 4. 5. Click Obtain an IP address automatically and click OK. Continue to the next steps if you are using PPPoE connection. 43 ASUS Desktop PCENGLISHENGLISH 6. Return to the Network and Sharing Center and then click Set up a new connection or network. 7. Select Connect to the Internet and click Next. 8. 9. Select Broadband (PPPoE) and click Next. Follow the next onscreen instructions to complete the setup. Configuring a static IP network connection To configure a static IP network connection:

1. 2 3. 4. 5. Repeat steps 1 to 4 of the previous section. Click Use the following IP address. Enter the IP address, Subnet mask and Gateway from your service provider. If needed, enter the preferred DNS Server address and alternative address. When done, click OK. 44 Chapter 4: Connecting to the InternetENGLISHENGLISH Chapter 5 Troubleshooting Troubleshooting This chapter presents some problems you might encounter and the possible solutions.

? My computer cannot be powered on and the power LED on the front panel does not light up. Check if your computer is properly connected. Check if the wall outlet is functioning. Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON in Chapter 1.

? My computer hangs. Do the following to close the programs that are not responding:

1. Simultaneously press <Alt> + <Ctrl> + <Delete> keys on the keyboard, then click Task Manager. 2. Select the program that is not responding, then click End Task. If the keyboard is not responding, press and hold the Power button on your chassis until the computer shuts down. Then press the Power button to turn it on.

I cannot connect to a wireless network using the ASUS WLAN Card (on selected models only)?

Ensure that you enter the correct network security key for the wireless network you want to connect to. Connect the external antennas (optional) to the antenna connectors on the ASUS WLAN Card and place the antennas on the top of your computer chassis for the best wireless performance. I cannot insert the M.2 Wi-Fi card / M.2 SSD module into the M.2 slot. Ensure that you follow the printing on the motherboard and insert the M.2 Wi-Fi card / M.2 SSD module into the proper M.2 slot. 45 ASUS Desktop PCENGLISHENGLISH

The arrow keys on the number key pad are not working. Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad.

? No display on the monitor. Check if the monitor is powered on. Ensure that your monitor is properly connected to the video output port on your computer. If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card. Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable. Check if your monitor is plugged to a power source properly. Refer to the documentation that came with your monitor for more troubleshooting information.

? When using multiple monitors, only one monitor has display. Ensure that the both monitors are powered on. During POST, only the monitor connected to the VGA port has display. The dual display function works only under Windows. When a graphics card is installed on your computer, ensure that you connect the monitors to the output port on the graphics card. Check if the multiple displays settings are correct.

? My computer cannot detect my USB storage device. The first time you connect your USB storage device to your computer, Windows automatically installs a driver for it. Wait for a while and go to My Computer to check if the USB storage device is detected. Connect your USB storage device to another computer to test if the USB storage device is broken or malfunctions. 46 Chapter 5: TroubleshootingENGLISHENGLISH

I want to restore or undo changes to my computers system settings without affecting my personal files or data. You can use Windows 11 Refresh your PC without affecting your files recovery option to restore or undo changes to your computers system settings without affecting your personal data such as documents or photos. To use this recovery option, click Settings > Update & recovery > Recovery from the Start menu, select Refresh your PC without affecting your files, and click Get started. The picture on the HDTV is distorted. It is caused by the different resolutions of your monitor and your HDTV. Adjust the screen resolution to fit your HDTV. To change the screen resolution:

From the Start menu, click Settings > System > Display.

? My speakers produce no sound. Ensure that you connect your speakers to the Line out port (lime) on the front panel or the rear panel. Check if your speak is connected to an electrical source and turned on. Adjust your speakers volume. Ensure that your computers system sounds are not Muted. If it is muted, the volume icon is displayed as sounds, click from the Windows notification area, then click

. To enable the system

. If it is not muted, click and drag the slider to adjust the volume. Connect your speakers to another computer to test if the speakers are working properly. 47 ASUS Desktop PCENGLISHENGLISH Power Problem Possible Cause Action No power

(The power indicator is off) Incorrect power voltage Set your computers power voltage switch to your areas power requirements. Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet. Your computer is not turned on. Press the power key on the front panel to ensure that your computer is turned on. Your computers power cord is not properly connected. Ensure that the power cord is properly connected. Use other compatible power cord. PSU (Power supply unit) problems Contact the ASUS Service Center about installing another PSU on your computer. Display Problem Possible Cause Action The signal cable is not connected to the correct VGA port on your computer. No display output after turning the computer on

(Black screen) Connect the signal cable to the correct display port (onboard VGA or discrete VGA port). If you are using a discrete VGA card, connect the signal cable to the discrete VGA port. Signal cable problems Try connecting to another monitor. 48 Chapter 5: TroubleshootingENGLISHENGLISH LAN Problem Possible Cause The LAN cable is not connected. Action Connect the LAN cable to your computer. LAN cable problems Cannot access the Internet Your computer is not properly connected to a router or hub. Network settings Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center. Ensure that your computer is properly connected to a router or hub. Contact your Internet Service Provider

(ISP) for the correct LAN settings. Problems caused by the anti-

virus software Close the anti-virus software. Driver problems Reinstall the LAN driver Audio Problem Possible Cause Action Speaker or headphone is connected to the wrong port. Refer to your computers User Guide for the correct port. Disconnect and reconnect the speaker to your computer. No Audio Speaker or headphone does not work. Try using another speaker or headphone. The front and back audio ports do not work. Try both the front and back audio ports. If one port failed, check if the port is set to multi-channel. Driver problems Reinstall the audio driver 49 ASUS Desktop PCENGLISHENGLISH System Problem Possible Cause Too many programs are running. Action Close some of the programs. System speed is too slow Computer virus attack Hard disk drive failure The system often hangs or freezes. Memory module problems Use an anti-virus software to scan for viruses and repair your computer. Reinstall the operating system. Send the damaged hard disk drive to ASUS Service Center for servicing. Replace with a new hard disk drive. Replace with compatible memory modules. Remove the extra memory modules that you have installed, then try again. Contact the ASUS Service Center for assistance. There is not enough air ventilation for your computer. Move your computer to an area with better air flow. Incompatible softwares are installed. Reinstall the OS and reinstall compatible softwares. The system does not boot up An expansion card other than a graphics card and a storage device is installed in PCIEX16_1. Install this expansion card into any other PCIe slot and reboot the system. 50 Chapter 5: TroubleshootingENGLISHENGLISH CPU Problem Possible Cause Action Your computer is booting up. Too noisy right after turning on the computer. The BIOS settings have been changed. Old BIOS version It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS. Restore the BIOS to its default settings. Update the BIOS to the latest version. Visit the ASUS Support site at https://

www.asus.com/support to download the latest BIOS versions. Computer is too noisy when in use. The CPU fan has been replaced. Ensure that you are using a compatible or ASUS-recommended CPU fan. There is not enough air ventilation for the computer. Ensure that your computer is working in an area with good air flow. Update the BIOS. If you know how to reinstall the The system temperature is too high. motherboard, try to clean the inner space of the chassis. Contact the ASUS Service Center for assistance. If the problem still persists, refer to your Desktop PCs warranty card and contact the ASUS Service Center. Visit the ASUS Support site at https://www.asus.com/support for the service center information. 51 ASUS Desktop PCENGLISHENGLISH 52 Chapter 5: TroubleshootingENGLISHENGLISH Appendix Working with Windows Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring your Windows operating system. Follow the onscreen instructions to configure the following basic items:

Personalize Get online Settings Your account After configuring the basic items, Windows proceeds to install your apps and preferred settings. Ensure that your computer is kept powered on during the setup process. Once the setup process is complete, the Desktop appears. The screenshots in this chapter are for reference only. Start menu The Start menu is the main gateway to your computers programs, Windows apps, folders, and settings. You can use the Start menu to do these common activities:

Start programs or Windows apps Open commonly used programs or Windows apps Adjust computer settings Get help with the Windows operating system Turn off your computer Log off from Windows or switch to a different user account Launching the Start menu You can launch the Start menu in two ways:

Position your mouse pointer over the Start icon on your desktop then click it. Press the Windows logo key on your keyboard. 53 ASUS Desktop PCENGLISHENGLISH Opening programs from the Start menu One of the most common uses of the Start menu is opening programs installed on your Computer. You can open programs in two ways:

Position your mouse pointer over the program then click to launch it. Use the arrow keys to browse through the programs. Press Windows apps to launch it. Some Windows apps require signing in to your Microsoft account before they are fully launched. Launching Windows apps from the Start menu You can launch Windows apps in two ways:

Position your mouse pointer over the app then click to launch it. Use the arrow keys to browse through the apps. Press to launch an app. Connecting to wireless networks Wi-Fi Access emails, surf the Internet, and share applications via social networking sites using your computers Wi-Fi connection. Connecting Wi-Fi Connect your computer to a Wi-Fi network by using the following steps:

1. 2. 3. Click/Tap the Wi-Fi icon from the taskbar to enable Wi-Fi. Select an access point from the list of available Wi-Fi connections. Select Connect to start the network connection. You may be prompted to enter a security key to activate the Wi-Fi connection. Bluetooth Use Bluetooth to facilitate wireless data transfers with other Bluetooth-enabled devices. Pairing with other Bluetooth-enabled devices You need to pair your computer with other Bluetooth-enabled devices to enable data transfers. Connect your devices by using the following steps:

Launch Settings from the Start menu. Select Devices > Bluetooth to search for Bluetooth-enabled devices. (for Windows 10) Select Bluetooth & devices > Add device to search for Bluetooth-enabled devices.

(for Windows 11) 1. 2. 54 Appendix: Working with Windows ENGLISHENGLISH 3. Select a device from the list to pair your computer with the device. For some Bluetooth-enabled devices, you may be prompted to key in the passcode of your computer. Connecting to wired networks You can also connect to wired networks, such as local area networks and broadband Internet connection, using your computers LAN port. Contact your Internet Service Provider (ISP) for details or your network administrator for assistance in setting up your Internet connection. Turning your computer off You can turn off your computer by doing either of the following procedures:

Launch the Start menu, select the power icon then select Shut down to do a normal shutdown. From the log-in screen, select the power icon then select Shut down. Press down list then select OK. to launch Shut Down Windows. Select Shut down from the drop-

If your computer is unresponsive, press and hold the power button for at least four (4) seconds until your computer turns off. Putting your computer to sleep You can put your computer to Sleep mode in two ways:

Launch the Start menu, select the power icon then select Sleep to put your computer to sleep. From the log-in screen, select the power icon then select Sleep. Press then select OK. to launch Shut Down Windows. Select Sleep from the drop-down list You can also put your computer to Sleep mode by pressing the power button once. 55 ASUS Desktop PCENGLISHENGLISH

50#PET PP m m 2

. 0 8 4 5.5 mm 57.50.2mm Model Name: G35CG Desktop PC Made in China Input: 115Vac/230Vac, 9A/4.5A, 50/60Hz CAN ICES-003(B)/NMB-003(B) ASUSTek Computer Inc. All rights reserved. ASUSTek COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN, GERMANY 2 1 0 6 6 8 - 1 1 FCC ID: MSQ-G35CG IC: 3568A-G35CG 15105-06989200 Logo 10mm 4.5 mm 8 mm

57.5mm 003-220254 CONTAINS:AX210NGW FCC ID: PD9AX210NG IC: 1000M-AX210NG R-C-INT-AX210NGW 5.2/5.3/6GHz(5.2GHz

) CCAH20LP8460T3 D220163003 15100-2230L200 0.5 RX4 m m 6 7

. 9 1 003-220254 CONTAINS:AX210NGW FCC ID: PD9AX210NG IC: 1000M-AX210NG R-C-INT-AX210NGW 5.2/5.3/6GHz(5.2GHz

) CCAH20LP8460T3 D220163003 15100-2230L200 003-220254 CONTAINS:AX210NGW FCC ID: PD9AX210NG IC: 1000M-AX210NG R-C-INT-AX210NGW 5.2/5.3/6GHz(5.2GHz

) CCAH20LP8460T3 D220163003 15100-2230L200 003-220254 CONTAINS:AX210NGW FCC ID: PD9AX210NG IC: 1000M-AX210NG R-C-INT-AX210NGW 5.2/5.3/6GHz(5.2GHz

) CCAH20LP8460T3 D220163003 15100-2230L200 1 5 1 0 0

2 2 3 0 L 2 0 0 1 5 1 0 0

2 2 3 0 L 2 0 0 1 5 1 0 0

2 2 3 0 L 2 0 0 3A 15100-2230L200 25#PET+P 57.5mmx19.76Cmm(+/-0.2) 0.5RX4 V0

ASUSTeK Computer Inc. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Covered Equipment Certification Attestation Letter DATE: 03/13/2023 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: MSQ-G35CG Host Model Name:G35CG Statement for 47 CFR section 2.911(d)(5)(i) ASUSTeK Computer Inc. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Statement for 47 CFR section 2.911(d)(5)(ii) ASUSTeK Computer Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Company name: ASUSTeK Computer Inc. Position in the Company: Associate Vice President Printed name: Jackson Yen Email: jackson_yen@asus.com TEL: +886-2-28943447 FAX: +886-2-28987364 ___________________________ Signatory

ASUSTeK Computer Inc. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Designation of U.S. Agent for Service of Process Certification Attestation Letter DATE: 03/13/2023 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID:MSQ-G35CG Host Model Name:G35CG ATTENTION: FCC Certification Section 2.911(d)(7) Information ASUSTeK Computer Inc. as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicants agent for service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed:

Designated U.S. Agent Signed:

Signed:_________________________ Signed:__________________________ Printed name: Jackson Yen Title: Associate Vice President Printed name: Steve Chang Title: President Company Name: ASUSTeK Computer Inc. Company Name: ASUS Computer International Email: jackson_yen@asus.com FRN: 0033432428 TEL: +886-2-28943447 Email: steve_chang@asus.com FAX: +886-2-28987364 TEL: 510-6084530 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City FAX: 510-6084555 112, Taiwan Address: 48720 Kato Road, Fremont, CA 94538

FCC ID.: MSQ-G35CG Date: March 13, 2023 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely,

Jackson Yen / Associate Vice President ASUSTeK Computer Inc

Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

ASUSTeK Computer Inc. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Taipei Taiwan Name Representative of agent: Coco Pong Agent Company name:

Address:

City:

Country DEKRA Testing and Certification Co., Ltd. No. 85, Wenlin St., Linkou Dist., New Taipei City 24457 Taiwan, R.O.C. is authorized to apply for Certification of the following product(s):

Product description: Desktop PC FCC ID: MSQ-G35CG IC: 3568A-G35CG Trademark: ASUS on our behalf. Date:

City:

2023/03/13 Taipei Name:

Jackson Yen Function:

Associate Vice President Signature:

Notes:

(1) : Required for FCC application

(2) : For FCC it must be the Grantee Code owner or the authorized agent.