|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2024-10-11
|
|
1 2 3 4
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0005821988
|
|
1 2 3 4
|
Physical Address |
1F, No. 15, Lide Rd.
|
|
1 2 3 4
|
Beitou, Taipei, N/A 112
|
|
1 2 3 4
|
Beitou, Taipei, N/A
|
|
1 2 3 4
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
MSQ
|
|
1 2 3 4
|
Equipment Product Code |
BE201NG
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
J******** Y******
|
|
1 2 3 4
|
Title |
Associate Vice President
|
|
1 2 3 4
|
Telephone Number |
+886-********
|
|
1 2 3 4
|
Fax Number |
+886-********
|
|
1 2 3 4
|
E-mail |
j******@asus.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
|
1 2 3 4
|
Name |
F******** H******
|
|
1 2 3 4
|
Physical Address |
No. 85, Wenlin St, Linkou Dist.
|
|
1 2 3 4
|
New Taipei City
|
|
1 2 3 4
|
Taiwan
|
|
1 2 3 4
|
Telephone Number |
886-2********
|
|
1 2 3 4
|
E-mail |
f******@dekra.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | 6CD - 15E 6 GHz Low Power Dual Client |
| 1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel BE200 |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: PD9BE201NG Grant Date: 05/06/2024 |
| 1 2 3 4 | Change in Identification |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | This C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band.
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
For 49mm SKU: The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 49mm minimum test separation distance.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| 1 2 3 4 | This C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band.
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
For 49mm SKU: The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 49mm minimum test separation distance.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| 1 2 3 4 | This C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
For 49mm SKU: The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 49mm minimum test separation distance.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| 1 2 3 4 | This C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
For 49mm SKU: The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 49mm minimum test separation distance.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
Intel Corporation S.A.S.
|
|
1 2 3 4
|
Name |
N**** A******
|
|
1 2 3 4
|
Telephone Number |
00334********
|
|
1 2 3 4
|
E-mail |
n******@intel.com
|
|