FCC ID: MSQAX200NG Intel Wi-Fi 6 AX200 (BT/WiFi)

by: ASUSTeK Computer Inc latest update: 2021-08-02 model: AX200NG

Twenty Five grants have been issued under this FCC ID from 04/19/2019 to 08/02/2021 (this is one of two hundred and eleven releases in 2021 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked drivers, warrantee terms, instructions, troubleshooting guides, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various AX200NGW- UserMan Users Manual pdf 1.12 MiB June 08 2020 / December 05 2020 delayed release
various AX200NGW- UserMan-Part 1-0715 Users Manual pdf 4.74 MiB July 16 2019
various AX200NGW- UserMan-Part 2-0715 Users Manual pdf 934.04 KiB July 16 2019
various AX200NGW- UserMan 20190717 Users Manual pdf 3.44 MiB
various Users Manual pdf June 10 2019 / December 09 2019
various User Manual Users Manual pdf 1.21 MiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- Inpho SAR Internal Photos pdf 4.97 MiB June 08 2020 / December 05 2020 delayed release
various Internal Photos Internal Photos pdf 4.15 MiB July 28 2021 / October 22 2021 delayed release
various Internal Photos pdf June 10 2019 / December 09 2019
various AX200NGW- Expho External Photos pdf 220.68 KiB December 30 2020
various AX200NGW- Expho SAR External Photos pdf 741.50 KiB June 08 2020 / December 05 2020 delayed release
various External Photos External Photos pdf 1.06 MiB July 28 2021 / October 22 2021 delayed release
various External Photos pdf June 10 2019 / December 09 2019
various AX200NGW- ISED Label 20200605 ID Label/Location Info pdf 134.91 KiB June 08 2020
various Label Sample RN5401Q ID Label/Location Info pdf 1.08 MiB July 28 2021 / August 02 2021
various Label Sample RN5401U ID Label/Location Info pdf 1.07 MiB July 28 2021 / August 02 2021
various Label Sample UN5401Q ID Label/Location Info pdf 1.10 MiB July 28 2021 / August 02 2021
various Label Sample UN5401U ID Label/Location Info pdf 1.10 MiB July 28 2021 / August 02 2021
various Confidentiality Request (Short term) Cover Letter(s) pdf 201.55 KiB July 28 2021 / August 02 2021
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 210.75 KiB July 28 2021 / August 02 2021
various Cover Letter (Description of Change) Cover Letter(s) pdf 43.55 KiB July 28 2021 / August 02 2021
various RF Exposure Info (SAR) RF Exposure Info pdf 4.00 MiB July 28 2021 / August 02 2021
various Test Set Up Photos (SAR) Test Setup Photos pdf 794.65 KiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- ASUS Authorization letter AX200NGW 17-Nov-2020 Cover Letter(s) pdf 96.32 KiB December 30 2020
various AX200NGW- ATTESTATION-OK Cover Letter(s) pdf 100.63 KiB December 30 2020
various AX200NGW- Class II Change-OK Cover Letter(s) pdf 92.38 KiB December 30 2020
various AX200NGW- Confidentiality Request-OK Cover Letter(s) pdf 124.45 KiB December 30 2020
various AX200NGW- Declaration of authorization-OK Cover Letter(s) pdf 100.66 KiB December 30 2020
various AX200NGW- SAR Report RF Exposure Info pdf 3.27 MiB December 30 2020
various AX200NGW- SAR Setup Test Setup Photos pdf 414.44 KiB December 30 2020
various AX200NGW- UNII Declaration letter FCC-OK Cover Letter(s) pdf 221.93 KiB December 30 2020
various Confidential AX200NGW- OPDS Operational Description pdf December 30 2020 confidential
various AX200NGW- ATTESTATION 20200605 Cover Letter(s) pdf 90.65 KiB June 08 2020
various AX200NGW- Class II Change 20200605 Cover Letter(s) pdf 82.97 KiB June 08 2020
various AX200NGW- Confidentiality Request 20200605 Cover Letter(s) pdf 213.80 KiB June 08 2020
various AX200NGW- Declaration of authorization 20200605 Cover Letter(s) pdf 90.68 KiB June 08 2020
various AX200NGW- ISED Tsup-SAR Test Setup Photos pdf 165.68 KiB June 08 2020 / December 05 2020 delayed release
various AX200NGW- TestRpt SAR RF Exposure Info pdf 4.34 MiB June 08 2020
various AX200NGW- UNII Declaration letter FCC 20200605 Cover Letter(s) pdf 211.97 KiB June 08 2020
various Confidential AX200NGW- BlkDia Block Diagram pdf June 08 2020 confidential
various Confidential AX200NGW- OPDes Operational Description pdf June 08 2020 confidential
various Confidential AX200NGW- Schem Schematics pdf June 08 2020 confidential
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Confidential AX200NGW- BlkDia 20190717 Block Diagram pdf July 17 2019 confidential
various Confidential AX200NGW- Schem Part1 Schematics pdf July 17 2019 confidential
various Confidential AX200NGW- Schem Part2 Schematics pdf July 17 2019 confidential
various Internal Photos pdf
various TempConfidential AX200NGW- Inpho SAR-Part 1 Internal Photos pdf 4.35 MiB July 16 2019 / January 12 2020 delayed release
various TempConfidential AX200NGW- Inpho SAR-Part 2 Internal Photos pdf 4.42 MiB July 16 2019 / January 12 2020 delayed release
various Cover Letter(s) pdf 28.54 KiB July 16 2019
various Cover Letter(s) pdf February 07 2019
various Cover Letter(s) pdf February 07 2019
various Cover Letter(s) pdf February 07 2019
various ID Label/Location Info pdf February 07 2019
various ID Label/Location Info pdf February 07 2019
various Cover Letter(s) pdf February 07 2019
various RF Exposure Info pdf February 07 2019
various Test Setup Photos pdf February 07 2019
various Test Report pdf October 06 2019 / December 06 2019
various RF Exposure Info pdf June 10 2019 / June 12 2019
various RF Exposure Info pdf December 06 2019
various Confidential Operational Description AX200NGW 19-0272 Operational Description pdf June 10 2019 confidential
various Confidential X432F Block deagram Block Diagram pdf June 10 2019 confidential
various Confidential x432fa whl mb r20 190401 Schematics pdf June 10 2019 confidential
various ID Label/Location Info pdf October 06 2019 / December 06 2019
various Cover Letter(s) pdf October 06 2019 / December 06 2019
various Cover Letter(s) pdf October 06 2019 / December 06 2019
various Cover Letter(s) pdf October 06 2019 / December 06 2019
various Cover Letter(s) pdf October 06 2019 / December 06 2019
various ID Label/Location Info pdf October 06 2019 / December 06 2019
various Software Security Description-19-0272 20190606 Operational Description pdf June 10 2019 confidential
various Test Setup Photos pdf June 10 2019 / December 09 2019
various Test Setup Photos pdf June 10 2019 / December 09 2019
various ID Label/Location Info pdf October 06 2019 / December 06 2019
various Test Report pdf October 06 2019 / December 06 2019
various Test Report pdf October 06 2019 / December 06 2019
various Test Setup Photos pdf June 10 2019 / December 09 2019
various Cover Letter(s) pdf November 04 2019
various Cover Letter(s) pdf November 04 2019
various ID Label/Location Info pdf November 04 2019
various ID Label/Location Info pdf November 04 2019
various AX200NGW- UserMan Users Manual pdf 1.12 MiB June 08 2020 / December 05 2020 delayed release
various AX200NGW- UserMan-Part 1-0715 Users Manual pdf 4.74 MiB July 16 2019
various AX200NGW- UserMan-Part 2-0715 Users Manual pdf 934.04 KiB July 16 2019
various AX200NGW- UserMan 20190717 Users Manual pdf 3.44 MiB
various User Manual Users Manual pdf 1.21 MiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- Inpho SAR Internal Photos pdf 4.97 MiB June 08 2020 / December 05 2020 delayed release
various Internal Photos Internal Photos pdf 4.15 MiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- Expho External Photos pdf 220.68 KiB December 30 2020
various AX200NGW- Expho SAR External Photos pdf 741.50 KiB June 08 2020 / December 05 2020 delayed release
various External Photos External Photos pdf 1.06 MiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- ISED Label 20200605 ID Label/Location Info pdf 134.91 KiB June 08 2020
various Label Sample RN5401Q ID Label/Location Info pdf 1.08 MiB July 28 2021 / August 02 2021
various Label Sample RN5401U ID Label/Location Info pdf 1.07 MiB July 28 2021 / August 02 2021
various Label Sample UN5401Q ID Label/Location Info pdf 1.10 MiB July 28 2021 / August 02 2021
various Label Sample UN5401U ID Label/Location Info pdf 1.10 MiB July 28 2021 / August 02 2021
various Confidentiality Request (Short term) Cover Letter(s) pdf 201.55 KiB July 28 2021 / August 02 2021
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 210.75 KiB July 28 2021 / August 02 2021
various Cover Letter (Description of Change) Cover Letter(s) pdf 43.55 KiB July 28 2021 / August 02 2021
various RF Exposure Info (SAR) RF Exposure Info pdf 4.00 MiB July 28 2021 / August 02 2021
various Test Set Up Photos (SAR) Test Setup Photos pdf 794.65 KiB July 28 2021 / October 22 2021 delayed release
various AX200NGW- ASUS Authorization letter AX200NGW 17-Nov-2020 Cover Letter(s) pdf 96.32 KiB December 30 2020
various AX200NGW- ATTESTATION-OK Cover Letter(s) pdf 100.63 KiB December 30 2020
various AX200NGW- Class II Change-OK Cover Letter(s) pdf 92.38 KiB December 30 2020
various AX200NGW- Confidentiality Request-OK Cover Letter(s) pdf 124.45 KiB December 30 2020
various AX200NGW- Declaration of authorization-OK Cover Letter(s) pdf 100.66 KiB December 30 2020
various AX200NGW- SAR Report RF Exposure Info pdf 3.27 MiB December 30 2020
various AX200NGW- SAR Setup Test Setup Photos pdf 414.44 KiB December 30 2020
various AX200NGW- UNII Declaration letter FCC-OK Cover Letter(s) pdf 221.93 KiB December 30 2020
various AX200NGW- ATTESTATION 20200605 Cover Letter(s) pdf 90.65 KiB June 08 2020
various AX200NGW- Class II Change 20200605 Cover Letter(s) pdf 82.97 KiB June 08 2020
various AX200NGW- Confidentiality Request 20200605 Cover Letter(s) pdf 213.80 KiB June 08 2020
various AX200NGW- Declaration of authorization 20200605 Cover Letter(s) pdf 90.68 KiB June 08 2020
various AX200NGW- ISED Tsup-SAR Test Setup Photos pdf 165.68 KiB June 08 2020 / December 05 2020 delayed release
various AX200NGW- TestRpt SAR RF Exposure Info pdf 4.34 MiB June 08 2020
various AX200NGW- UNII Declaration letter FCC 20200605 Cover Letter(s) pdf 211.97 KiB June 08 2020

frequency equipment class purpose
1 2021-08-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2422 ~ 2462 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2020-12-30 2422 ~ 2462 DTS - Digital Transmission System
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2020-06-08 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2422 ~ 2462 DTS - Digital Transmission System
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2019-07-18 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
11 2019-07-17 2422 ~ 2462 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2019-07-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DTS - Digital Transmission System
16 2019-07-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2422 ~ 2462 DTS - Digital Transmission System
18 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
19 2019-06-12 2422 ~ 2462 DTS - Digital Transmission System
20 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2019-04-19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
23 JBP - Part 15 Class B Computing Device Peripheral
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2412 ~ 2472 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2021-08-02
various 2020-12-30
various 2020-06-08
various 2019-07-18
various 2019-07-17
various 2019-07-16
various 2019-07-02
various 2019-06-12
various 2019-04-19
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 1F, No. 15, Lide Rd.
various 4F, No. 150, Li-Te Rd.
various Beitou, Taipei, N/A
various Peitou, Taipei, N/A 112
various Taiwan
app s TCB Information
various TCB Application Email Address b******@phoenix-testlab.de
various h******@acbcert.com
various s******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code AX200NG
app s Person at the applicant's address to receive grant or for contact
various Name J******** Y********
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various A Test Lab Techno Corp.
various DEKRA Testing and Certification Co., Ltd.
various DEKRA
various Name T****** H********
various F******** Y****
various A**** L******
various J**** L****
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 140-1, Changan Street, Bade District
various New Taipei City
various Taoyuan City
various Taiwan
various Telephone Number 886-2********
various 88632********
various Fax Number 886-2********
various 88632********
various E-mail t******@dekra.com
various f******@dekra.com
various a******@dekra.com
various j******@atl-lab.com.tw
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/22/2021
various12/05/2020
various08/31/2019
various01/12/2020
various12/30/2019
various12/09/2019
various10/17/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6 AX200 (BT/WiFi)
variousIntel WiFi 6 AX200
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device on tablet mode and to request approval for portable category specific host tablet PC, model number: UN5401U, RN5401U, UN5401Q, RN5401Q; Brand: ASUS, with antenna AWAN, model no.: AML6Y-100117 and AML6Y-100118 and INPAG, model no.: MDA-LE-02-002 and MDA-LE-01-002. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.05 W/kg and 1.337 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device on tablet mode and to request approval for portable category specific host tablet PC, model number: UN5401U, RN5401U, UN5401Q, RN5401Q; Brand: ASUS, with antenna AWAN, model no.: AML6Y-100117 and AML6Y-100118 and INPAG, model no.: MDA-LE-02-002 and MDA-LE-01-002. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body- worn and simultaneous transmission use conditions are 0.67 W/kg and 1.323 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device on tablet mode and to request approval for portable category specific host tablet PC, model number: UN5401U, RN5401U, UN5401Q, RN5401Q; Brand: ASUS, with antenna AWAN, model no. AML6Y-100118 and INPAG, model no. MDA-LE-01-002. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.23 W/kg and 1.337 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 0.51W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 0.21W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.51W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-02-647-1, WA-P-LB-01-225, WA-P-LB-01-225-1, 04072-03320000, 04072-03320100. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.49W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-02-647-1, WA-P-LB-01-225, WA-P-LB-01-225-1, 04072-03320000, 04072-03320100. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.44W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-02-647-1, WA-P-LB-01-225, WA-P-LB-01-225-1, 04072-03320000, 04072-03320100. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.49W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.34W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.58W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX581G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.13 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX581G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.08 W/kg and 1.21 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX581G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.13 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE ICT, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE ICT, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE ICT, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name A Test Lab Techno Corp.
various Intel Corporation S.A.S.
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Name M**** W******
various N******** A****
various V******** L******
various S**** H****
various J******** L****
various Telephone Number 886-3********
various 00334********
various 88628******** Extension:
various +886-******** Extension:
various Fax Number 886-3********
various 00334********
various 88628********
various +886-********
various E-mail m******@atl-lab.com.tw
various n******@intel.com
various v******@dekra.com
various s******@dekra.com
various J******@atl-lab.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.189
1 2 15E 38 CC MO 5190 5230 0.166
1 3 15E 38 CC MO 5210 5210 0.105
1 4 15E 38 CC MO 5250 5250 0.096
1 5 15E 38 CC MO ND 5260 5320 0.184
1 6 15E 38 CC MO ND 5270 5310 0.152
1 7 15E 38 CC MO ND 5290 5290 0.089
1 8 15E 38 CC MO ND 5500 5720 0.2
1 9 15E 38 CC MO ND 5710 5710 0.184
1 1 15E 38 CC MO ND 5720 5720 0.156
1 11 15E 38 CC MO ND 5530 5690 0.199
1 12 15E 38 CC MO 5745 5825 0.206
1 13 15E 38 CC MO 5755 5795 0.202
1 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.008
2 2 15C CC MO 2412 2472 0.988
2 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.008
4 2 15C CC MO 2412 2472 0.988
4 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.189
5 2 15E CC MO 5190 5230 0.166
5 3 15E CC MO 5210 5210 0.105
5 4 15E CC MO 5250 5250 0.096
5 5 15E CC MO ND 5260 5320 0.184
5 6 15E CC MO ND 5270 5310 0.152
5 7 15E CC MO ND 5290 5290 0.089
5 8 15E CC MO ND 5500 5700 0.2
5 9 15E CC MO ND 5710 5710 0.184
5 1 15E CC MO ND 5720 5720 0.156
5 11 15E CC MO ND 5530 5690 0.199
5 12 15E CC MO 5745 5825 0.206
5 13 15E CC MO 5755 5795 0.202
5 14 15E CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.189
7 2 15E CC MO 5190 5230 0.166
7 3 15E CC MO 5210 5210 0.105
7 4 15E CC MO 5250 5250 0.096
7 5 15E CC MO ND 5260 5320 0.184
7 6 15E CC MO ND 5270 5310 0.152
7 7 15E CC MO ND 5290 5290 0.089
7 8 15E CC MO ND 5500 5700 0.2
7 9 15E CC MO ND 5710 5710 0.184
7 1 15E CC MO ND 5720 5720 0.156
7 11 15E CC MO ND 5530 5690 0.199
7 12 15E CC MO 5745 5825 0.206
7 13 15E CC MO 5755 5795 0.202
7 14 15E CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.008
8 2 15C CC MO 2412 2472 0.988
8 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.189
10 2 15E CC MO 5190 5230 0.166
10 3 15E CC MO 5210 5210 0.105
10 4 15E CC MO 5250 5250 0.096
10 5 15E CC MO ND 5260 5320 0.184
10 6 15E CC MO ND 5270 5310 0.152
10 7 15E CC MO ND 5290 5290 0.089
10 8 15E CC MO ND 5500 5700 0.2
10 9 15E CC MO ND 5710 5710 0.184
10 1 15E CC MO ND 5720 5720 0.156
10 11 15E CC MO ND 5530 5690 0.199
10 12 15E CC MO 5745 5825 0.206
10 13 15E CC MO 5755 5795 0.202
10 14 15E CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.008
11 2 15C CC MO 2412 2472 0.988
11 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.189
14 2 15E CC MO 5190 5230 0.166
14 3 15E CC MO 5210 5210 0.105
14 4 15E CC MO 5250 5250 0.096
14 5 15E CC MO ND 5260 5320 0.184
14 6 15E CC MO ND 5270 5310 0.152
14 7 15E CC MO ND 5290 5290 0.089
14 8 15E CC MO ND 5500 5700 0.2
14 9 15E CC MO ND 5710 5710 0.184
14 1 15E CC MO ND 5720 5720 0.156
14 11 15E CC MO ND 5530 5690 0.199
14 12 15E CC MO 5745 5825 0.206
14 13 15E CC MO 5755 5795 0.202
14 14 15E CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.008
15 2 15C CC MO 2412 2472 0.988
15 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.008
17 2 15C CC MO 2412 2472 0.988
17 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E 38 CC MO 5180 5240 0.189
18 2 15E 38 CC MO 5190 5230 0.166
18 3 15E 38 CC MO 5210 5210 0.105
18 4 15E 38 CC MO 5250 5250 0.096
18 5 15E 38 CC MO ND 5260 5320 0.184
18 6 15E 38 CC MO ND 5270 5310 0.152
18 7 15E 38 CC MO ND 5290 5290 0.089
18 8 15E 38 CC MO ND 5500 5700 0.2
18 9 15E 38 CC MO ND 5710 5710 0.184
18 1 15E 38 CC MO ND 5720 5720 0.156
18 11 15E 38 CC MO ND 5530 5690 0.199
18 12 15E 38 CC MO 5745 5825 0.206
18 13 15E 38 CC MO 5755 5795 0.202
18 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.008
19 2 15C CC MO 2412 2472 0.988
19 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E 38 CC MO 5180 5240 0.189
20 2 15E 38 CC MO 5190 5230 0.166
20 3 15E 38 CC MO 5210 5210 0.105
20 4 15E 38 CC MO 5250 5250 0.096
20 5 15E 38 CC MO ND 5260 5320 0.184
20 6 15E 38 CC MO ND 5270 5310 0.152
20 7 15E 38 CC MO ND 5290 5290 0.089
20 8 15E 38 CC MO ND 5500 5700 0.2
20 9 15E 38 CC MO ND 5710 5710 0.184
20 1 15E 38 CC MO ND 5720 5720 0.156
20 11 15E 38 CC MO ND 5530 5690 0.199
20 12 15E 38 CC MO 5745 5825 0.206
20 13 15E 38 CC MO 5755 5795 0.202
20 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC MO 5180 5240 0.189
22 2 15E 38 CC MO 5190 5230 0.166
22 3 15E 38 CC MO 5210 5210 0.105
22 4 15E 38 CC MO 5250 5250 0.096
22 5 15E 38 CC MO ND 5260 5320 0.184
22 6 15E 38 CC MO ND 5270 5310 0.152
22 7 15E 38 CC MO ND 5290 5290 0.089
22 8 15E 38 CC MO ND 5500 5700 0.2
22 9 15E 38 CC MO ND 5710 5710 0.184
22 1 15E 38 CC MO ND 5720 5720 0.156
22 11 15E 38 CC MO ND 5530 5690 0.199
22 12 15E 38 CC MO 5745 5825 0.206
22 13 15E 38 CC MO 5755 5795 0.202
22 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.008
25 2 15C CC MO 2412 2472 0.988
25 3 15C CC MO 2422 2462 0.777

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC