FCC ID: MSQAX201D2 Intel WiFi 6 AX201

by: ASUSTeK Computer Inc latest update: 2022-12-19 model: AX201D2

One Hundred And Four grants have been issued under this FCC ID from 03/21/2019 to 12/19/2022 (this is one of two hundred and thirty-eight releases in 2022 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, drivers, warrantee terms, instructions, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various CX1102CKA EM Users Manual pdf 3.42 MiB June 15 2022 / August 15 2022 delayed release
various CX1102CKA UM Users Manual pdf 804.41 KiB June 15 2022 / August 15 2022 delayed release
various CX1102FKA EM Users Manual pdf 3.82 MiB June 15 2022 / August 15 2022 delayed release
various CX1102FKA UM Users Manual pdf 802.46 KiB June 15 2022 / August 15 2022 delayed release
various E18605 T3300KA EM Users Manual pdf 1.79 MiB September 30 2021 / March 30 2022 delayed release
various E19193 W7600Z H7600Z EM WEB Users Manual pdf 1.66 MiB March 02 2022 / August 30 2022 delayed release
various E19194 W7600Z H7600Z UM 20pages Users Manual pdf 1.55 MiB March 02 2022 / August 30 2022 delayed release
various TempConfidential User Manual 20220310 Users Manual pdf 3.56 MiB March 18 2022 / April 08 2022 delayed release
various TempConfidential User Manual CK 20220310 Users Manual pdf 3.30 MiB March 17 2022 / April 08 2022 delayed release
various User Manual Users Manual pdf 1.41 MiB July 06 2022 / January 03 2023 delayed release
various User Manual-1 Users Manual pdf 5.75 MiB October 08 2021
various User Manual-2 Users Manual pdf 3.13 MiB October 08 2021
various Users Manual Statement Users Manual pdf 1.71 MiB April 25 2022
various Internal Photos Internal Photos pdf 1.07 MiB July 06 2022 / January 03 2023 delayed release
various Internal Photos 1 Internal Photos pdf 5.61 MiB April 25 2022
various Internal Photos 2 Internal Photos pdf 4.87 MiB April 25 2022
various TempConfidential AX201D2W- Inpho Internal Photos pdf 3.36 MiB March 17 2022 / April 08 2022 delayed release
various TempConfidential AX201D2W- Inpho SAR Internal Photos pdf 2.93 MiB March 18 2022 / April 08 2022 delayed release
various External Photos External Photos pdf 887.60 KiB July 06 2022 / January 03 2023 delayed release
various TempConfidential AX201D2W- Expho External Photos pdf 2.32 MiB March 17 2022 / April 08 2022 delayed release
various TempConfidential AX201D2W- Expho SAR External Photos pdf 627.56 KiB March 18 2022 / April 08 2022 delayed release
various AX201D2W- LABEL Marking ID Label/Location Info pdf 1.17 MiB March 18 2022 / March 21 2022
various AX201D2W- LABEL location ID Label/Location Info pdf 85.58 KiB March 18 2022 / March 21 2022
various ID Label and Location-1 ID Label/Location Info pdf 250.50 KiB October 08 2021
various ID Label and Location-2 ID Label/Location Info pdf 267.14 KiB October 08 2021
various ID Label/Location Info pdf July 06 2022 / July 12 2022
various ID Label/Location Info pdf June 15 2022 / June 24 2022
various Label Sample B2402CB ID Label/Location Info pdf 582.26 KiB April 20 2022 / April 22 2022
various Label Sample B2402FB ID Label/Location Info pdf 580.12 KiB April 20 2022 / April 22 2022
various Label Sample B2502CB ID Label/Location Info pdf 580.97 KiB April 25 2022
various Label Sample B2502FB ID Label/Location Info pdf 570.18 KiB April 25 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Test Setup Photos-SAR Test Setup Photos pdf 1.32 MiB July 06 2022 / January 03 2023 delayed release
various Cover Letter(s) pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various TestSetupPhoto SAR Test Setup Photos pdf 1.83 MiB June 15 2022 / August 15 2022 delayed release
various Confidential Operational Description Operational Description pdf April 25 2022 confidential
various Confidential Operational Description G Sensor rev Operational Description pdf April 25 2022 confidential
various Confidentiality Request Long term Cover Letter(s) pdf 194.61 KiB April 25 2022
various Cover Letter Description of Change rev 2 Cover Letter(s) pdf 128.80 KiB April 25 2022
various Declaration Letter for Several Models of End Product rev Cover Letter(s) pdf 218.82 KiB April 25 2022
various RF Exposure Info SAR NB and TB RF Exposure Info pdf 1.30 MiB April 25 2022
various RF Exposure Info SAR NB and TB Annex A to Z rev 2 RF Exposure Info pdf 4.97 MiB April 25 2022
various RF Exposure Info SAR NB mode RF Exposure Info pdf 1.25 MiB April 25 2022
various RF Exposure Info SAR NB mode Annex A to Z RF Exposure Info pdf 3.33 MiB April 25 2022
various Test Set Up Photos SAR NB and TB Test Setup Photos pdf 460.98 KiB April 25 2022
various Test Set Up Photos SAR NB mode Test Setup Photos pdf 1.62 MiB April 25 2022
various Confidential Operational Description rev Operational Description pdf April 20 2022 confidential
various Cover Letter Agent Authorization Cover Letter(s) pdf 359.22 KiB April 20 2022 / April 22 2022
various Cover Letter Description of Change rev 3 Cover Letter(s) pdf 129.08 KiB April 20 2022 / April 22 2022
various RF Exposure Info pdf April 20 2022 / April 22 2022
various RF Exposure Info SAR NB and TB Annex A to Z rev 2 RF Exposure Info pdf 4.70 MiB April 22 2022
various Confidential Operational Description G Sensor Operational Description pdf April 21 2022 confidential
various AX201D2W- Class II Change-OK Cover Letter(s) pdf 145.73 KiB March 18 2022 / March 21 2022
various Cover Letter(s) pdf March 18 2022 / March 21 2022
various AX201D2W- Declaration of authorization-OK Cover Letter(s) pdf 136.91 KiB March 18 2022 / March 21 2022
various AX201D2W- TestRpt SAR 20220223 RF Exposure Info pdf 3.87 MiB March 18 2022 / March 21 2022
various Confidential AX201D2W- Block diagram Block Diagram pdf March 18 2022 confidential
various Confidential AX201D2W- OPDs Operational Description pdf March 18 2022 confidential
various Confidential AX201D2W- Schematics Schematics pdf March 18 2022 confidential
various TempConfidential AX201D2W- Tsup SAR Test Setup Photos pdf 529.46 KiB March 18 2022 / April 08 2022 delayed release
various AX201D2W- UNII Declaration letter 202220307-OK Cover Letter(s) pdf 508.55 KiB March 18 2022 / March 21 2022
various RF Exposure Info pdf March 17 2022
various AX201D2W- SAR Tsup Test Setup Photos pdf 521.30 KiB March 17 2022 / April 08 2022 delayed release
various RF Exposure Info pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various C2PC Request Letter Cover Letter(s) pdf 77.73 KiB October 08 2021
various SAR Report-1 RF Exposure Info pdf 1.30 MiB October 08 2021
various SAR Report-10 RF Exposure Info pdf 751.26 KiB October 08 2021
various SAR Report-11 RF Exposure Info pdf 671.76 KiB October 08 2021
various SAR Report-12 RF Exposure Info pdf 747.96 KiB October 08 2021
various SAR Report-13 RF Exposure Info pdf 1.18 MiB October 08 2021
various SAR Report-2 RF Exposure Info pdf 1.36 MiB October 08 2021
various SAR Report-3 RF Exposure Info pdf 1.29 MiB October 08 2021
various SAR Report-4 RF Exposure Info pdf 5.85 MiB October 08 2021
various SAR Report-5 RF Exposure Info pdf 738.46 KiB October 08 2021
various SAR Report-6 RF Exposure Info pdf 789.93 KiB October 08 2021
various SAR Report-7 RF Exposure Info pdf 766.62 KiB October 08 2021
various SAR Report-8 RF Exposure Info pdf 789.60 KiB October 08 2021
various SAR Report-9 RF Exposure Info pdf 702.83 KiB October 08 2021
various Test Setup Photos SAR Test Setup Photos pdf 1.63 MiB October 08 2021
various 2109FS11 SAR 21-1193 RF Exposure Info pdf 3.66 MiB September 30 2021
various C2PC letter ASUS Cover Letter(s) pdf 335.42 KiB September 30 2021
various AX201D2W- Class II Change 20210909 Cover Letter(s) pdf 185.08 KiB September 11 2021 / September 13 2021
various AX201D2W- Confidentiality Request Cover Letter(s) pdf 215.03 KiB September 11 2021 / September 13 2021
various AX201D2W- Declaration of authorization Cover Letter(s) pdf 174.63 KiB September 11 2021 / September 13 2021
various CX1102CKA EM Users Manual pdf 3.42 MiB June 15 2022 / August 15 2022 delayed release
various CX1102CKA UM Users Manual pdf 804.41 KiB June 15 2022 / August 15 2022 delayed release
various CX1102FKA EM Users Manual pdf 3.82 MiB June 15 2022 / August 15 2022 delayed release
various CX1102FKA UM Users Manual pdf 802.46 KiB June 15 2022 / August 15 2022 delayed release
various E18605 T3300KA EM Users Manual pdf 1.79 MiB September 30 2021 / March 30 2022 delayed release
various E19193 W7600Z H7600Z EM WEB Users Manual pdf 1.66 MiB March 02 2022 / August 30 2022 delayed release
various E19194 W7600Z H7600Z UM 20pages Users Manual pdf 1.55 MiB March 02 2022 / August 30 2022 delayed release
various TempConfidential User Manual 20220310 Users Manual pdf 3.56 MiB March 18 2022 / April 08 2022 delayed release
various TempConfidential User Manual CK 20220310 Users Manual pdf 3.30 MiB March 17 2022 / April 08 2022 delayed release
various User Manual Users Manual pdf 1.41 MiB July 06 2022 / January 03 2023 delayed release
various User Manual-1 Users Manual pdf 5.75 MiB October 08 2021
various User Manual-2 Users Manual pdf 3.13 MiB October 08 2021
various Users Manual Statement Users Manual pdf 1.71 MiB April 25 2022
various Internal Photos Internal Photos pdf 1.07 MiB July 06 2022 / January 03 2023 delayed release
various Internal Photos 1 Internal Photos pdf 5.61 MiB April 25 2022
various Internal Photos 2 Internal Photos pdf 4.87 MiB April 25 2022
various TempConfidential AX201D2W- Inpho Internal Photos pdf 3.36 MiB March 17 2022 / April 08 2022 delayed release
various TempConfidential AX201D2W- Inpho SAR Internal Photos pdf 2.93 MiB March 18 2022 / April 08 2022 delayed release
various External Photos External Photos pdf 887.60 KiB July 06 2022 / January 03 2023 delayed release
various TempConfidential AX201D2W- Expho External Photos pdf 2.32 MiB March 17 2022 / April 08 2022 delayed release
various TempConfidential AX201D2W- Expho SAR External Photos pdf 627.56 KiB March 18 2022 / April 08 2022 delayed release
various AX201D2W- LABEL Marking ID Label/Location Info pdf 1.17 MiB March 18 2022 / March 21 2022
various AX201D2W- LABEL location ID Label/Location Info pdf 85.58 KiB March 18 2022 / March 21 2022
various ID Label and Location-1 ID Label/Location Info pdf 250.50 KiB October 08 2021
various ID Label and Location-2 ID Label/Location Info pdf 267.14 KiB October 08 2021
various ID Label/Location Info pdf July 06 2022 / July 12 2022
various ID Label/Location Info pdf June 15 2022 / June 24 2022
various Label Sample B2402CB ID Label/Location Info pdf 582.26 KiB April 20 2022 / April 22 2022
various Label Sample B2402FB ID Label/Location Info pdf 580.12 KiB April 20 2022 / April 22 2022
various Label Sample B2502CB ID Label/Location Info pdf 580.97 KiB April 25 2022
various Label Sample B2502FB ID Label/Location Info pdf 570.18 KiB April 25 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various RF Exposure Info pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Cover Letter(s) pdf July 06 2022 / July 12 2022
various Test Setup Photos-SAR Test Setup Photos pdf 1.32 MiB July 06 2022 / January 03 2023 delayed release
various Cover Letter(s) pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various RF Exposure Info pdf June 15 2022 / June 24 2022
various TestSetupPhoto SAR Test Setup Photos pdf 1.83 MiB June 15 2022 / August 15 2022 delayed release
various Confidentiality Request Long term Cover Letter(s) pdf 194.61 KiB April 25 2022
various Cover Letter Description of Change rev 2 Cover Letter(s) pdf 128.80 KiB April 25 2022
various Declaration Letter for Several Models of End Product rev Cover Letter(s) pdf 218.82 KiB April 25 2022
various RF Exposure Info SAR NB and TB RF Exposure Info pdf 1.30 MiB April 25 2022
various RF Exposure Info SAR NB and TB Annex A to Z rev 2 RF Exposure Info pdf 4.97 MiB April 25 2022
various RF Exposure Info SAR NB mode RF Exposure Info pdf 1.25 MiB April 25 2022
various RF Exposure Info SAR NB mode Annex A to Z RF Exposure Info pdf 3.33 MiB April 25 2022
various Test Set Up Photos SAR NB and TB Test Setup Photos pdf 460.98 KiB April 25 2022
various Test Set Up Photos SAR NB mode Test Setup Photos pdf 1.62 MiB April 25 2022
various Cover Letter Agent Authorization Cover Letter(s) pdf 359.22 KiB April 20 2022 / April 22 2022
various Cover Letter Description of Change rev 3 Cover Letter(s) pdf 129.08 KiB April 20 2022 / April 22 2022
various RF Exposure Info SAR NB and TB Annex A to Z rev 2 RF Exposure Info pdf 4.70 MiB April 22 2022
various AX201D2W- Class II Change-OK Cover Letter(s) pdf 145.73 KiB March 18 2022 / March 21 2022
various Cover Letter(s) pdf March 18 2022 / March 21 2022
various AX201D2W- Declaration of authorization-OK Cover Letter(s) pdf 136.91 KiB March 18 2022 / March 21 2022
various AX201D2W- TestRpt SAR 20220223 RF Exposure Info pdf 3.87 MiB March 18 2022 / March 21 2022
various TempConfidential AX201D2W- Tsup SAR Test Setup Photos pdf 529.46 KiB March 18 2022 / April 08 2022 delayed release
various AX201D2W- UNII Declaration letter 202220307-OK Cover Letter(s) pdf 508.55 KiB March 18 2022 / March 21 2022
various RF Exposure Info pdf March 17 2022
various AX201D2W- SAR Tsup Test Setup Photos pdf 521.30 KiB March 17 2022 / April 08 2022 delayed release
various RF Exposure Info pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various Cover Letter(s) pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various RF Exposure Info pdf March 02 2022 / March 04 2022
various C2PC Request Letter Cover Letter(s) pdf 77.73 KiB October 08 2021
various SAR Report-1 RF Exposure Info pdf 1.30 MiB October 08 2021
various SAR Report-10 RF Exposure Info pdf 751.26 KiB October 08 2021
various SAR Report-11 RF Exposure Info pdf 671.76 KiB October 08 2021
various SAR Report-12 RF Exposure Info pdf 747.96 KiB October 08 2021
various SAR Report-13 RF Exposure Info pdf 1.18 MiB October 08 2021
various SAR Report-2 RF Exposure Info pdf 1.36 MiB October 08 2021
various SAR Report-3 RF Exposure Info pdf 1.29 MiB October 08 2021
various SAR Report-4 RF Exposure Info pdf 5.85 MiB October 08 2021
various SAR Report-5 RF Exposure Info pdf 738.46 KiB October 08 2021
various SAR Report-6 RF Exposure Info pdf 789.93 KiB October 08 2021
various SAR Report-7 RF Exposure Info pdf 766.62 KiB October 08 2021
various SAR Report-8 RF Exposure Info pdf 789.60 KiB October 08 2021
various SAR Report-9 RF Exposure Info pdf 702.83 KiB October 08 2021
various Test Setup Photos SAR Test Setup Photos pdf 1.63 MiB October 08 2021
various 2109FS11 SAR 21-1193 RF Exposure Info pdf 3.66 MiB September 30 2021
various C2PC letter ASUS Cover Letter(s) pdf 335.42 KiB September 30 2021
various AX201D2W- Class II Change 20210909 Cover Letter(s) pdf 185.08 KiB September 11 2021 / September 13 2021
various AX201D2W- Confidentiality Request Cover Letter(s) pdf 215.03 KiB September 11 2021 / September 13 2021
various AX201D2W- Declaration of authorization Cover Letter(s) pdf 174.63 KiB September 11 2021 / September 13 2021

frequency equipment class purpose
1 2022-12-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2422 ~ 2462 DTS - Digital Transmission System
4 2022-11-29 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
5 2022-07-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
6 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
7 2422 ~ 2462 DTS - Digital Transmission System
8 2022-06-24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2422 ~ 2462 DTS - Digital Transmission System
11 2022-04-25 2422 ~ 2462 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2022-04-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2462 DTS - Digital Transmission System
16 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
17 2022-03-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 2422 ~ 2462 DTS - Digital Transmission System
19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2022-03-17 2422 ~ 2462 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
23 2022-03-04 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
24 2422 ~ 2462 DTS - Digital Transmission System
25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 2021-10-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
27 2422 ~ 2462 DTS - Digital Transmission System
28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
29 2021-09-30 2422 ~ 2462 DTS - Digital Transmission System
30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 2021-09-13 2422 ~ 2462 DTS - Digital Transmission System
33 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
35 2021-09-01 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
36 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
37 2422 ~ 2462 DTS - Digital Transmission System
38 2021-08-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
39 2422 ~ 2462 DTS - Digital Transmission System
40 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
41 2021-08-10 2422 ~ 2462 DTS - Digital Transmission System
42 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
43 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
44 2021-08-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 2422 ~ 2462 DTS - Digital Transmission System
46 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
47 2021-06-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
48 2422 ~ 2462 DTS - Digital Transmission System
49 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
50 2021-06-10 2422 ~ 2462 DTS - Digital Transmission System
51 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
52 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
53 2021-04-27 2422 ~ 2462 DTS - Digital Transmission System
54 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
56 2021-03-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
58 2422 ~ 2462 DTS - Digital Transmission System
59 2021-02-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
60 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
61 2422 ~ 2462 DTS - Digital Transmission System
62 2021-01-26 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
63 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
64 2422 ~ 2462 DTS - Digital Transmission System
65 2020-10-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
66 2422 ~ 2462 DTS - Digital Transmission System
67 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
68 2020-09-14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
69 2020-09-13 2422 ~ 2462 DTS - Digital Transmission System
70 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 2020-08-27 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
72 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
73 2422 ~ 2462 DTS - Digital Transmission System
74 2020-07-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
75 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
76 2422 ~ 2462 DTS - Digital Transmission System
77 2020-04-10 2422 ~ 2462 DTS - Digital Transmission System
78 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
79 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
80 2019-12-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
81 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
82 2422 ~ 2462 DTS - Digital Transmission System
83 2019-09-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
84 2422 ~ 2462 DTS - Digital Transmission System
85 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
86 2019-09-06 5270 ~ 5310 NII - Unlicensed National Information Infrastructure TX
87 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
88 2422 ~ 2462 DTS - Digital Transmission System
89 2019-09-02 2412 ~ 2472 DTS - Digital Transmission System
90 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
91 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
92 2019-08-26 5290 ~ 5290 NII - Unlicensed National Information Infrastructure TX
93 2019-08-25 2412 ~ 2472 DTS - Digital Transmission System
94 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
95 2019-08-23 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
96 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
97 2422 ~ 2462 DTS - Digital Transmission System
98 2019-08-14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
99 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
100 2402 ~ 2480 DTS - Digital Transmission System
101 2019-03-21 JBP - Part 15 Class B Computing Device Peripheral Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
102 2422 ~ 2462 DTS - Digital Transmission System
103 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
104 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2022-12-19
various 2022-11-29
various 2022-07-12
various 2022-06-24
various 2022-04-25
various 2022-04-22
various 2022-03-21
various 2022-03-17
various 2022-03-04
various 2021-10-08
various 2021-09-30
various 2021-09-13
various 2021-09-01
various 2021-08-23
various 2021-08-10
various 2021-08-02
various 2021-06-17
various 2021-06-10
various 2021-04-27
various 2021-03-09
various 2021-02-07
various 2021-01-26
various 2020-10-05
various 2020-09-14
various 2020-09-13
various 2020-08-27
various 2020-07-01
various 2020-04-10
various 2019-12-30
various 2019-09-10
various 2019-09-06
various 2019-09-02
various 2019-08-26
various 2019-08-25
various 2019-08-23
various 2019-08-14
various 2019-03-21
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various 0005819321
various 0027908797
various Physical Address 1F, No. 15, Lide Rd.
various 4F, No. 150, Li-Te Rd.
various Beitou, Taipei, N/A
various Beitou, Taipei, N/A 112
various Beitou, Taipei
various Peitou, Taipei
various Peitou, Taipei, 112
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various b******@phoenix-testlab.de
various v******@nemko.com
various s******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code AX201D2
app s Person at the applicant's address to receive grant or for contact
various Name J****** Y****
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various Bureau Veritas Consumer Products Services (H.K.)
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various DEKRA Testing and Certification Co., Ltd.
various Name C****** P****
various J****** W****
various K******** L****
various F****** Y********
various E****** L********
various A****** L********
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil. Kwei Shan Dist
various No.19, Hwa Ya 2nd Rd.
various New Taipei City
various Taoyuan
various Taoyuan City
various New Taipei City, 244
various New Taipei City, 24451
various No.5-22, Ruishukeng, Linkou Dist.,, 24451
various New Taipei City, 24441
various Taiwan
various Telephone Number 886-2********
various 886-3********
various 09553********
various +8862********
various +8863********
various 88628******** Extension:
various Fax Number 886-2********
various E-mail c******@dekra.com
various j******@dekra.com
various k******@bureauveritas.com
various f******@dekra.com
various e******@bureauveritas.com
various a******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/03/2023
various08/15/2022
various04/08/2022
various08/30/2022
various03/30/2022
various03/12/2022
various03/01/2022
various02/19/2022
various09/03/2021
various01/30/2022
various12/14/2021
various12/08/2021
various10/25/2021
various09/05/2021
various08/06/2021
various07/25/2021
various04/04/2021
various04/01/2021
various03/13/2021
various02/23/2021
various10/08/2020
various06/28/2020
various02/22/2020
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel WiFi 6 AX201
variousIntel Wi-Fi 6 AX201
variousIntel Wi-Fi 6 AX201 (BT/WiFi)
variousIntel Wi-Fi 6 AX201(BT/WiFi)
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS T3304G with the antenna LUXSHARE-ICT, part no. LA9RF435-CS-H, 14008-05440000. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.30 W/kg and 1.17 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS T3304G with the antenna LUXSHARE-ICT, part no. LA9RF435-CS-H, 14008-05440000. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.30 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS T3304G with the antenna LUXSHARE-ICT, part no. LA9RF435-CS-H, 14008-05440000. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.87 W/kg and 1.17 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br><br>Class II Permissive Change for reduce Wi-Fi output power through BIOS, add new antenna and add certified module into host ASUS, model number: B5302FB, B5302CB. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.21 W/kg and 2.53 W/kg (SPLSR: 0.022 &lt; 0.04 limit) at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for reduce Wi-Fi output power through BIOS, add new antenna and add certified module into host ASUS, model number: B5302FB, B5302CB. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.18 W/kg and 2.53 W/kg (SPLSR: 0.022 &lt; 0.04 limit) at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br><br>Class II Permissive Change for reduce Wi-Fi output power through BIOS, add new antenna and add certified module into host ASUS, model number: B5302FB, B5302CB. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.83 W/kg and 1.46 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br><br> Class II Permissive Change for add certified module into host ASUS, model number: CX1102CKA, CX1102FKA, CX1102CK, C B1102CK, CX1102FK and CB1102FK. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.06 W/kg and 1.06 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br><br> Class II Permissive Change for add certified module into host ASUS, model number: CX1102CKA, CX1102FKA, CX1102CK, C B1102CK, CX1102FK and CB1102FK. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are &lt;0.10 W/kg and 1.06 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br><br> Class II Permissive Change for add certified module into host ASUS, model number: CX1102CKA, CX1102FKA, CX1102CK, C B1102CK, CX1102FK and CB1102FK. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.37 W/kg and 1.06 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.18 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are &lt; 0.10 W/kg and 1.18 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.18 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are &lt; 0.10 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.16 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1500FK and CB1500FK with antenna Pulse, part no. TZ21415(1415-09310A9)/ TZ21425(1415-09320A9) and AWAN, part no. AYP6Y-100297/ AYP6Y-100298. The highest reported Body and Simultaneous SAR values are 0.07 W/kg and 1.25 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1500FK and CB1500FK with antenna Pulse, part no. TZ21415(1415-09310A9)/ TZ21425(1415-09320A9) and AWAN, part no. AYP6Y-100297/ AYP6Y-100298. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 0.79 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHzband operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1500FK and CB1500FK with antenna Pulse, part no. TZ21415(1415-09310A9)/ TZ21425(1415-09320A9) and AWAN, part no. AYP6Y-100297/ AYP6Y-100298. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.25 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1400CK, CB1400CK, CX1400FK and CB1400FK with antenna Pulse, part no. SZ2019D (1415-092M0A9)/ SZ2020E (1415-092S0A9) and AWAN, part no. AYP6Y-100299 and AYP6Y-100300. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.57 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1400CK, CB1400CK, CX1400FK and CB1400FK with antenna Pulse, part no. SZ2019D (1415-092M0A9)/ SZ2020E (1415-092S0A9) and AWAN, part no. AYP6Y-100299/ AYP6Y-100300. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.39 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX1400CK, CB1400CK, CX1400FK and CB1400FK with antenna Pulse, part no. SZ2019D (1415-092M0A9)/ SZ2020E (1415-092S0A9) and AWAN, part no. AYP6Y-100299 and AYP6Y-100300. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.27 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: H7600Z, J7600Z, and W7600Z. Reduce WIFI output power through BIOS and add new antennas. INPAG model no.: 14008- 05000000 and 14008-05000100. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.83 W/kg and 0.98 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: H7600Z, J7600Z, and W7600Z. Reduce WIFI output power through BIOS and add new antennas. INPAG model no.: 14008-05000000 and 14008- 05000100. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.49 W/kg and 0.90 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: H7600Z, J7600Z, and W7600Z. Reduce WIFI output power through BIOS and add new antenna. INPAG model no.: 14008-05000000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.15 W/kg and 0.98 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B7402FE, B7400FE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.32 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B7402FE, B7400FE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.04 W/kg and 1.36 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B7402FE, B7400FE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.09 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for add additional chassis ASUSTeK, model number: T3300K, Reduce WIFI output power through BIOS and add new antennas. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.72 W/kg and 1.29 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for add additional chassis ASUSTeK, model number: T3300K, Reduce WIFI output power through BIOS and add new antennas. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.79 W/kg and 1.52 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for add additional chassis ASUSTeK, model number: T3300K, Reduce WIFI output power through BIOS and add new antennas. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.41 W/kg and 1.14 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CX3400FM and CB3400FM with antenna AWAN, part no. AYP6Y-100219 and AYP6Y-100220. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.43 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX3400FM, and CB3400FM with antenna AWAN, part no. AYP6Y-100219 and AYP6Y-100220. The highest reported reported Body and Simultaneous SAR values are 0.25 W/kg and 1.43 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUSCX3400FM and CB3400FM with antenna AWAN, part no. AYP6Y-100219 and AYP6Y-100220. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. WA-F-LBLB-04-075/14008-04620000 and WA-F-LBLB-04-078/14008-04620100. The highest reported reported Body and Simultaneous SAR values are 1.13 W/kg and 1.43 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. WA-F-LBLB-04-075/14008-04620000 and WA-F-LBLB-04-078/14008-04620100. The highest reported reported Body and Simultaneous SAR values are 0.30 W/kg and1.09 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. WA-F-LBLB-04-075/14008-04620000 and WA-F-LBLB-04-078/14008-04620100. The highest reported reported Body and Simultaneous SAR values are 0.80 W/kg and1.09 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS W7600H and J7600H with antenna INPAQ, part no. WA-F-LB-02-263, WA-F-LB-01-101, 14008-04690000 and 14008-04690100. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 0.54 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS W7600Hand J7600H with antenna INPAQ, part no. WA-F-LB-02-263, WA-F-LB-01-101, 14008-04690000 and 14008-04690100. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.44 W/kg and 0.89 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS W7600Hand J7600H with antenna INPAQ, part no. WA-F-LB-02-263, WA-F-LB-01-101, 14008-04690000 and 14008-04690100. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.06 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS UX582H,RX582H and UX5100H with antenna specified in this filing. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.29 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS UX582H,RX582H and UX5100H with antenna specified in this filing. The highest reported reported Body and Simultaneous SAR values are 0.95 W/kg and 1.13 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS UX582H, RX582H and UX5100H with antenna specified in this filing. The highest reported reported Body and Simultaneous SAR values are 0.18 W/kg and 1.29 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: CR1100FK, CR1100CK, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.14 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: CR1100FK, CR1100CK, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.72 W/kg and 0.80 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: CR1100FK, CR1100CK, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.11 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: UX5400E, BX5400E, RX5400E; with antennas: AWAN, part no. AML6Y-100115 (14008-04470100) and AML6Y-100115 (14008-04470300); LUXSHARE, part no. LA9RF329-CS-H (14008-04470000), LA9RF330-CS-H (14008-04470300). The highest reported SAR values is 1.37 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. 1415-08EH0A9/WA-F-JBJB-04-07 and 1415-08EH0A9/WA-F-JBJB-04-075. The highest reported reported Body and Simultaneous SAR values are 0.80W/kg and1.09W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. 1415-08EH0A9/WA-F-JBJB-04-07 and 1415-08EH0A9/WA-F-JBJB-04-075. The highest reported reported Body and Simultaneous SAR values are 1.13W/kg and 1.43W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CX5400FM and CB5400FM with antenna INPAQ, part no. 1415-08EH0A9/WA-F-JBJB-04-07 and 1415-08EH0A9/WA-F-JBJB-04-075. The highest reported reported Body and Simultaneous SAR values are 0.30W/kg and 1.09W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B3302FE, B5302FE, P3350FE, PX375FE, BW370FE, B3302CE, B5302CE, P3350CE, PX375CE, BW370CE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.92 W/kg and 1.49 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B3302FE, B5302FE, P3350FE, PX375FE, BW370FE, B3302CE, B5302CE, P3350CE, PX375CE, BW370CE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.24 W/kg and 1.40 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B3302FE, B5302FE, P3350FE, PX375FE, BW370FE, B3302CE, B5302CE, P3350CE, PX375CE, BW370CE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.16 W/kg and 1.40 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UX582L, RX582L and UX5100L with antenna Luxsharel, part no. LA9RF276-CS-H, LA9RF277-CS-H, 14008-04210000 and 14008-04210100. SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are 0.15W/kg and 1.00W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UX582L, RX582L and UX5100L with antenna Luxsharel, part no. LA9RF276-CS-H, LA9RF277-CS-H, 14008-04210000 and 14008-04210100. SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are 1.04W/kg and 1.04W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UX582L, RX582L and UX5100L with antenna Luxsharel, part no. LA9RF276-CS-H, LA9RF277-CS-H, 14008-04210000 and 14008-04210100. SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are 1.12W/kg and 1.00W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UX564E, Q528E, Q538E, RX564E, UX564P and RX564P with antenna AWAN, part no. AML6Y-200017, AML6Y-100109, 14008-04160200 and 14008-04160000. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 0.16 W/kg and 1.32 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUSUX564E,Q528E, Q538E, RX564E, UX564P and RX564P with antenna AWAN, part no. AML6Y-200017, AML6Y-100109, 14008-04160200 and 14008-04160000. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 0.94 W/kg and 0.94 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UX564E,Q528E, Q538E, RX564E, UX564P and RX564P with antenna AWAN, part no. AML6Y-200017, AML6Y-100109, 14008-04160200 and 14008-04160000. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 1.12 W/kg and 1.06 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA, CL5500FDA, C536E and C536EA with antenna AWAN, part no. AYF6Y-100026 andAYF6Y-100027. The highest reported reported Body and Simultaneous SAR values are 1.12W/kg and 1.31W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA, CL5500FDA, C536E and C536EA with antenna AWAN, part no. AYF6Y-100026 andAYF6Y-100027. The highest reported reported Body and Simultaneous SAR values are 0.19W/kg and 1.31W/kg.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA, CL5500FDA, C536E and C536EA with antenna AWAN, part no. AYF6Y-100026 andAYF6Y-100027. The highest reported reported Body and Simultaneous SAR values are 0.96W/kg and 1.15W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This c2pc filing establishes portable category SAR conditions for ASUS with models of UX564E, Q528E, Q538E and RX564W, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.09 W/kg and 1.54 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This c2pc filing establishes portable category SAR conditions for ASUS with models of UX564E, Q528E, Q538E and RX564W, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.16 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This c2pc filing establishes portable category SAR conditions for ASUS with models of UX564E, Q528E, Q538E and RX564W, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09 W/kg and 1.54 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: BX435E, RX435E, UX435E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.30 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: BX435E, RX435E, UX435E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.06 W/kg and 1.30 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: BX435E, RX435E, UX435E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.13 W/kg and 1.30 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) To request approval for portable category specific host Notebook PC, model number: ASUS UX535L and BX535L with the antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000, 14008-04150200 and LUXSHARE, part no. LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100, 14008-04150300. (2) The device decreases in the WLAN Output Power through firmware and proximity-Sensor respectively. The highest reported Body and Simultaneous SAR values are 1.03 W/kg and 1.56 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: (1) To request approval for portable category specific host Notebook PC, model number: ASUS UX535L and BX535L with the antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000, 14008-04150200 and LUXSHARE, part no. LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100, 14008-04150300. (2) The device decreases in the WLAN Output Power through firmware and proximity-Sensor respectively. The highest reported Body and Simultaneous SAR values are &lt; 0.10 W/kg and 1.56 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) To request approval for portable category specific host Notebook PC, model number: ASUS UX535L and BX535L with the antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000, 14008-04150200 and LUXSHARE, part no. LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100, 14008-04150300. (2) The device decreases in the WLAN Output Power through firmware and proximity-Sensor respectively. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.13 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX363J, UX371J, BX363J, BX371J, RX363J, RX371J, UX363E, UX371E, BX363E, BX371E, RX363E and RX371E, with antenna LUXSHARE, part no. LA9RF265-CS-H, LA9RF266-CS-H, 14008-04050200, 14008-04050000 and INPAQ, part no. MDA-LB-02-022, MDA-LB-01-011, 14008-04050300, 14008-04050100. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.20W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX363J, UX371J, BX363J, BX371J, RX363J, RX371J, UX363E, UX371E, BX363E, BX371E, RX363E and RX371E, with antenna LUXSHARE, part no. LA9RF265-CS-H, LA9RF266-CS-H, 14008-04050200, 14008-04050000 and INPAQ, part no. MDA-LB-02-022, MDA-LB-01-011, 14008-04050300, 14008-04050100. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.02W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX363J, UX371J, BX363J, BX371J, RX363J, RX371J, UX363E, UX371E, BX363E, BX371E, RX363E and RX371E, with antenna LUXSHARE, part no. LA9RF265-CS-H, LA9RF266-CS-H, 14008-04050200, 14008-04050000 and INPAQ, part no. MDA-LB-02-022, MDA-LB-01-011, 14008-04050300, 14008-04050100. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.55W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: UX393J, BX393J, UX393E, BX393E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.01 W/kg and 1.51 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: UX393J, BX393J, UX393E, BX393E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.10 W/kg and 1.51 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the portable configuration host of ASUS Notebook PC, model: UX393J, BX393J, UX393E, BX393E, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.41 W/kg and 1.51 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: C436F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.32 W/kg and 1.47 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: C436F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.15 W/kg and 1.57 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: C436F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.47 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX463F / Q427F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.18 W/kg and 1.48 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX463F / Q427F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.06 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX463F / Q427F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.08 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX563F, Q537F, Q547F, RX563F, and BX563F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.97 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX563F, Q537F, Q547F, RX563F, and BX563F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.13 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX563F, Q537F, Q547F, RX563F, and BX563F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.93 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX434F, BX434F, U4600F, UX433FLC, UX433FAC, BX433FLC, BX433FAC, RX434F, RX433FLC, and RX433FAC, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.93 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX434F, BX434F, U4600F, UX433FLC, UX433FAC, BX433FLC, BX433FAC, RX434F, RX433FLC, and RX433FAC, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.10 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX434F, BX434F, U4600F, UX433FLC, UX433FAC, BX433FLC, BX433FAC, RX434F, RX433FLC, and RX433FAC, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.17 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX562FA, Q506F, Q526F as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.88 W/kg and 1.56 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX562FA, Q506F, Q526F as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.69 W/kg and 1.32 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX562FA, Q506F, Q526F as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.32 W/kg and 1.2 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: UX334F, U3600F, BX334F, RX334F, UX333FLC, UX333FAC, BX333FLC, BX333FAC, RX333FLC and RX333FAC, with antenna Hong-Bo, part no. 260-26223, 260-26224, 14008-03600000, 14008-03600100 and LUXSHARE, part no. LA9RF195-CS-H, LA9RF196-CS-H, 14008-03480200, 14008-03480300. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.33W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: UX334F, U3600F, BX334F, RX334F, UX333FLC, UX333FAC, BX333FLC, BX333FAC, RX333FLC and RX333FAC, with antenna Hong-Bo, part no. 260-26223, 260-26224, 14008-03600000, 14008-03600100 and LUXSHARE, part no. LA9RF195-CS-H, LA9RF196-CS-H, 14008-03480200, 14008-03480300. The highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.33W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: UX334F, U3600F, BX334F, RX334F, UX333FLC, UX333FAC, BX333FLC, BX333FAC, RX333FLC and RX333FAC, with antenna Hong-Bo, part no. 260-26223, 260-26224, 14008-03600000, 14008-03600100 and LUXSHARE, part no. LA9RF195-CS-H, LA9RF196-CS-H, 14008-03480200, 14008-03480300. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX481F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.04 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX481F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.08 W/kg and 1.18 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: UX481F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.09 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Intel Corporation S.A.S.
various SGS Taiwan Ltd. Central RF Lab
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various A Test Lab Techno Corp.
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various Name M**** L********
various N******** A********
various R****** W********
various R****** C****
various F**** L****
various V****** L******
various E******** L********
various M**** W********
various S****** H******
various J**** L******
various Telephone Number +886-******** Extension:
various 00334********
various +886-******** Extension:
various +886-********
various 886-3********
various 88628******** Extension:
various 886-3********
various +886-******** Extension:
various 00334********
various Fax Number +886-********
various +886-********
various 886-3********
various 88628********
various +886-********
various +886-********
various 00334********
various E-mail m******@dekra.com
various n******@intel.com
various r******@sgs.com
various r******@bureauveritas.com
various f******@atl-lab.com.tw
various v******@dekra.com
various e******@bureauveritas.com
various m******@atl-lab.com.tw
various s******@dekra.com
various J******@atl-lab.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.145
2 2 15E CC MO 5190 5230 0.13
2 3 15E CC MO 5210 5210 0.095
2 4 15E CC MO 5250 5250 0.084
2 5 15E CC MO ND 5260 5320 0.145
2 6 15E CC MO ND 5270 5310 0.124
2 7 15E CC MO ND 5290 5290 0.086
2 8 15E CC MO ND 5500 5700 0.141
2 9 15E CC MO ND 5510 5670 0.138
2 1 15E CC MO ND 5530 5690 0.15
2 11 15E CC MO ND 5710 5710 0.149
2 12 15E CC MO ND 5720 5720 0.105
2 13 15E CC MO 5745 5825 0.139
2 14 15E CC MO 5755 5795 0.135
2 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.007
3 2 15C CC MO 2412 2472 0.955
3 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.145
4 2 15E CC MO 5190 5230 0.13
4 3 15E CC MO 5210 5210 0.095
4 4 15E CC MO 5250 5250 0.084
4 5 15E CC MO ND 5260 5320 0.145
4 6 15E CC MO ND 5270 5310 0.124
4 7 15E CC MO ND 5290 5290 0.086
4 8 15E CC MO ND 5500 5700 0.141
4 9 15E CC MO ND 5510 5670 0.138
4 1 15E CC MO ND 5530 5690 0.15
4 11 15E CC MO ND 5710 5710 0.149
4 12 15E CC MO ND 5720 5720 0.105
4 13 15E CC MO 5745 5825 0.139
4 14 15E CC MO 5755 5795 0.135
4 15 15E CC MO 5775 5775 0.109
4 16 15E CC MO 5845 5885 0.322
4 17 15E CC MO 5835 5875 0.692
4 18 15E CC MO 5855 5855 0.422
4 19 15E CC MO 5815 5815 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.145
6 2 15E CC MO 5190 5230 0.13
6 3 15E CC MO 5210 5210 0.095
6 4 15E CC MO 5250 5250 0.084
6 5 15E CC MO ND 5260 5320 0.145
6 6 15E CC MO ND 5270 5310 0.124
6 7 15E CC MO ND 5290 5290 0.086
6 8 15E CC MO ND 5500 5700 0.141
6 9 15E CC MO ND 5510 5670 0.138
6 1 15E CC MO ND 5530 5690 0.15
6 11 15E CC MO ND 5710 5710 0.149
6 12 15E CC MO ND 5720 5720 0.105
6 13 15E CC MO 5745 5825 0.139
6 14 15E CC MO 5755 5795 0.135
6 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.007
7 2 15C CC MO 2412 2472 0.955
7 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.145
8 2 15E CC MO 5190 5230 0.13
8 3 15E CC MO 5210 5210 0.095
8 4 15E CC MO 5250 5250 0.084
8 5 15E CC MO ND 5260 5320 0.145
8 6 15E CC MO ND 5270 5310 0.124
8 7 15E CC MO ND 5290 5290 0.086
8 8 15E CC MO ND 5500 5700 0.141
8 9 15E CC MO ND 5510 5670 0.138
8 1 15E CC MO ND 5530 5690 0.15
8 11 15E CC MO ND 5710 5710 0.149
8 12 15E CC MO ND 5720 5720 0.105
8 13 15E CC MO 5745 5825 0.139
8 14 15E CC MO 5755 5795 0.135
8 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.007
10 2 15C CC MO 2412 2472 0.955
10 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.007
11 2 15C CC MO 2412 2472 0.955
11 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.145
13 2 15E CC MO 5190 5230 0.13
13 3 15E CC MO 5210 5210 0.095
13 4 15E CC MO 5250 5250 0.084
13 5 15E CC MO ND 5260 5320 0.145
13 6 15E CC MO ND 5270 5310 0.124
13 7 15E CC MO ND 5290 5290 0.086
13 8 15E CC MO ND 5500 5700 0.141
13 9 15E CC MO ND 5510 5670 0.138
13 1 15E CC MO ND 5530 5690 0.15
13 11 15E CC MO ND 5710 5710 0.149
13 12 15E CC MO ND 5720 5720 0.105
13 13 15E CC MO 5745 5825 0.139
13 14 15E CC MO 5755 5795 0.135
13 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.007
15 2 15C CC MO 2412 2472 0.955
15 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.145
16 2 15E CC MO 5190 5230 0.13
16 3 15E CC MO 5210 5210 0.095
16 4 15E CC MO 5250 5250 0.084
16 5 15E CC MO ND 5260 5320 0.145
16 6 15E CC MO ND 5270 5310 0.124
16 7 15E CC MO ND 5290 5290 0.086
16 8 15E CC MO ND 5500 5700 0.141
16 9 15E CC MO ND 5510 5670 0.138
16 1 15E CC MO ND 5530 5690 0.15
16 11 15E CC MO ND 5710 5710 0.149
16 12 15E CC MO ND 5720 5720 0.105
16 13 15E CC MO 5745 5825 0.139
16 14 15E CC MO 5755 5795 0.135
16 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.007
18 2 15C CC MO 2412 2472 0.955
18 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO 5180 5240 0.145
19 2 15E CC MO 5190 5230 0.13
19 3 15E CC MO 5210 5210 0.095
19 4 15E CC MO 5250 5250 0.084
19 5 15E CC MO ND 5260 5320 0.145
19 6 15E CC MO ND 5270 5310 0.124
19 7 15E CC MO ND 5290 5290 0.086
19 8 15E CC MO ND 5500 5700 0.141
19 9 15E CC MO ND 5510 5670 0.138
19 1 15E CC MO ND 5530 5690 0.15
19 11 15E CC MO ND 5710 5710 0.149
19 12 15E CC MO ND 5720 5720 0.105
19 13 15E CC MO 5745 5825 0.139
19 14 15E CC MO 5755 5795 0.135
19 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.007
20 2 15C CC MO 2412 2472 0.955
20 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.145
22 2 15E CC MO 5190 5230 0.13
22 3 15E CC MO 5210 5210 0.095
22 4 15E CC MO 5250 5250 0.084
22 5 15E CC MO ND 5260 5320 0.145
22 6 15E CC MO ND 5270 5310 0.124
22 7 15E CC MO ND 5290 5290 0.086
22 8 15E CC MO ND 5500 5700 0.141
22 9 15E CC MO ND 5510 5670 0.138
22 1 15E CC MO ND 5530 5690 0.15
22 11 15E CC MO ND 5710 5710 0.149
22 12 15E CC MO ND 5720 5720 0.105
22 13 15E CC MO 5745 5825 0.139
22 14 15E CC MO 5755 5795 0.135
22 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.145
23 2 15E CC MO 5190 5230 0.13
23 3 15E CC MO 5210 5210 0.095
23 4 15E CC MO 5250 5250 0.084
23 5 15E CC MO ND 5260 5320 0.145
23 6 15E CC MO ND 5270 5310 0.124
23 7 15E CC MO ND 5290 5290 0.086
23 8 15E CC MO ND 5500 5700 0.141
23 9 15E CC MO ND 5510 5670 0.138
23 1 15E CC MO ND 5530 5690 0.15
23 11 15E CC MO ND 5710 5710 0.149
23 12 15E CC MO ND 5720 5720 0.105
23 13 15E CC MO 5745 5825 0.139
23 14 15E CC MO 5755 5795 0.135
23 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.007
24 2 15C CC MO 2412 2472 0.955
24 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.007
27 2 15C CC MO 2412 2472 0.955
27 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5180 5240 0.145
28 2 15E CC MO 5190 5230 0.13
28 3 15E CC MO 5210 5210 0.095
28 4 15E CC MO 5250 5250 0.084
28 5 15E CC MO ND 5260 5320 0.145
28 6 15E CC MO ND 5270 5310 0.124
28 7 15E CC MO ND 5290 5290 0.086
28 8 15E CC MO ND 5500 5700 0.141
28 9 15E CC MO ND 5510 5670 0.138
28 1 15E CC MO ND 5530 5690 0.15
28 11 15E CC MO ND 5710 5710 0.149
28 12 15E CC MO ND 5720 5720 0.105
28 13 15E CC MO 5745 5825 0.139
28 14 15E CC MO 5755 5795 0.135
28 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.007
29 2 15C CC MO 2412 2472 0.955
29 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5180 5240 0.145
30 2 15E CC MO 5190 5230 0.13
30 3 15E CC MO 5210 5210 0.095
30 4 15E CC MO 5250 5250 0.084
30 5 15E CC MO ND 5260 5320 0.145
30 6 15E CC MO ND 5270 5310 0.124
30 7 15E CC MO ND 5290 5290 0.086
30 8 15E CC MO ND 5500 5700 0.141
30 9 15E CC MO ND 5510 5670 0.138
30 1 15E CC MO ND 5530 5690 0.15
30 11 15E CC MO ND 5710 5710 0.149
30 12 15E CC MO ND 5720 5720 0.105
30 13 15E CC MO 5745 5825 0.139
30 14 15E CC MO 5755 5795 0.135
30 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.007
32 2 15C CC MO 2412 2472 0.955
32 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.145
34 2 15E CC MO 5190 5230 0.13
34 3 15E CC MO 5210 5210 0.095
34 4 15E CC MO 5250 5250 0.084
34 5 15E CC MO ND 5260 5320 0.145
34 6 15E CC MO ND 5270 5310 0.124
34 7 15E CC MO ND 5290 5290 0.086
34 8 15E CC MO ND 5500 5700 0.141
34 9 15E CC MO ND 5510 5670 0.138
34 1 15E CC MO ND 5530 5690 0.15
34 11 15E CC MO ND 5710 5710 0.149
34 12 15E CC MO ND 5720 5720 0.105
34 13 15E CC MO 5745 5825 0.139
34 14 15E CC MO 5755 5795 0.135
34 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15E CC MO 5180 5240 0.145
35 2 15E CC MO 5190 5230 0.13
35 3 15E CC MO 5210 5210 0.095
35 4 15E CC MO 5250 5250 0.084
35 5 15E CC MO ND 5260 5320 0.145
35 6 15E CC MO ND 5270 5310 0.124
35 7 15E CC MO ND 5290 5290 0.086
35 8 15E CC MO ND 5500 5700 0.141
35 9 15E CC MO ND 5510 5670 0.138
35 1 15E CC MO ND 5530 5690 0.15
35 11 15E CC MO ND 5710 5710 0.149
35 12 15E CC MO ND 5720 5720 0.105
35 13 15E CC MO 5745 5825 0.139
35 14 15E CC MO 5755 5795 0.135
35 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402 2480 0.007
37 2 15C CC MO 2412 2472 0.955
37 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402 2480 0.007
39 2 15C CC MO 2412 2472 0.955
39 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC MO 5180 5240 0.145
40 2 15E CC MO 5190 5230 0.13
40 3 15E CC MO 5210 5210 0.095
40 4 15E CC MO 5250 5250 0.084
40 5 15E CC MO ND 5260 5320 0.145
40 6 15E CC MO ND 5270 5310 0.124
40 7 15E CC MO ND 5290 5290 0.086
40 8 15E CC MO ND 5500 5700 0.141
40 9 15E CC MO ND 5510 5670 0.138
40 1 15E CC MO ND 5530 5690 0.15
40 11 15E CC MO ND 5710 5710 0.149
40 12 15E CC MO 5720 5720 0.105
40 13 15E CC MO 5745 5825 0.139
40 14 15E CC MO 5755 5795 0.135
40 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.007
41 2 15C CC MO 2412 2472 0.955
41 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E CC MO 5180 5240 0.145
42 2 15E CC MO 5190 5230 0.13
42 3 15E CC MO 5210 5210 0.095
42 4 15E CC MO 5250 5250 0.084
42 5 15E CC MO ND 5260 5320 0.145
42 6 15E CC MO ND 5270 5310 0.124
42 7 15E CC MO ND 5290 5290 0.086
42 8 15E CC MO ND 5500 5700 0.141
42 9 15E CC MO ND 5510 5670 0.138
42 1 15E CC MO ND 5530 5690 0.15
42 11 15E CC MO ND 5710 5710 0.149
42 12 15E CC MO ND 5720 5720 0.105
42 13 15E CC MO 5745 5825 0.139
42 14 15E CC MO 5755 5795 0.135
42 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402 2480 0.007
45 2 15C CC MO 2412 2472 0.955
45 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC MO 5180 5240 0.145
46 2 15E CC MO 5190 5230 0.13
46 3 15E CC MO 5210 5210 0.095
46 4 15E CC MO 5250 5250 0.084
46 5 15E CC MO ND 5260 5320 0.145
46 6 15E CC MO ND 5270 5310 0.124
46 7 15E CC MO ND 5290 5290 0.086
46 8 15E CC MO ND 5500 5700 0.141
46 9 15E CC MO ND 5510 5670 0.138
46 1 15E CC MO ND 5530 5690 0.15
46 11 15E CC MO ND 5710 5710 0.149
46 12 15E CC MO ND 5720 5720 0.105
46 13 15E CC MO 5745 5825 0.139
46 14 15E CC MO 5755 5795 0.135
46 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402 2480 0.007
48 2 15C CC MO 2412 2472 0.955
48 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15E CC MO 5180 5240 0.145
49 2 15E CC MO 5190 5230 0.13
49 3 15E CC MO 5210 5210 0.095
49 4 15E CC MO 5250 5250 0.084
49 5 15E CC MO ND 5260 5320 0.145
49 6 15E CC MO ND 5270 5310 0.124
49 7 15E CC MO ND 5290 5290 0.086
49 8 15E CC MO ND 5500 5700 0.141
49 9 15E CC MO ND 5510 5670 0.138
49 1 15E CC MO ND 5530 5690 0.15
49 11 15E CC MO ND 5710 5710 0.149
49 12 15E CC MO ND 5720 5720 0.105
49 13 15E CC MO 5745 5825 0.139
49 14 15E CC MO 5755 5795 0.135
49 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402 2480 0.007
50 2 15C CC MO 2412 2472 0.955
50 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E CC MO 5180 5240 0.145
51 2 15E CC MO 5190 5230 0.13
51 3 15E CC MO 5210 5210 0.095
51 4 15E CC MO 5250 5250 0.084
51 5 15E CC MO ND 5260 5320 0.145
51 6 15E CC MO ND 5270 5310 0.124
51 7 15E CC MO ND 5290 5290 0.086
51 8 15E CC MO ND 5500 5700 0.141
51 9 15E CC MO ND 5510 5670 0.138
51 1 15E CC MO ND 5530 5690 0.15
51 11 15E CC MO ND 5710 5710 0.149
51 12 15E CC MO ND 5720 5720 0.105
51 13 15E CC MO 5745 5825 0.139
51 14 15E CC MO 5755 5795 0.135
51 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402.00000000 2480.00000000 0.1000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402 2480 0.007
53 2 15C CC MO 2412 2472 0.955
53 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC MO 5180 5240 0.145
55 2 15E CC MO 5190 5230 0.13
55 3 15E CC MO 5210 5210 0.095
55 4 15E CC MO 5250 5250 0.084
55 5 15E CC MO ND 5260 5320 0.145
55 6 15E CC MO ND 5270 5310 0.124
55 7 15E CC MO ND 5290 5290 0.086
55 8 15E CC MO ND 5500 5700 0.141
55 9 15E CC MO ND 5510 5670 0.138
55 1 15E CC MO ND 5530 5690 0.15
55 11 15E CC MO ND 5710 5710 0.149
55 12 15E CC MO ND 5720 5720 0.105
55 13 15E CC MO 5745 5825 0.139
55 14 15E CC MO 5755 5795 0.135
55 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15E CC MO 5180 5240 0.145
57 2 15E CC MO 5190 5230 0.13
57 3 15E CC MO 5210 5210 0.095
57 4 15E CC MO 5250 5250 0.084
57 5 15E CC MO ND 5260 5320 0.145
57 6 15E CC MO ND 5270 5310 0.124
57 7 15E CC MO ND 5290 5290 0.086
57 8 15E CC MO ND 5500 5700 0.141
57 9 15E CC MO ND 5510 5670 0.138
57 1 15E CC MO ND 5530 5690 0.15
57 11 15E CC MO ND 5710 5710 0.149
57 12 15E CC MO ND 5720 5720 0.105
57 13 15E CC MO 5745 5825 0.139
57 14 15E CC MO 5755 5795 0.135
57 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402 2480 0.007
58 2 15C CC MO 2412 2472 0.955
58 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15E CC MO 5180 5240 0.145
60 2 15E CC MO 5190 5230 0.13
60 3 15E CC MO 5210 5210 0.095
60 4 15E CC MO 5250 5250 0.084
60 5 15E CC MO ND 5260 5320 0.145
60 6 15E CC MO ND 5270 5310 0.124
60 7 15E CC MO ND 5290 5290 0.086
60 8 15E CC M4 MO 5500 5700 0.141
60 9 15E CC MO ND 5510 5670 0.138
60 1 15E CC MO ND 5530 5690 0.15
60 11 15E CC MO ND 5710 5710 0.149
60 12 15E CC MO ND 5720 5720 0.105
60 13 15E CC MO 5745 5825 0.139
60 14 15E CC MO 5755 5795 0.135
60 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402 2480 0.007
61 2 15C CC MO 2412 2472 0.955
61 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E CC MO 5180 5240 0.145
62 2 15E CC MO 5190 5230 0.13
62 3 15E CC MO 5210 5210 0.095
62 4 15E CC MO ND 5250 5250 0.084
62 5 15E CC MO ND 5260 5320 0.145
62 6 15E CC MO ND 5270 5310 0.124
62 7 15E CC MO ND 5290 5290 0.086
62 8 15E CC MO ND 5500 5700 0.141
62 9 15E CC MO ND 5510 5670 0.138
62 1 15E CC MO ND 5530 5690 0.15
62 11 15E CC MO ND 5710 5710 0.149
62 12 15E CC MO ND 5720 5720 0.105
62 13 15E CC MO 5745 5825 0.139
62 14 15E CC MO 5755 5795 0.135
62 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402.00000000 2480.00000000 0.1000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402 2480 0.007
64 2 15C CC MO 2412 2472 0.955
64 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15E CC MO 5180 5240 0.145
65 2 15E CC MO 5190 5230 0.13
65 3 15E CC MO 5210 5210 0.095
65 4 15E CC MO 5250 5250 0.084
65 5 15E CC MO ND 5260 5320 0.145
65 6 15E CC MO ND 5270 5310 0.124
65 7 15E CC MO ND 5290 5290 0.086
65 8 15E CC MO ND 5500 5700 0.141
65 9 15E CC MO ND 5510 5670 0.138
65 1 15E CC MO ND 5530 5690 0.15
65 11 15E CC MO ND 5710 5710 0.149
65 12 15E CC MO ND 5720 5720 0.105
65 13 15E CC MO 5745 5825 0.139
65 14 15E CC MO 5755 5795 0.135
65 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15C CC 2402 2480 0.007
66 2 15C CC MO 2412 2472 0.955
66 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC MO 5180 5240 0.145
68 2 15E CC MO 5190 5230 0.13
68 3 15E CC MO 5210 5210 0.095
68 4 15E CC MO 5250 5250 0.084
68 5 15E CC MO ND 5260 5320 0.145
68 6 15E CC MO ND 5270 5310 0.124
68 7 15E CC MO ND 5290 5290 0.086
68 8 15E CC MO ND 5500 5700 0.141
68 9 15E CC MO ND 5510 5670 0.138
68 1 15E CC MO ND 5530 5690 0.15
68 11 15E CC MO ND 5710 5710 0.149
68 12 15E CC MO ND 5720 5720 0.105
68 13 15E CC MO 5745 5825 0.139
68 14 15E CC MO 5755 5795 0.135
68 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402 2480 0.007
69 2 15C CC MO 2412 2472 0.955
69 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15E CC MO 5180 5240 0.145
71 2 15E CC MO 5190 5230 0.13
71 3 15E CC MO 5210 5210 0.095
71 4 15E CC MO 5250 5250 0.084
71 5 15E CC MO ND 5260 5320 0.145
71 6 15E CC MO ND 5270 5310 0.124
71 7 15E CC MO ND 5290 5290 0.086
71 8 15E CC MO ND 5500 5700 0.141
71 9 15E CC MO ND 5510 5670 0.138
71 1 15E CC MO ND 5530 5690 0.15
71 11 15E CC MO ND 5710 5710 0.149
71 12 15E CC MO ND 5720 5720 0.105
71 13 15E CC MO 5745 5825 0.139
71 14 15E CC MO 5755 5795 0.135
71 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402 2480 0.007
73 2 15C CC MO 2412 2472 0.955
73 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15E CC MO 5180 5240 0.145
75 2 15E CC MO 5190 5230 0.13
75 3 15E CC MO 5210 5210 0.095
75 4 15E CC MO 5250 5250 0.084
75 5 15E CC MO ND 5260 5320 0.145
75 6 15E CC MO ND 5270 5310 0.124
75 7 15E CC MO ND 5290 5290 0.086
75 8 15E CC MO ND 5500 5700 0.141
75 9 15E CC MO ND 5510 5670 0.138
75 1 15E CC MO ND 5530 5690 0.15
75 11 15E CC MO ND 5710 5710 0.149
75 12 15E CC MO ND 5720 5720 0.105
75 13 15E CC MO 5745 5825 0.139
75 14 15E CC MO 5755 5795 0.135
75 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402 2480 0.007
76 2 15C CC MO 2412 2472 0.955
76 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402 2480 0.007
77 2 15C CC MO 2412 2472 0.955
77 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15E CC MO 5180 5240 0.145
78 2 15E CC MO 5190 5230 0.13
78 3 15E CC MO 5210 5210 0.095
78 4 15E CC MO 5250 5250 0.084
78 5 15E CC MO ND 5260 5320 0.145
78 6 15E CC MO ND 5270 5310 0.124
78 7 15E CC MO ND 5290 5290 0.086
78 8 15E CC MO ND 5500 5700 0.141
78 9 15E CC MO ND 5510 5670 0.138
78 1 15E CC MO ND 5530 5690 0.15
78 11 15E CC MO ND 5710 5710 0.149
78 12 15E CC MO ND 5720 5720 0.105
78 13 15E CC MO 5745 5825 0.139
78 14 15E CC MO 5755 5795 0.135
78 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15E CC MO 5180 5240 0.145
81 2 15E CC MO 5190 5230 0.13
81 3 15E CC MO 5210 5210 0.095
81 4 15E CC MO 5250 5250 0.084
81 5 15E CC MO ND 5260 5320 0.145
81 6 15E CC MO ND 5270 5310 0.124
81 7 15E CC MO ND 5290 5290 0.086
81 8 15E CC MO ND 5500 5700 0.141
81 9 15E CC MO ND 5510 5670 0.138
81 1 15E CC MO ND 5530 5690 0.15
81 11 15E CC MO ND 5710 5710 0.149
81 12 15E CC MO ND 5720 5720 0.105
81 13 15E CC MO 5745 5825 0.139
81 14 15E CC MO 5755 5795 0.135
81 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15C CC 2402 2480 0.007
82 2 15C CC MO 2412 2472 0.955
82 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15C CC 2402 2480 0.007
84 2 15C CC MO 2412 2472 0.955
84 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15E CC MO 5180 5240 0.145
85 2 15E CC MO 5190 5230 0.13
85 3 15E CC MO 5210 5210 0.095
85 4 15E CC MO 5250 5250 0.084
85 5 15E CC MO ND 5260 5320 0.145
85 6 15E CC MO ND 5270 5310 0.124
85 7 15E CC MO ND 5290 5290 0.086
85 8 15E CC MO ND 5500 5700 0.141
85 9 15E CC MO ND 5510 5670 0.138
85 1 15E CC MO ND 5530 5690 0.15
85 11 15E CC MO ND 5710 5710 0.149
85 12 15E CC MO ND 5720 5720 0.105
85 13 15E CC MO 5745 5825 0.139
85 14 15E CC MO 5755 5795 0.135
85 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15E CC MO 5180 5240 0.145
86 2 15E CC MO 5190 5230 0.13
86 3 15E CC MO 5210 5210 0.095
86 4 15E CC MO 5250 5250 0.084
86 5 15E CC MO ND 5260 5320 0.145
86 6 15E CC MO ND 5270 5310 0.124
86 7 15E CC MO ND 5290 5290 0.086
86 8 15E CC MO ND 5500 5700 0.141
86 9 15E CC MO ND 5510 5670 0.138
86 1 15E CC MO ND 5530 5690 0.15
86 11 15E CC MO ND 5710 5710 0.149
86 12 15E CC MO ND 5720 5720 0.105
86 13 15E CC MO 5745 5825 0.139
86 14 15E CC MO 5755 5795 0.135
86 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15C CC 2402 2480 0.007
88 2 15C CC MO 2412 2472 0.955
88 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15C CC 2402 2480 0.007
89 2 15C CC MO 2412 2472 0.955
89 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15E CC MO 5180 5240 0.145
90 2 15E CC MO 5190 5230 0.13
90 3 15E CC MO 5210 5210 0.095
90 4 15E CC MO 5250 5250 0.084
90 5 15E CC MO ND 5260 5320 0.145
90 6 15E CC MO ND 5270 5310 0.124
90 7 15E CC MO ND 5290 5290 0.086
90 8 15E CC MO ND 5500 5700 0.141
90 9 15E CC MO ND 5510 5670 0.138
90 1 15E CC MO ND 5530 5690 0.15
90 11 15E CC MO ND 5710 5710 0.149
90 12 15E CC MO ND 5720 5720 0.105
90 13 15E CC MO 5745 5825 0.139
90 14 15E CC MO 5755 5795 0.135
90 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15E CC MO 5180 5240 0.145
92 2 15E CC MO 5190 5230 0.13
92 3 15E CC MO 5210 5210 0.095
92 4 15E CC MO 5250 5250 0.084
92 5 15E CC MO ND 5260 5320 0.145
92 6 15E CC MO ND 5270 5310 0.124
92 7 15E CC MO ND 5290 5290 0.086
92 8 15E CC MO ND 5500 5700 0.141
92 9 15E CC MO ND 5510 5670 0.138
92 1 15E CC MO ND 5530 5690 0.15
92 11 15E CC MO ND 5710 5710 0.149
92 12 15E CC MO ND 5720 5720 0.105
92 13 15E CC MO 5745 5825 0.139
92 14 15E CC MO 5755 5795 0.135
92 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15C CC 2402 2480 0.007
93 2 15C CC MO 2412 2472 0.955
93 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15E CC MO 5180 5240 0.145
95 2 15E CC MO 5190 5230 0.13
95 3 15E CC MO 5210 5210 0.095
95 4 15E CC MO 5250 5250 0.084
95 5 15E CC MO ND 5260 5320 0.145
95 6 15E CC MO ND 5270 5310 0.124
95 7 15E CC MO ND 5290 5290 0.086
95 8 15E CC MO ND 5500 5700 0.141
95 9 15E CC MO ND 5510 5670 0.138
95 1 15E CC MO ND 5530 5690 0.15
95 11 15E CC MO ND 5710 5710 0.149
95 12 15E CC MO ND 5720 5720 0.105
95 13 15E CC MO 5745 5825 0.139
95 14 15E CC MO 5755 5795 0.135
95 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15C CC 2402 2480 0.007
97 2 15C CC MO 2412 2472 0.955
97 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC MO 5180 5240 0.145
98 2 15E CC MO 5190 5230 0.13
98 3 15E CC MO 5210 5210 0.095
98 4 15E CC MO 5250 5250 0.084
98 5 15E CC MO ND 5260 5320 0.145
98 6 15E CC MO ND 5270 5310 0.124
98 7 15E CC MO ND 5290 5290 0.086
98 8 15E CC MO ND 5500 5700 0.141
98 9 15E CC MO ND 5510 5670 0.138
98 1 15E CC MO ND 5530 5690 0.15
98 11 15E CC MO ND 5710 5710 0.149
98 12 15E CC MO ND 5720 5720 0.105
98 13 15E CC MO 5745 5825 0.139
98 14 15E CC MO 5755 5795 0.135
98 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15C CC 2402 2480 0.007
100 2 15C CC MO 2412 2472 0.955
100 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2402 2480 0.007
102 2 15C CC MO 2412 2472 0.955
102 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15E CC MO 5180 5240 0.145
103 2 15E CC MO 5190 5230 0.13
103 3 15E CC MO 5210 5210 0.095
103 4 15E CC MO 5250 5250 0.084
103 5 15E CC MO ND 5260 5320 0.145
103 6 15E CC MO ND 5270 5310 0.124
103 7 15E CC MO ND 5290 5290 0.086
103 8 15E CC MO ND 5500 5700 0.141
103 9 15E CC MO ND 5510 5670 0.138
103 1 15E CC MO ND 5530 5690 0.15
103 11 15E CC MO ND 5710 5710 0.149
103 12 15E CC MO ND 5720 5720 0.105
103 13 15E CC MO 5745 5825 0.139
103 14 15E CC MO 5755 5795 0.135
103 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15C CC 2402.00000000 2480.00000000 0.0100000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC