submitted / available | |||||||
---|---|---|---|---|---|---|---|
Intel WiFi Adapter Information Guide 20240216 | Users Manual | 2.75 MiB | March 07 2024 / March 12 2024 | ||||
|
TempConfidential AX211NGW- User Manual | Users Manual | 3.24 MiB | March 02 2023 / August 30 2023 | delayed release | ||
Users Manual | June 12 2023 / June 13 2023 | ||||||
|
EUT Photo AX211NGW | Internal Photos | 110.32 KiB | March 07 2024 / March 12 2024 | |||
|
TempConfidential AX211NGW- IntPho | Internal Photos | 2.06 MiB | March 02 2023 / August 30 2023 | delayed release | ||
Internal Photos | June 12 2023 / June 13 2023 | ||||||
|
TempConfidential AX211NGW- ExtPho | External Photos | 1019.51 KiB | March 02 2023 / August 30 2023 | delayed release | ||
External Photos | June 12 2023 / June 13 2023 | ||||||
ID Label/Location Info | March 02 2023 / March 03 2023 | ||||||
|
Label | ID Label/Location Info | 248.71 KiB | March 05 2024 / March 06 2024 | |||
Label Location AX211NGW | ID Label/Location Info | 74.32 KiB | March 07 2024 / March 12 2024 | ||||
|
Label Sample, Label Location | ID Label/Location Info | 494.43 KiB | June 12 2023 / June 13 2023 | |||
Label AX211NGW | ID Label/Location Info | 141.73 KiB | March 07 2024 / March 12 2024 | ||||
|
label info BR series AX211NGW | ID Label/Location Info | 212.50 KiB | January 10 2024 / January 11 2024 | |||
|
200611-01.TR09 - FCC-ISED, WLAN LOW SKU, AX211NGW | RF Exposure Info | 4.14 MiB | March 07 2024 / March 12 2024 | |||
|
200611-01.TR09 - FCC-ISED, WLAN LOW SKU, AX211NGW, Annex F | Test Setup Photos | 664.55 KiB | March 07 2024 / March 12 2024 | |||
ASUS Authorization letter AX211NGW 20-Dec-2023 | Cover Letter(s) | 95.82 KiB | March 07 2024 / March 12 2024 | ||||
AX211NGW- Declaration of authorization ASUS s | Cover Letter(s) | 92.16 KiB | March 07 2024 / March 12 2024 | ||||
AX211NGW-FCC Covered List Attestation Letter s | Attestation Statements | 143.37 KiB | March 07 2024 / March 12 2024 | ||||
AX211NGW-FCC U.S. Agent Designation Attestation Letter s | Attestation Statements | 236.01 KiB | March 07 2024 / March 12 2024 | ||||
AX211NGW C2PC letter ASUS 20240216 signed | Cover Letter(s) | 187.04 KiB | March 07 2024 / March 12 2024 | ||||
|
210923-01.TR01- FCC, WLAN - SAR PD - WiFi 6E-Low Sku, AX211NGW | RF Exposure Info | 2.75 MiB | March 07 2024 / March 12 2024 | |||
|
210923-01.TR01- FCC, WLAN - SAR PD - WiFi 6E-Low Sku, AX211NGW, Certificates | RF Exposure Info | 3.20 MiB | March 07 2024 / March 12 2024 | |||
|
210923-01.TR01- FCC, WLAN - SAR PD - WiFi 6E-Low Sku, AX211NGW, Photographs | Test Setup Photos | 599.85 KiB | March 07 2024 / March 12 2024 | |||
|
220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku | RF Exposure Info | 1.00 MiB | March 07 2024 / March 12 2024 | |||
|
220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku Annex E | RF Exposure Info | 2.69 MiB | March 07 2024 / March 12 2024 | |||
|
220915-01.TR01-FCC SAR WLAN AX211NGW Low Sku Annex F | Test Setup Photos | 536.09 KiB | March 07 2024 / March 12 2024 | |||
|
Attestation Statements Part2.911(d)(5) | Attestation Statements | 216.92 KiB | March 05 2024 / March 06 2024 | |||
|
Attestation Statements Part2.911(d)(7) | Attestation Statements | 289.02 KiB | March 05 2024 / March 06 2024 | |||
|
B3402FBA AntennaDatasheet NB | Test Report | 561.89 KiB | March 05 2024 / March 06 2024 | |||
|
B3402FBA AntennaDatasheet PAD | Test Report | 572.85 KiB | March 05 2024 / March 06 2024 | |||
|
B3402FVA NB Datasheet | Test Report | 625.85 KiB | March 05 2024 / March 06 2024 | |||
|
B3402FVA PAD Datasheet | Test Report | 945.07 KiB | March 05 2024 / March 06 2024 | |||
|
C2PC letter | Cover Letter(s) | 221.31 KiB | March 05 2024 / March 06 2024 | |||
|
Confidentiality Request Letter | Cover Letter(s) | 218.33 KiB | March 05 2024 / March 06 2024 | |||
|
Models Difference DescriptionLetter | Cover Letter(s) | 215.45 KiB | March 05 2024 / March 06 2024 | |||
|
Power of Attorney Letter | Cover Letter(s) | 226.39 KiB | March 05 2024 / March 06 2024 | |||
|
USSC23D323001 SAR | RF Exposure Info | 1.23 MiB | March 05 2024 / March 06 2024 | |||
|
USSC23D323001 SAR AppendixA | RF Exposure Info | 520.78 KiB | March 05 2024 / March 06 2024 | |||
|
USSC23D323001 SAR AppendixB | RF Exposure Info | 152.46 KiB | March 05 2024 / March 06 2024 | |||
|
USSC23D323001 SAR AppendixC | RF Exposure Info | 183.45 KiB | March 05 2024 / March 06 2024 | |||
|
USSC23D323001 SAR AppendixD | RF Exposure Info | 4.86 MiB | March 05 2024 / March 06 2024 | |||
|
ASUS BR1204 Antenna Datasheet INNOWAVE NB mode | Test Report | 527.71 KiB | January 10 2024 / January 11 2024 | |||
|
ASUS BR1204 Antenna Datasheet INNOWAVE PAD mode | Test Report | 371.08 KiB | January 10 2024 / January 11 2024 | |||
|
ASUS BR1204 Antenna Datasheet INPAQ NB mode | Test Report | 633.41 KiB | January 10 2024 / January 11 2024 | |||
|
ASUS BR1204 Antenna Datasheet INPAQ PAD mode | Test Report | 557.90 KiB | January 10 2024 / January 11 2024 | |||
Confidential ASUS BR1204 Antenna Design INNOWAVE LTC NB mode | Operational Description | January 10 2024 | confidential | ||||
Confidential ASUS BR1204 Antenna Design INNOWAVE LTC PAD mode | Operational Description | January 10 2024 | confidential | ||||
Confidential ASUS BR1204 Antenna Design INPAQ LTC NB mode | Operational Description | January 10 2024 | confidential | ||||
Confidential ASUS BR1204 Antenna Design INPAQ LTC PAD mode | Operational Description | January 10 2024 | confidential | ||||
Confidential BR1204 BR1104 SAR Power G sensor mechanism 230914 | Operational Description | January 10 2024 | confidential | ||||
|
ACB-FORM-FCC-Application-Letters-Agency-Letter signed | Cover Letter(s) | 185.66 KiB | January 10 2024 / January 11 2024 | |||
|
C2PC letter signed1226 | Cover Letter(s) | 282.42 KiB | January 10 2024 / January 11 2024 | |||
|
FCC Attestation Letter US AGENT non-US-applicant signed | Attestation Statements | 308.81 KiB | January 10 2024 / January 11 2024 | |||
|
Models Difference Description Letter signed | Cover Letter(s) | 193.32 KiB | January 10 2024 / January 11 2024 | |||
TempConfidential ASUS BR1204 Antenna Photos INNOWAVE STC NB mode | Internal Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential ASUS BR1204 Antenna Photos INNOWAVE STC PAD mode | Internal Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential ASUS BR1204 Antenna Photos INPAQ STC NB mode | Internal Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential ASUS BR1204 Antenna Photos INPAQ STC PAD mode | Internal Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential C23O166 EUT External Photos FCC IC | External Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential C23O166 EUT Internal Photos FCC IC 1220 | Internal Photos | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential E22889 BR1104 BR1204CGA FGA EM draft1 | Users Manual | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential E22890 BR1104 BR1204CGA FGA UM 28pages draft1 | Users Manual | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential Q22891 BR1104 BR1204CGA FGA QSG draft1 | Users Manual | January 10 2024 / July 09 2024 | delayed release | ||||
TempConfidential USSC23O166001 Intel AX211NGW Appendix E Test Setup Photographs | Test Setup Photos | January 10 2024 / July 09 2024 | delayed release | ||||
|
USSC23O166001-01 Intel AX211NGW Appendix A Conducted Power Measurements | RF Exposure Info | 680.50 KiB | January 10 2024 / January 11 2024 | |||
|
USSC23O166001-01 Intel AX211NGW Appendix B System Performance Check Plots | RF Exposure Info | 818.89 KiB | January 10 2024 / January 11 2024 | |||
|
USSC23O166001-01 Intel AX211NGW Appendix C Highest Measurement Plots | RF Exposure Info | 521.04 KiB | January 10 2024 / January 11 2024 | |||
|
USSC23O166001-01 Intel AX211NGW Appendix D Calibration Certificates-01 | RF Exposure Info | 3.29 MiB | January 10 2024 / January 11 2024 | |||
|
USSC23O166001-01 Intel AX211NGW Appendix D Calibration Certificates-02 | RF Exposure Info | 4.06 MiB | January 10 2024 / January 11 2024 | |||
|
USSC23O166001-01 Intel AX211NGW FCC SAR | RF Exposure Info | 1.86 MiB | January 10 2024 / January 11 2024 | |||
TempConfidential C23O166 EUT Internal Photos FCC IC 1220 | External Photos | January 10 2024 / July 09 2024 | delayed release | ||||
|
Confidentiality Request signed | Cover Letter(s) | 220.44 KiB | January 10 2024 / January 11 2024 | |||
Test Report | January 10 2024 / January 11 2024 | ||||||
|
FCC-Confidentiality Request-Short term rev | Cover Letter(s) | 154.99 KiB | June 12 2023 / June 13 2023 | |||
|
FCC-Cover Letter Description of Change rev 3 | Cover Letter(s) | 23.18 KiB | June 12 2023 / June 13 2023 | |||
|
FCC-Cover Letter-Agent Authorization | Cover Letter(s) | 172.73 KiB | June 13 2023 | |||
|
FCC-Cover Letter-Statements of part 2.911d5 | Attestation Statements | 151.04 KiB | June 12 2023 / June 13 2023 | |||
Attestation Statements | June 12 2023 / June 13 2023 | ||||||
|
FCC-RF Exposure Info-SAR rev | RF Exposure Info | 1.92 MiB | June 12 2023 / June 13 2023 | |||
|
FCC-RF Exposure Info-SAR-rev. Appendix A-K rev | RF Exposure Info | 4.42 MiB | June 12 2023 / June 13 2023 | |||
|
FCC-RF Exposure Info-SAR-rev. Appendix Z | RF Exposure Info | 2.32 MiB | June 12 2023 / June 13 2023 | |||
|
FCC-Test Set Up Photos-SAR rev | Test Setup Photos | 1.75 MiB | June 12 2023 / December 10 2023 | delayed release | ||
|
Form ACB-FORM-FCC-Application-Letters-Confidentiality-Letter ver02 | Cover Letter(s) | 161.03 KiB | April 11 2023 / April 12 2023 | |||
|
Form ASUS FCC Covered List Attestation Letter ver01 | Attestation Statements | 131.80 KiB | April 11 2023 / April 12 2023 | |||
|
Form ASUS FCC U.S. Agent Designation Attestation Letter ver01 | Cover Letter(s) | 225.07 KiB | April 11 2023 / April 12 2023 | |||
|
Form FCC Class II permissive change letter ver02 | Cover Letter(s) | 97.47 KiB | April 11 2023 / April 12 2023 | |||
|
Form FCC agent auth letter ver01 | Cover Letter(s) | 93.51 KiB | April 11 2023 / April 12 2023 | |||
|
Submit-FCC Rep A ASUS B5402FBA SAR TESA2302000095EN 20230309 | Test Setup Photos | 753.54 KiB | April 11 2023 / October 09 2023 | delayed release | ||
|
Submit-FCC Rep B ASUS B5402FBA SAR TESA2302000095EN 20230309 | RF Exposure Info | 3.81 MiB | April 11 2023 / April 12 2023 | |||
|
Submit-FCC Rep C ASUS B5402FBA SAR TESA2302000095EN 20230309 | RF Exposure Info | 2.96 MiB | April 11 2023 / April 12 2023 | |||
|
Submit-FCC Rep ASUS B5402FBA SAR TESA2302000095EN 20230323 | RF Exposure Info | 3.88 MiB | April 11 2023 / April 12 2023 | |||
Attestation Statements | March 03 2023 | ||||||
Attestation Statements | March 03 2023 | ||||||
Test Report | March 03 2023 | ||||||
Test Report | March 03 2023 | ||||||
Test Report | March 03 2023 | ||||||
Test Report | March 03 2023 | ||||||
RF Exposure Info | March 02 2023 / March 03 2023 | ||||||
RF Exposure Info | March 02 2023 / March 03 2023 | ||||||
|
TempConfidential AX211NGW- Tsup-SAR | Test Setup Photos | 306.53 KiB | March 02 2023 / August 30 2023 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2024-03-12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
3 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
4 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2024-03-06 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
6 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
7 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
8 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
9 | 2024-01-11 | 2422 ~ 2462 | DTS - Digital Transmission System | |
10 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
12 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
13 | 2023-06-13 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
14 | 2023-04-12 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
15 | 2023-03-03 | 2422 ~ 2462 | DTS - Digital Transmission System | |
16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
17 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
18 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
19 | 2023-02-16 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
20 | 2023-01-30 | 2422 ~ 2462 | DTS - Digital Transmission System | |
21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
22 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
23 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
24 | 2023-01-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
25 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
26 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
27 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
28 | 2023-01-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
29 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
30 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
31 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
32 | 2022-12-05 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
33 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
34 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
35 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
36 | 2022-11-30 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
37 | 2022-10-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
38 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
39 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
40 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
41 | 2022-09-01 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
42 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
43 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
44 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
45 | 2022-07-03 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
46 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
47 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
48 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
49 | 2022-06-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
50 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
51 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
52 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
53 | 2022-06-22 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
54 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
55 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
56 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
57 | 2022-04-14 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
58 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
59 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
60 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
61 | 2022-03-21 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
62 | 2022-03-10 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
63 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
64 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | ||
65 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
66 | 2022-02-14 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | |
67 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
68 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
69 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
70 | 2021-08-27 | 6025 ~ 6985 | 6XD - 15E 6 GHz Low Power Indoor Client | Change in Identification |
71 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
72 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
73 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
74 | JBP - Part 15 Class B Computing Device Peripheral |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2024-03-12
|
|||||
2024-03-06
|
||||||
2024-01-11
|
||||||
2023-06-13
|
||||||
2023-04-12
|
||||||
2023-03-03
|
||||||
2023-02-16
|
||||||
2023-01-30
|
||||||
2023-01-17
|
||||||
2023-01-04
|
||||||
2022-12-05
|
||||||
2022-11-30
|
||||||
2022-10-06
|
||||||
2022-09-01
|
||||||
2022-07-03
|
||||||
2022-06-29
|
||||||
2022-06-22
|
||||||
2022-04-14
|
||||||
2022-03-21
|
||||||
2022-03-10
|
||||||
2022-02-14
|
||||||
2021-08-27
|
||||||
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
|||||
FCC Registration Number (FRN) |
0005821988
|
|||||
Physical Address |
1F, No. 15, Lide Rd.
|
|||||
Beitou, Taipei, N/A
|
||||||
Beitou, Taipei, N/A 112
|
||||||
Taiwan
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
b******@phoenix-testlab.de
|
||||||
v******@nemko.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
MSQ
|
|||||
Equipment Product Code |
AX211NG
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
J******** Y******
|
|||||
Title |
Associate Vice President
|
|||||
Telephone Number |
+886-********
|
|||||
Fax Number |
+886-********
|
|||||
j******@asus.com
|
||||||
Technical Contact | ||||||
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
|||||
Eurofins E&E Wireless Taiwan Co., Ltd.
|
||||||
Bureau Veritas Consumer Products Services (H.K.)
|
||||||
SGS
|
||||||
SGS Taiwan Ltd.
|
||||||
sgs
|
||||||
A Test Lab Techno Corp
|
||||||
Name |
C****** P********
|
|||||
F****** L******
|
||||||
K**** L******
|
||||||
Y****** K********
|
||||||
J****** W******
|
||||||
W**** H****
|
||||||
J******** C********
|
||||||
F******** Y******
|
||||||
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
|||||
No. 140-1, Changan Street, Bade District
|
||||||
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil. Kwei Shan Dist
|
||||||
No. 85, Wenlin St., Linkou Dist.
|
||||||
No. 134, Wu Kung Rd., New Taipei Industrial Park
|
||||||
New Taipei City
|
||||||
Taoyuan
|
||||||
Taoyuan City
|
||||||
New Taipei City, 24451
|
||||||
Taiwan
|
||||||
Telephone Number |
886-2********
|
|||||
886-3******** Extension:
|
||||||
886 3********
|
||||||
886-2********
|
||||||
886-2******** Extension:
|
||||||
886 2********
|
||||||
886-3********
|
||||||
Fax Number |
886 2********
|
|||||
886-2********
|
||||||
c******@dekra.com
|
||||||
F******@cpt.eurofinsasia.com
|
||||||
k******@bureauveritas.com
|
||||||
y******@sgs.com
|
||||||
j******@dekra.com
|
||||||
c******@dekra.com
|
||||||
w******@sgs.com
|
||||||
y******@sgs.com
|
||||||
j******@sgs.com
|
||||||
f******@dekra.com
|
||||||
f******@atl-lab.com.tw
|
||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
Yes | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
Yes | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/02/2024 | |||||
07/09/2024 | ||||||
12/10/2023 | ||||||
10/09/2023 | ||||||
08/30/2023 | ||||||
08/16/2023 | ||||||
07/19/2023 | ||||||
07/04/2023 | ||||||
05/23/2023 | ||||||
04/04/2023 | ||||||
02/28/2023 | ||||||
12/31/2022 | ||||||
12/26/2022 | ||||||
12/20/2022 | ||||||
10/11/2022 | ||||||
09/06/2022 | ||||||
08/11/2022 | ||||||
10/26/2021 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | |||||
DTS - Digital Transmission System | ||||||
6XD - 15E 6 GHz Low Power Indoor Client | ||||||
NII - Unlicensed National Information Infrastructure TX | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX211 | |||||
Intel Wi-Fi 6E AX211 (BT/WiFi) | ||||||
2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | |||||
No | ||||||
Modular Equipment Type | Single Modular Approval | |||||
Does not apply | ||||||
Limited Single Modular Approval | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Change in Identification | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance. | |||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 0.68 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 5mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value less than0.8W/kg for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.42 W/kg respectively. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.42 W/kg and 0.95 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUS NotebookPC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antennaINPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002 (HQ26003000230)and antenna INNOWAVE, part no. F001C8711590001, F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.14 W/kg respectively. | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP forUNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUS NotebookPC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antenna INPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002 (HQ26003000230) and antenna INNOWAVE, part no. F001C8711590001, F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.03 W/kg and 1.03 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUSNotebookPC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antenna INPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002(HQ26003000230) and antenna INNOWAVE, part no. F001C8711590001,F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.14 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUSNotebookPC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antenna INPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002(HQ26003000230) and antenna INNOWAVE, part no. F001C8711590001,F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.45 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.59 W/kg respectively.   | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing enables UNII-5.9GHz Band and establishes portable category for ASUS platform with models: B5402CB and B5402CBA (those models are for laptop); as well as the models: B5402FB and B5402FBA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.97 W/kg and 1.53 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models TP3604V, R3604V and J3604V with the antenna INPAQ, part no. WA-P-LE-02-113, WA-P-LE-03-010 and antenna Innowave, part no. F00192307110001 (HQ2060508L000), F00192307510002 (HQ2060508K000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models TP3604V, R3604V and J3604V with the antenna INPAQ, part no. WA-P-LE-02-113, WA-P-LE-03-010 and antenna Innowave, part no. F00192307110001 (HQ2060508L000), F00192307510002 (HQ2060508K000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models TP3604V, R3604V and J3604V with the antenna INPAQ, part no. WA-P-LE-02-113, WA-P-LE-03-010 and antenna Innowave, part no. F00192307110001 (HQ2060508L000), F00192307510002 (HQ2060508K000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models TP3604V, R3604V and J3604V with the antenna INPAQ, part no. WA-P-LE-02-113, WA-P-LE-03-010 and antenna Innowave, part no. F00192307110001 (HQ2060508L000), F00192307510002 (HQ2060508K000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.34 W/kg respectively. | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: GV601V, GV601VI, GV601VV,GV601VU,GV601VJ.; Brand: ASUS, with antenna AWAN, model no.: 14008-04990100 and 14008-04990000. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.15 W/kg and 1.58 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P- LE-03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body- worn and simultaneous transmission use conditions are 0.76 W/kg and 1.11 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE- 03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.35 W/kg and 1.17 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P- LE-03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body- worn and simultaneous transmission use conditions are 0.61 W/kg and 0.96 W/kg at 1g tissues, respectively. The highest reported power density is 0.72 mW/cm2 | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402V, J3402V R3402V, P3402FV.; Brand: ASUS, with antenna INPAQ, model no.: WA-P- LE-03-003 and WA-P-LE-02-071; antenna INNOWAVE, model no.: F00168007510002 and F00168007110001. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body- worn and simultaneous transmission use conditions are 0.78 W/kg and 1.17 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS notebook computer, model number: UP3404V, RP3404V and BP3404V with the antenna INPAQ, part no. MDA-LELE-04-002 (HQ206050A1000) and antenna Innowave, part no. F00193102110001 (HQ20605094000). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.24 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS notebook computer, model number: UP3404V, RP3404V and BP3404V with the antenna INPAQ, part no. MDA-LELE-04-002 (HQ206050A1000) and antenna Innowave, part no. F00193102110001 (HQ20605094000). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.44 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS notebook computer, model number: UP3404V, RP3404V and BP3404V with the antenna INPAQ, part no. MDA-LELE-04-002 (HQ206050A1000) and antenna Innowave, part no. F00193102110001 (HQ20605094000). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.24 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: H7604J, W7604J, J7604J.; Brand: ASUS, with antenna INPAQ, model no.: WA-F-LE-01-004 and WA-F-LE-02-035. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.14 W/kg and 1.20 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: H7604J, W7604J, J7604J.; Brand: ASUS, with antenna INPAQ, model no.: WA-F-LE-01-004 and WA-F-LE-02-035. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.07 W/kg and 1.14 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: H7604J, W7604J, J7604J.; Brand: ASUS, with antenna INPAQ, model no.: WA-F-LE-01-004 and WA-F-LE-02-035. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.06 W/kg and 1.20 W/kg at 1g tissues, respectively. The highest reported power density is 0.62 mW/cm2 | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.<br> This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: H7604J, W7604J, J7604J.; Brand: ASUS, with antenna INPAQ, model no.: WA-F-LE-01-004 and WA-F-LE-02-035. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.91 W/kg and 1.05 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: GV601V, GV601VI, GV601VV,GV601VU,GV601VJ.; Brand: ASUS, with antenna AWAN, model no.: 14008-04990100 and 14008-04990000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.35 W/kg and 1.51 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: GV601V, GV601VI, GV601VV,GV601VU,GV601VJ.; Brand: ASUS, with antenna AWAN, model no.: 14008-04990100 and 14008-04990000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.14 W/kg and 1.54 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: GV601V, GV601VI, GV601VV,GV601VU,GV601VJ.; Brand: ASUS, with antenna AWAN, model no.: 14008-04990100 and 14008-04990000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.06 W/kg and 1.48 W/kg at 1g tissues, respectively. The highest reported power density is 0.72 mW/cm2 | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: GV601V, GV601VI, GV601VV,GV601VU,GV601VJ.; Brand: ASUS, with antenna AWAN, model no.: 14008-04990100 and 14008-04990000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body- worn and simultaneous transmission use conditions are 1.15 W/kg and 1.58 W/kg at 1g tissues, respectively. | ||||||
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models CX3401FB, CB3401FB, CX3401FBA, CB3401FBA, CX3401F and CB3401F with the antenna South-Star, part no. DC33002R400(3.N201.0213), DC33002R410(3.N201.0214) and antenna Pulse, part no. DC33002R300(TZ2379D), DC33002R310(TZ2379E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.58 W/kg and 1.46 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models CX3401FB, CB3401FB, CX3401FBA, CB3401FBA, CX3401F and CB3401F with the antenna South-Star, part no. DC33002R400(3.N201.0213), DC33002R410(3.N201.0214) and antenna Pulse, part no. DC33002R300(TZ2379D), DC33002R310(TZ2379E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.46 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models CX3401FB, CB3401FB, CX3401FBA, CB3401FBA, CX3401F and CB3401F with the antenna South-Star, part no. DC33002R400(3.N201.0213), DC33002R410(3.N201.0214) and antenna Pulse, part no. DC33002R300(TZ2379D), DC33002R310(TZ2379E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.46 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models CX3401FB, CB3401FB, CX3401FBA, CB3401FBA, CX3401F and CB3401F with the antenna South-Star, part no. DC33002R400(3.N201.0213), DC33002R410(3.N201.0214) and antenna Pulse, part no. DC33002R300(TZ2379D), DC33002R310(TZ2379E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.46 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.59 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. <br><br>Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B6602FC, B6602F, B6602FC2, B6602FCE.; Brand: ASUS, with antenna AWAN, model no.: AYF6Y-100198 and AYF6Y- 100199. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.55 W/kg and 1.13 W/kg at 1g tissues, respectively. The highest reported power density is 0.93 mW/cm2. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br><br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B6602FC, B6602F, B6602FC2, B6602FCE.; Brand: ASUS, with antenna AWAN, model no.: AYF6Y-100198 and AYF6Y-100199. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.60 W/kg and 1.14 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br><br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B6602FC, B6602F, B6602FC2, B6602FCE.; Brand: ASUS, with antenna AWAN, model no.: AYF6Y-100198 and AYF6Y- 100199. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.74 W/kg and 1.38 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br><br>Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B6602FC, B6602F, B6602FC2, B6602FCE.; Brand: ASUS, with antenna AWAN, model no.: AYF6Y-100198 and AYF6Y-100199. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.16 W/kg and 1.38 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (those models are for laptop); as well as the models: B5402FB and B5402FBA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.54 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi- transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (those models are for laptop); as well as the models: B5402FB and B5402FBA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.91 W/kg and 0.62 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (those models are for laptop); as well as the models: B5402FB and B5402FBA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.97 W/kg and 1.53 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Update the Contention Based Protocol test with the lower antenna gain as documented in the filing (03/21/2022). This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (those models are for laptop); as well as the models: B5402FB and B5402FBA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.54 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Notebook PC, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.28 W/kg and 0.53 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Notebook PC, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.48 W/kg and 0.95 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Notebook PC, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.30 W/kg and 0.64 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Notebook PC, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.64 W/kg, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80and160 MHz BW modes. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS CX5601FB with the antenna Southstar Technology, part no. DC33002PD00(N12-8153- R0A) and DC33002PD10(N12-8154-R0A). The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.57 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS CX5601FB with the antenna Southstar Technology, part no. DC33002PD00(N12-8153- R0A) and DC33002PD10(N12-8154-R0A). The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.57 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS CX5601FB with the antenna Southstar Technology, part no. DC33002PD00(N12-8153- R0A) and DC33002PD10(N12-8154-R0A). The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.57 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS CX5601FB with the antenna Southstar Technology, part no. DC33002PD00(N12-8153- R0A) and DC33002PD10(N12-8154-R0A). The highest reported Body and Simultaneous SAR values are 0.38 W/kg and 1.57 W/kg respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Update the Contention Based Protocol test with the lower antenna gain as documented in the filing. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UP5401Z, RP5401Z.; Brand: ASUS, with antenna LUXSHAREICT, model no.: 14008-04210200 and 14008-04210300. SAR compliance for bodycarry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.26 W/kg and 1.48 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) use dfor this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UP5401Z, RP5401Z.; Brand: ASUS, with antenna AWAN, model no.: 14008-04660300 and 14008-04660200. And antenna INPAQ, model no.: 14008-04660000 and 14008-04660100. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.42 W/kg and 0.76 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UP5401Z, RP5401Z.; Brand: ASUS, with antenna AWAN, model no.: 14008-04660300 and 14008-04660200. And antenna INPAQ, model no.: 14008-04660000 and 14008-04660100. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.88 W/kg and 1.48 W/kg at 1g tissues, respectively. The highest reported power density is 0.39 mW/cm2 | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UP5401Z, RP5401Z.; Brand: ASUS, with antenna AWAN, model no.: 14008-04660300 and 14008-04660200. And antenna INPAQ, model no.: 14008-04660000 and 14008-04660100. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.16 W/kg and 1.58 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW.; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: 14008-04210200 and 14008-04210300. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.60 W/kg and 1.41 W/kg at 1g tissues, respectively. The highest reported power density is 0.30 mW/cm2 | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Deviceis a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW.; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: 14008-04210200 and 14008-04210300. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.93 W/kg and 1.25 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW.; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: 14008-04210200 and 14008-04210300. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.32 W/kg and 1.41 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW.; Brand: ASUS, with antenna LUXSHARE-ICT, model no.: 14008-04210200 and 14008- 04210300. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.05 W/kg and 1.57 W/kg at 1g tissues, respectively. | ||||||
Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Deviceis a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Intel Corporation S.A.S.
|
|||||
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
||||||
Eurofins E&E Wireless Taiwan Co., Ltd.
|
||||||
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||||
SGS Taiwan Ltd. Central RF Lab
|
||||||
Eurofins E&E Wireless Taiwan Co., Ltd
|
||||||
Intel Corporation - Oregon CPRS Labs
|
||||||
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||||
A Test Lab Techno Corp.
|
||||||
SGS Taiwan Ltd. Electromagnetic Compatibility Lab
|
||||||
Name |
N****** A****
|
|||||
M****** L********
|
||||||
F****** L********
|
||||||
E****** L****
|
||||||
R******** W********
|
||||||
F**** B****
|
||||||
R******** C********
|
||||||
T****** W****
|
||||||
Telephone Number |
00334********
|
|||||
+886-********
|
||||||
88632******** Extension:
|
||||||
+886-********
|
||||||
+886-******** Extension:
|
||||||
+886-******** Extension:
|
||||||
886-3********
|
||||||
50361********
|
||||||
+886-********
|
||||||
88622******** Extension:
|
||||||
00334********
|
||||||
Fax Number |
+886-********
|
|||||
88632********
|
||||||
+886-********
|
||||||
+886-********
|
||||||
+886-********
|
||||||
886-3********
|
||||||
50369********
|
||||||
+886-********
|
||||||
+8863********
|
||||||
00334********
|
||||||
n******@intel.com
|
||||||
m******@dekra.com
|
||||||
F******@eurofins.com
|
||||||
e******@bureauveritas.com
|
||||||
r******@sgs.com
|
||||||
f******@atl-lab.com.tw
|
||||||
f******@intel.com
|
||||||
r******@bureauveritas.com
|
||||||
T******@sgs.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
4 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
4 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
4 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
4 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
4 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
4 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
4 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
4 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
4 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
5 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | CC MO | 5190 | 5320 | 0.182 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
6 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
6 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
6 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
6 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
6 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
6 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
6 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
6 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
6 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
6 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
6 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
6 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
6 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
9 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
9 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
10 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
10 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
10 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
10 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
10 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
10 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
10 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
10 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
10 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
10 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
10 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
13 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
13 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
13 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
13 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
13 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
13 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
13 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
13 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
13 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
13 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
13 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
13 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
13 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
13 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
13 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
13 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
13 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
13 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
14 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
14 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
14 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
14 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
14 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
14 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
14 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
14 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
14 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
14 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
14 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
14 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
14 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
14 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
14 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
17 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
18 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
18 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
18 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
18 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
18 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
18 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
18 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
18 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
18 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
18 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
18 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
18 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
18 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
18 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
18 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
19 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
19 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
19 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
19 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
19 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
19 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
19 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
19 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
19 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
19 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
19 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
19 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
19 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
19 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
19 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
19 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
19 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
19 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
22 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
22 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
22 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
23 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
23 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
23 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
23 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
23 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
23 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
23 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
23 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
23 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
23 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
23 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
23 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
23 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
23 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
23 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
23 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
27 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
27 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
27 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
27 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
27 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
27 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
27 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
27 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
27 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
27 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
27 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
27 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
29 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
29 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
31 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
31 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
31 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
31 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
31 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
31 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
31 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
31 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
31 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
31 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
31 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
31 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
31 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
31 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
31 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
31 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
31 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
31 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
33 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
33 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
34 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
35 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
35 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
35 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
35 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
35 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
35 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
35 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
35 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
35 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
35 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
35 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
35 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
35 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
35 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
35 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
36 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
36 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
36 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
36 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
36 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
36 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
36 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
36 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
36 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
36 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
36 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
36 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
36 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
36 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
36 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
36 | 16 | 15E | CC EP MO | 5845 | 5885 | 0.296 | |||||||||||||||||||||||||||||||||||
36 | 17 | 15E | CC EP MO | 5835 | 5875 | 0.64 | |||||||||||||||||||||||||||||||||||
36 | 18 | 15E | CC EP MO | 5855 | 5855 | 0.676 | |||||||||||||||||||||||||||||||||||
36 | 19 | 15E | CC EP MO | 5815 | 5815 | 0.272 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
37 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
38 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
38 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
38 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
39 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
39 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
39 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
39 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
39 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
39 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
39 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
39 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
39 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
39 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
39 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
39 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
39 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
40 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
40 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
40 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
40 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
41 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
41 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
41 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
41 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
41 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
41 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
41 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
41 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
41 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
41 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
41 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
41 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
41 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
41 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
41 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
42 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
43 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
43 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
43 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
43 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
44 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
44 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
44 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
45 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
45 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
45 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
45 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
46 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
46 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
46 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
47 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
47 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
47 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
47 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
47 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
47 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
47 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
47 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
47 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
47 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
47 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
47 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
47 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
47 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
47 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
48 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
49 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
50 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
50 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
50 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
51 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
51 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
51 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
51 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
51 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
51 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
51 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
51 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
51 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
51 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
51 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
51 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
51 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
51 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
51 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
52 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
52 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
52 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
52 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
53 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
53 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
53 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
53 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
54 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
54 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
54 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
55 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
55 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
55 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
55 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
55 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
55 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
55 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
55 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
55 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
55 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
55 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
55 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
55 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
55 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
55 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
56 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
57 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
57 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
57 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
57 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
58 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
58 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
58 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
59 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
59 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
59 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
59 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
59 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
59 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
59 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
59 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
59 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
59 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
59 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
59 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
59 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
59 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
59 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
60 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
61 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
61 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
61 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
61 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
62 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
63 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
63 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
63 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
64 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
64 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
64 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
64 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
65 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
65 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
65 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
65 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
65 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
65 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
65 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
65 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
65 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
65 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
65 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
65 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
65 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
65 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
65 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
66 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
66 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
66 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
66 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
67 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
67 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
67 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
67 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
67 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
67 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
67 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
67 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
67 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
67 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
67 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
67 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
67 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
67 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
67 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
68 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
69 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
69 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
69 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
70 | 1 | 15E | CC EP MO | 5955 | 7115 | 0.003 | |||||||||||||||||||||||||||||||||||
70 | 2 | 15E | CC EP MO | 5965 | 7085 | 0.007 | |||||||||||||||||||||||||||||||||||
70 | 3 | 15E | CC EP MO | 5985 | 7025 | 0.012 | |||||||||||||||||||||||||||||||||||
70 | 4 | 15E | CC EP MO | 6025 | 6985 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
71 | 1 | 15E | CC MO | 5180 | 5240 | 0.152 | |||||||||||||||||||||||||||||||||||
71 | 2 | 15E | CC MO | 5190 | 5230 | 0.182 | |||||||||||||||||||||||||||||||||||
71 | 3 | 15E | CC MO | 5210 | 5210 | 0.093 | |||||||||||||||||||||||||||||||||||
71 | 4 | 15E | CC MO | 5250 | 5250 | 0.064 | |||||||||||||||||||||||||||||||||||
71 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.152 | |||||||||||||||||||||||||||||||||||
71 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.194 | |||||||||||||||||||||||||||||||||||
71 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.088 | |||||||||||||||||||||||||||||||||||
71 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.154 | |||||||||||||||||||||||||||||||||||
71 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.249 | |||||||||||||||||||||||||||||||||||
71 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.122 | |||||||||||||||||||||||||||||||||||
71 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.104 | |||||||||||||||||||||||||||||||||||
71 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.215 | |||||||||||||||||||||||||||||||||||
71 | 13 | 15E | CC MO | 5745 | 5825 | 0.254 | |||||||||||||||||||||||||||||||||||
71 | 14 | 15E | CC MO | 5755 | 5795 | 0.257 | |||||||||||||||||||||||||||||||||||
71 | 15 | 15E | CC MO | 5775 | 5775 | 0.212 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
72 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0110000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
73 | 1 | 15C | CC | 2402 | 2480 | 0.009 | |||||||||||||||||||||||||||||||||||
73 | 2 | 15C | CC MO | 2412 | 2472 | 0.979 | |||||||||||||||||||||||||||||||||||
73 | 3 | 15C | CC MO | 2422 | 2462 | 0.836 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
74 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC