FCC ID: MSQAX200D2L Intel Wireless-AX200

by: ASUSTeK Computer Inc latest update: 2021-09-28 model: AX200D2L

Thirty One grants have been issued under this FCC ID from 05/09/2019 to 09/28/2021 (this is one of two hundred and eleven releases in 2021 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked password defaults, instructions, drivers, warrantee terms, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various AX200D2WL- UserMan Users Manual pdf 829.71 KiB January 18 2021 / January 27 2021
various AX200D2WL- UserMan-1128 Users Manual pdf 1.58 MiB November 28 2019
various TempConfidential AX200D2WL- UserMan Users Manual pdf 3.36 MiB August 12 2020 / February 21 2021 delayed release
various TempConfidential AX200D2WL- UserMan Part1 Users Manual pdf 4.38 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- UserMan Part2 Users Manual pdf 4.93 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- UserMan Part3 Users Manual pdf 1.21 MiB September 16 2021 / March 28 2022 delayed release
various AX200D2WL- Inpho SAR Internal Photos pdf 4.37 MiB November 28 2019
various Internal Photos pdf January 18 2021 / January 27 2021
various Internal Photos pdf January 18 2021 / January 27 2021
various Internal Photos pdf January 18 2021 / January 27 2021
various Confidential AX200D2WL- Inpho-SAR Part1 Internal Photos pdf 4.95 MiB January 18 2021 / January 27 2021
various Confidential AX200D2WL- Inpho-SAR Part2 Internal Photos pdf 4.71 MiB January 18 2021 / January 27 2021
various Confidential AX200D2WL- Inpho-SAR Part3 Internal Photos pdf 3.66 MiB January 18 2021 / January 27 2021
various Internal Photos Internal Photos pdf 4.79 MiB January 04 2021 / February 28 2021 delayed release
various TempConfidential AX200D2WL- Inpho Internal Photos pdf 4.53 MiB May 11 2021 / November 08 2021 delayed release
various TempConfidential AX200D2WL- Inpho-SAR Internal Photos pdf 4.99 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- Inpho SAR Internal Photos pdf 3.94 MiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- Expho-SAR External Photos pdf 916.99 KiB January 18 2021 / January 27 2021
various AX200D2WL- Expho SAR External Photos pdf 212.80 KiB November 28 2019
various External Photos External Photos pdf 1011.03 KiB January 04 2021 / February 28 2021 delayed release
various TempConfidential AX200D2WL- Expho External Photos pdf 1.35 MiB May 11 2021 / November 08 2021 delayed release
various External Photos pdf May 08 2019 / November 05 2019
various TempConfidential AX200D2WL- Expho-SAR External Photos pdf 525.48 KiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- Expho SAR External Photos pdf 521.05 KiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- ISED Label ID Label/Location Info pdf 184.90 KiB March 31 2020
various AX200D2WL- LabelLoc ID Label/Location Info pdf 208.90 KiB September 16 2021 / September 28 2021
various AX200D2WL- LabelLoc-20190506 ID Label/Location Info pdf 81.31 KiB August 05 2019 / September 05 2019
various AX200D2WL- LabelLoc 20200813 ID Label/Location Info pdf 104.20 KiB August 12 2020 / August 24 2020
various AX200D2WL- Labelsmpl ID Label/Location Info pdf 242.92 KiB September 16 2021 / September 28 2021
various AX200D2WL- Class II Change-20210917 Cover Letter(s) pdf 155.47 KiB September 22 2021 / September 28 2021
various AX200D2WL- Confidentiality Request Cover Letter(s) pdf 147.77 KiB September 16 2021 / September 28 2021
various AX200D2WL- Declaration of authorization Cover Letter(s) pdf 139.63 KiB September 16 2021 / September 28 2021
various AX200D2WL- TestRpt-SAR-20210906 RF Exposure Info pdf 4.11 MiB September 22 2021 / September 28 2021
various AX200D2WL- UNII Declaration letter Cover Letter(s) pdf 146.37 KiB September 16 2021 / September 28 2021
various TempConfidential AX200D2WL- Tsup-SAR Test Setup Photos pdf 250.55 KiB September 16 2021 / March 28 2022 delayed release
various AX200D2WL- TestRpt-SAR RF Exposure Info pdf 4.88 MiB January 18 2021 / January 27 2021
various AX200D2WL- Class II Change 20210511 Cover Letter(s) pdf 165.69 KiB May 11 2021 / May 12 2021
various AX200D2WL- TestRpt SAR RF Exposure Info pdf 3.84 MiB May 11 2021 / May 12 2021
various Confidential AX200D2WL- BlkDia Block Diagram pdf May 11 2021 confidential
various Confidential AX200D2WL- OPDes Operational Description pdf May 11 2021 confidential
various Confidential AX200D2WL- Schem Schematics pdf May 11 2021 confidential
various TempConfidential AX200D2WL- Tsup Test Setup Photos pdf 1.62 MiB May 11 2021 / November 08 2021 delayed release
various AX200D2WL- Class II Change-OK Cover Letter(s) pdf 85.90 KiB January 19 2021 / January 27 2021
various AX200D2WL- Declaration of authorization-OK Cover Letter(s) pdf 90.68 KiB January 19 2021 / January 27 2021
various AX200D2WL- Tsup-SAR Test Setup Photos pdf 348.22 KiB January 18 2021 / January 27 2021
various AX200D2WL- UNII Declaration letter-OK Cover Letter(s) pdf 213.87 KiB January 19 2021 / January 27 2021
various Confidential AX200D2WL- OPDes-G-Sensor Operational Description pdf January 18 2021 confidential
various Confidential AX200D2WL- Schem Operational Description pdf January 18 2021 confidential
various AX200D2WL- Confidentiality Request-OK Cover Letter(s) pdf 114.65 KiB January 19 2021 / January 27 2021
various ConfidentialityRequest Long-term Cover Letter(s) pdf 57.89 KiB January 04 2021 / January 05 2021
various ConfidentialityRequest Short-term Cover Letter(s) pdf 57.98 KiB January 04 2021 / January 05 2021
various Cover Letter Agent Authorization Cover Letter(s) pdf 220.10 KiB January 04 2021 / January 05 2021
various Description of Permissive Change rev Cover Letter(s) pdf 31.16 KiB January 04 2021 / January 05 2021
various Operational Description Operational Description pdf January 04 2021 confidential
various RF Exposure Info SAR NBmode RF Exposure Info pdf 3.36 MiB January 04 2021 / January 05 2021
various RF Exposure Info SAR PADmode RF Exposure Info pdf 3.83 MiB January 04 2021 / January 05 2021
various TestSetupPhotos SAR NBmode Test Setup Photos pdf 727.53 KiB January 04 2021 / February 28 2021 delayed release
various TestSetupPhotos SAR PADmode Test Setup Photos pdf 891.05 KiB January 04 2021 / February 28 2021 delayed release
various Cover Letter(s) pdf December 25 2020 / December 29 2020
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 220.35 KiB December 25 2020 / December 29 2020
various Description of Permissive Change Cover Letter(s) pdf 208.62 KiB December 25 2020 / December 29 2020
various Letter of Authorization (by Intel) Cover Letter(s) pdf 95.89 KiB December 25 2020 / December 29 2020
various AX200D2WL- Class II Change 20201118 Cover Letter(s) pdf 131.40 KiB November 20 2020 / November 21 2020
various AX200D2WL- Confidentiality Request 20201118 Cover Letter(s) pdf 216.49 KiB November 20 2020 / November 21 2020
various AX200D2WL- Declaration of authorization 20201118 Cover Letter(s) pdf 98.55 KiB November 20 2020 / November 21 2020
various AX200D2WL- TestRpt SAR part1 20201105 RF Exposure Info pdf 4.92 MiB November 20 2020 / November 21 2020
various AX200D2WL- TestRpt SAR part2 RF Exposure Info pdf 4.13 MiB November 20 2020 / November 21 2020
various AX200D2WL- UNII Declaration letter 20201118 Cover Letter(s) pdf 523.88 KiB November 20 2020 / November 21 2020
various TempConfidential AX200D2WL- Tsup SAR Test Setup Photos pdf 113.62 KiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- Class II Change 20200813 Cover Letter(s) pdf 96.20 KiB August 12 2020 / August 24 2020
various AX200D2WL- Confidentiality Request 20200813 Cover Letter(s) pdf 223.37 KiB August 12 2020 / August 24 2020
various AX200D2WL- Declaration of authorization 20200813 Cover Letter(s) pdf 104.68 KiB August 12 2020 / August 24 2020
various AX200D2WL- UNII Declaration letter 20200813 Cover Letter(s) pdf 533.55 KiB August 12 2020 / August 24 2020
various Confidential AX200D2WL- OPDes-20200813 Operational Description pdf August 12 2020 confidential
various Confidential AX200D2WL- OPDes-G-Sensor-20200813 Operational Description pdf August 12 2020 confidential
various AX200D2WL- Class II Change Cover Letter(s) pdf 79.11 KiB March 31 2020
various AX200D2WL- ATTESTATION-1127 Cover Letter(s) pdf 168.97 KiB November 28 2019
various AX200D2WL- Class II Change-1127 Cover Letter(s) pdf 161.57 KiB November 28 2019
various AX200D2WL- Confidentiality Request-1127 Cover Letter(s) pdf 179.27 KiB November 28 2019
various Test Setup Photos pdf November 28 2019
various AX200D2WL UNII Declaration letter 1127V2 Cover Letter(s) pdf 217.54 KiB November 28 2019
various Confidential AX200D2WL- Schem-Part 1 Schematics pdf November 28 2019 confidential
various Confidential AX200D2WL- Schem-Part 2 Schematics pdf November 28 2019 confidential
various AX200D2WL- Declaration of authorization-1127 Cover Letter(s) pdf 154.28 KiB November 28 2019
various Test Report pdf November 28 2019
various AX200D2WL- ATTESTATION-20190506 Cover Letter(s) pdf 112.00 KiB August 05 2019 / September 05 2019
various AX200D2WL- Auth Ltr Change of ID Cover Letter(s) pdf 65.08 KiB August 05 2019 / September 05 2019
various AX200D2WL- Confidentiality Cover Letter(s) pdf 266.17 KiB August 05 2019 / September 05 2019
various AX200D2WL- Declaration letter for electrically identical-20190506 Cover Letter(s) pdf 100.59 KiB August 05 2019 / September 05 2019
various AX200D2WL- Declaration of authorization-20190506 Cover Letter(s) pdf 92.91 KiB August 05 2019 / September 05 2019
various AX200D2WL- UserMan Users Manual pdf 829.71 KiB January 18 2021 / January 27 2021
various AX200D2WL- UserMan-1128 Users Manual pdf 1.58 MiB November 28 2019
various TempConfidential AX200D2WL- UserMan Users Manual pdf 3.36 MiB August 12 2020 / February 21 2021 delayed release
various TempConfidential AX200D2WL- UserMan Part1 Users Manual pdf 4.38 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- UserMan Part2 Users Manual pdf 4.93 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- UserMan Part3 Users Manual pdf 1.21 MiB September 16 2021 / March 28 2022 delayed release
various AX200D2WL- Inpho SAR Internal Photos pdf 4.37 MiB November 28 2019
various Confidential AX200D2WL- Inpho-SAR Part1 Internal Photos pdf 4.95 MiB January 18 2021 / January 27 2021
various Confidential AX200D2WL- Inpho-SAR Part2 Internal Photos pdf 4.71 MiB January 18 2021 / January 27 2021
various Confidential AX200D2WL- Inpho-SAR Part3 Internal Photos pdf 3.66 MiB January 18 2021 / January 27 2021
various Internal Photos Internal Photos pdf 4.79 MiB January 04 2021 / February 28 2021 delayed release
various TempConfidential AX200D2WL- Inpho Internal Photos pdf 4.53 MiB May 11 2021 / November 08 2021 delayed release
various TempConfidential AX200D2WL- Inpho-SAR Internal Photos pdf 4.99 MiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- Inpho SAR Internal Photos pdf 3.94 MiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- Expho-SAR External Photos pdf 916.99 KiB January 18 2021 / January 27 2021
various AX200D2WL- Expho SAR External Photos pdf 212.80 KiB November 28 2019
various External Photos External Photos pdf 1011.03 KiB January 04 2021 / February 28 2021 delayed release
various TempConfidential AX200D2WL- Expho External Photos pdf 1.35 MiB May 11 2021 / November 08 2021 delayed release
various TempConfidential AX200D2WL- Expho-SAR External Photos pdf 525.48 KiB September 16 2021 / March 28 2022 delayed release
various TempConfidential AX200D2WL- Expho SAR External Photos pdf 521.05 KiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- ISED Label ID Label/Location Info pdf 184.90 KiB March 31 2020
various AX200D2WL- LabelLoc ID Label/Location Info pdf 208.90 KiB September 16 2021 / September 28 2021
various AX200D2WL- LabelLoc-20190506 ID Label/Location Info pdf 81.31 KiB August 05 2019 / September 05 2019
various AX200D2WL- LabelLoc 20200813 ID Label/Location Info pdf 104.20 KiB August 12 2020 / August 24 2020
various AX200D2WL- Labelsmpl ID Label/Location Info pdf 242.92 KiB September 16 2021 / September 28 2021
various AX200D2WL- Class II Change-20210917 Cover Letter(s) pdf 155.47 KiB September 22 2021 / September 28 2021
various AX200D2WL- Confidentiality Request Cover Letter(s) pdf 147.77 KiB September 16 2021 / September 28 2021
various AX200D2WL- Declaration of authorization Cover Letter(s) pdf 139.63 KiB September 16 2021 / September 28 2021
various AX200D2WL- TestRpt-SAR-20210906 RF Exposure Info pdf 4.11 MiB September 22 2021 / September 28 2021
various AX200D2WL- UNII Declaration letter Cover Letter(s) pdf 146.37 KiB September 16 2021 / September 28 2021
various TempConfidential AX200D2WL- Tsup-SAR Test Setup Photos pdf 250.55 KiB September 16 2021 / March 28 2022 delayed release
various AX200D2WL- TestRpt-SAR RF Exposure Info pdf 4.88 MiB January 18 2021 / January 27 2021
various AX200D2WL- Class II Change 20210511 Cover Letter(s) pdf 165.69 KiB May 11 2021 / May 12 2021
various AX200D2WL- TestRpt SAR RF Exposure Info pdf 3.84 MiB May 11 2021 / May 12 2021
various TempConfidential AX200D2WL- Tsup Test Setup Photos pdf 1.62 MiB May 11 2021 / November 08 2021 delayed release
various AX200D2WL- Class II Change-OK Cover Letter(s) pdf 85.90 KiB January 19 2021 / January 27 2021
various AX200D2WL- Declaration of authorization-OK Cover Letter(s) pdf 90.68 KiB January 19 2021 / January 27 2021
various AX200D2WL- Tsup-SAR Test Setup Photos pdf 348.22 KiB January 18 2021 / January 27 2021
various AX200D2WL- UNII Declaration letter-OK Cover Letter(s) pdf 213.87 KiB January 19 2021 / January 27 2021
various AX200D2WL- Confidentiality Request-OK Cover Letter(s) pdf 114.65 KiB January 19 2021 / January 27 2021
various ConfidentialityRequest Long-term Cover Letter(s) pdf 57.89 KiB January 04 2021 / January 05 2021
various ConfidentialityRequest Short-term Cover Letter(s) pdf 57.98 KiB January 04 2021 / January 05 2021
various Cover Letter Agent Authorization Cover Letter(s) pdf 220.10 KiB January 04 2021 / January 05 2021
various Description of Permissive Change rev Cover Letter(s) pdf 31.16 KiB January 04 2021 / January 05 2021
various RF Exposure Info SAR NBmode RF Exposure Info pdf 3.36 MiB January 04 2021 / January 05 2021
various RF Exposure Info SAR PADmode RF Exposure Info pdf 3.83 MiB January 04 2021 / January 05 2021
various TestSetupPhotos SAR NBmode Test Setup Photos pdf 727.53 KiB January 04 2021 / February 28 2021 delayed release
various TestSetupPhotos SAR PADmode Test Setup Photos pdf 891.05 KiB January 04 2021 / February 28 2021 delayed release
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 220.35 KiB December 25 2020 / December 29 2020
various Description of Permissive Change Cover Letter(s) pdf 208.62 KiB December 25 2020 / December 29 2020
various Letter of Authorization (by Intel) Cover Letter(s) pdf 95.89 KiB December 25 2020 / December 29 2020
various AX200D2WL- Class II Change 20201118 Cover Letter(s) pdf 131.40 KiB November 20 2020 / November 21 2020
various AX200D2WL- Confidentiality Request 20201118 Cover Letter(s) pdf 216.49 KiB November 20 2020 / November 21 2020
various AX200D2WL- Declaration of authorization 20201118 Cover Letter(s) pdf 98.55 KiB November 20 2020 / November 21 2020
various AX200D2WL- TestRpt SAR part1 20201105 RF Exposure Info pdf 4.92 MiB November 20 2020 / November 21 2020
various AX200D2WL- TestRpt SAR part2 RF Exposure Info pdf 4.13 MiB November 20 2020 / November 21 2020
various AX200D2WL- UNII Declaration letter 20201118 Cover Letter(s) pdf 523.88 KiB November 20 2020 / November 21 2020
various TempConfidential AX200D2WL- Tsup SAR Test Setup Photos pdf 113.62 KiB November 20 2020 / May 20 2021 delayed release
various AX200D2WL- Class II Change 20200813 Cover Letter(s) pdf 96.20 KiB August 12 2020 / August 24 2020
various AX200D2WL- Confidentiality Request 20200813 Cover Letter(s) pdf 223.37 KiB August 12 2020 / August 24 2020
various AX200D2WL- Declaration of authorization 20200813 Cover Letter(s) pdf 104.68 KiB August 12 2020 / August 24 2020
various AX200D2WL- UNII Declaration letter 20200813 Cover Letter(s) pdf 533.55 KiB August 12 2020 / August 24 2020
various AX200D2WL- Class II Change Cover Letter(s) pdf 79.11 KiB March 31 2020
various AX200D2WL- ATTESTATION-1127 Cover Letter(s) pdf 168.97 KiB November 28 2019
various AX200D2WL- Class II Change-1127 Cover Letter(s) pdf 161.57 KiB November 28 2019
various AX200D2WL- Confidentiality Request-1127 Cover Letter(s) pdf 179.27 KiB November 28 2019
various AX200D2WL UNII Declaration letter 1127V2 Cover Letter(s) pdf 217.54 KiB November 28 2019
various AX200D2WL- Declaration of authorization-1127 Cover Letter(s) pdf 154.28 KiB November 28 2019
various AX200D2WL- ATTESTATION-20190506 Cover Letter(s) pdf 112.00 KiB August 05 2019 / September 05 2019
various AX200D2WL- Auth Ltr Change of ID Cover Letter(s) pdf 65.08 KiB August 05 2019 / September 05 2019
various AX200D2WL- Confidentiality Cover Letter(s) pdf 266.17 KiB August 05 2019 / September 05 2019
various AX200D2WL- Declaration letter for electrically identical-20190506 Cover Letter(s) pdf 100.59 KiB August 05 2019 / September 05 2019
various AX200D2WL- Declaration of authorization-20190506 Cover Letter(s) pdf 92.91 KiB August 05 2019 / September 05 2019

frequency equipment class purpose
1 2021-09-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2422 ~ 2462 DTS - Digital Transmission System
4 2021-05-12 2422 ~ 2462 DTS - Digital Transmission System
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2021-01-27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2422 ~ 2462 DTS - Digital Transmission System
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2021-01-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
11 2422 ~ 2462 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2020-12-29 2422 ~ 2462 DTS - Digital Transmission System
14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 2020-11-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
18 2422 ~ 2462 DTS - Digital Transmission System
19 2020-08-24 2422 ~ 2462 DTS - Digital Transmission System
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2020-03-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
24 2422 ~ 2462 DTS - Digital Transmission System
25 2019-11-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2422 ~ 2462 DTS - Digital Transmission System
28 2019-05-09 JBP - Part 15 Class B Computing Device Peripheral Change in identification of presently authorized equipment. Original FCC ID: PD9AX200D2L Grant Date: 03/04/2019
29 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 2402 ~ 2480 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2021-09-28
various 2021-05-12
various 2021-01-27
various 2021-01-05
various 2020-12-29
various 2020-11-21
various 2020-08-24
various 2020-03-31
various 2019-11-28
various 2019-05-09
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 1F, No. 15, Lide Rd.
various 4F, No. 150, Li-Te Rd.
various Beitou, Taipei, N/A
various Beitou, Taipei
various Peitou, Taipei
various Peitou, Taipei, 112
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various b******@phoenix-testlab.de
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code AX200D2L
app s Person at the applicant's address to receive grant or for contact
various Name J******** Y******
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various DEKRA Testing and Certification Co., Ltd.
various Name F**** Y******
various T******** H******
various A******** L******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various New Taipei City, 24451
various New Taipei City
various Taiwan
various Telephone Number +8862********
various 886-2********
various Fax Number 886-2********
various E-mail f******@dekra.com
various t******@dekra.com
various a******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/28/2022
various11/08/2021
various02/28/2021
various05/20/2021
various02/21/2021
various11/05/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wireless-AX200
variousIntel Wireless -AX200
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousLimited Single Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in identification of presently authorized equipment. Original FCC ID: PD9AX200D2L Grant Date: 03/04/2019
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UM535Q,UM5500Q, BM535Q, RM535QP with antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000 and 14008-04150200 and antenna LUXSHARE, part no.LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100 and 14008-04150300. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 0.37 W/kg and 0.52 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UM535Q, UM5500Q, BM535Q, RM535QP with antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000 and 14008-04150200 and antenna LUXSHARE, part no. LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100 and 14008-04150300. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 0.15 W/kg and 1.13 W/kg.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS UM535Q,UM5500Q, BM535Q, RM535QP with antenna INPAQ, part no. MDA-LBLB-04-016, MDA-LB-01-014, 14008-04150000 and 14008-04150200 and antenna LUXSHARE, part no.LA9RF274-CS-H, LA9RF275-CS-H, 14008-04150100 and 14008-04150300. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported reported Body and Simultaneous SAR values are 0.98 W/kg and 1.13 W/kg.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS, H5600Q, J5600Q and W5600Q with the antenna LUXSHARE, part no. LA9RF322-CS-H, LA9RF321-CS-H, 14008-04440000 and 14008-04440100. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.00 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS, H5600Q, J5600Q and W5600Q with the antenna LUXSHARE, part no. LA9RF322-CS-H, LA9RF321-CS-H, 14008-04440000 and 14008-04440100. The highest reported Body and Simultaneous SAR values are 0.89 W/kg and 1.14 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS, H5600Q, J5600Q and W5600Q with the antenna LUXSHARE, part no. LA9RF322-CS-H, LA9RF321-CS-H, 14008-04440000 and 14008-04440100. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 1.14 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD, CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 and AYF6Y-100049. The highest reported reported Body and Simultaneous SAR values are 0.25W/kg and 1.40W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD, CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 and AYF6Y-100049. The highest reported reported Body and Simultaneous SAR values are 1.05W/kg and 1.25W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD, CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 and AYF6Y-100049. The highest reported reported Body and Simultaneous SAR values are 1.15W/kg and 1.40W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS GV301Q, GV301QC, GV301QE, GV301QH with the antenna brand ASAP, Model: LA9RF298-CS-H and LA9RF299-CS-H. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS GV301Q, GV301QC, GV301QE, GV301QH with the antenna brand ASAP, Model: LA9RF298-CS-H and LA9RF299-CS-H. The highest reported Body and Simultaneous SAR values are 1.0 W/kg and 1.58 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS GV301Q, GV301QC, GV301QE, GV301QH with the antenna brand ASAP, Model: LA9RF298-CS-H and LA9RF299-CS-H. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 1.58 W/kg respectively.
variousClass II Permissive Change with a decrease in the WLAN Output Power through firmware and demonstrated SAR compliance with 5mm distance to body Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 0.82 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR compliance was demonstrated with decreased power setting.
variousClass II Permissive Change with a decrease in the WLAN Output Power through firmware and demonstrated SAR compliance with 5mm distance to body Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61 W/kg and 1.25 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR compliance was demonstrated with decreased power setting.
variousClass II Permissive Change with a decrease in the WLAN Output Power through firmware and demonstrated SAR compliance with 5mm distance to body. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09 W/kg and 1.25W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR compliance was demonstrated with decreased power setting.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS UX482E, BX482E and RX482E with the antenna INPAQ, part no. MDA-LBLB-02-003, 14008-04120300 and the antenna YAGEO, part no. ANTA0AA14072WLAN3, 14008-04120200. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS UX482E, BX482E and RX482E with the antenna INPAQ, part no. MDA-LBLB-02-003, 14008-04120300 and the antenna YAGEO, part no. ANTA0AA14072WLAN3, 14008-04120200. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS and to request approval for portable category specific host Notebook PC, model number: ASUS UX482E, BX482E and RX482E with the antenna INPAQ, part no. MDA-LBLB-02-003, 14008-04120300 and the antenna YAGEO, part no. ANTA0AA14072WLAN3, 14008-04120200. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 0.89 W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM562I and Q507I with the antenna ACON, part no. ANF6Y-100056, ANF6Y-100057, 14008-03240400 and 04072-02950200. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM562I and Q507I with the antenna ACON, part no. ANF6Y-100056, ANF6Y-100057, 14008-03240400 and 04072-02950200. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM562I and Q507I with the antenna ACON, part no. ANF6Y-100056, ANF6Y-100057, 14008-03240400 and 04072-02950200. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.46 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433I and Q407I with the antenna ACON(AWAN), part no. AML6Y-100093, AML6Y-100094, 14008-03590400 and 14008-03590500 and LUXSHARE-ICT, part no. LA9RF264-CS-H, LA9RF263-CS-H, 14008-03590700 and 14008-03590600. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.25 W/kg respectively.  
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433I and Q407I with the antenna ACON(AWAN), part no. AML6Y-100093, AML6Y-100094, 14008-03590400 and 14008-03590500 and LUXSHARE-ICT, part no. LA9RF264-CS-H, LA9RF263-CS-H, 14008-03590700 and 14008-03590600. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.25 W/kg respectively.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433I and Q407I with the antenna ACON(AWAN), part no. AML6Y-100093, AML6Y-100094, 14008-03590400 and 14008-03590500 and LUXSHARE-ICT, part no. LA9RF264-CS-H, LA9RF263-CS-H, 14008-03590700 and 14008-03590600. The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 0.72 W/kg respectively.
varioussimultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS W500G and H500G with the antenna INPAQ, part no. WA-F-LB-02-201, WA-F-LB-01-078, 14008-03830100 and 14008-03830000. The highest reported Body and Simultaneous SAR values are 1.14 and 1.50W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS W500G and H500G with the antenna INPAQ, part no. WA-F-LB-02-201, WA-F-LB-01-078, 14008-03830100 and 14008-03830000. The highest reported Body and Simultaneous SAR values are 0.36 and 1.50W/kg respectively.  
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS W500G and H500G with the antenna INPAQ, part no. WA-F-LB-02-201, WA-F-LB-01-078, 14008-03830100 and 14008-03830000. The highest reported Body and Simultaneous SAR values are 0.96 and 1.32W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various Intel Corporation S.A.S.
various Name V**** L******
various N**** A********
various Telephone Number 88628******** Extension:
various 00334********
various Fax Number 88628********
various 00334********
various E-mail v******@dekra.com
various n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.188
1 2 15E CC MO 5190 5230 0.172
1 3 15E CC MO 5210 5210 0.103
1 4 15E CC MO 5250 5250 0.075
1 5 15E CC MO ND 5260 5320 0.193
1 6 15E CC MO ND 5270 5310 0.169
1 7 15E CC MO ND 5290 5290 0.086
1 8 15E CC MO ND 5500 5700 0.191
1 9 15E CC MO ND 5710 5710 0.188
1 1 15E CC MO ND 5720 5720 0.155
1 11 15E CC MO ND 5530 5690 0.201
1 12 15E CC MO 5745 5825 0.212
1 13 15E CC MO 5755 5795 0.205
1 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.008
3 2 15C CC MO 2412 2472 1
3 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.008
4 2 15C CC MO 2412 2472 1
4 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.188
5 2 15E CC MO 5190 5230 0.172
5 3 15E CC MO 5210 5210 0.103
5 4 15E CC MO 5250 5250 0.075
5 5 15E CC MO ND 5260 5320 0.193
5 6 15E CC MO ND 5270 5310 0.169
5 7 15E CC MO ND 5290 5290 0.086
5 8 15E CC MO ND 5500 5700 0.191
5 9 15E CC MO ND 5710 5710 0.188
5 1 15E CC MO ND 5720 5720 0.155
5 11 15E CC MO ND 5530 5690 0.201
5 12 15E CC MO 5745 5825 0.212
5 13 15E CC MO 5755 5795 0.205
5 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.008
8 2 15C CC MO 2412 2472 1
8 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.188
9 2 15E CC MO 5190 5230 0.172
9 3 15E CC MO 5210 5210 0.103
9 4 15E CC MO 5250 5250 0.075
9 5 15E CC MO ND 5260 5320 0.193
9 6 15E CC MO ND 5270 5310 0.169
9 7 15E CC MO ND 5290 5290 0.086
9 8 15E CC MO ND 5500 5700 0.191
9 9 15E CC MO ND 5710 5710 0.188
9 1 15E CC MO ND 5720 5720 0.155
9 11 15E CC MO ND 5530 5690 0.201
9 12 15E CC MO 5745 5825 0.212
9 13 15E CC MO 5755 5795 0.205
9 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E 38 CC MO 5180 5240 0.188
10 2 15E 38 CC MO 5190 5230 0.172
10 3 15E 38 CC MO 5210 5210 0.103
10 4 15E 38 CC MO 5250 5250 0.075
10 5 15E 38 CC MO ND 5260 5320 0.193
10 6 15E 38 CC MO ND 5270 5310 0.169
10 7 15E 38 CC MO ND 5290 5290 0.086
10 8 15E 38 CC MO ND 5500 5720 0.191
10 9 15E 38 CC MO ND 5710 5710 0.188
10 1 15E 38 CC MO ND 5720 5720 0.155
10 11 15E 38 CC MO ND 5530 5690 0.201
10 12 15E 38 CC MO 5745 5825 0.212
10 13 15E 38 CC MO 5755 5795 0.205
10 14 15E 38 CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.008
11 2 15C CC MO 2412 2472 1
11 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.008
13 2 15C CC MO 2412 2472 1
13 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.188
14 2 15E 38 CC MO 5190 5230 0.172
14 3 15E 38 CC MO 5210 5210 0.103
14 4 15E 38 CC MO 5250 5250 0.075
14 5 15E 38 CC MO ND 5260 5320 0.193
14 6 15E 38 CC MO ND 5270 5310 0.169
14 7 15E 38 CC MO ND 5290 5290 0.086
14 8 15E 38 CC MO ND 5500 5700 0.191
14 9 15E 38 CC MO ND 5710 5710 0.188
14 1 15E 38 CC MO ND 5720 5720 0.155
14 11 15E 38 CC MO ND 5530 5690 0.201
14 12 15E 38 CC MO 5745 5825 0.212
14 13 15E 38 CC MO 5755 5795 0.205
14 14 15E 38 CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC MO 5180 5240 0.188
17 2 15E CC MO 5190 5230 0.172
17 3 15E CC MO 5210 5210 0.103
17 4 15E CC MO 5250 5250 0.075
17 5 15E CC MO ND 5260 5320 0.193
17 6 15E CC MO ND 5270 5310 0.169
17 7 15E CC MO ND 5290 5290 0.086
17 8 15E CC MO ND 5500 5700 0.191
17 9 15E CC MO ND 5710 5710 0.188
17 1 15E CC MO ND 5720 5720 0.155
17 11 15E CC MO ND 5530 5690 0.201
17 12 15E CC MO 5745 5825 0.212
17 13 15E CC MO 5755 5795 0.205
17 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.008
18 2 15C CC MO 2412 2472 1
18 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.008
19 2 15C CC MO 2412 2472 1
19 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.188
20 2 15E CC MO 5190 5230 0.172
20 3 15E CC MO 5210 5210 0.103
20 4 15E CC MO 5250 5250 0.075
20 5 15E CC MO ND 5260 5320 0.193
20 6 15E CC MO ND 5270 5310 0.169
20 7 15E CC MO ND 5290 5290 0.086
20 8 15E CC MO ND 5500 5700 0.191
20 9 15E CC MO ND 5710 5710 0.188
20 1 15E CC MO ND 5720 5720 0.155
20 11 15E CC MO ND 5530 5690 0.201
20 12 15E CC MO 5745 5825 0.212
20 13 15E CC MO 5755 5795 0.205
20 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.188
23 2 15E CC MO 5190 5230 0.172
23 3 15E CC MO 5210 5210 0.103
23 4 15E CC MO 5250 5250 0.075
23 5 15E CC MO ND 5260 5320 0.193
23 6 15E CC MO ND 5270 5310 0.169
23 7 15E CC MO ND 5290 5290 0.086
23 8 15E CC MO ND 5500 5700 0.191
23 9 15E CC MO ND 5710 5710 0.188
23 1 15E CC MO ND 5720 5720 0.155
23 11 15E CC MO ND 5530 5690 0.201
23 12 15E CC MO 5745 5825 0.212
23 13 15E CC MO 5755 5795 0.205
23 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.008
24 2 15C CC MO 2412 2472 1
24 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC MO 5180 5240 0.188
25 2 15E CC MO 5190 5230 0.172
25 3 15E CC MO 5210 5210 0.103
25 4 15E CC MO 5250 5250 0.075
25 5 15E CC MO ND 5260 5320 0.193
25 6 15E CC MO ND 5270 5310 0.169
25 7 15E CC MO ND 5290 5290 0.086
25 8 15E CC MO ND 5500 5700 0.191
25 9 15E CC MO ND 5710 5710 0.188
25 1 15E CC MO ND 5720 5720 0.155
25 11 15E CC MO ND 5530 5690 0.201
25 12 15E CC MO 5745 5825 0.212
25 13 15E CC MO 5755 5795 0.205
25 14 15E CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.008
27 2 15C CC MO 2412 2472 1
27 3 15C CC MO 2422 2462 0.995
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E 38 CC MO 5180 5240 0.188
29 2 15E 38 CC MO 5190 5230 0.172
29 3 15E 38 CC MO 5210 5210 0.103
29 4 15E 38 CC MO 5250 5250 0.075
29 5 15E 38 CC MO ND 5260 5320 0.193
29 6 15E 38 CC MO ND 5270 5310 0.169
29 7 15E 38 CC MO ND 5290 5290 0.086
29 8 15E 38 CC MO ND 5500 5700 0.191
29 9 15E 38 CC MO ND 5710 5710 0.188
29 1 15E 38 CC MO ND 5720 5720 0.155
29 11 15E 38 CC MO ND 5530 5690 0.201
29 12 15E 38 CC MO 5745 5825 0.212
29 13 15E 38 CC MO 5755 5795 0.205
29 14 15E 38 CC MO 5775 5775 0.18
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402 2480 0.008
31 2 15C CC MO 2412 2472 1
31 3 15C CC MO 2422 2462 0.995

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC