FCC ID: MSQ7260H Model 7260HMW Wireless Network Adapter

by: ASUSTeK Computer Inc latest update: 2016-03-10 model: 7260H

Sixteen grants have been issued under this FCC ID from 04/19/2014 to 03/10/2016 (this is one of two hundred and two releases in 2016 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked drivers, password defaults, troubleshooting guides, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (7260HMW) UserMan Users Manual pdf 3.49 MiB
various (7260HMW) UserMan-2014-04-29 Users Manual pdf 3.91 MiB / January 05 2014
various (7260HMW) UserMan 2014.04.30 Users Manual pdf 3.48 MiB January 05 2014
various User manual Users Manual pdf 2.94 MiB October 03 2016
various Cover Letter(s) pdf July 03 2016 / October 03 2016
various Cover Letter(s) pdf July 03 2016 / October 03 2016
various External Photos pdf July 03 2016 / October 03 2016
various Internal Photos pdf July 03 2016 / October 03 2016
various Internal Photos pdf July 03 2016 / October 03 2016
various Cover Letter(s) pdf July 03 2016 / October 03 2016
various Cover Letter(s) pdf July 03 2016 / October 03 2016
various Test Report pdf July 03 2016 / October 03 2016
various Test Setup Photos pdf July 03 2016 / October 03 2016
various ID Label/Location Info pdf July 03 2016 / October 03 2016
various ID Label/Location Info pdf July 03 2016 / October 03 2016
various ID Label/Location Info pdf July 03 2016 / October 03 2016
various Cover Letter(s) pdf July 03 2016 / October 03 2016
various RF Exposure Info pdf July 03 2016 / October 03 2016
various RF Exposure Info pdf July 03 2016 / October 03 2016
various Test Report pdf July 03 2016 / October 03 2016
various Test Report pdf July 03 2016 / October 03 2016
various Test Report pdf July 03 2016 / October 03 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Test Report pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf January 05 2014
various External Photos pdf January 05 2014
various Cover Letter(s) pdf January 05 2014
various Cover Letter(s) pdf January 05 2014
various Internal Photos pdf January 05 2014
various Test Report pdf January 05 2014
various Test Report pdf January 05 2014
various RF Exposure Info pdf January 05 2014
various Test Setup Photos pdf January 05 2014
various Test Report pdf January 05 2014
various Cover Letter(s) pdf / January 05 2014
various External Photos pdf / January 05 2014
various External Photos pdf / January 05 2014
various Cover Letter(s) pdf / January 05 2014
various Test Report pdf / January 05 2014
various Test Report pdf / January 05 2014
various Test Report pdf / January 05 2014
various Test Report pdf January 05 2014
various Test Report pdf / January 05 2014
various Cover Letter(s) pdf
various External Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various (7260HMW) UserMan Users Manual pdf 3.49 MiB
various (7260HMW) UserMan-2014-04-29 Users Manual pdf 3.91 MiB / January 05 2014
various (7260HMW) UserMan 2014.04.30 Users Manual pdf 3.48 MiB January 05 2014
various User manual Users Manual pdf 2.94 MiB October 03 2016

frequency equipment class purpose
1 2016-03-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2412 ~ 2462 DTS - Digital Transmission System
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2014-06-23 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
5 5755 ~ 5795 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2014-05-01 5755 ~ 5795 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5755 ~ 5795 DTS - Digital Transmission System
10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
12 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
13 2014-04-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
14 5755 ~ 5795 DTS - Digital Transmission System
15 JBP - Part 15 Class B Computing Device Peripheral
16 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2016-03-10
various 2014-06-23
various 2014-05-01
various 2014-04-19
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 4F, No. 150, Li-Te Rd.
various Peitou, Taipei, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address T******@siemic.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code 7260H
app s Person at the applicant's address to receive grant or for contact
various Name J****** Y******
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name QuieTek Corporation
various Name M******** C******
various M****** C******** N****
various Physical Address No. 5-22, Rueishu Keng, Linkou Dist.
various New Taipei City, 24451
various New Taipei City
various Taiwan
various Telephone Number 886-2******** Extension:
various 88628******** Extension:
various +8862******** Extension:
various Fax Number 886-2********
various E-mail m******@quietek.com
various m******@quietek.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Model 7260HMW Wireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsCIIPC for adding host ASUS Notebook PC model E403S, L403S, R416S. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR calculated per KDB447498: 0.13W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS N542L and Q502L, with antenna ACON, part no. APP6P-701148 and INPAQ, part no. WA-F-LBLB-04-022.
variousCIIPC for adding host ASUS Notebook PC model E403S, L403S, R416S. The highest reported SAR for stand-alone and simultaneous transmission mode is 0.59W/kg and 0.72W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP300L and Q302L, with antenna INPAQ, part no. WA-F-LBLB-04-024. The highest measurement body SAR value at 5.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.22 W/kg. Simultaneous transmission: 1.35 W/kg.
variousCIIPC for adding host ASUS Notebook PC model E403S, L403S, R416S. The highest reported SAR for stand-alone and simultaneous transmission mode is 0.48W/kg and 0.61W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP300L and Q302L, with antenna INPAQ, part no. WA-F-LBLB-04-024. The highest measurement body SAR value at 5.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.22 W/kg. Simultaneous transmission: 1.35 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Simultaneous SAR calculated per KDB447498: 0.39W/kg. Class II Permissive Change with a decreasing in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q551L and N591L, with antenna ACON, part no. APP6P-701177 and INPAQ, part no. WA-F-LBLB-04-025.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decreasing in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q551L and N591L, with antenna ACON, part no. APP6P-701177 and INPAQ, part no. WA-F-LBLB-04-025. The highest measurement body SAR value at 5.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.28 W/kg. Simultaneous transmission: 1.41 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR calculated per KDB447498: 0.13W/kg. Class II Permissive Change with a decreasing in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q551L and N591L, with antenna ACON, part no. APP6P-701177 and INPAQ, part no. WA-F-LBLB-04-025.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP300L and Q302L, with antenna INPAQ, part no. WA-F-LBLB-04-024. The highest measurement body SAR value at 5.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.22 W/kg. Simultaneous transmission: 1.35 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR calculated per KDB447498: 0.13W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP300L and Q302L, with antenna INPAQ, part no. WA-F-LBLB-04-024.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS N542L and Q502L, with antenna ACON, part no. APP6P-701148 and INPAQ, part no. WA-F-LBLB-04-022. The highest measurement body SAR value at 5.0mm antenna-to-user separation distance in this Tablet Computer host is: 1.35 W/kg. Simultaneous transmission: 1.48 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR calculated per KDB447498: 0.13W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS N542L and Q502L, with antenna ACON, part no. APP6P-701148 and INPAQ, part no. WA-F-LBLB-04-022.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator isresponsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Simultaneous SAR calculated per KDB447498: 0.39W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP300L and Q302L, with antenna INPAQ, part no. WA-F-LBLB-04-024.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator isresponsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Simultaneous SAR calculated per KDB447498: 0.39W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS N542L and Q502L, with antenna ACON, part no. APP6P-701148 and INPAQ, part no. WA-F-LBLB-04-022.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.73 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-toantenna separation.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator isresponsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 1.05W/kg with separation ratio of 0.02 at 50mm antenna-toantenna separation.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various DEKRA Testing and Certification Co., Ltd.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Name R**** C********
various S******** H****
various Telephone Number 886-3******** Extension:
various 88633******** Extension:
various 886-2******** Extension:
various +886-******** Extension:
various Fax Number 886-3********
various 88632********
various 886-2********
various +886-********
various E-mail r******@tw.bureauveritas.com
various s******@quietek.com
various s******@dekra.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2412 2462 0.03
2 2 15C CC MO 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.007
3 2 15E 38 CC MO ND 5500 5720 0.007
3 3 15E 38 CC MO 5745 5825 0.007
3 4 15E 38 CC MO ND 5260 5320 0.007
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.033
4 2 15E CC MO 5190 5230 0.037
4 3 15E CC MO ND 5260 5320 0.041
4 4 15E CC MO ND 5500 5700 0.053
4 5 15E CC MO ND 5510 5670 0.047
4 6 15E CC MO ND 5710 5710 0.045
4 7 15E CC MO ND 5720 5720 0.045
4 8 15E CC MO ND 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.003
5 2 15C CC MO 2412 2462 0.397
5 3 15C CC MO 2422 2452 0.476
5 4 15C CC MO 5745 5825 0.486
5 5 15C CC MO 5755 5795 0.523
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.003
7 2 15C CC MO 2412 2462 0.397
7 3 15C CC MO 2422 2452 0.476
7 4 15C CC MO 5745 5825 0.486
7 5 15C CC MO 5755 5795 0.523
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.003
9 2 15C CC MO 2412 2462 0.397
9 3 15C CC MO 2422 2452 0.476
9 4 15C CC MO 5745 5825 0.486
9 5 15C CC MO 5755 5795 0.523
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.033
11 2 15E CC MO 5190 5230 0.037
11 3 15E CC MO ND 5260 5320 0.041
11 4 15E CC MO ND 5500 5700 0.053
11 5 15E CC MO ND 5510 5670 0.047
11 6 15E CC MO ND 5710 5710 0.045
11 7 15E CC MO ND 5720 5720 0.045
11 8 15E CC MO ND 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.033
12 2 15E CC MO 5190 5230 0.037
12 3 15E CC MO ND 5260 5320 0.041
12 4 15E CC MO ND 5500 5700 0.053
12 5 15E CC MO ND 5510 5670 0.047
12 6 15E CC MO ND 5710 5710 0.045
12 7 15E CC MO ND 5720 5720 0.045
12 8 15E CC MO ND 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.003
14 2 15C CC MO 2412 2462 0.397
14 3 15C CC MO 2422 2452 0.476
14 4 15C CC MO 5745 5825 0.486
14 5 15C CC MO 5755 5795 0.523
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.033
16 2 15E CC MO 5190 5230 0.037
16 3 15E CC MO ND 5260 5320 0.041
16 4 15E CC MO ND 5500 5700 0.053
16 5 15E CC MO ND 5510 5670 0.047
16 6 15E CC MO ND 5710 5710 0.045
16 7 15E CC MO ND 5720 5720 0.045
16 8 15E CC MO ND 5530 5690 0.047

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC