FCC ID: MSQ-RTBE6M00 ROG Rapture GT-BE98 Pro BE30000 Quad-band Gaming Router

Quick Start Guide Hardware Explanations Power switch USB 3.0 port 2.5GE WAN/LAN1 port Power (DCIN) port USB 2.0 port Reset button 10GE WAN/LAN1 port 10GE LAN LED 6GHz-2/6GHz-1/5GHz/

2.4GHz WiFi LEDs 10 /2.5GE WAN

(Internet) LED 2.5GE/1GE LAN LED Power LED E22187 ROG Rapture GT-BE98 Pro BE30000 Quad-band Gaming Router

* If no 6GHz SSID is displayed, please check whether your OS and client device are fully licensed to support the newly released 6GHz band. You can check with your OS and client device provider for Wi-Fi 6E / WI-FI 7 driver release schedule. 2.5GE LAN2-4 ports 1GE LAN5 port 10GE LAN6 port WPS button LED button Specifications:

DC Power adapter DC Output: +19V with max 3.42A current DC Output: +19.5V with max 3.33A current Operating Temperature 0~40oC Operating Humidity 50~90%

Storage Storage 0~70oC 20~90%

Router Setup Steps 01 Prepare your Modem 1 Unplug the power of cable / DSL modem. Unplug If you are using DSL for internet, you will need your username /

password from your Internet service provider (ISP) to properly configure your router. 2 Connect your modem to the 10GE WAN port at the back side of the router 4 Check the modem LED lights to ensure the connection is active. with the network cable provided. 3 Power on the modem. Plug modem to the power outlet and power on. Modem back Modem front Modem back 02 Install your Router 1 Plug the adapter into the DCIN port, and press the Power switch. 2 The Power LED will light up when the hardware is ready. Via app 3 [App] On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app. 4 [App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect to the default network SSID shown on the product label on the back side of the router. Or scan the code on the product label to connect the default network SSID. 5 [App] Launch ASUS Router App and follow the instructions to complete the setup.

/DSVNQJ
/@LD
44*%

"464_99

* XX refers to the last two digits of 2.4GHz MAC address. You can find it on the label on the back of your router. 8DKBNLD 2THBJ
*MSDQMDS
4DSTO 45"35 Or via web browser 3 [Wired] Connect your PC to a LAN (LAN2~6) port at the back side of the router using an additional network cable.

[Wireless] Connect to the network with default SSID shown on the product label on the back side of your router ASUS_XX. 4 [Wired / Wireless] Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://www.asusrouter.com Follow the instructions to complete the setup. 8DKBNLD
SN
(5#&
130 http://www.asusrouter.com

$QD@SD
@
/DV
/DSVNQJ

"CU@MBDC
4DSSHMFR Gain Another 10GE LAN Port 01 Set up 2.5GE WAN connection to release another 10GE LAN Port Under factory defaults Connect to the 2.5GE WAN port Connect the modem to the 2.5GE WAN port with a net-

work cable. Login and Connect 1 [ASUS Setup Wizard] Select Manual Setting. 2 [ASUS Setup Wizard] Select 2.5G WAN, then follow the instructions to complete the setup of SSID and login information.

*MSDQMDS

$GDBJ
$NMMDBSHNM 1KD@RD
OKTF
HM
SGD
B@AKD
SN
8"/
ONQS
4XRSDL
VHKK
CDSDBS
XNTQ MDSVNQJ
RDSSHMF
@TSNL@SHB@KKX

1QDUHNTR

.@MT@K
4DSSHMF

*MSDQMDS 8"/
$NMMDBSHNM
5XOD

$NMMDBSHNM
SXOD

(
8"/

(
8"/

02 Start to Use 1 After following the setup steps, the router will reboot for a second and start to connect the Internet with 2.5GE port. FAQ Frequently Asked Questions Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support Service and Support Video Tutorials https://www.asus.com/support https://qr.asus.com/wl_videotutorials Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite dexposition aux frquences radio dInnovation, Sciences et Dveloppement conomique du Canada (ISED). Utilisez lappareil sans fil de faon minimiser les contacts humains lors dun fonctionnement normal. Cet quipement doit tre install et utilis avec un minimum de 51cm de distance entre la source de rayonnement et votre corps. Lutilisation de cet appareil est autorise au Canada. Pour consulter lentre correspondant lappareil dans la liste dquipement radio (REL - Radio Equipment List) dInnovation, Sciences et Dveloppement conomique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Pour des informations supplmentaires concernant lexposition aux frquences radio au Canada, rendez-vous sur :

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Devices shall not be used for control of or communications with unmanned aircraft systems. Les appareils ne doivent pas tre utiliss pour contrler ou communiquer avec des systmes daronefs sans pilote. Operation shall be limited to indoor use only. Le fonctionnement doit tre limit une utilisation en intrieur uniquement. Operation on oil platforms, automobiles, trains, maritime vessels and aircraft shall be prohibited except for on large aircraft flying above 3,048 m (10,000 ft). Lexploitation sur les plates-formes ptrolires, les automobiles, les trains, les navires maritimes et les aronefs est interdite, sauf sur les gros aronefs volant au-dessus de 3,048 m (10,000 pi). Safety Notices Use this product in environments with ambient temperatures between 0C(32F) and 40C(104F). Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT place or drop objects on top and do not shove any foreign objects into the product. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms. DO NOT cover the vents on the product to prevent the system from getting overheated. DO NOT use damaged power cords, accessories, or other peripherals. If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. DO NOT mount this equipment higher than 2 meters. Consignes de scurit Utilisez ce produit dans un environnement dont la temprature ambiante est comprise entre 0C (32F) et 40C (104F). Rfrez-vous l'tiquette situe au dessous du produit pour vrifier que l'adaptateur secteur rpond aux exigences de tension. NE PAS placer sur une surface irrgulire ou instable. Contactez le service aprs-vente si le chssis a t endommag. NE PAS placer, faire tomber ou insrer d'objets sur/dans le produit. NE PAS exposer l'appareil la pluie ou l'humidit, tenez-le distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destines la ventilation du systme pour viter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres priphriques endommags. Si l'adaptateur est endommag, n'essayez pas de le rparer vous-mme. Contactez un technicien lectrique qualifi ou votre revendeur. Pour viter tout risque de choc lectrique, dbranchez le cble d'alimentation de la prise lectrique avant de toucher au systme. Ne placez pas cet appareil une hauteur suprieure 2 mtres. Informacin de seguridad Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0 C (32 F) y 40 C (104 F). Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegrese de que su adaptador de alimentacin cumple con dichos valores. NO coloque el equipo sobre una superficie irregular o inestable. Solicite asistencia tcnica si la carcasa resulta daada. NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraos dentro de l. NO exponga el equipo a lquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el mdem durante tormentas elctricas. Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilacin del producto. NO cubra los orificios de ventilacin del equipo de sobremesa para evitar que el sistema se caliente en exceso. No intente reparar la fuente de alimentacin personalmente si se avera. Pngase en contacto con un tcnico de mantenimiento autorizado o con su distribuidor. A fin de evitar posibles descargas elctricas, desconecte el cable de alimentacin de la toma de suministro elctrico antes de cambiar la posicin del sistema. NO monte este equipo a una altura superior a 2 metros. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Caution Statement:

WARNING : Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use. WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. This device is restricted for indoor use. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B) Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 51cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canadas REL (Radio Equipment List) can be found at the following web address:

http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF exposure also can be found at the following web:

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 5150 5250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. CAN ICES-003(B)/NMB-003(B)

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6915596.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei 112, Taiwan Designation of U.S. Agent for Service of Process Certification Attestation Letter Date: 2023/3/27 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Grantee Code: MSQ ATTENTION: FCC Certification Section 2.911(d)(7) Information ASUSTeK Computer Inc as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicants agent for service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed:

Designated U.S. Agent Signed:

Signed:

Signed:

Printed name: Jackson Yen Printed name: Steve Chang Title: Associate Vice President Title: President Company Name: ASUSTeK Computer Inc Company Name: ASUS Computer International FRN: 0005821988 FRN: 0033432428 Email: Jackson_Yen@asus.com Email: steve_chang@asus.com TEL: +886-2-28943447 FAX: +886-2-28987364 TEL: 510-6084530 FAX: 510-6084555 Address: 1F., No. 15, Lide Rd., Beitou, Address: 48720 Kato Road, Fremont, CA 94538 Taipei 112, Taiwan

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6915602.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Attestation Statements Date: 2023/11/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(i)-(ii) Filing FCC IDMSQ-RTBE6M00 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6915601.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Class II Change Letter Date: 2023/11/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Request for Class II Permissive Change FCC ID: MSQ-RTBE6M00 / Grant Date: 10/04/2023 Pursuant to CFR 2.1043, ASUSTeK COMPUTER INC. hereby requests a Class II Permissive Change. Modification:

Add the Zero wait for DFS by software change. Note:

No influence on Antenna as mention modification above. Antenna report is the same as the original filing. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6915600.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Confidential Letter Date: 2023/11/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDMSQ-RTBE6M00 To Whom It May Concern:

Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

Test Setup photos Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6915597.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Power of Attorney Date: 2023/11/1 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Hsinchu Laboratory Address

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name

Leo Huang Job Title

: Manager e-mail

Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: MSQ-RTBE6M00 Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Letter of Declaration on Indoor Access Point Operation Date: 2023/8/28 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC IDMSQ-RTBE6M00 To Whom It May Concern:

We, ASUSTeK COMPUTER INC., attest that this device under FCC ID MSQ-RTBE6M00 complies with device protocol requirements and operational restrictions:

1. Protocol attestation statement:

a. An 11ax IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. 2. Statement acknowledging device restrictions:

a. This device is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. c. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature

Name and Job Title E-Mail Tel Fax Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6816247.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Letter of Declaration on Indoor Subordinate Operation Date: 2023/8/28 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC IDMSQ-RTBE6M00 To Whom It May Concern:

We, ASUSTeK COMPUTER INC., attest that this device under FCC ID MSQ-RTBE6M00 complies with device protocol requirements and operational restrictions:

1. Protocol attestation statement:

a. This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. b. Once under control of an indoor access point, a subordinate will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling the subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6PP. c. An 11ax IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. 2. Statement acknowledging device restrictions:

a. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. c. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. d. When configured for subordinate mode, this device has no direct connection to the internet. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6816430.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan TPC Declaration Letter Date: 2023/8/28 FCC IDMSQ-RTBE6M00 To Whom It May Concern:

We, ASUSTeK COMPUTER INC., declare that the device supports the TPC function in final F/W when EUT is sold to FCC market. Respectfully, Applicants company name

: ASUSTeK COMPUTER INC. Applicants company address

: 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature Name and Job Title E-Mail Tel Fax

Jackson Yen / Associate Vice President Jackson_Yen@asus.com

(886)2-2894-3447

(886)2-2898-7364