happy holidays!

FCC ID: MSQAX211D2 Intel Wi-Fi 6E AX211

by: ASUSTeK Computer Inc latest update: 2024-08-30 model: AX211D2

One Hundred And Twelve grants have been issued under this FCC ID from 08/19/2021 to 08/30/2024 (this is one of two hundred and eighty-four releases in 2024 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, troubleshooting guides, drivers, warrantee terms, & instructions.
permalink for this FCC identifier
product lifecycle: recent release
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual 20231116 Users Manual pdf 1.34 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Inpho Part1 Internal Photos pdf 4.74 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Inpho Part2 Internal Photos pdf 2.38 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Expho External Photos pdf 1.78 MiB November 30 2023 / May 29 2024 delayed release
various EUT Photo AX211D2W External Photos pdf 81.17 KiB May 19 2023 / June 01 2023
various LABEL location ID Label/Location Info pdf 124.18 KiB March 13 2024 / March 19 2024
various Label ID Label/Location Info pdf 239.61 KiB December 19 2023 / December 26 2023
various Label Location AX211D2W ID Label/Location Info pdf 53.35 KiB May 19 2023 / June 01 2023
various Label Marking FCC IC ID Label/Location Info pdf 5.00 MiB March 13 2024 / March 19 2024
various Label of AX211D2W ID Label/Location Info pdf 410.37 KiB May 19 2023 / June 01 2023
various AX211D2W- Appendix A System Check Data RF Exposure Info pdf 599.12 KiB March 13 2024 / March 19 2024
various AX211D2W- Appendix B Highest Measurement Data-Plot No. RF Exposure Info pdf 805.35 KiB March 13 2024 / March 19 2024
various AX211D2W- Appendix D Proble Calibration RF Exposure Info pdf 3.00 MiB March 13 2024 / March 19 2024
various AX211D2W- Appendix E Dipole and Source Calibration RF Exposure Info pdf 2.86 MiB March 13 2024 / March 19 2024
various AX211D2W- Class II Change s Cover Letter(s) pdf 150.00 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC IC Request for Confidentiality ok Cover Letter(s) pdf 172.08 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC IC Declaration of authorization ok Cover Letter(s) pdf 92.22 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC UNII Declaration letter ok Cover Letter(s) pdf 194.41 KiB March 13 2024 / March 19 2024
various AX211D2W- TestRpt SAR RF Exposure Info pdf 1.39 MiB March 13 2024 / March 19 2024
various AX211D2W-FCC Covered List Attestation Letter ok Attestation Statements pdf 236.70 KiB March 13 2024 / March 19 2024
various Attestation Statements pdf December 01 2023
various Antenna Report Test Report pdf 1.54 MiB March 07 2024 / March 19 2024
various Confidential Block Diagram Block Diagram pdf March 07 2024 confidential
various Confidential Operational Description Operational Description pdf March 07 2024 confidential
various Confidential Schematics Schematics pdf March 07 2024 confidential
various TempConfidential AX211D2W- Expho External Photos pdf March 07 2024 / September 15 2024 delayed release
various TempConfidential AX211D2W- Inpho Part1 Internal Photos pdf March 07 2024 / September 15 2024 delayed release
various TempConfidential AX211D2W- Inpho Part2 Internal Photos pdf March 07 2024 / September 15 2024 delayed release
various TempConfidential AX211D2W- Tsup Test Setup Photos pdf March 07 2024 / September 15 2024 delayed release
various TempConfidential User Manual Users Manual pdf March 07 2024 / September 15 2024 delayed release
various AX211D2W- FCC UNII Declaration letter ok SDR Software/Security Inf pdf March 18 2024 confidential
various AX211D2W- Appendix B Highest Measurement Data RF Exposure Info pdf 838.56 KiB March 18 2024
various AX211D2W- Appendix D Probe Calibration RF Exposure Info pdf 4.30 MiB March 18 2024
various AX211D2W- TestRpt SAR -0307 RF Exposure Info pdf 1.61 MiB March 18 2024
various TempConfidential AX211D2W- ExtPho External Photos pdf March 18 2024 / September 14 2024 delayed release
various TempConfidential AX211D2W- IntPho Internal Photos pdf March 18 2024 / September 14 2024 delayed release
various TempConfidential AX211D2W- Tsup SAR Test Setup Photos pdf March 18 2024 / September 14 2024 delayed release
various 210504 DPCSA Op Report FCC AX201D2W Rev04 Operational Description pdf January 04 2024 confidential
various ASUS DPCSA LoA FCC ATCB031218 Cover Letter(s) pdf 377.78 KiB January 04 2024 / March 18 2024
various AX211D2W- Appendix A System Check Data 20231130 RF Exposure Info pdf 916.27 KiB January 04 2024 / March 18 2024
various AX211D2W- Class II Change v2 signed Cover Letter(s) pdf 90.78 KiB January 04 2024 / March 18 2024
various AX211D2W- FCC IC Request for Confidentiality v1 s Cover Letter(s) pdf 170.73 KiB January 04 2024 / March 18 2024
various AX211D2W- TestRpt SAR 20231130 RF Exposure Info pdf 1.37 MiB November 30 2023 / December 01 2023
various RF Exposure Info pdf January 25 2024 / March 18 2024
various RF Exposure Info pdf February 18 2024 / March 18 2024
various AX211D2W- TestRpt SAR 20240308 RF Exposure Info pdf 1.38 MiB March 11 2024 / March 18 2024
various Cover Letter(s) pdf February 18 2024 / March 18 2024
various FCC DoC UX3405M-revised Cover Letter(s) pdf 166.33 KiB March 09 2024 / March 18 2024
various Intel DPCSA Declaration - RevC Cover Letter(s) pdf 176.42 KiB January 04 2024 / March 18 2024
various TempConfidential AX211D2W- Tsup 20231130 Test Setup Photos pdf January 04 2024 / September 14 2024 delayed release
various TempConfidential AX211D2W- Tsup 20240123 Test Setup Photos pdf January 25 2024 / September 14 2024 delayed release
various TempConfidential User Manual 1116 Users Manual pdf January 04 2024 / September 14 2024 delayed release
various UX3405M AX211D2W- TestRpt FCC WLAN Intel TAS Test Report pdf 414.87 KiB January 04 2024 / March 18 2024
various RF Exposure Info pdf February 18 2024 / March 18 2024
various Confidential Block Diagram Block Diagram pdf March 18 2024 confidential
various Attestation Statements Part2.911(d)(5) Attestation Statements pdf 187.23 KiB December 19 2023 / December 26 2023
various Attestation Statements Part2.911(d)(7) Attestation Statements pdf 429.26 KiB December 19 2023 / December 26 2023
various C2PC letter Cover Letter(s) pdf 220.92 KiB December 19 2023 / December 26 2023
various Confidentiality Request Letter Cover Letter(s) pdf 217.66 KiB December 19 2023 / December 26 2023
various E22299 UX8406MA EM draft4 Users Manual pdf December 19 2023 / June 16 2024 delayed release
various E22300 UX8406MA UM 32pages PRINT Users Manual pdf December 19 2023 / June 16 2024 delayed release
various External photo External Photos pdf December 19 2023 / June 16 2024 delayed release
various Internal Photo Internal Photos pdf December 19 2023 / June 16 2024 delayed release
various Models Difference DescriptionLetter Cover Letter(s) pdf 215.30 KiB December 19 2023 / December 26 2023
various Power of Attorney Letter Cover Letter(s) pdf 223.42 KiB December 19 2023 / December 26 2023
various Tsup SAR Test Setup Photos pdf December 19 2023 / June 16 2024 delayed release
various USSC23N007001 AppendixA RF Exposure Info pdf 598.32 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixB RF Exposure Info pdf 467.69 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixC RF Exposure Info pdf 480.49 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixD-1 RF Exposure Info pdf 4.38 MiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixD-2 RF Exposure Info pdf 4.05 MiB December 19 2023 / December 26 2023
various USSC23N007001 SAR RF Exposure Info pdf 1.48 MiB December 19 2023 / December 26 2023
various WIFI AUX datasheet Design Operational Description pdf December 19 2023 confidential
various WIFI AUX datasheet Gain Test Report pdf 1.28 MiB December 19 2023 / December 26 2023
various WIFI AUX datasheet photo Internal Photos pdf December 19 2023 / June 16 2024 delayed release
various WIFI MAIN datasheet Design Operational Description pdf December 19 2023 confidential
various WIFI MAIN datasheet Gain Test Report pdf 1.37 MiB December 19 2023 / December 26 2023
various WIFI MAIN datasheet photo Internal Photos pdf December 19 2023 / June 16 2024 delayed release
various AX211D2W- Class II Change 1201 ok Cover Letter(s) pdf 149.39 KiB December 01 2023
various AX211D2W- Tsup 20231130 Test Setup Photos pdf 480.36 KiB November 30 2023 / May 29 2024 delayed release
various Antenna Report AUX Test Report pdf 1.27 MiB November 30 2023 / December 01 2023
various Antenna Report MAIN Test Report pdf 1.49 MiB November 30 2023 / December 01 2023
various 220210 ASUS DPCSA LoA Cover Letter(s) pdf 162.09 KiB May 19 2023 / June 01 2023
various ASUS FCC Covered List Attestation Letter signed Attestation Statements pdf 133.88 KiB May 19 2023 / June 01 2023
various ASUS FCC U.S. Agent Designation Attestation Letter signed Attestation Statements pdf 207.64 KiB May 19 2023 / June 01 2023
various AX211D2W- Class II Change s 0321 ok Cover Letter(s) pdf 133.43 KiB May 19 2023 / June 01 2023
various AX211D2W-Request for Confidentiality s Cover Letter(s) pdf 196.64 KiB May 19 2023 / June 01 2023
various Declaration of authorization singed Cover Letter(s) pdf 185.21 KiB May 19 2023 / June 01 2023
various FCC DOC 0329 Cover Letter(s) pdf 114.92 KiB May 19 2023 / June 01 2023
various FCC Rep A ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 766.85 KiB May 19 2023 / June 01 2023
various FCC Rep A ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 917.15 KiB May 19 2023 / June 01 2023
various FCC Rep A RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 589.56 KiB May 19 2023 / June 01 2023
various FCC Rep A RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000323ES 202 RF Exposure Info pdf 691.94 KiB May 19 2023 / June 01 2023
various FCC Rep B ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 2.46 MiB May 19 2023 / June 01 2023
various FCC Rep B ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 2.77 MiB May 19 2023 / June 01 2023
various FCC Rep B RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 3.80 MiB May 19 2023 / June 01 2023
various FCC Rep B RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000323ES 202 RF Exposure Info pdf 5.22 MiB May 19 2023 / June 01 2023
various FCC Rep C ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 781.40 KiB May 19 2023 / June 01 2023
various FCC Rep C ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 715.31 KiB May 19 2023 / June 01 2023
various FCC Rep C RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 2.24 MiB May 19 2023 / June 01 2023
various GZ301V- TestRpt TAS 20230310 Test Report pdf 530.15 KiB May 19 2023 / June 01 2023
various User Manual 20231116 Users Manual pdf 1.34 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Inpho Part1 Internal Photos pdf 4.74 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Inpho Part2 Internal Photos pdf 2.38 MiB November 30 2023 / May 29 2024 delayed release
various AX211D2W- Expho External Photos pdf 1.78 MiB November 30 2023 / May 29 2024 delayed release
various EUT Photo AX211D2W External Photos pdf 81.17 KiB May 19 2023 / June 01 2023
various LABEL location ID Label/Location Info pdf 124.18 KiB March 13 2024 / March 19 2024
various Label ID Label/Location Info pdf 239.61 KiB December 19 2023 / December 26 2023
various Label Location AX211D2W ID Label/Location Info pdf 53.35 KiB May 19 2023 / June 01 2023
various Label Marking FCC IC ID Label/Location Info pdf 5.00 MiB March 13 2024 / March 19 2024
various Label of AX211D2W ID Label/Location Info pdf 410.37 KiB May 19 2023 / June 01 2023
various AX211D2W- Appendix A System Check Data RF Exposure Info pdf 599.12 KiB March 13 2024 / March 19 2024
various AX211D2W- Appendix B Highest Measurement Data-Plot No. RF Exposure Info pdf 805.35 KiB March 13 2024 / March 19 2024
various AX211D2W- Appendix D Proble Calibration RF Exposure Info pdf 3.00 MiB March 13 2024 / March 19 2024
various AX211D2W- Appendix E Dipole and Source Calibration RF Exposure Info pdf 2.86 MiB March 13 2024 / March 19 2024
various AX211D2W- Class II Change s Cover Letter(s) pdf 150.00 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC IC Request for Confidentiality ok Cover Letter(s) pdf 172.08 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC IC Declaration of authorization ok Cover Letter(s) pdf 92.22 KiB March 13 2024 / March 19 2024
various AX211D2W- FCC UNII Declaration letter ok Cover Letter(s) pdf 194.41 KiB March 13 2024 / March 19 2024
various AX211D2W- TestRpt SAR RF Exposure Info pdf 1.39 MiB March 13 2024 / March 19 2024
various AX211D2W-FCC Covered List Attestation Letter ok Attestation Statements pdf 236.70 KiB March 13 2024 / March 19 2024
various Attestation Statements pdf December 01 2023
various Antenna Report Test Report pdf 1.54 MiB March 07 2024 / March 19 2024
various AX211D2W- Appendix B Highest Measurement Data RF Exposure Info pdf 838.56 KiB March 18 2024
various AX211D2W- Appendix D Probe Calibration RF Exposure Info pdf 4.30 MiB March 18 2024
various AX211D2W- TestRpt SAR -0307 RF Exposure Info pdf 1.61 MiB March 18 2024
various ASUS DPCSA LoA FCC ATCB031218 Cover Letter(s) pdf 377.78 KiB January 04 2024 / March 18 2024
various AX211D2W- Appendix A System Check Data 20231130 RF Exposure Info pdf 916.27 KiB January 04 2024 / March 18 2024
various AX211D2W- Class II Change v2 signed Cover Letter(s) pdf 90.78 KiB January 04 2024 / March 18 2024
various AX211D2W- FCC IC Request for Confidentiality v1 s Cover Letter(s) pdf 170.73 KiB January 04 2024 / March 18 2024
various AX211D2W- TestRpt SAR 20231130 RF Exposure Info pdf 1.37 MiB November 30 2023 / December 01 2023
various AX211D2W- TestRpt SAR 20240308 RF Exposure Info pdf 1.38 MiB March 11 2024 / March 18 2024
various FCC DoC UX3405M-revised Cover Letter(s) pdf 166.33 KiB March 09 2024 / March 18 2024
various Intel DPCSA Declaration - RevC Cover Letter(s) pdf 176.42 KiB January 04 2024 / March 18 2024
various UX3405M AX211D2W- TestRpt FCC WLAN Intel TAS Test Report pdf 414.87 KiB January 04 2024 / March 18 2024
various Attestation Statements Part2.911(d)(5) Attestation Statements pdf 187.23 KiB December 19 2023 / December 26 2023
various Attestation Statements Part2.911(d)(7) Attestation Statements pdf 429.26 KiB December 19 2023 / December 26 2023
various C2PC letter Cover Letter(s) pdf 220.92 KiB December 19 2023 / December 26 2023
various Confidentiality Request Letter Cover Letter(s) pdf 217.66 KiB December 19 2023 / December 26 2023
various Models Difference DescriptionLetter Cover Letter(s) pdf 215.30 KiB December 19 2023 / December 26 2023
various Power of Attorney Letter Cover Letter(s) pdf 223.42 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixA RF Exposure Info pdf 598.32 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixB RF Exposure Info pdf 467.69 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixC RF Exposure Info pdf 480.49 KiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixD-1 RF Exposure Info pdf 4.38 MiB December 19 2023 / December 26 2023
various USSC23N007001 AppendixD-2 RF Exposure Info pdf 4.05 MiB December 19 2023 / December 26 2023
various USSC23N007001 SAR RF Exposure Info pdf 1.48 MiB December 19 2023 / December 26 2023
various WIFI AUX datasheet Gain Test Report pdf 1.28 MiB December 19 2023 / December 26 2023
various WIFI MAIN datasheet Gain Test Report pdf 1.37 MiB December 19 2023 / December 26 2023
various AX211D2W- Class II Change 1201 ok Cover Letter(s) pdf 149.39 KiB December 01 2023
various AX211D2W- Tsup 20231130 Test Setup Photos pdf 480.36 KiB November 30 2023 / May 29 2024 delayed release
various Antenna Report AUX Test Report pdf 1.27 MiB November 30 2023 / December 01 2023
various Antenna Report MAIN Test Report pdf 1.49 MiB November 30 2023 / December 01 2023
various 220210 ASUS DPCSA LoA Cover Letter(s) pdf 162.09 KiB May 19 2023 / June 01 2023
various ASUS FCC Covered List Attestation Letter signed Attestation Statements pdf 133.88 KiB May 19 2023 / June 01 2023
various ASUS FCC U.S. Agent Designation Attestation Letter signed Attestation Statements pdf 207.64 KiB May 19 2023 / June 01 2023
various AX211D2W- Class II Change s 0321 ok Cover Letter(s) pdf 133.43 KiB May 19 2023 / June 01 2023
various AX211D2W-Request for Confidentiality s Cover Letter(s) pdf 196.64 KiB May 19 2023 / June 01 2023
various Declaration of authorization singed Cover Letter(s) pdf 185.21 KiB May 19 2023 / June 01 2023
various FCC DOC 0329 Cover Letter(s) pdf 114.92 KiB May 19 2023 / June 01 2023
various FCC Rep A ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 766.85 KiB May 19 2023 / June 01 2023
various FCC Rep A ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 917.15 KiB May 19 2023 / June 01 2023
various FCC Rep A RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 589.56 KiB May 19 2023 / June 01 2023
various FCC Rep A RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000323ES 202 RF Exposure Info pdf 691.94 KiB May 19 2023 / June 01 2023
various FCC Rep B ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 2.46 MiB May 19 2023 / June 01 2023
various FCC Rep B ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 2.77 MiB May 19 2023 / June 01 2023
various FCC Rep B RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 3.80 MiB May 19 2023 / June 01 2023
various FCC Rep B RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000323ES 202 RF Exposure Info pdf 5.22 MiB May 19 2023 / June 01 2023
various FCC Rep C ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000536ES 2 RF Exposure Info pdf 781.40 KiB May 19 2023 / June 01 2023
various FCC Rep C ASUS GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2211000537ES 2 RF Exposure Info pdf 715.31 KiB May 19 2023 / June 01 2023
various FCC Rep C RF GZ301V SAR IEEEANSI C95.1-1992, IEEE 1528-2013 TESA2208000320ES 202 RF Exposure Info pdf 2.24 MiB May 19 2023 / June 01 2023
various GZ301V- TestRpt TAS 20230310 Test Report pdf 530.15 KiB May 19 2023 / June 01 2023

frequency equipment class purpose
1 2024-08-30 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II permissive change or modification of presently authorized equipment
2 2422 ~ 2462 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 2024-08-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
6 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
7 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
8 2422 ~ 2462 DTS - Digital Transmission System
9 2024-07-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2422 ~ 2462 DTS - Digital Transmission System
11 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
12 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
13 2024-06-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2422 ~ 2462 DTS - Digital Transmission System
15 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
16 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
17 2024-03-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 2422 ~ 2462 DTS - Digital Transmission System
19 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
20 2024-03-18 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
21 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
22 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
23 2422 ~ 2462 DTS - Digital Transmission System
24 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
27 2422 ~ 2462 DTS - Digital Transmission System
28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
29 2023-12-26 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
30 2422 ~ 2462 DTS - Digital Transmission System
31 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
32 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
33 2023-12-01 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
34 2422 ~ 2462 DTS - Digital Transmission System
35 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
36 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
37 2023-06-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
38 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
39 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
40 2422 ~ 2462 DTS - Digital Transmission System
41 2023-03-06 2422 ~ 2462 DTS - Digital Transmission System
42 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
43 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
44 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
45 2023-02-14 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
46 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II permissive change or modification of presently authorized equipment
47 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
48 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
49 2023-01-18 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
50 2022-12-06 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
51 2022-11-30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
52 2422 ~ 2462 DTS - Digital Transmission System
53 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
54 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
55 2022-07-08 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
56 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
57 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
58 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
59 2022-06-20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
60 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
61 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
62 2422 ~ 2462 DTS - Digital Transmission System
63 2022-06-02 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
64 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
65 2022-06-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 2422 ~ 2462 DTS - Digital Transmission System
67 2022-05-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
68 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
69 2422 ~ 2462 DTS - Digital Transmission System
70 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
71 2022-05-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
72 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
73 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
74 2422 ~ 2462 DTS - Digital Transmission System
75 2022-05-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
76 2422 ~ 2462 DTS - Digital Transmission System
77 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
78 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
79 2022-04-24 2422 ~ 2462 DTS - Digital Transmission System
80 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
81 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
82 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
83 2022-04-18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
84 2422 ~ 2462 DTS - Digital Transmission System
85 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
86 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
87 2022-04-06 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
88 2022-03-04 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
89 2422 ~ 2462 DTS - Digital Transmission System
90 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
92 2022-02-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
93 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
94 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
95 2422 ~ 2462 DTS - Digital Transmission System
96 2022-02-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
97 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
98 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
99 2422 ~ 2462 DTS - Digital Transmission System
100 2022-01-04 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
101 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
102 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
103 2422 ~ 2462 DTS - Digital Transmission System
104 2021-12-29 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
105 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
106 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
107 2422 ~ 2462 DTS - Digital Transmission System
108 2021-08-19 2422 ~ 2462 DTS - Digital Transmission System Change in Identification
109 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
110 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
111 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
112 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2024-08-30
various 2024-08-15
various 2024-07-16
various 2024-06-10
various 2024-03-19
various 2024-03-18
various 2023-12-26
various 2023-12-01
various 2023-06-01
various 2023-03-06
various 2023-02-14
various 2023-01-18
various 2022-12-06
various 2022-11-30
various 2022-07-08
various 2022-06-20
various 2022-06-02
various 2022-06-01
various 2022-05-13
various 2022-05-11
various 2022-05-06
various 2022-04-24
various 2022-04-18
various 2022-04-06
various 2022-03-04
various 2022-02-24
various 2022-02-23
various 2022-01-04
various 2021-12-29
various 2021-08-19
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various 0022229074
various 0005819321
various Physical Address 1F, No. 15, Lide Rd.
various Beitou, Taipei, N/A 112
various Beitou, Taipei, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various b******@phoenix-testlab.de
various v******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code AX211D2
app s Person at the applicant's address to receive grant or for contact
various Name J****** Y********
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various Eurofins E&E Wireless Taiwan Co., Ltd.
various DEKRA
various SGS Taiwan Ltd.
various ASUSTeK COMPUTER INC.
various Bureau Veritas Consumer Products Services (H.K.)
various A Test Lab Techno Corp
various Name K****** L******
various F**** L******
various C******** P********
various J**** W********
various J******
various J****** C****
various J**** Y******
various K**** L******
various F****** Y********
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 140-1, Changan Street, Bade District
various No. 134, Wu Kung Rd., New Taipei Industrial Park
various No. 85, Wenlin St., Linkou Dist.
various 11F., No. 15, Lide Rd., Beitou Dist.
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil. Kwei Shan Dist
various New Taipei City
various New Taipei City, 24451
various Taoyuan City
various New Taipei City, 24803
various Taipei, 112
various Taoyuan
various Taiwan
various Telephone Number 886-2********
various 28601********
various 886-3********
various +8862********
various 886-2********
various 886 2********
various +8862********
various +8862********
various 886 3********
various Fax Number 886-2********
various E-mail k******@dekra.com
various f******@cpt.eurofinsasia.com
various j******@dekra.com
various j******@sgs.com
various c******@dekra.com
various j******@asus.com
various k******@bureauveritas.com
various f******@dekra.com
various f******@atl-lab.com.tw
app s Non Technical Contact
various Firm Name ASUSTeK COMPUTER INC.
various Name J****** Y****
various Physical Address 11F., No. 15, Lide Rd., Beitou Dist.
various Taipei, 112
various Taiwan
various Telephone Number +8862********
various E-mail j******@asus.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)02/26/2025
various02/12/2025
various09/15/2024
various09/14/2024
various06/16/2024
various05/29/2024
various09/03/2023
various08/13/2023
various07/18/2023
various05/29/2023
various01/04/2023
various12/17/2022
various12/16/2022
various12/13/2022
various11/01/2022
various10/19/2022
various10/16/2022
various08/30/2022
various08/23/2022
various06/29/2022
various01/07/2022
various10/26/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment Class6XD - 15E 6 GHz Low Power Indoor Client
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6E AX211
variousWLAN and BT, 2x2 PCle M.2 1216 SD adapter card
variousSingle Modular Approval
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.35 W/kg respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.35 W/kg respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.35 W/kg respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or anew application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values for are 1.10 W/kg and 1.35 W/kg respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category-specific host of ASUS NotebookPC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200). The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.26 W/kg respectively. Enabling TAS feature to 2.4GHz and 5GHz WLAN transmitters.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40,80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category-specific host of ASUS NotebookPC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200). The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.26 W/kg respectively. Enabling TAS feature to 2.4GHz and 5GHz WLAN transmitters.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. ModularApproval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, and 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category-specific host of ASUS NotebookPC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200). The highest reported Body and Simultaneous SAR values are 1.11 W/kg and1.11 W/kg respectively. Enabling TAS feature to 2.4 GHz and 5 GHz WLAN transmitters.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna (s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category-specific host of ASUS NotebookPC, model number: S5406M, K5406M, V5406M, and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200). The highest reported Body and Simultaneous SAR values are 0.54 W/kg and1.05 W/kg respectively. Enabling TAS feature to 2.4GHz and 5GHz WLAN transmitters.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 1400805930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.13 W/kg and 0.79 W/kg at 1g tissues, respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 1400805930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.67 W/kg and 0.79 W/kg at 1g tissues, respectively. WLAN TAS feature enabled.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 1400805930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.34 W/kg and 0.79 W/kg at 1g tissues, respectively. The highest reported power density is 5.12 W/cm. WLAN TAS feature enabled.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.64W/kg and1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number:UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 1400805930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.67 W/kg and 0.79 W/kg at 1g tissues, respectively. WLAN TAS feature enabled.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. C2PC filing to establish conditions based on modular stand-alone SAR evaluation @ 5 mm antenna (SkyCrossreference Antenna with PIFA type) to user separation distance at a minimum SAR value less than 0.8 W/kg (1g) for mixed mobile/portable categories. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi- transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. C2PC filing to establish conditions based on modular stand-alone SAR evaluation @ 5 mm antenna (SkyCross reference PIFA Antenna) to user separation distance at a minimum SAR value less than 0.8 W/kg (1g) for mixed mobile/portable categories. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. ModularApproval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying withFCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.64W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. C2PC filing to establish conditions based on modular stand-alone SAR evaluation @ 5 mm antenna (SkyCross reference PIFA Antenna) to user separation distance at a minimum SAR value less than 0.8 W/kg (1g) for mixed mobile/portable categories. The highest reported Body and Simultaneous SAR values are0.68 W/kg and 1.35 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80and160 MHz BW modes. C2PC filing to establish conditions based on modular stand-alone SAR evaluation @ 5 mm antenna (Intel Antenna with PIFA type) to user separation distance at a minimum SAR value less than 0.8 W/kg (1g) for mixed mobile/portable categories. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.02 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200).The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.26 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200).The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.05 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200).The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.11 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40,80 and 160 MHz BW modes. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: S5406M, K5406M, V5406M and P5406CM with the antenna Luxshare-ICT, part no. LA9RF568-CS-H (14008-06000300) and LA9RF569-CS-H (14008-06000200). The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.26 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or anew application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values for are 1.10 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values for are 0.73 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 0.81 W/kg and 1.45 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 0.24 W/kg and 1.45 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: S5506M, K5506M, V5506M, P5506CM, S5606M, K5606M, V5606M and P5606CM with the antenna Luxshare-ICT, part no. LA9RF570-CS-H (part no of ASUS: 4008-05990300) and LA9RF571-CS-H (part no of ASUS: 14008-05990200). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.35 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.64W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 14008 05930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.67 W/kg and 0.79 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 14008 05930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.67 W/kg and 0.79 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 14008 05930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.34 W/kg and 0.79 W/kg at 1g tissues, respectively. The highest reported power density is 5.12 W/cm.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX8406M, BX8406M, RX8406M; Brand: ASUS, with antennas Pulse, model no.: 14008 05930100. And Pulse, model no.: 14008 05930000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.13 W/kg and 0.79 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.81 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values for are 0.73 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: UX3405M, BX3405M, RX3405M, Q415M and Q425M with the antenna PULSE, part no. TZ2709D (part no of ASUS: 14008-05740200) and TZ2709E (part no of ASUS: 14008-05740100). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.24 W/kg and 1.45 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V, GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 1.44 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V, GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values for are 0.51 W/kg and 1.30 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V, GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.51 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V, GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. WLAN TAS feature enabled. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.43 W/kg, respectively. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402V, RX8402V, BX8402V, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.43 W/kg, respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402V, RX8402V, BX8402V, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.10 W/kg and 1.29 W/kg, respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402V, RX8402V, BX8402V, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.10 W/kg and 1.29 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.26 W/kg and 1.41 W/kg, respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402V, RX8402V, BX8402V, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.26 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.84 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX5304V, BX5304V, RX5304V; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-01-031 and WA-P-LE-02-125. And AWAN, model no.: AYP6Y-100374 and AYP6Y-100373. <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.14 W/kg and 1.10 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.53 W/kg respectively. The highest reported power density is 0.52 mW/cm2 This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX5304V, BX5304V, RX5304V; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-01-031 and WA-P-LE-02-125. And AWAN, model no.: AYP6Y-100374 and AYP6Y-100373. <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.53 W/kg and 1.16 W/kg at 1g tissues, respectively. The highest reported power density is 0.51 mW/cm2
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.53 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX5304V, BX5304V, RX5304V; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-01-031 and WA-P-LE-02-125. And AWAN, model no.: AYP6Y-100374 and AYP6Y-100373. <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.63 W/kg and 1.57 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.21 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UX5304V, BX5304V, RX5304V; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-01-031 and WA-P-LE-02-125. And AWAN, model no.: AYP6Y-100374 and AYP6Y-100373. <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.16 W/kg and 1.57 W/kg at 1g tissues, respectively
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. ModularApproval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying withFCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V, GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values for are 0.51 W/kg and 1.59 W/kg respectively.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. ModularApproval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying withFCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.64W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V,GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.50 W/kg and 1.30 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V,GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V,GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 1.44 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x2MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS GZ301VI, GZ301VV, GZ301VU, GZ301VJ, GZ301VF, GZ301V,GZ301VIC, GZ301VVC, GZ301VUC, GZ301VJC and GZ301VFC with the antenna ASAP, part no. LA9RF399-CS-H and LA9RF400-CS-H/ INPAQ, part no. MDA-LE-01-005 and MDA-LE-02-013. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.51 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. <br> The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. <br> OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. <br> The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.84 W/kg respectively. <br> This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. <br> SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: B5302FB and B5302CB; Brand: ASUS, with antennas AWAN, model no.: C-AYP6Y-C7-00 (HQ20604914000) and C-AYP6Y-C7-01 (HQ20604913000). And ZTX, model no.: 2.00005365 (HQ20604915000) and 2.00005366 (HQ20604924000). <br> <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.84 W/kg and 1.30 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. <br> When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.21 W/kg respectively. <br> This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. <br> SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: B5302FB and B5302CB; Brand: ASUS, with antennas AWAN, model no.: C-AYP6Y-C7-00 (HQ20604914000) and C-AYP6Y-C7-01 (HQ20604913000). And ZTX, model no.: 2.00005365 (HQ20604915000) and 2.00005366 (HQ20604924000). <br> <br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.03 W/kg and 1.18 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.53 W/kg respectively. The highest reported power density is 0.52 mW/cm2 This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: B5302FB and B5302CB; Brand: ASUS, with antennas AWAN, model no.: C-AYP6Y-C7-00 (HQ20604914000) and C-AYP6Y-C7-01 (HQ20604913000). And ZTX, model no.: 2.00005365 (HQ20604915000) and 2.00005366 (HQ20604924000). SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.02 W/kg and 1.17 W/kg at 1g tissues, respectively. The highest reported power density is 0.99 mW/cm2
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.53 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: B5302FB and B5302CB; Brand: ASUS, with antennas AWAN, model no.: C-AYP6Y-C7-01 (HQ20604913000). And ZTX, model no.: 2.00005366 (HQ20604924000). SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.15 W/kg and 1.18 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the ASUS model UP5302Z, BP5302Z, RP5302Z PC with INPAQ 14008-05130200 and 14008-05130300 and AWAN AYP6Y-100322 and AYP6Y-100323 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the ASUS model UP5302Z, BP5302Z, RP5302Z PC with INPAQ 14008-05130200 and 14008-05130300 and AWAN AYP6Y-100322 and AYP6Y-100323 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.59 W/kg respectively. This change establishes portable category SAR conditions for the ASUS model UP5302Z, BP5302Z, RP5302Z PC with INPAQ 14008-05130200 and 14008-05130300 and AWAN AYP6Y-100322 and AYP6Y-100323 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the ASUS model UP5302Z, BP5302Z, RP5302Z PC with INPAQ 14008-05130200 and 14008-05130300 and AWAN AYP6Y-100322 and AYP6Y-100323 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure along with the NFC module (FCC ID: MSQ-NFCAWM001) co-location in the host of ASUS Portable Computer, model: B7402FB, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.76 W/kg and 1.12 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure along with the NFC module (FCC ID: MSQ-NFCAWM001) co-location in the host of ASUS Portable Computer, model: B7402FB, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.92 W/kg and 1.28 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the NFC module (FCC ID: MSQ-NFCAWM001) co-location in the host of ASUS Portable Computer, model: B7402FB, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.36 W/kg and 1.54 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure along with the NFC module (FCC ID: MSQ-NFCAWM001) co-location in the host of ASUS Portable Computer, model: B7402FB, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.54 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 1.24 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.24 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.85 W/kg and 1.24 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2402CBA, B2402CB, P2452CB, PX460CB, BW460CB, B2402FBA, B2402FB, P2452FB, PX460FB and BW460FB with the antenna PULSE, part no. 1415-090S0A9 (TZ2109C) and 1415-090T0A9 (TZ2109E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.24 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.27 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B2502CB, B2502CBA, P2552CB, PX560CB, BW560CB, B2502FB, B2502FBA, P2552FB, PX560FB and BW560FB with the antenna PULSE, part no. 1415-08YL0A9 (TZ2112C) and 1415-08YM0A9 (TZ2112E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.53 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UP5302Z, RP5302Z, BP5302Z; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-01-011. And AWAN, model no.: AYP6Y-100323. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.73 W/kg and 1.59 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.84 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UP5302Z, RP5302Z, BP5302Z; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-02-072 and WA-P-LE-01-011. And AWAN, model no.: AYP6Y-100322 and AYP6Y-100323. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.20 W/kg and 1.59 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.53 W/kg respectively. The highest reported power density is 0.52 mW/cm2 This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UP5302Z, RP5302Z, BP5302Z; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-02-072 and WA-P-LE-01-011. And AWAN, model no.: AYP6Y-100322 and AYP6Y-100323. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.80 W/kg and 1.59 W/kg at 1g tissues, respectively. The highest reported power density is 0.50 mW/cm2
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.21 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook PC, model number: UP5302Z, RP5302Z, BP5302Z; Brand: ASUS, with antennas INPAQ, model no.: WA-P-LE-02-072 and WA-P-LE-01-011. And AWAN, model no.: AYP6Y-100322 and AYP6Y-100323. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.93 W/kg and 1.59 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.84 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX9702A, BX9702A, RX9702A, UX9702AA; Brand: ASUS, with antennas INPAQ, model no.: MDA-LE-01-004 and MDA-LE-02-009. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.12 W/kg and 1.58 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.21 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX9702A, BX9702A, RX9702A, UX9702AA; Brand: ASUS, with antennas INPAQ, model no.: MDA-LE-01-004 and MDALE- 02-009. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.18 W/kg and 1.26 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.53 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX9702A, BX9702A, RX9702A, UX9702AA; Brand: ASUS, with antenna INPAQ, model no.: MDA-LE-02-009. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are &lt; 0.10 W/kg and 1.48 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.53 W/kg respectively. The highest reported power density is 0.52 mW/cm2 This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX9702A, BX9702A, RX9702A, UX9702AA; Brand: ASUS, with antennas INPAQ, model no.: MDA-LE-01-004 and MDA-LE-02-009. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.95 W/kg and 1.48 W/kg at 1g tissues, respectively. The highest reported power density is 0.24 mW/cm2.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.43 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.10 W/kg and 1.29 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UX8402Z, RX8402Z, BX8402Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.26 W/kg and 1.41 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80and160 MHz BW modes. Class II Permissive Change: Update the Contention Based Protocol test with the lower antenna gain as documented in the filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.21 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: H7600Z, J7600Z, and W7600Z; Brand: ASUS, with antennas INPAQ, model no.: 14008-05000000 and 14008-05000100. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.06 W/kg and 1.23 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.84 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: H7600Z, J7600Z, and W7600Z; Brand: ASUS, with antennas INPAQ, model no.: 14008-05000000 and 14008-05000100. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.50 W/kg and 0.81 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.53 W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: H7600Z, J7600Z, and W7600Z; Brand: ASUS, with antenna INPAQ, model no.: 14008-05000000. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.17 W/kg and 1.29 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.53 W/kg respectively. The highest reported power density is 0.52 mW/cm2 This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: H7600Z, J7600Z, and W7600Z; Brand: ASUS, with antennas INPAQ, model no.: 14008-05000000 and 14008-05000100. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.12 W/kg and 1.29 W/kg at 1g tissues, respectively. The highest reported power density is 0.54 mW/cm2
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX7602Z, BX7602Z, and RX7602Z; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100011. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.34 W/kg and 1.53 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX7602Z, BX7602Z, and RX7602Z; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100011, AYL6Y-100010, and AYL6Y-100012. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.19 W/kg and 1.53 W/kg at 1g tissues, respectively. The highest reported power density is 0.52 mW/cm2
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX7602Z, BX7602Z, and RX7602Z; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100011, AYL6Y-100010, and AYL6Y-100012. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.09 W/kg and 1.43 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX7602Z, BX7602Z, and RX7602Z; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100011, AYL6Y-100010, and AYL6Y-100012. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.03 W/kg and 1.27 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UP6502Z, Q529Z, Q539Z, RP6502Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.32 W/kg and 1.40 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UP6502Z, Q529Z, Q539Z, RP6502Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UP6502Z, Q529Z, Q539Z, RP6502Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.44 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: UP6502Z, Q529Z, Q539Z, RP6502Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.90 W/kg and 1.39 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance.<br> SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX5400Z, BX5400Z, RX5400Z, P5400Z, and P5400CZ; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100008 and AYL6Y-100007 and LUXSHARE-ICT, model no.: LA9RF353-CS-H and LA9RF352-CS-H.<br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.14 W/kg and 1.21 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively.<br> This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX5400Z, BX5400Z, RX5400Z, P5400Z, and P5400CZ; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100008 and AYL6Y-100007 and LUXSHARE-ICT, model no.: LA9RF353-CS-H and LA9RF352-CS-H.<br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.90 W/kg and 1.53 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively.<br> This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX5400Z, BX5400Z, RX5400Z, P5400Z, and P5400CZ; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100008 and LUXSHARE-ICT, model no.: LA9RF353-CS-H.<br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.20 W/kg and 1.53 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively.<br> This module is approved in portable/mobile configurations with antenna Sky Cross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host Notebook, model number: UX5400Z, BX5400Z, RX5400Z, P5400Z, and P5400CZ; Brand: ASUS, with antenna AWAN, model no.: AYL6Y-100008 and AYL6Y-100007 and LUXSHARE-ICT, model no.: LA9RF353-CS-H and LA9RF352-CS-H.<br> SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.46 W/kg and 0.84 W/kg at 1g tissues, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: NR2201Z, GZ301Z, GZ301ZE, GZ301ZC, GZ301ZA, PZ301Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: NR2201Z, GZ301Z, GZ301ZE, GZ301ZC, GZ301ZA, PZ301Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of ASUS Portable Computer, model: NR2201Z, GZ301Z, GZ301ZE, GZ301ZC, GZ301ZA, PZ301Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.44 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: NR2201Z, GZ301Z, GZ301ZE, GZ301ZC, GZ301ZA, PZ301Z, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.13 W/kg and 1.45 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced atthe upper bandedge channels as shown in filings under this FCC ID. The antenna(s) usedfor this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 Supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance,or a new application. OEM/Hostintegrator must be provided with antenna installation instructions and transmitter operatingconditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. This module is approved in mobile/portable configurations. Only thoseantenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneoustransmission SAR requirements according to published KDB 616217 supplementdocumentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Thistransmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided withantenna installation instructions and transmitter operating conditions to satisfy RF exposurecompliance. OEM/Host integrator is responsible for complying with the instructions andrequirements for each transmitter they choose to integrate into a host product. The highestreported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multitransmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Eurofins E&E Wireless Taiwan Co., Ltd.
various Intel Corporation S.A.S.
various SGS Taiwan Ltd. Central RF Lab
various Eurofins E&E Wireless Taiwan Co., Ltd
various SGS Taiwan Ltd. Electromagnetic Compatibility Lab
various Intel Corporation - Oregon CPRS Labs
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various A Test Lab Techno Corp.
various Name M**** L******
various F****** L********
various N**** A******
various R******** W****
various T**** W******
various F**** B******
various R****** C********
various Telephone Number +886-******** Extension:
various +886-********
various 886-3********
various 00334********
various 88632******** Extension:
various +886-******** Extension:
various 886-3********
various 88622******** Extension:
various 50361********
various +886-********
various 00334********
various Fax Number +886-********
various +886-********
various 88632********
various 886-3********
various +8863********
various 50369********
various +886-********
various 00334********
various E-mail m******@dekra.com
various f******@cpt.eurofinsasia.com
various n******@intel.com
various F******@eurofins.com
various r******@sgs.com
various f******@atl-lab.com.tw
various T******@sgs.com
various f******@intel.com
various r******@bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC EP MO 5955 7115 0.003
1 2 15E CC EP MO 5965 7085 0.006
1 3 15E CC EP MO 5985 7025 0.011
1 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.009
2 2 15C CC MO 2412 2472 0.979
2 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.163
4 2 15E CC MO 5190 5230 0.249
4 3 15E CC MO 5210 5210 0.082
4 4 15E CC MO 5250 5250 0.067
4 5 15E CC MO ND 5260 5320 0.152
4 6 15E CC MO ND 5270 5310 0.246
4 7 15E CC MO ND 5290 5290 0.081
4 8 15E CC MO ND 5500 5700 0.249
4 9 15E CC MO ND 5710 5710 0.128
4 1 15E CC MO ND 5720 5720 0.114
4 11 15E CC MO ND 5530 5690 0.246
4 12 15E CC MO 5745 5825 0.259
4 13 15E CC MO 5755 5795 0.268
4 14 15E CC MO 5775 5775 0.229
4 15 15E CC MO 5845 5885 0.318
4 16 15E CC MO 5835 5875 0.706
4 17 15E CC MO 5855 5855 0.6
4 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC EP MO 5955 7115 0.003
6 2 15E CC EP MO 5965 7085 0.006
6 3 15E CC EP MO 5985 7025 0.011
6 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.163
7 2 15E CC MO 5190 5230 0.249
7 3 15E CC MO 5210 5210 0.082
7 4 15E CC MO 5250 5250 0.067
7 5 15E CC MO ND 5260 5320 0.152
7 6 15E CC MO ND 5270 5310 0.246
7 7 15E CC MO ND 5290 5290 0.081
7 8 15E CC MO ND 5500 5700 0.249
7 9 15E CC MO ND 5710 5710 0.128
7 1 15E CC MO ND 5720 5720 0.114
7 11 15E CC MO ND 5530 5690 0.246
7 12 15E CC MO 5745 5825 0.259
7 13 15E CC MO 5755 5795 0.268
7 14 15E CC MO 5775 5775 0.229
7 15 15E CC MO 5845 5885 0.318
7 16 15E CC MO 5835 5855 0.706
7 17 15E CC MO 5855 5855 0.6
7 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.009
8 2 15C CC MO 2412 2472 0.979
8 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.009
10 2 15C CC MO 2412 2472 0.979
10 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC EP MO 5955 7115 0.003
11 2 15E CC EP MO 5965 7085 0.006
11 3 15E CC EP MO 5985 7025 0.011
11 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.163
12 2 15E CC MO 5190 5230 0.249
12 3 15E CC MO 5210 5210 0.082
12 4 15E CC MO 5250 5250 0.067
12 5 15E CC MO ND 5260 5320 0.152
12 6 15E CC MO ND 5270 5310 0.246
12 7 15E CC MO ND 5290 5290 0.081
12 8 15E CC MO ND 5500 5700 0.249
12 9 15E CC MO ND 5710 5710 0.128
12 1 15E CC MO ND 5720 5720 0.114
12 11 15E CC MO ND 5530 5690 0.246
12 12 15E CC MO 5745 5825 0.259
12 13 15E CC MO 5755 5795 0.268
12 14 15E CC MO 5775 5775 0.229
12 15 15E CC MO 5845 5885 0.318
12 16 15E CC MO 5835 5875 0.706
12 17 15E CC MO 5855 5855 0.6
12 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.009
14 2 15C CC MO 2412 2472 0.979
14 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC MO 5180 5240 0.163
15 2 15E CC MO 5190 5230 0.249
15 3 15E CC MO 5210 5210 0.082
15 4 15E CC MO 5250 5250 0.067
15 5 15E CC MO ND 5260 5320 0.152
15 6 15E CC MO ND 5270 5310 0.246
15 7 15E CC MO ND 5290 5290 0.081
15 8 15E CC MO ND 5500 5700 0.249
15 9 15E CC MO ND 5710 5710 0.128
15 1 15E CC MO ND 5720 5720 0.114
15 11 15E CC MO ND 5530 5690 0.246
15 12 15E CC MO 5745 5825 0.259
15 13 15E CC MO 5755 5795 0.268
15 14 15E CC MO 5775 5775 0.229
15 15 15E CC MO 5845 5885 0.318
15 16 15E CC MO 5835 5875 0.706
15 17 15E CC MO 5855 5855 0.6
15 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC EP MO 5955 7115 0.003
16 2 15E CC EP MO 5965 7085 0.006
16 3 15E CC EP MO 5985 7025 0.011
16 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.009
18 2 15C CC MO 2412 2472 0.979
18 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO 5180 5240 0.163
19 2 15E CC MO 5190 5230 0.249
19 3 15E CC MO 5210 5210 0.082
19 4 15E CC MO 5250 5250 0.067
19 5 15E CC MO ND 5260 5320 0.152
19 6 15E CC MO ND 5270 5310 0.246
19 7 15E CC MO ND 5290 5290 0.081
19 8 15E CC MO ND 5500 5700 0.249
19 9 15E CC MO ND 5710 5710 0.128
19 1 15E CC MO ND 5720 5720 0.114
19 11 15E CC MO ND 5530 5690 0.246
19 12 15E CC MO 5745 5825 0.259
19 13 15E CC MO 5755 5795 0.268
19 14 15E CC MO 5775 5775 0.229
19 15 15E CC MO 5845 5885 0.318
19 16 15E CC MO 5835 5875 0.706
19 17 15E CC MO 5855 5855 0.6
19 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC EP MO 5955 7115 0.003
20 2 15E CC EP MO 5965 7085 0.006
20 3 15E CC EP MO 5985 7025 0.011
20 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.163
21 2 15E CC MO 5190 5230 0.249
21 3 15E CC MO 5210 5210 0.082
21 4 15E CC MO 5250 5250 0.067
21 5 15E CC MO ND 5260 5320 0.152
21 6 15E CC MO ND 5270 5310 0.246
21 7 15E CC MO ND 5290 5290 0.081
21 8 15E CC MO ND 5500 5700 0.249
21 9 15E CC MO ND 5710 5710 0.128
21 1 15E CC MO ND 5720 5720 0.114
21 11 15E CC MO ND 5530 5690 0.246
21 12 15E CC MO 5745 5825 0.259
21 13 15E CC MO 5755 5795 0.268
21 14 15E CC MO 5775 5775 0.229
21 15 15E CC MO 5845 5885 0.318
21 16 15E CC MO 5835 5875 0.706
21 17 15E CC MO 5855 5855 0.6
21 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.163
22 2 15E CC MO 5190 5230 0.249
22 3 15E CC MO 5210 5210 0.082
22 4 15E CC MO 5250 5250 0.067
22 5 15E CC MO ND 5260 5320 0.152
22 6 15E CC MO ND 5270 5310 0.246
22 7 15E CC MO ND 5290 5290 0.081
22 8 15E CC MO ND 5500 5700 0.249
22 9 15E CC MO ND 5710 5710 0.128
22 1 15E CC MO ND 5720 5720 0.114
22 11 15E CC MO ND 5530 5690 0.246
22 12 15E CC MO 5745 5825 0.259
22 13 15E CC MO 5755 5795 0.268
22 14 15E CC MO 5775 5775 0.229
22 15 15E CC MO 5845 5885 0.318
22 16 15E CC MO 5835 5875 0.706
22 17 15E CC MO 5855 5855 0.6
22 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.009
23 2 15C CC MO 2412 2472 0.979
23 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E CC EP MO 5955 7115 0.003
24 2 15E CC EP MO 5965 7085 0.006
24 3 15E CC EP MO 5985 7025 0.011
24 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC EP MO 5955 7115 0.003
26 2 15E CC EP MO 5965 7085 0.006
26 3 15E CC EP MO 5985 7025 0.011
26 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.009
27 2 15C CC MO 2412 2472 0.979
27 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.163
29 2 15E CC MO 5190 5230 0.249
29 3 15E CC MO 5210 5210 0.082
29 4 15E CC MO 5250 5250 0.067
29 5 15E CC MO ND 5260 5320 0.152
29 6 15E CC MO ND 5270 5310 0.246
29 7 15E CC MO ND 5290 5290 0.081
29 8 15E CC MO ND 5500 5700 0.249
29 9 15E CC MO ND 5710 5710 0.128
29 1 15E CC MO ND 5720 5720 0.114
29 11 15E CC MO ND 5530 5690 0.246
29 12 15E CC MO 5745 5825 0.259
29 13 15E CC MO 5755 5795 0.268
29 14 15E CC MO 5775 5775 0.229
29 15 15E CC MO 5845 5885 0.318
29 16 15E CC MO 5835 5875 0.706
29 17 15E CC MO 5855 5855 0.6
29 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.009
30 2 15C CC MO 2412 2472 0.979
30 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC EP MO 5955 7115 0.003
31 2 15E CC EP MO 5965 7085 0.006
31 3 15E CC EP MO 5985 7025 0.011
31 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC EP MO 5955 7115 0.003
33 2 15E CC EP MO 5965 7085 0.006
33 3 15E CC EP MO 5985 7025 0.011
33 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.009
34 2 15C CC MO 2412 2472 0.979
34 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15E CC MO 5180 5240 0.163
35 2 15E CC MO 5190 5230 0.249
35 3 15E CC MO 5210 5210 0.082
35 4 15E CC MO 5250 5250 0.067
35 5 15E CC MO ND 5260 5320 0.152
35 6 15E CC MO ND 5270 5310 0.246
35 7 15E CC MO ND 5290 5290 0.081
35 8 15E CC MO ND 5500 5700 0.249
35 9 15E CC MO ND 5710 5710 0.128
35 1 15E CC MO ND 5720 5720 0.114
35 11 15E CC MO ND 5530 5690 0.246
35 12 15E CC MO 5745 5825 0.259
35 13 15E CC MO 5755 5795 0.268
35 14 15E CC MO 5775 5775 0.229
35 15 15E CC MO 5845 5885 0.318
35 16 15E CC MO 5835 5875 0.706
35 17 15E CC MO 5855 5855 0.6
35 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15E CC MO 5180 5240 0.163
38 2 15E CC MO 5190 5230 0.249
38 3 15E CC MO 5210 5210 0.082
38 4 15E CC MO 5250 5250 0.067
38 5 15E CC MO ND 5260 5320 0.152
38 6 15E CC MO ND 5270 5310 0.246
38 7 15E CC MO ND 5290 5290 0.081
38 8 15E CC MO ND 5500 5700 0.249
38 9 15E CC MO ND 5710 5710 0.128
38 1 15E CC MO ND 5720 5720 0.114
38 11 15E CC MO ND 5530 5690 0.246
38 12 15E CC MO 5745 5825 0.259
38 13 15E CC MO 5755 5795 0.268
38 14 15E CC MO 5775 5775 0.229
38 15 15E CC MO 5845 5885 0.318
38 16 15E CC MO 5835 5875 0.706
38 17 15E CC MO 5855 5855 0.6
38 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC EP MO 5955 7115 0.003
39 2 15E CC EP MO 5965 7085 0.006
39 3 15E CC EP MO 5985 7025 0.011
39 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402 2480 0.009
40 2 15C CC MO 2412 2472 0.979
40 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.009
41 2 15C CC MO 2412 2472 0.979
41 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E CC MO 5180 5240 0.163
42 2 15E CC MO 5190 5230 0.249
42 3 15E CC MO 5210 5210 0.082
42 4 15E CC MO 5250 5250 0.067
42 5 15E CC MO ND 5260 5320 0.152
42 6 15E CC MO ND 5270 5310 0.246
42 7 15E CC MO ND 5290 5290 0.081
42 8 15E CC MO ND 5500 5700 0.249
42 9 15E CC MO ND 5710 5710 0.128
42 1 15E CC MO ND 5720 5720 0.114
42 11 15E CC MO ND 5530 5690 0.246
42 12 15E CC MO 5745 5825 0.259
42 13 15E CC MO 5755 5795 0.268
42 14 15E CC MO 5775 5775 0.229
42 15 15E CC MO 5845 5885 0.318
42 16 15E CC MO 5835 5875 0.706
42 17 15E CC MO 5855 5855 0.6
42 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E CC EP MO 5955 7115 0.003
43 2 15E CC EP MO 5965 7085 0.006
43 3 15E CC EP MO 5985 7025 0.011
43 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402 2480 0.009
45 2 15C CC MO 2412 2472 0.979
45 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC EP MO 5955 7115 0.003
46 2 15E CC EP MO 5965 7085 0.006
46 3 15E CC EP MO 5985 7025 0.011
46 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15E CC MO 5180 5240 0.163
48 2 15E CC MO 5190 5230 0.249
48 3 15E CC MO 5210 5210 0.082
48 4 15E CC MO 5250 5250 0.067
48 5 15E CC MO ND 5260 5320 0.152
48 6 15E CC MO ND 5270 5310 0.246
48 7 15E CC MO ND 5290 5290 0.081
48 8 15E CC MO ND 5500 5700 0.249
48 9 15E CC MO ND 5710 5710 0.128
48 1 15E CC MO ND 5720 5720 0.114
48 11 15E CC MO ND 5530 5690 0.246
48 12 15E CC MO 5745 5825 0.259
48 13 15E CC MO 5755 5795 0.268
48 14 15E CC MO 5775 5775 0.229
48 15 15E CC MO 5845 5885 0.318
48 16 15E CC MO 5835 5875 0.706
48 17 15E CC MO 5855 5855 0.6
48 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15E CC MO 5180 5240 0.163
49 2 15E CC MO 5190 5230 0.249
49 3 15E CC MO 5210 5210 0.082
49 4 15E CC MO 5250 5250 0.067
49 5 15E CC MO ND 5260 5320 0.152
49 6 15E CC MO ND 5270 5310 0.246
49 7 15E CC MO ND 5290 5290 0.081
49 8 15E CC MO ND 5500 5700 0.249
49 9 15E CC MO ND 5710 5710 0.128
49 1 15E CC MO ND 5720 5720 0.114
49 11 15E CC MO ND 5530 5690 0.246
49 12 15E CC MO 5745 5825 0.259
49 13 15E CC MO 5755 5795 0.268
49 14 15E CC MO 5775 5775 0.229
49 15 15E CC MO 5845 5885 0.318
49 16 15E CC MO 5835 5875 0.706
49 17 15E CC MO 5855 5855 0.6
49 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC MO 5180 5240 0.163
50 2 15E CC MO 5190 5230 0.249
50 3 15E CC MO 5210 5210 0.082
50 4 15E CC MO 5250 5250 0.067
50 5 15E CC MO ND 5260 5320 0.152
50 6 15E CC MO ND 5270 5310 0.246
50 7 15E CC MO ND 5290 5290 0.081
50 8 15E CC MO ND 5500 5700 0.249
50 9 15E CC MO ND 5710 5710 0.128
50 1 15E CC MO ND 5720 5720 0.114
50 11 15E CC MO ND 5530 5690 0.246
50 12 15E CC MO 5745 5825 0.259
50 13 15E CC MO 5755 5795 0.268
50 14 15E CC MO 5775 5775 0.229
50 15 15E CC MO 5845 5885 0.318
50 16 15E CC MO 5835 5875 0.706
50 17 15E CC MO 5855 5855 0.6
50 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E CC MO 5180 5240 0.0163
51 2 15E CC MO 5190 5230 0.249
51 3 15E CC MO 5210 5210 0.082
51 4 15E CC MO 5250 5250 0.067
51 5 15E CC MO ND 5260 5320 0.152
51 6 15E CC MO ND 5270 5310 0.246
51 7 15E CC MO ND 5290 5290 0.081
51 8 15E CC MO ND 5500 5700 0.249
51 9 15E CC MO ND 5710 5710 0.128
51 1 15E CC MO ND 5720 5720 0.114
51 11 15E CC MO ND 5530 5690 0.246
51 12 15E CC MO 5745 5825 0.259
51 13 15E CC MO 5755 5795 0.268
51 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402 2480 0.009
52 2 15C CC MO 2412 2472 0.979
52 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15E CC EP MO 5955 7115 0.003
54 2 15E CC EP MO 5965 7085 0.006
54 3 15E CC EP MO 5985 7025 0.011
54 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15C CC 2402 2480 0.009
55 2 15C CC MO 2412 2472 0.979
55 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15E CC 5180 5240 0.163
56 2 15E CC 5190 5230 0.249
56 3 15E CC 5210 5210 0.082
56 4 15E CC 5250 5250 0.067
56 5 15E CC 5260 5320 0.152
56 6 15E CC 5270 5310 0.246
56 7 15E CC 5290 5290 0.081
56 8 15E CC 5500 5700 0.249
56 9 15E CC 5710 5710 0.128
56 1 15E CC 5720 5720 0.114
56 11 15E CC 5530 5690 0.246
56 12 15E CC 5745 5825 0.259
56 13 15E CC 5755 5795 0.268
56 14 15E CC 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15E CC EP MO 5955 7115 0.003
57 2 15E CC EP MO 5965 7085 0.006
57 3 15E CC EP MO 5985 7025 0.011
57 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5180 5240 0.163
59 2 15E CC MO 5190 5230 0.249
59 3 15E CC MO 5210 5210 0.082
59 4 15E CC MO 5250 5250 0.067
59 5 15E CC MO ND 5260 5320 0.152
59 6 15E CC MO ND 5270 5310 0.246
59 7 15E CC MO ND 5290 5290 0.081
59 8 15E CC MO ND 5500 5700 0.249
59 9 15E CC MO ND 5710 5710 0.128
59 1 15E CC MO ND 5720 5720 0.114
59 11 15E CC MO ND 5530 5690 0.246
59 12 15E CC MO 5745 5825 0.259
59 13 15E CC MO 5755 5795 0.268
59 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15E CC MO 5955 7115 0.003
61 2 15E CC MO 5965 7085 0.006
61 3 15E CC MO 5985 7025 0.011
61 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402 2480 0.009
62 2 15C CC MO 2412 2472 0.979
62 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15E CC EP MO 5955 7115 0.003
63 2 15E CC EP MO 5965 7085 0.006
63 3 15E CC EP MO 5985 7025 0.011
63 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15E CC MO 5180 5240 0.163
64 2 15E CC MO 5190 5230 0.249
64 3 15E CC MO 5210 5210 0.082
64 4 15E CC MO 5250 5250 0.067
64 5 15E CC MO ND 5260 5320 0.152
64 6 15E CC MO ND 5270 5310 0.246
64 7 15E CC MO ND 5290 5290 0.081
64 8 15E CC MO ND 5500 5700 0.249
64 9 15E CC MO ND 5710 5710 0.128
64 1 15E CC MO ND 5720 5720 0.114
64 11 15E CC MO ND 5530 5690 0.246
64 12 15E CC MO 5745 5825 0.259
64 13 15E CC MO 5755 5795 0.268
64 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15C CC 2402 2480 0.009
66 2 15C CC MO 2412 2472 0.979
66 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC MO 5180 5240 0.163
68 2 15E CC MO 5190 5230 0.249
68 3 15E CC MO 5210 5210 0.082
68 4 15E CC MO 5250 5250 0.067
68 5 15E CC MO ND 5260 5320 0.152
68 6 15E CC MO ND 5270 5310 0.246
68 7 15E CC MO ND 5290 5290 0.081
68 8 15E CC MO ND 5500 5700 0.249
68 9 15E CC MO ND 5710 5710 0.128
68 1 15E CC MO ND 5720 5720 0.114
68 11 15E CC MO ND 5530 5690 0.246
68 12 15E CC MO 5745 5825 0.259
68 13 15E CC MO 5755 5795 0.268
68 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402 2480 0.009
69 2 15C CC MO 2412 2472 0.979
69 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15E CC EP MO 5955 7115 0.003
70 2 15E CC EP MO 5965 7085 0.006
70 3 15E CC EP MO 5985 7025 0.011
70 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15E CC EP MO 5955 7115 0.003
72 2 15E CC EP MO 5965 7085 0.006
72 3 15E CC EP MO 5985 7025 0.011
72 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15E CC MO 5180 5240 0.163
73 2 15E CC MO 5190 5230 0.249
73 3 15E CC MO 5210 5210 0.082
73 4 15E CC MO 5250 5250 0.067
73 5 15E CC MO ND 5260 5320 0.152
73 6 15E CC MO ND 5270 5310 0.246
73 7 15E CC MO ND 5290 5290 0.081
73 8 15E CC MO ND 5500 5700 0.249
73 9 15E CC MO ND 5710 5710 0.128
73 1 15E CC MO ND 5720 5720 0.114
73 11 15E CC MO ND 5530 5690 0.246
73 12 15E CC MO 5745 5825 0.259
73 13 15E CC MO 5755 5795 0.268
73 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402 2480 0.009
74 2 15C CC MO 2412 2472 0.979
74 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402 2480 0.009
76 2 15C CC MO 2412 2472 0.979
76 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15E CC EP MO 5955 7115 0.003
77 2 15E CC EP MO 5965 7085 0.006
77 3 15E CC EP MO 5985 7025 0.011
77 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15E CC 5180 5240 0.163
78 2 15E CC 5190 5230 0.249
78 3 15E CC 5210 5210 0.082
78 4 15E CC 5250 5250 0.067
78 5 15E CC 5260 5320 0.152
78 6 15E CC 5270 5310 0.246
78 7 15E CC 5290 5290 0.081
78 8 15E CC 5500 5700 0.249
78 9 15E CC 5710 5710 0.128
78 1 15E CC 5720 5720 0.114
78 11 15E CC 5530 5690 0.246
78 12 15E CC 5745 5825 0.259
78 13 15E CC 5755 5795 0.268
78 14 15E CC 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402 2480 0.009
79 2 15C CC MO 2412 2472 0.979
79 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15E CC MO 5180 5240 0.163
80 2 15E CC MO 5190 5230 0.249
80 3 15E CC MO 5210 5210 0.082
80 4 15E CC MO 5250 5250 0.067
80 5 15E CC MO ND 5260 5320 0.152
80 6 15E CC MO ND 5270 5310 0.246
80 7 15E CC MO ND 5290 5290 0.081
80 8 15E CC MO ND 5500 5700 0.249
80 9 15E CC MO ND 5710 5710 0.128
80 1 15E CC MO ND 5720 5720 0.114
80 11 15E CC MO ND 5530 5690 0.246
80 12 15E CC MO 5745 5825 0.259
80 13 15E CC MO 5755 5795 0.268
80 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15E CC EP MO 5955 7115 0.003
82 2 15E CC EP MO 5965 7085 0.006
82 3 15E CC EP MO 5985 7025 0.011
82 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15E CC MO 5180 5240 0.163
83 2 15E CC MO 5190 5230 0.249
83 3 15E CC MO 5210 5210 0.082
83 4 15E CC MO 5250 5250 0.067
83 5 15E CC MO ND 5260 5320 0.152
83 6 15E CC MO ND 5270 5310 0.246
83 7 15E CC MO ND 5290 5290 0.081
83 8 15E CC MO ND 5500 5700 0.249
83 9 15E CC MO ND 5710 5710 0.128
83 1 15E CC MO ND 5720 5720 0.114
83 11 15E CC MO ND 5530 5690 0.246
83 12 15E CC MO 5745 5825 0.259
83 13 15E CC MO 5755 5795 0.268
83 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15C CC 2402 2480 0.009
84 2 15C CC MO 2412 2472 0.979
84 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15E CC EP MO 5955 7115 0.003
85 2 15E CC EP MO 5965 7085 0.006
85 3 15E CC EP MO 5985 7025 0.011
85 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15E CC EP MO 5955 7115 0.003
87 2 15E CC EP MO 5965 7085 0.006
87 3 15E CC EP MO 5985 7025 0.011
87 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15E CC 5180 5240 0.163
88 2 15E CC 5190 5230 0.249
88 3 15E CC 5210 5210 0.082
88 4 15E CC 5250 5250 0.067
88 5 15E CC 5260 5320 0.152
88 6 15E CC 5270 5310 0.246
88 7 15E CC 5290 5290 0.081
88 8 15E CC 5500 5700 0.249
88 9 15E CC 5710 5710 0.128
88 1 15E CC 5720 5720 0.114
88 11 15E CC 5530 5690 0.246
88 12 15E CC 5745 5825 0.259
88 13 15E CC 5755 5795 0.268
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15C CC 2402 2480 0.009
89 2 15C CC MO 2412 2472 0.979
89 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15E CC EP MO 5955 7115 0.003
91 2 15E CC EP MO 5965 7085 0.006
91 3 15E CC EP MO 5985 7025 0.011
91 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15E CC EP MO 5955 7115 0.003
93 2 15E CC EP MO 5965 7085 0.006
93 3 15E CC EP MO 5985 7025 0.011
93 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15E CC 5180 5240 0.163
94 2 15E CC 5190 5230 0.249
94 3 15E CC 5210 5210 0.082
94 4 15E CC 5250 5250 0.067
94 5 15E CC 5260 5320 0.152
94 6 15E CC 5270 5310 0.246
94 7 15E CC 5290 5290 0.081
94 8 15E CC 5500 5700 0.249
94 9 15E CC 5710 5710 0.128
94 1 15E CC 5720 5720 0.114
94 11 15E CC 5530 5690 0.246
94 12 15E CC 5745 5825 0.259
94 13 15E CC 5755 5795 0.268
94 14 15E CC 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2402 2480 0.009
95 2 15C CC MO 2412 2472 0.979
95 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15E CC EP MO 5955 7115 0.003
97 2 15E CC EP MO 5965 7085 0.006
97 3 15E CC EP MO 5985 7025 0.011
97 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC MO 5180 5240 0.163
98 2 15E CC MO 5190 5230 0.249
98 3 15E CC MO 5210 5210 0.082
98 4 15E CC MO 5250 5250 0.067
98 5 15E CC MO ND 5260 5320 0.152
98 6 15E CC MO ND 5270 5310 0.246
98 7 15E CC MO ND 5290 5290 0.081
98 8 15E CC MO ND 5500 5700 0.249
98 9 15E CC MO ND 5710 5710 0.128
98 1 15E CC MO ND 5720 5720 0.114
98 11 15E CC MO ND 5530 5690 0.246
98 12 15E CC MO 5745 5825 0.259
98 13 15E CC MO 5755 5795 0.268
98 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15C CC 2402 2480 0.009
99 2 15C CC MO 2412 2472 0.979
99 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E CC 5180 5240 0.163
100 2 15E CC 5190 5230 0.249
100 3 15E CC 5210 5210 0.082
100 4 15E CC 5250 5250 0.067
100 5 15E CC 5260 5320 0.152
100 6 15E CC 5270 5310 0.246
100 7 15E CC 5290 5290 0.081
100 8 15E CC 5500 5700 0.249
100 9 15E CC 5710 5710 0.128
100 1 15E CC 5720 5720 0.114
100 11 15E CC 5530 5690 0.246
100 12 15E CC 5745 5825 0.259
100 13 15E CC 5755 5795 0.268
100 14 15E CC 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15E CC EP MO 5955 7115 0.003
101 2 15E CC ED MO 5965 7085 0.006
101 3 15E CC EP MO 5985 7025 0.011
101 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402 2480 0.009
103 2 15C CC MO 2412 2472 0.979
103 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15E CC EP MO 5955 7115 0.003
104 2 15E CC EP MO 5965 7085 0.006
104 3 15E CC EP MO 5985 7025 0.011
104 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15E CC MO 5180 5240 0.163
105 2 15E CC MO 5190 5230 0.249
105 3 15E CC MO 5210 5210 0.082
105 4 15E CC MO 5250 5250 0.067
105 5 15E CC MO ND 5260 5320 0.152
105 6 15E CC MO ND 5270 5310 0.246
105 7 15E CC MO ND 5290 5290 0.081
105 8 15E CC MO ND 5500 5700 0.249
105 9 15E CC MO ND 5710 5710 0.128
105 1 15E CC MO ND 5720 5720 0.114
105 11 15E CC MO ND 5530 5690 0.246
105 12 15E CC MO 5745 5825 0.259
105 13 15E CC MO 5755 5795 0.268
105 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15C CC 2402 2480 0.009
107 2 15C CC MO 2412 2472 0.979
107 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15C CC 2402 2480 0.009
108 2 15C CC MO 2412 2472 0.979
108 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15E CC MO 5180 5240 0.163
110 2 15E CC MO 5190 5230 0.249
110 3 15E CC MO 5210 5210 0.082
110 4 15E CC MO 5250 5250 0.067
110 5 15E CC MO ND 5260 5320 0.152
110 6 15E CC MO ND 5270 5310 0.246
110 7 15E CC MO ND 5290 5290 0.081
110 8 15E CC MO ND 5500 5700 0.249
110 9 15E CC MO ND 5710 5710 0.128
110 1 15E CC MO ND 5720 5720 0.114
110 11 15E CC MO ND 5530 5690 0.246
110 12 15E CC MO 5745 5825 0.259
110 13 15E CC MO 5755 5795 0.268
110 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15E CC EP MO 5955 7115 0.003
111 2 15E CC EP MO 5965 7085 0.006
111 3 15E CC EP MO 5985 7025 0.011
111 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC