FCC ID: MSQWL107 wireless lan pc card

Wireless Local Area Network Card WL-107

(For 802.11b Wireless Networks) Users Manual Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright 2004 ASUSTeK COMPUTER INC. All Rights Reserved. Product Name:

Manual Revision: 1 E1588 Release Date:

April 2004 ASUS WLAN Card (WL-107) 2 ASUS WLAN Card Copyright Information ASUSTeK COMPUTER INC. (Asia-Pacific) Address Telephone Web site 150 Li-Te Road, Peitou, Taipei, Taiwan 112

+886-2-2894-3447 www.asus.com.tw Technical Support Telephone (MB/Component) +886-2-2890-7121 (English)

+886-2-2890-7122 (English)

+886-2-2890-7123 (English)

+886-2-2890-7902 (English)

+886-2-2890-7698

(Notebook)

(Server/PC)

(Networking) Support fax ASUS COMPUTER INTERNATIONAL (America) Address Fax E-mail Web site 44370 Nobel Drive, Fremont, CA 94538, USA

+1-510-608-4555 tmd1@asus.com usa.asus.com Technical Support Telephone (General)

(Notebook) Support fax Support e-mail

+1-502-995-0883

+1-510-739-3777

+1-502-933-8713 tsd@asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Telephone Fax Online contact Harkort Str. 25, D-40880 Ratingen, Germany

+49-2102-95990

+49-2102-959911 www.asuscom.de/sales Technical Support Telephone Fax Online support Web site

+49-2102-95990

+49-2102-959911 www.asuscom.de/support www.asuscom.de/news ASUS COMPUTER (Middle East and North Africa) Address Telephone Fax Web site P.O. Box 64133, Dubai, U.A.E.

+9714-283-1774

+9714-283-1775 www.ASUSarabia.com ASUS WLAN Card 3 Table of Contents 1. Introduction ............................................................................. 7 Overview .............................................................................................. 7 The ASUS Wireless LAN Family ..................................................... 8 ASUS WLAN Card Utilities Introduction ....................................... 10 System Requirements ........................................................................ 11 Installation Procedures ....................................................................... 11 Installing the ASUS WLAN utilities and driver ............................... 12 Configuring the ASUS WLAN utility .............................................. 13 Soft AP (Windows XP Only) ............................................................... 15 Reading the ASUS WLAN Status Indicators ...................................... 16 3. Software Reference .............................................................. 17 Chapter Overview ............................................................................... 17 Windows XP Wireless Options ..................................................... 18 ASUS WLAN Control Center .............................................................. 19 Site Monitor ................................................................................... 22 Wireless Settings Utility ...................................................................... 24 Status - Status Tab ....................................................................... 25 Status - Connection Tab ............................................................... 29 Status - IP Config Tab ................................................................... 30 Config - Basic Tab ......................................................................... 31 Config - Encryption Tab ................................................................ 33 Survey - Site Survey Tab .............................................................. 36 About - Version Info Tab ............................................................... 37 Link State ...................................................................................... 38 Exit Wireless Settings ................................................................... 38 Mobile Manager Utility ........................................................................ 39 New Configuration Wizard ............................................................ 43 Edit Configuration ......................................................................... 44 Ad Hoc ................................................................................................ 52 Troubleshooting Utility ........................................................................ 54 Windows XP Wireless Properties ....................................................... 57 4 ASUS WLAN Card Table of Contents 4. Troubleshooting .................................................................... 59 5. Glossary ................................................................................. 61 6. Safety Information................................................................. 69 Federal Communications Commission ............................................... 69 FCC Radio Frequency Interference Requirements ...................... 70 FCC RF Exposure Guidelines (Access Points) ............................ 70 FCC RF Exposure Guidelines (Wireless Cards) ........................... 71 Canadian Department of Communications ........................................ 71 Operation Channel for Different Domains .......................................... 71 France Restricted Frequency Band .................................................... 72 ASUS WLAN Card 5 6 ASUS WLAN Card 1 r e t p a h C n o i t c u d o r t n I Chapter 1 - Introduction 1. Introduction Overview Thank you for purchasing the ASUS WLAN Card. The ASUS WLAN Card is a PCMCIA compliant wireless network interface card (NIC) for any computer equipped with a PC Card slot (available mainly in Notebook PCs). The ASUS WLAN Card is designed to be fully compliant with both the IEEE802.11b wireless local area network (Wireless LAN) standards. As a result of the completion of the standard, the interoperability of Wireless LAN products among multiple manufacturers will be guaranteed. The ASUS WLAN Card product provides high-speed, standards-based Wireless LAN solutions. The ASUS WLAN Card configuration utility is a user-friendly application that helps you quickly setup multiple roaming nodes using the ASUS WLAN Card. You can even export the configuration settings to a file and import them to other computers for fast multiple installations using ASUS Mobile Manager. Wireless LANs are complementary extensions to existing wired LANs, offering complete mobility while maintaining continuous network connectivity to both corporate and home Intranets. They add a new level of convenience for LAN users. PC users stay connected to the network anywhere throughout a building without being bound by a LAN wires. This is accomplished through the use of ASUS WLAN Access Points or ASUS WLAN Home Gateways. ASUS WLAN Home Gateways with built-in Internet gateway capability, allows your family to share a broadband Modem and one ISP account simultaneously from different rooms without wires! ASUS WLAN products can keep you connected anywhere, any time. ASUS WLAN Card 7 I n t r o d u c t i o n C h a p t e r 1 Chapter 1 - Introduction The ASUS Wireless LAN Family The ASUS Wireless LAN family contains a complete solution for wireless local area networks in the office or at home. For 802.11b Wireless Networks The ASUS WLAN Gateway (WL-500b) creates a w i r e l e s s network using the IEEE 802.11b wireless standard and allows sharing a single Internet connection. The ASUS WLAN PC Card (WL-103b/107) is a IEEE 802.11b wireless LAN adapter that fits into a standard PCMCIA Type II slot. The ASUS WLAN PCI Card (WL-

130b) is a wireless LAN adapter that fits into a standard PCI slot in a desktop PC and creates a wireless network using the IEEE 802.11b wireless standard. The ASUS 3 in 1 Pocket Access Point (WL-330) creates a wireless network using the IEEE 802.11b wireless standard. The ASUS WLAN 802.11b USB Client

(WL-140) is an IEEE 802.11b wireless USB LAN adapter that connects to any computers USB port with the benefit of being able to place the antenna anywhere in order to maximize signal strength. The ASUS WLAN 802.11b CF Card (WL-

110) is a IEEE 802.11b wireless LAN adapter that fits into a Compact Flash Type II slot in a Portable Digital Assistant (PDA). The above illustrations are not to scale. 8 ASUS WLAN Card 1 r e t p a h C n o i t c u d o r t n I Chapter 1 - Introduction For 802.11g & 802.11b Wireless Networks The ASUS WLAN Gateway (WL-500g) creates a w i r e l e s s network using the IEEE 802.11g/b wireless standards and allows sharing a single Internet connection. The ASUS WLAN PC Card (WL-107g) is a wireless LAN adapter that fits into a PCMCIA Type II slot in a Notebook PC and creates a wireless network using the IEEE 802.11g/b wireless standards. The ASUS 3 in 1 Pocket Access Point (WL-330g) creates a wireless network using the IEEE 802.11g/b wireless standards. The ASUS USB Wireless LAN Adapter (WL-

160g) creates a wireless network using the IEEE 802.11g/b wireless standards and connects to any computer using USB2.0 connectivity. The ASUS WLAN PCI Card (WL-138g) is a wireless LAN adapter that fits into a standard PCI slot in a desktop PC and creates a wireless network using the IEEE 802.11g/b wireless standards. The above illustrations are not to scale. ASUS WLAN Card 9 I n t r o d u c t i o n C h a p t e r 1 Chapter 1 - Introduction ASUS WLAN Card Utilities Introduction Control Center The Control Center integrates all the tools and displays real time status on the system tray. Setup Wizard Sets up your home networking using easy-to-

follow steps. Wireless Settings Wireless Settings allows you to diagnose and configure your wireless network settings. Mobile Manager The Mobile Manager is a convenient tool to setup and configure multiple alternative configurations for different locations. Site Monitor The Site Monitor utility measures the signal-to-

noise (SNR) values of available wireless networks. TroubleShooting The TroubleShooting utility provides a flowchart to solve connection problems between the ASUS WLAN card and a wireless network. 10 ASUS WLAN Card Chapter 2 - Installation System Requirements To begin using the ASUS WLAN Card, you must have the following minimum requirements:

Windows XP/2000/ME/98SE or Linux Redhat (Version 7.1 or later) Standard PCMCIA Slot Type II 32MB system memory or larger 300MHz processor or higher Installation Procedures Linux users: This manual is meant for Windows users. Information pertaining to Linux is located in readme.txt in the Linux folder. Linux drivers are also located in the same folder. Important: Install the ASUS WLAN card utilities before inserting the ASUS WLAN Card into your computer. Follow these two easy steps before using the ASUS WLAN card. 1. Install the ASUS WLAN card utilities and driver from the support CD. 2. Insert the ASUS WLAN card into your computer. 2 r e t p a h C t r a t S k c i u Q ASUS WLAN Card 11 Q u i c k S t a r t C h a p t e r 2 Chapter 2 - Installation Installing the ASUS WLAN utilities and driver Follow these instructions to install the ASUS WLAN card utilities and driver. Insert the support CD and an autorun menu will appear. If your autorun is disabled, double click SETUP.EXE in the root directory of the support CD. 1. Select your language and click Install ASUS 2. Click Next on the Welcome screen. WLAN Card Utilities/Driver. 3. Click Next after reading the Information. 4. Click Next to use the default Destination Folder or click Browse to select another folder. 5. Click Next to place icons in the default pro-

gram folder or type another folder name. 6. When Setup is complete, click Finish to exit the installation wizard and restart Windows. 12 ASUS WLAN Card Chapter 2 - Installation 7. Windows XP users: When the program is launched for the first time (during Windows restart), you will be asked which function to use. Select to use ASUS utilities for more functions. 8. Carefully insert the ASUS WLAN card into your computers PC card slot. Windows will automatically find and configure the ASUS WLAN card using the drivers installed in the previous steps. 2 r e t p a h C t r a t S k c i u Q Configuring the ASUS WLAN utility After installing the ASUS WLAN Card Utilities, you will need to make some settings before being able to use your wireless connection. Double-click the ASUS WLAN Control Center icon to start the utility. 1. Right-click the ASUS WLAN icon and se-

lect Wireless Settings 2. Set the Network Name (SSID) to the same name as the SSID set in your wireless ac-

cess point. ASUS WLAN Card 13 Q u i c k S t a r t C h a p t e r 2 Chapter 2 - Installation 3. Use Site Survey if you dont know the name of your access point(s). 4. Encryption settings must also match those set in the access point. Ask your network administrator about settings if necessary. Click Apply to save your settings 5. Check the Status page to see the Asso-

ciation State. It should show Connected -

xx:xx:xx:xx:xx:xx. 6. You can also see the connection quality on the Connection page. Click OK to exit the utility. 14 ASUS WLAN Card Chapter 2 - Installation Soft AP (Windows XP Only) Soft AP mode allows the ASUS WLAN card to act as a virtual access point. The computer needs to be connected to a wired network using an Ethernet connection in order to provide network access to WLAN clients. 2 r e t p a h C t r a t S k c i u Q 1. Select Soft AP Mode 2. Drag and drop a wired network connection next to the globe icon. 3. Enable ICS* and Firewall if desired. Refer to Windows help for information on Inter-

net Connection Sharing. 4. You can easily switch between Soft AP and Station mode by right clicking the taskbar icon and selecting A-S Change Mode.

*ICS is used to share this computers Internet connection with the rest of the computers on your network. When this computer is connected to the Internet, communication to and from the Inter-

net to all the computers on your network are sent through this computer, called the host com-

puter. Other computers can send and receive email and access the Web as if it were connected directly to the Internet. ASUS WLAN Card 15 Q u i c k S t a r t C h a p t e r 2 Chapter 2 - Installation Reading the ASUS WLAN Status Indicators The part of the ASUS WLAN Card that protrudes out of the PCMCIA socket consists of two LEDs that indicate the status of the ASUS WLAN Card . PWR ACT PWR (Power) LED OFF:

ON:

No power or error. Power ON. ACT (Activity) LED OFF:

Blink:

No wireless activity. Transmitting or receiving wireless data. 16 ASUS WLAN Card Chapter 3 - Reference 3. Software Reference Chapter Overview The ASUS WLAN Card software includes several utilities 3 r e t p a h C e c n e r e f e R e r a w t f o S ASUS WLAN Control Center Makes it easy to launch applications and activate network location settings. Mobile Manager A convenient tool to setup and manage network location settings. Setup Wizard - Sets up your home networking using easy-to-follow steps. Site Monitor Measures the received signal strength indicator (RSSI) values of all wireless networks. This tool is used for determining the best placement of Access Points to provide the most efficient coverage in a wireless network. Troubleshooting - Troubleshooting will test your settings and connec-

tion to try to pinpoint your problem and give you a solution. Wireless Settings Allows users to control the ASUS WLAN Card. Additional Reference Windows XP Wireless Properties - Brief overview of the wireless settings provided in Windows XP. ASUS WLAN Card 17 Chapter 3 - Reference Windows XP Wireless Options The wireless options shown below is only available for Windows XP. The first time you run the Control Center utility, it will automatically show. Select one of the radio buttons to decide which interface to use with your ASUS WLAN Card. Only use XP wireless function Only use Windows XP wireless network settings to configure the ASUS WLAN Card. Only use ASUS utilities and disable XP wireless function Only use ASUS WLAN Card utilities to configure the ASUS WLAN Card.

(recommended) S o f t w a r e R e f e r e n c e C h a p t e r 3 You can return to the Wireless Option setting at any time by left clicking the control center icon and choosing Wireless Option. Taskbar Left-Click Menu 18 ASUS WLAN Card Chapter 3 - Reference ASUS WLAN Control Center Control Center is an application that makes it easy to launch applications and activate network location settings. Control Center starts automatically when the system boots. Whenever Control Center is running, you will see a Control Center icon displayed on the Windows taskbar. Starting the Control Center manually Select ASUS WLAN Control Center in Windows Start menu. or Double click the ASUS WLAN Control Center icon on the desktop. 3 r e t p a h C r e t n e C l o r t n o C Windows Start Menu Using the Control Center Taskbar The Control Center Taskbar menu display the following information:

The link quality of the ASUS WLAN Card (Excellent, Good, Fair, Poor, Not Linked) Whether the ASUS WLAN Card is connected to the Internet (Blue:

Connected, Gray: Not Connected) Taskbar Icon and Status ASUS WLAN Card 19 C o n t r o l C e n t e r C h a p t e r 3 Chapter 3 - Reference Wireless Status Icons (on the taskbar) Excellent link quality and connected to Internet (Infrastructure) Good link quality and connected to Internet (Infrastructure) Fair link quality and connected to Internet (Infrastructure) Poor link quality and connected to Internet (Infrastructure) Not linked but connected to Internet (Infrastructure) Excellent link quality but not connected to Internet (Infrastructure) Good link quality but not connected to Internet (Infrastructure) Fair link quality but not connected to Internet (Infrastructure) Poor link quality but not connected to Internet (Infrastructure) Not linked and not connected to Internet (Infrastructure) Taskbar Icon - Right Menu Right-clicking the taskbar icon shows the following menu items:

Wireless Settings Launches Wireless Settings application. Activate Configuration Allows you to set which profile to use. Mobile Manager Launches Mobile Manager application. Site Monitor Launches the Site Monitor application. Right-Click Menu 20 ASUS WLAN Card Chapter 3 - Reference Change Mode (Windows XP Only) - Configures your card in Station

(STA) or Soft Access Point (Soft AP) mode. In STA mode, your card connects to an access point to access a wireless network or the Internet. In Soft AP mode, your card transmits and receives signals to and from other WiFi devices in a wireless network. Preferences Customizes the way the Control Center program behaves. You can create a Control Center shortcut on the desktop. You can also set whether Control Center starts up with Windows. Exit Closes the Control Center program. Taskbar Icon - Left Menu Left-clicking the taskbar icon shows the following menu:

Wireless Radio On Turns the wireless radio ON. Wireless Radio Off Turns the wireless radio OFF. Search & Connect View the 3 r e t p a h C r e t n e C l o r t n o C Taskbar Left-Click Menu properties of available Access Points within range. Wireless Option (Windows XP only) Sets your Windows XP wire-

less networking environment. Taskbar Icon - Launch Wireless Settings Double-clicking the taskbar icon:

Launches the Wireless Settings application. ASUS WLAN Card 21 S i t e M o n i t o r C h a p t e r 3 Chapter 3 - Reference Site Monitor Site Monitor measures the received signal strength indicator (RSSI) values of all available wireless networks. This tool is used for determining the best placement of Access Points to provide the best coverage for a wireless network. Windows Start Menu Starting Site Monitor Click the Windows Start button, select Programs | ASUS Utility |

WLAN Card | Site Monitor. or Right-click the Control Center icon on the Windows taskbar and then click Site Monitor. Your wireless LAN perfor-

mance may be affected when running the site monitor. Main Screen Measures the signal values of all available wireless networks. Some Access Points can disable broadcasting SSID to hide them-

selves from Site Survey or Site Monitor for added security but still allow you to join if you know their SSID. 22 ASUS WLAN Card Chapter 3 - Reference Monitor Directed link state test with one particular wireless network, including:

RSSI: This indicates the value of received signal strength of the last received frame. In principle, the higher the RSSI, the better your communications quality. Throughput: This sends a specified number of data packets to the remote host and calculates the average megabytes per second. During the test, the Start button toggles to Stop. You can click Start button to begin the link test and click Stop button at any time to terminate the test. 3 r e t p a h C r o t i n o M e t i S ASUS WLAN Card 23 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Wireless Settings Utility Wireless Settings is an application that allows you to control your ASUS WLAN Card. Use Wireless Settings to View or Modify the configuration settings and monitor the operational status of your PC Card. Once Wireless Settings is launched, you can see the tabbed property sheet. This property sheet is composed of tabbed pages, each with its own group of feature-

specific settings. Starting Wireless Settings Open the Windows Control Panel, and then double-click the ASUS WLAN Card Settings icon. or Click the Windows Start button, select Programs | ASUS Utility |

WLAN Card | Wireless Settings. or Right-click the Control Center icon on the Windows taskbar, select Wireless Settings. Windows Start Menu Right-Click Menu Note: If you have more than one ASUS WLAN device, you will be given a device selection window when you launch the Wireless Set-

tings utility. Select the appropriate model if you face this situation. 24 ASUS WLAN Card Chapter 3 - Reference Status - Status Tab You can view the information about the ASUS WLAN Card from the general menu. These fields are blank if the ASUS WLAN Card does not exist. Scanning Connected You can turn OFF the ASUS WLAN Card by clicking the Disable Radio button. 3 r e t p a h C s g n i t t e S s w o d n W i Radio Disabled ASUS WLAN Card 25 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Association State Displays the connection status as follows:

Connected - The station is now associated with one wireless LAN device. When operating in Infrastructure mode, this field shows the MAC address of the Access Point with which you are communicating. When operating in Ad Hoc* mode, this field shows the virtual MAC address used by computers participating in the Ad Hoc* network. Scanning... - The station is now attempting to authenticate and associate with the desired Access Point or Ad Hoc* node. Disconnected - The link is connected, but no beacon received. SSID Displays the Service Set Identifier (SSID) that the card is either associated or intending to join. MAC address Indicates the hardware address of the card. MAC address is a unique identifier for networking devices (typically written as twelve hexadecimal digits 0 through 9 and A through F, six hexadecimal numbers separated by colons, i.e. 00:E0:18:F0:05:C0). Current Channel Displays the radio channel that the card is currently tuned. This number changes as the radio scans the available channels. Current Data Rate Displays the current transmit data rate in megabits per second (Mbps).

* See Chapter 5 - Glossary 26 ASUS WLAN Card Chapter 3 - Reference Radio State Shows the wireless radio on or off. Radio On - When the wireless radio is turned off, the following icon appears in the upper left of the Settings property page. Radio Off - When the wireless radio is turned on, the following icon appears in the upper left of the Settings property page. Rescan Force the radio to rescan all available channels. If your link quality or signal strength is poor, rescanning can be used to push the radio off a weak Access Point and search for a better link with another Access Point. This function will take some time to complete. Change SSID Click on this to set the SSID. Search & Connect Click on this to connect to an available network. Save as Profile Later, when you make individual settings, you may want to use profiles to save your settings. Profiles will help you combine all your settings for work, home, roaming, and other locations so that you do not have to repeat individual settings. When you travel from work to home, for example, choose a home profile that contains all your settings for home use. When you travel back to work, choose an office profile. 3 r e t p a h C s g n i t t e S s w o d n W i Click apply first if you have not. ASUS WLAN Card 27 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Activate Configuration Auto roaming is enabled by default and will automatically switch to stronger access points. You can uncheck it if you have many access points and do not want to constantly switch to different networks. If you want to use a particular profile. You can also check it here. Taskbar Right-Click | Cursor over Activate Configuration 28 ASUS WLAN Card Chapter 3 - Reference Status - Connection Tab You can view the current link statistics about the ASUS WLAN Card. These statistics are updated once per second and are valid only if the ASUS WLAN Card exists. 3 r e t p a h C s g n i t t e S s w o d n W i Scanning Connected Frame Sent/Received Transmitted - The number of frames that were transmitted. Received - The number of frames that were received. Frame Error Transmitted - The number of frames that were not successfully transmitted. Received - The number of frames that were not successfully received. Connection Quality Signal Strength - Reflects the signal level related to the Access Point or Ad Hoc node the station is currently connected to. Ratings are: Excellent, Good, Fair, and Poor. Overall Connection Quality It is derived from the current "Signal Strength". A graph displays a connection quality range between 0 and 100 percent. ASUS WLAN Card 29 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Status - IP Config Tab IP Config tab shows all the current network configuration information for the ASUS WLAN Card. Use it to verify your network settings. IP CONFIG will display all the current TCP/IP configuration values including the IP address, subnet mask, default gateway and Windows Internet Naming Service (WINS) and DNS configuration. Button IP Release - Clicking this button will attempt to release the DHCP IP address for the ASUS WLAN Card in case you wish to remove your IP address. IP Renew - Clicking this button will attempt to renew the DHCP IP address for the ASUS WLAN Card in case you want to obtain a new IP address. NOTE: The IP Release and IP Renew buttons can only be used on the ASUS WLAN Card that is configured with DHCP. 30 ASUS WLAN Card Chapter 3 - Reference Config - Basic Tab Lets you can change the ASUS WLAN Card configurations without rebooting your computer. 3 r e t p a h C s g n i t t e S s w o d n W i Network Type Infrastructure Select the Infrastructure mode to establish a connection with an Access Point. Your computer is able to access wireless LAN and wired LAN (Ethernet), via an associated access point. The Channel field turns to Auto when Infrastructure is selected. Ad Hoc Select the Ad Hoc mode to communicate directly with each other without using an Access Point. An Ad Hoc network is typically formed quickly and easily without pre-planning. For example, share meeting notes between networked computers in a meeting room. Network Name (SSID) Use the SSID field to configure the SSID for the ASUS WLAN Card. You can enter a new SSID or select one from the drop-down list box. SSID stands for Service Set Identifier, which is a string used to identify a wireless LAN. You will only be able to connect Access Points which has the same SSID as the one you set. Use different SSIDs to segment the wireless LAN and increase security. SSIDs must all be printable characters and having a maximum of 32 case sensitive characters, such as Wireless LAN. NOTE: Set the SSID to a null string, if you wish to allow your station to connect to any Access Point it can find. But you cannot use null string in Ad Hoc mode. ASUS WLAN Card 31 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Channel Use the Channel field to select the radio channel for ASUS WLAN Card. In an

"infrastructure" network, your ASUS WLAN Card will automatically select the correct frequency channel required to communicate with an Access Point, this parameter will be fixed in "Auto" and cannot be changed. In an "Ad Hoc"

network, you can decide the channel number for the ASUS WLAN Card. Any ASUS WLAN Card can communicate in the same network if they have the same frequency channel setting. The radio channels you may use depend on the regulations in your country. For United States (FCC) and Canada (IC), channels 1 to 11 are supported. For Europe (ETSI), channels 1 to 13 are supported. For operation in Japan (MKK), channels 1 to 14 are supported. Data Rate Select the transmit data rate (fix or auto). The data rates supported for the ASUS WLAN Cards are:

Auto The adapter will adjust to the most suitable transmission rate. Fix 11b: Fix data rate to 1, 2, 5.5, or 11 megabits per second. Others WEP Click on this to show the "Encryption" tab. Advanced Click on this to show the "Advanced" tab. In most cases, the default values do not have to be changed. Troubleshooting Click on this to show the Troubleshooting utility. Click Apply to save and activate the new configurations. 32 ASUS WLAN Card Chapter 3 - Reference Config - Encryption Tab Lets you configure the ASUS WLAN Card encryption settings. For data confidentiality in a wireless environment, IEEE 802.11 specifies a Wired Equivalent Privacy (WEP) algorithm to offer transmission privacy similar to wired network. The WEP uses keys to encrypt transmit data packets and decrypt received data packets. The encryption process can scramble frame bits to avoid disclosure to others. 3 r e t p a h C s g n i t t e S s w o d n W i Pull Down Menus Data encryption (WEP enabled) This option allows you to enable or disable the Wired Equivalent Privacy (WEP) function. If this check box is selected, a WEP Key is used to encrypt your data before it is transmitted over the air. If you enable WEP encryption, you will only be able to communicate with wireless devices that have use the same WEP keys. WEP Key This option is enable only if you enable WEP Encryption. The WEP Key is a 64 bits (5 byte) or 128 bits (13 byte) Hexadecimal digits that is used to encrypt transmit data packets and decrypt received data packets. Key Format You can enter the WEP Key as a Hexadecimal digits (0~9, a~f, and A~F), or as ASCII characters, based on the state of the Key Format. ASUS WLAN Card 33 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Key Length For 64 bits encryption, each Key contains exactly 10 hex digits, or 5 ASCII characters. For 128 bits encryption, each Key contains exactly 26 hex digits, or 13 ASCII characters. Two ways to assign WEP keys 1. Manual Assignment - When you click this button, the cursor appears in the field for Key 1. For 64-bit encryption, you are required to enter four WEP Keys. Each Key contains exactly 10 hex digits (0~9, a~f, and A~F). For 128-bit encryption, you are required to enter four WEP Keys. Each Key contains exactly 26 hex digits (0~9, a~f, and A~F). 2. Automatic Generation - Type a combination of up to 64 letters, num-

bers, or symbols in the Passphrase column, then the Wireless Settings Utility uses an algorithm to generate four WEP Keys for encryption. NOTE: This function ease users from having to remember their passwords and is compatible to some existing WLAN utilities, but it is not very secure. "Manual Assignment" is more secure. Default Key The Default Key field lets you specify which of the four encryption keys you use to transmit data on your wireless LAN. You can change the default key by clicking on the down arrow at the right of this field, selecting the number of the key you want to use and then clicking the Apply button. As long as the Access Point or station with which you are communicating has the same key in the same position, you can use any of the keys as the default. You then click the Apply button to create your encryption keys. After you click the Apply button, the Wireless Settings Utility uses asterisks to mask your keys. NOTE: Click the Apply or OK button to save the encryption set-

tings. The keys you entered will be masked by asterisks. 34 ASUS WLAN Card Chapter 3 - Reference 64/128bits versus 40/104bits You may be confused about configuring WEP encryption, especially when using multiple wireless LAN products from different vendors. There are two levels of WEP Encryption: 64 bits and 128 bits. First, 64 bit WEP and 40 bit WEP are the same encryption method and can interoperate in the wireless network. This lower level of WEP encryption uses a 40 bit (10 Hex character) as a secret key (set by user), and a 24 bit Initialization Vector (not under user control). This together makes 64 bits (40 + 24). Some vendors refer to this level of WEP as 40 bits and others refer to this as 64 bits. ASUS WLAN products use the term 64 bits when referring to this lower level of encryption. Second, 104 bit WEP and 128 bit WEP are the same encryption method and can interoperate in the wireless network. This higher level of WEP encryption uses a 104 bit (26 Hex character) as a secret key (set by user), and a 24 bit Initialization Vector (not under user control). This together makes 128 bits (104 + 24). Some vendors refer to this level of WEP as 104 bits and others refer to this as 128 bits. ASUS WLAN products use the term 128 bits when referring to this higher level of encryption. 3 r e t p a h C s g n i t t e S s w o d n W i Click Apply to save and activate the new configurations. ASUS WLAN Card 35 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Survey - Site Survey Tab Use the Site Survey tab to view statistics on the wireless networks available to the ASUS WLAN Card. The Site Survey tab is read-only with no user configurable data fields. Use the Site Survey tab to view the following network parameters. BSSID View the IEEE MAC addresses of the available networks. SSID View the SSID (service set identification) within available networks. CH View the direct-sequence channel used by each network. RSSI Views the Received Signal Strength Indication (RSSI) in dB. Type View wireless network status information, the value is either AP (infrastructure) or STA (Ad Hoc). WEP View wireless network WEP encryption information, the value is either OFF (disable encryption) or ON (enable encryption). Some Access Points can disable broadcast-

ing SSID to hide them-

selves from Site Sur-

vey or Site Monitor for added security but still allow you to join if you know their SSID. Buttons Search Scan all available wireless networks and show the scan result in the Available Network List. Connect To associate a network, select it from the Available Network List and click this button. 36 ASUS WLAN Card Chapter 3 - Reference About - Version Info Tab Uses the Version Info tab to view program and ASUS WLAN Card version information. The program version information field includes the Copyright and utility version. The version information includes the NDIS version, driver name, and driver version. 3 r e t p a h C s g n i t t e S s w o d n W i This screen is an example only. Your version numbers will be different from what are shown here. ASUS WLAN Card 37 i W n d o w s S e t t i n g s C h a p t e r 3 Chapter 3 - Reference Link State ASUS WLAN Card Link State icon appears on the left side of the ASUS WLAN Card Settings. Use the icon to view the current signal status. Excellent Link Quality (Infrastructure) Good Link Quality (Infrastructure) Fair Link Quality (Infrastructure) Poor Link Quality (Infrastructure) Not linked (Infrastructure) Exit Wireless Settings To exit Wireless Settings, you can click OK or Cancel. This utility may be closed at any time and from any tab. If you did not save the configuration settings, you will be prompted to do so. 38 ASUS WLAN Card Chapter 3 - Reference Mobile Manager Utility Mobile Manager is a convenient tool to setup and manage network location settings. Mobile Manager lets users configure multiple alternative configurations for different locations. You only need to set this once, and then easily switch configurations when you change your location. Windows Start Menu 3 r e t p a h C r e g a n a M e l i b o M Starting Mobile Manager Click the Windows Start button, select Programs | ASUS Utility |

WLAN Card | Mobile Manager. or Right-click the Control Center icon on the Windows taskbar and then click Mobile Manager. Using Mobile Manager - Quick Guide 1. The first time you launch the Mobile Manager utility, it will automati-

cally generate configurations that stores the current settings of all in-

stalled network devices in your system. 2. Change the name of the configuration to a descriptive name like Work-

Meeting Room or Home-ADSL. 3. On the File menu, click New Configuration, the New Configuration Wizard dialog appears. Follow the on-screen instructions to create your own location configurations. 4. After you have created your configurations, you can see them in the main window. 5. Select the configuration you want to use and then click Activate Con-

figuration from the Activate pull-down menu. Your system will then switch to the network settings configured to your chosen selection. ASUS WLAN Card 39 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference Main Window You can use the Mobile Manager utility main window to create a new configuration, edit a configuration or activate a configuration. The main window includes a menu bar, tool bar, and a list view for showing existing configurations. Using the pull-down menu and toolbar The following topics show the commands available from the Mobile Manager pull-down menu and toolbar. If no configuration is selected, some commands will be grayed out and inaccessible. The toolbar contains buttons for many of the most commonly used commands in Mobile Manager. It allows quick access to some of the most useful features of Mobile Manager. The commands provided by the toolbar buttons are also available from the pull-down menu. File Menu New Configuration - Select New Configuration in the File menu to open a New Configuration Wizard dialog. Use the New Configu-

ration Wizard dialog to create a new configuration. See Using New Configuration Wizard for details on this command. Import Configuration - Load a configuration from an INI File. Export Configuration - Save the selected configuration (contain-

ing Wireless Settings, TCP/IP Settings, Network Settings, ...) to an INI File. The INI file can be placed on a floppy diskette and then imported by other computers using Mobile Manager. This can also be used as a backup feature for yourself. Exit - Close the Mobile Manager utility. 40 ASUS WLAN Card Chapter 3 - Reference Mobilize Menu Auto Roaming If an association changes, it will automatically switch into a network configuration that you have made. If no asso-

ciations have been made, it will automatically connect to a wireless network based on configurations that you specify. Activate Configuration Applies the configuration that you have selected from the list. You may be prompted to restart Windows depending on the required changes. Follow the instructions on the screen. Windows 2000 and XP usually do not require restarting your computer, but Windows 98 and ME usually will require a restart. Edit Menu All these commands are also available from the context menu that appears when you right-click with a configuration in the Mobile Manager window. Edit Configuration - Select Edit Configuration in the Edit menu to open an Edit Configuration dialog to edit selected configuration items. See Using Edit Configuration for details on this command. Rename - Change the name of the selected configuration. Copy - Duplicate the selected configuration. Delete - Discard the selected configuration. View Menu Large Icons - Displays large icons for each configuration. Small Icons - Displays small icons for each configuration. List - Shows the configuration names in a list. Details - The Detailed view expands this list to include information about the configurations. The information includes configuration name, type, and description. 3 r e t p a h C r e g a n a M e l i b o M ASUS WLAN Card 41 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference Help Menu Contents - Displays the WinHelp contents window (the one you are reading now) for online Help. About Mobile Manager - Displays the version number and copy-

right information for Mobile Manager. Click on the logo to connect to ASUS website. 42 ASUS WLAN Card Chapter 3 - Reference New Configuration Wizard Create a new configuration Create a new configuration if you are in a specific location that does not have an existing configuration defined. Use the New Configuration Wizard to create a configuration in a few easy steps. 1. Do one of the following:

On the File menu, click New Configuration. or Double-click New Configuration on the Main window. Then the New Configuration Wizard dialog starts. 2. Choose the type of configuration that you want to create and click Next. Wireless Local Area Network Configuration: You must have an ASUS WLAN Card installed in your PC. Wired Local Area Network Configuration: You must have a NIC (LAN card) (other than ASUS WLAN Card) installed in your PC. Dialup Networking Configuration: You must have a modem in-

stalled in your PC. 3 r e t p a h C r e g a n a M e l i b o M ASUS WLAN Card 43 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference 3. Enter the name and description you want to use for this configuration in the Name and description field. And Click Next. 4. Follow the on-screen instructions, it will guide you through the process of specifying the settings in your configuration. The Wizard reads the current system settings (TCP/IP, NT Domain, Proxy, File, and Printer Sharing) and displays it. Depending on the configuration that you have created, you can set the following groups of settings:

Wireless settings (for Wireless Configuration) Network settings (for Wireless/Wired Configuration) TCP/IP settings (for Wireless/Wired Configuration) Dialing settings (for Dialup Configuration) Dialup Networking settings (for Dialup Configuration) Internet settings (for Wireless/Wired/Dialup Configuration) Sharing settings (for Wireless/Wired/Dialup Configuration) See Using Edit Configuration for detailed information on each. 5. Enter the appropriate information in the wizard. After specifying the appropriate information on each page, click Next to continue. 6. On the final window of the New Configuration Wizard, you will see a Finish button. If you do not want to use this new configuration now, click Finish to save the new configuration. It will be shown in the Mobile Man-

ager main window. or If you want to use this new configuration now, click Mobilize. Edit Configuration Edit an existing configuration Edit a configuration if you want to view or change dialup or LAN settings. On the Edit menu, click Edit Configuration. or Double-click one existing configuration on the Main window. Then the Edit Configuration dialog starts. The Edit Configuration dialog contains various settings, which you select by clicking the buttons at the left of the window. Each setting is described below. 44 ASUS WLAN Card Chapter 3 - Reference General settings Name This field is mandatory, and used for indicating the location from which you are dialing or connecting to the network. For example, if this is used for a meeting room at work, you can use a name like Work-Meeting Room. If it is used for home on your ADSL, you can name like Home-ADSL. Description This field is optional, you can use it to provide more details about this configuration. Network settings Network settings include: Identification and Microsoft Networking. Identification Computer name Give your computer a unique name of up to 15 characters. Thecomputer name is the name that others on your net-

work will see your computer as. For complete compatibility, do not use spaces or symbols. Its generally the same as the DNS hostname, for example, JohnDoe. Workgroup Type an existing workgroup name or create a new workgroup by typing a new name that contains up to 15 characters. Use it to identify your computer group that you belong to. Computer Description This information is displayed as a comment next to the computer name when the computer is seen in Details view

(select from the Windows pull-down menu). Use it to describe your computer, for example, your name, or location. 3 r e t p a h C r e g a n a M e l i b o M Microsoft Networking Logon validation Specify how Windows 9x clients connect to a Win-

dows NT Server Domain at this location.Check Log on to Windows NT domain box if you are using a Windows NT Server in domain control-

ler mode. And then enter the Window NT server domain name in Win-

dow NT domain field. Network logon options Specify how Windows 9x clients try to logon. Select Quick logon to wait until the shared network drives is actually used to attempt the login. Select Logon and restore network connections to logon to all shared network drives when the user logs into Windows. ASUS WLAN Card 45 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference Wireless settings Network Type (see more information in the Ad Hoc section) Infrastructure Select the Infrastructure mode to establish a connec-

tion with an Access Point. Ad Hoc Select the Ad Hoc mode to communicate directly with each other without using an Access Point. SSID Using the SSID filed to configure the SSID setting for the ASUS WLAN Card. SSID stands for Service Set Identifier, which is a string used to identify a wireless LAN. You will only be able to connect with an Access Point, which has the same SSID. Use different SSIDs to segment the wireless LAN and add security. Note that the SSID must be all printable character string (case sensitivity) and up to 32 characters long, such as WIRELESS LAN. Set the SSID to a null string, if you wish to allow your station to connect to any Access Point it can find. But you cannot use null string in Ad Hoc mode. Channel The radio channel used for transmit/receive data. In infrastructure network, your PC Card will automatically select the correct frequency channel required to communicate with an Access Point, this parameter will be fixed in Auto and cant change it. In an Ad Hoc Network, you can decide channel number for the PC Card to operate. PC Cards can communicate in the network if each has the same frequency channel setting. The radio channels you may use depend on the regulations in your country. For United States (FCC) and Canada (IC), channels 1 to 11 are supported. For Europe (ETSI) except Spain and France, channels 1 to 13 are supported. For Spain channel 10 and 11 are supported. For France channels 10 to 13 are supported. For operation in Japan (MKK), channels 1 to 14 are supported. WEP Select enable or disable WEP encryption. Note that if you enable WEP encryption, you will only connect with wireless devices that have the same WEP keys. 46 ASUS WLAN Card Chapter 3 - Reference WEP Key This option is enable only if you enable WEP Encryption. The WEP Key is a 64 bit (5 byte) or 128 bit (13 byte) Hexadecimal digit that is used to encrypt transmit data packets and decrypt received data packets. You have two ways to assign WEP keys:

Automatic Generation - Type a combination of up to 127 letters, numbers, or symbols in the Magic Word column, then it will auto-

matically generate WEP Keys. Manual Assignment - Manual type WEP keys which valid values include numbers, a~f, and A~F. Default Key Determines which entry in the default key table to use for transmitted packets. 3 r e t p a h C r e g a n a M e l i b o M ASUS WLAN Card 47 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference Gateway Specify the gateways. There can be more than one specified.Set up the primary gateway first. Add a gateway - Type the IP address of the gateway in the New Gate-

way field and then click Add. The gateway you specified appears in the Installed Gateways list. Repeat to specify another gateways. The value in each field must be a number between 0 and 255. You can have up to eight IP addresses for gateways. Remove a gateway - Select the gateway from the Installed Gateways list and click Remove. DNS Select Enable or Disable DNS. If you enable DNS, fill the following parameters. Host Enter the name of your computer. That is used to identifier the computer on the Internet. The hostname is generally the same as the Microsoft networking computer name, for example, S82000W. Domain Enter the TCP/IP domain name for your network.The full domain name consists of one or more names that are separated by dots, for example, asus.com. DNS Server Search Order Specify the DNS Servers in the desired order to search for DNS information. Domain Suffix Search Order Add any domain suffixes that may be valid attached to the end of Internet domain name. WINS Specify the WINS server. There can be more than one specified.Set up the primary WINS server first. Disable WINS Resolution Do not use WINS resolution. Enable WINS Resolution Use WINS resolution. Specify the IP ad-

dresses of the WINS servers in the desired search order. Scope ID is used when NetBIOS over TCP/IP is enabling on the workstations. If this protocol has been enabled, then every workstation group must have the same Scope ID for those computers to communicate within the group. The Scope ID is usually left blank. Use DHCP for WINS Resolution If a DHCP server is available that is configured to provide information on available WINS servers. 48 ASUS WLAN Card Chapter 3 - Reference Dialing settings Specify how the call will be dialed. This is useful if you want to change the call to a calling card, use your computer from different locations, or add a dial prefix, country code, or area code automatically. Dialup Networking settings Dialup Networking settings include four tabs: Device, Phone Number, Server Type, and TCP/IP. Device Choose the modem you want to use by Dial-Up Networking to connect to another computer for this connection. Phone Number Specify area code, telephone number, and country code for this connection. Clear the Use area code and Dialing Properties checkbox, if you want to ignore area code and dialing settings. Server Type Type of Dial-Up Server Select the server type for this connection. Advanced options Select Log on to network checkbox to specify that Dial-Up Networking will attempt to log on to the network you are connecting to, using the user name and password you typed when you logged on to Windows. Select Enable software compression checkbox to specify whether incoming or outgoing information is compressed before it is sent. This is useful to speed up the transfer of information. Compression occurs only if both computers are using compatible compression. 3 r e t p a h C r e g a n a M e l i b o M ASUS WLAN Card 49 M o b i l e M a n a g e r C h a p t e r 3 Chapter 3 - Reference Select Require encrypted password checkbox to specify that only encrypted passwords can be sent to or accepted by your computer. This is useful if you need additional security for this connection. When type your password while dialing out, this setting will encrypt your password but the target computer must support encrypted passwords for your password to be understood. Allowed network protocols Specifies the network protocols that your computer can use. Select NetBEUI protocol to connect to Windows NT, Windows for Workgroups, or LAN Manager servers. Select IPX/SPX Compatible protocol to connect to Netware and Win-

dows NT servers and Windows 98 computers. Select TCP/IP protocol to connect to Internet and wide-area networks. TCP/IP Server assigned IP address Specifies whether Dialup Networking accepts an IP address from a ppp server. If the ppp server does not offer an IP address, the IP address specified for TCP/IP Dial-Up Adapter in the Network dialog box is used. Specify an IP address Provides a space for you to type the preferred IP address for this connection. Dial-Up Networking tries to use this address first. Server assigned name server addresses Specifies whether Dial-Up Networking accepts a DNS and WINS server addresses from a ppp server. If the ppp server does not offer DNS and WINS addresses, DNS and WINS server addresses specified for TCP/IP Dial-Up Adapter in the Network dialog box are used. Specify name server addresses Provides a space for you to type one or two DNS and WINS server addresses for this connection only. Dial-

Up Networking tries to use these addresses first. Use IP header compression Specifies whether Dial-Up Networking uses IP header compression for this connection. IP header compression optimizes data transfer between computers. Use default gateway on remote network Specifies whether IP traf-

fic is routed to the WAN connection by default. 50 ASUS WLAN Card Chapter 3 - Reference Internet settings A proxy server acts as a security barrier between your internal network

(Intranet) and the Internet, keeping other people on the Internet from gaining access to confidential information on your internal network or your computer. Disable Proxy Server Do not use proxy server. Enable Proxy Server Use the Proxy server to gain access to the Internet. Use the same proxy server for all protocols Specifies whether you want to use the same proxy server to gain access to the Internet using all protocols. Servers Provides spaces for you to type the address and port number of the proxy server you want to use to gain access to the Internet over HTTP, Secure, FTP, Gopher, and Socks protocol. Exceptions Do not use proxy server for address beginning with Provides a space for you to type the Web addresses that do not need to be accessed through the proxy server. If you want to connect to a computer on your Intranet, make sure you type its address in this box. You can use wild cards to match domain and host names or addresses, for example, *.company.com, 192.72.111.*. Bypass proxy server for local addresses Specifies whether you want to use the proxy server for all local (Intranet) addresses. You might be able to gain access to local addresses easier and faster if you do not use the proxy server. Sharing settings I want to be able to give others access to my files Turn file sharing ON or OFF. File sharing enables people using other computers to read or modify files you share on your computer. I want to be able to allow others to print to my printer(s) Turn printer sharing ON or OFF. Printer sharing enables people using other computers to printer their files on your printers. Click Save button to save all the changes you have made without clos-

ing the Edit Configuration dialog box. Click Cancel button to close the Edit Configuration dialog box without saving any changes you have made. Click Close button to close the Edit Configuration dialog box and save any changes that you have made. ASUS WLAN Card 51 3 r e t p a h C r e g a n a M e l i b o M Chapter 3 - Reference Ad Hoc The ASUS Wireless LAN card when set to Ad Hoc mode can connect to other wireless device(s) in a wireless network called an Ad Hoc network. To connect the ASUS Wireless LAN card to another wireless device:

1. Launch the Wireless Settings util-

ity by double-clicking the Control Center icon in the Windows task-

bar. 2. Click the Survey button to scan available wireless device(s) within the ASUS Wireless LAN cards range. Select the the wireless de-

vice you wish to connect. A wire-

less device is indicated by this icon

). S o f t w a r e R e f e r e n c e C h a p t e r 3 3. Click the Config button to con-

figure the device settings. Set the Network type to Ad Hoc, then enter the Network Name (SSID) and Channel of wireless device you wish to connect. Click Ap-

ply when done. 4. Click the Encryption tab if your selected wireless device has an enabled WEP encryption ( ). Obtain the WEP encryption keys from the network administrator, then enter them in the Key 1 ~ 4 fields. Click Apply when finish. IMPORTANT! The encryption settings of the ASUS Wireless LAN card and the wireless device must be identical to establish a con-

nection. 52 ASUS WLAN Card Chapter 3 - Reference 5. Click the Status button to verify if the ASUS Wireless LAN card is connected to the device. If connection is established, the Association State field shows Connected - XX:XX:XX:XX:XX:XX 6. Click the Connection tab to dis-

play the connection strength and link quality between the ASUS Wireless LAN card and the wire-

less device. 3 r e t p a h C e c n e r e f e R e r a w t f o S ASUS WLAN Card 53 T r o u b l e S h o o t i n g C h a p t e r 3 Windows Start Menu Chapter 3 - Reference Troubleshooting Utility If you have problems connecting to an access point, try the TroubleShooting utility. 1. The first instruction is to Check all the avail-

able wireless networks. For example you can run Site Survey, Site Monitor, or ask your network administrator for correct settings. Click the first box to scan all available wire-

less networks. 2. If you still cannot connect after completing the first instruction, click the first box to reveal a second step. Depending on the utilitys detec-

tion of SSID broadcasts, you will have two possible second instruction. SSID broadcasts detected:

Check the SSID and WEP settings for your card. SSID broadcasts not detected:

Configure your AP to allow Broadcast SSID to associate. or Change your location by a few feet and try again. The main point here is that your ASUS WLAN Cards SSID and WEP security settings must match that of a nearby access point. Move closer to the access point if necessary. 54 ASUS WLAN Card Network Name (SSID) Setting Encryption (security) Settings Chapter 3 - Reference Make sure that the SSID are the same. SSID Broadcasting on the Access Point is not nec-

essary and may be disabled for increased se-

curity. You may enable SSID Broadcasting dur-

ing troubleshooting if necessary. Make sure these are set the same as the ac-

cess point. 3 r e t p a h C g n i t o o h S e l b u o r T 3. If you still cannot connect after completing the second instruction, click the second box to re-

veal a second step. Depending on the utilitys detection of SSID broadcasts, you will have two possible sec-

ond instruction. SSID broadcasts detected:

Consult your LAN administrator whether the MAC address of your Card is added in the APs Authorization table. SSID broadcasts not detected:

Change your settings and try again. The main point here is that your ASUS WLAN Cards MAC address must be allowed and not prohibited from joining the access point. Clicking the last box will send you to the Wireless Settings utility. ASUS WLAN Card 55 T r o u b l e S h o o t i n g C h a p t e r 3 Chapter 3 - Reference Authorization (MAC Address) Settings Your MAC address is shown here. Make sure it is included in the access point Authoriza-

tion Table if it is enabled. Some Authorization Table has an option to exclude or prohibit certain MAC address from joining. In this case, make sure your MAC address is not among them. 4. After configuration is successful, you will get a current status of: You have a connection with an Access Point. You can close the TroubleShooting utility and begin using your wireless network. 56 ASUS WLAN Card Chapter 3 - Reference Windows XP Wireless Properties 1. Double-click System icon in the Control Panel. 2. Double-click ASUS WLAN ... 3 r e t p a h C s e i t r e p o r P s s e l e r i W 3. The General page will show status, dura-

tion, speed, and signal strength. Signal strength is represented by green bars with 5 bars meaning excellent signal and 1 bar meaning poor signal. 4. The Wireless Networks page will show Available networks and Preferred networks. Use the Add button to add the SSID of available networks and set the connection preference order with the Move up and Move down buttons. The radio tower with a signal icon identifies the currently con-

nected access point. ASUS WLAN Card 57 W i r e l e s s P r o p e r t i e s C h a p t e r 3 Chapter 3 - Reference Windows XP Wireless Properties (Cont.) 5. The Authentication page allows you to add security settings. Read Windows help for more information. 6. The Advanced page allows you to set fire-

wall and sharing. Read Windows help for more information. 58 ASUS WLAN Card Chapter 4 - Troubleshooting 4. Troubleshooting The following troubleshooting guides provide answers to some of the more common problems, which you may encounter while installing or using ASUS WLAN Card products. If you encounter difficulties that are not mentioned in this section, please contact ASUS Wireless LAN Technical Support. Verify if the ASUS WLAN Card is installed correctly. When the ASUS WLAN Card setup is complete, you can verify if the driver has been setup properly. Right click My Computer, select Properties, and click the Device Manager tab. Then double-click the Network adapters icon; you should see ASUS 802.11b Network Adapter with an icon of an expansion card. There should not be a ! or ? (problem) or x

(disabled) symbol over this icon. There is a yellow exclamation mark or a yellow question mark in Device Manager in front of my ASUS WLAN Card. To resolve the problem, you should update/reinstall the ASUS WLAN Card driver. In Device Manager, right click ASUS 802.11b Network Adapter, select Properties, and select Driver tab. Click on Update Driver button, then follow the Update Device Driver Wizard to complete the driver installation. In addition, you may be able to resolve this issue by reinstalling the driver. Choose ASUS 802.11b Network Adapter, click Remove button in Device Manager, and then run the Add New Hardware Wizard from the Control Panel. Cannot connect to any Access Points Follow the procedure below to configure your ASUS WLAN Card. a. Verify that the Network Type is in Infrastructure mode. b. Verify that the SSID of your ASUS WLAN Card is set to the same SSID of an Access Point. c. Verify that the Encryption type is the same as that of an Access Point. If you enabled WEP encryption, you must also set the same WEP Keys on both sides. 4 r e t p a h C g n i t o o h s e l b u o r T ASUS WLAN Card 59 Chapter 4 - Troubleshooting Cannot connect to a Station (ASUS WLAN Card) Follow the procedure below to configure your ASUS WLAN Card. a. Verify that the Network Type is in Ad Hoc mode. b. Verify that the SSID of your ASUS WLAN Card is set to the same SSID of the other station (or another ASUS WLAN Card). c. Verify that the channel of the ASUS WLAN Card is Auto or set to the same channel of the other station (or another ASUS WLAN Card). d. Verify that the Encryption type is the same as the other station (or another ASUS WLAN Card). If WEP encryption is enabled, you must set the same WEP Keys on both stations. Bad link quality or bad signal strength There are two possible reasons. First is radio interference, keep the environment around the ASUS WLAN Card away from microwave ovens and large metal objects. Then try to reorient the ASUS WLAN Card antenna. Second is the distance, decrease the distance between your ASUS WLAN Card and the Access Point or station (or another ASUS WLAN Card). The TCP/IP protocol did not bind to the ASUS WLAN PC Card. This will occur when the computer already has six TCP/IP bindings in Windows 98 or ten bindings in Windows Me. These limits are imposed by the Microsoft operating system. Solution: If your computer already has the maximum number of TCP/IP bindings, remove one of the network adapters from the Network configuration before installing the ASUS WLAN Card driver. T r o u b l e s h o o t i n g C h a p t e r 4 60 ASUS WLAN Card Chapter 5 - Glossary 5. Glossary Access Point (AP) An networking device that seamlessly connects wired and wireless networks. Access Points combined with a distributed system support the creation of multiple radio cells that enable roaming throughout a facility. Ad Hoc A wireless network composed solely of stations within mutual communication range of each other (no Access Point). Basic Rate Set This option allows you to specify the data transmission rate. Basic Service Area (BSS) A set of stations controlled by a single coordination function. Broadband A type of data transmission in which a single medium (such as cable) carries several channels of data at once. Channel An instance of medium use for the purpose of passing protocol data units that may be used simultaneously, in the same volume of space, with other instances of medium use

(on other channels) by other instances of the same physical layer, with an acceptably low frame error ratio due to mutual interference. Client A client is the desktop or mobile PC that is connected to your network. COFDM (for 802.11a or 802.11g) Signal power alone is not enough to maintain 802.11b-like distances in an 802.11a/g environment. To compensate, a new physical-layer encoding technology was designed that departs from the traditional direct-sequence technology being deployed today. This technology is called COFDM (coded OFDM). COFDM was developed specifically for indoor wireless use and offers performance much superior to that of spread-spectrum solutions. COFDM works by breaking one high-speed data carrier into several lower-

speed subcarriers, which are then transmitted in parallel. Each high-speed carrier is 20 MHz wide and is broken up into 52 subchannels, each approximately 300 KHz wide. COFDM uses 48 of these subchannels for data, while the remaining four are used for error correction. COFDM delivers higher data rates and a high degree of multipath reflection recovery, thanks to its encoding scheme and error correction. 5 r e t p a h C y r a s s o G l ASUS WLAN Card 61 Chapter 5 - Glossary Each subchannel in the COFDM implementation is about 300 KHz wide. At the low end of the speed gradient, BPSK (binary phase shift keying) is used to encode 125 Kbps of data per channel, resulting in a 6,000-Kbps, or 6 Mbps, data rate. Using quadrature phase shift keying, you can double the amount of data encoded to 250 Kbps per channel, yielding a 12-Mbps data rate. And by using 16-level quadrature amplitude modulation encoding 4 bits per hertz, you can achieve a data rate of 24 Mbps. The 802.11a/g standard specifies that all 802.11a/g-compliant products must support these basic data rates. The standard also lets the vendor extend the modulation scheme beyond 24 Mbps. Remember, the more bits per cycle (hertz) that are encoded, the more susceptible the signal will be to interference and fading, and ultimately, the shorter the range, unless power output is increased. Default Key This option allows you to select the default WEP key. This option allows you to use WEP keys without having to remember or write them down. The WEP keys generated using the Pass Phrase is compatible with other ASUS WLAN products. The Pass Phrase option is not as secure as manual assignment. Device Name Also known as DHCP client ID or network name. Sometimes provided by an ISP when using DHCP to assign addresses. DHCP (Dynamic Host Configuration Protocol) This protocol allows a computer (or many computers on your network) to be automatically assigned a single IP address from a DHCP server. DNS Server Address (Domain Name System) DNS allows Internet host computers to have a domain name and one or more IP addresses. A DNS server keeps a database of host computers and their respective domain names and IP addresses, so that when a user enters a domain name into the Internet browser, the user is sent to the proper IP address. The DNS server address used by the computers on your home network is the location of the DNS server your ISP has assigned. DSL Modem (Digital Subscriber Line) A DSL modem uses your existing phone lines to transmit data at high speeds. Direct-Sequence Spread Spectrum (for 802.11b) Spread spectrum (broadband) uses a narrowband signal to spread the transmission over a segment of the radio frequency band or spectrum. Direct-sequence is a spread spectrum technique where the transmitted signal is spread over a particular frequency range. Direct-sequence systems communicate by continuously transmitting a redundant pattern of bits called a chipping sequence. Each bit of transmitted data is mapped into chips and rearranged into a pseudorandom spreading code to form the chipping sequence. The chipping sequence is combined with a transmitted data stream to produce the output signal. 62 ASUS WLAN Card l G o s s a r y C h a p t e r 5 Chapter 5 - Glossary Wireless mobile clients receiving a direct-sequence transmission use the spreading code to map the chips within the chipping sequence back into bits to recreate the original data transmitted by the wireless device. Intercepting and decoding a direct-sequence transmission requires a predefined algorithm to associate the spreading code used by the transmitting wireless device to the receiving wireless mobile client. This algorithm is established by IEEE 802.11b specifications. The bit redundancy within the chipping sequence enables the receiving wireless mobile client to recreate the original data pattern, even if bits in the chipping sequence are corrupted by interference. The ratio of chips per bit is called the spreading ratio. A high spreading ratio increases the resistance of the signal to interference. A low spreading ratio increases the bandwidth available to the user. The wireless device uses a constant chip rate of 11Mchips/s for all data rates, but uses different modulation schemes to encode more bits per chip at the higher data rates. The wireless device is capable of an 11 Mbps data transmission rate, but the coverage area is less than a 1 or 2 Mbps wireless device since coverage area decreases as bandwidth increases. Encryption This provides wireless data transmissions with a level of security. This option allows you to specify a 64-bit or a 128-bit WEP key. A 64-bit encryption contains 10 hexadecimal digits or 5 ASCII characters. A 128-bit encryption contains 26 hexadecimal digits or 13 ASCII characters. 64-bit and 40-bit WEP keys use the same encryption method and can interoperate on wireless networks. This lower level of WEP encryption uses a 40-bit (10 hexadecimal digits assigned by the user) secret key and a 24-bit Initialization Vector assigned by the device. 104-bit and 128-bit WEP keys use the same encryption method. All wireless clients in a network must have identical WEP keys with the access point to establish connection. Keep a record of the WEP encryption keys. Extended Service Set (ESS) A set of one or more interconnected basic service set (BSSs) and integrated local area networks (LANs) can be configured as an Extended Service Set. ESSID (Extended Service Set Identifier) You must have the same ESSID entered into the gateway and each of its wireless clients. The ESSID is a unique identifier for your wireless network. Ethernet The most widely used LAN access method, which is defined by the IEEE 802.3 standard. Ethernet is normally a shared media LAN meaning all devices on the network segment share total bandwidth. Ethernet networks operate at 10Mbps using CSMA/CD to run over 10-BaseT cables. 5 r e t p a h C y r a s s o G l ASUS WLAN Card 63 Chapter 5 - Glossary Firewall A firewall determines which information passes in and out of a network. NAT can create a natural firewall by hiding a local networks IP addresses from the Internet. A Firewall prevents anyone outside of your network from accessing your computer and possibly damaging or viewing your files. Gateway A network point that manages all the data traffic of your network, as well as to the Internet and connects one network to another. IEEE The Institute of Electrical and Electronics Engineers. The IEEE sets standards for networking, including Ethernet LANs. IEEE standards ensure interoperability between systems of the same type. IEEE 802.11 IEEE 802.xx is a set of specifications for LANs from the Institute of Electrical and Electronic Engineers (IEEE). Most wired networks conform to 802.3, the specification for CSMA/CD based Ethernet networks or 802.5, the specification for token ring networks. 802.11 defines the standard for wireless LANs encompassing three incompatible (non-interoperable) technologies: Frequency Hopping Spread Spectrum

(FHSS), Direct Sequence Spread Spectrum (DSSS), and Infrared. 802.11 specifies a carrier sense media access control and physical layer specifications for 1 and 2 Mbps wireless LANs. IEEE 802.11a (54Mbits/sec) Compared with 802.11b: The 802.11b standard was designed to operate in the 2.4-

GHz ISM (Industrial, Scientific and Medical) band using direct-sequence spread-

spectrum technology. The 802.11a standard, on the other hand, was designed to operate in the more recently allocated 5-GHz UNII (Unlicensed National Information Infrastructure) band. And unlike 802.11b, the 802.11a standard departs from the traditional spread-spectrum technology, instead using a frequency division multiplexing scheme that's intended to be friendlier to office environments. The 802.11a standard, which supports data rates of up to 54 Mbps, is the Fast Ethernet analog to 802.11b, which supports data rates of up to 11 Mbps. Like Ethernet and Fast Ethernet, 802.11b and 802.11a use an identical MAC (Media Access Control). However, while Fast Ethernet uses the same physical-layer encoding scheme as Ethernet (only faster), 802.11a uses an entirely different encoding scheme, called OFDM (orthogonal frequency division multiplexing). The 802.11b spectrum is plagued by saturation from wireless phones, microwave ovens and other emerging wireless technologies, such as Bluetooth. In contrast, 802.11a spectrum is relatively free of interference. l G o s s a r y C h a p t e r 5 64 ASUS WLAN Card Chapter 5 - Glossary The 802.11a standard gains some of its performance from the higher frequencies at which it operates. The laws of information theory tie frequency, radiated power and distance together in an inverse relationship. Thus, moving up to the 5-GHz spectrum from 2.4 GHz will lead to shorter distances, given the same radiated power and encoding scheme. Compared with 802.11g: 802.11a is a standard for access points and radio NICs that is ahead of 802.11g in the market by about six months. 802.11a operates in the 5GHz frequency band with twelve separate non-overlapping channels. As a result, you can have up to twelve access points set to different channels in the same area without them interfering with each other. This makes access point channel assignment much easier and significantly increases the throughput the wireless LAN can deliver within a given area. In addition, RF interference is much less likely because of the less-crowded 5 GHz band. IEEE 802.11b (11Mbits/sec) In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adopted the 802.11 standard for wireless devices operating in the 2.4 GHz frequency band. This standard includes provisions for three radio technologies: direct sequence spread spectrum, frequency hopping spread spectrum, and infrared. Devices that comply with the 802.11 standard operate at a data rate of either 1 or 2 Mbps. In 1999, the IEEE created the 802.11b standard. 802.11b is essentially identical to the 802.11 standard except 802.11b provides for data rates of up to 11 Mbps for direct sequence spread spectrum devices. Under 802.11b, direct sequence devices can operate at 11 Mbps, 5.5 Mbps, 2 Mbps, or 1 Mbps. This provides interoperability with existing 802.11 direct sequence devices that operate only at 2 Mbps. Direct sequence spread spectrum devices spread a radio signal over a range of frequencies. The IEEE 802.11b specification allocates the 2.4 GHz frequency band into 14 overlapping operating Channels. Each Channel corresponds to a different set of frequencies. IEEE 802.11g 802.11g is a new extension to 802.11b (used in majority of wireless LANs today) that broadens 802.11b's data rates to 54 Mbps within the 2.4 GHz band using OFDM

(orthogonal frequency division multiplexing) technology. 802.11g allows backward compatibility with 802.11b devices but only at 11 Mbps or lower, depending on the range and presence of obstructions. Infrastructure A wireless network centered about an access point. In this environment, the access point not only provides communication with the wired network but also mediates wireless network traffic in the immediate neighborhood. IP (Internet Protocol) The TCP/IP standard protocol that defines the IP datagram as the unit of information passed across an Internet and provides the basis for connectionless packet delivery service. IP includes the ICMP control and error message protocol as an integral part. It provides the functional equivalent of ISO OSI Network Services. 5 r e t p a h C y r a s s o G l ASUS WLAN Card 65 Chapter 5 - Glossary IP Address An IP address is a 32-bit number that identifies each sender or receiver of information that is sent across the Internet. An IP address has two parts: the identifier of a particular network on the Internet and an identifier of the particular device (which can be a server or a workstation) within that network. ISM Bands (Industrial, Scientific, and Medicine Bands) Radio frequency bands that the Federal Communications Commission (FCC) authorized for wireless LANs. The ISM bands are located at 902 MHz, 2.400 GHz, and 5.7 GHz. ISP (Internet Service Provider) An organization that provides access to the Internet. Small ISPs provide service via modem and ISDN while the larger ones also offer private line hookups (T1, fractional T1, etc.). LAN (Local Area Network) A communications network that serves users within a defined geographical area. The benefits include the sharing of Internet access, files and equipment like printers and storage devices. Special network cabling (10 Base-T) is often used to connect the PCs together. MAC Address (Media Access Control) A MAC address is the hardware address of a device connected to a network. NAT (Network Address Translation) NAT masks a local networks group of IP addresses from the external network, allowing a local network of computers to share a single ISP account. This process allows all of the computers on your home network to use one IP address. This will enable access to the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. l G o s s a r y C h a p t e r 5 NIC (Network Interface Card) A network adapter inserted into a computer so that the computer can be connected to a network. It is responsible for converting data from stored in the computer to the form transmitted or received. Packet A basic message unit for communication across a network. A packet usually includes routing information, data, and sometimes error detection information. Pass Phrase The Wireless Settings utility uses an algorithm to generate four WEP keys based on the typed combination. 66 ASUS WLAN Card Chapter 5 - Glossary PCMCIA (Personal Computer Memory Card International Association) The Personal Computer Memory Card International Association (PCMCIA), develops standards for PC cards, formerly known as PCMCIA cards. These cards are available in three types, and are about the same length and width as credit cards. However, the different width of the cards ranges in thickness from 3.3 mm (Type I) to 5.0 mm (Type II) to 10.5 mm (Type III). These cards can be used for various functions, including memory storage, land line modems and wireless modems. PPP (Point-to-Point Protocol) PPP is a protocol for communication between computers using a serial interface, typically a personal computer connected by phone line to a server. PPPoE (Point-to-Point Protocol over Ethernet) Point-to-Point Protocol is a method of secure data transmission. PPP using Ethernet to connect to an ISP. Preamble Allows you to set the preamble mode for a network to Long, Short, or Auto. The default preamble mode is Long. Radio Frequency (RF) Terms: GHz, MHz, Hz The international unit for measuring frequency is Hertz (Hz), equivalent to the older unit of cycles per second. One megahertz (MHz) is one million Hertz. One gigahertz

(GHz) is one billion Hertz. The standard US electrical power frequency is 60 Hz, the AM broadcast radio frequency band is 0.55-1.6 MHz, the FM broadcast radio frequency band is 88-108 MHz, and wireless 802.11 LANs operate at 2.4 GHz. SSID (Service Set Identifier) SSID is a group name shared by every member of a wireless network. Only client PCs with the same SSID are allowed to establish a connection. Enabling the Response to Broadcast SSID requests option allows the device to broadcast its SSID in a wireless network. This allows other wireless devices to scan and establish communication with the device. Unchecking this option hides the SSID to prevent other wireless devices from recognizing and connecting to the device. Station Any device containing IEEE 802.11 wireless medium access conformity. Subnet Mask A subnet mask is a set of four numbers configured like an IP address. It is used to create IP address numbers used only within a particular network. 5 r e t p a h C y r a s s o G l ASUS WLAN Card 67 Chapter 5 - Glossary TCP (Transmission Control Protocol) The standard transport level protocol that provides the full duplex, stream service on which many application protocols depend. TCP allows a process or one machine to send a stream of data to a process on another. Software implementing TCP usually resides in the operating system and uses the IP to transmit information across the network. WAN (Wide Area Network) A system of LANs, connected together. A network that connects computers located in separate areas, (i.e., different buildings, cities, countries). The Internet is a wide area network. WECA (Wireless Ethernet Compatibility Alliance) An industry group that certifies cross-vender interoperability and compatibility of IEEE 802.11b wireless networking products and to promote that standard for enterprise, small business, and home environments. WPA (Wi-Fi Protected Access) Wi-Fi Protected Access (WPA) is an improved security system for 802.11. It is part of the 802.11i draft security standard. WPA encompasses TKIP (Temporal Key Integrity Protocol) along with MIC (Message Integrity Check) and other fixes to WEP such as Weak IV (Initialization Vector) filtering and Random IV generation. TKIP uses 802.1x to deploy and change temporary keys as opposed to static WEP keys once used in the past. It is a significant improvement over WEP. WPA is part of a complete security solution. WPA also requires authentication servers in enterprise security solutions. Requirements

(1) A WPA compatible Access Point or Wireless router, (2) Operating system updates that support WPA. In XP, an updated Windows Zero Config service is needed. Users can download the Windows XP WPA patch here:

http://microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4-ABEC-274845DC9E91&displaylang=en Please note that this patch requires the installation Windows XP Service Pack 1, which is available here: http://www.microsoft.com/WindowsXP/pro/downloads/servicepacks/

sp1/default.asp For earlier Windows Operating systems, a WPA capable supplicant is required such as Funk Softwares Odyssey Client. WLAN (Wireless Local Area Network) This is a group of computers and other devices connected wirelessly in a small area. A wireless network is referred to as LAN or WLAN. l G o s s a r y C h a p t e r 5 68 ASUS WLAN Card Chapter 6 - Appendix 6. Safety Information Federal Communications Commission This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to con-

nect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office. ASUS WLAN Card 69 6 r e t p a h C x i d n e p p A Chapter 6 - Appendix FCC Radio Frequency Interference Requirements MPE Statement: Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25GHz to reduce the potential for harmful interference to co-channel of the Mobile Satellite Systems. High power radars are allocated as primary user of the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands. These radar stations can cause interference with and /

or damage this device. FCC RF Exposure Guidelines (Access Points) This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation as a mobile or portable device but use in a body-worn way is strictly prohibit. When using this device, a certain separation distance between antenna and nearby persons has to be kept to ensure RF exposure compliance. In order to comply with the RF exposure limits established in the ANSI C95.1 standards, Access Point equipment should be installed and operated with minimum distance [20cm] between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. CAUTION: Any changes or modifications not expressly approved in this manual could void your authorization to use this device. A p p e n d i x C h a p t e r 6 70 ASUS WLAN Card Chapter 6 - Appendix FCC RF Exposure Guidelines (Wireless Cards) This device has been tested for compliance with FCC RF Exposure (SAR) limits in typical portable configurations. In order to comply with SAR limits established in the ANSI C95.1 standards, it is recommended when using a WLAN Card adapter that the integrated antenna is positioned more than [2.5cm] from your body or nearby persons during extended periods of operation. If the antenna is positioned less than [2.5cm]

from the user, it is recommended that the user limit the exposure time. Canadian Department of Communications This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Operation Channel for Different Domains N. America Japan Europe ETSI Ch01 through CH11 Ch01 through Ch14 Ch01 through Ch13 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.472 GHz 6 r e t p a h C x i d n e p p A ASUS WLAN Card 71 Chapter 6 - Appendix France Restricted Frequency Band Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors is:

10mW for the entire 2.4 GHz band (2400 MHz2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz. There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.52483.5 MHz band. Use outdoors on public property is not permitted. In the departments listed below, for the entire 2.4 GHz band:

Maximum authorized power indoors is 100mW Maximum authorized power outdoors is 10mW Departments in which the use of the 24002483.5 MHz band is permitted with an EIRP of less than 100mW indoors and less than 10mW outdoors:

01 Ain Orientales 02 Aisne 03 Allier 05 Hautes Alpes 08 Ardennes 09 Arige 11 Aude 12 Aveyron 16 Charente 24 Dordogne 25 Doubs 26 Drme 32 Gers 36 Indre 37 Indre et Loire 41 Loir et Cher 42 Loire 45 Loiret 50 Manche 55 Meuse 58 Nivre 59 Nord 60 Oise 61 Orne 63 Puy du Dme 64 Pyrnes Atlantique 66 Pyrnes 67 Bas Rhin 68 Haut Rhin 70 Haute Sane 71 Sane et Loire 75 Paris 82 Tarn et Garonne 84 Vaucluse 88 Vosges 89 Yonne 90 Territoire de Belfort 94 Val de Marne This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) NOTE: Your ASUS WLAN Card transmits less than 100mW, but more than 10mW. A p p e n d i x C h a p t e r 6 72 ASUS WLAN Card