FCC ID: MSQ7265NG Intel Dual Band Wireless-AC 7265

by: ASUSTeK Computer Inc latest update: 2017-04-28 model: 7265NG

Sixty Three grants have been issued under this FCC ID from 10/20/2014 to 04/28/2017 (this is one of one hundred and fifty releases in 2017 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked drivers, warrantee terms, password defaults, troubleshooting guides, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (7265NGW) UserMan Users Manual pdf 525.46 KiB February 11 2016
various (7265NGW) UserMan-part1 Users Manual pdf 2.81 MiB
various (7265NGW) UserMan-part2 Users Manual pdf 4.33 MiB
various (7265NGW) UserMan 20151231 Users Manual pdf 4.96 MiB
various (7265NGW) UserMan 20161014 Users Manual pdf 4.98 MiB
various (7265NGW) UserMan part1 Q524U, Q534U 20160617 Users Manual pdf 4.18 MiB August 07 2016 / October 07 2016
various (7265NGW) UserMan part2 Q524U, Q534U 20160617 Users Manual pdf 2.39 MiB August 07 2016 / October 07 2016
various User manual Users Manual pdf 871.12 KiB
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf January 05 2017
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Test Report pdf
various Cover Letter(s) pdf February 11 2016
various Cover Letter(s) pdf February 11 2016
various Cover Letter(s) pdf February 11 2016
various Cover Letter(s) pdf February 11 2016
various Cover Letter(s) pdf February 11 2016
various Cover Letter(s) pdf February 11 2016
various External Photos pdf February 11 2016
various Internal Photos pdf February 11 2016
various ID Label/Location Info pdf February 11 2016
various ID Label/Location Info pdf February 11 2016
various RF Exposure Info pdf February 11 2016
various Test Setup Photos pdf February 11 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf August 07 2016 / October 07 2016
various Cover Letter(s) pdf August 07 2016 / October 07 2016
various Cover Letter(s) pdf August 07 2016 / October 07 2016
various Cover Letter(s) pdf August 07 2016 / October 07 2016
various Cover Letter(s) pdf August 07 2016 / October 07 2016
various External Photos pdf August 07 2016 / October 07 2016
various Internal Photos pdf August 07 2016 / October 07 2016
various ID Label/Location Info pdf August 07 2016 / October 07 2016
various ID Label/Location Info pdf August 07 2016 / October 07 2016
various RF Exposure Info pdf August 07 2016 / October 07 2016
various Test Setup Photos pdf August 07 2016 / October 07 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Parts List/Tune Up Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Internal Photos pdf / July 04 2016
various RF Exposure Info pdf / July 04 2016
various External Photos pdf July 04 2016
various External Photos pdf
various Internal Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf
various Test Report pdf
various Cover Letter(s) pdf
various Internal Photos pdf February 02 2016
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Cover Letter(s) pdf
various Internal Photos pdf
various Internal Photos pdf
various (7265NGW) UserMan Users Manual pdf 525.46 KiB February 11 2016
various (7265NGW) UserMan-part1 Users Manual pdf 2.81 MiB
various (7265NGW) UserMan-part2 Users Manual pdf 4.33 MiB
various (7265NGW) UserMan 20151231 Users Manual pdf 4.96 MiB
various (7265NGW) UserMan 20161014 Users Manual pdf 4.98 MiB
various (7265NGW) UserMan part1 Q524U, Q534U 20160617 Users Manual pdf 4.18 MiB August 07 2016 / October 07 2016
various (7265NGW) UserMan part2 Q524U, Q534U 20160617 Users Manual pdf 2.39 MiB August 07 2016 / October 07 2016
various User manual Users Manual pdf 871.12 KiB

frequency equipment class purpose
1 2017-04-28 2422 ~ 2452 DTS - Digital Transmission System Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
4 2016-11-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 2422 ~ 2452 DTS - Digital Transmission System
7 2016-10-17 2422 ~ 2452 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2016-09-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 2422 ~ 2452 DTS - Digital Transmission System
12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2016-07-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 2422 ~ 2452 DTS - Digital Transmission System
16 2016-07-10 2422 ~ 2452 DTS - Digital Transmission System
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
19 2016-06-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
21 2422 ~ 2452 DTS - Digital Transmission System
22 2016-05-31 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
23 2016-05-30 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
24 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
25 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
26 2016-05-29 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
27 2016-05-27 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
28 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
29 2016-05-23 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
30 2016-04-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
32 5755 ~ 5795 DTS - Digital Transmission System
33 2016-03-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 5755 ~ 5795 DTS - Digital Transmission System
35 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
36 2016-01-18 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
37 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 5755 ~ 5795 DTS - Digital Transmission System
39 2015-12-31 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
40 5755 ~ 5795 DTS - Digital Transmission System
41 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 2015-12-17 5755 ~ 5795 DTS - Digital Transmission System
43 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
44 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
45 2015-12-15 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
46 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 5755 ~ 5795 DTS - Digital Transmission System
48 2015-08-31 5755 ~ 5795 DTS - Digital Transmission System
49 5755 ~ 5795 DTS - Digital Transmission System
50 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
51 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
52 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
53 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
54 2015-04-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
56 5755 ~ 5795 DTS - Digital Transmission System
57 2014-11-25 5755 ~ 5795 DTS - Digital Transmission System
58 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
59 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
60 2014-10-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
61 JBP - Part 15 Class B Computing Device Peripheral
62 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
63 5755 ~ 5795 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2017-04-28
various 2016-11-02
various 2016-10-17
various 2016-09-05
various 2016-07-19
various 2016-07-10
various 2016-06-29
various 2016-05-31
various 2016-05-30
various 2016-05-29
various 2016-05-27
various 2016-05-23
various 2016-04-07
various 2016-03-15
various 2016-01-18
various 2015-12-31
various 2015-12-17
various 2015-12-15
various 2015-08-31
various 2015-04-24
various 2014-11-25
various 2014-10-20
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 4F, No. 150, Li-Te Rd.
various Peitou, Taipei, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address t******@siemic.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code 7265NG
app s Person at the applicant's address to receive grant or for contact
various Name J**** Y****
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name QuieTek Corporation
various QuieTek
various Quietek
various Name V****** W********
various M****** C******
various Physical Address No.159, Sec. 2, Wenhua 1st Rd., Linkou Dist
various No. 5-22, Rueishu Keng, Linkou Dist.
various New Taipei City, 24457
various New Taipei City, 24451
various New Taipei City
various Taiwan
various Telephone Number 886-2******** Extension:
various 886-2******** Extension:
various 886-2********
various Fax Number 886-2********
various 886-2********
various E-mail v******@quietek.com
various m******@quietek.com
various m******@quietek.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/26/2017
various01/09/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 7265
variousINTEL DUAL BAND WIRELESS-AC 7265
variousWireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsCIIPC to add host ASUS Notebook PC model C213S, C213N. The highest reported SAR is 0.29 W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.79 W/kg. Simultaneous TX: 1.04W/kg. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets.
variousCIIPC to add host ASUS Notebook PC model C213S, C213N. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End- users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.04 W/kg. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets.
variousCIIPC to add host ASUS Notebook PC model C213S, C213N. The highest reported SAR is 1.18 W/kg. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.79W/kg. Simultaneous TX: 1.04W/kg. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable con?gurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host con?gurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this ?ling cannot be met installation of this device into speci?c ?nal products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO con?guration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this ?ling. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) request approval for portable category specific host notebook PC, model number: ASUS, E403N, L403N, R416N, X400N with antenna TONGDA, part no. T-543-3010680-A, 14008-01140200 and LUXSHARE, part no. LA05RF917-1H, 14008-01140300. (2) decrease in the WLAN Output Power through firmware. The highest measured body SAR values are: 0.91 W/kg. Simultaneous TX: 1.08 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: (1) request approval for portable category specific host notebook PC, model number: ASUS, E403N, L403N, R416N, X400N with antenna TONGDA, part no. T-543-3010680-A, 14008-01140200 and LUXSHARE, part no. LA05RF917-1H, 14008-01140300. (2) decrease in the WLAN Output Power through firmware. Simultaneous SAR is 1.08 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific ?nal products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) request approval for portable category specific host notebook PC, model number: ASUS, E403N, L403N, R416N, X400N with antenna TONGDA, part no. T-543-3010680-A, 14008-01140200 and LUXSHARE, part no. LA05RF917-1H, 14008-01140300. (2) decrease in the WLAN Output Power through firmware. The highest measured body SAR values are: 0.76 W/kg. Simultaneous TX: 0.74 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power. (2) request approval for portable category specific host notebook PC, model number: ASUS, C302C with antenna ACON, part no. ANF6Y-100024, ANF6Y-100025, 14008-02030200, 14008-02030300 and INPAQ, part no. WA-F-LB-02-086, WA-F-LB-01-039, 14008-02030000, 14008-02030100. (3) decrease in the WLAN Output Power on the PAD mode through firmware. The highest measured body SAR values are: 1.08 W/kg. Simultaneous TX: 1.25 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: (1) For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power. (2) request approval for portable category specific host notebook PC, model number: ASUS, C302C with antenna ACON, part no. ANF6Y-100024, ANF6Y-100025, 14008-02030200, 14008-02030300 and INPAQ, part no. WA-F-LB-02-086, WA-F-LB-01-039, 14008-02030000, 14008-02030100. (3) decrease in the WLAN Output Power on the PAD mode through firmware. Simultaneous SAR is 1.35 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this ?ling cannot be met installation of this device into specific ?nal products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this ?ling. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: (1) For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power. (2) request approval for portable category specific host notebook PC, model number: ASUS, C302C with antenna ACON, part no. ANF6Y-100024, ANF6Y-100025, 14008-02030200, 14008-02030300 and INPAQ, part no. WA-F-LB-02-086, WA-F-LB-01-039, 14008-02030000, 14008-02030100. (3) decrease in the WLAN Output Power on the PAD mode through firmware. The highest measured body SAR values are: 1.18 W/kg. Simultaneous TX: 1.35 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host notebook PC, model number: ASUS UX330U, U3100, U330U with antenna INPAQ, part no. WA-F-LBLB-02-011, 14008-01900000 and TongDa, part no. T-543-3010600-A, 14008-01900100.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host notebook PC, model number: ASUS UX330U, U3100, U330U with antenna INPAQ, part no. WA-F-LBLB-02-011, 14008-01900000 and TongDa, part no. T-543-3010600-A, 14008-01900100. The highest measured body SAR values are: 0.45 W/kg. Simultaneous TX: 0.57 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host notebook PC, model number: ASUS UX330U, U3100, U330U with antenna INPAQ, part no. WA-F-LBLB-02-011, 14008-01900000 and TongDa, part no. T-543-3010600-A, 14008-01900100. The highest measured body SAR values are: 1.06 W/kg. Simultaneous TX: 0.79 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX360U, with antenna Hong Lin, part no. 260-26116, 14008-01720200 and LUXSHARE, part no. LA38LN001-1H, 14008-01720300. Simultaneous SAR is 1.28 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX360U, with antenna Hong Lin, part no. 260-26116, 14008-01720200 and LUXSHARE, part no. LA38LN001-1H, 14008-01720300. The highest measured body SAR values are: 1.19 W/kg. Simultaneous TX: 1.28 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX360U, with antenna Hong Lin, part no. 260-26116, 14008-01720200 and LUXSHARE, part no. LA38LN001-1H, 14008-01720300. The highest measured body SAR values are: 1.16 W/kg. Simultaneous TX: 0.79 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q524U, Q534U with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600, 14008-01840700 and INPAQ, part no. WA-F-LB-02-079, WA-F-LB-01-035, 14008-01840400, 14008-01840500. And decrease in the WLAN Output Power of table mode through firmware. The highest measured body SAR values are: 1.20 W/kg. Simultaneous TX: 1.37 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q524U, Q534U with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600, 14008-01840700 and INPAQ, part no. WA-F-LB-02-079, WA-F-LB-01-035, 14008-01840400, 14008-01840500. And decrease in the WLAN Output Power of table mode through firmware. Simultaneous SAR is 1.37 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q524U, Q534U with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600, 14008-01840700 and INPAQ, part no. WA-F-LB-02-079, WA-F-LB-01-035, 14008-01840400, 14008-01840500. And decrease in the WLAN Output Power of table mode through firmware. The highest measured body SAR values are: 1.09 W/kg. Simultaneous TX: 1.26 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB-01-036, 14008-01840000, 14008-01840100. And decrease in the WLAN Output Power of table mode through firmware. The highest measured body SAR values are: 1.17 W/kg. Simultaneous TX: 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB-01-036, 14008-01840000, 14008-01840100. And decrease in the WLAN Output Power of table mode through firmware. Simultaneous SAR is 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change with request approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB-01-036, 14008-01840000, 14008-01840100. And decrease in the WLAN Output Power of table mode through firmware. The highest measured body SAR values are: 0.46 W/kg. Simultaneous TX: 0.63 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q552U, with antenna ACON, part no. ANF6Y-200002. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.24 W/kg. Simultaneous transmission: 0.49 W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP501U, J501U and R518U, with antenna INPAQ, part no. WA-P-LB-02-300 (Main), WA-P-LB-01-141 (Aux) and LUXSHARE, part no. LA05RF873-2H (Main), LA05RF873-1H (Aux) The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.20 W/kg. Simultaneous transmission: 1.34 W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek Q304U, with antenna Hong Lin, part no. 14008-01790000 (Main), 14008- 01790100 (Aux) and Hong Lin, part no. 260-26104 (Main), 260-26105 (Aux). Highest reported Body and Simultaneous SAR values are: 1.11W/kg and 1.28W/kg respectively. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the 5GHz bands WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q553U, with antenna INPAQ, part no. WAFLB02065 (Main), WAFLB01?032 (Aux) and Hong Lin, part no. 26026091 (Main), 26026092 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.14 W/kg. Simultaneous transmission: 1.35W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q503U, with antenna INPAQ, part no. WA-F-LB-02-051 (Main), WA-F-LB-02-029 (Aux) and Hong Lin, part no. 260-26074 (Main), 260-26075 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.76 W/kg. Simultaneous transmission: 1.57 W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010300-A and INPAQ, part no. WA-FLBLB-02-005. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.88 W/kg. Simultaneous transmission: 1.01 W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP301U, Q303U, with antenna LUXSHARE, part no. LA05RF867-1H (Main), LA05RF868-1H (Aux) and Hong Lin, part no. 26026076 (Main), 26026077 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.20 W/kg. Simultaneous transmission: 1.38 W/kg. Class II Permissive Change: This change is for a device previously granted under rule parts of 15.247( Band 3) and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.79W/kg. Simultaneous TX: 1.04W/kg. Change is to establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets. Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek Q304U, with antenna Hong Lin, part no. 14008-01790000 (Main), 14008-01790100 (Aux) and Hong Lin, part no. 260-26104 (Main), 260-26105 (Aux). Highest reported Body and Simultaneous SAR values are: 0.17W/kg and 1.36W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek Q304U, with antenna Hong Lin, part no. 14008-01790000 (Main), 14008-01790100 (Aux) and Hong Lin, part no. 260-26104 (Main), 260-26105 (Aux). Highest reported Body and Simultaneous SAR values are: 1.11W/kg and 1.28W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek Q304U, with antenna Hong Lin, part no. 14008-01790000 (Main), 14008-01790100 (Aux) and Hong Lin, part no. 260-26104 (Main), 260-26105 (Aux). Highest reported Body and Simultaneous SAR values are: 1.19W/kg and 1.36W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­ users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 0.75 W/kg. Class II Permissive Change to request approval for portable category specific host tablet PC, model number: ASUS T300 Chi, with antenna ACON, part no. APF6Y-100000 (Main), APF6Y-100001 (Aux) and INPAQ, part no. WA-F-LB-02-042 (Main), WA-F-LB-01-023 (Aux).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change to request approval for portable category specific host tablet PC, model number: ASUS T300 Chi, with antenna ACON, part no. APF6Y-100000 (Main), APF6Y-100001 (Aux) and INPAQ, part no. WA-F-LB-02-042 (Main), WA-F-LB-01-023 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.58 W/kg. Simultaneous transmission: 0.75 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change to request approval for portable category specific host tablet PC, model number: ASUS T300 Chi, with antenna ACON, part no. APF6Y-100000 (Main), APF6Y-100001 (Aux) and INPAQ, part no. WA-F-LB-02-042 (Main), WA-F-LB-01-023 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.58 W/kg. Simultaneous transmission: 0.75 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP501U, J501U and R518U, with antenna INPAQ, part no. WA-P-LB-02-300 (Main), WA-P-LB-01-141 (Aux) and LUXSHARE, part no. LA05RF873-2H (Main), LA05RF873-1H (Aux) The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.20 W/kg. Simultaneous transmission: 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­ users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.34 W/kg. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP501U, J501U and R518U, with antenna INPAQ, part no. WA-P-LB-02-300 (Main), WA-P-LB-01-141 (Aux) and LUXSHARE, part no. LA05RF873-2H (Main), LA05RF873-1H (Aux)
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP501U, J501U and R518U, with antenna INPAQ, part no. WA-P-LB-02-300 (Main), WA-P-LB-01-141 (Aux) and LUXSHARE, part no. LA05RF873-2H (Main), LA05RF873-1H (Aux) The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.20 W/kg. Simultaneous transmission: 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP301U, Q303U, with antenna LUXSHARE, part no. LA05RF867-1H (Main), LA05RF868-1H (Aux) and Hong Lin, part no. 260­26076 (Main), 260­26077 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.20 W/kg. Simultaneous transmission: 1.38 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP301U, Q303U, with antenna LUXSHARE, part no. LA05RF867-1H (Main), LA05RF868-1H (Aux) and Hong Lin, part no. 260­26076 (Main), 260­26077 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.18 W/kg. Simultaneous transmission: 1.36 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­ users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.38 W/kg. Class II Permissive Change for Reduce WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS TP301U, Q303U, with antenna LUXSHARE, part no. LA05RF867-1H (Main), LA05RF868-1H (Aux) and Hong Lin, part no. 260­26076 (Main), 260­26077 (Aux).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the 5GHz bands WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q553U, with antenna INPAQ, part no. WA­F­LB­02­065 (Main), WA­F­LB­01­032 (Aux) and Hong Lin, part no. 260­26091 (Main), 260­26092 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.08 W/kg. Simultaneous transmission: 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­ users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.35 W/kg. Class II Permissive Change for Reduce the 5GHz bands WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q553U, with antenna INPAQ, part no. WA­F­LB­02­065 (Main), WA­F­LB­01­032 (Aux) and Hong Lin, part no. 260­26091 (Main), 260­26092 (Aux).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi­ transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the 5GHz bands WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q553U, with antenna INPAQ, part no. WA­F­LB­02­065 (Main), WA­F­LB­01­032 (Aux) and Hong Lin, part no. 260­26091 (Main), 260­26092 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.14 W/kg. Simultaneous transmission: 1.35 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.79W/kg. Simultaneous TX: 1.04W/kg. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End- users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.04 W/kg. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.79 W/kg. Simultaneous TX: 1.04W/kg. Change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance and KDB 616217 D04 for Laptop and Tablets.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q552U, with antenna ACON, part no. ANF6Y-200002. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.10 W/kg. Simultaneous transmission: 1.30 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q503U, with antenna INPAQ, part no. WA-F-LB-02-051 (Main), WA-F-LB-02-029 (Aux) and Hong Lin, part no. 260-26074 (Main), 260-26075 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.05 W/kg. Simultaneous transmission: 1.45 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q552U, with antenna ACON, part no. ANF6Y-200002. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.24 W/kg. Simultaneous transmission: 0.49 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15 - 5.25GHz and 5.47 - 5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q503U, with antenna INPAQ, part no. WA-F-LB-02-051 (Main), WA-F-LB-02-029 (Aux) and Hong Lin, part no. 260-26074 (Main), 260-26075 (Aux). The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.76 W/kg. Simultaneous transmission: 1.57 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.11 W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q503U, with antenna INPAQ, part no. WA-F-LB-02-051 (Main), WA-F-LB-02-029 (Aux) and Hong Lin, part no. 260-26074 (Main), 260-26075 (Aux).
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.30 W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS Q552U, with antenna ACON, part no. ANF6Y-200002.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.11 W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010300-A and INPAQ, part no. WA-F-LBLB-02-005
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010300-A and INPAQ, part no. WA-F-LBLB-02-005. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.88 W/kg. Simultaneous transmission: 1.01 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010300-A and INPAQ, part no. WA-F-LBLB-02-005 The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.98 W/kg. Simultaneous transmission: 1.11 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010103-A and INPAQ, part no. WA-F-LBLB-02-003. The highest measurement body SAR value at 5.0mm antenna­ to ­user separation distance in this Tablet Computer host is: 1.18 W/kg. Simultaneous transmission: 1.31 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010103-A and INPAQ, part no. WA-F-LBLB-02-003. The highest measurement body SAR value at 5.0mm antenna­ to ­user separation distance in this Tablet Computer host is: 1.16 W/kg. Simultaneous transmission: 1.29 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.31 W/kg. Class II Permissive Change for Reduce the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS UX305F, with antenna TONGDA, part no. T-543-3010103-A and INPAQ, part no. WA-F-LBLB-02-003.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.79W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be collocated with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various DEKRA Testing and Certification Co., Ltd.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Name E****** L****
various S******** H****
various Telephone Number +886-********
various 886-2******** Extension:
various +886-******** Extension:
various Fax Number +886-********
various 886-2********
various +886-********
various E-mail e******@tw.bureauveritas.com
various s******@quietek.com
various s******@dekra.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.002
1 2 15C CC MO 2412 2462 0.104
1 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.028
3 2 15E 38 CC MO 5190 5230 0.044
3 3 15E 38 CC MO ND 5260 5320 0.047
3 4 15E 38 CC MO ND 5270 5310 0.092
3 5 15E 38 CC MO ND 5500 5700 0.058
3 6 15E 38 CC MO ND 5510 5670 0.047
3 7 15E 38 CC MO ND 5720 5720 0.044
3 8 15E 38 CC MO ND 5710 5710 0.044
3 9 15E 38 CC MO ND 5530 5690 0.091
3 1 15E 38 CC MO 5745 5825 0.0454
3 11 15E 38 CC MO 5755 5795 0.0386
3 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E 38 CC MO 5180 5240 0.028
4 2 15E 38 CC MO 5190 5230 0.044
4 3 15E 38 CC MO ND 5260 5320 0.047
4 4 15E 38 CC MO ND 5270 5310 0.092
4 5 15E 38 CC MO ND 5500 5700 0.058
4 6 15E 38 CC MO ND 5510 5670 0.047
4 7 15E 38 CC MO ND 5720 5720 0.044
4 8 15E 38 CC MO ND 5710 5710 0.044
4 9 15E 38 CC MO ND 5530 5690 0.091
4 1 15E 38 CC MO 5745 5825 0.0454
4 11 15E 38 CC MO 5755 5795 0.0386
4 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.002
6 2 15C CC MO 2412 2462 0.104
6 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.002
7 2 15C CC MO 2412 2462 0.104
7 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.028
9 2 15E 38 CC MO 5190 5230 0.044
9 3 15E 38 CC MO ND 5260 5320 0.047
9 4 15E 38 CC MO ND 5270 5310 0.092
9 5 15E 38 CC MO ND 5500 5700 0.058
9 6 15E 38 CC MO ND 5510 5670 0.047
9 7 15E 38 CC MO ND 5720 5720 0.044
9 8 15E 38 CC MO ND 5710 5710 0.044
9 9 15E 38 CC MO ND 5530 5690 0.091
9 1 15E 38 CC MO 5745 5825 0.0456
9 11 15E 38 CC MO 5755 5795 0.0899
9 12 15E 38 CC MO 5775 5775 0.0897
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.002
11 2 15C CC MO 2412 2462 0.104
11 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 38 CC MO 5180 5240 0.028
12 2 15E 38 CC MO 5190 5230 0.044
12 3 15E 38 CC MO ND 5260 5320 0.047
12 4 15E 38 CC MO ND 5270 5310 0.092
12 5 15E 38 CC MO ND 5500 5700 0.058
12 6 15E 38 CC MO ND 5510 5670 0.047
12 7 15E 38 CC MO ND 5720 5720 0.044
12 8 15E 38 CC MO ND 5710 5710 0.044
12 9 15E 38 CC MO ND 5530 5690 0.091
12 1 15E 38 CC MO 5745 5825 0.0454
12 11 15E 38 CC MO 5755 5795 0.0386
12 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.028
14 2 15E 38 CC MO 5190 5230 0.044
14 3 15E 38 CC MO ND 5260 5320 0.047
14 4 15E 38 CC MO ND 5270 5310 0.092
14 5 15E 38 CC MO ND 5500 5700 0.058
14 6 15E 38 CC MO ND 5510 5670 0.047
14 7 15E 38 CC MO ND 5720 5720 0.044
14 8 15E 38 CC MO ND 5710 5710 0.044
14 9 15E 38 CC MO ND 5530 5690 0.091
14 1 15E 38 CC MO 5745 5825 0.0454
14 11 15E 38 CC MO 5755 5795 0.0386
14 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.002
15 2 15C CC MO 2412 2462 0.104
15 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.002
16 2 15C CC MO 2412 2462 0.104
16 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E 38 CC MO 5180 5240 0.028
18 2 15E 38 CC MO 5190 5230 0.044
18 3 15E 38 CC MO ND 5260 5320 0.047
18 4 15E 38 CC MO ND 5270 5310 0.092
18 5 15E 38 CC MO ND 5500 5700 0.058
18 6 15E 38 CC MO ND 5510 5670 0.047
18 7 15E 38 CC MO ND 5720 5720 0.044
18 8 15E 38 CC MO ND 5710 5710 0.044
18 9 15E 38 CC MO ND 5530 5690 0.091
18 1 15E 38 CC MO 5745 5825 0.0454
18 11 15E 38 CC MO 5755 5795 0.0386
18 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.028
19 2 15E 38 CC MO 5190 5230 0.044
19 3 15E 38 CC MO ND 5260 5320 0.047
19 4 15E 38 CC MO ND 5270 5310 0.092
19 5 15E 38 CC MO ND 5500 5700 0.058
19 6 15E 38 CC MO ND 5510 5670 0.047
19 7 15E 38 CC MO ND 5720 5720 0.044
19 8 15E 38 CC MO ND 5710 5710 0.044
19 9 15E 38 CC MO ND 5530 5690 0.091
19 1 15E 38 CC MO 5745 5825 0.0454
19 11 15E 38 CC MO 5755 5795 0.0386
19 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.002
21 2 15C CC MO 2412 2462 0.104
21 3 15C CC MO 2422 2452 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC MO 5180 5240 0.028
22 2 15E 38 CC MO 5190 5230 0.044
22 3 15E 38 CC MO ND 5260 5320 0.047
22 4 15E 38 CC MO ND 5270 5310 0.092
22 5 15E 38 CC MO ND 5500 5700 0.058
22 6 15E 38 CC MO ND 5510 5670 0.047
22 7 15E 38 CC MO ND 5720 5720 0.044
22 8 15E 38 CC MO ND 5710 5710 0.044
22 9 15E 38 CC MO ND 5530 5690 0.091
22 1 15E 49 CC MO 5745 5825 0.045
22 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E 38 CC MO 5180 5240 0.028
23 2 15E 38 CC MO 5190 5230 0.044
23 3 15E 38 CC MO ND 5260 5320 0.047
23 4 15E 38 CC MO ND 5270 5310 0.092
23 5 15E 38 CC MO ND 5500 5700 0.058
23 6 15E 38 CC MO ND 5510 5670 0.047
23 7 15E 38 CC MO ND 5720 5720 0.044
23 8 15E 38 CC MO ND 5710 5710 0.044
23 9 15E 38 CC MO ND 5530 5690 0.091
23 1 15E 49 CC MO 5745 5825 0.045
23 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E 38 CC MO 5180 5240 0.028
24 2 15E 38 CC MO 5190 5230 0.044
24 3 15E 38 CC MO ND 5260 5320 0.047
24 4 15E 38 CC MO ND 5270 5310 0.092
24 5 15E 38 CC MO ND 5500 5700 0.058
24 6 15E 38 CC MO ND 5510 5670 0.047
24 7 15E 38 CC MO ND 5720 5720 0.044
24 8 15E 38 CC MO ND 5710 5710 0.044
24 9 15E 38 CC MO ND 5530 5690 0.091
24 1 15E 49 CC MO 5745 5825 0.045
24 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E 38 CC MO 5180 5240 0.028
25 2 15E 38 CC MO 5190 5230 0.044
25 3 15E 38 CC MO ND 5260 5320 0.047
25 4 15E 38 CC MO ND 5270 5310 0.092
25 5 15E 38 CC MO ND 5500 5700 0.058
25 6 15E 38 CC MO ND 5510 5670 0.047
25 7 15E 38 CC MO ND 5720 5720 0.044
25 8 15E 38 CC MO ND 5710 5710 0.044
25 9 15E 38 CC MO ND 5530 5690 0.091
25 1 15E 49 CC MO 5745 5825 0.045
25 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E 38 CC MO 5180 5240 0.028
26 2 15E 38 CC MO 5190 5230 0.044
26 3 15E 38 CC MO ND 5260 5320 0.047
26 4 15E 38 CC MO ND 5270 5310 0.092
26 5 15E 38 CC MO ND 5500 5700 0.058
26 6 15E 38 CC MO ND 5510 5670 0.047
26 7 15E 38 CC MO ND 5720 5720 0.044
26 8 15E 38 CC MO ND 5710 5710 0.044
26 9 15E 38 CC MO ND 5530 5690 0.091
26 1 15E 49 CC MO 5745 5825 0.045
26 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15E 38 CC MO 5180 5240 0.028
27 2 15E 38 CC MO ND 5260 5320 0.047
27 3 15E 38 CC MO ND 5500 5700 0.058
27 4 15E 38 CC MO ND 5720 5720 0.044
27 5 15E 38 CC MO ND 5710 5710 0.044
27 6 15E 38 CC MO ND 5530 5690 0.091
27 7 15E 38 CC MO 5190 5230 0.044
27 8 15E 38 CC MO ND 5270 5310 0.092
27 9 15E 38 CC MO ND 5510 5670 0.047
27 1 15E 49 CC MO 5745 5825 0.045
27 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E 38 CC MO 5180 5240 0.028
28 2 15E 38 CC MO 5190 5230 0.044
28 3 15E 38 CC MO ND 5260 5320 0.047
28 4 15E 38 CC MO ND 5270 5310 0.092
28 5 15E 38 CC MO ND 5500 5700 0.058
28 6 15E 38 CC MO ND 5510 5670 0.047
28 7 15E 38 CC MO ND 5720 5720 0.044
28 8 15E 38 CC MO ND 5710 5710 0.044
28 9 15E 38 CC MO ND 5530 5690 0.091
28 1 15E 49 CC MO 5745 5825 0.045
28 11 15E 49 CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E 38 CC MO 5180 5240 0.028
29 2 15E 38 CC MO 5190 5230 0.044
29 3 15E 38 CC MO ND 5260 5320 0.047
29 4 15E 38 CC MO ND 5270 5310 0.092
29 5 15E 38 CC MO ND 5500 5700 0.058
29 6 15E 38 CC MO ND 5510 5670 0.047
29 7 15E 38 CC MO ND 5720 5720 0.044
29 8 15E 38 CC MO ND 5710 5710 0.044
29 9 15E 38 CC MO ND 5530 5690 0.091
29 1 15E 38 CC MO 5745 5825 0.0454
29 11 15E 38 CC MO 5755 5795 0.0386
29 12 15E 38 CC MO 5775 5775 0.0447
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC MO 5180 5240 0.028
31 2 15E CC MO 5190 5230 0.044
31 3 15E CC MO ND 5260 5320 0.047
31 4 15E CC MO ND 5270 5310 0.092
31 5 15E CC MO ND 5500 5700 0.058
31 6 15E CC MO ND 5510 5670 0.047
31 7 15E CC MO ND 5720 5720 0.044
31 8 15E CC MO ND 5710 5710 0.044
31 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.002
32 2 15C CC MO 2412 2462 0.104
32 3 15C CC MO 2422 2452 0.054
32 4 15C CC MO 5745 5825 0.045
32 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.002
34 2 15C CC MO 2412 2462 0.104
34 3 15C CC MO 2422 2452 0.054
34 4 15C CC MO 5745 5825 0.045
34 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15E CC MO 5180 5240 0.028
35 2 15E CC MO 5190 5230 0.044
35 3 15E CC MO ND 5260 5320 0.047
35 4 15E CC MO ND 5270 5310 0.092
35 5 15E CC MO ND 5500 5700 0.058
35 6 15E CC MO ND 5510 5670 0.047
35 7 15E CC MO ND 5720 5720 0.044
35 8 15E CC MO ND 5710 5710 0.044
35 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC MO 5180 5240 0.028
36 2 15E CC MO 5190 5230 0.044
36 3 15E CC MO ND 5260 5320 0.047
36 4 15E CC MO ND 5270 5310 0.092
36 5 15E CC MO ND 5500 5700 0.058
36 6 15E CC MO ND 5510 5670 0.047
36 7 15E CC MO ND 5720 5720 0.044
36 8 15E CC MO ND 5710 5710 0.044
36 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.002
38 2 15C CC MO 2412 2462 0.104
38 3 15C CC MO 2422 2452 0.054
38 4 15C CC MO 5745 5825 0.045
38 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.028
39 2 15E CC MO 5190 5230 0.044
39 3 15E CC MO ND 5260 5320 0.047
39 4 15E CC MO ND 5270 5310 0.092
39 5 15E CC MO ND 5500 5700 0.058
39 6 15E CC MO ND 5510 5670 0.047
39 7 15E CC MO ND 5720 5720 0.044
39 8 15E CC MO ND 5710 5710 0.044
39 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402 2480 0.002
40 2 15C CC MO 2412 2462 0.104
40 3 15C CC MO 2422 2452 0.054
40 4 15C CC MO 5745 5825 0.045
40 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402 2480 0.002
42 2 15C CC MO 2412 2462 0.104
42 3 15C CC MO 2422 2452 0.054
42 4 15C CC MO 5745 5825 0.045
42 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15E CC MO 5180 5240 0.028
44 2 15E CC MO 5190 5230 0.044
44 3 15E CC MO ND 5260 5320 0.047
44 4 15E CC MO ND 5270 5310 0.092
44 5 15E CC MO ND 5500 5700 0.058
44 6 15E CC MO ND 5510 5670 0.047
44 7 15E CC MO ND 5720 5720 0.044
44 8 15E CC MO ND 5710 5710 0.044
44 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E CC MO 5180 5240 0.028
45 2 15E CC MO 5190 5230 0.044
45 3 15E CC MO ND 5260 5320 0.047
45 4 15E CC MO ND 5270 5310 0.092
45 5 15E CC MO ND 5500 5700 0.058
45 6 15E CC MO ND 5510 5670 0.047
45 7 15E CC MO ND 5720 5720 0.044
45 8 15E CC MO ND 5710 5710 0.044
45 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402 2480 0.002
47 2 15C CC MO 2412 2462 0.104
47 3 15C CC MO 2422 2452 0.054
47 4 15C CC MO 5745 5825 0.045
47 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402 2480 0.002
48 2 15C CC MO 2412 2462 0.104
48 3 15C CC MO 2422 2452 0.054
48 4 15C CC MO 5745 5825 0.045
48 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.002
49 2 15C CC MO 2412 2462 0.104
49 3 15C CC MO 2422 2452 0.054
49 4 15C CC MO 5745 5825 0.045
49 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC MO 5180 5240 0.028
50 2 15E CC MO 5190 5230 0.044
50 3 15E CC MO ND 5260 5320 0.047
50 4 15E CC MO ND 5270 5310 0.092
50 5 15E CC MO ND 5500 5700 0.058
50 6 15E CC MO ND 5510 5670 0.047
50 7 15E CC MO ND 5720 5720 0.044
50 8 15E CC MO ND 5710 5710 0.044
50 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E CC MO 5180 5240 0.028
51 2 15E CC MO 5190 5230 0.044
51 3 15E CC MO ND 5260 5320 0.047
51 4 15E CC MO ND 5270 5310 0.092
51 5 15E CC MO ND 5500 5700 0.058
51 6 15E CC MO ND 5510 5670 0.047
51 7 15E CC MO ND 5720 5720 0.044
51 8 15E CC MO ND 5710 5710 0.044
51 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC MO 5180 5240 0.028
55 2 15E CC MO ND 5260 5320 0.047
55 3 15E CC MO ND 5500 5700 0.058
55 4 15E CC MO ND 5720 5720 0.044
55 5 15E CC MO ND 5710 5710 0.044
55 6 15E CC MO ND 5530 5690 0.091
55 7 15E CC MO 5190 5230 0.044
55 8 15E CC MO ND 5270 5310 0.092
55 9 15E CC MO ND 5510 5670 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402 2480 0.002
56 2 15C CC MO 2412 2462 0.104
56 3 15C CC MO 5745 5825 0.045
56 4 15C CC MO 2422 2452 0.054
56 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.002
57 2 15C CC MO 2412 2462 0.104
57 3 15C CC MO 2422 2452 0.054
57 4 15C CC MO 5745 5825 0.045
57 5 15C CC MO 5755 5795 0.089
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15E CC MO 5180 5240 0.028
58 2 15E CC MO 5190 5230 0.044
58 3 15E CC MO ND 5260 5320 0.047
58 4 15E CC MO ND 5270 5310 0.092
58 5 15E CC MO ND 5500 5700 0.058
58 6 15E CC MO ND 5510 5670 0.047
58 7 15E CC MO ND 5720 5720 0.044
58 8 15E CC MO ND 5710 5710 0.044
58 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E CC MO 5180 5240 0.028
62 2 15E CC MO 5190 5230 0.044
62 3 15E CC MO ND 5260 5320 0.047
62 4 15E CC MO ND 5270 5310 0.092
62 5 15E CC MO ND 5500 5700 0.058
62 6 15E CC MO ND 5510 5670 0.047
62 7 15E CC MO ND 5720 5720 0.044
62 8 15E CC MO ND 5710 5710 0.044
62 9 15E CC MO ND 5530 5690 0.091
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402 2480 0.002
63 2 15C CC MO 2412 2462 0.104
63 3 15C CC MO 2422 2452 0.054
63 4 15C CC MO 5745 5825 0.045
63 5 15C CC MO 5755 5795 0.089

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC