CUSTOMER : Standard CUSTOMER : Standard DATE DATE REV
: 2019,06.10 .
: 2023. 04. 01
: 0.4
. PRODUCT SPECIFICATION SPECIFICATIONS FOR APPROVAL SPECIFICATIONS FOR APPROVAL TWZT-S001D-P Model Part Number Customer P/N Pole Zigbee Module TWZT-S001D-P
APPROVAL REMARK APPENDIX DESIGNED CHECKED APPROVED 2023.01.26 J.B.KIM 2023.01.26 J.S.YEON 2023.01.26 I.U.KIM SPECIFICATION MODEL REG. DATE REV. DATE TWZT-S001D-P 2023.04.01
REV. No. PAGE
Rev. 0.1 31
Revision History Revision Date Contents of Revision Change 0.0 2023.04.01 Initial Release Remark J.B. Kim 1 / 12 TABLE OF CONTENTS 1. Application 2. Quality 3. Appearance and Characteristics 4. Overall Service Scenario 5. General Features 6. Absolute Maximum Rating 7. Electrical Specification 8. Mechanical Information 9. User Quick Manual 11. Disclaimers 3/15 3/15 3/15 4/15 5/15 7/15 8/15 12/15 14/15 15/15 2 / 12 1. Application This Specification is applied to ATEC IoT Pole Zigbee Module(TWZT-S001D-P). TWZT-S001D-P is Common Zigbee Module solution for IEEE 802.15.4(6LoWPAN) applications. The robust network with PA(Power Amplifier) and diverse interface(SPI, UART, I2C) make it possible to be used as various kinds of applications. Specially, it is suitable for Gen2 Gateway and RTLS Anchor. TWZT-S001D-P is composed of RF IC and necessary external component include the Dipole Ant. 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agree with both companies. 3. Appearance and Characteristics 3.1. Appearance Appearance should not be contaminated by harmful materials and should not have cracks, etc. Mechanical dimensions should meet the contents of clause 8. 3.2. Characteristic Electrical Characteristics should meet the contents of clause 7. 3 / 12 4. Overall Service Scenario POS Server ESL EMS(1) Wired WiFi / Ethernet IEEE802.15.4 2,000 Tags per GW One Platform &
Integrated Gateway GATEWAY Wireless & Bi-Directional 2.4GHz Wireless Tags
(Battery / Power Line)
(1) EMS : ESL Management Software 4 / 12 5. General Features 5.1. Description Item Size Weight Memory Description 42.3 x 28.0 x 9.8 (mm) Typ. 6g Internal Flash : 512KB SRAM : 32KB Power Operating Voltage : Typ. 3.3V (2.3V~3.6V) Tx Power Max.10dBm RF Data Rate 250kbps Antenna Dipole Antenna 20pin Interface UART for FW Downloading SPI for Communication Network Wireless Security Protocol 2.4GHz IEEE802.15.4 compliant RF Transceiver Range Extender (PA/LNA) Robust wireless network (ATEC IoT own protocol) Compatible with ATEC IoT protocol communication devices Comm. Range Max. 30m (under LoS) (1)
(1) LoS (Line of Sight) : Without any sort of an obstacle between a gateway and end devices 5 / 12 6. Absolute Maximum Rating 6.1. Environmental Conditions The normal operating environmental conditions are those as below. In such conditions, ESL must be in conformity with the present specification. The conformity to such requirement must be certified by the manufacturer. Parameter Operating Environment Storage Environment
[Notice]
Condition Temperature Humidity Temperature Humidity Min.
-20
-30
Typ. Max.
35
35 85 80 85 80 Unit
%RH
%RH
* TWZT-S001D-P is design to be used indoor/Ceiling. It does not guarantee outdoor conditions. 6.2. Electrical Conditions The operating electrical conditions are those as below. In such conditions the ESL must be in conformity with the present specification. All devices can be damaged or non-operated over the specification as below. The conformity to such requirement must be certified by the manufacturer. Parameter Condition Supply Voltage DC Power Supply Power Consumption ESD Protection
[Notice]
@ 3.0~3.3V (Active Tx)
@ 3.0~3.3V(Active Rx) HBM(150pF/330) (1) Air Condition @Soft Fail Min 2.3
-8 Typ. 3.3
Max 3.6 200 15
+8 Unit V mA mA kV
(1) TWZT-S001D-P is ESD sensitive device. Precaution should be used when handling the device in order to prevent permanent damage. 7 / 12 7. Electrical Specification 7.1. IEEE802.15.4 The TWZT-S001D-P supports IEEE802.15.4. 7.2. General Specification Standard : Only IEEE802.15.4 PHY Frequency : 2405 ~ 2480MHz Channel : 16CH. (5MHz Spacing) Modulation : DSSS/O-QPSK Max. Data Rate : 250Kbps 7.3. Electrical Specification Channel power depend on each country regulations (EX. KC, etc) The electrical specification which is shown below is ATEC IoT internal specification. All values depend on surrounding environment and current statement of access point Condition Min Typ Max
-85
-75
10
-20 75 35 Unit dBm dBm dBm kHz
RF Performance Parameter Output Power Receiver Sensitivity PER=1% (Required -85dBm) Maximum Input Level PER=1% (Required -20dBm) Frequency Tolerance Required Max. 75kHz Error Vector Magnitude Required Max. 35%
8 / 12 7.4. Antenna Performance 7.4.1 Antenna The TWZT-S001D-P supports IEEE802.15.4. Radiation Pattern and Gain TEST METHOD Network Analyzer Signal Interface : Coaxial Cable Test Antenna Dual Polarized Antenna Shield Room Radiation Pattern 2405 MHz 2440 MHz 2480 MHz Efficiency
[Notice]
Frequency(MHz) Efficiency(dB) Peak Gain(dB) 2405
-3.92
-0.36 2440
-3.55 0.41 2480
-4.27
-0.35
* This data is measured when TWZT-S001D-P is connected to the 4th Slot of Gen2 Gateway Board. Gen2 Gateway has 7 slots for diverse modules. The 4th Slot is the middle slot of whole 7 slots of it. 9 / 12 7.4. Antenna Performance 7.4.2 Gen2 Gateway Slot Information Slot#3 Slot#4 Slot#5 IR-UWB Module This Location is recommended ATEC IoT Slot#2 Slot#1 SSD Memory
(Back Case) USB DC Input Button Input LAN 10 / 12 Slot#6 Slot#7 LED Indicator Expandable Slot
(SPI I/F) Expandable Slot
(UART&I2C I/F) 7.5. Interface Information Top side Bottom side No.20 No.10 No.11 I/O No.1 Description G O I O I O P P G G G
O G I I G I O G Common ground Enable input for SPI interface SPI data input wake up signal NC NC 3.3V external DC supply 3.3V external DC supply Common ground Common ground Common ground NC Firmware Download Enable Pin Common ground Reset input/output(active low) Interrupt output to the host processor Common ground SPI interface clock SPI data input Common ground Name GND SPI_CS SPI_MISO WAKE UP UART_TX UART_RX VDD VDD GND GND GND NC TEST_PIN GND RESET IRQ GND SPI_CLK SPI_MOSI GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 11 / 12 8. Mechanical Information 8.1. Mechanical Dimension Size Weight 42.3 x 28.0 x 9.8 mm Typ. 6g 12 / 12 8.2. Assembly Product Label Top Case PCB Bottom Case 13 / 12 9. User Quick Manual 9.1. Pole Zigbee Module User Manual 9. 2. LED Alarming ATEC IoT Pole Zigbee Module is suitable for Gen2 Gateway. 3 Slots of Gen2 Gateway can be used for Zigbee. To fulfill the ESL System, at least 3 Pole Zigbee Modules should be inserted to the Gateway. Likewise this picture, when you inserting modules, be careful with the directions. Modules will not be able to be putted in when the inserting direction is opposite. When Modules are working abnormally, three LEDs(Power, Status, Ethernet) would blink to alarm the unusual state. The abnormal phenomenon could happen when you forced pull out the modules or module malfunctions. 14 / 12 10. Disclaimers
-. ATEC IoT is not responsible for any damages caused by any accidents or operational environments exceeding the absolute maximum ratings.
-. Consultation with ATEC IoT is recommended for unassured environments or operations to avoid any possible malfunctions or damages of the products or risk of life or health.
-. Any unauthorized, without prior written consents from ATEC IoT, disassembly is prohibited if purposed for reverse-engineering. All defected devices must be reported to ATEC IoT and not to be disassembled or analyzed.
-. The product information can be modified and upgraded without prior notice. a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b. Rule Part 15.21: The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help 15 / 12