FCC ID: 2ANR7-TPMS5 Tire-pressure monitoring system

 

Tire Pressure Sensor System Tool Kit TPMS5 TPMS diagnostic tool to diagnose sensors and relearn TPM systems on Domestic, Asian and European vehicles. Simple icon-based navigation easily navigates from one function to the next. Includes OBD-II connectivity to write sensor IDs to ECU as required. Features vehicle-specific prompts that guide TPM system relearns and software to program aftermarket TPM sensors. 1 Contents Safety Information..............................................................................................................3 Chapter 1: Introduction......................................................................................................6 Chapter 2: Tool Operation and Navigation ......................................................................7 A) Main Menu.....................................................................................................................................8 B) TPMS.............................................................................................................................................9 1. Trigger Sensor.....................................................................................................................9 2. Rotate.................................................................................................................................10 3. Relearn...............................................................................................................................11 4. Replace..............................................................................................................................12 5. Service Kit..........................................................................................................................19 6. Email..................................................................................................................................20 C) Special Functions.........................................................................................................................21 1. Keyfob................................................................................................................................22 2. Placard Adjustment............................................................................................................23 3. Verify IDs/DTC Codes........................................................................................................25 D) Settings........................................................................................................................................27 E) History..........................................................................................................................................29 F) Training........................................................................................................................................31 1. Troubleshooter...................................................................................................................31 2. Demo.................................................................................................................................32 Chapter 3: Updating..........................................................................................................33 Chapter 4: Warranty/Service and Repair.........................................................................35 2 Safety Signal Words SAVE THESE INSTRUCTIONS All safety messages contain a safety signal word that indicates the level of the hazard. An icon, when present, gives a graphical description of the hazard. Safety Signal words are:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor injury to the operator or to bystanders. Safety Message Conventions Safety messages are provided to help prevent personal injury and equipment damage. Safety messages communicate the hazard, hazard avoidance and possible consequences using three different type styles:

An icon, when present, gives a graphical description of the potential hazard. Normal type states the hazard. Bold type states how to avoid the hazard. Italic type states the possible consequences of not avoiding the hazard. DANGER WARNING CAUTION Safety Message Example WARNING Risk of unexpected vehicle movement. Block drive wheels before perofrming a test engine running. Moving vehicles can cause injury. 3 Safety Precautions WARNING Use of diagnostic equipment can cause electrical shock, fire and explosion. Use caution and proper procedures when connecting and disconnecting leads. Diagnostic equipment must be located 18 or more above floor level. Avoid sparks and other sources of ignition. Electrical shock, flames and explosion can cause serious injury. Improper use can cause hazardous conditions. Unexpected electrical, thermal or mechanical occurrences can cause injury. Read and follow all safety precautions accompanying the product. Wear safety goggles. Electromagnetic and electronically generated waves may interfere with pacemakers. Individuals with pacemakers should never use this product. Using this product with a pacemaker can result in serious injury or death. Internal battery presents a risk of fire, explosion and electric shock. Charge battery pack only with charger provided. Do not operate at temperatures above 120F (50C). Do not store at temperatures above 140F (60C). Do not discard used batteries; return them to a Snap-on repair center for recycling. Follow all safety messages in user manual. Fire or explosion or electric shock can cause injury. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCCID: 2ANR7-TPMS5 4 TPMS5 QTY:1 For Emergencies only. Call CHEMTREC 1-800-424-9300 US and Canada

+1-703-741-5970 International 3.8 V 4.8 A 18.24 Wh Input Rating: DC5V, 1A Operating temperature range: -10C ~ 50C Storage Temperature range: -20C ~ 60C Operating Humidity: 20 ~ 85 % RH. NON-CONDENSING Storage Humidity: 5 ~ 95 % RH. NON-CONDENSING IP54: Dust-Protected and protected against splashing water. Do not position the equipment so that it is difficult to operate the disconnecting device. Cleaning Clean with a soft dry cloth, or if necessary, a soft damp cloth with clean water. Do not use any harsh chemical solvents such as acetone, thinner, brake cleaner, alcohol, etc as this may damage the plastic surface. The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2ANR7-TPMS5 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5 Chapter 1: Introduction TPMS diagnostic tool that tests pressure monitoring sensors, captures sensor data, and relearns tire pressure monitoring systems. Also programs aftermarket sensors and various other TPMS functions. Antenna Touch Screen Display Front Back Battery Compartment Directional Buttons No/Cancel Yes/Enter Kit Contents TPMS5 TPMS5-1 TPMS5-4 TPMS5-7 TPMS5-8 TPMS5-9 TPMS5-10 SS203545 TPMS5 Tool Kit OBDII Cable USB Type C Cable AC/DC Power Adapter Lithium Battery Soft Carry Case USB Drive with Manual Quick Start Guide TPMS5 TPMS5 Quickstart Guide OBDII Port USB-C Port Power Trigger Top 6 Chapter 2: Tool Operation and Navigation When testing sensors, position the TPMS5 antenna on the sidewall of the tire near the valve. Press the Trigger button to trigger the sensor. For certain applications, the OBDII Cable is needed to perform vehicle relearns, placard adjustments, and more. For these applications, Plug the OBDII cable into the tool, and the other end into the vehicle. The TPMS5 will display OBDII vehicle port locations for easy identification. 7 A - Main Menu The Main Menu is a hub to the various features and functions available on the TPMS5. From this screen you will find the main TPMS Function, Special Functions, Update/Registration, Settings, History, and Training. TPMS Update Special Functions Settings Training History 8 B - TPMS Sensor ID Sensor ID is unique to each TPMS sensor and can be displayed in either Hexadecimal or decimal format by tapping the drop down arrow. The main function of the TPMS5 is to trigger sensors, perform TPMS relearns, replace sensors, and more. This section will cover all the functionalities of TPMS. 1. Trigger Sensor Trigger Sensor is selected by default upon entering the TPMS function. From here, using the Trigger button on top of the tool or by tapping the trigger icon on the display (located on the vehicle icon), the tool will trigger TPMS sensors and display all TPMS info. Notes Custom notes can be entered by tapping the pencil icon Pressure Tire pressure is displayed in PSI, Bar, or kPa, by tapping the drop down arrow. Temperature Tire temperature is displayed in either Farenheit or Celcius by tapping the drop down arrow. Frequency Sensor frequency is displayed. Many Domestic vehicles use 315 MHz, and many Asian and European use 433 MHz. 9 Battery Sensor battery status is displayed. If a sensors battery is sufficient OK will be displayed. If a sensor battery is low, NOK will be displayed G Some sensors contain an accelerometer. the G column will display this data if applicable 2. Rotate The Rotate function is used whenever performing a tire rotation and a TPMS relearn is required. The tool will display specific instructions if a vehicle requires special pressure/tire adjustments before performing a relearn. 10 3. Relearn When replacing a sensor, or altering sensor locations, a TPMS relearn is required. The Relearn function displays all necessary steps to put a vehicle into a learn mode, to relearn the sensors to the ECU. If applicable, an OBDII relearn can be performed with the OBDII Cable included with the tool. The TPMS5 will display OBDII port locations and instructions. Manual Relearn Example OBDII Relearn Example 11 4. Replace If a sensor needs replacing, this function can be used to program aftermarket TPMS sensors, view OEM sensor part numbers, as well as images of all sensors. Sensor Programming functions are explained in the next section. Aftermarket Example OEM Example 12 4.1 Create The Create function allows the user to program a brand new sensor ID to an aftermarket TPMS sensor. 1 3 2 4 13 Select the sensor brand you are working with, then select Create. Place the sensor above the tools antenna, and tap program, or use the Trigger button on top of the tool. The tool will begin programming the sensor. This process may take Once successfully programmed, the tool will display the sensors a few moments. ID, pressure, and temperature.

 

 

4.2 Copy The Copy function allows the user to copy the sensor ID from an existing sensor, and program them to an aftermarket sensor. 1 4 2 5 3 6 Select the sensor brand you are working with, then select Copy. Place the tools antenna next to the sensor you wish to copy, and tap copy, or use the Trigger button on top of the tool. The tool will begin copying the existing ID. The existing sensors information will be displayed. Place the new sensor above the tools antenna, and tap program, or use the Trigger button on top of the tool. The tool will begin programming the sensor. This process may take a few moments. Once successfully programmed, the tool will display the sensors ID, pressure, and temperature. 14 4.3 Copy Set The Copy Set function allows the user to copy the sensor ID from an existing sensor, and program them to an aftermarket sensor. 1 4 2 5 3 6 Select the sensor brand you are working with, Select Copy then select Set. The tool will display a table to copy multiple sensors. Place the tools antenna next to the sensor you wish to copy, and tap copy. The existing sensors ID will be displayed. Place the new sensor above the tools antenna, and tap program. The tool will begin programming the sensor. This process may take a few moments. Once successfully programmed, the tool will display the sensors ID, pressure, and temperature. Note: Sensors can be copied and programmed in any order. It is not necessary to Copy, then Program each sensor in succession. 15 4.4 Retrieve ID The Retrieve ID function allows the user to pull the sensor IDs from the vehicles ECU via the OBDII cable, and program them to an aftermarket sensor. 1 4 2 5 3 6 Select the sensor brand you are working with, then select Retrieve ID. Ensure the OBDII Cable is connected to the tool and vehicle with the ignition in the ON position, Then tap Retrieve IDs The tool will begin retrieving the IDs from the vehicle. Once retrieved, the tool will display a table with all of the existing IDs stored in the vehicle. Place the new sensor above the tools antenna, and tap program. The tool will begin programming the sensor. Once successfully programmed, the tool will This process may take a few moments. display Successfully Programmed. Note: Sensors can be programmed in any order. It is not necessary to program each sensor in succession. 16 4.5 Manual ID The Manual ID function allows the user to program a custom ID to an aftermarket sensor in either Decimal (0-9) or Hexadecimal

(A-F 0-9) format. 1 4 2 5 3 6 Select the sensor brand you are working with, Select whether to enter a Decimal (0-9) or Select the text box to bring up a keyboard to then select Manual ID. Hexadecimal (A-F 0-9). manually enter the Sensor ID. Once entered, place the new sensor above The tool will begin programming the sensor. the tools antenna, and tap program. This process may take a few moments. Once successfully programmed, the tool will display the ID enetered, pressure, and temperature. 17 4.6 History The History function allows the user to program aftermarket sensors based on previous job information. (For example, if a job was performed and saved on a 2020 Ford Focus, that job can be returned to, and that sensor information can be used for programming.) 1 3 2 4 Select the sensor brand you are working with, then select History. All previous jobs will appear, select the job you wish to retrieve information from. The tool will display the sensor information from the selected job. From this screen, select Replace. From the Replace screen, select the preferred programming method. 18 5. Service Kit When replacing a sensor, it is often neccesary to replace the sensors valve stem. The Service Kit function displays the applicable service kit used for replacing sensors for the selected vehicle. The part number, torque specs, and image are all displayed. 19 6. Email After peforming any of the main TPMS functions, the sensor information can be saved and emailed. Custom information that can be entered includes, Name, Address, VIN, Odometer, Plate #, and Notes. Grant's Auto Repair 123 Example Street, Detroit 313-555-1234 JobNumber: xxxxxxx Time: 9:54:17 Date: 9/6/2020 Device Serial Number: 11111111111 Customer Name:

JIM BARNES Vehicle Identification:

Make GMC Model Year Odometer reading Terrain 2015 12000 Wheel TPMS ID Pressure Temperature Battery Frequency G Notes Tire 1 78162278 35.4 PSI 82 F OK 315 MHz 7.8 LF Sensor needs repair wheel inspected:ok Tire 2 78162278 35.4 PSI Tire 3 78162278 35.4 PSI Tire 4 78162278 35.4 PSI Tire 5

82 F 82 F 82 F

OK OK OK

315 MHz 7.8 315 MHz 7.8 315 MHz 7.8

Email Example 20 C- Special Functions Within the Special Functions option from the main menu you will find Keyfob, Placard Adjustment, and Verify IDs. This section will cover each function in depth. 21 1. Keyfob The TPMS5 includes the ability to test vehicle keyfobs. Many vehicle relearns require the use of a keyfob, so testing its functionality is crucial. Within Keyfob, press either the lock or unlock button on the fob to display a bar graph. The tool will display signal strength so the user can determine if the fob is functioning properly. 22 2. Placard Adjustment When changing tire sizes/types, it is sometimes necessary to change the internal pressure threshold values stored in the vehicle. For example, on the inside of the door jam, there is a pressure placard that shows the reccomended inflation pressures for the stock tires. When changing tires, you may need to raise or lower this value depending on the size/type of tire. By changing this value in the vehicles ECU, it will prevent the TPMS light from coming on at an incorrect pressure value for the tire. 23 1 3 2 4 24 After selecting Placard Adjustment, Ensure the OBDII Cable is connected to the tool and vehicle with the ignition in the ON position, Then tap OK. The current values stored within the vehicle will be displayed. Tap the drop down arrow under Type to change tire type. Tap the drop down arrow under PSI to change the PSI value. Once, both options have been changed, tap Write Values to ECU. The new values will be stored in the vehicle 3. Verify IDs/DTC Codes The Verify IDs/DTC Codes function gives the user the ability to diagnose any issues with the vehicles TPMS via a step-by-step system. First, trigger each sensor with the TPMS5 to retrieve each ID. Second, plug in the OBDII cable to retrieve the stored IDs and to scan for any DTCs that may be present. Lastly, verify the retrieved IDs are the same ones stored in the vehicle. If not, the next step is to either replace a sensor, or perform a relearn to make sure the IDs match. 25

 

 

1 4 2 5 3 6 After selecting Verify IDs/DTC Codes, trigger each sensor of the vehicle. In this example the RR sensor is not triggering. Continuing on to DTC Codes, ensure the OBDII Cable is connected to the tool and vehicle with the ignition in the ON position, Then tap OK. In this example, it shows that two codes are present. The first code may be the issue regarding the sensor. Continuing on to Verify IDs, this example shows that there is an ID stored in the vehicle but triggering the sensor shows no sensor detected. The sensor needs to be replaced. Continuing on to Repair, selecting either Replace or Relearn will take you to that screen at the main TPMS function where you can program a sensor, or perform a relearn In this example, programming a new sensor is needed. From the program screen, a new sensor can be programmed, and a relearn can be performed if necessary. See section B-4 for programming, and B-2 for relearns. Note: If all sensors appear on the Verify IDs screen but the IDs do not match, a relearn is necessary to match the IDs. 26 D - Settings Within the Settings function, a variety of customizable settings can be changed for user preference. Each setting is described in the next section. 27 Profile Change internal tool information including Company Name, Address, and Phone Number. Date and Time Change Date and Time settings including Date, Time, Time Zone, set automatic Date and Time On/Off. Change between 10+ Languages including English, Spanish, French, and more. Language Region Units Change Region from North America, Europe, Australia, or Japan. Change Pressure (PSI, Bar, kPa) and Temperature (F, C) units. Sensor ID Format Change Sensor ID Formats from Decimal (0-9), Hexadecimal (A-F 0-9), or Auto. Screen Brightness Change Screen Brightness from 20%-100%. Sound Auto OFF WiFi Setup Factory Reset About Change Sound settings including Beep (On/Off), and Vibration (On/Off). Change Auto OFF settings from 10min-60min or Off completely. Change Wifi Settings by scanning for available networks and connecting. (This setting is necessary for WiFi Updating and Emailing). Erase all data from the tool and return it to factory settings. WARNING: This will remove all jobs, settings, and update information from the tool View various tool information including Serial Number, Version, Copyright information, and more. 28 E - History Within the History function, view all saved jobs in the tool and revisit them. Jobs will be listed in order by date and will display customer name and vehicle Make, Model, and Year. 29 F - Training Within the Training function, view a TPMS troubleshooter that takes the user through common TPMS issues to reach a solution. As well as an in-depth Demo mode that takes the user step-by-step through the main TPMS function. 30 1. Troubleshooter Troubleshooter allows the user to diagnose common TPMS issues. The function will ask common questions to guide the user to a solution. Tap each answer as it applies, and the tool will take the user to the screen neccessary. 31 2. Demo Demo mode takes the user step-by-step through the main TPMS function. From the main menu, all the way down to sending an email, the user can Demo the tool. Use this mode for practice or training purposes. Note: this mode is for Demo purposes only, any information that appears on-screen are examples and information may not match certain situations. 32 Chapter 3: Updating A. via WiFi Connection The TPMS5 can be updated directly through WiFi. Ensure the tool is plugged in and charging whenever performing an update. 1 4 2 5 3 6 First, WiFi must be set up on the tool. select Scroll down to WiFi Setup and select it. Settings. The WiFi setup screen will appear, as well as all available networks. Select the network you are using. You will be prompted to enter the password for you network. When finished, select Done. Once complete, the tool will display that you are connected to the network. Press cancel on the tool to return to the TPMS5 application. From the Main Menu, select Update. 33 8 9 If this is your first time visiting this screen, you will be prompted to register your tool. Enter all information, then select Save. Once finished, select Update. This screen will display if there is an update available, as well as other software information. Select Update. 7 10 The Tool will begin updating, DO NOT interrupt this process. Once finished, the tool will restart and it will be on the latest software version. 34 Chapter 4: Warranty/Service and Repair Snap-on Tools Company Limited One (1) Year Warranty Snap-on Tools Company (the Seller) warrants only to original purchasers who use the Equipment in their business that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one year from the date of original invoice. Seller does not provide any warranty for accessories used with the Equipment that are not manufactured by Seller. SELLERS OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLERS OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLERS SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY, IN SELLERS JUDGMENT, TO RETURN THIS EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES, EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SELLER SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL COSTS OR DAMAGES INCURRED BY PURCHASERS OR OTHERS (including, without limitations, lost profits, revenues, and anticipated sales, business opportunities or goodwill, or interruption of business and any other injury or damage). This Warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration, modification or adjustment of the Equipment by other than Sellers authorized representatives; (C) installation, repair or maintenance (other than specified operator maintenance) of the Equipment or related equipment, attachments, peripherals or optional features by other than Sellers authorized representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, dust or other air contaminants, radio frequency interference, electric power failure, power line voltages beyond those specified for the Equipment, unusual physical, electrical or electromagnetic stress and/or any other condition outside of Sellers environmental specifications; (G) use of the Equipment in combination or connection with other equipment, attachments, supplies or consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation, requirement or specification governing emission analyzers and related supplies or consumables. Repairs or replacements qualifying under this Warranty will be performed on regular business days during Sellers normal working hours within a reasonable time following purchasers request. All requests for Warranty service must be made during the stated Warranty period. Proof of purchase date is required to make a Warranty request. This Warranty is nontransferable. 35 TPMS5 Technical Support and Service US SERVICE AND TECH SUPPORT 35990 Industrial Road, Livonia, Michigan 48150 844-349-8767 CANADA SERVICE AND TECH SUPPORT 4-2355 Royal Windsor Drive, Mississauga, Ontario L5J 4S8 855-455-8767 Email: support@tpmsconnect.com Assembled in Taiwan Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. 2020 Snap-on Incorporated. All Rights Reserved. All other marks are trademarks of their respective holders. Snap-on, 2801 80th Street, Kenosha, WI 53143 www.snapon.com Patents: See https://patents.snapon.com 36 EU Declaration of Conformity Product Model/Product Product Name: Tire-pressure monitoring system Model Name: TPMS5 Name and address of the manufacturer or his authorised representative:

ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) NO.3, LANE 223, SAN JIA DONG STREET, 40642, TAICHUNG, TAIWAN This declaration of conformity is issued under the sole responsibility of the manufacturer. Objection of the declaration Tire-pressure monitoring system The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Radio Equipment (RED) Directive 2014/53/EU 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:

RED: EN 300 328 V2.2.2, EN 301 893 V2.1.1, EN 300 330 V2.1.1, EN300 220-1 V3.1.1, EN300 220-2 V3.2.1 7. Additional information:

Signed for and on behalf of:

ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) Taichung, Taiwan 2020/8/19 Roger Lin / RD Manager 37

 

 

 

 

 

 

 

 

 

 

Saat eee Fee S(O an cod I eee | LO e-OmNSa LS ENE CER nT tae ety eatery Pree alee Rem) ee > echo Pe UcMol =o 0) (ex-Alol Ue) (ces (U (ers) Aor) @exs Ue a CMTUNALOY UTC MU NAOT CoM B-JUC] el U MC) ox] e101) Key coy Cer Te a eo) OY Te rte ee bLoaiqeq Do vos 2f0Le gf fewWbeLssnie2 SPOAG 150. E (ta.C) DO Vos qlecsiq neeq pysfeLiee EIL6 OL 6xbjo2iou OL E[SCfLic 2eyocK csU Cgr26e IUINLA CUSLAs pssfeLA bscK OUJA MIsU CUSLOGL ETON cIUULS J Wess TaK-IUM oN cr-l-lUl cM MUL) ey KM) (0)foX-J Le lO] ee Kj [rel tu (em-] 8 ole) @

COC ALUo WAU) M o)Coreya eran N\TSURSMonsrerc]0 N=) Colmes) UMUC ANI MLUE-T= COAT MIO) (NLU MOOI SN

[yqiaiqngj2 Mify bscewsKeLe eyon|q VEAL Nee syle bLognics Ey =i[crer Ko UUI=Lel [TAL om= Ley (cros Ko) e] (exc 1 Melle Le WUTC MUU) WUT KIU LICHT UN exc LeX-IU LS]

Nvexbecied SISC{LICS! {WELWS] OL WECYSUICS| OCCMLLEUCEe CSU CSNes IWIN BK639q SUq LO]|OM JI] 2946fA biecynsiove sccowbsuUAIUG US bLognics MEI! esLesA AoAdjce"

+|WWDLObEL nee CSU Cgnes PSSSLgone CoUMI{IOve Pacer tues] eacolel aa USIUN CAIN e > de) (ele) Reser RL MelAC AIO INOY ELT Kerr eee o UTCle EL Mosier UUM lm Cm ole ME MOM eM Lele Me OC RCN Cee mele Part-meyme] lol ertem rela UU mele lict ay reltlexc] e-sole mC B- ee <0) (orto) VMVBIING

 

 

| S'ITTONTSNA ATIT) Wr -er bre rt TA oo ee cee so ek Ost COZ Ne TR Oh oT l= NY BUEN UB ae NY ZO es Ht Nass fo TS Se OO fy S702 yo ea ese ihe NTOTTATINVT ONG

SPECIFICATION FOR APPROVAL al RoHS Compliant Te {Ho AF FR

(DESCRIPTION) +s SHU KE COIL 2. BR SE =: ~-T6440017 _ |\(CUSTOMER PT/NO.) =: _1-19-20007-00001H CC-R0N10SH3-1621-20007 UVF F1l/NO.) oe |6hCluc ee i *

Ig Be 4,65 #4=206-5 i. : MEF-20007 Ve ae QTIRAATT NIC) \*

AMS BAN ES Ss IN ATER ANNO}

JT mre

= eS OS OO f A TIYTIYTISAL TITS rtryrrt N fal f INMS V Dol?

Di

) FA ee 17 |

MODIFICATION AACNVTIVICTS A TICVATC a N\A awe BLD SVANS EASE ANS ALANA IWOVISION UF Vidi A AHA: 20200 F 04 HR 2 4G |

DATE YEAR MONTH DAY

|i) tt 8 + Fe RPA FZ Phar Master Force Components Co... Ltd. ll - es

| a ee ce ee ts eg th mb ae a8 Vo BAe Thr AS Seth OCC OC TOW, OC TRT - QRQ6_.2_AQ5A41Q1 LAY - QQK 2 AQEAINYO

| | Pe pel +3 ltd eS A4isi 6g VU SY OUTOUS TIS LS

= Bemail mfcam@mc&6 hinet net QS ees FO OE VM WSS Vw et OS SS44Y OLAS

> Be Re Ge 2b Gg ME oe ch ay Se 33H AA OT Ee el SPECIFICATION FOR APPROVAL doe 3. 08. ~<ciee I 2.8. onde OOPS kl =F) afer Cee 764 lCUe tls ANT DUDS Fed ATE 2 Sy A) SES TT ZN Ft} S 16440017 CUSTOMER NAME : #8552734 GARZA] CUSTOMER PT/NO.: 1-19-20007-00001H SOAR EERE EERE TEER EERE EEE E HESS EEE ESSERE REESE EES EERE EEE EES DLUICTSVAT. maAaTT. Ann 40 4annh es aa AN VAINLY. Mri. FAL IN.LO.L0UL eee

(1) CONFIGURATION & DIMENSIONS TIAITT emnlem

| 40.0 MAX. |

70.0+5.0 | al J.__ 70.0250 oe A Ne TITRE IN TAPE

\_UL TUBE

(2) SCHEMATIC 4 @ sem e28 eee, ean, Diack VU WUNE)

{a 100 SF

2-UEW 00.3 m/m LG) S7 TS REF) _Y | |

Red(PVC WIRE) Ia) ELECTRICAL CHARACTERISTICS

| NO. PARAMETER TERMINAL SPECIFICATION TEST INSTRIIMENTS INDUCTANCE 162 + 2 uH 20 em e222 on CHEN HWA LCR METER 102

(10U ~ 10% Url) DC RESISTANCE 610 mQ MAX.

@ [Knz, 1.0 Vims. or EQU. CHEN HWA 502AC METER or EQU.

3. HI-POT

| COIL - Come AC S00V, 3 mA, Imin. [CHEN HWA CWI-903 or EQU. |

nr AC AIVIV 2QmA 9 Can MR RN MM Fg wt BREE hg ee Pe 4. |INSULATION RESISTANCE COIL - CORE DC 500V, CHEN HWA CWI-903 or EQU. 100 M OHM MIN. 5. [RATED CURRENT:

fYNMA FA ATOATT . A Tw, Cae suum Cae ar i. ee K)

| CHECKED ig GE I _ * PAGE: 1/4 SrA SME OME EIVEILO OUeg ATA ONNHInTSIAMNTSNAT TOCSATD A TYTMSATITAT VILVLIVAALIVIN DUN ArFRNUVAL (pe) ir SS ee eh SE (A) ZN Be] AA] T6440017 ee nace en NEU AECON TORO SEC CUNO Tere eesNCOUeINOOCCSNOOTESESOODSONOON, = nano R NERO NSRRODSOOObSRDbassoegonoN>eSeEseRSsscoeeneS TICCO'DIDTTIONTI . DnAVvaeIc (/OImAyr on4r 7 orT Arr TraAT AIM RACANTTA 417A4 AAPA enonecaoooavoovesosoesessooesooocesoonosoooogsboosonooooosbeneseSeeceseses: == = = = =~ eapenessccssesescsoccnnceccaesenceoceaoneoncecescecoesooescces FORTE EERE EERE E TESTE HEHE HESS EEE E HERE EREE EE

(4) WINDING CONSTRIICTION _ a owe ecoowe vv UNIT : m/m en eS eee Z~ KRAPLON LAFE ie AAADSTAT TADL AVASAANNIJ ALY ASAE Le 1.5Ts Z-UEW 90.35 m/m 57 Ts (REF) _/7 PVC TUBE COMMENT : APPROVED RY : CUBRCYKEN RV - PREPARED RV -

7

8 SSSSSSPARESS'S DW OCCCPRREERRR LLL PAGE: 2/4 THe 7H 2 J HAH PR BY FB Master Force Components Co., Ltd. ONNMHTIMnTSIATCVAT TAT A TYPYSCAITAT VIDUAL LUIN PUN FATT ING VS (6) Mr TUDE es RE HE (A) ZS] BEB SB] T6440017 CUSTOMER NAME : 3828 -7P 34 ARAB] CUSTOMER PT/NO. :_ 1-19-20007-00001H TYCVODIDTIOWI - DifWw2tsS /MLIC\WE CYYTIT CY AAC DT/ATS) . CY" DNINCLIQ 1491 XvYVV7 aa ANAS 2 ANY BN SVMA AS Ss I NAAN AD obsess: SA Ad | AVAL 2 SANNA: @ Ne ANVIL Ee PART MATERIAL IDENTIFICATION NOJITEM [MATERIAL | CLASS UL FILE NO. MANUFACTURER ram mmrmn mrenr 1 (LURE |POERRIIE K5B KING CORE ELECTRONICS INC. 2. TAPE _|CAT. NO. 35660Y 130C_}E50292(S) |SYMBIO INC. CAT ACY WAIN wher

| | Nos bie ANNs A 1 LOY VV \

3M NO. 1350-1 or 56 130C JE17385(N) |MINNESOTA MINING & MFG CO ELECTRICAL or 1298 ee DIV. NO. 92 120C CAT. NO. CT, PZ 1301 e JINGJIANG YAHUA PRESSURE SENSITIVE a LAL NU. WE LVL GLUE CU., LID. CAT. NO. PF 180C

| | CAT. NO. 370S, 371F | 130C |E175868(S) |BONDTEC PACIFIC CO., LTD. COAT ATISCY\ WI AS 192n%

a oe ee 4JV WY CAT. NO. 911 200C

| a |WIRE POLYURETHANE |

ENAMEI] ED COPPER

| 130C_|E84081(S PACIFIC ELECTRIC WIRE & CABLE CO., LTD. a4ahmnGom waa Amma ILIV [E1L/4557 JUNG SHING WIRE CO., LID, 130C JE152187 TA WIN INDUSTRIES(M) SDN BHD 4. TUBE |HEAT SHRINKABLE LYY/LIvvyy VU 1\ weer ImsAoTLVCO,Y CTIA ATTSNVAASY TOY TCYTH TS TAITAT TOVTH IEC TY Tes SOV YY Vd RSFR-x 42) [LYTTON UL 125C |E20395 J VUNHIUNIU LLL 1 NIU INI LIL, SHENZHEN WOER HEAT-SHRINKABLE

| | MATERIAL CO., LTD. (or EQU.

| HEAT SHRINKARI E DONCCTIAN CITY HITAWET PT ASTIC pronricre

| | lPVCCBlack or Blue) | |

JEQU LUEN FLAS TIC INDUSTRIAL CO., LTD,

(or EQU.) 5. |PVC WIRE}UL1007 #26AWG VU 1 OVVI/D.SA Oo. Di..zlL\

80C |E108485 TY OALOTIIS"C AYN REI HSING WIRE CO., LTD. sf... TUATT\

Pe Ss SOV YUN LILA} LOT FLU OFA]

Ul LAZU,

| 6. |HOUSING [NYLON 66 (2020-03) | [B115256 [EVER CONNECTOR INDUSTRIAL CO., LTD.

| | T ee BRONZE eo | (or EQU.) TIN PTI_ATEFTD (9019P) 8. SOLDER LEAD F FREE BAR LICHUANG(TAISHAN) ELECTRONIC TECHNOLOGY APPROVED BY : CHECKED BY :

PAGE: 3/4 hm: st = &S& BH =

oe = ~ fs res - a) Master Force Components Co.,. Ltd. SPECTRICATION BOR APPROVAT. EE ee ee aaa = 6 eo.cU SS @ eS e262 2 425% 4" * &

a insheateie er URYA SB] GAA T6440017 CUSTOMER NAME: #28 -7b34 (GA BRA By CUSTOMER PT/NO.: 1-19-20007-00001H Oneanadeosooseonoooosasesoosseensonsoseseonncnnannesnnennanemannnsnienn ene ee ee nn ne en ee ee ee eee sense nse eeee DESCRIPTION: __R10x35 / CHOKE COIL(LF) SttOeeNERESL SPT ET TST LT TSE LE SESE LOLS SEES EEEEEEEENEEEELEETNTCLESORESEREEOSLEEDESSESSRG HOS REE SORE SS SRE EEESEESES SAMPLE SUBMIT NO.: MF-20007 REVISION: DATE: APR.28.2020 ooo ooeee:

TEST ITEM INDUCTANCE DC RESISTANCE HI - POT COIL - CORE COIL - CORE TEST FREQ. @ 1 KHz, 1 Vrms @ 60 Hz MF SPEC. 162.0 uH 610.0 mQ AC 0.5 KV DC 500 V 3 mA, | min. 100 MQ MIN. m99 510.7 cmon OK ray OK 7 162.0 HVA eE 513.7 VIX OK UK OK 1. TEST INSTRUMENTS: CHEN HWA LCR METER 102 or BQU. ieee imma eae teat ieiiiete athe ete cae aie ie Tas ca i steam neeiae ise etn on came cannulae. CHEN HWA SUZAC DIGITAL QHM METER or EQU. CUEN LIWUA OUT ONO BR TN ee SS UV EE RT IM VE ERE Ue

| 2. TEST CONDITION: TEMPERATURE: 25 C HUMIDITY: 70 % RH ae ae oe ae BY ae BY:

B!

WW 4 eet ae af Eh NE PAGE: 4/4 Master Force Components Co., Ltd.

 

 

Confidential Information Version 1.00 1 / 8 Confidential Information Version 1.00 SPECIFICATION Shenzhen HaoTian Technology Co., Ltd. GT500V- WIFI GT500V-

R F WIFI/BT V1.0 2019-02-25 2 / 8 Confidential Information Version 1.00 1. ........................................................................................................................... 4 2. ....................................................................................................................................... 4 3. ................................................................................................................................... 4 3.1. ...................................................................................................................... 4 3.2. ...................................................................................................................... 4 3.3. ...................................................................................................................... 5 3.4. .......................................................................................................... 5 3.5. ...................................................................................................................... 5 4. ............................................................................................................................ ..7 4.1. ...................................................................................................................... 7 4.2. ...................................................................................................................... 7 5 SGS . MSDS REACH ....................................................................... 8 3 / 8 1. Confidential Information Version 1.00 GT500V- WIFI/GPS/BT 2.

(MHz)

(MHz) GSM 824~1909 869~1989 4G 1925~2690 2115~2690 WIFI&BT 2.4G~2.5G 3. 3.1. 3.2. WIFI&BT Element E1(0402) E2(0402) E3(0402) Value 4 / 8 Confidential Information Version 1.00 3.3 50 ohm 3.4 :

3.5 5 / 8 Confidential Information Version 1.00 6 / 8 8

7 0 0

. 1 n o i s r e V n o i t a m r o f n I l a i t n e d i f n o C C P F

4 1

. 4 2

. 4 5 SGS . MSDS REACH Confidential Information Version 1.00 SGS . MSDS REACH 8 / 8 For Question Please Contact with SGS www.sgs.com.tw

Test Report

*CE/2018/11944*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

/ Analytical flow chart of Heavy Metal

These samples were dissolved totally by pre-conditioning method according to below flow chart. Cr6+ test method excluded

/ Technician : JR Wang

/ Supervisor: Troy Chang

/ CuttingPreparation

/ Sample Measurement

Pb/ Cd/ Hg

Cr(VI)

/ Acid digestion with microwave / hotplate

/ Non-metal

/ Metal

/ Filtration

/ Solution

/ Residue ABS / PC / PVC

/Others

Dissolving by ultrasonication

150~160

/ Digesting at 150~160 1) / Alkali fusion 2) / HCl to dissolve

60

Digesting at 60 by ultrasonication

Separating to get aqueous phase

/ ICP-AES

pH / pH adjustment

/ Boiling water extraction

Cool, filter digestate through filter

Add diphenyl-

carbazide for color development

UV-VIS

540 nm

/ Measure the absorbance at 540 nm by UV-VIS

/ Add diphenyl-

carbazide for color development

UV-VIS 540 nm

/ Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

/ / Analytical flow chart - PBB/PBDE

/ Technician: Yaling Tu

/ Supervisor: Troy Chang

/ First testing process

/ Optional screen process

/ Confirmation process Sample / Sample pretreatment / Screen analysis / Sample extraction /

Soxhlet method Concentrate/Dilute Extracted solution

/ Filter / GC/MS / This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

/ Analytical flow chart - Phthalate

/ Technician: Andy Hsu

/ Supervisor : Troy Chang

/Test method: IEC 62321-8

Sample pretreatment/separation

THF /

Sample dissolved/extracted by THF

Dilute Extracted solution

Analysis was performed by GC/MS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

/ Analytical flow chart - Halogen

/ Technician: Rita Chen

/ Supervisor: Troy Chang

Sample pretreatment/separation

Weighting and putting sample in cell

/ Oxygen Bomb Combustion / Absorption

Dilution to fixed volume

Analysis was performed by IC This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group

Test Report

*CE/2018/11944*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group For Question Please Contact with SGS www.sgs.com.tw

Test Report

*CE/2017/B1318*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

/ Analytical flow chart of Heavy Metal

These samples were dissolved totally by pre-conditioning method according to below flow chart. Cr6+ test method excluded

/ Technician : JR Wang

/ Supervisor: Troy Chang

/ CuttingPreparation

/ Sample Measurement

Pb/ Cd/ Hg/ Cr

Cr(VI)

/ Acid digestion with microwave / hotplate

/ Filtration

/ Non-metal

/ Metal ABS / PC / PVC

/Others

Dissolving by ultrasonication

150~160

/ Digesting at 150~160

/ Solution

/ Residue 1) / Alkali fusion 2) / HCl to dissolve

60

Digesting at 60 by ultrasonication

Separating to get aqueous phase

/ ICP-AES

pH / pH adjustment

/ Add diphenyl-

carbazide for color development

UV-VIS 540 nm

/ Measure the absorbance at 540 nm by UV-VIS

/ Boiling water extraction

Cool, filter digestate through filter

Add diphenyl-

carbazide for color development

UV-VIS

540 nm

/ Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

/ Analytical flow chart - HBCDD

/ Technician: Yaling Tu

/ Supervisor: Troy Chang

/ Sample pretreatment

Sample extraction /

Ultrasonic method

Concentrate/Dilute Extracted solution

/ Filter

Analysis was performed by GC/MS

/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

/ / Analytical flow chart - PBB/PBDE

/ Technician: Yaling Tu

/ Supervisor: Troy Chang

/ First testing process

/ Optional screen process

/ Confirmation process Sample / Sample pretreatment / Screen analysis / Sample extraction /

Soxhlet method Concentrate/Dilute Extracted solution

/ Filter / GC/MS / This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

/ Analytical flow chart - Phthalate

/ Technician: Andy Hsu

/ Supervisor : Troy Chang

/Test method: IEC 62321-8

Sample pretreatment/separation

THF /

Sample dissolved/extracted by THF

Dilute Extracted solution

Analysis was performed by GC/MS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

Test Report

*CE/2017/B1318*

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.twg Member of the SGS Group

. //0123/450607318281821 1827./ .9/12:222

%#7

3/91<8

1218

=8

/9845=87>9/12

@.8

29/12

/ 2?45

/ 2?45

+82. 382/98 73183/45).

/ 8)@9>)8313)"?</29.313)/>73128 71.2>/4++5)/>7312881.2>/.4+528../9.

+14*.>/.?>/5../4"5)+>/72A>/../4++5)17>/

../4+5)28117>/../4$+593/>01../1317>

"191<4,56!B3281222?$$191<6!6,

12:2

<812>

9112

9132

%3/$

9112

* C:C

3D 4536DE3EF 45@E@.8912131 4B5E984G@5 4;5C*CE/8

"191<4,56!B3281222?$$191<6!6,

@.8 H1. 29$!B*;B)$!B*B)$!B**)$!B*!

28$!B*)2/>A87>$*&),I*I128%*@

,21

"?</2.31344I$55

$345

8313485

8475

@9>4"5

3 ++

@27371.2>/

17371.2>/

17371.2>/

7371.2>/

27371.2>/

"?7371.2>/

"7371.2>/

&97371.2>/

27371.2>/

97371.2>/

3 +

@27381.2>/.

17381.2>/.

17381.2>/.

7381.2>/.

27381.2>/. 131

36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D 36D

B !

$345

"?7381.2>/.

"7381.2>/.

&97381.2>/.

27381.2>/.

97381.2>/.

17>/../4+5

+>/72A>/../4++5

+14*.>/.?>/5../4"5

117>/../4$+5

131

,21

36D 36D 36D 36D 36D 36D 36D 36D 36D

45.3?1333117//1311=8 3"191<4,56!B

$!B11=1</2!B1

.6600092/968>260006 JE;B;BB:K&%K$):K%K$!B

7686"6!L6++6+12:/0.

5 !H12226<18@16/>2

5!6M.6@D>2 B5.3/081/<8//>7>*928112123.8998127/0 /09. 4!L28++6+3.8?9/885

)&#&#3

./)0("&

1) 2/)

1

.5:<.9:;

9:;1

8""

).5

1

433

67"

).5

1

433

../12:/0.

5 3 .20.3812<18@1

5 3 .2129. 12M.

3/.

%.219..2112/2/> NNN28 NNN

$%&()*+,-./01234567

89:!

HI

JK JL

ABCD?@

,EF%G

,EF%G 6M.N(OPQRSTUTVTWXYTZ[\]TZ[^]

_T]^abcd]^ab^ecT]^abef cT]^ab^g6h6ci]^ab^jec Q

JKklmn!op""#qr Qstop#"$Qu

?@v

w):!x Qyzw

JK

4"

%,HI

!op""#qr Qstop#"$

HI E 0% R R R

i $ R 1R#223i%OPv WXY2 Z[\]&i

' U4 V* S5 G[\]

[\] W[\]

[\] G[^]_

u

Z[^]_&i

[^]_ W[^]_

]^ab^ec

]^abefc

]^ab^g66c

]^ab^jec

u

u!op#"$6 v

M 7889"":::;<=<><;<?"5(=":::"@A9,$BC1!C BCC $

!mnHHQ!op#"$qr u]

^abcRRi v`Qop(QGG]^abc

-v

!R i QMRR R8iv

i QMQ1(M sTT`1/Q$1QR

RR8iv

TiQM(Rx"qrD2 h( QTiOPv

B

HI E$ HI OP

MCDTTT('QR0Ev

q

Y

A pq l$B

>?@ USSVVYY

RSEA TUVWEAX

Z[\]ZZ[^]]_

ij;< k7OPb;<

'-.#/012&3456

(7% 89:;<WXYiZ[\]Z[^]_=v

\]l^

_O[

efIgh

bR<

%o;< MNFO

OOPQ

Z[[\

FG ^]H I^JK

a=O[ oR< mn bcd RX LB LB

Y LB

^rDZ WXY

$B CDEA FG ^]

HI^JK MNFO OOPQ LB

q

"stu

'-.12 v v v v v v v v v v v v v v v

>?@v

Av

RSEAv TUwVWv Yv LBv

Z[x[\v

q

'-.|} v v v v v v v v v v v v v v v

yzI ! s~yzv

dQa=v

>?@v

Av Yv LBv

^[R?p

23v

Mtw EEE9EEE

 

 

RF_160, Issue 04

|ATE@

ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) Declaration of Authorization We Name: ATEQ INSTRUMENTS (ASIA)PTE LTD. TAIWAN BRANCH (SINGAPORE) Address: NO.3, LANE223, SAN JIA DONG STREET, 40642, City: TAICHUNG, Country: TAIWAN Declare that:

Name Representative of agent: _ Rita Lin Agent Company name: Worldwide Testing Services (Taiwan) Co., Ltd Address: 6F., No. 58, Lane 188, Ruey Kuang Road, Neihu, City: Taipei 114 Country Taiwan is authorized to apply for Certification of the following product(s):

Product description: Tire-pressure monitoring system Type designation: TPMS5 Trademark: Snap-on Validity/ expiry date on our behalf. Date: 2020/08/04 City: Taichung Name: Roger LIN Function: R/D Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

 

 

 

 

 

 

FCC, Request for non-disclosure Date: 04-Aug-2020 RF_501, Issue 8 Page 1 of 1 Company Name: ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) Address: NO.3, LANE223, SAN JIA DONG STREET, 40642, City: TAICHUNG, Country: TAIWAN To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2ANR7-TPMS5 Reference number: #####+

eee Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

L] Bill(s) of Material XX] Block Diagrams XX] Operational Description [xX] Schematic Diagrams [_] Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

L] Internal Photos [[] Users Manual L_] Test Set-up Photos [-] External Photos Justification:

Date: 2020-08-04 Name and signature of applicant: Roger LIN h2 04}

Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

 

 

FCC FEDERAL COMMUNICATIONS COMMISSION SUPPLIERS DECLARATION OF CONFORMITY

(SDoC) Equipment: Tire-pressure monitoring system Trademark(s) and Model(s): Snap-on / TPMS5 Manufacturer: Might Electronic Co., Ltd. FCC ID in case other parts of this 2ANR7-TPMS5 equipment are subject to certification:

This device complies with Part 15C of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration:

Test report number: Issue date:

W6M22006-19964-P-15B 2020-08-04. The following manufacturer/importer/entity (located in the USA) is responsible for this declaration:

Company name: ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) Name/Title (legal representative): Roger LIN / R&D Manager Address: NO.3, LANE223, SAN JIA DONG STREET, 40642, TAICHUNG, TAIWAN Phone: +886-4-2437-5278 Fax: +886-4-2437-3675 E-mail: roger@ateq.com.tw Date: wv 2020/08/04 Signature: \<e Aw