all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual | Users Manual | 4.01 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Internal Photos | Internal Photos | 1.60 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
External Photos | External Photos | 553.86 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
ID Label/Location Info | ID Label/Location Info | 96.43 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Antenna Specification for UHF | Cover Letter(s) | 408.96 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Antenna Specification for WLAN 2.4G 5G | Cover Letter(s) | 4.35 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 | Block Diagram | Block Diagram | December 18 2020 | confidential | ||||
1 2 3 4 |
|
Declaration | Cover Letter(s) | 295.74 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Declaration of authorization | Cover Letter(s) | 315.55 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 | NII Software Security Info | Operational Description | December 18 2020 | confidential | ||||
1 2 3 4 | Operational Description | Operational Description | December 18 2020 | confidential | ||||
1 2 3 4 | Schematics | Schematics | December 18 2020 | confidential | ||||
1 2 3 4 | Schematics RF part | Schematics | December 18 2020 | confidential | ||||
1 2 3 4 |
|
Test Report NII | Test Report | 2.76 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR | RF Exposure Info | 1.23 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix A | RF Exposure Info | 264.59 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix B | RF Exposure Info | 263.36 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix C 1 | RF Exposure Info | 4.77 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix C 2 | RF Exposure Info | 4.99 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix C 3 | RF Exposure Info | 5.24 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix C 4 | RF Exposure Info | 5.22 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report SAR Appendix C 5 | RF Exposure Info | 1.87 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Setup Photos NII | Test Setup Photos | 1.75 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Setup Photos SAR | Test Setup Photos | 126.67 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
confidentiality | Cover Letter(s) | 457.14 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report DTS | Test Report | 3.76 MiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
MPE | RF Exposure Info | 78.13 KiB | December 18 2020 / December 23 2020 | |||
1 2 3 4 |
|
Test Report DCD | Test Report | 1.15 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Users Manual | Users Manual | 4.01 MiB | December 18 2020 / December 23 2020 |
USER MANUAL ATEQ VT66MB Version 1.0 www.ateq-tpms.com Reference: UM-VT66MB-EN ATEQ VT66MB 1 Revision of Tool We continuously work on improving our products. This is why the information contained in this user manual, the tool and its technical specifications may be modified without notice. Edition/Revision Reference Chapters updated Date
(week/year) First edition UM-VT66MB-EN 20/2020 Creation UM-VT66MB-EN ATEQ VT66MB User manual Page 2/81 ATEQ VT66MB 2 Safety recommendation 2.1 Regarding electromagnetic field emission devices The VT66MB tool is a device that emits electromagnetic waves when in use:
The tool can interfere with the operation of pacemakers, People who have pacemakers should never use the tool, Use of and access to the tool must be controlled. No electromagnetic field is produced when the device is not transmitting. So there is no exposure during this period. Operation of the tool:
produces no harmful interference, can be affected by any type of interference, certain interference may cause a malfunction. 2.2 Safety information Please read this information before using the tool. Always follow these safety instructions. Your Tire Pressure Monitoring System (TPMS) tool has been designed to be durable, safe and reliable when properly used. All ATEQ TPMS tools are intended to be used only by qualified and trained automotive technicians in a laboratory, or in a light industrial or repair shop environment. If you have any questions on the safe use of this tool, please contact your local dealer. 2.2.1 Read all the instructions All the information in this manual concerning the tool must be adhered to. All operating instructions must be followed. 2.2.2 Keep these instructions in a safe place The safety and operating instructions should be kept in a safe place for future reference. 2.2.3 Cleaning UM-VT66MB-EN ATEQ VT66MB User manual Page 3/81 ATEQ VT66MB water. Clean the tool with a soft dry cloth, or if necessary, with a soft damp cloth with clean Do not use any harsh chemical solvents such as acetone, thinner, brake cleaner, alcohol, etc as this may damage the tool. 2.2.4 Water & Moisture Do not put the tool in contact with water or any other liquid. Never spill liquid of any kind onto the tool. 2.2.5 Storage Do not use or store the tool in an area:
exposed to direct sunlight, subject to excessive moisture. 2.2.6 Usage To reduce the risk of fire, do not operate the tool:
o o in the vicinity of flammable liquids, in case of risk of exposure to explosive gases or vapors. Keep the tool away from heat sources. Do not operate the tool with the battery cover removed. Do not position the equipment so that it is difficult to operate the disconnecting device. 2.3 Standards and references This device complies with:
CE / EN standards Part 15 of the FCC Rules RoHS standards 2.4 Warnings Read the instructions before use. Wear safety goggles (user and bystanders). Do not use on live electrical circuits. Risk of entanglement. Read the information on the declarations of certification and on recycling the VT66MB tool on the warranty page 69 of this user guide. UM-VT66MB-EN ATEQ VT66MB User manual Page 4/81 ATEQ VT66MB 3 Description of the ATEQ VT66MB tool 3.1 Overview of the tool The ATEQ VT66MB tool is made for the servicing of TPMS1 sensors installed in the tire assembly. The tool:
activates, reads, diagnoses TPMS sensors, resets the vehicle's TPMS computer through the OBD-II interface, reads RFID2 tags that identify the tires of certain Daimler vehicles, and allows the programming of RFID Tire Data to these vehicles, provides a catalogue of TPMS sensor spare part references, allows programming of aftermarket sensors, for non-Daimler vehicles checks correct operation of the Remote Keyless Entry fob. checks tire tread depth using an optional accessory, The Tool is compatible with the following types of vehicles:
o Daimler light vehicles, o Daimler trucks, o Daimler buses, o Light vehicles of other brands The RFID3 tags that identify the tires of certain Daimler vehicles. 3 1 TPMS: Tire Pressure Monitoring System. 2 RFID: Radio Frequency Identification, "contactless". UM-VT66MB-EN ATEQ VT66MB User manual Page 5/81 ATEQ VT66MB 3.2 Front panel LF antenna for activating TPMS sensors Confirm Button Touch screen Cancel Button UM-VT66MB-EN ATEQ VT66MB User manual Page 6/81 ATEQ VT66MB 3.3 Back panel RFID antenna for reading tire RFID tags Speaker Flash light Camera lens UM-VT66MB-EN ATEQ VT66MB User manual Page 7/81 ATEQ VT66MB 3.4 Top edge USB connector OBD-II connector RJ45 connector for optional accessories Power ON/OFF 3.5 Connectors The VT66MB tool integrates the following connectors:
USB C - to recharge and update the tool, RJ45 - to connect optional accessories like the tire tread depth gauge (TTD), OBD-II - to connect the tool to a vehicles OBD diagnostic socket. 3.6 Function keys ON/OFF button Confirm button UM-VT66MB-EN ATEQ VT66MB User manual Page 8/81 ATEQ VT66MB Cancel button 3.7 Product content The ATEQ VT66MB kit includes:
The tool OBD-II cable USB data cable Mains power charger EU, UK and US adapters for charger Quick Start Guide Transport case Optional accessories:
Tire tread depth gauge (TTD) UM-VT66MB-EN ATEQ VT66MB User manual Page 9/81 ATEQ VT66MB 4 Before starting 4.1 Charging Charge the tool before using it the first time. Connect the charging cable to the mains and to the USB-C port of the tool. Be sure to charge it regularly, not to fully discharge the battery. A battery charge indicator is displayed at the top right of the screen, when the tool is switched on. The battery charge level is given as a percentage. Battery replacement: to purchase a battery replacement, please contact the point of purchase. 4.2 Turning the tool on Press the ON/OFF button for 3 seconds to power up the tool. Add start image The start image is displayed. Add the home screen image The home screen is displayed. The VT66MB tool is ready to use. Press this button and hold for 3 seconds to switch off the tool. 4.3 Configuration WiFi connection To be written AJOUTER Register the tool UM-VT66MB-EN ATEQ VT66MB User manual Page 10/81 ATEQ VT66MB 5 Using the tool IMPORTANT:
Functions Read TPMS ECU-relearn ECU-relearn via OBDII RFID tire data Aftermarket sensor programming Spare parts look-up Tire Tread Depth Remote Keyless Entry fob Support X X X X X X X 5.2 New job Press New Job to enable:
Vehicle specific information in this manual is used as an example and may not represent specific instructions each make and model require. When using the various functions on the TPMS tool, it is important to refer to the on-screen prompts and/or to information in the vehicle's manual. 5.1 Selecting the function Not all features are available for all types of vehicles. Therefore, to access the desired functionality or content, it is necessary to first select the vehicle make model year, and only after that, the desired function. The following functions are available depending on the vehicle selected:
Daimler passenger cars Other passenger cars Trucks Buses Tire set X X X X X X X X X X X X X X X X X X X X selection of a vehicle type to start:
o checking of the TPMS sensors, o relearning of the TPMS sensors by the vehicle, o programming of the TPMS sensors, o reading of the tire data, o spare parts look-up, o o tire tread depth measurement, testing the remote access key UM-VT66MB-EN ATEQ VT66MB User manual Page 11/81 Press New Job, to access to the vehicle category screen. Select from:
ATEQ VT66MB Daimler passenger cars, All passenger cars, Trucks, Buses, Tire set, History of previously saved jobs. 5.2.1 Daimler passenger cars Press DAIMLER Vehicles Passenger Car to create a new job for Daimler passenger cars. Select a Daimler passenger car model on the list of vehicles displayed:
UM-VT66MB-EN ATEQ VT66MB User manual Page 12/81 ATEQ VT66MB Select the year of the Daimler passenger car model:
The screen for checking TPMS sensors is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 13/81 ATEQ VT66MB You are ready to check the TPMS sensors of the configured passenger car. Refer to Erreur ! Source du renvoi introuvable. to follow this procedure. 5.2.2 All vehicles Press All Vehicles to create a new job for passenger cars that are not Daimler. Select a vehicle make in the list:
UM-VT66MB-EN ATEQ VT66MB User manual Page 14/81 ATEQ VT66MB Then choose:
vehicle model, vehicle model production year Once the vehicle model selected, the screen to Read TPMS sensors is displayed. If the selected vehicle has no TPMS sensor (indirect TPMS), a message appears on the screen. You are ready to check the TPMS sensors of the configured passenger car. Refer to chapter Erreur ! Source du renvoi introuvable. to follow this procedure. UM-VT66MB-EN ATEQ VT66MB User manual Page 15/81 ATEQ VT66MB 5.2.3 Daimler trucks Press Truck to create a new job for trucks with up to seven axles, equipped with single or dual tires. Once the truck configuration screen is displayed, select the type of vehicle Tractor/truck, trailer or semitruck. Use the + buttons to the right, to configure the numbers of wheels per axle. Select the number of axles and wheels. The number of wheels are displayed on the diagram of the truck, and underneath the screen. Press on the - or + buttons to add or remove axles and wheels to the truck being configured:
0, 1 or 2 shows the number of wheels on an axle, 0 means that there is no axle to be added 1 means that the axle has single wheels, 2 means that the axle has dual wheels. the vehicle Either press Save, configuration as a favorite and be able to reuse for to store UM-VT66MB-EN ATEQ VT66MB User manual Page 16/81 ATEQ VT66MB other vehicles, or press Next to go directly to the next step. When pressing Save, a new window is opened. Edit a name, then press Save to store the name of the configuration and return to the truck configuration screen. The name of the configuration is shown in the left column of the screen. Reuse the configuration later by displaying this screen and selecting the configuration by name. Press Confirm to complete the truck configuration. A message asks if you want to save your configuration:
press Yes to save your configuration and continue the new job creation, press No to cancel the new job creation and go back to the home screen. 5 custom configurations can be saved. Click in the Configuration button to give a name to each configuration. They Configured view can be deleted by pressing the button for three seconds. UM-VT66MB-EN ATEQ VT66MB User manual Page 17/81 ATEQ VT66MB Once configuration is finalized, refer to Erreur ! Source du renvoi introuvable. chapter XXX. 5.2.4 Daimler buses UM-VT66MB-EN ATEQ VT66MB User manual Page 18/81 ATEQ VT66MB Press Daimler Buses to create a new job for Daimler buses. Select a bus model in the list of vehicles displayed:
Select the year of the bus model:
Bus configuration The screen for checking TPMS sensors is displayed. Refer to Erreur ! Source du renvoi introuvable. to check the TPMS sensors of the configured bus 5.2.5 Tire set The function tire set is used to do a quick check of the Tire Tread Depth on a set of tires without entering the vehicles Make Model Year. This mode is also particularly useful when working on tires that are not linked to a vehicle, such as a batch of tires in the warehouse. The number of tires which can be configured is max. 100. UM-VT66MB-EN ATEQ VT66MB User manual Page 19/81 ATEQ VT66MB 5.2.6 Tire Tread Depth The Tire Tread Depth gauge (TTD) available as an option, and provides an accurate measurement of the depth of tire treads, for light passenger vehicles. The Gauge is not suited for measuring Truck or Bus tires. Access the Tire Tread Depth function by selecting Daimler Vehicles, Other Vehicle Brands or Tire Set to check the tread depth on a single tire or of a tire set. The Tire Set menu can be used to measure Tread Depth on a undefined number of tires (a stack of tires, or for warehouse management), not necessarily linked to a vehicle. When clicking on the Tire Set icon, the below screen for checking tire tread depth is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 20/81 ATEQ VT66MB By default, the screen displays a set of 4 tires. If the vehicle has no spare tire, the procedure can be stopped at the fourth tire. To check more that four tires, use the Tire Set Menu and press the + displayed, to add up to 100 additional tires. Connect the accessory to the tool, to check the tread depth of a tire set:
connect the tire tread depth gauge to the RJ45 connector on the tool. the green light on the gauge will illuminate, once successfully connected Starting with the front left wheel:
apply the tire depth gauge to the inner groove then press the button on the gauge once to start the measurement, a beep will sound once measurement has succeeded. apply the tire depth gauge to the centre groove, without pressing the button on the gauge, hold until the beep sounds and the second measurement has been recorded. apply the tire depth gauge to the outer groove, hold until the beep sounds and the outer measurement has been recorded. The tire tread depth measurements indicate:
green = higher than the legal standard, orange = close to the legal limit, red = underneath the legal limit. UM-VT66MB-EN ATEQ VT66MB User manual Page 21/81 ATEQ VT66MB Perform this operation for all wheels:
front right wheel, rear right wheel, rear left wheel, any spare tire. 5.2.6.1 Adding notes UM-VT66MB-EN ATEQ VT66MB User manual Page 22/81 ATEQ VT66MB You can add a photo or a written note for each tires, e.g. for a tear or visible defect. Press the pencil icon displayed by each tire. The notes screen is displayed. Enter your text in the Notes box using the onscreen keypad. Press the camera button, to take a picture of the tire Press Save when finished. 5.2.7 History The history function, allows to access a previously saved job and modify it, to print out a job report, export or delete saved data. Press History to display the history of data saved on the VT66MB tool. The History screen displays the data saved. UM-VT66MB-EN ATEQ VT66MB User manual Page 23/81 ATEQ VT66MB Sort the list of saved data by clicking the column headings: Date/Time, Name or Make/Model/Year to sort by vehicle model. To delete recordings in the history, tick the box to select the jobs to erase, and press the Delete button. To erase all jobs, tick the box in the upper menu. Click on the Search icon to look for data by entering a date, name or vehicle model. Click the Share icon to share the selected data by email. Select one job, click the PDF icon to create a PDF document from the selected data. Touch a row of data to open up and edit the job. The previous job will not be saved. UM-VT66MB-EN ATEQ VT66MB User manual Page 24/81 ATEQ VT66MB 5.3 Read TPMS The Read TPMS function consists in activating the TPMS sensors to read their data:
sensor ID, sensor battery status. tire pressure, temperature inside the tire, radio frequency of communication between the sensor and the tool, This procedure:
verifies the current tire pressure and tire temperature ensures the TPMS sensors are working properly, determines if TPMS sensors are defective or low on battery 5.3.1 Read TPMS procedure To achieve the best TPMS sensor reading, point the Tool's antenna towards the tire, on the tire wall right next to the valve. Do not point the antenna against the rim or the valve stem. 5.3.2 Reading a TPMS sensor To read the TPMS sensors, press the button New Job and select a vehicle Make, Model and Year. UM-VT66MB-EN ATEQ VT66MB User manual Page 25/81 ATEQ VT66MB When you have selected the vehicle, the Read TPMS screen is displayed,
the FL (Front Left) tire is circled in red to show that the reading of the TPMS sensor concerns the front left wheel the first row displays the message Ready to Trigger. Place the tool against the sidewall of the front left wheel. Press the activation button displayed in the bottom left corner of the screen or use the activation button The tool comes on and reads the TPMS sensor of the front left wheel. An animation is displayed on the FL row (Front Left) during the sensor activation process, until the TPMS sensor has been located and read out. Data from the sensor is displayed in the FL row. This data includes:
ID, sensor identifier, PSI or BAR, pressure read in the tire in PSI or BAR, F or C, temperature found in the tire in degrees Fahrenheit or degrees Celsius, MHz, sensor communication frequency, BAT, sensor battery status. UM-VT66MB-EN ATEQ VT66MB User manual Page 26/81 ATEQ VT66MB Perform the same operation for the Front Right (FR) wheel. Continue for the wheels:
Rear Right (RR), Rear Left (RL), Spare (B) if the vehicle has a TPMS sensor in the spare tire. The sensor data is displayed on screen. UM-VT66MB-EN ATEQ VT66MB User manual Page 27/81 ATEQ VT66MB 5.3.3 Settings 5.3.3.1 Winter tire set/summer tire set 5.3.3.2 ID (identifier) 5.3.3.3 Pressure 5.3.3.4 Temperature 5.3.3.5 Frequency 5.3.3.6 Battery 5.3.3.7 Complete page 5.3.4 Printing 5.4 Relearn The relearn consist of pairing the IDs of the TPMS sensors fitted on the vehicle with its ECU
(Engine Control Unit). The relearn procedure is useful after:
a sensor change (e.g. in case of a defective sensor), wheel change (e.g. wheels with winter tires changed for wheels fitted with summer tires). wheel rotation UM-VT66MB-EN ATEQ VT66MB User manual Page 28/81 ATEQ VT66MB 5.4.1 Relearn procedure overview There are three relearn procedures:
manual relearn, auto relearn OBD relearn The Tool indicates the right procedure to follow for each vehicle make, model and year. In certain cases, more than one relearn method is possible. 5.4.2 Manual or auto relearn For vehicles that require manual or auto relearn:
Press New job and select the vehicles Make, Model and Year. press Relearn. The relearn screen is displayed. Press Manual or Auto Relearn UM-VT66MB-EN ATEQ VT66MB User manual Page 29/81 ATEQ VT66MB A text explains step by step how to pair the vehicles ECU with the IDs of the vehicles TPMS Read and follow the on screen the procedure To activate the sensors, during the process press Read all sensors in the order as shown on the Start Procedure. screen. For vehicles with auto relearn, it is recommended to check the TPMS sensors before starting the auto relearn procedure, to ensure tire pressure all sensors respond and that the tire pressure is correct. 5.4.3 OBD relearn Please note that OBD relearn procedures are not available for Daimler vehicles. The OBD procedure permits to write the TPMS sensor IDs directly into the ECU, in less than 1 minute. The procedure resets the TPMS system and turns the TPMS light off. To start an OBD relearn:
UM-VT66MB-EN ATEQ VT66MB User manual Page 30/81 ATEQ VT66MB create a New job, press Relearn. The relearn screen is displayed. Select OBD-II Relearn Read the whole OBD Relearn procedure throroghly, then follow the instructions, step by step. UM-VT66MB-EN ATEQ VT66MB User manual Page 31/81 ATEQ VT66MB To activate the sensors press Start Procedure. Connect the tool to the vehicle's OBD port using the supplied cable then follow the onscreen instructions. UM-VT66MB-EN ATEQ VT66MB User manual Page 32/81 ATEQ VT66MB 5.4.3.1 OBD errors If the OBD relearn procedure fails, check the following:
If the"Check connection / Switch on ignition" message appears:
o ensure that the ignition is ON in position I (radio and infotainment systems turns on), motor OFF. o check that the OBD cable is correctly connected to the vehicle, o check that the OBD icon displays on the tool screen, upper left hand corner. o If the three points above are correct:
check that you have the latest software version for your TPMS tool, check the battery voltage, the vehicle's battery must be sufficiently charged to reprogram the TPMS ECU, check that the diagnosed vehicle does not propose an alternative relearn mode (auto or manual). 5.4.4 Special case of vehicles fitted with indirect TPMS sensors Some vehicles are fitted with an indirect TPMS system. These vehicles have no TPMS sensor, they use another system to check tire pressures. The Read TPMS and relearn procedures cannot be used on these vehicles. Even though there are no TPMS sensors, vehicles fitted with an indirect TPMS system may require a relearn. These procedures can also be found in the tool. 5.5 Spare parts look-up UM-VT66MB-EN ATEQ VT66MB User manual Page 33/81 ATEQ VT66MB The Spare part look-up contains all original equipment (OE) spare part numbers for Daimler vehicles, as well as Aftermarket spare parts for all other vehicles. The spare parts database contains:
TPMS sensors part numbers service Kit part numbers Torque specifications for the sensors and their parts. 5.5.1 Daimler vehicle spare parts This procedure is for finding the OE Part Numbers of the TPMS sensors and their accessories mounted on Daimler vehicles. For certain compatible Daimler sensor, it is possible to double check the part number of the sensor, by activating a special command to read the information stored inside the sensor. To find the part number of a TPMS sensor of a Daimler vehicle:
create a New job and select a Daimler vehicle, press Part Look-up. The sensor part number look-up screen is displayed. The OE part numbers of the TPMS sensors and their accessories for the Daimler vehicle are displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 34/81 ATEQ VT66MB In case the Verify Sensor Reference button is available, put the TPMS in front of the tool antenna, and press Verify Sensor Reference. The part number of the tested TPMS sensor is displayed at the bottom of the screen:
green with the message This sensor is compatible if the sensor part number corresponds to the vehicle seleceted, red with the message no sensor found or sensor is not compatible if the sensor is not compatible. 5.5.2 Other vehicle spare parts UM-VT66MB-EN ATEQ VT66MB User manual Page 35/81 ATEQ VT66MB To find the OE TPMS sensor references and spare parts for Other vehicles:
Select Other vehicles > Make > Model > Year press Part Look-up. The part numbers of the TPMS sensor and its spares are displayed onscreen. 5.6 Tire data 5.6.1 Introduction 5.6.1.1 What is SGTIN96?
tire manufacturer date of manufacture, place of manufacture, tire dimension tire specifications The SGTIN96 is a 96-caracter data string embedded in an RFID tag, providing the tire's identity card. The data string is unique to each tire and contains the following tire data:
When the SGTIN96 is communicated to a Cloud based platform, it is possible to obtain additional data, such as Certain Daimler vehicles allow to write the SGTIN96 data string into its TPMS sensors, when the sensor is installed in the inflated tire. The sensor will then communicate the tire characteristics to the vehicle to optimize its performance. UM-VT66MB-EN ATEQ VT66MB User manual Page 36/81 ATEQ VT66MB Once the data is written to the TPMS sensor, it is possible to activate the sensor to read out and check the SGTIN96 tire data. 5.6.1.2 What is the integrity level?
The SGTIN96 ID is copied in the memory of the TPMS sensor equipping the wheel the tire is fitted on. You can easily recover this ID as soon as the TPMS sensor communicates with the vehicle's computers. TPMS sensors equipping the wheels fitted with tires have an SGTIN86 tag including as well as the usual TPMS data:
the tire's unique ID (SGTIN96), the integrity level. To ensure the reliability of the data over time, the SGTIN96 ID data recorded in the TPMS sensor, the data is attributed an integrity level. There are 5 integrity levels for the SGTIN96 ID:
Level Reliability Comments Level 1 Perfect Level 2 Correct Level 3 Acceptable Level 4 Not reliable Level 5 N/A Programming carried out by the tire manufacturer. Programming by secure automatic process. Non-replaceable sensor. Programming carried out in after-sales in workshop. Programming by secure automatic process (Erreur !
Source du renvoi introuvable. procedure). Replaceable sensor. Programming carried out manually. Replaceable sensor. The sensor detected a pressure drop inside the tire and shows that the SGTIN96 ID is not reliable (the tire may have been changed). You can program the tire data as shown in the Erreur ! Source du renvoi introuvable. procedure to bring the sensor to Level 2. New sensor not containing any tire relevant data. You can program the tire data as shown in the Erreur ! Source du renvoi introuvable. procedure to bring the sensor to Level 2. 5.6.1.3 Which vehicles?
UM-VT66MB-EN ATEQ VT66MB User manual Page 37/81 ATEQ VT66MB To know if the vehicle tires can be equipped with RFID tire data, select the Make Model Year. Only vehicles where the Tire Data icon is accessible, are equipped with sensors allowing RFID Tire Data programming, such as the Mercedes S Class. 5.6.2 Programming RFID Tire Data The programming of Tire Data consists in saving the tire identification of the fitted tire, to the TPMS sensor on the same wheel. To program the RFID tire data on a Daimler vehicle:
create a New job, press Tire Data. The Tire Data reading and programming screen is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 38/81 ATEQ VT66MB Press Program to start the Tire Data programming procedure. The tool is ready to program the data. Place the tool near the valve of the front left wheel. Press Trigger to start the programming. Start reading the tire's SGTIN96 code by RFID (contactless) on the Left Front wheel. On most tires the RFID tag is embedded in the tire's outer sidewall, however the exact location is unknown. Move the tool in a large circular movement, at approximately 15 cm from around the front left tire. Direct the tools RFID antenna - situated on the back of the device -
towards the sidewall. A beep indicates the correct reading of the RFID tag, and the SGTIN96 code is displayed on the Front Left row. UM-VT66MB-EN ATEQ VT66MB User manual Page 39/81 ATEQ VT66MB If reading the SGTIN96 code fails, move the tool further away from the tire and restart the procedure. In the case of repeated failures, put the vehicle on a lift to easily access the tire's inner side or remove the wheel. NOTE: The RFID tag is situated on the same side wall as the DOT number, and tire specification. On directional tires, the RFID will in this case be located on the tire's inner sidewall. In this case, direct the tool's RFID antenna towards the wheel arch to reach the inside of the tire. Remain on the same Front Left tire, and place the TPMS tool antenna near the valve stem. Press the TPMS activation button once, and wait until a beep confirms the successful programming of the RFID Tire Data into the sensor.. An animation shows that the data of the TPMS sensor is being read and programmed. UM-VT66MB-EN ATEQ VT66MB User manual Page 40/81 ATEQ VT66MB Continue to the Front Right tire, The ID of the TPMS sensor is displayed in the FL row. When the message Programmed is displayed is green, the SGTIN96 code has been saved in the memory of the TPMS sensor. Perform the same operation for the front right wheel, and then for the rear left and rear right wheels. The programming procedure is finished when the 4 SGTIN96 codes of the 4 tires of the vehicle have been saved in the memory of vehicle's 4 TPMS sensors. UM-VT66MB-EN ATEQ VT66MB User manual Page 41/81 ATEQ VT66MB Data is automatically saved at each step. It can be be found in the tool History. It is recommended to read the sensor data to check that all data has been correctly programmed, see chapter (X.X.X). If the procedure has completed successfully, the tire data will have integrity level 2. 5.6.3 Reading the tire data from the sensor After RFID Data programming, and at each maintenance, it is recommended to read the tire data. The Read RFID, permits to verify the integrity, and ensure data is correctly programmed. To read the RFID tire data from the vehicles TPMS sensor:
create a New job, press Tire Data. The tire data reading and programming screen is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 42/81 ATEQ VT66MB Press Read to start the tire data reading procedure. The tool is ready to read the tire data. Place the tool near the valve of the front left wheel. Press the TPMS Activation button to start the reading. The TPMS sensor data from the front wheel is displayed, including:
1. ID, the TPMS sensor identifier, 2. PSI or BAR, the pressure inside the tire, 3. F or C, the temperature inside the tire, 4. MHz, the TPMS sensors signal transmission frequency 5. SGTIN96 code, the tire's unique identification code, UM-VT66MB-EN ATEQ VT66MB User manual Page 43/81 ATEQ VT66MB 6. Integrity, the datas reliability level. Proceed the same way for the front right, the rear right and rear left wheels. 5.7 Programming Aftermarket sensors UM-VT66MB-EN ATEQ VT66MB User manual Page 44/81 ATEQ VT66MB The VT66MB tool allows programming of universal sensors only for Other vehicles. The programming consists of writing an ID into the universal TPMS sensor memory. The tool is compatible with most aftermarket sensor brands. 5.7.1 Programming procedure To start the TPMS sensor programming procedure. Press New job and select the vehicles Make, Model and Year, Press Program. Select the Aftermarket sensor brand The tool proposes five different ways to program sensors. 5.7.2 Creation To write a new ID into the universal TPMS sensor, press Create. It is possible to create from 1 to X sensors. The sensor programming screen is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 45/81 ATEQ VT66MB The compatible sensor brand and models are displayed. Select your model. Put the first sensor to be programmed in front of the antenna of the tool, approx 0-15 cm. Press Trigger. When the ID has been saved in the memory of the first programmable sensor, the message Successful is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 46/81 ATEQ VT66MB Put the second sensor near the antenna of the tool then press the button to program. Do the same for the consecutive sensors to be programmed. Press + if you want to program more than 4 sensors. 5.7.3 Copy UM-VT66MB-EN ATEQ VT66MB User manual Page 47/81 This function enables the original sensor ID to be retrieved and copied into a programmable sensor. ATEQ VT66MB To copy the ID of the original TPMS sensor and put it in the memory of a new programmable sensor, press Copy. The sensor copy screen is displayed. Put the sensor to be copied in front of the antenna, Press Read. The Original Sensor ID is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 48/81 ATEQ VT66MB put the programmable sensor in front of the antenna press Program When the ID has been saved in the programmable sensor, the message Successfully Copied is displayed. 5.7.4 Copying of a set of sensors UM-VT66MB-EN ATEQ VT66MB User manual Page 49/81 ATEQ VT66MB To copy a set of original sensor IDs to a new set of sensors, press Copy Set. The screen for reading the sensors is displayed. Start with the front left wheel and read the original sensors as explained in Erreur ! Source du renvoi introuvable.. When the tire set to be copied has been read, press NEXT. The screen to copy the sensor IDs is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 50/81 ATEQ VT66MB Put a programmable sensor in front of the tools antenna. Put the antenna in front of the Front Left tire of the new tire or new programmable sensor, press Trigger to start the programming of the sensor's ID. The message Copied is displayed UM-VT66MB-EN ATEQ VT66MB User manual Page 51/81 ATEQ VT66MB Follow the same procedure as shown for:
front right tire, rear right tire, rear left tire, any spare tire. 5.7.5 Retrieve IDs from ECU This function enables the sensor IDs saved in the TPMS ECU of the vehicle to be retrieved automatically via the OBDII interface. The IDs can then be copied into a new sensor set. To retrieve the IDs :
press Retrieve ID. connect the tool to the vehicle's OBD-II port using the supplied cable The TPMS sensor reading and programming by OBD connection screen is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 52/81 ATEQ VT66MB Press From ECU to retrieve the IDs saved in the TPMS ECU of the vehicle. All IDs are displayed When the message Ready to Program is displayed, put the tool in front of the sensor to be programmed for the Front Left tire). Ensure that other programmable sensors are more than 1 meter away. UM-VT66MB-EN ATEQ VT66MB User manual Page 53/81 ATEQ VT66MB press the Trigger button When the new sensor has been programmed, the message Copied is displayed green. Perform the same operation for all wheels on the vehicle. 5.7.6 Manual ID This function enables the IDs for damaged sensors to be entered manually. This feature is only available for certain aftermarket sensor brands. UM-VT66MB-EN ATEQ VT66MB User manual Page 54/81 ATEQ VT66MB Press Manual ID. The screen for manually programming the TPMS sensor is displayed. Use the keypad to enter the ID you want to save in the memory of the programmable sensor. UM-VT66MB-EN ATEQ VT66MB User manual Page 55/81 ATEQ VT66MB Validate the entry by pressing enter. The entered ID is saved . UM-VT66MB-EN ATEQ VT66MB User manual Page 56/81 ATEQ VT66MB Put the new programmable sensor in front of the antenna, press Trigger. The message Successful programming is displayed 5.8 Special Function 5.8.1 Key fob test This procedure tests the strength of the Radio Frequency (RF) signal emitted by the remote key. If the signal is weak, replace the key fob battery. To test the key fob:
Press New job and select the vehicles Make, Model and Year press Key Fob Test. The key fob test screen is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 57/81 ATEQ VT66MB Select the radio frequency supported by the vehicle Put the key fob on the right side of the tool Press Key fob test to start the test Press a button on the key fob When emission strength of the key fob is o correct, a green graph is displayed o insufficient, a red graph is displayed. UM-VT66MB-EN ATEQ VT66MB User manual Page 58/81 ATEQ VT66MB UM-VT66MB-EN ATEQ VT66MB User manual Page 59/81 Support is accessible from the Main menu or after having selected a vehicle in the upper right corner of the tool bar. ATEQ VT66MB 6 Support Use this menu to:
update the tool, register the tool, change the settings, see the frequently asked questions contact ATEQ support. 6.1 Registration Register your tool to benefit from updates and technical support. Press User Registration. UM-VT66MB-EN ATEQ VT66MB User manual Page 60/81 ATEQ VT66MB 6.2 Update your tool As soon as a new model or new generation of vehicle comes on the market, or when a new TPMS communication protocol becomes available, it will be necessary to update the TPMS tool. Make sure that the battery is fully charged and to have a stable Wi-Fi connection to Internet before updating. Press Update Your Tool The update screen displays the following information: Tools serial number, software version installed, available software version, license expiry date, and last performed update UM-VT66MB-EN ATEQ VT66MB User manual Page 61/81 ATEQ VT66MB press the button Update Software to access to the latest software version. 6.2.1 Licence renewal The tools user license is valid for 1 year, during which time an unlimited number of software updates can be performed. After this period, renew the license to receive new vehicle data and procedures, new features and new programmable sensors. The license code will prolong the license duration for one year, from the actual expiry date. Press Renew Licence. Enter the code of your new licence then press Confirm. UM-VT66MB-EN ATEQ VT66MB User manual Page 62/81 ATEQ VT66MB 6.3 Settings To configure your tool press Settings. UM-VT66MB-EN ATEQ VT66MB User manual Page 63/81 ATEQ VT66MB Description of available settings :
Vehicle Market Choose your work area (car market) Email Set-up Setting up the message service RFID Region Reader Choosing the region for RFID Tire Data reading Sounds / Haptics Sound and vibration settings Language Auto Off Choosing the interface language Setting the automatic switching off of the tool Screen Lock Setting the screen lock time General Settings Accesses the general settings About Information on the software version 6.4 FAQ Press FAQ. to see the frequently asked questions Select a topic to read the questions and answers for the selected topic. UM-VT66MB-EN ATEQ VT66MB User manual Page 64/81 ATEQ VT66MB 6.5 Contacts Press Contact Support. The address details of Daimler and ATEQ support are displayed. Please contact for questions related to Daimler vehicles or work procedures. Please contact ATEQ questions related to Other vehicles or work procedures. UM-VT66MB-EN ATEQ VT66MB User manual Page 65/81 ATEQ VT66MB UM-VT66MB-EN ATEQ VT66MB User manual Page 66/81 ATEQ VT66MB 7 Technical specifications 7.1 Device specifications Battery Lithium-polymer Battery 6200 mAh Power supply 5 V DC, 2A Dimensions 250 x 160 x 35 mm Weight Software Processor Speaker Microphone Vibrator Screen Memory Camera RFID reader Connectivity ARM MTK Processor, 64 bits, Dual core 380 grams Android 7.0 Yes Yes Yes 8" landscape Resolution 1280 x 800 pixels Touch screen for gloves 16 GB storage Storage on SD card optional 12-megapixel camera Optical character recognition (OCR) ISO/IEC 18000-63 or GS1 EPC Class1 Gen2, 860-930 MHz. The RFID reader adapts the frequency bands according to region Wi-Fi 802.11 a/b/g/n Bluetooth 4.1 (BLE) USB port for connecting storage device USB C port for recharging the device Possible use of USB for updates RJ45 port for connection with TTD UM-VT66MB-EN ATEQ VT66MB User manual Page 67/81 ATEQ VT66MB LF/RF frequencies LF transmission at 125kHz and reception at 315MHz/433MHz Charge indicator LED Materials High Impact ABS. Operating temperature
-10C to +55C Storage temperature
-20C to +65C Relative humidity tolerated in operation 5% to 95%
Liquid ingress protection Dust-protected and protected against splashing water (IP54) Withstands petrol and solvents 7.2 Radio frequency The tools transmission frequency to read TPMS sensors is: 125 kHz (LF). The tools reception frequencies are: 433 and 315 MHz (RF). The RFID reader uses a frequency band from 860 to 930 MHz according to region. 7.3 Sensor type This instrument is designed for:
activating and reading all TPMS sensors using LF/RF technologies, writing data in the memory of compatible programmable sensors. UM-VT66MB-EN ATEQ VT66MB User manual Page 68/81 ATEQ VT66MB 8 Limited hardware warranty 8.1 ATEQ Limited Hardware Warranty ATEQ guarantees to the initial buyer that the ATEQ hardware product is free from any material and manufacturing defect for the period given on the packaging and/or in the product documentation, from the purchase date. Except where prohibited by applicable law, this warranty is non-transferable and is limited to the original buyer. This warranty gives you specific legal rights, and you may also have other rights that vary under local laws. 8.2 Remedies In the event of breach of the warranty, the sole responsibility of ATEQ and your sole remedy consists, at ATEQ's choice, in repairing or replacing the hardware. Shipping and handling charges may apply, unless prohibited by the applicable law. To repair or replace any hardware, ATEQ may, as it chooses, use parts that are new, restored or already used but in good working order. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in your jurisdiction. This warranty does not cover problems or damage resulting (a) from accidents, abuse, incorrect use or any repair, any modification or any unauthorised disassembly; (b) from inappropriate use or maintenance, use not in compliance with the instructions of the product or from connecting to power supply with incorrect voltage; or (c) from use of consumables, such as replacement batteries, not supplied by ATEQ, apart from where such restriction is prohibited by the applicable law. 8.3 How to Obtain Warranty Before submitting a warranty claim, we recommend you visit the technical support section of our website at www.ateq-tpms.com for technical assistance. Valid warranty claims are generally processed through the point of sale during the first thirty (30) days after purchase. However, this period of time may vary depending on the place of purchase. Contact ATEQ or the retailer who sold you the product to get more details. Warranty claims that cannot be processed through the point of sale and any other product-related questions should be addressed directly to ATEQ. The addresses and contact details of ATEQ's customer services are given in the documentation provided with your product, and on the internet at www.ateq-
tpms.com. 8.4 ATEQ VT66MB User guide Limitation of responsibility ATEQ SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, OR ACCIDENTAL DAMAGE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, UM-VT66MB-EN ATEQ VT66MB User manual Page 69/81 ATEQ VT66MB REVENUE OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON YOUR PRODUCT, EVEN IF YOU HAVE NOT BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Some jurisdictions do not allow the exclusion or limitation of special, indirect or accidental damage, and so the above limitations or exclusions may not apply to you. 8.5 Duration of Implied Warranties EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS ON THIS HARDWARE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE APPLICABLE LIMITED WARRANTY PERIOD FOR YOUR PRODUCT. Some jurisdictions do not allow limitations on how long an implied warranty lasts, and so the above limitation may not apply to you. 8.6 National Statutory Rights Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties in this Limited Warranty. 8.7 No Other Warranties No ATEQ dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. 8.8 Warranty Period The warranty period for ATEQ devices is one year. UM-VT66MB-EN ATEQ VT66MB User manual Page 70/81 ATEQ VT66MB 9 Declarations of EC/FCC certification 9.1 Declaration of EC conformity The manufacture of the ATEQ VT66MB declares that this device is in conformity with the relevant Union harmonization legislation:
Low voltage (LVD) Directive 2014/35/EU Electromagnetic Compatibility (EMC) Directive 2014/30/EU Radio Equipment (RED) Directive 2014/53/EU Restriction of the use of certain hazardous substances (RoHS) Directive 2011/65/EU 9.2 Declaration of FCC conformity The manufacture of the ATEQ VT66MB declares that this device complies with the requirements of the standards:
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. PART 15B:2019 PART 15.247:2019 PART 15.407:2019 PART 15.207/209:2019 AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK UM-VT66MB-EN ATEQ VT66MB User manual Page 71/81 ATEQ VT66MB 9.3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2ANR7-VT66 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Innovation, Science and Economic Development Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. UM-VT66MB-EN ATEQ VT66MB User manual Page 72/81 ATEQ VT66MB This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement Radio Frequency Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (SAR) limits when operated in portable exposure conditions. Informations concernant l'exposition aux frquences radio La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce dispositif a t valu pour et dmontr conforme la Taux IC d'absorption spcifique
("SAR") des limites lorsqu'il est utilis dans des conditions d'exposition portatifs. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. UM-VT66MB-EN ATEQ VT66MB User manual Page 73/81 ATEQ VT66MB Product model/product Model Name: VT66MB 9.4. EU DECLARATION OF CONFORMITY Product Name: TPMS (Tire-pressure monitoring system) Tool Name and address of the manufacturer or his authorised representative:
ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) NO.3, LANE 223, SAN JIA DONG STREET, 40642, TAICHUNG, TAIWAN This declaration of conformity is issued under the sole responsibility of the manufacturer. Objection of the declaration Tire-pressure monitoring system The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Radio Equipment (RED) Directive 2014/53/EU 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
RED: EN 300 328 V2.2.2, EN 301 893 V2.1.1, EN 300 330 V2.1.1, EN300 220-1 V3.1.1, EN300 220-2 V3.2.1, EN 302 208 V3.3.1 ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) 7. Additional information:
Signed for and on behalf of:
Taichung, Taiwan 2020/9/02 Roger Lin / RD Manager UM-VT66MB-EN ATEQ VT66MB User manual Page 74/81 ATEQ VT66MB 9.5 Recycling Do not dispose of the rechargeable battery or the tool and/or its accessories in general waste. These components must be collected and recycled. The crossed-out wheelie bin symbol means that the product must be subject to separate collection at the end of its life within the EU. This measure applies not only to your device but also to any other accessory marked with this symbol. Do not dispose of these products with unsorted household waste. For more information, contact ATEQ. UM-VT66MB-EN ATEQ VT66MB User manual Page 75/81 Creation of a sensor set, 46 Daimler buses, 20 Daimler passenger cars, 12 Daimler trucks, 16 ATEQ VT66MB 10 Index Accessories, 9 All vehicles, 14 Axle, 16 Battery, 70 Certification, 74 Charging, 10 Conformity, 74 Connectors, 8 Contacts, 68 Dimensions, 8 Downloads, 64 FAQ, 68 Frequency, 71 Getting Started, 10 History, 24 Identifier TPMS sensor, 28 tire, 38 Indirect TPMS, 35 Integrity, 41 Integrity level, 39 Key fob, 60 Learn, 30 LF, 71 Licence, 65 New Job, 11 Number of version, 64 serial, 64 OBD Errors, 35 OBD-II, 8, 32 Product content, 9 Programming TPMS sensors, 46 tire data, 42 Radio frequencies, 71 Reading a TPMS sensor, 27 Reading the tire data, 39 Registration, 66 Relearn, 30, 31 auto, 31 manual, 31 RF, 71 RFID, 38 RFID tag, 38 RJ45, 8 Safety, 3 Safety information, 3 Settings, 67 SGTIN96, 38 Spare parts, 36 Standards and references, 4 Support, 63 Technical specifications, 70 TPMS sensor Copy, 49 manual entry, 57 TPMS sensors checking, 26 creation, 46 identifiers, 28 indirect, 35 programming, 46 reading, 26 Reading OBD-II, 54 triggering, 26 Tire Data, 40 UM-VT66MB-EN ATEQ VT66MB User manual Page 76/81 ATEQ VT66MB Tire set, 21, 51 Tire Set, 21 tire tread depth gauge, 21 tire tread depths, 21 Tires summer, 30 winter, 30 Update notes, 65 Updates, 66 USB C, 8 warranty, 72 Wheels single, 17 twinned, 17 WiFi, 10 UM-VT66MB-EN ATEQ VT66MB User manual Page 77/81 ATEQ VT66MB 11 Table of Contents 1 2 Revision of VT66MB tool 2 Safety recommendation 3 2.1 Regarding electromagnetic field emission devices 3 2.2 Safety information 3 2.2.1 Read all the instructions 3 2.2.2 Keep these instructions in a safe place 3 2.2.3 Cleaning 4 2.2.4 Water & Moisture 4 2.2.5 Storage 4 2.2.6 Usage 4 2.3 Standards and references 4 2.4 Warnings 4 3 Description of the VT66MB tool 5 3.1 Overview of the ATEQ VT66MB 5 3.2 Front panel 6 3.3 Back panel 7 3.4 Top edge 8 3.5 Dimensions 8 3.6 Connectors 8 3.7 Function keys 3.8 Icon functions 3.9 Product content 4 Before starting 10 4.1 Charging 10 4.2 Getting Started 4.3 Configuration 8 9 9 10 10 5 Using the VT66MB tool 11 5.1 First things 11 5.2 Which function for which vehicle?
11 UM-VT66MB-EN ATEQ VT66MB User manual Page 78/81 5.4.3.1 Winter tire set/summer tire set 30 ATEQ VT66MB 5.3 New job 11 5.3.1 Daimler passenger cars 12 5.3.2 All vehicles 14 5.3.3 Daimler trucks 5.3.4 Daimler buses 16 19 5.3.5 Tire set 20 5.3.5.1 Adding notes 23 5.3.6 History 24 5.4 Read TPMS 26 5.4.1 Read TPMS procedure 26 5.4.2 Reading a TPMS sensor 27 5.4.3 Settings 30 5.4.3.2 ID (identifier) 30 5.4.3.3 Pressure 30 5.4.3.4 Temperature 30 5.4.3.5 Frequency 30 5.4.3.6 Battery 30 5.4.3.7 Complete page 30 5.4.4 Printing 5.5 Relearn 30 30 5.5.1 Relearn procedure 30 5.5.2 Manual or auto relearn 30 5.5.3 OBD relearn 32 5.5.3.1 OBD errors 35 5.6 Spare parts look-up 35 5.6.1 The spare parts database 36 5.6.2 Daimler vehicles 36 5.5.4 Special case of vehicles fitted with indirect TPMS sensors 35 5.6.3 Vehicles of makes other than Daimler 37 5.7 Tire data 38 UM-VT66MB-EN ATEQ VT66MB User manual Page 79/81 ATEQ VT66MB 5.7.1 Introduction 38 5.7.1.1 What is SGTIN96? 38 5.7.1.2 What is the integrity level? 38 5.7.1.3 Which vehicles?
5.7.2 Reading the tire data 39 39 5.7.3 Programming the tire data 42 5.8 Programming the sensors 45 5.8.1 Programming procedure 46 5.8.2 Creation 46 5.8.3 Copy 49 5.8.4 Copying a tire set 51 5.8.5 Reading TPMS IDs through OBD 54 5.8.6 Manual ID 57 5.9 Special Function 60 5.9.1 Key fob test 60 6 Support 6.1 Updating 63 63 6.1.1 Serial number 64 6.1.2 Version numbers 64 6.1.3 Download status 64 65 65 66 6.1.4 Update notes 6.1.5 Licence renewal 6.1.6 Software update 6.2 Registration 66 6.3 Settings 67 6.4 FAQ 68 6.5 Contacts 69 7 Technical specifications 71 7.1 Device specifications 71 7.2 Radio frequency 72 7.3 Sensor type 72 UM-VT66MB-EN ATEQ VT66MB User manual Page 80/81 8.4 ATEQ VT66MB User guide Limitation of responsibility 73 ATEQ VT66MB 8 Limited hardware warranty 73 8.1 ATEQ Limited Hardware Warranty 73 8.2 Remedies 73 8.3 How to Obtain Warranty 73 8.5 Duration of Implied Warranties 74 8.6 National Statutory Rights 74 8.7 No Other Warranties 74 8.8 Warranty Period 74 9 Declarations of EC/FCC certification 75 9.1 Declaration of EC conformity 75 9.2 Declaration of FCC conformity 75 9.3 Federal Communication Commission Interference Statement 72 9.4 EU Declaration of conformity 74 9.5 Recycling 75 Index 76 10 11 Table of Contents 78 UM-VT66MB-EN ATEQ VT66MB User manual Page 81/81
1 2 3 4 | ID Label/Location Info | ID Label/Location Info | 96.43 KiB | December 18 2020 / December 23 2020 |
Mase} TPMS TOOL Stem aaa beer eects
@ een ert ry sr Rr freee eer oli ee het s Rema peices nett) Pena) te tray ato ees ceed corm othe SM) Dee ee ce re eee rrr DU) Poe ee
1 2 3 4 | Antenna Specification for UHF | Cover Letter(s) | 408.96 KiB | December 18 2020 / December 23 2020 |
QUBE 6010 UHF RFID Antenna Specification 1 Rev.0.2.0 2015-05-19 1. Part Name KSA-921A6010B100B 2. Electrical Specifications Item Center Frequency (= Fc) Operating Frequency Return Loss @ Operating Frequency Typical Specifications Max. 925 921 Min. 917 Fc 13 Fc 15 Polarization R.H.C.P Peak Gain @ Fc (RHCP) Gain @ Reference Antenna Axial Ratio @ Fc Beamwidth (@3dB) Impedance Operating Temperature Weight
-13 80
-30 2.5
-10 100 50 14 Unit MHz MHz dB dBic dB degree g
-15 1.3
+70 Note 1. Operating frequency is defined as frequency range between f3dB_low and f3dB_high. 2 Rev.0.2.0 2015-05-19 3. Dimensions Rev.0.2.0 2015-05-19
- Foot Print 6010 _ 0
. 1 V _ 0 1 0 6 SANGSHIN 6010_V2.0 KSA-921A6010B100B YYWW U.FL or CMP 1.32 1005 Tolerance Unless Otherwise Specified : 0.2 Unit : mm 4. S-parameter Data 4.1 Return Loss (S11) 4.2 Smith Chart (S11) 4 Rev.0.2.0 2015-05-19 4.3 Gain (S21) 5 Rev.0.2.0 2015-05-19 5. Antenna Chamber Data 5.1 E-Plane E - plane Frequency [MHz]
Gain [dBic]
5.2 H-Plane H - plane Frequency [MHz]
Gain [dBic]
891 894 897 900 903 906 909 912 915 918 921 924 927 930 933 936 939 942 945 948 951 891 894 897 900 903 906 909 912 915 918 921 924 927 930 933 936 939 942 945 948 951
-3.94
-3.18
-2.47
-1.97
-0.80 0.25 1.18 1.88 2.33 2.63 2.59 2.24 1.69 1.14 0.54
-0.13
-0.77
-1.15
-1.68
-2.23
-2.87
-3.75
-3.03
-2.26
-1.88
-0.75 0.31 1.26 1.97 2.46 2.79 2.68 2.32 1.76 1.19 0.59
-0.06
-0.73
-1.11
-1.59
-2.14
-2.74 6 Rev.0.2.0 2015-05-19 5.3 Gain vs Frequency 6. Measurement Condition 6.1 S-parameter Measurement 7 Rev.0.2.0 2015-05-19 6.2 Gain Measurement 8.Revision Revision No. 0.2.0 Originator SM Yun Description of Change Date of Changes Full specification 19-May-15 8 Rev.0.2.0 2015-05-19 9.Address Information PHYCHIPS Inc.
#104, 187 Techno 2-ro Yuseong-gu, Daejeon, Korea
(Yongsan-dong. Migun Technoworld 2), 34025 Web site : http://www.phychips.com E-mail : sales@phychips.com TEL : +82-42-864-2402 FAX : +82-42-864-2403 Disclaimer: PHYCHIPS reserves the right to make changes to the information in this document without prior otice. The purchase of PHYCHIPS products does not convey any license under patent rights owned by PHYCHIPS or others. PHYCHIPS does not assume any responsibility for the use of this product. It is the customers sponsibility to make sure that the system complies with regulations. 2018 PHYCHIPS Inc. All rights reserved. The reproduction of this document is NOT allowed without approval of PHYCHIPS Inc. 9 Rev.0.2.0 2015-05-19
1 2 3 4 | Antenna Specification for WLAN 2.4G 5G | Cover Letter(s) | 4.35 MiB | December 18 2020 / December 23 2020 |
ARISTOTLE ENTERPRISES ROHS COMPLIANCE
Customer
Part No.
Description
Drawing No.
Drawing No.
RFA-25-AP532-70B-45 DB, L=45mm,IPEX RFA-25-AP532-70B-45 3422242000290M CBL,ANTENNA,ARISTOTLE,RFA-25-AP532-70B-45() 45mm,IPEX1,24*18*0.6mm,FOR GT78V WIFI/BT(AP532-BT_V1) CHECK BY APPROVE BY
TEST BY
TEST BY CHECK BY APPROVE BY
: 63 8
:02-2225-8209
:02-2225-7523 QP-0603-F02 A Efficiency Avg. Gain Peak Gain XY-plane YZ-plane ZX-plane XY-plane YZ-plane ZX-plane V+H Avg. Gain V+H Peak Gain Frequency
(MHz) 2400.00 2450.00 2500.00 5150.00 5350.00 5475.00 5600.00 5725.00 5750.00 5825.00 5875.00 41.46 43.31 41.98 65.04 69.98 67.62 60.81 66.79 69.16 70.98 71.37 3D
-3.82
-3.63
-3.77
-1.87
-1.55
-1.70
-2.16
-1.75
-1.60
-1.49
-1.46 3.14 3.50 3.43 5.63 5.72 5.82 6.20 6.48 6.68 7.18 7.22
-4.63
-4.39
-4.65
-6.31
-5.96
-5.89
-6.09
-5.70
-5.50
-4.95
-4.67
-5.91
-6.10
-6.21
-2.79
-2.45
-2.43
-2.83
-2.42
-2.13
-1.92
-2.06
-2.15
-2.01
-2.12
-2.39
-1.94
-2.16
-2.69
-2.37
-2.23
-2.19
-2.38 0.12 0.82 0.59
-1.31
-1.08
-0.87
-0.50 0.80 1.23 2.05 2.48
-1.75
-1.76
-1.46 4.30 4.65 5.27 4.76 4.73 4.90 5.19 5.10 3.06 2.66 2.57 4.91 5.23 5.49 4.88 5.07 5.16 5.38 5.36 XY Plane (+X = 0, +Y = +90) / Elevation = 90 ZX Plane (+Z = 0, +X = +90) / Azimuth = 0 90 5 dB
-5 dB
-15 dB
-25 dB 2400 MHz 2450 MHz 2500 MHz 180 0 180 0 90 5 dB
-5 dB
-15 dB
-25 dB
-90 YZ Plane (+Z = 0, +Y = +90) / Azimuth = 90 5 dB
-5 dB
-15 dB
-25 dB 180 0
-90 90
-90 XY Plane (+X = 0, +Y = +90) / Elevation = 90 ZX Plane (+Z = 0, +X = +90) / Azimuth = 0 90 90 5 dB
-5 dB
-15 dB
-25 dB 180 0 180 0 5 dB
-5 dB
-15 dB
-25 dB 5150 MHz 5350 MHz 5475 MHz 5600 MHz 5725 MHz 5750 MHz 5825 MHz 5875 MHz
-90 YZ Plane (+Z = 0, +Y = +90) / Azimuth = 90 5 dB
-5 dB
-15 dB
-25 dB 180 0
-90 90
-90 Glass cloth base epoxy resin flame retardant copper clad laminate NAN YA PLASTICS CORPORATION ELECTRONIC MATERIALS DIVISION. COPPER CLAD LAMINATE DEPARTMENT NO. 201. TUNG HWA N. ROAD, TAIPEI, TAIWAN. NP-140TL
Multi-functional epoxy renders the material outstanding
High luminance of epoxy contrast with copper for laser type A.O.I. heat resistance, better dimensional stability, and through-
UV solder mask may be applied simultaneously in order to hole reliability that benefit the performance of high layer increase yields.
HTE copper foil applied to prevent corner cracking.
IPC-4101B specification is applicable.
FEATURES count multilayer boards.
PERFORMANCE LIST Characteristics Unit Conditioning Typical Values SPEC Test Method Volume resistivity M-cm C-96/35/90 Arc resistance SEC D-48/50+D-0.5/23 Surface resistivity Permittivity 1 MHZ Permittivity 1 GHZ Loss Tangent 1 MHZ Loss Tangent 1 GHZ Dielectric breakdown Moisture absorption Flammability Peel strength 1 oz M
KV
Ib/in Glass transition temp Dimensional stability X-Y axis Coefficient of thermal expansion Z-axis before Tg Z-axis after Tg
ppm/
ppm/
C-96/35/90 C-24/23/50 C-24/23/50 C-24/23/50 C-24/23/50 D-48/50 D-24/23 floating DSC E 4/105 TMA TMA Thermal stress SEC 288 solder dipping 5.0 x109 5.0 x107 4.2-4.4 3.8-4.0 0.015-0.020 0.012-0.014 120 60 0.20-0.30 10-14 90 140 5 50-70 250-350 C-24/23/50+E-24/125 94V0 288 x10 solder 106 104 5.4 0.035
60 40 0.35 94V0 6 10 N/A 2.5.17 2.5.17 2.5.5.9 2.5.5.9 2.5.5.9 2.5.5.9 2.5.1 2.5.6 2.6.2.1 UL94 2.4.8 2.4.13.1 2.4.25 2.4.39 0.01-0.03 0.05 N/A 2.4.24 NOTE:
samples of .020 1/1. Test method per IPC-TM-650 Data shown are nominal values for reference only. The average value in the table refers to 3
UV TRANSMISSION CURVE OF 0.2mm CCL
PRODUCT SIZE & THICKNESS THICKNESS COPPER CLADDING SIZE INCH mm 48.8 x 36.6 1240 x 0930 THICKNESS TOLERANCE 48.8 x 40.5 1240 x 1030 CLASS C/M 48.8 x 42.5 1240 x 1080
Keeping the core and prepreg in the same grain direction is crucial to ensure the flatness Grain direction is shown on the Certificate of Conformance INCH(mm) 0.004 (0.1) to 0.047(1.2) OZ (m) 0.5 (17) 1.0 (35) 2.0 (70) of multilayer boards.
CERTIFICATION UL
UL File No. : E98983 4
CONSTRUCTION:
THICKNESS mil mm CONSTRUCTION THICKNESS 0.13sp 0.08 0.10 0.11 0.13 0.15 0.16 0.21 0.26 0.30 0.30sp 0.35 0.38 3 4 4 5 5 6 6 8 10 12 12 14 15 2112 1080 2116 1080 2116 1506 2112 7628 2116 2116 1506 7628 7628 1 ply 2 plies 1 ply 2 plies 1 ply 1 ply 2 plies 1 ply 2 plies 3 plies 2 plies 2 plies 2 plies mm 0.45 0.46 0.50 0.53 0.60 0.77 0.8 0.9 1.0 1.1 1.2 mil 18 18 20 21 24 31 32 36 39 43 47 CONSTRUCTION 7628 x 2 + 1080 x 1 7667 2 plies 7628 3 plies 7628 3 plies 7628 3 plies 7628 4 plies 7628 4 plies 7628 5 plies 7628 5 plies 7628 6 plies 7628 6 plies
*1.2,1.1,1.0,0.9,0.77 mm, THICKNESS INCLUDES CLADDING. ALL OTHERS EXCLUDE CLADDING. 5 SPECIFICATION FOR APPROVAL DOCUMENT:
A3132TS001 STYLE COAXIAL CABLE 105 30V SIZE:
32AWG1C BRAID TD RECOGNIZED:
UL 1979 MEET VW-1 WONDERFUL HI-TECH CO.,LTD. OFFICE72WU KONG 6TH ROAD, WU KU IND. DISTRICT TAIPEI HSIEN,TAIWAN TEL(02)22988033 FAX(02)22988031-2 FACTORY17 PEI YUAN ROAD, CHUNG-LI IND. PARK TAIWAN, R.O.C. TEL(03)4527777 FAX(03)4517214 Insulation 0.70 0.03 WONDERFUL HI-TECH CO., LTD. SPECIFICATION DOCUMENT NO :
A3132TS001 ESTABLISHED DATE:
Mar/16/2005 STYLE 105 30V UL 1979 SIZE 32AWG STANDARD :
Conductor Braid Jacket Marking Drawing Size AWG
Material Conductors No.
mm Conductors Size O.D. mm Average Thickness mm Diameter mm Material
Color
Material
Construction mm Coverage
Average Thickness mm Diameter mm Material
Color
Non Silver Cover Copper 32 7 0.085 0.26 0.22 FEP Clear 89.4 0.12 FEP Tinned Copper 16 / 4 / 0.050 1.13 0.05 According to customer AK001/210X297/1.0 PAGE : 1 EDITION : 1.4 MAKER : CONFIRM : APPROVAL :
WONDERFUL HI-TECH CO., LTD. SPECIFICATION Electrical & Physical Properties Item 32AWG Rating Temp Voltage 105 30V Conductor Resistance 497 OHM/KM/20 MAX. Insulation Resistance 3000 MEGA OHM-KM MIN. Dielectric Strength AC 1000 V/Minute Spark Test 2 KV Insulation Jacket Unaged Aged Unaged Aged Tensile Strength 2500 PSI MIN.( 1.76 Kg / ) Elongation 200% MIN. Tensile Strength UNAGED MIN. 75%(168HRS232) Elongation UNAGED MIN. 75%(168HRS232) Tensile Strength 2500 PSI MIN.( 1.76 Kg / ) Elongation 200% MIN. Tensile Strength UNAGED MIN.75%(168HRS232) Elongation UNAGED MIN.75%(168HRS232) Nom. Impedance Nom. Capacitance 50 3 Ohms 96 3 pF/m Nom. Vel. of Prop. 69%
Storage Temperature
-40~+80 VSWR Test (0 6 GHZ) Flame Test Max 1.3 VW-1 OK Attenuation
(dB/1m) 2.0GHZ 2.4GHZ 2.5GHZ 5.0GHZ 6.0 GHZ 2.90 3.20 3.28 5.05 5.40 AK001/210X297/1.0 PAGE : 2 EDITION : 1.4 MAKER : CONFIRM : APPROVAL :
333MMM Double Coated Tissue Tapes 9888T Temporary Technical Data Product Description:
May, 2002 Product 9888T double coated tissue tape features a tissue carrier for dimensional stability and improved handling with ease of die cutting and laminating. Construction:
Product Number Adhesive1/
Color/
Tape Thickness Carrier Liner Color, Type, Print Liner Caliper 9888T Translucent, 0.0059 (0.150mm) Tissue translucent in color White, PE2 polycoated paper, 3M logo print in red color 0.0059
(0.150mm) Note 1: Pressure Sensitive Acrylic Adhesive provides excellent initial tack and adhesion to a wide variety surface including many low surface energy plastics. Note 2: PE (Polyethylene) Feature 1. 9888T feature a medium-soft acrylic pressure sensitive adhesive system. The key characteristics of this adhesive include a combination of high initial adhesion and good shear and holding power to a wide variety of materials, including many plastics. 2. 9888T feature controlled adhesive flow into open cell foam and controlled caliper for bond to application surface. 3. For foam laminating, it provides excellent foam stability to reduce stretching and allows to more precise alignment during application. Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Product Number Adhesion to stainless steel ASTM D3330 180 degree, 2 mil Al foil at 22C, 50%RH Adhesion to ABS ASTM D3330 180 degree, 2 mil Al foil at 22C, 50%RH Adhesion to PC ASTM D3330 180 degree, 2 mil Al foil at 22C, 50%RH Adhesion to PP ASTM D3330 180 degree, 2 mil Al foil at 22C, 50%RH 15 minute RT 72 Hour RT 15 minute RT 72 Hour RT 15 minute RT 72 Hour RT 20 minute RT 72 Hour RT Shear strength ASTM D3654 modified 0.5 inch2 sample size at 22C 9888T g/25.4m 2940 3180 2210 2440 2560 2670 1900 2190 1000 grams 10000 mins Relative High temperature Operating Ranges Long Term (days, weeks) Short Term (minutes, hours) 80C 120C Shelf Life relative humidity 12 months from date of receipt by customer when stored in original carton at 22 C and 50%
Application Techniques:
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane. Note: Carefully read and follow the manufacturers precautions and directions for use when working with solvents. Ideal tape application temperature range is 70 F to 100 F (21 C to 38 C). Initial tape application to surfaces at temperatures below 50 F (10 C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. General Information Application Ideas Tape 9888T has a tissue carrier, which can add dimensional stability to foams and other substrates. The carrier also provides easier handling during slitting and die-cutting. 9888T tapes are specially formulated for many indoor high performance purpose mounting and joining applications, including bonding to Polyethylene, Polypropylene and many other Plastics, where moderate temperature and shear performance are required. 9888T tapes are formulated for more demanding indoor and moderate outdoor high performance mounting and joining application. Application ideas for these tapes include
- Lens attachment for mobile phone
- Wire and Cable Clips
- Appliance, Case for display and Electronics Equipment Trim
Interior under sheet for car
- Paper splicing
- Foam, Gasket attachment in mobile phones and pagers.
- Plastics Hooks, Racks and Dispensers
- Sign, Nameplates and Plaques
- Appliques Important Notice Limitation of Remedies and Liability 3M MAKES NO WARRANTES, EXPRESS OR IMPLED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for users method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the users knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the users method of application. If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3MS OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability. ZHI YAN ELECTRONICS CO., LTD 11F.-8, No.109, Sec1, Jhongshan Rd, Sinjhuang City, Taipei County 242, Taiwan (R.O.C) TEL(886)2-8522-7261 FAX(886)2-8522-7265 PRODUCT SPECIFICATION 01 . JAN . 2006 1st Edition This specification covers the requirements for Flexible Polyolefin 1. Scope Tubing used for Vlotage 600V Temperature 100 rating 2. STANDARD SIZE Nominal Size (mm) Inside Wall Size as supplies (mm) Standard Length Diameter Thickness
(M) 300 300 300 300 300 300 300 300 300 100 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.2 0.05 0.6 0.10 UNIT kg/mm2
KV STANDARD SPECIFICATIONS 20"/min 200 x 3min
-CM Min. 1.00 Min. 200 Max. 15 0.94 Max. 0.3 Min.1014 Min. 2.5 2.4 2.5 2.7 2.9 3.0 3.1 3.3 3.4 3.6 6.0 2.4 0.1 2.5 0.1 2.7 0.1 2.9 0.1 3.0 0.1 3.1 0.1 3.3 0.1 3.4 0.1 3.6 0.1 6.0 0.2 3. Physical / Electrical Insulation ITEM Tensile Strength Elongation Longitude Change Specific gravity Water absorption Volume Resistivity Dielectric strength 4. MARKINGNON
. 5.PACKING This standard length given in the Construction table. Other length are avalible upon special need not to be danaged during transporting and storage. ZHIYAN ELECTRONICS CO., LTD 1. SCOPE THIS SPECIFICATION COVERS TUBE LP-C . 2. FEATURE LP-C IS NOT AN IRRADIATED CROSS-LINKED , COMMERCIAL GRADE VERY FLEXIBLE POLYOLEFIN TUBING . 3. COLOR STANDARDS COLORS : CLEAR . 4. STANDARD SIZES STANDARD SIZES SHALL BE SPECIFIED IN TABLE 1 . 5. TEST METHOD 1.) INSIDE DIAMETER INSIDE DIAMETER SHALL BE MEASURED BY A METAL GAGE ROD OR A METAL TAPE R GAGE WHICH HAS INTERVAL OR GRADUATION . IN CASE OF USING A GAGE ROD : READ THE VALUE OF THE MAXIMUM GAGE ROD WHICH SHALL PASS FREELY INTO THE TUBING WITHOUT EXPANDING THE WALL OF TUBING . IN CASE OF USING A TAPER GAGE : READ THE VALUE ON THE GAGE WHEN THE TUBING ISN'T EXPANDED BY INSERTION AND THERE IS NO VISIBLE SPACE BETWEEN THE END OF TUBING AND THE TAPER GAGE . 2.) WALL THICKNESS WALL THICKNESS SHALL BE MEASURED BY A PIN-DIALGAGE OR A MICROMETER AT SEVERAL POINTS . 1 ZHIYAN ELECTRONICS CO., LTD TABLE 1. STANDARD SIZE AS SUPPLIED (MM) STANDARDS INSIDE DIAMETER NOM. WALL LENGTH THICKNESS (W) RELL(M) TRADE SIZE
(METRIC) 2.40*0.2 2.50*0.2 2.70*0.2 2.90*0.2 3.00*0.2 3.10*0.2 3.30*0.2 3.40*0.2 3.60*0.2 6.00*0.6 D 2.400.1 2.500.1 2.700.1 2.900.1 3.000.1 3.100.1 3.300.1 3.400.1 3.600.1 6.000.2 0.200.05 0.200.05 0.200.05 0.200.05 0.200.05 0.200.05 0.200.05 0.200.05 0.200.05 0.600.10 W 300 300 300 300 300 300 300 300 300 100 RoHS REPORT INDEX 1. 2. PCB IPEX 2-1 HOUSING 2-2 CONTACT 2-3 GROUND CONTACT 2-4 PLATING Cable 3. 3-1 3-2 FEP 3-3 4. 5. IPEX NAME DAI-ICHI SEIKO CO., LTD. DAI-ICHI SEIKO CO., LTD. DAI-ICHI SEIKO CO., LTD. DAI-ICHI SEIKO CO., LTD. WONDERFUL HI-TECH CO., LTD. WONDERFUL HI-TECH CO., LTD. RoHS report CE/2017/C0524 CE/2017/82435A CE/2017/C3496 CE/2017/C3495 CE/2017/C3499 TWNC00660407 TWNC00660409 SHAEC1716150902 CE/2017/11010 ECL01J081203002E
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 1 of 39
*CE/2017/C0524*
(The following sample(s) was/were submitted and identified by/on behalf of the applicant as)
(Sample Submitted By)
(Sample Description)
(NAN YA PLASTICS CORPORATION) LAMINATE (UL E98983)
(Style/Item No.)
/(Buyer/Order No.)
(Sample Receiving Date) NP-140R/NP-140TL 7A10213 2017/12/04
(Testing Period) 2017/12/04 TO 2017/12/13
(Test Requested)
(1) RoHS2011/65/EU Annex II(EU) 2015/863, DBP, BBP, DEHP, DIBP. (As specified by client, with reference to RoHS 2011/65/EU Annex II and amending Directive (EU) 2015/863 to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs, DBP, BBP, DEHP, DIBP contents in the submitted sample(s).)
(2)
. (Please refer to next pages for the other item(s).)
(Test Results)
(Please refer to following pages).
(Conclusion)
(1)
, DBP, BBP, DEHP, DIBP RoHS(EU) 2015/863. (Based on the performed tests on submitted sample(s), the test results of Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs, DBP, BBP, DEHP, DIBP comply with the limits as set by RoHS and amending Directive (EU) 2015/863.) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 2 of 39
*CE/2017/C0524*
(Test Results)
(PART NAME)No.1
(COPPER COLORED SHEET)
(Test Items)
(Method)
/ Cadmium (Cd)
/ Lead (Pb)
/ Mercury (Hg)
(Unit) mg/kg mg/kg mg/kg
(MDL)
(Result)
(Limit) No.1 n.d. 100 4.47 1000 n.d. 1000 n.d. n.d. n.d.
IEC 62321-5 (2013)
. / With reference to IEC 62321-5 (2013) and performed by ICP-AES. IEC 62321-4 (2013)
. / With reference to IEC 62321-4 (2013) and performed by ICP-AES. IEC 62321-7-2 (2017)UV-VIS
. / With reference to IEC 62321-7-2
(2017) and performed by UV-VIS. US EPA 3052 (1996)
. / With reference to US EPA 3052 (1996). Analysis was performed by ICP-AES. US EPA 3052 (1996)
. / With reference to US EPA 3052 (1996). Analysis was performed by ICP-AES.***
IEC 62321 (2008)/
. / With reference to IEC 62321
(2008). Analysis was performed by GC/MS. 2 2 2 8 2
5
/ Beryllium (Be) mg/kg
/ Beryllium oxide (BeO)***
mg/kg
Hexabromocyclododecane (HBCDD) and all major diastereoisomers identified (-
HBCDD, - HBCDD, - HBCDD) (CAS No.:
25637-99-4 and 3194-55-6 (134237-51-7, 134237-50-6, 134237-52-8)) mg/kg
/ Hexavalent Chromium Cr(VI) mg/kg n.d. 1000 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 3 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
/ PVC
. / Analysis was performed by FTIR and FLAME Test.
/ Arsenic (As) (2) mg/kg 50 n.d.
(MDL)
(Result) No.1
Negative
(Limit)
/ Diarsenic pentaoxide***
(CAS No.: 1303-28-2)
/ Diarsenic trioxide***
(CAS No.: 1327-53-3)
/ Boron (B) (2)
/ Boric acid*** (CAS No.: 10043-
35-3; 11113-50-1)
/ Disodium tetraborate, anhydrous*** (CAS No.: 1303-96-4, 1330-43-4, 12179-04-3)
/ Tetraboron disodium heptaoxide, hydrate (CAS No.: 12267-
73-1) (2)
/ Tributyl Tin (TBT)
/ Triphenyl Tin (TphT)
/ Dibutyl Tin (DBT)
/ Dioctyl Tin (DOT) SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES. SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES.***
SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES. SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES.***
SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES. ISO 17353 (2004)/
. / With reference to ISO 17353 (2004). Analysis was performed by GC/FPD. mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 50 n.d.
0.03 0.03 0.03 0.03 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 4 of 39
*CE/2017/C0524*
(Test Items)
/ Perfluorooctane sulfonates
(PFOS-Acid, Metal Salt, Amide)
/ PFOA (CAS No.: 335-67-1)
(Unit) mg/kg mg/kg mg/kg 2-[2--3',5'---]-
(320) / 2-benzotriazol-2-yl-
4,6-di-tert-butylphenol (UV-320) (CAS No.:
3846-71-7)
/ Cobalt dichloride (CAS No.:
7646-79-9) mg/kg
/ Polychlorinated Biphenyls
(PCBs) (CAS No.: 1336-36-3)
/ Polychlorinated Naphthalene
(PCNs)
/ Polychlorinated Terphenyls (PCTs)
/ Alkanes, C10-13, chloro
(Short Chain Chlorinated Paraffins)
(CAS No.: 85535-84-8)
(2-) / Bis(2-methoxyethyl) ether (CAS No.: 111-96-6) N,N- / N,N-dimethylacetamide
(DMAC) (CAS No.: 127-19-5)
/ Ethylene glycol dimethyl ether (EGDME) (CAS No.: 110-71-4) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg
(Method)
(MDL)
(Result)
(Limit) US EPA 3550C (2007)/
. / With reference to US EPA 3550C (2007). Analysis was performed by LC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C (2007). Analysis was performed by GC/MS. SGSRSTS-EE-SVHC-007
. / SGS In-House method-RSTS-EE-SVHC-007. Analyzed by ICP-AES. US EPA 3550C (2007)/
. / With reference to US EPA 3550C (2007). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C (2007). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. 10 10 5 50 n.d. 0.5 n.d. 5 n.d. 0.5 n.d. 100 n.d. 10 10 10 n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 5 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit) 1000
/ Sum of PBBs
/ Monobromobiphenyl
/ Dibromobiphenyl
/ Tribromobiphenyl
/ Tetrabromobiphenyl
/ Pentabromobiphenyl
/ Hexabromobiphenyl
/ Heptabromobiphenyl
/ Octabromobiphenyl
/ Nonabromobiphenyl
/ Decabromobiphenyl
/ Sum of PBDEs
/ Monobromodiphenyl ether
/ Dibromodiphenyl ether
/ Tribromodiphenyl ether
/ Tetrabromodiphenyl ether
/ Pentabromodiphenyl ether
/ Hexabromodiphenyl ether
/ Heptabromodiphenyl ether
/ Octabromodiphenyl ether
/ Nonabromodiphenyl ether
/ Decabromodiphenyl ether
/ Dimethyl Fumarate (CAS No.: 624-49-7)
(2-) / Tris (2-
chloroethyl) phosphate (TCEP) (CAS No.: 115-96-8) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 0.1
IEC 62321-6 (2015)/
. / With reference to IEC 62321-6 (2015) and performed by GC/MS. 1000 US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. 5 n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 6 of 39
*CE/2017/C0524*
(Test Items)
(1--2-) / Tris(1-chloro-
2-propyl) phosphate (TCPP) (CAS No.:
13674-84-5)
(1,3-) / Tris(1,3-
dichloro-2-propyl)phosphate (TDCPP)
(CAS No.: 13674-87-8)
() / Trixylyl phosphate
(TXP) (CAS No.: 25155-23-1)
/ / 4-(1,1,3,3-
tetramethylbutyl) phenol, (4-tert-
Octylphenol) (CAS No.: 140-66-9)
/ Asbestos
/ Actinolite
(CAS No.: 77536-66-4)
() / Amosite
(CAS No.: 12172-73-5)
/ Anthophyllite
(CAS No.: 77536-67-5)
() / Chrysotile
(CAS No.: 12001-29-5)
/ Crocidolite
(CAS No.: 12001-28-4)
/ Tremolite
(CAS No.: 77536-68-6)
(Unit) mg/kg mg/kg mg/kg mg/kg
(Method)
(MDL)
(Result)
(Limit) US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by LC/MS. No.1 n.d. n.d. 25 n.d. 10 n.d. EPA 600/R-93/116 (1993) /
(SM), (DS-PLM)X
(XRD) / With reference to EPA 600/R-93/116 (1993). Analysis was performed by Stereo Microscope (SM), Dispersion Staining Polarized Light Microscope (DS-
PLM) and X-ray Diffraction Spectrometer
(XRD). 5 5
Negative Negative Negative Negative Negative Negative
/ Perchlorate (CAS No.:
14797-73-0) mg/kg
. / Analysis was performed by IC. 0.006 n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 7 of 39
*CE/2017/C0524*
(Method)
(MDL)
(Result)
(Limit) 4): 2- / 2-NAPHTHYLAMINE (CAS No.:
91-59-8) mg/kg
(Test Items)
(AZO) 1): 4- / 4-AMINODIPHENYL (CAS No.: 92-67-1) 2): / BENZIDINE (CAS No.: 92-
87-5) 3): 4- / 4-CHLORO-O-
TOLUIDINE (CAS No.: 95-69-2) 5): / O-
AMINOAZOTOLUENE (CAS No.: 97-56-3) 6): / 2-AMINO-4-
NITROTOLUENE (CAS No.: 99-55-8) 7): / P-CHLOROANILINE (CAS No.: 106-47-8) 8): 4-- / 2,4-
DIAMINOANISOLE (CAS No.: 615-05-4) 9): 4,4'- / 4,4'-
DIAMINODIPHENYLMETHANE (CAS No.: 101-
77-9) 10): 3,3'- / 3,3'-
DICHLOROBENZIDINE (CAS No.: 91-94-1)
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. 3 3 3 3 3 3 3 3 3 3 No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 8 of 39
*CE/2017/C0524*
(Method)
(MDL)
(Result)
(Limit)
(Test Items) 11): 3,3'- / 3,3'-
DIMETHOXYBENZIDINE (CAS No.: 119-90-4) 12): 3,3'- / 3,3'-
DIMETHYLBENZIDINE (CAS No.: 119-93-7) 13): 3,3'--4,4'- /
3,3'-DIMETHYL-4,4'-DIAMINODIPHENYLMETHANE
(CAS No.: 838-88-0) 14): 2--5- / P-CRESIDINE
(2-METHOXY-5-METHYLANILINE) (CAS No.:
120-71-8) 15): 4,4'- () / 4,4'-
METHYLENE-BIS- (2-CHLOROANILINE) (CAS No.: 101-14-4) 16): 4,4'- / 4,4'-
OXYDIANILINE (CAS No.: 101-80-4) 17): 4,4'- / 4,4'-
THIODIANILINE (CAS No.: 139-65-1) 18): / O-TOLUIDINE (CAS No.:
95-53-4) 19): 2,4- / 2,4-
TOLUYLENEDIAMINE (CAS No.: 95-80-7) 20): 2,4,5- / 2,4,5-
TRIMETHYLANILINE (CAS No.: 137-17-7)
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. 3 3 3 3 3 3 3 3 3 3 No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 9 of 39
*CE/2017/C0524*
(Method)
(MDL)
(Result)
(Limit)
(Test Items) 21): / O-ANISIDINE (CAS No.: 90-04-0) 22): / 4-AMINOAZOBENZENE
(CAS No.: 60-09-3) 23): 2,4- / 2,4-XYLIDINE
(CAS No.: 95-68-1) 24): 2,6- / 2,6-XYLIDINE
(CAS No.: 87-62-7)
/ HFCs (Hydrofluorocarbon)
(HFC)-23 (CHF3) (CAS No.:
75-46-7)
(HFC)-32 (CH2F2) (CAS No.:
75-10-5)
(HFC)-41 (CH3F) (CAS No.:
593-53-3)
(HFC)-43-10mee (C5H2F10)
(HFC)-125 (C2HF5)
(HFC)-134 (C2H2F4)
(HFC)-134a (CH2FCF3) (CAS No.: 811-97-2)
(HFC)-143 (CH3F3)
(HFC)-143a (CH3F3)
(HFC)-152a (C2H4F2) (CAS No.: 75-37-6)
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. LFGB 82.02-2 (2013)/
. / With reference to LFGB 82.02-2
(2013). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
3 3 3 3 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 10 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit)
(HFC)-227ea (C3HF7) (CAS No.: 431-89-0)
(HFC)-236fa (C3H2F6)
(HFC)-236ea (C3H2F6) (CAS No.: 431-63-0)
(HFC)-245ca (C3H3F5)
(HFC)-245fa (C3H3F5)
(HFC)-365mfc (C4H5F5)
/ PFCs (Perfluorocarbon)
/ F14 (CAS No.: 75-73-0)
/ Fluorocarbon 116 (CAS No.:
76-16-4)
/ Freon 218 (CAS No.: 76-19-
7)
/ Decafluorobutane (CAS No.:
355-25-9)
/ Freon C318 (CAS No.: 115-
25-3) mg/kg
-1- / Perfluor-1-butene (CAS No.: 357-26-6)
/ perfluorisobutene (CAS No.: 382-21-8) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. 1 1 1 1 1 1 1 1 1 1 1 1 1 No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 11 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit) 1,4- / 1,4-
dihydrooctafluorobutane (CAS No.: 377-36-6) mg/kg 2- / nonafluor-2-
(trifluoromethyl)butane (CAS No.: 594-91-2) mg/kg
/ perfluoro-n-pentane (CAS No.: 678-26-2) 2- / 2-perfluoromethylpentane
(CAS No.: 355-04-4) mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS.
/ perfluorohexane (CAS No.:
355-42-0)
/ CFCs
(Chlorofluorocarbons) Group I
(Chlorofluorocarbon)-11
(CAS No.: 75-69-4)
(Chlorofluorocarbon)-12
(CAS No.: 75-71-8)
(Chlorofluorocarbon)-113
(CAS No.: 76-13-1)
(Chlorofluorocarbon)-114
(CAS No.: 76-14-2)
(Chlorofluorocarbon)-115
(CAS No.: 76-15-3) mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 12 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit) Group III
(Chlorofluorocarbon)-13
(CAS No.: 75-72-9)
(Chlorofluorocarbon)-111
(CAS No.: 354-56-3)
(Chlorofluorocarbon)-112
(CAS No.: 76-12-0)
(Chlorofluorocarbon)-211
(CAS No.: 422-78-6)
(Chlorofluorocarbon)-212
(CAS No.: 3182-26-1)
(Chlorofluorocarbon)-213
(CAS No.: 2354-06-5)
(Chlorofluorocarbon)-214
(CAS No.: 29255-31-0)
(Chlorofluorocarbon)-215
(CAS No.: 4259-43-2)
(Chlorofluorocarbon)-216
(CAS No.: 661-97-2)
(Chlorofluorocarbon)-217
(CAS No.: 422-86-6)
/ HCFCs
(Hydrochlorofluorocarbons)
(HCFC)-21 (CAS No.: 75-
43-4)
(HCFC)-22 (CAS No.: 75-
45-6) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 13 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit)
(HCFC)-31 (CAS No.: 593-
70-4)
(HCFC)-121 (CAS No.: 354-
14-3)
(HCFC)-122 (CAS No.: 354-
21-2)
(HCFC)-123 (CAS No.: 306-
83-2)
(HCFC)-124 (CAS No.:
2837-89-0)
(HCFC)-131 (CAS No.: 359-
28-4)
(HCFC)-132b (CAS No.:
1649-08-7)
(HCFC)-133a (CAS No.: 75-
88-7)
(HCFC)-141b (CAS No.:
1717-00-6)
(HCFC)-142b (CAS No.: 75-
68-3)
(HCFC)-221 (CAS No.: 422-
26-4)
(HCFC)-222 (CAS No.: 422-
49-1)
(HCFC)-223 (CAS No.: 422-
52-6)
(HCFC)-224 (CAS No.: 422-
54-8)
(HCFC)-225ca (CAS No.:
422-56-0) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 14 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit)
(HCFC)-225cb (CAS No.:
507-55-1)
(HCFC)-226 (CAS No.: 431-
87-8)
(HCFC)-231 (CAS No.: 421-
94-3)
(HCFC)-232 (CAS No.: 460-
89-9)
(HCFC)-233 (CAS No.:
7125-84-0)
(HCFC)-234 (CAS No.: 425-
94-5)
(HCFC)-235 (CAS No.: 460-
92-4)
(HCFC)-241 (CAS No.: 666-
27-3)
(HCFC)-242 (CAS No.: 460-
63-9)
(HCFC)-243 (CAS No.: 460-
69-5)
(HCFC)-244
(HCFC)-251 (CAS No.: 421-
41-0)
(HCFC)-252 (CAS No.: 819-
00-1)
(HCFC)-253 (CAS No.: 460-
35-5)
(HCFC)-261 (CAS No.: 420-
97-3) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 15 of 39
*CE/2017/C0524*
(Method)
(MDL)
(Result)
(Limit)
(Test Items)
(HCFC)-262 (CAS No.: 421-
02-03)
(HCFC)-271 (CAS No.: 430-
55-7)
(Halons)
(Halon)-1211 (CAS No.: 353-59-3)
(Halon)-1301 (CAS No.: 75-63-8)
(Halon)-2402 (CAS No.: 124-73-2)
/ Bromomethane (CAS No.: 74-83-
9)
/ HBFCs
(Hydrobromofluorocarbons)
(HBFC)-21B2
(CHFBr2) (CAS No.: 1868-53-7)
(HBFC)-22B1
(CHF2Br) (CAS No.: 1511-62-2)
(HBFC)-31B1
(CH2FBr) (CAS No.: 373-52-4)
(HBFC)-121B4
(C2HFBr4)
(HBFC)-122B3
(C2HF2Br3)
(HBFC)-123B2
(C2HF3Br2)
(HBFC)-124B1
(C2HF4Br)
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 16 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit)
(HBFC)-131B3
(C2H2FBr3)
(HBFC)-132B2
(C2H2F2Br2)
(HBFC)-133B1
(C2H2F3Br)
(HBFC)-141B2
(C2H3FBr2)
(HBFC)-142B1
(C2H3F2Br)
(HBFC)-151B1
(C2H4FBr)
(HBFC)-221B6
(C3HFBr6)
(HBFC)-222B5
(C3HF2Br5)
(HBFC)-223B4
(C3HF3Br4)
(HBFC)-224B3
(C3HF4Br3)
(HBFC)-225B2
(C3HF5Br2)
(HBFC)-226B1
(C3HF6Br)
(HBFC)-231B5
(C3H2FBr5)
(HBFC)-232B4
(C3H2F2Br4) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 17 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit)
(HBFC)-233B3
(C3H2F3Br3)
(HBFC)-234B2
(C3H2F4Br2)
(HBFC)-235B1
(C3H2F5Br)
(HBFC)-241B4
(C3H3FBr4)
(HBFC)-242B3
(C3H3F2Br3)
(HBFC)-243B2
(C3H3F3Br2)
(HBFC)-244B1
(C3H3F4Br)
(HBFC)-251B3
(C3H4FBr3)
(HBFC)-252B2
(C3H4F2Br2)
(HBFC)-253B1
(C3H4F3Br)
(HBFC)-261B2
(C3H5FBr2)
(HBFC)-262B1
(C3H5F2Br)
(HBFC)-271B1
(C3H6FBr) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
1 1 1 1 1 1 1 1 1 1 1 1 1 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 18 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
(Limit) No.1
/ CHCs (Chlorinate hydrocarbon) 1,1,1,2- / 1,1,1,2-
Tetrachloroethane (CAS No.: 630-20-6) mg/kg 1,1,1- / 1,1,1-Trichloroethane
(CAS No.: 71-55-6) mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. 1,1,2,2- / 1,1,2,2-
Tetrachloroethane (CAS No.: 79-34-5) mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. 1,1,2- / 1,1,2-Trichloroethane
(CAS No.: 79-00-5) mg/kg 1,1- / 1,1-Dichloroethane (CAS No.: 75-34-3) mg/kg 1,1- / 1,1-Dichloroethene (CAS No.: 75-35-4) mg/kg 1,1- / 1,1-Dichloropropene
(CAS No.: 563-58-6) 1,2,3- / 1,2,3-
Trichloropropane (CAS No.: 96-18-4) mg/kg mg/kg 1,2- / 1,2-Dichloroethane (CAS No.: 107-06-2) mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. 1 1 1 1 1 1 1 1 1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 19 of 39
*CE/2017/C0524*
(Method)
(MDL)
(Result)
(Limit)
(Test Items) 1,2- / 1,2-Dichloropropane
(CAS No.: 78-87-5) 1,3- / 1,3-Dichloropropane
(CAS No.: 142-28-9) 2,2- / 2,2-Dichloropropane
(CAS No.: 594-20-7)
() / Carbon tetrachloride (CAS No.: 56-23-5)
(Unit) mg/kg mg/kg mg/kg mg/kg
/ Chloroethane (CAS No.: 75-00-
3) mg/kg
/ Chloroform (CAS No.: 67-66-3) mg/kg
/ Chloromethane (CAS No.: 74-
87-3)
-1,2- / cis-1,2-
Dichloroethene (CAS No.: 156-59-2)
-1,3- / cis-1,3-
Dichloropropene (CAS No.: 10061-01-5)
/ Hexachlorobutadiene (CAS No.: 87-68-3) mg/kg mg/kg mg/kg mg/kg US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. 1 1 1 1 1 1 1 1 1 1 No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 20 of 39
*CE/2017/C0524*
(Test Items)
/ Dichloromethane (CAS No.:
75-09-2)
/ Tetrachloroethene (CAS No.:
127-18-4) mg/kg
-1,2- / trans-1,2-
Dichloroethene (CAS No.: 156-60-5)
-1,3- / trans-1,3-
Dichloropropene (CAS No.: 10061-02-6)
/ Trichloroethylene (CAS No.:
79-01-6) mg/kg
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg
/ Sulfur Hexafluoride (SF6)
(CAS No.: 2551-62-4) N-2,4,4-
/ Benzenamine, N-phenyl-, reaction products with styrene and 2,4,4-
trimethylpentene (BNST) (CAS No.: 68921-45-
9) 2-(2'--3',5'---)
(328) / 2-(2H-benzotriazol-2-
yl)-4,6-ditertpentylphenol (UV-328) (CAS No.: 25973-55-1)
(Method)
(MDL)
(Result)
(Limit) US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 5021A (2014)/
. / With reference to US EPA 5021A
(2014). Analysis was performed by GC/MS. US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. 1 1 1 1 1 1 No.1 n.d. n.d. n.d. n.d. n.d. n.d. 100 n.d.
mg/kg US EPA 3550C (2007)/
. / With reference to US EPA 3550C
(2007). Analysis was performed by GC/MS. 5 n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 21 of 39
*CE/2017/C0524*
(Test Items)
/ Dioctyl Tin (DOT)
(Method)
(Result)
(Limit)
(MDL) 230 No.1 n.d.
-(2-) / 2-
ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-
oxa-3,5-dithia-4-stannatetradecanoate
(DOTE)*** (CAS No.: 15571-58-1)
n.d.
/ MonooctylTin (MOT) mg/kg 138 n.d.
(Unit) mg/kg mg/kg SGSRSTS-EE-SVHC-007
/ SGS In-House method-RSTS-EE-SVHC-007. Qualitative by GC/MS. Quantitative by GC/FPD. SGSRSTS-EE-SVHC-007
/ SGS In-House method-RSTS-EE-SVHC-007. Qualitative by GC/MS. Quantitative by GC/FPD.***
SGSRSTS-EE-SVHC-007
/ SGS In-House method-RSTS-EE-SVHC-007. Qualitative by GC/MS. Quantitative by GC/FPD. mg/kg SGSRSTS-EE-SVHC-007
/ SGS In-House method-RSTS-EE-SVHC-007. Qualitative by GC/MS. Quantitative by GC/FPD.***
n.d.
-(2-)
-(2-) /
Reaction mass of 2-ethylhexyl 10-ethyl-4,4-
dioctyl-7-oxo-8-oxa-3,5-dithia-4-
stannatetradecanoate and 2-ethylhexyl 10-
ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-
oxoethyl]thio]-4-octyl-7-oxo-8-oxa-3,5-
dithia-4-stannatetradecanoate (reaction mass of DOTE and MOTE)***
() / 1,2-
Benzenedicarboxylic acid, dihexyl ester, branched and linear (CAS No.: 68515-50-4)
(2-) / DEHP
(Di- (2-ethylhexyl) phthalate) (CAS No.: 117-81-7) mg/kg mg/kg IEC 62321-8 (2017)/
. / With reference to IEC 62321-8
(2017). Analysis was performed by GC/MS. 50 n.d. 1000 50 n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 22 of 39
*CE/2017/C0524*
(Test Items)
(Unit)
(Method)
/ DBP (Dibutyl phthalate) (CAS No.: 84-74-2)
/ BBP (Butyl Benzyl phthalate) (CAS No.: 85-68-7)
/ DIBP (Di-isobutyl phthalate) (CAS No.: 84-69-5)
/ DINP (Di-isononyl phthalate) (CAS No.: 28553-12-0;
68515-48-0)
/ DIDP (Di-isodecyl phthalate) (CAS No.: 26761-40-0;
68515-49-1)
/ DNOP (Di-n-octyl phthalate) (CAS No.: 117-84-0)
/ DNHP (Di-n-hexyl phthalate) (CAS No.: 84-75-3)
(C6-8)C7 /
DIHP (1,2-Benzenedicarboxylic acid, di-C6-
8-branched alkyl esters, C7-rich) (CAS No.:
71888-89-6)
(C7-11) /
DHNUP (1,2-Benzenedicarboxylic acid, di-C7-11-branched and linear alkyl esters) (CAS No.: 68515-42-4)
(2-) / DMEP
(Bis (2-methoxyethyl) phthalate) (CAS No.: 117-82-8)
/ DIPP (Di-iso-
pentyl phthalate) (CAS No.: 605-50-5) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg IEC 62321-8 (2017)/
. / With reference to IEC 62321-8
(2017). Analysis was performed by GC/MS.
(MDL)
(Result)
(Limit) No.1 n.d. 1000 n.d. 1000 n.d. 1000 50 50 50 50 50 50 50 50 n.d. n.d. n.d. n.d. n.d. 50 n.d. 50 n.d. 50 n.d.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 23 of 39
*CE/2017/C0524*
(Test Items)
() / 1,2-
Benzenedicarboxylic acid, dipentylester, branched and linear (CAS No.: 84777-06-0)
/ Di-n-pentyl phthalate (CAS No.: 131-18-0)
/ NPIPP (N-
pentyl-isopentyl phtalate) (CAS No.:
776297-69-9)
/ Bis(tributyltin)oxide
(TBTO)*** (CAS No.: 56-35-9)
/ DEP (Di-ethyl phthalate) (CAS No.: 84-66-2)
/ DMP (Di-methyl phthalate) (CAS No.: 131-11-3)
() / Halogen-Chlorine (Cl) (CAS No.: 22537-15-1)
() / Halogen-Bromine (Br) (CAS No.: 10097-32-2)
/ Red phosphorus
(Unit) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg
(Method)
(MDL)
(Result)
(Limit) IEC 62321-8 (2017)/
. / With reference to IEC 62321-8
(2017). Analysis was performed by GC/MS. ISO 17353 (2004)/
. / With reference to ISO 17353
(2004). Analysis was performed by GC/FPD.
n.d. IEC 62321-8 (2017)/
. / With reference to IEC 62321-8
(2017). Analysis was performed by GC/MS. BS EN 14582 (2016). /
With reference to BS EN 14582 (2016). Analysis was performed by IC. BS EN 14582 (2016). /
With reference to BS EN 14582 (2016). Analysis was performed by IC.
-/. / Analysis was performed by Pyrolyzer-GC/MS. No.1 n.d. n.d. n.d. n.d. n.d. 364 50 50 50 50 50 50 50 54600
Negative
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 24 of 39
*CE/2017/C0524*
(Note) 1. 2. 3. 4. 5. 6. 7. 8. mg/kg = ppm0.1wt% = 1000ppm MDL = Method Detection Limit () n.d. = Not Detected ()
"-" = Not Regulated ()
**= Qualitative analysis (No Unit) () Negative = Undetectable (); Positive = Detectable ()
<0.1%~100%Positive Negative/ Testing range of asbestos qualitative analysis is from less than 0.1% to 100%. The judgment criterion: asbestos fibers being found is shown as "Positive"; asbestos fibers not being found is shown as
"Negative".
***: (: ). MDL
(: ). (The substance was calculated by the test results of Dioctyl Tin (DOT), MonooctylTin (MOT), Tributyl Tin (TBT) or element (Ex. Arsenic, Boron, Beryllium respectively). The MDL was evaluated for Dioctyl Tin (DOT), MonooctylTin (MOT), Tributyl Tin (TBT) or element (Ex. Arsenic, Boron, Beryllium respectively.)) 9.
(2): : ( Ref no.: INC 000000032519) / Tetraboron disodium heptaoxide, hydrate: Only anhydrous form of disodium tetraborate is relevant and considered according to ECHA explanation (Ref no.: INC 000000032519). 10.
/ Parameter Conversion Tablehttp://twap.sgs.com/sgsrsts/chn/download-REACH_tw.asp 11.
(2): /. / The extracted soluble Boron / Arsenic are detected by ICP-AES. 12.
(Since beryllium copper is a metal alloy of copper and beryllium and the test result is n.d. for beryllium, we can have conclusion that the beryllium copper is n.d..) PFOS(Reference Information) : POPs - (EU) 757/2010 PFOS0.001%(10ppm)0.1%(1000ppm) 1g/m
(Outlawing PFOS as substances or preparations in concentrations above 0.001% (10ppm), in semi-finished products or articles or parts at a level above 0.1%(1000ppm), in textiles or other coated materials above 1 g/m.) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 25 of 39
*CE/2017/C0524*
/ Analytical flow chart of Heavy Metal These samples were dissolved totally by pre-conditioning method according to below flow chart. Cr6+ test method excluded
/ Technician : JR Wang
/ Supervisor: Troy Chang
/ CuttingPreparation
/ Sample Measurement Pb/ Cd/ Hg Cr(VI)
Acid digestion with microwave / hotplate
/ Filtration
/ Non-metal
/ Metal ABS / PC / PVC
/Others
Dissolving by ultrasonication 150~160
/ Digesting at 150~160
/ Solution
/ Residue 1) / Alkali fusion 2) / HCl to dissolve 60
Digesting at 60 by ultrasonication
Separating to get aqueous phase
/ ICP-AES pH / pH adjustment
/ Add diphenyl-
carbazide for color development UV-VIS 540 nm
/ Measure the absorbance at 540 nm by UV-VIS
/ Boiling water extraction
Cool, filter digestate through filter
Add diphenyl-
carbazide for color development UV-VIS 540 nm
/ Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 26 of 39
*CE/2017/C0524*
/ These samples were dissolved totally by pre-conditioning method according to below flow chart.
/ Technician : JR Wang
/ Supervisor: Troy Chang
(Flow Chart of digestion for the elements analysis performed by ICP-AES) ICP-AES
/ CuttingPreparation
/ Sample Measurement
() / Acid digestion by suitable acid depended on different sample material (as below table)
/ Solution
/ Filtration
/ Residue 1) / Alkali Fusion 2) / HCl to dissolve
/ ICP-AES
,,, / Steel, copper, aluminum, solder
/ Glass
,,, / Gold, platinum, palladium, ceramic
/ Silver
/ Plastic
/ Others
Aqua regia, HNO3, HCl, HF, H2O2
, / HNO3/HF
/ Aqua regia
/ HNO3
,,, / H2SO4, H2O2, HNO3, HCl
/ Added appropriate reagent to total digestion This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 27 of 39
*CE/2017/C0524*
/ Analytical flow chart
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
(DMFU)(HBCDD)(Ethylene glycol etherBNST
/ Sample pretreatment Sample extraction /
Ultrasonic method
Concentrate/Dilute Extracted solution
/ Filter
Analysis was performed by GC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 28 of 39
*CE/2017/C0524*
/ Analytical flow chart - Halogen
/ Technician: Rita Chen
/ Supervisor: Troy Chang
Sample pretreatment/separation
Weighting and putting sample in cell
Oxygen Bomb Combustion / Absorption
Dilution to fixed volume
Analysis was performed by IC This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 29 of 39
*CE/2017/C0524*
/ Analytical flow chart - Phthalate
/ Technician: Andy Shu
/ Supervisor nt: Troy Chang
/Test method: IEC 62321-8
Sample pretreatment/separation THF /
Sample dissolved/extracted by THF
Dilute Extracted solution
Analysis was performed by GC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 30 of 39
*CE/2017/C0524*
/ Analytical flow chart - Red phosphorus
/ Technician: Yaling Tu
/ Supervisor: Troy Chang Sample pretreatment Take sample and put it into sample cup Analysis was performed by py-GC/MS
/ DATA This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 31 of 39
*CE/2017/C0524*
Analytical flow chart - volatile organic compounds (VOCs)
/ TechnicianChun Wu
/ SupervisorShinjyh Chen
(Reference method)US EPA 5021, 5021A
/ Sample pretreatment
Take sample and put it into headspace glassware and seal.
Bake the sample in the oven
Emitted gas was performed by GC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 32 of 39
*CE/2017/C0524*
/ Analysis flow chart for determination of Asbestos
/ Technician: Victor Kao
/ Supervisor: Wendy Wei
(Reference method): EPA 600/R-93/116
/ Sampling
/ Transportation and Storage
/ Preparation of primary analytical sample
/ Examination by stereomicroscope (SM)
/ Asbestos identification by dispersion staining polarized light microscope (DS-PLM)
/ Continue when problems are encountered with DS-PLM and/or for quality assurance purposes
/ Interference matrix removal
Asbestos identification by dispersion staining polarized light microscope X /
Asbestos identification by X-ray diffraction spectrometer
/ Asbestos fiber is
/ Asbestos fiber is present absent
/ Containing Asbestos/
/ Positive
/ Not containing Asbestos/
/ Negative This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 33 of 39
*CE/2017/C0524*
/ / Analytical flow chart - PFOA/PFOS
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
/ Sample pretreatment
Sample extraction by Ultrasonic extraction
( Reference method: US EPA 3550C)
Concentrate/Dilute Extracted solution
Analysis was performed by LC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 34 of 39
*CE/2017/C0524*
/ Analytical flow chart - Cobalt dichloride
/ Technician : JR Wang
/ Supervisor: Troy Chang
/ Sampling
Sample pretreated by acid digestion and solvent extraction
Analysis was performed by ICP-AES
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 35 of 39
*CE/2017/C0524*
/ Analysis flow chart - PVC
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
/ Sample pre-treatment
/ Flame test
/ Sample analyzed by FTIR C-Cl /
Check wave-number of C-Cl bonding
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 36 of 39
*CE/2017/C0524*
/ Analytical flow chart - Organic-Tin
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
/ Sample pretreatment
Sample extraction by organic solvent
Derived by Sodium tetraethylborate
Concentrate/Dilute Extracted solution
Analysis was performed by GC/FPD
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 37 of 39
*CE/2017/C0524*
/ Analytical flow chart
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
(PCTs)(PCNs)(PCBs)(SCCP)
/ Sample pretreatment Sample extraction /
Ultrasonic method
Concentrate/Dilute Extracted solution
/ Filter
Analysis was performed by GC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 38 of 39
*CE/2017/C0524*
/ / Analytical flow chart - PBB/PBDE
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
/ First testing process
/ Optional screen process
/ Confirmation process Sample /
Sample pretreatment /
Screen analysis /
Sample extraction /
Soxhlet method Concentrate/Dilute Extracted solution
Filter /
Analysis by GC/MS /
Issue Report
#FLOW
#FLOW This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(Date) : 2017/12/15
(No.) : CE/2017/C0524 Test Report
() / NAN YA PLASTICS CORPORATION (TAIWAN)
(() / NAN YA ELECTRONIC MATERIALS (KUNSHAN) CORP., LTD.)
(() / NAN YA ELECTRONIC MATERIALS (HUIZHOU) CORP., LTD.) 201 / 201 TUNG HWA NORTH ROAD, TAIPEI, TAIWAN
(201 / 201 CHANG JIANG ROAD(S) KUNSHAN ECONOMIC &
TECHNICAL DEVELOPMENT ZONE, JIANG SU)
( / YONGSHI BOULEVARD SHIWAN TOWN BOLUO COUNTY HUIZHOU CITY GUANG DONG)
(Page): 39 of 39
#PIC
*CE/2017/C0524*
(The tested sample / part is marked by an arrow if it's shown on the photo.)
** (End of Report) **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :1of13
*CE/2017/82435A*
The follow ing sam p les w as/w ere su bm itted and identified by/on behalfofthe ap p licantas :
S am ple S u bm itted B y S am ple D es cription S tyle/Item N o. S am ple R eceiv ing D ate T es ting P eriod
D A I-IC H IS E IK O C O.,L T D . P L A S T IC (1844-011) D U R A N E X 310N F 2017/08/10 2017/08/10 T O 2017/08/16
TestR eq u ested
(1)
(2) A s s pecified by client,w ith reference to R oH S 2011/65/E U A nnex IIand am ending D irectiv e (E U )2015/863to determ ine C adm iu m ,L ead,M ercu ry,C r(V I),P B B s ,P B D E s ,D B P ,B B P ,D E H P ,D IB P contents in the s u bm itted s am ple(s ). P leas e referto next pages forthe otheritem (s ). TestR esu lt(s)
P leas e referto follow ing pages . This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :2 of13
*CE/2017/82435A*
TestR esu lt(s) P A R T N A M E N o.1 B L A C K P L A S T IC TestItem (s) M ethod M D L W ith reference to IE C 62321-5 (2013)and perform ed by IC P -A E S . W ith reference to IE C 62321-5 (2013)and perform ed by IC P -A E S . W ith reference to IE C 62321-4 (2013)and perform ed by IC P -A E S . W ith reference to IE C 62321-7-2 (2017)and perform ed by U V -V IS . H exav alent C hrom iu m C r(V I) m g/kg C adm iu m (C d) L ead (P b) M ercu ry (H g) S u m ofP B B s M onobrom obiphenyl D ibrom obiphenyl T ribrom obiphenyl T etrabrom obiphenyl P entabrom obiphenyl H exabrom obiphenyl H eptabrom obiphenyl Octabrom obiphenyl N onabrom obiphenyl D ecabrom obiphenyl S u m ofP B D Es M onobrom odiphenylether D ibrom odiphenylether T ribrom odiphenylether T etrabrom odiphenylether P entabrom odiphenylether H exabrom odiphenylether H eptabrom odiphenylether Octabrom odiphenylether N onabrom odiphenylether D ecabrom odiphenylether U nit m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg W ith reference to IE C 62321-6 (2015)and perform ed by G C /M S . R esu lt N o.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. 2 2 2 8
5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :3of13
*CE/2017/82435A*
TestItem (s) M ethod W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . W ith reference to IE C 62321(2008).A nalys is w as perform ed by G C /M S . m g/kg W ith reference to IE C 62321-8 (2017). A nalys is w as perform ed by G C /M S . 50 n.d. U nit m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg m g/kg D E H P (D i-(2-ethylhexyl) phthalate)(C A S N o.:117-81-7) D B P (D ibu tylphthalate)(C A S N o.:84-74-2) B B P (B u tylB enzylphthalate)
(C A S N o.:85-68-7) D IN P (D i-is ononylphthalate)
(C A S N o.:28553-12-0;68515-48-
0) D ID P (D i-is odecylphthalate)
(C A S N o.:26761-40-0;68515-49-
1) D N OP (D i-n-octylphthalate)
(C A S N o.:117-84-0) D IB P (D i-is obu tylphthalate)(C A S N o.:84-69-5) H exabrom ocyclododecane
(H B C D D )and allm ajor dias tereois om ers identified ( -
H B C D D , - H B C D D , - H B C D D )
(C A S N o.:25637-99-4 and 3194-
55-6 (134237-51-7,134237-50-6, 134237-52-8)) A ntim ony (S b) M D L 50 50 50 50 50 50 5 2
2 R esu lt N o.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. 25500 m g/kg W ith reference to U S E P A 3052 (1996). A nalys is w as perform ed by IC P -A E S . A ntim ony trioxide (S b
(C A S N o.:1309-64-4) P hos phoru s (P ) O
m g/kg W ith reference to U S E P A 3052 (1996). A nalys is w as perform ed by IC P -A E S .***
m g/kg W ith reference to U S E P A 3052 (1996). A nalys is w as perform ed by IC P -A E S . This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :4 of13
*CE/2017/82435A*
TestItem (s) M ethod P erflu orooctane s u lfonates
(P FOS -A cid,M etalS alt,A m ide) P FOA (C A S N o.:335-67-1) m g/kg T etrabrom obis phenolA (T B B P -A )
(C A S N o.:79-94-7) m g/kg W ith reference to U S E P A 3550C (2007). A nalys is w as perform ed by L C /M S . W ith reference to U S E P A 3550C (2007). A nalys is w as perform ed by L C /M S . W ith reference to G lobalS OP R S T S -E &E -
121(2012).A nalys is w as perform ed by L C /M S . U nit m g/kg m g/kg m g/kg m g/kg m g/kg H alogen H alogen-Flu orine (F)
(C A S N o.:14762-94-8) H alogen-C hlorine (C l)
(C A S N o.:22537-15-1) H alogen-B rom ine (B r)
(C A S N o.:10097-32-2) H alogen-Iodine (I)
(C A S N o.:14362-44-8) W ith reference to B S E N 14582 (2016). A nalys is w as perform ed by IC . M D L 10 10 10 50 50 50 50 R esu lt N o.1 n.d. n.d. n.d. 928 n.d. n.d. n.d. N ote 1. 2. 3. 4. 5. 6. m g/kg = ppm 0.1w t% = 1000ppm M D L n.d.=
***:T he s u bs tance w as calcu lated by the tes t res u lt ofA ntim ony.T he M D L w as ev alu ated forA ntim ony.
= M ethod D etection L im it N ot D etected = les s than M D L N ot R egu lated P aram eterC onv ers ion T able http://tw ap.s gs .com /s gs rs ts /chn/dow nload-R E A C H _ tw .as p P FO S R eference Inform ation :P O P s -(EU ) 757/20 1 0 Ou tlaw ing P FOS as s u bs tances orpreparations in concentrations abov e 0.001% (10ppm ),in s em i-finis hed produ cts orarticles orparts at a lev elabov e 0.1% (1000ppm ),in textiles orothercoated m aterials abov e 1 g/m . This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :5 of13
*CE/2017/82435A*
#FL OW A nalyticalflow chartofH eavy M etal T hes e s am ples w ere dis s olv ed totally by pre-conditioningm ethod according to below flow chart.C r6+ tes t m ethod exclu ded T echnician :JR W ang S u perv is or:T roy C hang C u ttingPreparation Sam ple M eas u rem ent P b/C d/H g C r6+
A cid diges tion w ith m icrow av e /hotplate N on-m etal M etal Filtration A B S / P C / PV C O thers Solu tion R es idu e D is s olv ingby u ltras onication D iges tingat 150~160 1) Alkalifu s ion 2) H C lto dis s olv e D iges ting at 60 by u ltras onication S eparating to get aqu eou s phas e IC P -AE S pH adju s tm ent B oilingw ater extraction C ool,filter diges tatethrou gh filter Add diphenyl-
carbazide forcolor dev elopm ent M eas u re the abs orbance at 540 nm by U V -V IS A dd diphenyl-carbazide for colordev elopm ent M eas u re the abs orbance at 540 nm by U V -V IS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :6 of13
*CE/2017/82435A*
T hes es am ples w eredis s olv ed totally by pre-conditioningm ethod according to below flow chart. T echnician:JR W ang Su perv is or:T roy C hang Flow C hartofdigestion for the elem ents analysis p erform ed by IC P-A ES C u tting /P reparation S am pleM eas u rem ent Acid diges tion by s u itable acid depended on different s am ple m aterial(as below table) Solu tion Filtration IC P-A E S R es idu e 1) A lkaliFu s ion 2) H C lto dis s olv e Steel,copper,alu m inu m ,s older G las s G old,platinu m ,palladiu m ,ceram ic S ilv er P las tic Others Aqu a regia,H N O3,H C l,H F,H 2O2 H N O3/H F Aqu a regia H N O3 H 2SO4,H 2O2,H N O3,H C l Added appropriatereagent to totaldiges tion This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :7 of13
*CE/2017/82435A*
A nalyticalflow chart PB B / P B D E T echnician :Yaling T u S u perv is or:T roy C hang Firs t tes ting proces s Optionals creen proces s C onfirm ation proces s Sam ple Sam plepretreatm ent Screen analys is S am ple extraction /
Soxhlet m ethod C oncentrate/D ilu te E xtracted s olu tion Filter Analys is by G C /M S Is s u eR eport This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :8 of13
*CE/2017/82435A*
A nalyticalflow chart-P hthalate T echnician:Andy S hu Su perv is or:T roy C hang Testm ethod:IEC 62321 -8 S am ple pretreatm ent/s eparation S am ple dis s olv ed/extracted by T H F D ilu te E xtracted s olu tion Analys is w as perform ed by G C /M S D ata This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :9of13
*CE/2017/82435A*
A nalyticalflow chart-H B C D D T echnician:YalingT u S u perv is or:T roy C hang Sam plepretreatm ent Sam pleextraction /U ltras onicm ethod C oncentrate/D ilu te E xtracted s olu tion A nalys is w as perform ed by G C /M S Filter D ata This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :10 of13
*CE/2017/82435A*
A nalyticalflow chart-TB B P -A T echnician:YalingT u Su perv is or:T roy C hang Sam plepretreatm ent S am ple extraction by U ltras onicextraction C oncentrate/D ilu te E xtracted s olu tion A nalys is w as perform ed by L C /M S D ata This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :11of13
*CE/2017/82435A*
A nalyticalflow chart-PFO A /PFO S T echnician:YalingT u Su perv is or:T roy C hang S am ple pretreatm ent S am pleextraction by U ltras onicextraction
(R eference m ethod:U S E PA 3550C ) C oncentrate/D ilu te E xtracted s olu tion A nalys is w as perform ed by L C /M S D ata This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :12 of13
*CE/2017/82435A*
A nalyticalflow chart-H alogen T echnician:R ita C hen Su perv is or:T roy C hang S am ple pretreatm ent /S eparation W eighting and pu ttings am ple in cell Oxygen B om b C om bu s tion /Abs orption D ilu tion to fixed v olu m e A nalys is w as perform ed by IC This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group TestR ep ort N o.:C E /2017/82435A D A I-IC H IS E IK O C O.,L T D . 15F-6,N O.700,JU N G -JE N G R D ,JU N G -H E C IT Y,T A IP E I235,T A IW A N ,R .O.C . D ate :2017/08/22 P age :13of13
*CE/2017/82435A*
#PIC
*The tested sam p le / p artis m arked by an arrow ifit's show n on the p hoto.*
** E nd ofR eport **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3496 Date : 2017/12/22 Page: 1 of 4
*CE/2017/C3496*
The following sample(s) was/were submitted and identified by/on behalf of the applicant as :
Sample Submitted By Sample Description Style/Item No. Sample Receiving Date Testing Period DAI-ICHI SEIKO CO., LTD. METAL(2726-000*) C5210R 2017/12/18 2017/12/18 TO 2017/12/22
Test Requested As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI) contents in the submitted sample(s). Test Method Please refer to following pages. Test Result(s) Please refer to following pages.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3496 Date : 2017/12/22 Page: 2 of 4
*CE/2017/C3496*
Test Result(s) PART NAME No.1 COPPER COLORED METAL SHEET Test Item(s) Unit Method MDL Cadmium (Cd) mg/kg With reference to IEC 62321-5 (2013) and Lead (Pb) mg/kg With reference to IEC 62321-5 (2013) and Mercury (Hg) mg/kg With reference to IEC 62321-4 (2013) and Hexavalent Chromium Cr(VI)(#2) g/cm With reference to IEC 62321-7-1 (2015) 0.10 performed by ICP-AES. performed by ICP-AES. performed by ICP-AES. and performed by UV-VIS. 2 2 2 Result No.1 n.d. 11.4 n.d. n.d. Note 1. 2. 3. 4. mg/kg = ppm 0.1wt% = 1000ppm n.d. = Not Detected MDL = Method Detection Limit
(#2) =
a. The sample is positive for Cr(VI) if the Cr(VI) concentration is greater than 0.13 g/cm. The sample coating is considered to contain Cr(VI) b. The sample is negative for Cr(VI) if Cr(VI) is n.d. (concentration less than 0.10 g/cm). The coating is considered a non-Cr(VI) based coating c. The result between 0.10 g/cm and 0.13 g/cm is considered to be inconclusive - unavoidable coating variations may influence the determination. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3496 Date : 2017/12/22 Page: 3 of 4
*CE/2017/C3496*
These samples were dissolved totally by pre-conditioning method according to below flow chart. Cr6+ test method excluded Analytical flow chart of Heavy Metal Technician : JR Wang Supervisor: Troy Chang CuttingPreparation Sample Measurement Pb/Cd/Hg/Cr Cr6+
Acid digestion with microwave / hotplate Non-metal Metal Filtration ABS / PC / PVC Others Solution Residue Dissolving by ultrasonication Digesting at 150~160 1) 2) Alkali fusion HCl to dissolve Digesting at 60 by ultrasonication Separating to get aqueous phase ICP-AES pH adjustment Boiling water extraction Cool, filter digestate through filter Add diphenyl-
carbazide for color development Measure the absorbance at 540 nm by UV-VIS Add diphenyl-carbazide for color development Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3496 Date : 2017/12/22 Page: 4 of 4
*CE/2017/C3496*
#PIC
* The tested sample / part is marked by an arrow if it's shown on the photo. *
** End of Report **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3495 Date : 2017/12/22 Page: 1 of 4
*CE/2017/C3495*
The following sample(s) was/were submitted and identified by/on behalf of the applicant as :
Sample Submitted By Sample Description Style/Item No. Sample Receiving Date Testing Period DAI-ICHI SEIKO CO., LTD. METAL(2729-0001) C5191R 2017/12/18 2017/12/18 TO 2017/12/22
Test Requested As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI) contents in the submitted sample(s). Test Method Please refer to following pages. Test Result(s) Please refer to following pages.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3495 Date : 2017/12/22 Page: 2 of 4
*CE/2017/C3495*
Test Result(s) PART NAME No.1 COPPER COLORED METAL SHEET Test Item(s) Unit Method MDL Cadmium (Cd) mg/kg With reference to IEC 62321-5 (2013) and Lead (Pb) mg/kg With reference to IEC 62321-5 (2013) and Mercury (Hg) mg/kg With reference to IEC 62321-4 (2013) and Hexavalent Chromium Cr(VI)(#2) g/cm With reference to IEC 62321-7-1 (2015) 0.10 performed by ICP-AES. performed by ICP-AES. performed by ICP-AES. and performed by UV-VIS. 2 2 2 Result No.1 n.d. 11.7 n.d. n.d. Note 1. 2. 3. 4. mg/kg = ppm 0.1wt% = 1000ppm n.d. = Not Detected MDL = Method Detection Limit
(#2) =
a. The sample is positive for Cr(VI) if the Cr(VI) concentration is greater than 0.13 g/cm. The sample coating is considered to contain Cr(VI) b. The sample is negative for Cr(VI) if Cr(VI) is n.d. (concentration less than 0.10 g/cm). The coating is considered a non-Cr(VI) based coating c. The result between 0.10 g/cm and 0.13 g/cm is considered to be inconclusive - unavoidable coating variations may influence the determination. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3495 Date : 2017/12/22 Page: 3 of 4
*CE/2017/C3495*
These samples were dissolved totally by pre-conditioning method according to below flow chart. Cr6+ test method excluded Analytical flow chart of Heavy Metal Technician : JR Wang Supervisor: Troy Chang CuttingPreparation Sample Measurement Pb/Cd/Hg/Cr Cr6+
Acid digestion with microwave / hotplate Non-metal Metal Filtration ABS / PC / PVC Others Solution Residue Dissolving by ultrasonication Digesting at 150~160 1) 2) Alkali fusion HCl to dissolve Digesting at 60 by ultrasonication Separating to get aqueous phase ICP-AES pH adjustment Boiling water extraction Cool, filter digestate through filter Add diphenyl-
carbazide for color development Measure the absorbance at 540 nm by UV-VIS Add diphenyl-carbazide for color development Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3495 Date : 2017/12/22 Page: 4 of 4
*CE/2017/C3495*
#PIC
* The tested sample / part is marked by an arrow if it's shown on the photo. *
** End of Report **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3499 Date : 2017/12/22 Page : 1 of 5
*CE/2017/C3499*
The following sample(s) was/were submitted and identified by/on behalf of the applicant as :
Sample Submitted By Sample Description Style/Item No. Sample Receiving Date Testing Period
DAI-ICHI SEIKO CO., LTD. PLATING(1845-011) PLATING8(Au/Ni) 2017/12/18 2017/12/18 TO 2017/12/22
Test Requested
(1) As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI) contents in the submitted sample(s).
(2) As specified by client, to test PFOS contents in the submitted sample. Test Result(s)
Please refer to following pages. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3499 Date : 2017/12/22 Page : 2 of 5
*CE/2017/C3499*
PART NAME No.1 PLATING LAYER OF SILVER/GOLDEN COLORED METAL SHEET Test Item(s) Method MDL Unit mg/kg mg/kg mg/kg IEC 62321-5 (2013) application of modified digestion by surface etching and performed by ICP-AES. IEC 62321-5 (2013) application of modified digestion by surface etching and performed by ICP-AES. IEC 62321-4 (2013) application of modified digestion by surface etching and performed by ICP-AES. 2 2 2 Result No.1 n.d. n.d. n.d. Hexavalent Chromium Cr(VI)(#2) g/cm With reference to IEC 62321-7-1 (2015) 0.10 n.d. and performed by UV-VIS. Perfluorooctane sulfonates (PFOS-
Acid, Metal Salt, Amide) g/m With reference to US EPA 3550C (2007). 1 n.d. Analysis was performed by LC/MS. Test Result(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Note 1. 2. 3. 4. mg/kg = ppm 0.1wt% = 1000ppm n.d. = Not Detected MDL = Method Detection Limit
(#2) =
a. The sample is positive for Cr(VI) if the Cr(VI) concentration is greater than 0.13 g/cm. The sample coating is considered to contain Cr(VI) b. The sample is negative for Cr(VI) if Cr(VI) is n.d. (concentration less than 0.10 g/cm). The coating is considered a non-Cr(VI) based coating c. The result between 0.10 g/cm and 0.13 g/cm is considered to be inconclusive - unavoidable coating variations may influence the determination. PFOS Reference Information : POPs - (EU) 757/2010 Outlawing PFOS as substances or preparations in concentrations above 0.001% (10ppm), in semi-finished products or articles or parts at a level above 0.1%(1000ppm), in textiles or other coated materials above 1g/m. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3499 Date : 2017/12/22 Page : 3 of 5
*CE/2017/C3499*
#FLOW The plating layer of samples were dissolved totally by pre-conditioning method according to below flow chart.Cr6+ test method excluded Technician: JR Wang Supervisor: Troy Chang Flow Chart of Stripping method for metal analysis Preparation Cr6 Sample measurement (area) PbCdHg Boiling water extraction Sample measurement (weight) Prepare suitable acid solution Put sample into acid solution Dissolve plating layer Solution ICP-AES Cool, filter digestate through filter Add diphenyl-carbazide for color development Measure the absorbance at 540 nm by UV-VIS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3499 Date : 2017/12/22 Page : 4 of 5
*CE/2017/C3499*
Analytical flow chart - PFOS Technician: Yaling Tu Supervisor: Troy Chang Sample pretreatment Sample extraction by Ultrasonic extraction
(Reference method: US EPA 3550C) Concentrate/Dilute Extracted solution Analysis was performed by LC/MS Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report DAI-ICHI SEIKO CO., LTD. 7F-5, NO. 700, JUNG-JENG RD, JUNG-HE CITY, TAIPEI 235, TAIWAN, R. O. C. No. : CE/2017/C3499 Date : 2017/12/22 Page : 5 of 5
*CE/2017/C3499*
#PIC
* The tested sample / part is marked by an arrow if it's shown on the photo. *
** End of Report **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report
: TWNC00660407 Number Date
: Jan 09, 2018 Applicant :
WONDERFUL HI-TECH CO., LTD. No.17, Beiyuan Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Sample Description :
One (1) group of submitted samples said to be :
Sample Submitted By Sample Description
: WONDERFUL HI-TECH CO., LTD. Style / Item No. Date Sample Received Date Test Started Test Conducted :
: Dec 20, 2017
: Dec 21, 2017 As requested by the applicant, for details please refer to attached pages.
: RF COAXIAL CABLE RG-178 B/U, RG-179/U, RG-316U, RG-58A/U, MINI 0.8mm, 0.98mm, 1.13mm, 1.27mm, 1.32mm, 1.37mm, 1.48mm, RF405A, UL 1330, 1331, 1332, 1333, 1726, 1727, 1867, 1979, 10231, 10064, 10362
: BLACK, BROWN, RED, ORANGE, YELLOW, GREEN, BLUE, PURPLE, GRAY, WHITE Authorized by:
On Behalf of Intertek Testing Services Taiwan Limited Matt Wang Sr. Manager Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 1 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Report Number
: TWNC00660407 Result Pass Standard Restriction Of Hazardous Substances (RoHS) Test As per applicants request with reference to 2011/65/EU and Amendment (EU) 2015/863 2011/65/EU
(EU) 2015/863 As per applicants Request Halogen Content Perfluorooctane Sulfonates (PFOS) Content See Test Conducted See Test Conducted See Test Conducted See Test Conducted See Test Conducted Perfluorooctanoic Acid (PFOA) Antimony (Sb) Content Phthalates Conclusion :
Tested Sample Submitted Samples Authorized by:
On Behalf of Intertek Testing Services Taiwan Limited Matt Wang Sr. Manager Intertek Testing Services Taiwan Ltd. Test Components :
(1) Black plastic pellets
(2) Brown plastic pellets
(3) Red plastic pellets
(4) Orange plastic pellets
(5) Yellow plastic pellets
(6) Green plastic pellets
(7) Blue plastic pellets
(8) Purple plastic pellets
(9) Grey plastic pellets
(10) White plastic pellets
*THJ0660407* Page 2 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Test Result Summary :
Heavy Metal Test Item Unit Test Method Result
(1)
(2)
(3) RL Cadmium (Cd) Content ppm ND ND ND 2 Lead (Pb) Content ppm ND ND ND 2 Mercury (Hg) Content ppm ND ND ND 2 Antimony (Sb) Content ppm ND ND ND 2 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
4:2013+AMD1:2017, by microwave or acid digestion and determined by ICP-OES. IEC 62321-4:2013+AMD 1:2017 With reference to USEPA 3052, by microwave digestion and determined by ICP-OES. USEPA 3052 With reference to IEC 62321-
7-2: 2017, organic solvent was used to dissolve or swell sample matrix, followed by alkaline digestion and determined by UV-Vis Spectrophotometer. IEC 62321-7-2:2017
Chromium VI (Cr6+) Content ppm ND ND ND 8 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 3 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Item Unit Test Method Result
(1)
(2)
(3) RL Test Conducted :
ppm ppm ppm ppm ppm ppm ppm ppm ppm Polybrominated Biphenyls (PBBs) Monobrominated Biphenyls
(MonoBB) Dibrominated Biphenyls
(DiBB) Tribrominated Biphenyls
(TriBB) Tetrabrominated Biphenyls
(TetraBB) Pentabrominated Biphenyls
(PentaBB) Hexabrominated Biphenyls
(HexaBB) Heptabrominated Biphenyls
(HeptaBB) Octabrominated Biphenyls
(OctaBB) Nonabrominated Biphenyls
(NonaBB) Decabrominated Biphenyl
(DecaBB) Polybrominated Diphenyl Ethers (PBDEs) Monobrominated Diphenyl Ethers
(MonoBDE) Dibrominated Diphenyl Ethers
(DiBDE) Tribrominated Diphenyl Ethers
(TriBDE) Tetrabrominated Diphenyl Ethers
(TetraBDE) Pentabrominated Diphenyl Ethers
(PentaBDE) Hexabrominated Diphenyl Ethers
(HexaBDE) Heptabrominated Diphenyl Ethers
(HeptaBDE) Octabrominated Diphenyl Ethers
(OctaBDE) Nonabrominated Diphenyl Ethers
(NonaBDE) Decabrominated Diphenyl Ether
(DecaBDE) ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-DAD confirmation when necessary. IEC 62321-6: 2015 With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-DAD confirmation when necessary. IEC 62321-6: 2015 Number
: TWNC00660407 ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 4 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Method Result
(1)
(2)
(3) Test Conducted :
Test Item Phthalates Di(2-ethylhexyl) Phthalate (DEHP)
(2-) Dibutyl Phthalate
(DBP) Benzyl Butyl Phthalate
(BBP) Di-(Iso-Nonyl) Phthalate
(DINP) Di-(Iso-Decyl) Phthalate
(DIDP) Di-(N-Octyl) Phthalate
(DNOP) Diisobutyl Phthalate (DIBP) Di-n-hexyl phthalate (DNHP) Halogen Content Fluorine (F) Chlorine (Cl) Bromine (Br) Iodine (I) Unit ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm With reference to IEC 62321-
8:2017, by solvent extraction and determined by GC-MS. IEC 62321-8:2017 With reference to EN 14582:2016 by combustion bomb with oxygen and determined by Ion Chromatography. EN 14582:2016 Number
: TWNC00660407 ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND RL 50 50 50 50 50 50 50 50 50 50 50 466737 486149 511065 50 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 5 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Others Perfluorooctane Sulfonates Including PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE Perfluorooctanoic Acid
(PFOA) Test Item Unit Test Method Result
(1)
(2)
(3) RL ppm ND ND ND 0.01 ppm ND ND ND 0.01 With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 6 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Heavy Metal Test Item Unit Test Method Result
(4)
(5)
(6) RL Cadmium (Cd) Content ppm ND ND ND 2 Lead (Pb) Content ppm ND ND ND 2 Mercury (Hg) Content ppm ND ND ND 2 Antimony (Sb) Content ppm ND ND ND 2 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
4:2013+AMD1:2017, by microwave or acid digestion and determined by ICP-OES. IEC 62321-4:2013+AMD 1:2017 With reference to USEPA 3052, by microwave digestion and determined by ICP-OES. USEPA 3052 With reference to IEC 62321-
7-2: 2017, organic solvent was used to dissolve or swell sample matrix, followed by alkaline digestion and determined by UV-Vis Spectrophotometer. IEC 62321-7-2:2017
Chromium VI (Cr6+) Content ppm ND ND ND 8 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 7 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Item Unit Test Method Result
(4)
(5)
(6) RL Test Conducted :
ppm ppm ppm ppm ppm ppm ppm ppm ppm Polybrominated Biphenyls (PBBs) Monobrominated Biphenyls
(MonoBB) Dibrominated Biphenyls
(DiBB) Tribrominated Biphenyls
(TriBB) Tetrabrominated Biphenyls
(TetraBB) Pentabrominated Biphenyls
(PentaBB) Hexabrominated Biphenyls
(HexaBB) Heptabrominated Biphenyls
(HeptaBB) Octabrominated Biphenyls
(OctaBB) Nonabrominated Biphenyls
(NonaBB) Decabrominated Biphenyl
(DecaBB) Polybrominated Diphenyl Ethers (PBDEs) Monobrominated Diphenyl Ethers
(MonoBDE) Dibrominated Diphenyl Ethers
(DiBDE) Tribrominated Diphenyl Ethers
(TriBDE) Tetrabrominated Diphenyl Ethers
(TetraBDE) Pentabrominated Diphenyl Ethers
(PentaBDE) Hexabrominated Diphenyl Ethers
(HexaBDE) Heptabrominated Diphenyl Ethers
(HeptaBDE) Octabrominated Diphenyl Ethers
(OctaBDE) Nonabrominated Diphenyl Ethers
(NonaBDE) Decabrominated Diphenyl Ether
(DecaBDE) ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-DAD confirmation when necessary. IEC 62321-6: 2015 With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-DAD confirmation when necessary. IEC 62321-6: 2015 Number
: TWNC00660407 ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 8 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Method Result
(4)
(5)
(6) Test Conducted :
Test Item Phthalates Di(2-ethylhexyl) Phthalate (DEHP)
(2-) Dibutyl Phthalate
(DBP) Benzyl Butyl Phthalate
(BBP) Di-(Iso-Nonyl) Phthalate
(DINP) Di-(Iso-Decyl) Phthalate
(DIDP) Di-(N-Octyl) Phthalate
(DNOP) Diisobutyl Phthalate (DIBP) Di-n-hexyl phthalate (DNHP) Halogen Content Fluorine (F) Chlorine (Cl) Bromine (Br) Iodine (I) Unit ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm With reference to IEC 62321-
8:2017, by solvent extraction and determined by GC-MS. IEC 62321-8:2017 With reference to EN 14582:2016 by combustion bomb with oxygen and determined by Ion Chromatography. EN 14582:2016 Number
: TWNC00660407 ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND RL 50 50 50 50 50 50 50 50 50 50 50 485254 549283 411209 50 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 9 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Others Perfluorooctane Sulfonates Including PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE Perfluorooctanoic Acid
(PFOA) Test Item Unit Test Method Result
(4)
(5)
(6) RL ppm ND ND ND 0.01 ppm ND ND ND 0.01 With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 10 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Heavy Metal Test Item Unit Test Method Result
(7)
(8)
(9)
(10) RL Cadmium (Cd) Content ppm ND ND ND ND 2 Lead (Pb) Content ppm ND ND ND ND 2 Mercury (Hg) Content ppm ND ND ND ND 2 Antimony (Sb) Content ppm ND ND ND ND 2 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-
4:2013+AMD1:2017, by microwave or acid digestion and determined by ICP-OES. IEC 62321-4:2013+AMD 1:2017 With reference to USEPA 3052, by microwave digestion and determined by ICP-OES. USEPA 3052 With reference to IEC 62321-
7-2: 2017, organic solvent was used to dissolve or swell sample matrix, followed by alkaline digestion and determined by UV-Vis Spectrophotometer. IEC 62321-7-2:2017
Chromium VI (Cr6+) Content ppm ND ND ND ND 8 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 11 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Item Unit Test Method Result
(8)
(9) RL
(10) Test Conducted :
With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-
DAD confirmation when necessary. IEC 62321-6: 2015 ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm Polybrominated Biphenyls (PBBs) Monobrominated Biphenyls
(MonoBB) Dibrominated Biphenyls
(DiBB) Tribrominated Biphenyls
(TriBB) Tetrabrominated Biphenyls
(TetraBB) Pentabrominated Biphenyls
(PentaBB) Hexabrominated Biphenyls
(HexaBB) Heptabrominated Biphenyls
(HeptaBB) Octabrominated Biphenyls
(OctaBB) Nonabrominated Biphenyls
(NonaBB) Decabrominated Biphenyl
(DecaBB) Polybrominated Diphenyl Ethers (PBDEs) Monobrominated Diphenyl Ethers (MonoBDE) Dibrominated Diphenyl Ethers (DiBDE) Tribrominated Diphenyl Ethers (TriBDE) Tetrabrominated Diphenyl Ethers (TetraBDE) Pentabrominated Diphenyl Ethers (PentaBDE) Hexabrominated Diphenyl Ethers (HexaBDE) Heptabrominated Diphenyl Ethers (HeptaBDE) Octabrominated Diphenyl Ethers (OctaBDE) Nonabrominated Diphenyl Ethers (NonaBDE) Decabrominated Diphenyl Ether (DecaBDE) ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm With reference to IEC 62321-
6: 2015, by solvent extraction and determined by GC-MS and further HPLC-
DAD confirmation when necessary. IEC 62321-6: 2015 Number
: TWNC00660407
(7) ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 12 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Test Item Phthalates Di(2-ethylhexyl) Phthalate
(DEHP)(2-
) Dibutyl Phthalate
(DBP) Benzyl Butyl Phthalate
(BBP) Di-(Iso-Nonyl) Phthalate
(DINP) Di-(Iso-Decyl) Phthalate
(DIDP) Di-(N-Octyl) Phthalate
(DNOP) Diisobutyl Phthalate (DIBP) Di-n-hexyl phthalate (DNHP) Halogen Content Fluorine (F) Chlorine (Cl) Bromine (Br) Iodine (I) Unit ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm Number
: TWNC00660407 Test Method Result
(7)
(8)
(9)
(10) RL With reference to IEC 62321-
8:2017, by solvent extraction and determined by GC-MS. IEC 62321-8:2017 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 ND ND ND ND 50 With reference to EN 14582:2016 by combustion bomb with oxygen and determined by Ion Chromatography. EN 14582:2016 392431 505806 499591 450513 50 ND ND ND ND ND ND ND ND ND ND ND ND 50 50 50 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 13 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Test Item Others Perfluorooctane Sulfonates Including PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE PFOS, PFOSA, N-Me-FOSA, N-Et-FOSA, N-Me-FOSE, N-Et-FOSE Perfluorooctanoic Acid
(PFOA) Unit ppm ppm Number
: TWNC00660407 Test Method
(7) Result
(8)
(9)
(10) RL With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 With reference to CEN/TS 15968:2010, by solvent extraction and determined by LC-MS-MS. CEN/TS 15968:2010 ND ND ND ND 0.01 ND ND ND ND 0.01 Remarks:
= Parts per million based on weight of tested sample = mg/kg ppm ND = Not detected RL = Reporting limit, quantitation limit of analyte in sample Responsibility of Chemist : Pelny Hsiao/ Vita Fu Date Sample Received Test Period RoHS Limit RoHS
: Dec 20, 2017
: Dec 21, 2017 to Jan 03, 2018 Restricted Substances Cadmium (Cd) content Lead (Pb) content Mercury (Hg) content Chromium VI (Cr6+) content Polybrominated Biphenyls (PBBs) Limits 0.01% (100ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) Polybrominated Diphenyl Ethers (PBDEs) Di(2-ethylhexyl) Phthalate (DEHP) (2-) 0.1% (1000ppm) Dibutyl Phthalate (DBP) Benzyl Butyl Phthalate (BBP) Diisobutyl Phthalate (DIBP) The limits were quoted from Annex II of 2011/65/EU and Amendment (EU) 2015/863 for homogeneous material. 2011/65/EU (EU) 2015/863 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 14 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660407 Measurement Flowchart :
Test for Cd/Pb/Hg/Chromium (VI)/PBBs/PBDEs Content RoHS Reference Method : Cd/Pb: IEC 62321-5:2013; Hg: IEC 62321-4:2013+AMD1:2017;
Chromium (VI): IEC 62321-7-1:2015 (boiling water extraction);
Chromium (VI): IEC 62321-7-2:2017 (solvent and alkaline extraction);
PBBs/PBDEs: IEC 62321-6:2015 Cd/Pb/Hg
For different material, digest the sample with appropriate acid*1
*1 Confirm the tested samples are totally dissolved Make up with deionized water Analyzed by ICP-OES ICP-OES Sampling Cr6+
Metal Polymers /
Electronics
50cm2 sample, boiling water extraction 50 Weigh a sample Insoluble/
unknown polymers and electronics
Soluble polymers Cool and filter the extract Add NMP, ultrasonic extraction NMP Add toluene and digestion solution Make up with deionized water and add diphenyl-
carbazide solution Metal Visual observation*2
*2 Alkaline digestion Heat sample in a microwave oven Reaction with DCP DCP Take aqueous phase for DCP reaction DCP PBBs/PBDEs
Weigh sample and add organic solvent By solvent extraction Concentrate the extract and make up with organic solvent Analyzed by GC-MS GC-MS Make up with D.I. water Analyzed by UV-VIS UV-VIS Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 15 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660407 Remark :
*1: List of Appropriate Acid Material Polymers Metals Electronics Acid Added for Digestion HNO3,HCl,HF,H2O2,H3BO3 HNO3,HCl,HF HNO3,HCl,H2O2,HBF4
*2: If sample solution is significantly more intense than 0.13 g/cm2 equivalent comparison standard, Chromium VI would be determined as detected, the result of visual observation is positive. 0.13 g/cm2 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 16 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Sampling For different material, digest the sample with appropriate acid Confirm the tested samples are totally dissolved Make up with deionized water Analyzed by ICP-OES ICP-OES Test Conducted :
Measurement Flowchart :
Test for Heavy Metal (Sb) Content () Reference Method USEPA 3052 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 17 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Sampling Weigh sample and add organic solvent By solvent extraction Analyzed by GC-MS GC-MS Test Conducted :
Measurement Flowchart :
Test for Phthalates Content Reference Method : IEC 62321-8:2017 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 18 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660407 Test Conducted :
Measurement Flowchart :
Test for Halogen Content Reference Method EN 14582 Sampling Add absorbent in a combustion bomb & place weighed sample into sample cup Fill oxygen into the combustion bomb Ignite then leave the bomb at room temperature Transfer the absorbent into a volumetric flask Make up with deionized water Analyzed by Ion Chromatography Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 19 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Measurement Flowchart :
Number
: TWNC00660407 Sampling and add organic solvent Get appropriate weigh or surface of sample Test for Perfluorooctane Sulfonates (PFOS) / Perfluorooctanoic Acid (PFOA) Content /
Reference Method : CEN/TS 15968:2010 Concentrate the extract and make up with Analyzed by LC-MS-MS LC-MS-MS Solvent extraction organic solvent Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 20 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660407 Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 21 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660407 End of Report Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: http://www.intertek-
twn.com/terms/ . Intertek's responsibility and liability are limited to the terms and conditions of the agreement. This report is made solely on the basis of your instructions and / or information and materials supplied by you and provide no warranty on the tested sample(s) be truly representative of the sample source. The report is not intended to be a recommendation for any particular course of action, you are responsible for acting as you see fit on the basis of the report results. Intertek is under no obligation to refer to or report upon any facts or circumstances which are outside the specific instructions received and accepts no responsibility to any parties whatsoever, following the issue of the report, for any matters arising outside the agreed scope of the works. This report does not discharge or release you from your legal obligations and duties to any other person. You are the only one authorized to permit copying or distribution of this report (and then only in its entirety). Any such third parties to whom this report may be circulated rely on the content of the report solely at their own risk. Intertek Testing Services Taiwan Ltd.
*THJ0660407* Page 22 of 22 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Report
: TWNC00660409 Number Date
: Jan 09, 2018
: , , (SILVER-PLATED COPPER CLAD STEEL WIRE, SILVER-PLATED COPPER WIRE, TIN-PLATED COPPER WIRE)
: COPPER/ SILVER-PLATED COPPER CLAD STEEL/ SILVER-PLATED/
Applicant :
WONDERFUL HI-TECH CO., LTD. No.17, Beiyuan Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Sample Description :
One (1) group of submitted samples said to be:
Sample Submitted By Sample Description Style / Item No.
: WONDERFUL HI-TECH CO., LTD. TIN-PLATED
: Dec 20, 2017
: Dec 21, 2017 Date Sample Received Date Test Started Test Conducted :
Conclusion :
Tested Sample Submitted Samples As requested by the applicant, for details please refer to attached pages.
, . Standard Restriction Of Hazardous Substances (RoHS) Test As per applicants request with reference to 2011/65/EU 2011/65/EU Result Pass Tested Components
(1) Coppery metal (Copper)
(2) Silvery metal (Silver-plated copper clad steel)
(3) Silvery metal (Silver-plated)
(4) Silvery metal (Tin-plated) Authorized by:
On Behalf of Intertek Testing Services Taiwan Limited Matt Wang Sr. Manager Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 1 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Number
: TWNC00660409 Test Conducted :
Test Result Summary :
Heavy Metal Test Item Unit Test Method Result
(1)
(2)
(3)
(4) RL Cadmium (Cd) Content ppm ND ND ND ND 2 Lead (Pb) Content ppm ND ND ND ND 2 Mercury (Hg) Content ppm ND ND ND ND 2 With reference to IEC 62321-5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-5: 2013, by microwave or acid digestion and determined by ICP-OES. IEC 62321-5: 2013 With reference to IEC 62321-4: 2013+AMD1:
2017, by microwave or acid digestion and determined by ICP-OES. IEC 62321-4: 2013+A MD1: 2017 With reference to IEC 62321-7-1: 2015, by boiling water extraction and determined by UV-Vis Spectrophotometer or visual observation. IEC 62321-7-1: 2015
Chromium VI (Cr6+) Content
g/
cm2 Negative
(#) Negative Negative Negative 0.10 Remarks:
ppm = Parts per million based on weight of tested sample = mg/kg
ND = Not detected RL = Reporting limit, quantitation limit of analyte in sample
= Due to insufficient sample area, a reduced total sample surface was used and the ratio of total sample surface to extraction volume was kept at 1 cm2 : 1 ml. 1 : 1 Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 2 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Colorimetric result
< 0.10 g/cm2 Qualitative Result Negative 0.10 g/cm2 Inconclusive and 0.13 g/cm2
> 0.13 g/cm2 Positive Number
: TWNC00660409
@ The explanation of Chromium VI (Cr6+) analysis results Explanation The result of sample is negative for Cr(VI). The sample coating is considered a non-
Cr(VI) based coating. The result of sample is considered to be inconclusive. If addition samples are available, recommend to add trials and get the average result for the final determination. The result of sample is positive for Cr(VI). The sample coating is considered to contain Cr(VI). A result expresses as Positive, while not an actual value, which indicates a visual observation was used.
: Dec 20, 2017
: Dec 21, 2017 to Dec 27, 2017 Responsibility of Chemist : Pelny Hsiao Date Sample Received Test Period RoHS Limit RoHS Restricted Substances Cadmium (Cd) content Lead (Pb) content Mercury (Hg) content Chromium VI (Cr6+) content Polybrominated Biphenyls (PBBs) Polybrominated Diphenyl Ethers (PBDEs) Limits 0.01% (100ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) 0.1% (1000ppm) The limits were quoted from Annex II of 2011/65/EU for homogeneous material. 2011/65/EU Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 3 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660409 Measurement Flowchart :
Test For Cd/Pb/Hg/Chromium (VI) Content RoHS Reference Method Cd/Pb: IEC 62321-5:2013; Hg: IEC 62321-4:2013+AMD1:2017;
Chromium (VI): IEC 62321-7-1:2015 (boiling water extraction);
Chromium (VI): IEC 62321-7-2:2017 (solvent and alkaline extraction) Sampling Cd/Pb/Hg
For different material, digest the sample with appropriate acid*1
*1 Confirm the tested samples are totally dissolved Make up with deionized water Analyzed by ICP-OES ICP-OES Cr6+
Metal Polymers /
Electronics
50cm2 sample, boiling water extraction 50 Weigh a sample Insoluble/
unknown polymers and electronics
Soluble polymers Cool and filter the extract Add NMP, ultrasonic extraction NMP Add toluene and digestion solution Make up with deionized water and add diphenyl-
carbazide solution Metal Visual observation*2
*2 Alkaline digestion Heat sample in a microwave oven Reaction with DCP DCP Take aqueous phase for DCP reaction DCP Make up with D.I. water Analyzed by UV-VIS UV-VIS Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 4 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660409 Remarks :
*1: List of Appropriate Acid Material Polymers Metals Electronics Acid Added for Digestion HNO3,HCl,HF,H2O2,H3BO3 HNO3,HCl,HF HNO3,HCl,H2O2,HBF4
*2: If sample solution is significantly more intense than 0.13 g/cm2 equivalent comparison standard, Chromium VI would be determined as detected, the result of visual observation is positive. 0.13 g/cm2 Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 5 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Test Conducted :
Number
: TWNC00660409 End of Report Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: http://www.intertek-
twn.com/terms/ . Intertek's responsibility and liability are limited to the terms and conditions of the agreement. This report is made solely on the basis of your instructions and / or information and materials supplied by you and provide no warranty on the tested sample(s) be truly representative of the sample source. The report is not intended to be a recommendation for any particular course of action, you are responsible for acting as you see fit on the basis of the report results. Intertek is under no obligation to refer to or report upon any facts or circumstances which are outside the specific instructions received and accepts no responsibility to any parties whatsoever, following the issue of the report, for any matters arising outside the agreed scope of the works. This report does not discharge or release you from your legal obligations and duties to any other person. You are the only one authorized to permit copying or distribution of this report (and then only in its entirety). Any such third parties to whom this report may be circulated rely on the content of the report solely at their own risk. Intertek Testing Services Taiwan Ltd.
*THJ0660409* Page 6 of 6 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492 423 8 Tel: (+886-2) 6602-28882797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com
. No. SHAEC1716150902
: 20170731. 1,11.
(). 8
: NEOFLON FEP . SGS :. SP17-026239 - SH .
:. NP-3180.
:. 20170726. 20170726 - 20170731.
(PBBs)
(PBDEs)( (DBP)
(BBP)(2-)(DEHP)(DIBP)) RoHS2011/65/EUII(EU) 2015/863
. Marry Ma. SHAEC1716150901 .. No. SHAEC1716150902
: 20170731. 2,11.
:. SGSID. SN1. SHA17-161509.001 .
(1) 1 mg/kg = 0.0001% .
(2) MDL = .
(3) ND = ( < MDL ).
(4) "-" = . RoHS 2011/65/EUII(EU) 2015/863.
(1) IEC 62321-5:2013 ICP-OES
(2) IEC 62321-5:2013 ICP-OES
(3) IEC 62321-4:2013 ICP-OES
(4) IEC 62321-7-2:2017 UV-Vis/IEC 62321-5:2013ICP-OES
(5) IEC 62321-6:2015 GC-MSPBBs()PBDEs()
(6) IEC 62321-8:2017 GC-MS.
(Cd).
(Pb).
(Hg).
(Cr(VI)).
(PBBs).
(PBDEs). MDL. 001. 100 1000 1000 1000 1000
1000 mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. 2 2 2 8
5 5 5 5 5 5 5 5 5 5
ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND ND
. No. SHAEC1716150902
: 20170731. 3,11.
(DBP).
(BBP).
(2-)(DEHP).
(DIBP).
:. MDL. 001.
1000 1000 1000 1000 mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. 5 5 5 5 5 5 5 5 5 5 50 50 50 50 ND ND ND ND ND ND ND ND ND ND ND ND ND ND
(1) RoHS(EU) 2015/863 IEC 62321 EN 62321 http://www.cenelec.eu/dyn/www/f?p=104:30:1742232870351101::::FSP_ORG_ID,FSP_LANG_ID:125863 7,25
(2) (Cr)ND (Cr(VI))ND (Cr(VI))
(3) (Cr)(Cr(VI))
(4) 201564RoHS(EU) 2015/863 II BBPDBPDEHPDIBP 0.1%
(5) 2021722DEHP, BBP, DBP DIBP
(6) DEHP, BBP, DBP DIBP2019722 2021722
(7) DEHPBBP DBPNo.1907/2006XVII51 DEHPBBP DBP.
:. EN 14582:2007 , IC.. No. SHAEC1716150902
: 20170731. 4,11.
(F).
(Cl).
(Br).
(I).
(Sb). mg/kg. mg/kg. mg/kg. mg/kg. MDL. 001.
>100000 50 50 50 50 ND ND ND
. MDL. 001. mg/kg. 50 ND
:. ASTM D 4004-06(2012). ICP-OES..
(HBCDD).
:. US EPA 3550C: 2007 , GC-MS..
(HBCDD). CAS NO. 25637-99-4, 3194- 55-6. MDL. 001. mg/kg. 10 ND
(SCCP)(C-C).
:. ISO 18219: 2015 , GC-NCl-MS..
(SCCP) (C-C) . MDL. 001. mg/kg. 50 ND
(PFOS)(PFOA). No. SHAEC1716150902
: 20170731. 5,11.
:. US EPA 3550C: 2007. HPLC-MS..
(PFOS)^.
(PFOA).
:. mg/kg. 1000. MDL. 10.
mg/kg. 10. 001. ND. ND.
(1) (EC) No. 850/2004 (EU) No. 757/2010.
(2) ^= PFOS(PFOS), (PFOSA), 2-(N- )
(EtFOSE), N- (MeFOSA), N- (EtFOSA)2-(N-
)(MeFOSE). No. SHAEC1716150902
: 20170731. 6,11. Pb/Cd/Hg/Cr6+/PBBs/PBDEs
ABS/PC/PVC
1) // /
2) ///
3) /
1) /
2) 60C
1,5-
pH 150~160C 1,5-
. No. SHAEC1716150902
: 20170731. 7,11. 1) :
2) :
Phthalates
No. SHAEC1716150902
: 20170731. 8,11. 1) :
2) :
HBCDD
No. SHAEC1716150902
: 20170731. 9,11. 1) :
2) :
Halogen() No. SHAEC1716150902
: 20170731. 10,11. PFOS/PFOA
. 1) :
2) :
:. No. SHAEC1716150902
: 20170731. 11,11. SHAEC1716150902 SHA17-161509.001 . SGS.
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 1 of 9
*CE/2017/11010*
(The following sample(s) was/were submitted and identified by/on behalf of the applicant as)
(Sample Submitted By)
(Sample Description)
(Style/Item No.)
(Sample Receiving Date)
(3M TAIWAN LTD.) 3M TISSUE TAPE 9888T, 9810T, 9815, 1815, 9516, 9183, 9183T, 6408, 9080HL, 9080T, 9448HK 2017/01/06 2017/01/06 TO 2017/01/13
(Testing Period)
(Test Requested)
(1)
(2) RoHS 2011/65/EU Annex II(EU) 2015/863
, DBP, BBP, DEHP, DIBP. (As specified by client, with reference to RoHS 2011/65/EU Annex II and amending Directive (EU) 2015/863 to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs, DBP, BBP, DEHP, DIBP contents in the submitted sample.)
. (Please refer to next pages for the other item(s).)
(Test Results)
(Please refer to next pages). This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 2 of 9
*CE/2017/11010*
(PART NAME)No.1
() (TRANSPARENT TWIN ADHESIVE TAPE (EXCLUDING THE RELEASE PAPER))
(Test Results)
(Test Items)
/ Cadmium (Cd)
/ Lead (Pb)
/ Mercury (Hg)
/ Hexavalent Chromium Cr(VI) mg/kg
/ Halogen
() / Halogen-Fluorine (F)
(CAS No.: 14762-94-8)
() / Halogen-Chlorine (Cl)
(CAS No.: 22537-15-1)
() / Halogen-Bromine (Br)
(CAS No.: 10097-32-2)
() / Halogen-Iodine (I) (CAS No.: 14362-44-8) mg/kg mg/kg mg/kg mg/kg
(MDL)
(Result) No.1 n.d.
(Unit) mg/kg mg/kg mg/kg
(Method) IEC 62321-5 (2013)
. / With reference to IEC 62321-5 (2013) and performed by ICP-AES. IEC 62321-5 (2013)
. / With reference to IEC 62321-5 (2013) and performed by ICP-AES. IEC 62321-4 (2013)
. / With reference to IEC 62321-4 (2013) and performed by ICP-AES. IEC 62321 (2008) - Annex C UV-VIS. / With reference to IEC 62321 (2008) - Annex C and performed by UV-VIS. BS EN 14582 (2007)
. / With reference to BS EN 14582 (2007). Analysis was performed by IC. 2 2 2 2 50 50 50 50 n.d. n.d. n.d. n.d. n.d. n.d. n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 3 of 9
*CE/2017/11010*
(Test Items)
(Unit)
(Method)
(MDL)
(Result)
/ Sum of PBBs
/ Monobromobiphenyl
/ Dibromobiphenyl
/ Tribromobiphenyl
/ Tetrabromobiphenyl
/ Pentabromobiphenyl
/ Hexabromobiphenyl
/ Heptabromobiphenyl
/ Octabromobiphenyl
/ Nonabromobiphenyl
/ Decabromobiphenyl
/ Sum of PBDEs
/ Monobromodiphenyl ether
/ Dibromodiphenyl ether
/ Tribromodiphenyl ether
/ Tetrabromodiphenyl ether
/ Pentabromodiphenyl ether
/ Hexabromodiphenyl ether
/ Heptabromodiphenyl ether
/ Octabromodiphenyl ether
/ Nonabromodiphenyl ether
/ Decabromodiphenyl ether
/ DIBP (Di-isobutyl phthalate) (CAS No.: 84-69-5)
/ DBP (Dibutyl phthalate) (CAS No.: 84-74-2)
/ BBP (Butyl Benzyl phthalate) (CAS No.: 85-68-7) mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg IEC 62321-6 (2015)
/. / With reference to IEC 62321-6 (2015) and performed by GC/MS. IEC 62321-8/CD (2013)
/. / With reference to IEC 62321-8/CD
(2013). Analysis was performed by GC/MS.
5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 50 50 50 No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 4 of 9
*CE/2017/11010*
(Test Items)
(Method)
(2-) / DEHP
(Di- (2-ethylhexyl) phthalate) (CAS No.: 117-81-7)
/ DNOP (Di-n-
octyl phthalate) (CAS No.: 117-84-0)
/ DINP (Di-
isononyl phthalate) (CAS No.: 28553-
12-0; 68515-48-0)
/ DIDP (Di-
isodecyl phthalate) (CAS No.: 26761-
40-0; 68515-49-1)
(Unit) mg/kg mg/kg mg/kg mg/kg
(Note) 1. 2. 3. 4. mg/kg = ppm0.1wt% = 1000ppm n.d. = Not Detected () MDL = Method Detection Limit ()
"-" = Not Regulated () IEC 62321-8/CD (2013)
/. / With reference to IEC 62321-8/CD
(2013). Analysis was performed by GC/MS.
(MDL)
(Result) No.1 n.d. 50 50 50 50 n.d. n.d. n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 5 of 9
*CE/2017/11010*
#flow
/ Analytical flow chart of Heavy Metal These samples were dissolved totally by pre-conditioning method according to below flow chart.Cr6+ test method excluded
/ Technician : JR Wang
/ Supervisor: Troy Chang
/ CuttingPreparation
/ Sample Measurement Pb Cd Hg Cr6+
(Note**)
) / Acid digestion by suitable acid depended on different sample material (as below table)
Microwave digestion with HNO3/HCl/HF
/ Add appropriate amount of digestion reagent
/ Solution
/ Filtration
/ Residue
/ Heat to appropriate temperature to extract
/ ICP-AES 1) / Alkali Fusion 2) / HCl to dissolve
/ Cool, filter digestate through filter
/ Sample Material
Steel, copper, aluminum, solder
/ Glass
Gold, platinum, palladium, ceramic
/ Silver
/ Plastic
/ Others
/ Digestion Acid
Aqua regia, HNO3, HCl, HF, H2O2
, / HNO3/HF
/ Aqua regia
/ HNO3
, , , / H2SO4, H2O2, HNO3, HCl
/ Added appropriate reagent to total digestion
/ Add diphenyl-carbazide for color development
540 nm
/ measure the absorbance at 540 nm by UV-VIS Note** (For IEC 62321) 90~95.
(1) 90~95. / For non-metallic material, add alkaline digestion reagent and heat to
(2) . / For metallic material, add pure water and heat to boiling. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 6 of 9
*CE/2017/11010*
/ / Analytical flow chart - PBB/PBDE
/ Technician: Yaling Tu
/ Supervisor: Troy Chang
/ First testing process
/ Optional screen process
/ Confirmation process Sample /
Sample pretreatment /
Screen analysis /
Sample extraction /
Soxhlet method Concentrate/Dilute Extracted solution
Filter /
Analysis by GC/MS /
Issue Report This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 7 of 9
*CE/2017/11010*
/ Analytical flow chart - Phthalate
/ Technician: Andy Shu
/ Supervisor : Troy Chang
/Test method: IEC 62321-8
Sample pretreatment/separation THF /
Sample dissolved/extracted by THF
Dilute Extracted solution
Analysis was performed by GC/MS
/ Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 8 of 9
*CE/2017/11010*
/ Analytical flow chart - Halogen
/ Technician: Rita Chen
/ Supervisor: Troy Chang
Sample pretreatment/separation
Weighting and putting sample in cell
Oxygen Bomb Combustion / Absorption
Dilution to fixed volume
Analysis was performed by IC This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
(No.) : CE/2017/11010 Test Report 3M TAIWAN LTD. 80066 NO. 66, LANE 800, CHUNG-SHAN S. RD., YANG-MEI DISTRICT, TAOYUAN CITY 326, TAIWAN (R. O. C.)
(Date) : 2017/01/13
(Page): 9 of 9
*CE/2017/11010*
(The tested sample / part is marked by an arrow if it's shown on the photo.)
** (End of Report) **
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of clients instruction, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /25 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group
GH&&I*J)K&LM)*>)K&*HK)*
123456789: ;89 <1=
%&()* +,-,./-0
%>> -,?<1@A-B-C@CA/-0B-DBEF?@F/,0A/-BF01@F/B+/-
I)NIOPK>)*>>*H>PQN*GPG)&HHG(&*
RSTU
EZ[\-Z
RSab
\e fgTU VWXY
]/FE]^B-_/FAB-C cd
/^ hij
,0,mB- CF<@CF<1@CF<@<
\ltk^etuBteZklt CF<@CF<1@CF<@< RSvwxy
.kel\ nopqrs
EZ[\^ulz{Dk RS}~xy Fkltel{
O>
|?? Du?@|
|??<|?? Du?@|kDu?@|
noRS{]
eBD~
/[ull{u\ltk@kkk{@{ZlZ{@
.eue]@]z\tkeZlZeB@\eZltk{ l[t\@\eZltk{Dl[t\keDltk
Zlkk{Z[\?
p
G>O&LM\eek\\'lt[?
} Fk{
/[[ez{
Etleeke.te
~S}~`
^zl'{
x y
Dk
-?F||||1
,-./0-./ 8-0/09:;9-0/
<-=/>?@;?A-=/
! 1234055 1234055
12B4055 12M24MNO P 1234055QRSE
()*#+$% 1267 1267 1267 CDE-?-F1// TU
=GHIJKL?9:;9-?-F1// 12M24MJ0O WF2F:XO1267
?0K?9:JK:JVKIL?9:;9.A 1234055 YZ[\-]]X/
IA.?9:JK0]:^LJAIX-]]X/ YZ\a-]bX/
IA.?9:JK0b:^LJAIKL?X-]bX/ 1243 _2>7 1243 _2>7
c$%
,-./0-./ 8-0/09:;9-0/
<-=/>?@;?A-=/ CDE-?-F1//
=GHIJKL?9:;9-?-F1//
c
de f5b5 f5b5 f5b5 f5b5
9Og
9Og
9Og
9Og
)%*+!,-./,0-*%")//#
1234 56789:;<=6>? F234 B;7897;<=6>? G234 H8;7897;<=6>? I234 HJ87897;<=6>? K234 6J7897;<=6>? L234 MN7897;<=6>? O234 M<J7897;<=6>? P234 QRJ7897;<=6>? S234 @67897;<=6>? T234 BR7897;<=6>?
12F4V 56789:;<=6>?J=8 F2F4V B;7897;<=6>?J=8 G2F4V H8;7897;<=6>?J=8 I2F4V HJ87897;<=6>?J=8 K2F4V 6J7897;<=6>?J=8 L2F4V MN7897;<=6>?J=8 O2F4V M<J7897;<=6>?J=8 P2F4V QRJ7897;<=6>?J=8 S2F4V @67897;<=6>?J=8 T2F4V BR7897;<=6>?J=8
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA
@ABA C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE C9DE
)%*+!,-.,0-*%U0")/U# W
XYZ[\]^_
.!%W).a,,- ?8?bbJ86b<86J=Jcb=8;6E7?Jd7
e f f g
!.we 0.!%"#0.+-,%x.%%*y(.fz.!,$!f&a$* c@ABAhijklmnopjkqr c9DEh<<9hstuv1
{5Bh5J=:BJRJ;6;9;J c@ABAh@JBJRJ:l|5Br
" # $% #&% #&%()# $%*&)+,-+#&%*&.+,-+#&% 456789:;
<=>?@ABCDABE=F
=CG??B
HIJKLM NDDD=?F=COCF JK67 P=?FF>?@AB
TUVWXYWZ Y[\]^_ tu v?=Db PON?>=CW NBaB=Sb?=CW NE=DP=??BbF=C QR S=BFOF=C T fghe mnopq9 ij NCBkDl fghe rabAs=F> D=C=kDsFO
/ #01%2!-3#01% 4567wxyJK9:z
<=>?@ABCDABE=F=C
@=EOsGD=?F=CG??B HIJKLM NDDD=?F=COCF
{xyJK|zJK67 P=?F?@AB=C@=EOsG D=?F=CGC TXYWZY[\
]^_ NBaB=Sb?=CW NE=DP=??BbF=C tu v?=Db QR S=BFOF=C T fghe mnopq9 ij NCBkDl fghe rabAs=F> D=C=kDsFO
cd eBbF=C cd eBbF=C
!"!#$%%&()(*+",-./-!"!#$%% 9:;<nToV ABCDEFGHIFGJBK BHZDDG pqrst iIIIBDKBHXHK rs;< uBDKKCDEFG
vpwtQR iIIKDKDG[KBH
xyQR Fz{ iI|[DKKCFzZG[
KCDG[KBH
GHIBGKX
xyQR Fz{ iI|[DKKCFzZG[
KCDG[KBH
]aT b\[FcBKC IBHBkIcKX
] eBDgh iHGjkILjeBD
!122%
!1234% 1*56-.+(72.,+5*!122%81*56-.+(73.,+5*4,!1234%
9:;<=>?@ ABCDEFGHI FGJBKBHKCBELG
]^_QOP
YKXJKIcBKC
XHBJDGZHK lmOPR
HJHKXKKCYKXJK
] debfgh iHGjkILjdebf
]^_QaT b\[FcBKC
XHBJDGZHK MNOPQRST:UV WXHDXKCYKXJKBHK ZG[EKXBJGD\
0
+++012)2$+++ 34,-56789:;<=>?,-@5ABC,-34.DEFG4 HIJKL MN OPQRBSTUVWXC,-J
M#$&$2)2$Y&Z$Y[0*\]Y$#^$#&Y0$_201&)ZY*Y1&$()aM#2&_*$%&&#]0Y0$#Y& 2)2$220*\$$#&()*%&$&$1abY$#_$]2Y$$0))2[*MNc$#Y&2)2$Z0d$^ 2)21_Z1eZ)$Y0_**a
1 2 3 4 | Declaration | Cover Letter(s) | 295.74 KiB | December 18 2020 / December 23 2020 |
ATEQ INSTRUMENTS (ASIA)PTE LTD. TAIWAN BRANCH (SINGAPORE) NO.3, LANE 223, SAN JIA DONG STREET, 40642, TAICHUNG, TAIWAN Declaration Model number: XXX66XXX, XXX67XXX (X=A-Z, 0-9 or blank) The x in model number is representing different market segmentation. Signature te ;
Contact person: Roger Biril>s t Position: R/D Manager . Date: November 11, 2020.
1 2 3 4 | Declaration of authorization | Cover Letter(s) | 315.55 KiB | December 18 2020 / December 23 2020 |
ATEQ INSTRUMENTS (ASIA) PTE LTD. TAIWAN BRANCH (SINGAPORE) Declaration of Authorization We Name: ATEQ INSTRUMENTS (ASIA)PTE LTD. TAIWAN BRANCH (SINGAPORE) Address: NO.3, LANE223, SAN JIA DONG STREET, 40642, City: TAICHUNG, Country: TAIWAN Declare that:
Name Representative of agent: Rita Lin Agent Company name: Worldwide Testing Services (Taiwan) Co., Ltd Address: 6F., No. 58, Lane 188, Ruey Kuang Road, Neihu, City: Taipei 114 Country Taiwan is authorized to apply for Certification of the following product(s):
Product description: TPMS TOOL Type designation: | XXX66XXX, XXX67XXX (X=A-Z, 0-9 or blank) Trademark: ATEQ Validity/ expiry date on our behalf. Date: 2020/09/01 City: Taichung, Taiwan Name: Roger LIN ?
Function: R/D Manager Signature:
Re Notes: Pe
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 3 4 | Test Report SAR Appendix A | RF Exposure Info | 264.59 KiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix B | RF Exposure Info | 263.36 KiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix C 1 | RF Exposure Info | 4.77 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix C 2 | RF Exposure Info | 4.99 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix C 3 | RF Exposure Info | 5.24 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix C 4 | RF Exposure Info | 5.22 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Report SAR Appendix C 5 | RF Exposure Info | 1.87 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Setup Photos NII | Test Setup Photos | 1.75 MiB | December 18 2020 / December 23 2020 |
1 2 3 4 | Test Setup Photos SAR | Test Setup Photos | 126.67 KiB | December 18 2020 / December 23 2020 |
1 2 3 4 | confidentiality | Cover Letter(s) | 457.14 KiB | December 18 2020 / December 23 2020 |
FCC, Request for non-disclosure Date: 01-Sep-2020 RF_501, Issue 8 Page 1 of 1 Company Name: ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE) Address: NO.3, LANE223, SAN JIA DONG STREET, 40642, City: TAICHUNG, Country: TAIWAN To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2ANR7-VT66 Reference number: ##H#H+#+
eee, Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
L] Bill(s) of Material XX] Block Diagrams XX] Operational Description EX] Schematic Diagrams [_] Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. eee 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):
_] Internal Photos [_] Users Manual L] Test Set-up Photos [-] External Photos Justification:
Date: 2020-09-01 Name and signature of applicant: Roger LIN (204 I L
\ | I Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
The planned date should stated in the RF731 application form. J 3) FCC must be informed when marketing begins earlier. }
4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period ;
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-23 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2020-12-23
|
||||
1 2 3 4 | Applicant's complete, legal business name |
ATEQ INSTRUMENTS (ASIA) PTE LTD.TAIWAN BRANCH (SINGAPORE)
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0026840801
|
||||
1 2 3 4 | Physical Address |
3 LANE223, SAN JIA DONG STREET, 40642, TAICHUNG
|
||||
1 2 3 4 |
Taichung, N/A
|
|||||
1 2 3 4 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
2ANR7
|
||||
1 2 3 4 | Equipment Product Code |
VT66
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
R**** L********
|
||||
1 2 3 4 | Telephone Number |
+886 ******** Extension:
|
||||
1 2 3 4 | Fax Number |
+886 ********
|
||||
1 2 3 4 |
r******@ateq.com.tw
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
D****** S********
|
||||
1 2 3 4 | Physical Address |
6F., No.58, Lane 188, Ruey Kuand Rd.
|
||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
886-2********
|
||||
1 2 3 4 | Fax Number |
886-2********
|
||||
1 2 3 4 |
d******@wts-lab.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
R****** L********
|
||||
1 2 3 4 | Physical Address |
6F., No.58, Lane 188, Ruey Kuand Rd.
|
||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
886-2********
|
||||
1 2 3 4 | Fax Number |
886-2********
|
||||
1 2 3 4 |
r******@wts-lab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | TPMS TOOL | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power output listed is conducted. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR for body exposure condition is 1.12 W/kg. | ||||
1 2 3 4 | Power output listed is conducted. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR for body exposure condition is < 0.1 W/kg. This device has a 20/40 MHz bandwidth mode. | |||||
1 2 3 4 | Power output listed is conducted. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
D******** S********
|
||||
1 2 3 4 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 4 | Fax Number |
886-2********
|
||||
1 2 3 4 |
d******@wts-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.02 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5745 | 5825 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.0023 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2412 | 2462 | 0.042 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.0023 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 902.75 | 927.25 | 0.01 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 0.12500000 | 0.12500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC