Vivitar Innite BS-C26 Bluetooth Speaker User Guide Thank you for purchasing the Vivitar Innite BS-C26 Bluetooth Speaker. Introduction With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth technology. Easily connect to any mobile device for both conversation and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR specication and HSP, HFP, A2DP and AVRCP proles). Specications Bluetooth Specication: V2.1+EDR Operation Frequency: 2.402-2.48GHz Supported Prole: HSP, HFP, A2DP, AVRCP Operation Range: Up to 33 feet (10 meters) Talk Time: 4 hours Play Time: 2 hours Standby Time: 15 hours Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery Charge Time: 3 Hours In the Box BS-C26 Bluetooth Speaker USB Charging Cable User Manual Safety Precautions Please read this User Manual carefully and follow all instructions. To avoid damage or malfunction of the speaker do not drop it from high locations and/or on to hard surfaces, do not place heavy objects on it. Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this may cause an electrical shock, explosion and damage to the device or to the user. Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce battery life. Do not modify, repair or disassemble device (especially the battery). Doing so will void the warranty. The battery in this device may present a risk of re or chemical burns if misused or tampered with. Use only supplied and manufacturer-approved chargers and unplug this device when not in use for long periods of time or during lightning storms. FCC and IC Statement Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modications to this equipment. Such modications could void the user's authority to operate the equipment. EC Declaration of Conformity Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modications to this equipment. Such modications could void the user's authority to operate the equipment. This product is CE certied according to the provision of the R&TTE Directive (99/5/EC). This declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland. Location of Controls (Drawing FPO) Charging Port Microphone Play / Pause / Answer Auxiliary Port Indicator LED ON/OFF Top Battery Information The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging-discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time. Disconnect the BS-C26 from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important: Ensure that the battery is fully charged if you do not use the device for a long period of time. To avoid a complete discharge of the battery, the BS-C26 should be charged at least once every 6 months. Charging Your Speaker The BS-C26 speaker is powered by an internal rechargeable battery. Charge the battery completely before its rst use. Read the section titled "Battery information" in this manual before starting the charging process. 1. Connect one end of the included USB Charging Cable to your speaker's charging port. 2. Connect the other end of the USB Charging Cable to a USB port. 3. When your speaker is charging, the red LED indicator light will turn red. The battery will take approximately three hours to fully charge 4. When the battery is fully charged, the LED indicator light will turn o. Disconnect the charging cable from your speaker and the outlet. Your speaker is ready to use. NOTES:
- Give your speaker a full charge before using for the rst time.
- When the battery power is low, the indicator light will turn red and start to ash. Turning ON Your Speaker Before you can start using your speaker, you must rst charge the rechargeable battery. Once charged, slide the ON/OFF switch to the ON position to power on your speaker. If your speaker completed the pairing process successfully, when the speaker is turned on, it will connect to the phone you last connected to automatically. Please ensure your phone's Bluetooth function is active. Turning OFF Your Speaker Slide the ON/OFF Switch to the OFF position to power down your device. Note: To conserve power, if your speaker is not connected to a device for approximately about 10 minutes, it will turn o automatically. You should toggle the power switch again to turn on the speaker. ON/OFF ON/OFF Top Top Pairing Your Speaker to a Bluetooth Phone Before you use your speaker the rst time, you must pair it with a Bluetooth enabled mobile phone. Pairing is a one time process and required only for the rst connection with the Bluetooth enabled mobile phone. 1. Keep the BS-C26 within one meter range of a Bluetooth enabled mobile phone. 2. Slide the ON/OFF Switch to the ON position. The LED indicator light on your speaker will illuminate, ashing red and blue alternately. The device is now in pairing mode. 3. Find the Bluetooth setting of your mobile phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your mobile phone). 4. From the list of devices found, select your speaker "Vivitar SP". 5. If required, enter the PIN code "0000" and conrm the entry. Once the pairing process was successful, the BS-C26 will connect to your mobile phone automatically then switch to standby mode. Note: -If pairing is not completed within 10 minutes, the speaker will turn o. If this happens, please repeat the pairing steps. Play/Pause Listening to Music on Your Speaker Play/Pause Press the Play/Pause button to get music from your audio source to play or pause. External Audio Input The BS-C26 has an AUX-IN port which can be used to connect an additional audio source using the 3.5mm Auxiliary Cable. When an audio source is plugged in using the 3.5mm Auxiliary Cable, any music playing on your speaker will pause and music playing from the plugged in audio source will play instead. Note: The BS-C26 supports the A2DP prole which allows stereo music to stream from a Top Bluetooth phone. The music will pause automatically if a call is incoming, and resume when the call has ended. Using Your Speaker during a Phone Call Last number re-dialing Double press the Answer button, the last number you dialed will be redialed. Answering a call Press the Answer button to answer an incoming call. Ending a call Press the Answer button to end a call. Microphone Answer Top Warranty Information This warranty is non-transferable and is limited only to the original purchaser. The conditions of this warranty and supplier's responsibilities under this warranty are as follows:
You must be able to prove the date of original purchase of the unit with a dated receipt. The warranty is not applicable if the product has been subject to physical abuse, improper installation, modication or repair by an unauthorized third party. Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion. Specically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modication. Modication and repair of the unit should be done by an authorized and qualied service center or returned to the manufacturer. This warranty gives you specic legal rights, and you may also have other rights, which vary under local laws. What is Covered This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase. What is NOT Covered Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modication or accidents. Service and Returns When returning a defective product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale. 2. A detailed written description of the problem. 3. Your return address and telephone number (Daytime). Where to send defective products United States Sakar International Return faulty device to the Attention: Service Department Attention: Service Department Refund Counter at the store 195 Carter Drive Edison, NJ 08817 2D, Siskin Parkway East 4020 Middlemarch Business Park purchased. Coventry, CV3 4PE United Kingdom / Europe Australia Sakar International where the product was Technical Support For technical support issues, visit our website at www.vivitar.com. Manuals, software and FAQs are available on line. If you cant nd what you are looking for, e-mail us at support@vivitar.com where one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone: 0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be found at:
www.vivitar.com.