Vivitar VZ60023BT Bluetooth Speaker User Guide Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modications to this equipment. Such modications could void the user's authority to operate the equipment. Thank you for purchasing the Vivitar VZ60023BT Bluetooth Speaker. Introduction With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth technology. Easily connect to any mobile device for both conversation and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V3.0+EDR specication and HSP, HFP, A2DP and AVRCP proles). Specications Bluetooth Specication: V3.0+EDR Operation Frequency: 2.402-2.48GHz Supported Prole: HSP, HFP, A2DP, AVRCP Operation Range: Up to 33 feet(10 meters) Rated Input: 5V 500mA Battery Type: 1000mAh, 3.7V, Polymer Lithium Ion Battery In the Box VZ60023BT Bluetooth Speaker USB Charging Cable User Manual Safety Precautions Please read this User Manual carefully and follow all instructions. To avoid damage or malfunction of the speaker do not drop it from high locations and/or on to hard surfaces, do not place heavy objects on it. Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this may cause an electrical shock, explosion and damage to the device or to the user. Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce battery life. Do not modify, repair or disassemble device (especially the battery). Doing so will void the warranty. The battery in this device may present a risk of re or chemical burns if misused or tampered with. Use only supplied and manufacturer-approved chargers and unplug this device when not in use for long periods of time or during lightning storms. FCC Statement This device complies with part 15 of the FCC rules, operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Location of Controls Microphone Indicator LED Previous Track / Volume Power / Play / Pause / Answer Next Track / Volume +
Charging Port Front Back First Time Use Charging the Battery The VZ60023BT Speaker has a built-in, rechargeable lithium-polymer battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is achieved after two or three charging-discharging cycles. Charge the battery fully before rst use. 1. Connect the USB cable to the speaker. 2. Connect to the correct outlet (wall, computer, car charger). 3. When the charger is connected to the speaker, the red indicator light will turn on. Note: Charging the battery fully may take up to 2 hours. 4. When the battery is fully charged, the red indicator light will turn o. Disconnect the charger from the speaker and the outlet. The speaker is ready for use. Note: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it is not used on a regular basis. Important!
Ensure that the battery is fully charged if the speaker is not used for a long period of time. To avoid a complete discharge of the battery, charge the speaker at least every six(6) months. Battery Notes A fully charged battery provides up to six(6) hours of talk-time, four(4) hours music playback, and up to ten(10) hours of standby time. Talk and standby times vary depending on mobile phones or other compatible Bluetooth devices, settings, styles, etc. When the battery power is low, the speaker will beep every 30 seconds. When using with your iPhone, an additional battery meter feature will display the remaining battery on your phones touch screen. Pairing with your Phone 1. Place the speaker in close range of a Bluetooth-enabled mobile phone. 2. Press and hold POWER button for three(3) seconds. Until indicator lights ash blue and red. 3. Set your mobile phone to pairing mode (as explained in operating instructions for your phone) and search for Bluetooth devices. 4. Select "Acrylic speaker" from the list shown on your phone. 5. If requested, enter the PIN code "0000" and conrm the entry. Once the pairing is successful, the VZ60023BT connects to your phone automatically before switching to standby mode. The indicator will blink blue once every four(4) seconds. Note: If pairing is not completed within ten(10) minutes, the speaker will turn o. If this happens, repeat the pairing steps above. General Operation Turning ON/OFF 1. Press and hold the POWER button for three(3) seconds to turn the speaker ON. If pairing was successful (instructions above), the speaker will remain paired to your mobile device. 2. Press and hold the POWER button for ve(5) seconds to turn the speaker OFF. Note: The speaker will turn OFF automatically when not connected to a mobile device for approximately ten(10) minutes. Music Playback Play/Pause button: Press to play or pause music playback. Double press to switch the LED mode when playing music. Next Track / Volume + button: Press to increase sound level. Press and hold to skip to the next track. Previous Track / Volume - button: Press to decrease the sound level. Press and hold to return to the previous track. Next Track / Volume +
Next Track / Volume +
Power / Play / Pause /
Power / Play / Pause /
Answer / Switch LED Mode Answer / Switch LED Mode Microphone Previous Track / Volume Using the Phone Function In standby mode, press the ANSWER button twice to re-dial the last number called. Answering a Call: Short press the ANSWER button to answer an incoming call. Reject an Incoming Call: Press and hold the ANSWER button for two(2) seconds to reject an incoming call. Transferring a Call: Press and hold Next Track / Volume + button for two(2) seconds to transfer a call from the phone to speaker. Ending a Call: Short Press the ANSWER button to end a call. Warranty Information This warranty is non-transferable and is limited only to the original purchaser. The conditions of this warranty and supplier's responsibilities under this warranty are as follows:
You must be able to prove the date of original purchase of the unit with a dated receipt. The warranty is not applicable if the product has been subject to physical abuse, improper installation, modication or repair by an unauthorized third party. Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion. Specically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized Modication and repair of the unit should be done by an authorized and qualied service center This warranty gives you specic legal rights, and you may also have other rights, which vary under repair, or modication. or returned to the manufacturer. local laws. What is Covered This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase. What is NOT Covered Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modication or accidents. Service and Returns When returning a defective product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale. 2. A detailed written description of the problem. 3. Your return address and telephone number (Daytime). Where to send defective products United States Australia Sakar International Return faulty device to the Attention: Service Department Attention: Service Department Refund Counter at the store 195 Carter Drive Edison, NJ 08817 Technical Support For technical support issues, visit our website at www.vivitar.com. Manuals, software and FAQ's are available on line. If you cant nd what you are looking for, e-mail us at support@vivitar.com where one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone:
0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be found at: www.vivitar.com. 2D, Siskin Parkway East 4020 Middlemarch Business Park purchased. Coventry, CV3 4SU United Kingdom / Europe Sakar International where the product was