1-Piece (AT1) Offender User Guide 1-Piece (AT1) Offender User Guide 1-Piece (AT1) Offender User Guide March 4, 2019 2 Copyright 2019 Attenti. All rights reserved. 1-Piece (AT1) Offender User Guide No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Attenti. The information in this document is subject to change without notice. The software mentioned in this document is furnished under license and may only be used or copied in accordance with the terms of such license. Contact software manufacturers directly for terms of software licenses for any software mentioned in this document not originating from Attenti. All brand or product names are the trademarks or registered trademarks of their respective holders. 3 SAFETY INFORMATION 1-Piece (AT1) Offender User Guide Please read, understand, and follow all safety information contained in these instructions prior to the use of this Attenti device. Retain these instructions for future reference. Intended Use:
This Attenti device is part of an electronic monitoring system, which performs data transfer using cellular and Wi-Fi networks to a monitoring platform. This device has not been tested for and is not intended for use on airplanes, in hazardous environments, in healthcare facilities, or where cellular phones or other intentional transmitters are restricted. Explanation of Signal Word Consequences WARNING: Indicates a hazardous situation which, if not avoided, could result in serious injury or death CAUTION:
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury and/or property damage. NOTICE:
Indicates a situation which, if not avoided, could result in property damage. Safety information for Trained Customer (e.g., officer, agency representative, ministry of justice) and Offender. WARNING Avoid placing a device next to an implanted electronic device (e.g., dont carry the device in a shirt or jacket pocket directly near an implanted device). To reduce the risks associated with fire or explosion:
- Do not intentionally open or damage the device.
- Do not enter areas with potentially explosive atmosphere. Potentially explosive areas are often, but not always, clearly marked. To reduce the risks associated with hazardous voltage:
- Do not modify AC/DC power adapter plug.
- Do not force the power plug into an outlet where it does not fit.
- Use only an Attenti provided power adapter to recharge or power the device. 4 1-Piece (AT1) Offender User Guide
- Do not unplug AC/DC adapter by power cord. Handle the adapter by the body only.
- Do not modify, decorate, or attempt to service the device. Return to Attenti authorized personnel or location for repair or service. There are no user serviceable parts.
- Do not attempt to charge the device using an outdoor outlet. Only use the AC/DC adapter indoors.
- Do not expose power adapter to rain, steam or wet conditions. CAUTION To reduce the risks associated with hot surfaces:
- Do not touch thermal pads on device or charger if charging is interrupted. Safety information for Trained Customer only. WARNING To reduce the risks associated with fire or explosion:
- Do not attempt to access or replace battery. Battery is not user-replaceable. The device shall be opened by Attenti authorized service only.
- Ensure storage temperature of device is within the range as specified in device manual. CAUTION To reduce the risks associated with sharp points:
- Use caution when handling pin trays. Safety information for Offender only. WARNING To reduce the risks associated with fire or explosion:
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- Do not use device outside of the operation temperature range specified in device manual. Contact the agency representative from which you are monitored to get operation temperature range. To reduce the risks associated with hazardous voltage:
-
If the device or power cord becomes damaged, contact the agency representative from which you are monitored. NOTICE Only authorized personnel can turn off or remove the device. 5 Responding to Vibrations/Flashing LEDs 1-Piece (AT1) Offender User Guide The device will vibrate three consecutive times if an alarm has been generated. View the flashing LED(s) on the top of the device and follow the below steps to clear the alarm. Red PWR The device battery is low. Connect the device to the charger. Once the device is fully charged, it will vibrate once and the PWR LED will be solid green. Disconnect the device from the charger. Note: The 1-Piece must be charged for a minimum of 2 hours per day. Red GPS The device has lost GPS. Walk outside with the device uncovered and ensure that you are in an area with a clear view of the sky (do not stand under trees, building awnings, etc.). When the device reacquires GPS, the GPS LED will stop blinking. Red Zone You are either in a forbidden area (for instance, a school zone) or not in a location where you are scheduled to be (for instance, work). If you are in a forbidden area, leave the area immediately. If you are not in the scheduled location, travel to that area as quickly as possible. When the alarm has cleared, the Zone LED will stop blinking. Red PWR, GPS, ZONE Your officer has sent an alert requesting that you contact them as soon as possible. Press the Acknowledge button on the top of the device. The PWR, GPS, and ZONE LEDs will stop flashing. 6 1-Piece (AT1) Offender User Guide FCC and Industry Canada Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device is to be used solely by law enforcement agencies for tracking purposes and must be professionally installed. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the U.S. Federal Communications Commission
(FCC) rules and Industry Canadas license-exempt RSS Gen and RSS 210 Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme avec la norme RSS-Gen d'Industrie Canada exempte de licence. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil peut causer des interfrences, et (2) cet appareil doit accepter toute interfrence, y compris celles pouvant provoquer un fonctionnement indsirable de l'appareil Industry Canada ICES-003 Compliance Label: CAN ICES-3 B/NMB-3 B 7 1-Piece (AT1) Offender User Guide Exposure to Radio Frequency (RF) Energy:
This monitor contains radio transmitters and has been designed, manufactured and tested to meet the Federal Communications Commission (FCC) and Industry Canada guidelines for RF exposure and Specific Absorption Rate when used in ankle worn configuration with an Attenti bracelet designated for this product. The use of accessories not approved by Attenti may cause your device to malfunction or in the case of unapproved electrical accessories may cause the device to exceed RF energy exposure guidelines. Additional information about RF safety can be found on the FCC website at http://www.fcc.gov/oet/rfsafety and the Industry Canada website at http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html. Modifications to this device shall not be made without the written consent of Attenti. Unauthorized modifications may void the authority granted under Federal Communication Rules and Industry Canada Rules permitting the operation of this device. 8