Attenti Home Curfew RF 3000
(LTE) Monitoring System User Guide Document Name Here Attenti Home Curfew RF 3000
(LTE) Monitoring System User Guide February 13, 2020 2 Copyright 2020 Attenti. All rights reserved. Document Name Here No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Attenti. The information in this document is subject to change without notice. The software mentioned in this document is furnished under license and may only be used or copied in accordance with the terms of such license. Contact software manufacturers directly for terms of software licenses for any software mentioned in this document not originating from Attenti. All brand or product names are the trademarks or registered trademarks of their respective holders. 3 Base Unit 3000 Buttons Document Name Here Answer: To answer a call, pick up the handset and press the Answer button. Hang Up: When the call is complete, press the Hang Up button. Call: To call the Dialout Number, which can be found in the Device Parameters, press the Call button. 911: In case of emergency, the Base Unit 3000 can dial 9-1-1. To dial 9-1-1, press and hold the Hang Up and Call buttons until all LEDS blink red. 4 Document Name Here Instructions concerning human exposure to radio frequency electromagnetic fields. To comply with FCC Section 1.307 (b)(1) for human exposure to radio frequency electromagnetic fields, implement the following instruction:
A distance of at least 20cm. between the equipment and all persons should be maintained during the operation of the equipment. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Canada Note: CAN ICES-3 B/NMB-3 B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme avec la norme RSS-210 d'Industrie Canada exempte de licence. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil peut causer des interfrences, et (2) cet appareil doit accepter toute interfrence, y compris celles pouvant provoquer un fonctionnement indsirable de l'appareil. Note: Modifications to this device shall not be made without the written consent of Attenti. Unauthorized modifications may void the authority granted under Federal Communication Rules and Industry Canada Rules permitting the operation of this device. 5