FCC ID: 2ATIH-EPM1PRO Earphone

80*80mm,80g Model: EP-M1 Pro AUKEYTechnologyCo.,Ltd. www.aukey.com | support@aukey.com Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong, P.R.China FCC ID: 2ATIH-EPM1PRO Designed by AUKEY AUKEY EP-M1 Pro USER MANUAL Thank you for purchasing the AUKEY EP-M1 Pro True Wireless Stereo Specifications earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. Please charge the earbuds and the charging case for at least 15 minutes Battery life LISTENING COMFORT Select the right size of ear-tip PRODUCT DETAILS before first use. BATTERY LIFE AND CHARGING PLAYBACK CONTROLS In the Box Earbuds USB-C Charging Cable Charging Case User Manual Ear-tips Bluetooth Protocol A2DP / AVRCP/HSP/ HFP Product Number Bluetooth Version Charging Time Battery Life Earphones Impedance Maximum Output Power EP-M1 Pro 5.0 2h 32 5mW 30h (with case) 5h (buds only) Frequency Range 20Hz-20KHz Microphone Sensitivity

-42dB@1KHz Battery Capacity Bluetooth Effective Distance Product Weight Charging Voltage 500mAh 10m 35g DC 5V Choose the ear-tip with the most comfortable fit and best seal. To change an ear-tip, gently pull it off from the earbud and press on the new one. In Bluetooth mode the buds can last for 5 hours of continuous play. Using the charging case, this can be extended to 30 hours. Charging the earbuds Place the earbuds in the charging case then close the charging case,they will automatically shut down and begin charging. Charging the charging case LED Indicator Multi-Function Touch Panel LED Charging Indicator USB-C Charging Port Wearing the Earbuds Gently insert the earbuds into the ear and adjust to a comfortable position by rotating them. R is for the right ear, and L for the left. Left ear Right ear Touch Control Music Play/Pause Tap Tap ANC ON /OFF Long-press 2s Long-press 2s Next Track Double-tap Double-tap Answer Hang Up Tap Tap Long-press 2s Long-press 2s Decline Call Long-press 2s Long-press 2s Activate Voice Assistant Triple-tap Triple-tap

- 01 -

- 02 -

- 03 -

- 04 -

- 05 -

- 06 -

AUTOMATIC CONNECTION Pairing:

1. Turn on the Bluetooth of your mobile phone 4. Place the earbuds in the charging case then close the charging 2. Use electronic equipment with caution during thunderstorms. Changes or modifications not expressly approved by the party responsible for case,they will automatically shut down and begin charging. 3. This product contains small parts which could cause harm if swallowed. compliance could void the user's authority to operate the equipment. 5. If the Bluetooth connection is lost, they will automatically begin Keep out of the reach of children. NOTE: This equipment has been tested and found to comply with the limits for FCC RF EXPOSURE STATEMENT:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4. Using the earbuds for a long time at high volume may affect your a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are hearing. Make sure to use an appropriate level of volume. designed to provide reasonable protection against harmful interference in a 2. Open the charging case, they will automatically turn on and enter the pairing state. 3. Turn on the pairing function on the device to be paired with the earbuds 4. From the list of available devices Find and select "AUKEY RP-M1 Pro"

from the list of available devices. 5. If a code or PIN code is required for pairing, please enter "0000"

pairing. NOTE:

Automatic remote connection 1. When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found. 2. Forced pairing, 5 tap on either side of the touch button, disconnect the current Bluetooth connection, re-enter the pairing mode, the blue light quickly flashes. if no devices are paired. If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again. The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps. SAFETY INSTRUCTIONS 1. Do not place the earbuds in extremely high or low ambient temperatures to deform. 3.In pairing mode, the earbuds will automatically turn off after 5 minutes for an extended period of time. Extreme temperatures will cause the device BATTERY WARNING This product contains a lithium battery. Please do not disassemble, strike, crush, or place the product into contact with flames. Do not expose to high temperatures or direct sunlight for a prolonged period. If there is any swelling, leakage, odor, or any other abnormality in the battery compartment of the product, cease use immediately. Please dispose of used batteries properly and in accordance with local regulations. READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

- 09 -

residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. CAUTION!

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the However, there is no guarantee that interference will not occur in a particular equipment. installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and ISEDC STATEMENT on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which

(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le prsent appareil est the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. conforme aux CNR d Innovation, This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the ISEDC RF EXPOSURE STATEMENT:

The device is compliance with RF exposure guidelines, users can obtain following two conditions: (1) this device may not cause interference, and Canadian information on RF exposure and compliance. Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil nedoit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe b est conforme la norme nmb - 003 du canada. LE PRSENT APPAREIL EST CONFORME Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir. les informations correspon-

dantes.

- 07 -

- 08 -

- 10 -

- 11 -

- 12 -

Label Location FCC ID: 2ATIH-EPM1PRO LABEL AND LOCATION

(Size: L1.0cm x 0.5cm) _____________________________________________________________________________________________________

Aukey Technology Co., Ltd Agent Authorization Company: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Product Name: Earphone Trade Mark: AUKEY Model Number(s): EP-M1 Pro FCC ID: 2ATIH-EPM1PRO We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-04-15 Signature:

Name:

Jiaguang Zhou Title:

Manager Company: Aukey Technology Co., Ltd

Aukey Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-04-15 Subject; Request for Confidentiality FCC ID: 2ATIH-EPM1PRO To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name / Title: Jiaguang Zhou / Manager Company: Aukey Technology Co., Ltd Address: Room 102, Building P09, South China City Electronic trading center, Longgang District, Shenzhen, Guangdong ,P.R.China Phone: 0755-33620645 Fax: 0755-33620645 E-Mail: zhoujiaguang@aukeys.com