FCC ID: 2ATIH-EPM1S Earphone

Model: EP-M1S User Manual True Wireless Earbuds Aukey Technology Co., Ltd. www.aukey.com | support@aukey.com Building P09, South China City Electronics Trading Center, Longgang District, Shenzhen, Guangdong, 518111, China FCC ID: 2ATIH-EPM1S Contents English Espaol 01~10 11~20 21~30 31~40 80g 85*65mm Battery Life Battery Type Operating Range Weight Charging Case 7h Li-polymer (2 x 40mAh) 10m 8g (pair) Charging Input Charging Time Battery Type Number of Earbuds Recharges:

Weight DC 5V 2.5 hours Li-polymer (500mAh) 3 32g Getting Started Charging Fully charge the charging case before the rst use. To charge, connect the case to a USB charger or charging port with the included USB-A to C cable to charge the charging case. When the LED charging indicator on the outside of the case changes from ashing blue to solid blue, the case is fully charged. Charging may take 2.5 hours, then case can oer fully charge to the earbuds 3 times. The earbuds should be stored in the case when not in use. Note 1: Remove the protective le from the earbuds when using for the rst time. 2: Using an adapter with an output voltage higher than 5V may not charge the battery or damage the device. Turning On / O Turn On Turn O Open the lid of the charging case and take both earbuds out, the earbuds will automatically power on. To manually power on, tap and hold the touch-sen-

sitive panels for 3 seconds until the LED indicator ashes blue and the voice guidance says "power on". Return both earbuds to the charging case and close the lid, the earbuds will automatically power o. To manually power o, tap and hold the touch-sen-

sitive panel for 10 seconds until the LED indicator ashes red and the voice guidance says "power o". When the earbuds are not worn for about 5 minuts after being removed from the charging case, the earbuds turns o automatically. Pairing Starting with the earbuds in the case:

1. Open the lid of charging case and take both earbuds out, they will automatically turn on, indicators on both earbuds will ash red and blue alternately, and then enter pairing mode, the slave earbud indicator will be o. 2. 3. Turn on the pairing function via BT on the device you want to pair with the earbuds From the list of available devices, nd and select AUKEY Move Mini S. After the connection is successful, the master earbud indicator will be o Regular Use After Pairing Once the earbuds are successfully paired with your device, they can be switched on and o as follows:

Open the lid of the charging case and take both earbuds out, then both earbuds will turn on and connect with each other automatically To turn o, put the earbuds back in the charging case and close the lid, They will begin charging Using the Left / Right Earbud Starting with the earbuds in the case:

1. 2. 3. Take the left/right earbud out Turn on the pairing function on the device you want to pair with the earbud From the list of available devices, nd and select AUKEY Move Mini S Note When you turn on the earbuds, they will be automatically reconnected to the previous-paired device or enter pairing mode if no paired device is found Either left or right earbud can be used individually once connected to your device when you keep the other one inside the charging case The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will lose connection with your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. Or the earbuds will be switched o automatically after 5 minutes Reset the earbuds 1. 2. Cancel the Bluetooth pairing of the phone or computer and the Earbuds. Quickly tab the touch keys on the left and right earbuds for 5 times, and this will clear the pairing records on the device. Put them back into the charging case to charge, then take out the earbuds for re-pairing and connecting. If the reset is unsuccessful, repeat the above steps. 3. 4.

- 03 -

- 04 -

- 05 -

- 06 -

Controls & LED Indicators Streaming Audio Once paired, you can wirelessly stream audio on your device via earbuds. Music will automatically get paused when you receive an incoming phone call and will be resumed once the call ends. Play or pause music Tap the touch-sensitive panel once on either earbud Skip to previous track Double tap the touch-sensitive panel on the left earbud Skip to next track Double tap the touch-sensitive panel on the right earbud Taking Calls Answer a call Reject an incoming call or End a call Activate Siri or other voice assistants Tap the touch-sensitive panel once on either earbud Long-press the touch-sensitive panel on either earbud for 2 seconds Triple-tap the touch-sensitive panel on either earbud

- 07 -

LED Indicator ( for earbuds) Flashing blue O (after charging) Flashing red LED Indicator (for case) Status Earbuds charging Charging case fully charged Battery low Blue ashing 4 times, then o 75%-100% battery remaining Blue ashing 3 times, then o 50%-75% battery remaining Blue ashing 2 times, then o 25%-50% battery remaining Red ashing 4 times, then o 0%-25% battery remaining FAQ The earbuds are on, but not connecting to my device For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual. smartphones require you to set up the earbuds as an audio output device before the audio can be transmitted. If youre using a music player or other device, please make sure it supports the A2DP prole. The sound isnt very clear or the caller cant hear my voice clearly Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range-related issues. Whats the wireless range of the earbuds?

The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device. The earbuds wont turn on Try cleaning the charging the charging pins and then charging the earbuds for a while. If the earbuds still wont power on, please contact our support team at the email address given in Warranty & Customer Support. Product Care & Use Keep away from liquids and extreme heat Dont use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss Regular cleaning is recommended to prevent issues with charging. Warranty & Customer Support For questions, support, or warranty claims, please contact your seller directly. Ive connected the earbuds with my smartphone but cant hear any sound Double-check the volume level on your smartphone and the earbuds. Some I put the earbuds back in the charging case, but the earbuds are still connected The charging case is probably out of power. Try charging it.

- 08 -

- 09 -

- 10 -

Specications Earbuds Model Technology Bluetooth Version Driver (Each channel) Sensitivity Frequency Range Impedance Microphone type Charging time LED Battery Level Indicator USB-C Charging Port EP-M1S HFP, HSP, A2DP, AVRCP, SBC, AAC 5.2 1 x 10mm speaker driver 105dB3dB@1KHz 20Hz-20KHz 3215%

MEMS (microphone chip) 1.5h

- 02 -

Thank you for purchasing the AUKEY EP-M1S True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number. Package Contents True Wireless Earbuds Charging Case Silicone eartips (S / M / L, M come attached to the earbuds) USB-A to C Cable User Manual Product Diagram LED Status Indicator Touch-Sensitive Panel Microphone

- 01 -

Eartip Charging Pins This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.

- 11 -

Aukey Technology Co., Ltd Agent Authorization Company: Aukey Technology Co., Ltd Address: Room 102,Building P09,South China City Electronic trading center, Longgang District, Shenzhen, China Product Name: Earphone Trade Mark: AUKEY Model Number(s): AUKEY FCC ID: 2ATIH-EPM1S We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-08-04 Name:

Jiaguang Zhou Title:

Manager Company: Aukey Technology Co., Ltd

Aukey Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-08-04 Subject; Request for Confidentiality FCC ID: 2ATIH-EPM1S To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name / Title: Jiaguang Zhou / manager Company: Aukey Technology Co., Ltd Address: Room 102,Building P09,South China City Electronic trading center, Longgang District, Shenzhen, China Phone: 0755-33620645 Fax: 0755-33620645 E-Mail: zhoujiaguang@aukeys.com