Original instructions AIR SERIES Part B:
Conformity and frequencies
(434 and 915MHz) INDEX 1 2 Conformity ............................................................................................................. 2 1.1 Conformity of frequency band 433.050-434.790MHz ........................................ 2 1.2 Conformity of frequency band 915-928MHz ..................................................... 2 Frequencies ........................................................................................................... 3 2.1 Frequency band 433.050-434.790MHz ............................................................ 3 2.2 Frequency band 915-928MHz .......................................................................... 4 LIAIRI10-02 AUTEC 2 1 Conformity Conformity Conformity of frequency band 433.050-434.790MHz 1.1 Each AIR series' radio remote control working in the frequency band 433.050-434.790MHz complies with the (R&TTE) Directive 1999/5/EC and its essential requirements. Each radio remote control is also in conformity with the harmonised standards provided in the EC Declaration of Conformity. You can find the EC Declaration of Conformity on the website www.autecsafety.com, in the product page of the relevant transmitting unit. Conformity of frequency band 915-928MHz 1.2 Each AIR series' radio remote control working in the frequency band 915-928MHz complies with the essential requirements of the following regulations:
- FCC (Federal Communication Commission) Part 15
- IC (Industry Canada) RSS-102 Unit FCC ID IC Number A8 transmitting unit OQA-A08LA0AM 9061A-A08LA0AM Receiving unit G ACRS13-G Receiving unit G DCRS13 Receiving unit L ACRS13-L Receiving unit M ACRM15 OQA-RGAGA00M 9061A-RGAGA00M a b c OQA-RGEBA00M 9061A-RGEBA00M a b c OQA-RLBHA00M 9061A-RLBHA00M a b c OQA-RMCEA00M 9061A-RMCEA00M a b c a. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. b. Antenna type Autec stylus /4 Antenna gain Antenna impedance
<0dBi 50 Ohm c. Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the guarantee. LIAIRI10-02 AUTEC - Air series Frequencies 3 Federal Communications Commission (FCC) 1.2.1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada (IC) 1.2.2 This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Frequencies 2 AIR series radio remote controls can work at two different frequency bands: 433.050-
434.790MHz or 915.000-928.000MHz. The radio remote controls' working frequency is defined by market-specific laws and standards. In order for the system machine+radio remote control to be compliant and therefore to be used, it shall comply with such laws and standards: if it does not, the system may be impounded by competent bodies. Autec cannot be held responsible if the radio remote control is set with forbidden frequencies. They automatically search for a free working frequency. 2.1 Frequency band 433.050-434.790MHz Frequencies 2.1.1 The radio link between the units of Autec AIR series radio remote controls is built at one of the frequencies permitted by the European standards in force when the system is put on the market. Frequencies used in the band 433.050-434.790MHz ..................................................... 64 RF power ................................................................................................................ <1mW Channel spacing ...................................................................................................... 25kHz Market 2.1.2 Air series' radio remote controls working in the frequency band 433.050-434.790 MHz can be used within the EU (European Union), the EFTA (European Free Trade Association) and in Singapore. AUTEC - Air series LIAIRI10-02 4 Frequencies 2.2 Frequency band 915-928MHz Frequencies 2.2.1 The radio link between the units of Autec AIR series radio remote controls is built at one of the frequencies permitted by the US and Canadian standards in force when the system is put on the market. Frequencies used in the band 915-928MHz ................................................................ 256 RF power ........................................................................ meets FCC and IC requirements Channel spacing ...................................................................................................... 50kHz Market 2.2.2 Air series' radio remote controls working in the frequency band 915-928MHz can be used in the US and Canadian markets. LIAIRI10-02 AUTEC - Air series