all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 1.30 MiB | May 10 2015 | |||
1 |
|
User Manual 2 | Users Manual | 379.30 KiB | May 10 2015 | |||
1 |
|
User Manual 3 | Users Manual | 1.31 MiB | May 10 2015 | |||
1 |
|
User Manual 4 | Users Manual | 377.60 KiB | May 10 2015 | |||
1 |
|
User Manual 5 | Users Manual | 1.70 MiB | May 10 2015 | |||
1 |
|
User Manual 6 | Users Manual | 1.73 MiB | May 10 2015 | |||
1 | Cover Letter(s) | May 10 2015 | ||||||
1 | Cover Letter(s) | May 10 2015 | ||||||
1 | External Photos | May 10 2015 | ||||||
1 | Internal Photos | May 10 2015 | ||||||
1 | Cover Letter(s) | May 10 2015 | ||||||
1 | ID Label/Location Info | May 10 2015 | ||||||
1 | Test Report | May 10 2015 | ||||||
1 | Test Setup Photos | May 10 2015 |
1 | User Manual 1 | Users Manual | 1.30 MiB | May 10 2015 |
Original instructions Air series User manual Description, warnings and instructions LIAIRE02-02 Warnings and caption for the documentation attached to the radio remote control The attached documentation is an integral part of the radio remote control and it aims at providing the instructions needed for using and maintaining the system, paying particular attention to the safety functions. Always remember that:
- photos and drawings are useful examples that help understand the instructions and warnings of each radio remote control configuration
- if necessary, contact Autec if any of the instructions and/or warnings are not clear. No part of the documentation may be reproduced, in any form or by any means, without written permission of Autec (including recording and photocopying). If documentation is lost or damaged, ask Autec for a copy. Please specify the serial number of the related radio remote control. The documentation must be kept for the whole life of the radio remote control: after reading it, keep it on hand for future reference. All installation, usage and maintenance operations must be carried out by qualified technicians who are suitably trained with respect to the relevant norms and laws. Information contained in the radio remote control documentation adds to and completes the information provided by the manufacturer of the remote controlled machine and/or by those who install the radio remote control on the machine. Therefore, this documentation must be read and understood in all its parts by the user and by:
- the radio remote control owner and/or installer
- the person responsible for and in charge of maintenance and/or safety in the workplace where the radio remote control is used. As for instructions and warnings regarding the machine where the radio remote control is installed, follow the instructions given in the machine's manual. LIAIRE02-02 AUTEC Three symbols are employed throughout documentation, which are used to highlight specific safety-related issues. They are classified according to the hazardous situation that may arise and on the possible consequences:
Symbol If the highlighted instructions are not respected ... .. a dangerous situation will occur highly probable. probable. probable. ..consequences for people may be critical (death or physical damage). critical (death or physical damage). ..consequences for property may be critical. critical. moderate (non-severe physical damage). moderate. This symbol is also used, and it identifies texts to be read carefully. LIAIRE02-02 AUTEC AIr SerIeS Part A: Description, warnings and instructions InDex 1 2 radio remote control description ........................................................................ 6 1.1 How the radio remote control works ................................................................. 6 1.2 Technical Data ................................................................................................. 6 1.3 Applications ..................................................................................................... 6 1.4 Radio link ......................................................................................................... 7 1.5 Classification of commands ............................................................................. 7 1.6 Safety function: stop protection ........................................................................ 7 1.7 Protection against unintended movements from the rest position ..................... 8 1.8 Identifying the radio remote control .................................................................. 8 risk assessment ................................................................................................... 9 2.1 Risk assessment for radio remote controlled machines .................................... 9 2.2 Staff training .................................................................................................. 10 2.3 Working conditions ........................................................................................ 10 3 Warnings for installation .................................................................................... 11 3.1 General .......................................................................................................... 11 3.2 Mounting and fastening the receiving unit in the best position ........................ 11 3.3 Positioning the antenna ................................................................................. 12 3.4 Wiring ............................................................................................................ 12 3.5 At end of installation ...................................................................................... 15 3.6 Testing ........................................................................................................... 15 4 Warnings for use ................................................................................................. 16 4.1 Before starting to work ................................................................................... 16 4.2 During normal operation ................................................................................ 17 4.3 After using the radio remote control ............................................................... 17 radio remote control life cycle .......................................................................... 18 5.1 Transportation and storage ............................................................................ 18 5.2 Installation ..................................................................................................... 18 5.3 Use ................................................................................................................ 19 5.4 Radio remote control maintenance ................................................................. 19 5.5 Machine maintenance .................................................................................... 24 5.6 Disposal ......................................................................................................... 24 Troubleshooting .................................................................................................. 25 6.1 Radio remote controls with Data Feedback function ....................................... 25 6.2 Radio remote controls with wire control .......................................................... 25 6.3 Solutions in case of malfunction ..................................................................... 25 6 5 LIAIRE02-02 AUTEC 6 1 radio remote control description Radio remote control description 1.1 How the radio remote control works Industrial radio remote controls are used to control machines from a distance, without physical connection between the user and the machine (i.e. wires or connecting cables). They consist of a portable transmitting unit, from which the user remotely controls the machine, and a receiving unit installed on board the machine itself. Technical Data 1.2 Command response time (typical) ........................................................................... 140ms Working range (typical) ..................................................................... 75-100m (240-330ft) Stop time (typical) ................................................................................................... 100ms Max. stop time ............................................................................................................. 0.5s Performance Level of the "stop protection" in compliance with ISO 13849-1 .............. PL d 1.3 Applications AIR series' radio remote controls can be installed on hoisting and material handling machines
(i.e. overhead cranes). AIr series radio remote controls cannot be installed:
- on machines working in zones with risk of explosion
- on machines for people lifting and transportation (the machine's manufacturer may authorize installation and use of a radio remote control on such applications under their own responsibility, if the risk assessment they carried out gave positive results)
- on machines that may generate dangerous situations if they stop due
- on machines for which a risk assessment is not possible or gave negative to the loss of radio link results Autec cannot be held responsible if the radio remote control is installed on forbidden applications. LIAIRE02-02 AUTEC - Air series Radio remote control description 7 1.4 radio link The transmitting unit constantly communicates with the receiving unit through a radio link. This is an essential requirement to ensure safety for the radio remote controlled machine. The two units use messages coded through an address that is unique (produced by Autec only once) and univocal (specific for each radio remote control). Each unit can only decode messages coming from the unit with the same address. This prevents messages from other radio equipment from activating any "machine+radio remote control" system function. 1.5 Classification of commands Commands sent by the transmitting unit are classified according to their type. 1.5.1 Type of command: analogue or digital Commands sent by the transmitting unit can either be analogue or digital. Analogue commands generate proportional outputs as a function of the position of the corresponding actuator. Digital commands switch the status of their corresponding output, according to the position of the related actuator. This status can either be on or off. 1.5.2 name of commands All commands sent by the transmitting unit are identified by abbreviations, which are written in the technical data sheet to highlight the match between commands sent and machine functions. Safety function: stop protection 1.6 The stop function brings the machine to a safe state every time it is necessary to stop it due to a potentially hazardous situation. Depending on the situation, this function can either be deliberately activated by the operator through the STOP pushbutton, or it is automatically activated when the radio link is incorrect or interrupted (the receiving unit autonomously stops the radio remote control). The stop function by means of radio remote control is available only if the radio remote control is started up (see "Starting up the radio remote control" in the "Part C" of the manual). In any other condition the transmitting unit is not able to bring the machine in a safe state. never leave the transmitting unit unguarded in order to avoid uncertainty about the availability or unavailability of the stop function. The life time of the stop function is 20 years. In any case, the radio remote control must be replaced within this period. AUTEC - Air series LIAIRE02-02 8 Radio remote control description Protection against unintended movements from the rest position 1.7 This function protects the system machine+radio remote control from unintended movements, namely machine movements not activated intentionally by the user, but resulting from possible electrical and mechanical failure of the radio remote control. Such function checks the neutral (rest) position of the actuators that control the machine's movements. Each time one of those actuators is operated, the transmitting unit sends both the movement command and the SAFETY command. Identifying the radio remote control 1.8 As required by standard IEC 60204-32, each radio remote control is uniquely identified through a serial number (SERIAL N. or S/N). The serial number is provided in the identification plate on each radio remote control unit. This is the only reference to be used both for maintenance operations and for declarations to competent bodies. Plates on the units must not be:
- removed from their position (removal will invalidate the guarantee)
- altered or damaged (contact Autec for replacement) LIAIRE02-02 AUTEC - Air series Risk assessment 9 risk assessment 2 When using and installing an industrial radio remote control it is therefore always necessary to evaluate if the machine can be radio remote controlled. In fact, as required by standards ISO 12100 and ISO 14121, all machines must undergo risk assessment and related analysis. The radio remote control can only be installed and used if this assessment gives positive results. The machine manufacturer and/or the person who decides upon radio remote control installation and use is responsible for this risk assessment. Autec cannot be held responsible if this assessment has not been carried out correctly or is incomplete. If required by the risk assessment, implement protection measures to prevent, reduce and report potential hazardous situations. 2.1 risk assessment for radio remote controlled machines When carrying out risk assessment for the machine or for the system where the radio remote control is installed, the following must be considered:
- some machines cannot be radio remote controlled: check for forbidden applications (see
- the radio link between the two units may be interrupted due to persistent disturbance
- all warnings related to installation, use and maintenance provided by Autec must be paragraph 1.3) or interference. taken into account 2.1.1 Aspects related to radio link Whenever the radio link is interrupted (i.e. stop, low battery, automatic switch off, receiving unit not powered):
- all outputs of the receiving unit are disabled
- it is not possible to enable or disable the machine commands through the transmitting unit until the radio remote control is started up again. AUTEC - Air series LIAIRE02-02 10 Risk assessment 2.1.2 Delay in command response time Due to the characteristics of radio propagation (i.e.: eM interference, out-
of-working-range condition), a delay up to the "Maximum stop time" may occasionally occur from the moment a command in the transmitting unit is released to the moment its corresponding output in the receiving unit is deactivated. Those who decide upon the installation of the radio remote control must make sure that this delay never leads to a dangerous situation in the specific uses. 2.1.3 Protection from unintended activation The transmitting unit housing is manufactured so that it protects the actuators from unintentional activation, while meeting at the same time the operating needs, the comfort requirements and law limits. Assessment shall be made to establish possible additional protection measures for the actuators (i.e. commands requiring two-hand operation, dead-man function) if particular environments, equipment and working modes could cause accidental bumps to the actuators. 2.1.4 Command activation and loss of command Please consider that it is possible to unintentionally activate a command and/or involuntarily lose the selection of a command. Such anomalous events may be caused by electro-mechanical or mechanical damages in the "machine+radio remote control" system. Carefully evaluate the possible consequences of such malfunction. If required by the risk assessment, implement protection measures to prevent, reduce and report potential hazardous situations. Staff training 2.2 All installation, usage and maintenance operations must be carried out by qualified technicians who are suitably trained with respect to:
- warnings resulting from risk assessment
- regulations and reference laws
- instructions and warnings provided in the documents related to the industrial radio remote control and to the radio remote controlled machine
- instructions provided by those who install the radio remote control on the machine and by the person in charge for safety in the workplace where the system "machine+radio remote control" is used 2.3 Working conditions To guarantee correct radio remote control operation, all current regulations regarding safety at work and accident prevention should be respected. Furthermore, always respect all national regulations regarding the use of both the machine and the radio remote control valid in the country where the "machine+radio remote control" system is used. Autec cannot be held responsible if the radio remote control is used in unlawful working conditions. LIAIRE02-02 AUTEC - Air series Warnings for installation 11 Warnings for installation 3 Besides instructions established by the machine's manufacturers, installers must always observe the following warnings. 3.1 General respect and enforce the provisions of all reference standards relevant in the concerned application field (i.e. IEC 60204-32 for hoisting machines.) Always follow the instructions provided in the technical data sheet and respect values given in the technical data to carry out correct installation. The electrical connection of the receiving unit must meet the requirements set by clause 9.1 of standard IeC 60204-1 and/or standard IeC 60204-32. 3.2 Mounting and fastening the receiving unit in the best position Place the receiving unit so that it can be easily reached in case of need. Place the receiving unit vertically, with the cable gland or plug facing down. Fix the receiving unit in four points, using the specific holes in the housing. Do not perforate the receiving unit in any case. When installing on machines that vibrate, it is recommended to fix the receiving unit to the machine with the appropriate vibration dampers. AUTEC - Air series LIAIRE02-02 12 Warnings for installation 3.3 Positioning the antenna The antenna is inside the receiving unit. Hence, install the receiving unit towards the working area, so that shields, structures or materials do not obstruct the radio link. In particular, the receiving unit must be placed at least 50 cm far from metal objects in its surroundings and never inside closed metal containers. WArnInG: If the receiving unit is shielded by metal structures or is installed inside metal cabinets, use the appropriate extension kit for the antenna. In this case, install the antenna in a vertical position, and if possible towards the working area. If this warning is disregarded, the radio remote control working range may be reduced. 3.4 Wiring The power supply of the receiving unit must be connected using an omnipolar switch with a switch-contact gap of at least 3 mm, that allows power supply disconnection during installation, wiring and/or maintenance operations. The receiving unit's power supply must be protected against short circuit by means of an external device (e.g. fuse, thermal magnetic circuit breaker). Such device must be able to interrupt the maximum fault current (including the short circuit current) allowed in the circuit. receiving units powered with AC and exposed to transient overvoltages exceeding those of overvoltage category II, require additional protections that must be provided outside of the receiving units themselves. If the receiving unit is powered with direct current, the power supply must come:
- from a power supply unit with a safety isolating transformer, or
- from a 12/24V battery. LIAIRE02-02 AUTEC - Air series Warnings for installation 13 relay outputs of receiving unit's commands are dimensioned so as to control power loads. Contacts of those outputs are protected by means of over-voltage suppressors (varistors), to ensure the maximum lifetime of relays in most applications. Suppressors connected in parallel with contacts of commands' relays may be incompatible with the connection to a high-impedance load (e.g. some PLCs); please contact Autec to perform correct installation. Loads connected to the relay outputs must ensure the minimum power, voltage and current value that the contacts can switch with good reliability
(300mW, 5V, 5mA). Connect an additional load to the outputs if necessary. If a receiving unit's output (be it a solid state output or the contact of a relay) controls a DC inductive load (i.e. solenoid valves, relays), it is advisable to connect a recovery diode in anti-parallel with the driven load, to reduce the effects of demagnetizing currents. Pay special attention to currents and voltages flowing in the SAFETY and STOP outputs: they shall not exceed the maximum permitted values (see technical data of the receiving unit). To obtain the protection from unintended movements from the rest position, connect the contact of the SAFETY relay in series with the movement commands. The STOP circuit in the receiving unit has two contacts connected in series through a wire jumper (manufacturer's standard wiring). If the machine needs a STOP circuit with two separate contacts (four wires), this bridge can be removed. In this case, the installer is responsible for wiring in a way that assures the required safety level. AUTEC - Air series LIAIRE02-02 14 Warnings for installation Group the wiring away from the electronic module, in order to avoid interferences and hazards related to electrical safety. evaluate the radio remote control's wiring and remember that if the output dedicated to the machine's horn, siren or blinker is used for another command due to application's and/or functional reasons, some procedures in the Configuration Menu may result unavailable later on. To wire the terminals corresponding to the commands' outputs, to the STOP outputs and to the SAFETY outputs, it is recommended to use a slot screwdriver with a tip size of 3.5x0.4mm. LIAIRE02-02 AUTEC - Air series Warnings for installation 3.5 At end of installation 15 Make sure that during installation the protection measures on the radio remote control and/or in the machine have not been made ineffective by possible procedures carried out. Look up in the technical data sheet and check that the frequency band set in the radio remote control is permitted in the country of use. Correctly close the receiving unit so that the protection degree from dust and water is not jeopardised: check that the gasket is intact, correctly put the housing parts one over the other so that they overlap, and tighten the screws. Testing 3.6 The installer must check and complete the technical data sheet in all its parts, adding the date the system has been put into service, his stamp and signature. After installing and wiring the receiving unit, test the system machine+radio remote control, and check that the operations carried out correspond exactly to the commands sent (in particular check the STOP command). In case of malfunction, disable the system machine+radio remote control until the problem has been completely solved. AUTEC - Air series LIAIRE02-02 16 Warnings for use Warnings for use 4 In addition to all instructions provided by the machine manufacturer, by the installer of the radio remote control and by the person responsible for the safety of the work area, users shall always respect the following warnings. 4.1 Before starting to work Stand in a position that allows the direct supervision of the remote controlled machine and its load, and stay in a place ensuring the user's safety conditions in respect of other operations and/or activities and/or processes that are carried out in the working environment. Always check that the mechanical operation of the STOP pushbutton is correct. If it is impossible or difficult to press this pushbutton, do not use the radio remote control. never start up or use the transmitting unit if the working conditions present the risk of losing balance or tripping. Only start up the transmitting unit when starting work: improper use may cause hazardous situations. never start up or use the transmitting unit in closed spaces, with the machine not in sight, or outside the radio remote control working range: in such cases it is in fact still possible to build a radio link, thus causing the risk that unwanted commands be carried out by the machine. Get familiar with the correspondence between the actuators and the machine's movements (this is indicated in the attached technical data sheet) and learn symbols on the transmitting unit's panel (symbols used are defined by the machine manufacturer and/or installer depending on the machine's operation and functions). LIAIRE02-02 AUTEC - Air series Warnings for use 4.2 During normal operation 17 Pay attention to the entire work area. Immediately press the STOP pushbutton when a hazardous situation occurs. Visually and directly follow all movements of the machine and its load and remain inside the radio remote control working range. Pay particular attention to warnings and visual and acoustic signals, and take all measurements and steps to avoid that movements of the remote controlled machine may lead to hazardous situations for people and/or property. In case of malfunction, disable the system machine+radio remote control until the problem has been completely solved. Pay attention to low battery signals: all dangerous operations (e.g. hanging load) must be concluded before it is completely flat.. Use the transmitting unit in a simple and comfortable way, avoiding accidental falls. The pouch, the waist belt and the shoulder harness provided with the radio remote control are used for that purpose. 4.3 After using the radio remote control Switch off the transmitting unit when work is stopped or temporarily interrupted. Do not leave the load hanging (even when charging the unit or changing the battery). never leave the transmitting unit unguarded in order to prevent unauthorised use. If an "Key ID 0-1" is in the transmitting unit, always store it in a safe place each time it is removed. If this key is lost, the radio remote control cannot work, since the transmitting unit needs the address stored in the key to work with its receiving unit. AUTEC - Air series LIAIRE02-02 18 Radio remote control life cycle radio remote control life cycle 5 To ensure safe and long-lasting operation of industrial radio remote controls, carefully follow the instructions provided for each stage of the product life cycle. 5.1 Transportation and storage Radio remote controls must always be transported and stored inside their packing until they are installed on the machine. Environmental transportation and storage conditions are given in the following table. Temperature relative Humidity Air Pressure Transportation Storage Class 2K4
-40C to +70C
(-40F to +158F) Class 1K5
-40C to +70C
(-40F to +158F) Class 2K4 95%
Class 1K3 5% to 95%
Class 2K4 70kPa to 106kPa Class 1K5 70kPa to 106kPa 5.2 Installation The radio remote control can only be installed and tested by competent staff that masters the technical knowledge required to carry out these procedures and is qualified according to the regulation of the country where the radio remote control is mounted. Only if the radio remote control is installed correctly can it be used safely. Always follow the instructions provided in the technical data sheet to carry out correct installation. Please contact the machine manufacturer or the person who decided upon the installation of the radio remote control for instructions and warnings regarding the installation. LIAIRE02-02 AUTEC - Air series Radio remote control life cycle 19 All warnings for correct installation are given in chapter 3. All instructions for correct installation are given in "Part D" of the manual (related to the receiving unit). 5.3 Use The use of industrial radio remote controls is strictly limited to skilled and properly trained personnel. All warnings for correct use are given in chapter 4. All instructions for correct use are given in "Part C" of the manual (related to the transmitting unit). Environmental working conditions are given in the following table. Temperature relative Humidity Air Pressure transmitting Use of the unit Use unit of the receiving Class 4K4H
-20C to +55C
(-4F to +130F) Class 4K4H
-20C to +70C
(-4F to +158F) Class 4K4H 4% to 100%
Class 4K4H 70kPa to 106kPa 5.4 radio remote control maintenance The following instructions provide information to safely carry out routine and special maintenance operations for the radio remote control. They shall be completed by:
- instructions provided by the machine manufacturer
- directions provided by the installer of the radio remote control on the machine
- regulations regarding safety at work and accident prevention in force in the country where the radio remote control is used. All fine-tuning, checking and maintenance actions carried out on the radio remote control shall be verified and recorded by the person in charge of carrying out maintenance on the machine. Before any maintenance operation, disconnect power supply from the receiving unit. After each maintenance operation, always make sure that all commands sent by the transmitting unit only activate the corresponding expected operations. AUTEC - Air series LIAIRE02-02 20 Radio remote control life cycle In case of malfunction or damaged parts, disable the system machine+radio remote control until the problem has been completely solved. After each maintenance operation, if a unit has been opened, close it correctly, in order not to endanger its protection degree from dust and water: check that the gasket is intact, correctly overlay the two parts of the housing and tighten the screws. 5.4.1 routine maintenance Routine maintenance consists of operations needed to preserve the radio remote control normal usage conditions, thus implementing fine-tuning, checks, planned replacement actions that necessarily arise from the normal use of the product. All given instructions must be followed correctly at each commissioning, that is:
- whenever the radio remote control and/or the machine is installed or assembled
- whenever the machine location/position changes
- after special maintenance. Routine maintenance carried out as described in this manual is fundamental for using the radio remote control safely. Special applications may need more specific routine maintenance actions to be carried out at different periods (i.e. if the working environment is particularly dirty, in case of heavy applications or if the system is used very frequently, some maintenance actions may be required more frequently, depending on the decision of the person in charge for safety in the work site). 5.4.2 Daily routine maintenance Before starting to work:
- make sure that the transmitting unit panel symbols can be easily recognised and replace the panel if necessary
- check that the three plates on the transmitting unit are readable and intact
- make sure that the mechanical operation of the STOP pushbutton is correct
- check structural integrity of the transmitting unit. During normal operation:
- avoid causing structural damage to the transmitting unit
- make sure that materials that could endanger the transmitting unit usage and safety (such as concrete, sand, lime, dust) do not deposit on it. After using the radio remote control:
- clean the transmitting unit: never use solvents or flammable/corrosive materials and do not use high-pressure water cleaners or steam cleaners
- store the transmitting unit in clean and dry areas. LIAIRE02-02 AUTEC - Air series Radio remote control life cycle 21 5.4.3 Three-month routine maintenance Every three months:
- remove dust or deposit of material from the receiving unit: never use solvents or flammable/
corrosive materials to clean it, and do not use high-pressure water cleaners or steam cleaners
- check structural integrity of the receiving unit
- make sure that the wiring of the receiving unit is intact and connected
- make sure that the receiving unit panel symbols can be easily recognised and replace the panel if necessary
- check that the plates on the receiving unit are readable and intact. 5.4.4 Six-month routine maintenance Every six months:
- check the correct correspondence between the commands that are sent and the manoeuvres that are carried out by the machine
- check that the contact of the SAFETY relay is open when no movement command has been sent. This is safety critical maintenance: it is necessary to keep a record (date, signature, comments) showing that this check has been regularly carried out. Keep the record together with other installation documents.
- make sure that all the relay contacts of the receiving unit operate correctly, and check that the contact closes when the corresponding manoeuvre is enabled and opens when the manoeuvre is disabled.
- start up the radio remote control and check in the receiving unit that the STOP relay contacts close. Then, press the STOP pushbutton and check in the receiving unit that the STOP relay contacts open. Before testing the STOP relays, make sure that no dangerous situations may arise due to the closing of the STOP relay contacts of the receiving unit. AUTEC - Air series LIAIRE02-02 22 Radio remote control life cycle 5.4.5 Special maintenance Special maintenance consists of repairs needed due to radio remote control failure, damage or malfunction, carried out with the aim of restoring the original usage and working conditions. Prior to contacting the support service technicians:
- read and understand all documents related to the radio remote control, and make sure that all the instructions they contain have been accomplished correctly
- follow the instructions to detect possible malfunctions and their origins. Any fault should be repaired by authorised personnel only (contact the support service of the machine's manufacturer), using original Autec spare parts only. The following radio remote control data must be reported in order to make interventions faster and more reliable:
- radio remote control serial number
- purchase date (given on the certificate of guarantee)
- description of the problem found
- address and telephone number of the place where the device is being used (with the name of the person to contact)
- local supplier. LIAIRE02-02 AUTEC - Air series Radio remote control life cycle 23 5.4.6 Preventive replacement of actuators (joysticks, pushbuttons and selectors) Each actuator on the transmitting units can be used for a maximum number of operations. replace joysticks, pushbuttons and selectors on the transmitting unit before they reach the maximum number of operations, even though they are still working. replacement prevents possible failures that may lead to loss of safety. Actuator Max. operations Actuator Max. operations 5x106 5x106 3x106 25x104 105 106 5x106 106 6x106 5x104 106 AUTEC - Air series LIAIRE02-02 24 Radio remote control life cycle 5.5 Machine maintenance Follow instructions provided by the machine manufacturer and by the installer of the radio remote control, in order to carry out machine maintenance. When carrying out maintenance on the machine, always disconnect power supply from the receiving unit. In the event of necessary maintenance on the machine (i.e. soldering), disconnect all the electrical connections of the receiving unit. 5.6 Disposal When disposing of a radio remote control, give it to the waste separate collecting services in the user's country. LIAIRE02-02 AUTEC - Air series Troubleshooting 25 Troubleshooting 6 When the radio remote control does not work:
- bring the transmitting unit close to the receiving unit to avoid radio interference and disturbances
- establish whether the problem lies with the radio remote control or with the machine. Therefore, before any inspection, try to control the machine from a control unit different from the radio remote control, if present. If the problem persists, it lies with the machine. If not, the problem may lie with the radio remote control. In such case, please refer to paragraph 6.3. 6.1 radio remote controls with Data Feedback function It is still possible that the transmitting unit sends commands to control the machine even if the Data Feedback function does not work properly, or if there is no information and/or signals coming from it. To check that the radio remote control works properly, please refer to paragraph 6.3. When the display or the LeD array does not work, please contact the support service of the machine manufacturer, even if no one of the problems indicated in paragraph 6.3 has been detected. 6.2 radio remote controls with wire control Please refer to paragraph 6.3 to check that the radio remote control works properly. Possibly use the wire control to check if radio interference occurs. On the contrary, if you want to check that the wire control works properly:
- connect the cable to the transmitting unit and to the machine
- check that the manoeuvres carried out by the machine correspond to the commands sent by the transmitting unit. Solutions in case of malfunction 6.3 Look up in Part C and/or in Part D of the manual to identify the radio remote control malfunction signalled by light signals on the units. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. AUTEC - Air series LIAIRE02-02 AUTEC SRL via pomaroli 65 Caldogno (VI) Italy - phone: +39 0444 901000 - mail: info@autecsafety.com - www.autecsafety.com
1 | User Manual 2 | Users Manual | 379.30 KiB | May 10 2015 |
Original instructions Air series Part B:
Conformity and frequencies
(434 and 915MHz) index 1 2 Conformity ............................................................................................................. 2 1.1 Conformity of frequency band 433.050-434.790MHz ........................................ 2 1.2 Conformity of frequency band 915-928MHz: FCC and IC ................................. 2 Frequencies ........................................................................................................... 3 2.1 Frequency band 433.050-434.790MHz ............................................................ 4 2.2 Frequency band 915-928MHz .......................................................................... 4 LIAIRE12-01 AUTEC 2 1 Conformity Conformity 1.1 Conformity of frequency band 433.050-434.790MHz Each AIR series' radio remote control working in the frequency band 433.050-434.790MHz complies with the (R&TTE) Directive 1999/5/EC and its essential requirements. Each radio remote control is also in conformity with the harmonised standards provided in the EC Declaration of Conformity. You can find the EC Declaration of Conformity on the website www.autecsafety.com, in the product page of the relevant transmitting unit. 1.2 Conformity of frequency band 915-928MHz: FCC and iC An AIR series' radio remote control working in the frequency band 915-928MHz complies with the essential requirements of the following regulations:
- FCC (Federal Communication Commission) Part 15
- IC (Industry Canada) RSS-102 Unit A8 transmitting unit AJM transmitting unit AJr transmitting unit AJs transmitting unit FCC id OQA-A08LA0AM OQA-AJMDA0BM OQA-AJRDA0BM OQA-AJSDA0BM iC number 9061A-A08LA0AM 9061A-AJMDA0BM 9061A-AJRDA0BM 9061A-AJSDA0BM Transmitting unit LK6/LK8 Transmitting unit LK6 dF receiving unit G ACrs13-G receiving unit G dCrs13 receiving unit L ACrs13-L receiving unit M ACrM15 receiving unit HACrP8 receiving unit MVrCAn receiving unit MVrL9e OQA-LKNLA1CM 9061A-LKNLA1CM OQA-LKNDA1DM 9061A-LKNDA1DM OQA-RGAGA00M d 9061A-RGAGA00M a b c OQA-RGEBA00M d 9061A-RGEBA00M a b c OQA-RLBHA00M d 9061A-RLBCA00M a b c OQA-RMCEA00M d 9061A-RMCEA00M a b c OQA-RPDFA00M d 9061A-RPDFA00M a b c OQA-RNFLA00M d 9061A-RNFLA00M a b c OQA-RRLPA00M d 9061A-RRLPA00M a b c LIAIRE12-01 AUTEC - Air series Frequencies 3 receiving unit dCrM24 receiving unit ACrM5e OQA-RMGMA00M d 9061A-RMGMA00M a b c OQA-RMHN00M d 9061A-RMHNA00M a b c a. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. b. Antenna type Autec stylus /4 Antenna gain Antenna impedance
<0dBi 50 Ohm c. Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the guarantee. d. Place the antenna of the receiving unit in a position that ensures a minimum separation distance of 20cm with all the people that can be in the working area. 1.2.1 Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. industry Canada (iC) 1.2.2 This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Frequencies 2 AIR series radio remote controls can work at two different frequency bands: 433.050-
434.790MHz or 915.000-928.000MHz. AUTEC - Air series LIAIRE12-01 4 Frequencies The radio remote controls' working frequency is defined by market-specific laws and standards. in order for the system machine+radio remote control to be compliant and therefore to be used, it shall comply with such laws and standards: if it does not, the system may be impounded by competent bodies. Autec cannot be held responsible if the radio remote control is set with forbidden frequencies. They automatically search for a free working frequency. 2.1 Frequency band 433.050-434.790MHz 2.1.1 Frequencies The radio link between the units of Autec AIR series radio remote controls is established at one of the frequencies permitted by the European standards in force when the system is put on the market. Frequencies used in the band 433.050-434.790MHz ..................................................... 64 RF power ................................................................................................................ <1mW Channel spacing ...................................................................................................... 25kHz 2.1.2 Market Air series' radio remote controls working in the frequency band 433.050-434.790 MHz can be used within the EU (European Union), the EFTA (European Free Trade Association), in Australia and in Singapore. 2.2 Frequency band 915-928MHz 2.2.1 Frequencies The radio link between the units of Autec Air series radio remote controls is established at one of the frequencies permitted by the US, Canadian and Australian standards in force when the system is put on the market. Frequencies used in the band 915-928MHz ................................................................ 255 RF power (FCC and IC) ................................................... meets FCC and IC requirements Channel spacing ...................................................................................................... 50kHz 2.2.2 Market Air series' radio remote controls working in the frequency band 915-928MHz can be used in the US, Canadian and Australian markets. Check on the technical data plate of the units in which markets the radio remote control can be used. LIAIRE12-01 AUTEC - Air series
1 | User Manual 3 | Users Manual | 1.31 MiB | May 10 2015 |
Traduction de la notice d'origine Srie Air Manuel de l'utilisateur Description, avertissements et instructions LIAIRF02-02 Avertissements et lgende de la documentation jointe la radiocommande Toute la documentation jointe fait partie intgrante de la radiocommande et a pour objectif de fournir les indications ncessaires l'utilisation et l'entretien, avec une attention particulire porte sur les fonctions de scurit. Il est rappel que :
- les photos et les plans sont fournis titre indicatif afin de mieux comprendre les instructions et les avertissements de chaque configuration de la radiocommande,
- contacter Autec en cas de doute sur les instructions et/ou les consignes. Aucune partie de la documentation ne peut, sous aucun prtexte, tre reproduite quel que soit le format ou le moyen, sans autorisation crite d'Autec (y compris l'enregistrement et la photocopie). En cas de dtrioration ou de perte de la documentation, en demander une copie Autec en spcifiant le numro de srie de la radiocommande correspondante. Il est rappel que toute la documentation doit tre conserve sur toute la dure de vie de la radiocommande : aprs l'avoir lue, la tenir disposition pour toute consultation. Toutes les oprations d'installation, d'utilisation et d'entretien doivent obligatoirement tre excutes par un personnel qualifi et form aux rglementations et aux lois de rfrence. Les informations reportes dans la documentation de la radiocommande sont complmentaires celles fournies par le constructeur de la machine quipe de la radiocommande et/ou par l'installateur de la radiocommande sur la machine. Ainsi, faut-il que la prsente documentation ait t lue et comprise entirement non seulement par l'oprateur mais galement par :
- le propritaire et/ou linstallateur de la radiocommande,
- le responsable et l'oprateur charg de l'entretien et/ou de la scurit sur le lieu de travail o la radiocommande est utilise. Pour les instructions et les avertissements relatifs la machine quipe d'une radiocommande, suivre les indications du constructeur reportes dans le manuel d'instructions de la machine. LIAIRF02-02 AUTEC La documentation utilise trois symboles mettant en vidence des indications particulires relatives la scurit en fonction de la situation risque gnre, ainsi que les consquences :
Symbole L'inobservation des indications mises en vidence... .. porte une situation de danger certaine. probable. probable. .. peut porter atteinte aux personnes graves (mort ou dommages physiques). graves (mort ou dommages physiques). .. peut dtriorer les biens graves. graves. modres (dommages physiques lgers). modres. Par ailleurs, ce symbole met en vidence les textes lire avec une attention particulire. LIAIRF02-02 AUTEC Srie Air Partie A : Description, avertissements et instructions SommAire 1 2 3 4 5 6 Description de la radiocommande ....................................................................... 6 1.1 Fonctionnement de la radiocommande ............................................................ 6 1.2 Donnes techniques ........................................................................................ 6 1.3 Applications ..................................................................................................... 6 1.4 Liaison radiolectrique ..................................................................................... 7 1.5 Classification des commandes ......................................................................... 7 1.6 Fonction de scurit : protection de l'arrt ....................................................... 7 1.7 Protection contre les mouvements involontaires partir de la position de repos 8 1.8 Identification de la radiocommande .................................................................. 8 valuation des risques ......................................................................................... 9 2.1 valuation des risques pour les machines radiocommandes .......................... 9 2.2 Formation du personnel ................................................................................. 10 2.3 Conditions de travail ...................................................................................... 10 Consignes dinstallation ..................................................................................... 11 3.1 Gnrales ...................................................................................................... 11 3.2 Positionnement et fixation de l'unit de rception ........................................... 11 3.3 Positionnement de l'antenne .......................................................................... 12 3.4 Cblage ......................................................................................................... 12 3.5 Au terme de linstallation ................................................................................ 15 3.6 Rception ...................................................................................................... 15 Consignes d'utilisation ....................................................................................... 16 4.1 Avant de commencer travailler .................................................................... 16 4.2 Lors du fonctionnement courant ..................................................................... 17 4.3 Aprs avoir utilis la radiocommande ............................................................. 17 Cycle de vie de la radiocommande .................................................................... 18 5.1 Transport et stockage .................................................................................... 18 5.2 Installation ..................................................................................................... 18 5.3 Utilisation ....................................................................................................... 19 5.4 Entretien de la radiocommande ..................................................................... 19 5.5 Entretien de la machine ................................................................................. 24 5.6 Mise la casse .............................................................................................. 24 Guide la rsolution des dysfonctionnements ................................................ 25 6.1 Radiocommandes fonction Data Feedback ................................................. 25 6.2 Radiocommandes cble .............................................................................. 25 6.3 Actions correctives en cas de dysfonctionnements ........................................ 25 LIAIRF02-02 AUTEC 6 1 Description de la radiocommande Description de la radiocommande Fonctionnement de la radiocommande 1.1 Une radiocommande industrielle sert commander des machines distance sans connexion physique (par exemple, les fils ou les cbles de raccordement) entre l'oprateur et la machine. Elle est compose d'une unit de transmission portable partir de laquelle l'oprateur commande la machine et d'une unit de rception bord de la machine. 1.2 Donnes techniques Temps de rponse des commandes (typique) ......................................................... 140ms Rayon daction (typique) .................................................................... 75-100m (240-330ft) Temps d'arrt (typique) ........................................................................................... 100ms Temps d'arrt maximal ................................................................................................ 0.5s Niveau de performance (Performance Level) de la protection de l'arrt selon l'ISO 13849-1 .............................................................................................................. PLd 1.3 Applications Une radiocommande de la srie AIR peut tre installe sur des machines de levage et de manutention de matriel en gnral (par exemple, un pont roulant). Une radiocommande de la srie Air ne doit pas tre installe :
- sur des machines installes dans un environnement exigeant des appareils aux caractristiques antidflagrantes,
- sur les machines de manutention, de levage et de transport des personnes
(le constructeur de la machine peut autoriser l'installation et l'utilisation de la radiocommande sur ces applications sous sa responsabilit ds lors que l'valuation des risques qu'il aura men a donn un rsultat positif)
- sur des machines qui pourraient provoquer des situations risques en cas d'arrt d la perte de la liaison radiolectrique,
- sur les machines o l'valuation des risques s'avre impossible ou bien a donn un rsultat ngatif, Autec n'assumera aucune responsabilit si la radiocommande est installe sur des applications non autorises. LIAIRF02-02 AUTEC - Srie Air Description de la radiocommande 7 Liaison radiolectrique 1.4 Lunit de transmission communique avec l'unit de rception en mode continu travers une liaison radiolectrique. C'est une condition ncessaire pour garantir la scurit de la machine radiocommande. Les deux units codifient les messages travers une adresse unique (produite par Autec une seule fois) et univoque (spcifique chaque radiocommande). Une unit ne peut dcoder que les messages provenant de l'unit prsentant la mme adresse. Il est donc exclu qu'un message provenant d'un autre appareil radio active une quelconque fonction du systme machine + radiocommande . 1.5 Classification des commandes Les commandes envoyes par lunit de transmission sont classifies selon leur type. 1.5.1 Type de commande : analogique ou digital Les commandes envoyes par lunit de transmission peuvent tre analogiques ou digitales. Une commande analogique gnre une sortie proportionnelle en fonction de la position de l'actionneur correspondant. Une commande digitale commute l'tat de la sortie correspondante selon la position de l'actionneur associ. Cet tat peut tre allum ou teint. 1.5.2 Nom des commandes Toutes les commandes envoyes par lunit de transmission sont identifies par des sigles reports sur la fiche technique afin de faciliter la correspondance entre les commandes envoyes et les fonctions de la machine. Fonction de scurit : protection de l'arrt 1.6 La fonction d'arrt porte la machine dans un tat scuris chaque fois qu'il s'avre ncessaire de l'arrter cause d'une situation potentiellement dangereuse. Selon les cas, cette fonction est active volontairement par l'oprateur l'aide du bouton-poussoir de STOP ou bien intervient automatiquement lorsque la liaison radiolectrique s'avre errone ou interrompue
(lunit de rception dcide elle-mme d'arrter la radiocommande). La fonction d'arrt l'aide de la radiocommande est disponible uniquement si cette dernire est dmarre (voir Dmarrage de la radiocommande dans la Partie C du manuel). Dans toute autre condition l'unit de transmission n'est pas capable de porter la machine dans un tat sr. Ne jamais laisser l'unit de transmission sans surveillance de faon viter l'incertitude sur la disponibilit ou non de la fonction d'arrt. Le cycle de vie de la fonction d'arrt est de 20 ans. Dans tous les cas, la radiocommande doit tre remplace dans ce dlai. AUTEC - Srie Air LIAIRF02-02 8 1.7 Protection contre les mouvements involontaires partir de la position de repos Description de la radiocommande Cette fonction protge le systme machine + radiocommande des mouvements involontaires, c'est--dire des mouvements de la machine non pas activs par l'oprateur de manire volontaire, mais causs par des pannes lectriques ou mcaniques de la radiocommande. Cette protection contrle la position neutre (de repos) des actionneurs commandant les mouvements de la machine. chaque intervention de ces actionneurs, lunit de transmission envoie la commande de mouvement et la commande SAFETY. Identification de la radiocommande 1.8 Conformment la norme CEI 60204-32, chaque radiocommande est identifie de manire univoque par un numro de srie (SERIAL N. ou S/N). Le numro de srie se trouve sur la plaque d'identification de la radiocommande appose sur chaque unit. C'est l'unique rfrence utilise aussi bien en cas d'intervention d'entretien que de dclarations aux services comptentes. Les plaques prsentes sur l'unit ne doivent pas tre :
- retires (leur dpose fait immdiatement tomber la garantie),
- altres ou dtriores (contacter Autec pour leur remplacement) LIAIRF02-02 AUTEC - Srie Air valuation des risques 9 valuation des risques 2 En cas d'utilisation et d'installation d'une radiocommande industrielle, toujours valuer si la machine peut tre radiocommande ou pas. En effet, comme requis par les normes ISO 12100 et ISO 14121, il faudra raliser, pour chaque machine, une valuation des risques et l'analyse correspondante. Seul un rsultat positif de cette valuation permettra l'installation et l'utilisation de la radiocommande. La responsabilit de cette valuation des risques revient au constructeur de la machine et/ou au dcideur de l'installation et de l'utilisation de la radiocommande. Autec ne pourra assumer aucune responsabilit si cette valuation n'aura pas t correctement effectue ou bien effectue partiellement. Si l'valuation des risques le requiert, il faudra prvoir des mesures de protection permettant de prvenir, de rduire et de signaler les situations risque potentiel. valuation des risques pour les machines radiocommandes 2.1 Dans l'valuation des risques de la machine ou du systme sur lequel est installe la radiocommande, on devra tenir compte des considrations suivantes :
- certaines machines ne peuvent pas tre radiocommandes : vrifier les applications non
- cause de perturbations ou d'interfrences persistantes, la liaison radiolectrique entre
- tous les avertissements relatifs l'installation, l'utilisation et l'entretien, fournis par autorises (voir le paragraphe 1.3) les deux units peut tre interrompue, Autec, doivent tre pris en compte. 2.1.1 Aspects lis la liaison radiolectrique prendre en compte Dans tous les cas o la liaison radiolectrique est interrompue (par exemple arrt, batterie dcharge, coupure automatique, coupure de l'alimentation sur l'unit de rception) :
- toutes les sorties de l'unit de rception sont dsactives
- il s'avre alors impossible d'activer ou de dsactiver les commandes de la machine l'aide de l'unit de transmission jusqu'au redmarrage successif de la radiocommande. AUTEC - Srie Air LIAIRF02-02 10 valuation des risques 2.1.2 retard du temps de rponse des commandes Pour les caractristiques du moyen radio (par exemple, prsence d'interfrences, rayon d'action atteint), le retard entre le relchement d'une commande sur l'unit de transmission et la dsactivation de la sortie correspondante sur l'unit de rception peut se prolonger jusqu'au Temps d'arrt maximal . Le dcideur de l'installation de la radiocommande doit s'assurer que ce retard ne gnre jamais une situation risque dans l'application spcifique. 2.1.3 Protection contre les activations involontaires Lenveloppe de lunit de transmission est ralise de manire protger les actionneurs de toute activation involontaire, tout en satisfaisant les exigences de travail, les demandes d'ergonomie et les contraintes normatives. On devra valuer et ventuellement adopter des mesures de protection supplmentaires pour les actionneurs (par exemple, commandes autorisation deux mains, fonction homme mort ) si l'environnement, l'quipement et le mode de travail peuvent entraner des chocs accidentels. 2.1.4 Activation et perte des commandes On devra prendre en compte le fait que l'on peut activer involontairement une commande et/ou perdre involontairement la slection d'une commande. Ces vnements anormaux peuvent tre causs par des pannes lectromcaniques ou mcaniques du systme machine + radiocommande . valuer attentivement les consquences d'un tel dysfonctionnement. Si l'valuation des risques le requiert, il faudra prvoir des mesures de protection permettant de prvenir, de rduire et de signaler les situations risque potentiel. Formation du personnel 2.2 Toutes les oprations d'installation, d'utilisation et d'entretien doivent obligatoirement tre ralises par un personnel qualifi et spcialement form :
- aux avertissements drivant de l'valuation des risques,
- aux rglementations et aux lois de rfrence,
- aux avertissements et aux instructions de la documentation de la radiocommande industrielle et de la machine quipe de la radiocommande,
- aux indications de l'installateur de la radiocommande sur la machine et du responsable de la scurit sur le lieu de travail o le systme machine + radiocommande est utilis. 2.3 Conditions de travail Pour garantir le bon fonctionnement de la radiocommande, toutes les prescriptions de scurit et de prvention des accidents sur le lieu de travail doivent tre respectes. Par ailleurs, toutes les lois nationales, en vigueur dans chaque tat, relatives l'emploi de la radiocommande et de la machine, doivent tre observes lorsque que le systme "machine+radiocommande"
est utilis. Autec ne pourra assumer aucune responsabilit si la radiocommande est utilise dans des conditions de travail hors normes. LIAIRF02-02 AUTEC - Srie Air Consignes dinstallation 11 Consignes dinstallation 3 Outre les indications imposes par le constructeur de la machine, l'installateur devra toujours respecter les consignes suivantes. 3.1 Gnrales respecter et appliquer entirement les normes de rfrence du secteur d'application (par exemple ieC 60204-32 pour les machines de levage). Pour excuter une installation correcte, toujours respecter les indications fournies sur la fiche technique et les valeurs indiques dans les donnes techniques. Le raccordement lectrique de l'unit de rception doit satisfaire les conditions requises par l'article 9.1 des normes Cei 60204-1 et/ou Cei 60204-32. 3.2 Positionnement et fixation de l'unit de rception Placer l'unit de rception de manire ce qu'elle soit facilement accessible en cas de besoin. Placer l'unit de rception verticalement, avec le serre-cble ou la fiche vers le bas. Fixer lunit de rception en quatre points l'aide des trous prdisposs sur le botier. Ne perforer, en aucun cas, lunit de rception. en cas d'installation sur des machines mettant des vibrations, il est conseill de fixer l'unit de rception la machine en interposant des lments antivibratoires. AUTEC - Srie Air LIAIRF02-02 12 Consignes dinstallation 3.3 Positionnement de l'antenne L'antenne se trouve l'intrieur de l'unit de rception. Aussi, faudra-t-
il installer l'unit de rception en vue de la zone de travail de manire ce que les crans, les structures ou le matriel ne gnent pas la liaison radiolectrique. en particulier, l'unit de rception doit tre positionne 50 cm au moins de tout objet mtallique et jamais l'intrieur de botiers mtalliques ferms. ATTeNTioN : Si l'unit de rception est couverte par des structures mtalliques ou bien installe l'intrieur de tableaux mtalliques, utiliser le kit de rallonge de l'antenne. Dans ce cas, installer l'antenne la verticale et, si possible, en vue de la zone de travail. L'inobservation de cette consigne peut limiter le rayon d'action de la radiocommande. 3.4 Cblage Lalimentation de l'unit de rception doit obligatoirement passer par un interrupteur unipolaire prsentant une distance entre contacts d'au moins 3 mm et permettant de couper l'alimentation lors des oprations d'installation, de cblage et/ou d'entretien. Lalimentation de l'unit de rception doit tre protge contre les courts-
circuits l'aide d'un organe de scurit externe (par exemple un fusible, un disjoncteur magntothermique).Cet organe devra possder les capacits de coupure suffisantes afin de pouvoir interrompre le courant maximal en cas de dfaut ( y compris le courant de court-circuit). Les units de rception alimentes en courant alternatif et exposes surtensions transitoires qui dpassent la catgorie de surtension ii, ont besoin de protections supplmentaires qui doivent tre prvues l'extrieur des units de rception. Si l'unit de rception est alimente en courant continu, l'alimentation doit obligatoirement tre fournie:
- par un alimentateur prsentant un transformateur de scurit ou
- par une batterie 12/24V. LIAIRF02-02 AUTEC - Srie Air Consignes dinstallation 13 Les sorties relais de lunit de rception sont dimensionnes pour piloter les charges de puissance. Les contacts de ces sorties sont protgs par des suppresseurs de surtension (varistors) afin de garantir la longvit maximale des relais sur la majeure partie des applications. Les suppresseurs monts en parallle aux contacts des relais, peuvent s'avrer incompatibles avec le raccordement une charge haute impdance
(par exemple, certains contrleurs logiques). Contacter Autec pour effectuer une bonne installation. Les charges relies aux sorties relais doivent garantir un minimum de puissance, tension et courant pour que les contacts puissent commuter de faon fiable (300mW, 5V, 5mA). Relier une charge supplmentaire sur les sorties en cas de besoin. Si une sortie de l'unit de rception (pouvant tre elle-mme l'tat solide ou le contact d'un relais) pilote une charge inductive en courant continu
(par exemple une lectrovanne, un relais), il faudra appliquer une diode rcupration monte directement en antiparallle sur la charge pilote, afin de rduire les effets des courants de dmagntisation. Prter une attention particulire aux intensits et aux tensions prsentes sur les sorties SAFeTY et SToP : elles ne devront pas dpasser les valeurs maximales autorises (voir les donnes techniques de l'unit de rception). Le contact du relais SAFeTY doit tre raccord en srie au commun des commandes de mouvement lorsque la protection contre les mouvements involontaires partir de la position de repos s'avre ncessaire. Sur lunit de rception, le circuit de SToP est ralis par deux contacts raccords en srie par un cavalier (cblage standard du constructeur). Si la machine exige un circuit de STOP deux contacts (quatre fils) spars, on pourra retirer ce cavalier. Dans ce cas, il est de la responsabilit de l'installateur de raliser un cblage garantissant le niveau de scurit requis. AUTEC - Srie Air LIAIRF02-02 14 Consignes dinstallation Regrouper les fils de cblage loin du module lectronique afin d'viter toute interfrence et tout danger relatif la scurit lectrique. valuer le cblage de la radiocommande en tenant compte du fait que si, pour des raisons d'application et/ou de fonctionnalit, la sortie ddie au klaxon, la sirne ou au clignotant de la machine est utilise pour une autre commande, alors les procdures du Menu de configuration ne seront pas toutes disponibles par la suite. Pour cbler les bornes relatives aux sorties des commandes, aux sorties du STOP et aux sorties du SAFETY, il est conseill d'employer un tournevis tte plate de 3.5 x 0.4 mm. LIAIRF02-02 AUTEC - Srie Air Consignes dinstallation 3.5 Au terme de linstallation 15 Durant l'installation, vrifier qu'aucune opration pouvant annuler les mesures de protection prvues sur la radiocommande et/ou prsents l'intrieur de la machine, n'ait t effectue. Vrifier, sur la fiche technique, que la bande de frquence autorise dans le pays d'utilisation de la radiocommande a bien t impose. Bien refermer l'unit de rception pour ne pas compromettre l'indice de protection la poussire et l'eau : vrifier l'tat du joint, superposer correctement les parties de l'enveloppe et visser les vis. 3.6 rception Linstallateur doit vrifier et compiler entirement la fiche technique, en y apposant la date de mise en service de l'installation, son cachet et sa signature. Aprs l'installation et le cblage de l'unit de rception, rceptionner le systme machine + radiocommande en vrifiant la parfaite correspondance entre les commandes envoyes et les manuvres excutes (en particulier, la commande de SToP). en cas de dysfonctionnement, il faudra placer le systme machine +
radiocommande hors service jusqu' l'limination complte du problme. AUTEC - Srie Air LIAIRF02-02 16 Consignes d'utilisation Consignes d'utilisation 4 Outre les indications imposes par le constructeur de la machine, par l'installateur de la radiocommande et par le responsable de la scurit de la zone de travail, l'oprateur devra toujours respecter les consignes suivantes. 4.1 Avant de commencer travailler Se placer dans une position permettant le contrle direct de la machine radiocommande et des mouvements de la charge, et garantissant ses propres conditions de scurit par rapport aux autres oprations et/ou activits et/ou travaux excuts sur le lieu de travail. Toujours vrifier le bon fonctionnement mcanique du bouton-poussoir de STOP. S'il s'avrait impossible ou difficile d'actionner ce bouton-poussoir, ne pas utiliser la radiocommande. Ne jamais dmarrer ou utiliser lunit de transmission dans les situations o l'on pourrait perdre l'quilibre ou trbucher. Ne jamais dmarrer lunit de transmission si ce n'est pour entamer les activits : un usage impropre pourrait provoquer des situations dangereuses. Ne jamais lancer ou actionner lunit de transmission dans des locaux ferms, hors de la visibilit ou hors du rayon d'action de la radiocommande
: mme dans ces cas, il peut, en effet, se crer une liaison radiolectrique avec le risque de faire excuter des commandes non voulues la machine radiocommande. Apprendre la correspondance entre les actionneurs et les manuvres de la machine, reporte sur la fiche technique jointe, et la symbologie prsente sur le panneau de l'unit de transmission (les symboles utiliss ont t dcids par le constructeur de la machine et/ou l'installateur en fonction de l'oprativit des fonctionnalits). LIAIRF02-02 AUTEC - Srie Air Consignes d'utilisation 17 4.2 Lors du fonctionnement courant Prter une attention particulire l'ensemble de la zone de travail et intervenir immdiatement en enfonant le bouton-poussoir de SToP si une situation dangereuse se vrifiait. Suivre, travers un contrle visuel direct, tous les mouvements de la machine et de la charge, en restant l'intrieur du rayon d'action de la radiocommande. Prter une attention particulire aux avertissements et aux signalisations visuelles et acoustiques et adopter toutes les mesures et les prcautions ncessaires afin d'viter que le mouvement de la machine radiocommande ne puisse crer des situations risque pour les biens et/ou les personnes. en cas de dysfonctionnement, placer le systme machine + radiocommande hors service jusqu' l'limination complte du problme. Prter attention aux signalisations de batterie dcharge : il faudra alors achever les oprations dangereuses (par exemple, charge suspendue) avant qu'elle ne se dcharge compltement. Utiliser lunit de transmission commodment et facilement en vitant qu'elle ne tombe accidentellement. Le fourreau, la sangle ventrale et la sangle en bandoulire fournis avec la radiocommande sont prvus cet effet. 4.3 Aprs avoir utilis la radiocommande teindre l'unit de transmission lorsque l'on suspend ou que l'on interrompt momentanment les activits, en vitant de laisser la charge suspendue
(mme lors de la charge de l'unit ou du remplacement de la batterie dcharge). Ne jamais laisser lunit de transmission sans surveillance afin d'empcher son usage non autoris. Si l'unit de transmission comporte une Key iD 0-1 , toujours la ranger dans un endroit sr chaque fois qu'elle est extraite. en cas de perte de cette cl, il s'avre impossible de faire fonctionner la radiocommande car lunit de transmission a besoin, pour travailler avec l'unit de rception correspondante, de l'adresse mmorise sur la cl. AUTEC - Srie Air LIAIRF02-02 18 Cycle de vie de la radiocommande Cycle de vie de la radiocommande 5 Afin de garantir une utilisation scurise et durable d'une radiocommande industrielle, suivre attentivement les indications relatives chaque phase de vie du produit. 5.1 Transport et stockage Une radiocommande doit toujours tre transporte et conserve dans son emballage jusqu' ce qu'elle soit installe sur la machine. Les conditions ambiantes de transport et de stockage son reportes dans le tableau suivant :
Temprature Humidit relative Pression de l'air Transport Stockage Classe 2K4 de -40C +70C
(de -40F +158F) Classe 1K5 de -40C +70C
(de -40F +158F) Classe 2K4 95%
Classe 2K4 de 70kPa 106kPa Classe 1K3 de 5% 95%
Classe 1K5 de 70kPa 106kPa 5.2 installation Linstallation et la rception de la radiocommande doivent exclusivement tre excutes par un personnel qualifi possdant les connaissances techniques ncessaires l'accomplissement de ces oprations et habilit conformment aux dispositions du pays o le montage est ralis. Seule une installation correcte peut garantir une utilisation scurise de la radiocommande. Pour une installation correcte, toujours respecter les indications fournies sur la fiche technique. Pour les instructions et les indications relatives l'installation, s'adresser au constructeur de la machine ou au dcideur de l'installation de la radiocommande. LIAIRF02-02 AUTEC - Srie Air Cycle de vie de la radiocommande 19 Toutes les consignes relatives l'installation sont reportes au chapitre 3. Toutes les instructions pour une bonne installation sont reportes la Partie D du manuel
(relative l'unit de rception). 5.3 Utilisation Une radiocommande industrielle doit obligatoirement tre utilise par un personnel qualifi et form. Toutes les consignes relatives l'utilisation sont reportes au chapitre 4. Toutes les instructions relatives l'utilisation sont reportes la Partie C du manuel
(relative l'unit de transmission). Les conditions ambiantes de fonctionnement sont reportes dans le tableau suivant :
Temprature Humidit relative Pression de l'air Utilisation de l'unit de transmission Utilisation de l'unit de rception Classe 4K4H de -20C +55C
(de -4F +130F) Classe 4K4H de -20C +70C
(de -4F +158F) Classe 4K4H de 4% 100%
Classe 4K4H de 70kPa 106kPa entretien de la radiocommande 5.4 Les instructions qui suivent fournissent les informations permettant d'excuter en toute scurit les oprations d'entretien ordinaire et extraordinaire de la radiocommande. Elles doivent tre compltes :
- par les instructions fournies par le constructeur de la machine,
- par les indications de l'installateur de la radiocommande sur la machine,
- par les dispositions lgales en matire de scurit sur le lieu de travail et de prvention des accidents en vigueur dans le pays d'utilisation de la radiocommande. Toutes les interventions de mise au point, de contrle et d'entretien de la radiocommande sont vrifies et enregistres par le Responsable de l'entretien de la machine. Avant toute intervention d'entretien, couper l'alimentation de l'unit de rception. Aprs toute intervention dentretien, toujours vrifier que toutes les commandes envoyes par l'unit de transmission activent exclusivement les manuvres prvues. AUTEC - Srie Air LIAIRF02-02 20 Cycle de vie de la radiocommande en cas de dysfonctionnement ou de dtrioration, il faudra placer le systme machine + radiocommande hors service jusqu' l'limination complte du problme. Aprs toute intervention d'entretien o l'unit a t ouverte, la refermer correctement afin de ne pas compromettre l'indice de protection contre la poussire et l'eau : vrifier l'tat du joint, superposer correctement les parties de l'enveloppe et visser les vis. 5.4.1 entretien ordinaire L'entretien ordinaire est l'opration ou l'ensemble des oprations ncessaires au maintien des conditions courantes d'utilisation de la radiocommande travers des interventions de mise au point, de vrification, de remplacement programm des pices, ncessaires une utilisation courante du produit. Toutes les instructions reportes doivent tre excutes chaque mise en service, c'est--dire :
- chaque installation ou montage de la radiocommande et/ou de la machine,
- chaque modification de l'emplacement ou du positionnement de la machine,
- aprs un entretien extraordinaire. Un entretien ordinaire conforme aux instructions de ce manuel est indispensable au fonctionnement scuris de la radiocommande. Des applications particulires pourraient exiger des interventions d'entretien ordinaire plus spcifiques et avec des temps diffrents (par exemple, en cas d'ambiances de travail particulirement sales, d'applications pnibles ou trs frquentes, il pourrait s'avrer ncessaire d'effectuer certaines interventions avec une frquence suprieure sur dcision du responsable de la scurit du chantier). 5.4.2 entretien ordinaire quotidien Avant de commencer travailler :
- vrifier que les symboles du panneau de l'unit de transmission sont bien visibles et, au besoin, remplacer le panneau,
- contrler la lisibilit et l'tat des trois plaques de lunit de transmission,
- vrifier le bon fonctionnement mcanique du bouton-poussoir de STOP
- vrifier si la structure de lunit de transmission est en bon tat. Lors du fonctionnement courant :
- faire attention ne pas compromettre la structure l'unit de transmission
- prter attention ce qu'aucune matire ne se dpose sur l'unit de transmission (comme le ciment, le sable, la chaux, la poussire), qui pourrait en compromettre le fonctionnement et la scurit. Aprs avoir utilis la radiocommande :
- nettoyer lunit de transmission : ne jamais employer de solvants ou de produits inflammables ou corrosifs et ne pas employer de nettoyeurs eau sous pression ou des appareils vapeur,
- ranger l'unit de transmission dans un endroit sec et propre. LIAIRF02-02 AUTEC - Srie Air Cycle de vie de la radiocommande 21 5.4.3 entretien ordinaire trimestriel Tous les trois mois :
- retirer la poussire et toute accumulation de matire de l'unit de rception : ne jamais utiliser de solvants ou des produits inflammables ou corrosifs, ni de nettoyeurs haute pression ou des appareils vapeur,
- contrler que la structure de lunit de rception est en bon tat,
- vrifier l'tat et la connexion du cblage de l'unit de rception,
- vrifier que les symboles du panneau de l'unit de rception sont bien visibles et, au besoin, remplacer le panneau,
- contrler la lisibilit et l'tat des plaques de lunit de rception. 5.4.4 entretien ordinaire semestriel Tous les six mois :
- vrifier la correspondance entre les commandes envoyes et les manuvres excutes par la machine,
- vrifier que le contact du relais SAFETY est ouvert lorsqu'aucune commande de mouvement n'est envoye. Cet entretien s'avre extrmement important pour la scurit
: il est ncessaire d'enregistrer cette intervention (date, signature, commentaires) afin de s'assurer que la vrification a t effectue. Conserver l'enregistrement avec les autres documents concernant l'installation.
- vrifier le bon fonctionnement des contacts de tous les relais de l'unit de rception en contrlant la fermeture du contact lors de l'activation de la manuvre correspondante et l'ouverture du contact lors de la dsactivation de la manuvre.
- dmarrer la radiocommande et contrler dans l'unit de rception que les contacts des relais de STOP se ferment. Puis, appuyez sur le bouton de STOP et contrler dans l'unit de rception que les contacts des relais de STOP s'ouvrent. Avant de contrler le fonctionnement des relais de SToP, s'assurer qu'aucune situation dangereuse ne peut se manifester cause de la fermeture des contacts des relais de SToP de l'unit de rception. AUTEC - Srie Air LIAIRF02-02 22 Cycle de vie de la radiocommande 5.4.5 entretien extraordinaire L'entretien extraordinaire est l'opration ou l'ensemble des oprations de rparation rendues ncessaires cause de pannes, de ruptures ou de dysfonctionnements de la radiocommande, ayant pour objet de restaurer les conditions d'utilisation et de fonctionnement d'origine. Avant de faire intervenir les techniciens du service d'assistance, il faudra :
- avoir lu et compris tous les documents relatifs la radiocommande et vrifier l'excution correcte de toutes les instructions reportes,
- avoir excut les instructions de la recherche des dysfonctionnements et de leurs causes. Les dfauts ventuels ne peuvent tre rpars que par un personnel agr
(s'adresser au service d'assistance du constructeur de la machine), en employant exclusivement des pices de rechange d'origine Autec. Pour que l'intervention soit plus rapide et efficace, il faudra communiquer toutes les donnes d'identification de la radiocommande :
- le numro de srie de la radiocommande
- la date d'achat (indique sur le certificat de garantie),
- le dfaut constat,
- l'adresse et le n de tlphone du lieu d'utilisation (et le nom du responsable contacter),
- le fournisseur. LIAIRF02-02 AUTEC - Srie Air Cycle de vie de la radiocommande 23 5.4.6 remplacement prventif des actionneurs (manipulateurs, boutons-poussoirs et slecteurs) Tout actionneur des units de transmission ne peut tre utilis que pour un nombre maximal de manuvres. remplacer les manipulateurs, les boutons-poussoirs et les slecteurs de lunit de transmission avant qu'ils n'aient atteint le nombre maximal de manuvres, mme s'ils sont encore en tat de marche. Ce remplacement permet de prvenir tout dfaut qui pourrait galement mener une baisse du niveau de scurit. Actionneur Nombre maximal de manuvres Actionneur Nombre maximal de manuvres 5x106 5x106 3x106 25x104 105 106 5x106 106 6x106 5x104 106 AUTEC - Srie Air LIAIRF02-02 24 Cycle de vie de la radiocommande entretien de la machine 5.5 L'entretien de la machine doit tre excut conformment aux instructions fournies par le constructeur de la machine et par l'installateur de la radiocommande sur la machine. Avant toute intervention d'entretien sur la machine, toujours couper lalimentation de lunit de rception. Si une intervention d'entretien de la machine s'avre ncessaire (par exemple, une soudure), dbrancher galement toutes les connexions lectriques de l'unit de rception. 5.6 mise la casse Pour la mise la casse, confier la radiocommande au service de collecte diffrencie le plus proche. LIAIRF02-02 AUTEC - Srie Air Guide la rsolution des dysfonctionnements 25 Guide la rsolution des dysfonctionnements 6 Si la radiocommande ne marche pas, il faut :
- rapprocher lunit de transmission de lunit de rception afin d'viter toute perturbation et toute interfrence radio,
- tablir que le problme concerne la radiocommande ou bien la machine. cet effet, avant toute vrification, essayer de commander la machine sur un poste de commande diffrent de celui de la radiocommande, si prsent. Si le problme persiste, c'est qu'il concerne la machine. Dans le cas contraire, il concerne la radiocommande. Dans ce cas, consulter le paragraphe 6.3. 6.1 radiocommandes fonction Data Feedback Lenvoi des commandes de contrle de la machine de la part de lunit de transmission peut galement tre possible en cas de dysfonctionnement de la fonction Data Feedback ou d'absence de ses informations et/ou signalisations. Pour vrifier le fonctionnement en tant que radiocommande, consulter le paragraphe 6.3. Lorsque l'afficheur ou les voyants ne fonctionnent pas, contacter le service d'assistance du constructeur de la machine, mme si aucun des problmes indiqus au paragraphe 6.3 ne se vrifie. 6.2 radiocommandes cble Consulter le paragraphe 6.3 afin de vrifier le fonctionnement en tant que radiocommande. Utiliser ventuellement le fonctionnement par commande cble afin de vrifier la prsence d'interfrences radio. Par contre, pour vrifier le fonctionnement en tant que commande cble :
- raccorder le cble lunit de transmission et la machine,
- contrler la correspondance entre les commandes de lunit de transmission et les manuvres de la machine. 6.3 Actions correctives en cas de dysfonctionnements Rechercher, dans la Partie C et/ou dans la Partie D du manuel, le dysfonctionnement de la radiocommande en fonction des signalisations lumineuses des units. Si le problme persiste aprs avoir appliqu l'action corrective indique, contacter le service d'assistance du constructeur de la machine. AUTEC - Srie Air LIAIRF02-02 AUTEC SRL via pomaroli 65 Caldogno (VI) Italy - phone: +39 0444 901000 - mail: info@autecsafety.com - www.autecsafety.com
1 | User Manual 4 | Users Manual | 377.60 KiB | May 10 2015 |
Traduction de la notice d'origine Srie Air Partie B:
Conformit et frquences
(434 et 915MHz) SoMMAire 1 2 Conformit ............................................................................................................. 2 1.1 Conformit de la bande de frquence 433.050-434.790MHz ............................ 2 1.2 Conformit de la bande de frquence 915-928MHz: FCC et IC ........................ 2 Frquences ............................................................................................................ 3 2.1 Bande de frquence 433.050-434.790MHz ...................................................... 4 2.2 Bande de frquence 915-928MHz .................................................................... 4 LIAIRF12-01 AUTEC 2 1 Conformit Conformit 1.1 Conformit de la bande de frquence 433.050-434.790MHz Chaque radiocommande de la srie AIR oprant sur la bande de frquence 433.050-
434.790MHz est conforme la directive 1999/5/CE (R&TTE) et ses exigences ncessaires. Chaque radiocommande est, par ailleurs, conforme aux normes harmonises reportes sur la dclaration de conformit CE. La dclaration de conformit CE se trouve sur le site internet www.autecsafety.com, la page Produit de l'unit de transmission correspondante. 1.2 Conformit de la bande de frquence 915-928MHz: FCC et iC Une radiocommande de la srie AIR oprant sur la bande de frquence 915-928MHz est conforme aux exigences ncessaires :
- FCC (Federal Communication Commission) Part 15
- IC (Industry Canada) RSS-102 Unit Unit de transmission A8 Unit de transmission AJM Unit de transmission AJr Unit de transmission AJS FCC iD OQA-A08LA0AM OQA-AJMDA0BM OQA-AJRDA0BM OQA-AJSDA0BM iC Number 9061A-A08LA0AM 9061A-AJMDA0BM 9061A-AJRDA0BM 9061A-AJSDA0BM Unit de transmission LK6/LK8 Unit de transmission LK6 DF Unit de rception G ACrS13-G Unit de rception G DCrS13 Unit de rception L ACrS13-L Unit de rception M ACrM15 Unit de rception HACrP8 Unit de rception MVrCAN Unit de rception MVrL9e OQA-LKNLA1CM 9061A-LKNLA1CM OQA-LKNDA1DM 9061A-LKNDA1DM OQA-RGAGA00M d 9061A-RGAGA00M a b c OQA-RGEBA00M d 9061A-RGEBA00M a b c OQA-RLBHA00M d 9061A-RLBCA00M a b c OQA-RMCEA00M d 9061A-RMCEA00M a b c OQA-RPDFA00M d 9061A-RPDFA00M a b c OQA-RNFLA00M d 9061A-RNFLA00M a b c OQA-RRLPA00M d 9061A-RRLPA00M a b c LIAIRF12-01 AUTEC - Srie Air Frquences 3 Unit de rception DCrM24 Unit de rception ACrM5e OQA-RMGMA00M d 9061A-RMGMA00M a b c OQA-RMHN00M d 9061A-RMHNA00M a b c a. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada.Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne.Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. b. Type d'antenne Autec stylus /4 Gain d'antenne impdance de l'antenne
<0dBi 50 Ohm c. Autec vous autorise seulement utiliser l'antenne ddie fournie avec la radiocommande ou comme pice de rechange d'origine. L'utilisation de tout autre type d'antenne est interdite et annulerait la garantie. d. Placez l'antenne de l'unit de rception dans une position qui permet de garantir au moins une distance minimale de 20 cm avec toutes les personnes qui peuvent tre dans la zone de travail. 1.2.1 Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. industry Canada (iC) 1.2.2 Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et
(2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Frquences 2 Les radiocommandes de la srie AIR peuvent travailler sur deux bandes de frquences distinctes: 433.050-434.790MHz ou 915.000-928.000MHz. AUTEC - Srie Air LIAIRF12-01 4 Frquences La frquence laquelle une radiocommande peut oprer est impose par les lois et les rglementations en fonction du march d'utilisation. Afin que le systme machine + radiocommande s'avre conforme et puisse ainsi tre utilis, ces lois et ces rglementations doivent tre respectes. Dans le cas contraire, le systme risquerait d'tre mis sous squestre par les organismes comptents. Autec ne pourra assumer aucune responsabilit si la radiocommande est configure avec une frquence non autorise. La recherche d'une frquence libre s'effectue automatiquement. 2.1 Bande de frquence 433.050-434.790MHz 2.1.1 Frquences La liaison radiolectrique entre les units des radiocommandes Autec de la srie AIR s'effectue avec l'une des frquences autorises par les rglementations europennes en vigueur lors de leur introduction sur le march. Frquences utilises sur la bande 433.050-434.790 MHz .............................................. 64 Puissance RF ......................................................................................................... <1 mW Largeur de bande utilise ....................................................................................... 25 kHz 2.1.2 March Les radiocommandes de la srie Air oprant sur la bande de frquence 433.050-434.790MHz peuvent tre utilises l'intrieur de l'UE (Union Europenne), de l'EFTA (European Free Trade Association), en Australie et Singapour. 2.2 Bande de frquence 915-928MHz 2.2.1 Frquences La liaison radiolectrique entre les units des radiocommandes Autec de la srie Air s'effectue l'une des frquences admises par les rglementations US, canadiennes et australiennes en vigueur lors de l'introduction sur le march. Frquences utilises sur la bande 915-928 MHz ......................................................... 255 Puissance RF (FCC et IC) ..................... conformment aux conditions requises FCC et IC Largeur de bande utilise ....................................................................................... 50 kHz 2.2.2 March Les radiocommandes de la srie Air oprant sur la bande de frquence 915-928MHz peuvent tre utilises l'intrieur des marchs US, canadien et australien. Vrifiez sur la plaque des donnes techniques de l'unit dans quel march les radiocommandes peuvent tre utilises. LIAIRF12-01 AUTEC - Srie Air
1 | User Manual 5 | Users Manual | 1.70 MiB | May 10 2015 |
Original instructions Air series Part C: LK6, LK8 and LK6 DF transmitting units inDex 1 2 3 4 5 6 Description ............................................................................................................ 3 1.1 Description of units LK6 and LK8 ..................................................................... 3 1.2 Description of unit LK6 DF ............................................................................... 4 Technical data ....................................................................................................... 5 2.1 Technical data of units LK6 and LK8 ................................................................ 5 2.2 Technical data of unit LK6 DF .......................................................................... 5 Technical data sheet ............................................................................................. 5 Plates ..................................................................................................................... 6 4.1 Plates on units LK6, LK8 and LK6 DF belonging to a radio remote control system ............................................................................................................. 6 4.2 Plates on units LK6, LK8 and LK6 DF belonging to a Take & Release system . 6 4.3 Plates on units LK6, LK8 and LK6 DF belonging to a Multi Units or Multi Receiver system ............................................................................................................. 7 Light signals .......................................................................................................... 8 5.1 Light signals of units LK6 and LK8 ................................................................... 8 5.2 Light signals of unit LK6 DF ........................................................................... 10 General operating instructions .......................................................................... 13 6.1 Starting up the radio remote control ............................................................... 13 6.2 Command activation ...................................................................................... 15 6.3 Data Feedback Function ................................................................................ 15 6.4 Radio link interruption .................................................................................... 16 LILK6E00-02 AUTEC 7 6.5 Transmitting unit automatic switch off ............................................................ 16 6.6 Switching off the transmitting unit ................................................................... 16 Operation ............................................................................................................. 17 7.1 Battery ........................................................................................................... 17 7.2 ID internal tx memory ..................................................................................... 18 7.3 Power keyswitch ............................................................................................ 18 7.4 START pushbutton ........................................................................................ 20 7.5 FUNCTION pushbutton .................................................................................. 20 7.6 STOP pushbutton .......................................................................................... 20 7.7 DISPLAY pushbutton (if the transmitting unit has a display) ........................... 20 8 Malfunction signalled by the transmitting unit ................................................. 21 LILK6E00-02 AUTEC Description 1 Description 1.1 Description of units LK6 and LK8 LK A 3 J H G BM C D E F N LED Actuator (selector, pushbutton) (if present) Battery Power keyswitch (if present) Battery housing Transmitting unit identification plate Radio remote control identification plate A B C D e F G H J K L M n P P Technical data plate START pushbutton FUNCTION pushbutton Command pushbuttons STOP pushbutton DIP switches Connector for "ID internal tx memory"
AUTEC - Air series LILK6E00-02 4 Description 1.2 Description of unit LK6 DF ML A BN C D E F K J H G P Display Actuator (selector, pushbutton) (if present) Battery Power keyswitch (if present) Battery housing Transmitting unit identification plate DISPLAY pushbutton A B C D e F G Q H J K L M n P Q Radio remote control identification plate Technical data plate START pushbutton FUNCTION pushbutton Command pushbuttons STOP pushbutton DIP switches Connector for "ID internal tx memory"
LILK6E00-02 AUTEC - Air series Technical data 2 Technical data 5 Technical data of units LK6 and LK8 2.1 Power supply (battery MHM03) .............................................................................. 3.6V Power supply (battery LPM01) ............................................................................... 3.7V Antenna .................................................................................................................. internal Housing material .......................................................................................... PA 6 (20%fg) Protection degree ....................................................................................... IP65 (NEMA 4) Dimensions .................................................................. 201x85x49mm (7.91x3.35x1.92In) Weight ....................................................................................................... 380g (0.837Lb) Run time at 20C (68F):
- with battery MHM03 .................................................................................................... >8h
- with battery LPM01 ................................................................................................... >16h Technical data of unit LK6 DF 2.2 Power supply (battery LPM01) ............................................................................... 3.7V Antenna .................................................................................................................. internal Housing material .......................................................................................... PA 6 (20%fg) Protection degree ....................................................................................... IP65 (NEMA 4) Dimensions .................................................................. 201x85x49mm (7.91x3.35x1.92In) Weight ....................................................................................................... 380g (0.837Lb) Run time at 20C (68F) ............................................................................................ >10h Technical data sheet 3 The technical data sheet contains the transmitting unit configuration and shows the matching between commands sent and machine functions/movements. It also contains the wiring diagram showing the connection between the receiving unit and the machine. Each technical data sheet must be filled in, checked and signed by the installer, who is responsible for a correct wiring. A technical data sheet must always be kept toghether with this manual (always keep a copy of the technical data sheet when it is used for administrative purposes). The wiring of the receiving unit outputs must always reflect the wiring indicated in the technical data sheet. AUTEC - Air series LILK6E00-02 6 4 Plates Plates 4.1 Plates on units LK6, LK8 and LK6 DF belonging to a radio remote control system Plate Position Content radio remote control identification plate Key ID 0-1 (if present). Battery housing (if the ID internal tx memory is present). transmitting unit identification plate Battery housing. technical data plate Battery housing. Radio remote control serial number
(S/N). Manufacturing year, bar code and transmitting unit identification number
(TU ID). MODEL, TYPE and main transmitting unit technical data, marking and possible radio remote control marks. 4.2 Plates on units LK6, LK8 and LK6 DF belonging to a Take & release system Plate Position Content radio remote control identification plate Key ID 0-1 (if present). Battery housing (if the ID internal tx memory is present). transmitting unit identification plate Battery housing. technical data plate Battery housing. Radio remote control serial number
(S/N). Manufacturing year, bar code and transmitting unit identification number
(TU ID). MODEL, TYPE and main transmitting unit technical data, marking and possible radio remote control marks. LILK6E00-02 AUTEC - Air series Plates 4.3 Plates on units LK6, LK8 and LK6 DF belonging to a Multi Units or Multi receiver system Plate Position Content 7 radio remote control identification plate Key ID 0-1 (if present). Battery housing (if the ID internal tx memory is present). transmitting unit identification plate Battery housing. technical data plate Battery housing. Radio remote control serial number
(MULTI S/N). Manufacturing year, bar code and transmitting unit identification number
(TU ID). MODEL, TYPE and main transmitting unit technical data, marking and possible radio remote control marks. AUTEC - Air series LILK6E00-02 8 5 Light signals Light signals Light signals of units LK6 and LK8 5.1 In LK6 and LK8 transmitting units, a green LED [B] and a red LED [A] are always available, and they provide information regarding the radio remote control. A B C Red LED Green LED LEDs for Data Feedback function symbol Meaning This symbol indicates the red LED [A]. This symbol indicates the green LED [B]. The green LeD [B]
Meaning is off. .. is steady on. blinks fast. The transmitting unit is switched off. The transmitting and receiving unit do not communicate. The transmitting and receiving unit communicate. It is only possible to send commands after pressing the START pushbutton. blinks slowly (one blink per second). It is possible to send commands. LILK6E00-02 AUTEC - Air series Light signals 9 The red LeD [A]
is off. .. is steady on. .. blinks twice per second. Meaning The transmitting unit works correctly. At start-up, the STOP pushbutton is pressed or damaged. At least one of the commands that were checked at start-
up is enabled or damaged (see technical data sheet). .. blinks three times per second. At start-up,the battery is flat. .. is steady on for 2s. The transmitting unit does not work correctly. blinks slowly (one blink per second). The battery has less than 1h run time. .. blinks fast. The battery has a 10min run time. LeDs Meaning the green [B] and red [A] LeDs are steady on the green [B] and red [A] LeDs blink 3 times per second during start up. A wrong "Key ID 0-1" or "ID internal tx memory" has been inserted in the transmitting unit, or this is a "BACK-UP UNIT". The Key ID 0-1 is damaged or the ID internal tx memory is damaged or not present. .. the green [B] and red [A] LeDs blink alternately. 30 s left before the transmitting unit automatically switches off. The green LeD [B] blinks and the red LeD [A] is steady during start up. The UNPAIR procedure has been performed. See paragraph 6.3 to check the meaning of LEDs for Data Feedback function [C]. AUTEC - Air series LILK6E00-02 10 Light signals 5.2 Light signals of unit LK6 DF Display icons A B D e Red LED Green LED Battery Radio link The following icons are always available on the display of LK6 DF transmitting units:
- Red LED [A] and green LED [B] providing information about the radio remote control
- Battery [D] providing indication of the battery power level
- Radio link [E] providing indication of radio link strength. For further information provided on the display and related to the Data Feedback function, see paragraph 6.3. 5.2.1 red LeD [A] and green LeD [B]
The green LeD [B]
Meaning is off. .. is steady on. blinks fast. The transmitting unit is switched off. The transmitting and receiving unit do not communicate. The transmitting and receiving unit communicate. It is only possible to send commands after pressing the START pushbutton. blinks slowly (one blink per second). It is possible to send commands. LILK6E00-02 AUTEC - Air series Light signals 11 The red LeD [A]
is off. .. is steady on. .. blinks twice per second. Meaning The transmitting unit works correctly. At start-up, the STOP pushbutton is pressed or damaged. At least one of the commands that were checked at start-
up is enabled or damaged (see technical data sheet). .. blinks three times per second. At start-up,the battery is flat. .. is steady on for 2s. The transmitting unit does not work correctly. blinks slowly (one blink per second). The battery has less than 1h run time. .. blinks fast. The battery has a 10min run time. LeDs Meaning the green [B] and red [A] LeDs are steady on the green [B] and red [A] LeDs blink 3 times per second during start up. A wrong "Key ID 0-1" or "ID internal tx memory" has been inserted in the transmitting unit, or this is a "BACK-UP UNIT". The Key ID 0-1 is damaged or the ID internal tx memory is damaged or not present. .. the green [B] and red [A] LeDs blink alternately. 30 s left before the transmitting unit automatically switches off. The green LeD [B] blinks and the red LeD [A] is steady during start up. The UNPAIR procedure has been performed. 5.2.2 Battery [D]
The battery icon [D] has a coloured bar, whose length is proportional to the battery power level. symbol Meaning High power level (green bar). Medium power level (green bar). Low power level (red bar). AUTEC - Air series LILK6E00-02 12 Light signals 5.2.3 radio link [e]
Radio link [E] icon consists of four vertical bars. The amount of dark bars is proportional to the quality of radio link. symbol Meaning Strong radio link signal. Medium radio link signal. No radio link. LILK6E00-02 AUTEC - Air series General operating instructions 13 6 General operating instructions starting up the radio remote control 6.1 Starting up the radio remote control consists in establishing a radio link between the transmitting unit and the receiving unit. As required by standards ieC 60204-1 and ieC 60204-32, non authorised use of the machine must be prevented. The power keyswitch and/or the Pin CODe used for start up, make the radio remote control compliant with such requirement. If the transmitting unit does not have a power keyswitch, the radio remote control start up is protected by PIN CODE. On the contrary, when the transmitting unit needs a power keyswitch, radio remote control start up is protected by the power keyswitch itself. If the risk assessment requires further protection of the radio remote control start up, the PIN CODE may be activated. The PIN CODE consists of a sequence of commands to be carried out by activating the corresponding actuators during start up. The radio remote control will start up only with the correct sequence. Commands activated while typing the PIN CODE are not sent to the machine. The procedure to enable and modify a PIN CODE is provided in the document Menu of Transmitting Unit (MTU); you can also find this document in the dedicated section on Autec's website. 6.1.1 Power keyswitch start up (no Pin CODe) When the receiving unit is powered on, perform the following procedure:
Insert a charged battery in the transmitting unit (see paragraph 7.1.1) 1. 2. insert the power keyswitch in the transmitting unit (see paragraph 7.3.3) 3. press the START pushbutton until the green LED blinks slowly. AUTEC - Air series LILK6E00-02 14 General operating instructions 6.1.2 Pin CODe start up (no power keyswitch) Consider that the transmitting unit will switch off 3 seconds after last activation of an actuator. When the receiving unit is powered on, perform the following procedure:
1. press the START pushbutton until the green LED illuminates 2. activate the commands corresponding to PIN CODE in the correct sequence (PIN 1, PIN 2 and PIN 3 given in the technical data sheet). a. PIN 1 shall not be included in the start up procedure if it coincides with the START b. PIN 3 shall not be included in the start up procedure if it coincides with the START command. command. 3. press the START pushbutton until the green LED blinks slowly. Note: default PIN CODE set by AUTEC is:
- PIN 1=START pushbutton
- PIN 2=FUNCTION pushbutton
- PIN 3=START pushbutton. Custom PIN CODE is set by Autec upon request by the machine's manufacturer or by those who decided to install the radio remote control. 6.1.3 Power keyswitch and Pin CODe start up When the receiving unit is powered on, perform the following procedure:
Insert a charged battery in the transmitting unit (see paragraph 7.1.1) 1. 2. insert the power keyswitch in the transmitting unit (see paragraph 7.3.3). Consider that the transmitting unit will switch off 3 seconds after last activation of an actuator. 3. press the START pushbutton until the green LED illuminates 4. activate the commands corresponding to PIN CODE in the correct sequence (PIN 1, PIN 2 and PIN 3 given in the technical data sheet). a. PIN 1 shall not be included in the start up procedure if it coincides with the START b. PIN 3 shall not be included in the start up procedure if it coincides with the START command. command. 5. press the START pushbutton until the green LED blinks slowly. LILK6E00-02 AUTEC - Air series General operating instructions 15 6.2 Command activation When the radio remote control is started, it is possible to move the pushbuttons and switches corresponding to the command you want to perform. The user must be properly trained about the symbols on the transmitting unit panel, to be aware of the matching between actuators and movements on the machine (symbols used are defined by the machine manufacturer according to the functions of the machine). 6.3 Data Feedback Function The user receives information and/or signals concerning the controlled machine by means of the Data Feedback function. During normal radio remote control operation, pay particular attention to the indications displayed and signalled by the display or through the LEDs: they can be helpful to evaluate the machine working status. Any information shown and signalled on the display or through the LeDs can never be considered or used as a safety signal or for legal metrology. When operating and moving the machine, remember that the radio remote control does not intervene autonomously when potential hazardous situations are displayed and signalled. 6.3.1 Operation with display If the transmitting unit has a display, it is possible to show signal icons, measurements collected from the machine and their description. The machine manufacturer chooses which information are displayed and the way they are displayed (icons and/or measurements and/or descriptions). 6.3.2 Operation with LeD If the transmitting unit has an LED array, specific machine conditions are signalled if they are on (i.e. load limits, limit switch, ). The signalled conditions depend on the settings chosen by the machine manufacturer. AUTEC - Air series LILK6E00-02 16 General operating instructions 6.4 radio link interruption When the radio link is incorrect or interrupted, the receiving unit autonomously stops the radio remote control. The green LED on the transmitting unit switches from blinking slowly to fast blinking or steady on. Press the START pushbutton to start the radio remote control. 6.5 Transmitting unit automatic switch off The transmitting unit automatically switches off when:
- the battery is flat (see paragraph 6.5.1)
- the radio remote control is not used for a certain time (see paragraph 6.5.2) Press the START pushbutton to start the radio remote control. 6.5.1 Low battery The transmitting unit indicates if the battery is not sufficiently charged (the red LED blinks fast):
- the red LED blinks slowly (one blink per second): the battery has less than 1h run time.
- the red LED blinks fast: the battery has a 10 minute run time from the first signal, after which the transmitting unit automatically switches off. The battery needs to be replaced with a charged one (see paragraph 7.1). 6.5.2 When the transmitting unit is not used If the transmitting units remains started with no enabled commands, it will automatically switch off after a predetermined time frame.This time frame is specified in the technical data sheet (SWITCH-OFF). Before the transmitting unit switches off automatically, the green and red LEDs blink alternating for 30 seconds. Activating any actuator corresponding to a movement command reduces the predetermined automatic switch-off time (SWITCH-OFF) to zero. 6.6 Switching off the transmitting unit The transmitting unit shall be switched off each time work is stopped. Voluntary transmitting unit's switch off occurs:
- when the power keyswitch (if present) is turned anti-clockwise
- when battery is removed (see paragraph 7.1.2)
- when the STOP pushbutton is pressed. LILK6E00-02 AUTEC - Air series Operation 7 Operation 7.1 Battery 17 The Air series' transmitting units can only be powered by Autec rechargeable batteries. see the battery charger manual enclosed in the packaging with the battery charger for any warnings and instructions regarding the batteries. 7.1.1 Battery insertion Push the battery towards the contacts on the transmitting unit and insert it inside the housing. 7.1.2 Battery removal Push the battery towards the contacts on the transmitting unit and remove it from the housing. 7.1.3 Battery run time indicator LK6 and LK8 transmitting units Perform the following procedure to check the run time of the battery in the LK6 and LK8 transmitting units:
1. switch off the transmitting unit and unlock the STOP pushbutton 2. activate command S1 (check in the technical data sheet which actuator it corresponds to) and press the START pushbutton until LED 1, LED 2 and LED 3 (indicating battery level) illuminate:
- 1 LED on: low level
- 2 LEDs on: medium level
- 3 LEDs on: maximum level. Run time indication disappears after some seconds. LK6 DF transmitting unit See paragraph 5.2.2 to check the run time of the battery in the LK6 DF transmitting unit. AUTEC - Air series LILK6E00-02 18 Operation iD internal tx memory 7.2 The transmitting unit may require the "ID internal tx memory", where the radio remote control's address is stored.The technical data sheet indicates if the "ID internal tx memory" is required. Power keyswitch 7.3 The transmitting unit may have a power keyswitch. It can either be:
- mechanical key (see paragraph 7.3.1)
- Key ID 0-1 (see paragraph 7.3.2). 7.3.1 Mechanical key The mechanical key makes it possible to power the transmitting unit. When the mechanical key is required to be used in a transmitting unit, the radio remote control cannot work if it is not inserted. 7.3.2 Key iD 0-1 The "Key ID 0-1" makes it possible to power the transmitting unit. It stores the radio remote control's address. Therefore, the "Key ID 0-1" can only be used in the transmitting unit belonging to its related radio remote control: when the transmitting unit requires the "Key ID 0-1", the radio remote control cannot work if it is not inserted. The technical data sheet indicates if the "Key ID 0-1" is required. As the radio remote control address is stored in the "Key ID 0-1", use it with utmost care to reduce risks that may result from incorrect handling. 7.3.3 power keyswitch insertion Perform the following operations to insert the power keyswitch:
1. push the power keyswitch inside the corresponding housing 2. rotate the power keyswitch clockwise. 7.3.4 power keyswitch removal Perform the following operations to remove the power keyswitch:
3. rotate the power keyswitch anticlockwise 4. pull the power keyswitch to remove it from the corresponding housing. LILK6E00-02 AUTEC - Air series Operation 19 7.3.5 BACK-UP UniT If the main transmitting unit cannot be used because it has been lost or damaged, it can be replaced with a transmitting unit called "BACK-UP UNIT". It is identical to the unit that cannot be used anymore; the only difference is the presence of the plate BACK-UP UNIT on the battery housing. set DiP switch 2 in the "BACK-UP UniT" as shown in the technical data sheet. if the transmitting unit that can no more be used requires either a "Key iD 0-1" or an "iD internal tx memory" (see technical data sheet), move it to the
"BACK-UP UniT" and perform the address saving procedure described below. if the transmitting unit that can no more be used does not require either a
"Key iD 0-1" or an "iD internal tx memory" (see technical data sheet), perform the PAir procedure to pair the BACK-UP UniT with a receiving unit (the technical data sheet shows which PAir procedure to use). Address storage With fully charged battery and power keyswitch in the "BACK-UP UNIT", perform this procedure:
1. press the START pushbutton until the green and red LEDs light up. 2. wait until the green LED blinks slowly 3. within 3 seconds, activate in sequence the commands corresponding to PIN 1, PIN 2 and PIN 3 that compose the PIN code given in the technical data sheet. If the PIN code is incorrect, the red LED illuminates and the transmitting unit switches off. In this case, the storage procedure shall be repeated. If the PIN code is correct, the green LED turns steady on and the transmitting units switches off: this indicates that the address has been stored in the "BACK-UP UNIT". It is now possible to start the radio remote control and control the machine with the "BACK-UP UNIT"
transmitting unit. AUTEC - Air series LILK6E00-02 20 Operation sTArT pushbutton 7.4 The START pushbutton is used to:
- start the radio remote control (see paragraph 6.1)
- activate the horn when the radio remote control is started. FUnCTiOn pushbutton 7.5 The FUNCTION pushbutton can be matched with different relay functions on the receiving unit (see technical data sheet). 7.6 sTOP pushbutton The sTOP pushbutton should be pressed when it is necessary to immediately stop the machine when a dangerous condition occurs. When the STOP pushbutton is pressed, the machine stops and the transmitting unit switches off. To start working again after the STOP pushbutton has been pressed, do the following:
- make sure that the working and usage conditions are safe
- pull or turn the STOP pushbutton in the arrow direction to unlock it
- start up the radio remote control. 7.7 DisPLAY pushbutton (if the transmitting unit has a display) This pushbutton is used to:
- activate the display lighting, if it is off
- cyclically scroll the information on the display in two different modes:
- manual: the lines scroll up each time the pushbutton is pressed
- automatic: when the DISPLAY pushbutton is pressed for 3 seconds, the lines scroll automatically. If the DISPLAY pushbutton is pressed again, it switches back to manual mode. It is not possible to scroll the lines if icons only are displayed. The display lighting stays on for a time set by the machine manufacturer. LILK6E00-02 AUTEC - Air series Malfunction signalled by the transmitting unit 21 Malfunction signalled by the transmitting unit 8 Use the light signals on the transmitting unit to identify the radio remote control malfunction. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. signals Possible reason solutions The green LeD is steady on. The transmitting and receiving unit do not communicate. The green LeD blinks fast. Temporary loss of radio link. Start up the radio remote control. If the radio remote control does not start up, check that the receiving unit is powered on. Bring the actuators corresponding to movement commands to the rest position and press the START pushbutton until the green LED blinks slowly. The green LeD blinks slowly
(one blink per second). The receiving unit may not work correctly. See "Receiving unit signals" in Part D of the manual. The red LeD is steady on during start up The STOP pushbutton is pressed or damaged. Unlock the STOP pushbutton or contact the support service. The red LeD blinks twice per second during start up. The red LeD blinks three times per second during start up. At least one of the commands that were checked at start-up is enabled or damaged (see technical data sheet). Bring the actuators corresponding to the commands checked during start up to the rest position or contact the support service. The battery is flat. Replace the battery with a charged one. The red LeD is steady on for two seconds. The transmitting unit does not work correctly. Contact the support service. The green and red LeDs are steady on. A wrong "Key ID 0-1" or
"ID internal tx memory"
has been inserted in the transmitting unit. You're using a "BACK-
UP UNIT" with the "Key ID 0-1" or "ID internal tx memory" of the transmitting unit that has been replaced. Use the correct "Key ID 0-1" or "ID internal tx memory". Store the address in the "BACK-UP UNIT" (see paragraph 7.3.5). AUTEC - Air series LILK6E00-02 22 Malfunction signalled by the transmitting unit signals Possible reason solutions The green and red LeDs blink three times per second during start up. The green LeD blinks and the red LeD is steady on during start up. The Key ID 0-1 is damaged or the ID internal tx memory is damaged or not present. The procedure corresponding to the UNPAIR submenu and given in the document
"Menu of Transmitting Unit (MTU)" has been carried out. Contact the support service. Contact the support service. LILK6E00-02 AUTEC - Air series
1 | User Manual 6 | Users Manual | 1.73 MiB | May 10 2015 |
Traduction de la notice d'origine Srie Air Partie C : Units de transmission LK6, LK8 et LK6 DF SommAire 1 2 3 4 5 6 Description ............................................................................................................ 3 1.1 Description des units LK6 et LK8 ................................................................... 3 1.2 Description de l'unit LK6 DF ........................................................................... 4 Donnes techniques ............................................................................................. 5 2.1 Donnes techniques des units LK6 et LK8 ..................................................... 5 2.2 Donnes techniques de l'unit LK6 DF ............................................................ 5 Fiche technique ..................................................................................................... 5 Plaques .................................................................................................................. 6 4.1 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande .......... 6 4.2 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande Take &
Release ........................................................................................................... 6 4.3 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande Multi Units ou Multi Receiver ............................................................................................. 7 Signalisations lumineuses ................................................................................... 8 5.1 Signaux lumineux des units LK6 et LK8 ......................................................... 8 5.2 Signaux lumineux de l'unit LK6 DF ............................................................... 10 instructions gnrales de fonctionnement ........................................................ 13 6.1 Dmarrage de la radiocommande .................................................................. 13 6.2 Activation des commandes ............................................................................ 15 6.3 Fonction Data Feedback ................................................................................ 15 6.4 Interruption de la liaison radiolectrique ......................................................... 16 LILK6F00-02 AUTEC 6.5 Coupure automatique de lunit de transmission ............................................ 16 6.6 Coupure de l'unit de transmission ................................................................ 16 Fonctionnement .................................................................................................. 17 7.1 Batterie .......................................................................................................... 17 7.2 ID internal tx memory ..................................................................................... 18 7.3 Cl de dmarrage .......................................................................................... 18 7.4 Touche START .............................................................................................. 20 7.5 Touche FUNCTION ........................................................................................ 20 7.6 Bouton-poussoir de STOP ............................................................................. 20 7.7 Bouton-poussoir DISPLAY (si un afficheur est mont sur lunit de transmission) ................................................................................................. 20 Dysfonctionnements signals par lunit de transmission .............................. 21 7 8 LILK6F00-02 AUTEC Description 1 Description 1.1 Description des units LK6 et LK8 LK A 3 J H G BM C D E F N Voyant Actionneur (slecteur, bouton) (si prsent) Batterie Cl de dmarrage (si prsente) Sige du logement de la batterie Plaque didentification de lunit de transmission Plaque didentification de la radiocommande A B C D e F G P H J K L m N P Plaque des donnes techniques Touche/bouton-poussoir de START Touche FUNCTION Touches des commandes Bouton-poussoir de STOP Interrupteur DIP Connecteur pour ID internal tx memory AUTEC - Srie Air LILK6F00-02 4 Description 1.2 Description de l'unit LK6 DF ML A BN C D E F K J H G P Afficheur Actionneur (slecteur, bouton) (si prsent) Batterie Cl de dmarrage (si prsente) Sige du logement de la batterie Plaque didentification de lunit de transmission Bouton DISPLAY A B C D e F G Q H J K L m N P Q Plaque didentification de la radiocommande Plaque des donnes techniques Touche/bouton-poussoir de START Touche FUNCTION Touches des commandes Bouton-poussoir de STOP Interrupteur DIP Connecteur pour "ID internal tx memory"
LILK6F00-02 AUTEC - Srie Air Donnes techniques 2 Donnes techniques 5 2.1 Donnes techniques des units LK6 et LK8 Alimentation (batterie MHM03) .............................................................................. 3.6 V Alimentation (batterie LPM01) ............................................................................... 3.7 V Antenne .................................................................................................................. interne Matire de l'enveloppe ................................................................................. PA 6 (20%fg) Indice de protection .................................................................................... IP65 (NEMA 4) Dimensions ................................................................ 201x85x49 mm (7,91x3,35x1,92 In) Poids ....................................................................................................... 380 g (0,837 Lb) Autonomie 20C (68F) :
- avec batterie MHM03 .................................................................................................. >8h
- avec batterie LPM01 ................................................................................................. >16h 2.2 Donnes techniques de l'unit LK6 DF Alimentation (batterie LPM01) ............................................................................... 3.7 V Antenne .................................................................................................................. interne Matire de l'enveloppe ................................................................................. PA 6 (20%fg) Indice de protection .................................................................................... IP65 (NEMA 4) Dimensions ................................................................ 201x85x49 mm (7,91x3,35x1,92 In) Poids ....................................................................................................... 380 g (0,837 Lb) Autonomie 20C (68F) .......................................................................................... >10h Fiche technique 3 La fiche technique reporte la configuration de lunit de transmission en indiquant la correspondance entre les commandes envoyes et les fonctions ou les mouvements de la machine. Elle reporte, par ailleurs, le schma du cblage de l'unit de rception avec la machine. Chaque fiche technique doit tre compile, contrle et signe par l'installateur responsable du cblage. Une fiche technique doit toujours rester jointe au prsent manuel (si on l'utilise pour des dmarches administratives, toujours en garder une copie). Le cblage des sorties de lunit de rception doit toujours correspondre aux indications de la fiche technique. AUTEC - Srie Air LILK6F00-02 6 4 Plaques Plaques 4.1 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande Plaque Position informations reportes plaque didentification de la radiocommande plaque didentification de lunit de transmission Key ID 0-1 (si prsente). Logement de la batterie
(si la ID internal tx memory est prsente). Logement de la batterie. plaque des donnes techniques Logement de la batterie. Le numro de srie de la radiocommande (S/N). Lanne de fabrication, le code barres et le numro d'identification de lunit de transmission (TU ID). Le MODEL, le TYPE et les principales donnes techniques de lunit de transmission, le marquage et les marques ventuelles de la radiocommande. 4.2 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande Take & release Plaque Position informations reportes plaque didentification de la radiocommande plaque didentification de lunit de transmission Key ID 0-1 (si prsente). Logement de la batterie
(si la ID internal tx memory est prsente). Logement de la batterie. plaque des donnes techniques Logement de la batterie. Le numro de srie de la radiocommande (S/N). Lanne de fabrication, le code barres et le numro d'identification de lunit de transmission (TU ID). Le MODEL, le TYPE et les principales donnes techniques de lunit de transmission, le marquage et les marques ventuelles de la radiocommande. LILK6F00-02 AUTEC - Srie Air Plaques 7 4.3 Plaques dans les units LK6, LK8 et LK6 DF dans une radiocommande multi Units ou multi receiver Plaque Position informations reportes plaque didentification de la radiocommande plaque didentification de lunit de transmission Key ID 0-1 (si prsente). Logement de la batterie
(si la ID internal tx memory est prsente). Logement de la batterie. plaque des donnes techniques Logement de la batterie. Le numro de srie de la radiocommande (MULTI S/N). Lanne de fabrication, le code barres et le numro d'identification de lunit de transmission (TU ID). Le MODEL, le TYPE et les principales donnes techniques de lunit de transmission, le marquage et les marques ventuelles de la radiocommande. AUTEC - Srie Air LILK6F00-02 8 5 Signalisations lumineuses Signalisations lumineuses Signaux lumineux des units LK6 et LK8 5.1 Les units de transmission LK6 et LK8 prsentent toujours un voyant vert [B] et un voyant rouge [A] fournissant les informations relatives la radiocommande. A B C Voyant rouge Voyant vert Voyant pour la fonction Data Feedback Symbole Signification Ce symbole indique le voyant rouge [A]. Ce symbole indique le voyant vert [B]. Le voyant vert [B] ... Signification est teint. Lunit de transmission est teinte. est allum fixe. Lunit de transmission et l'unit de rception ne communiquent pas entre elles. clignote rapidement. clignote lentement (un clignotement par seconde). Les units de transmission et de rception communiquent entre elles. Il est possible d'envoyer des commandes uniquement aprs avoir press la touche START. On peut envoyer des commandes. LILK6F00-02 AUTEC - Srie Air Signalisations lumineuses 9 Le voyant rouge [A] ... Signification est teint. Lunit de transmission fonctionne correctement. est allum fixe. .. clignote deux fois par seconde. Au dmarrage, le bouton-poussoir de STOP est enfonc ou en dfaut. Au moins l'une des commandes contrles au dmarrage est active ou en dfaut (voir la fiche technique). .. clignote trois fois par seconde. Lors du dmarrage, la batterie est dcharge. .. est allum fixe pendant 2 secondes. clignote lentement (un clignotement par seconde). Lunit de transmission ne fonctionne pas correctement. L'autonomie de la batterie est de moins de 1h. clignote rapidement. L'autonomie de la batterie est de 10mn. Les voyants Signification
... vert [B] et rouge [A] sont allums fixes. une Key ID 0-1 ou une ID internal tx memory errone a t saisie dans l'unit de transmission, ou celle-
ci est une BACK-UP UNIT . .. vert [B] et rouge [A] clignotent 3 fois par seconde lors du dmarrage. La Key ID 0-1 est en panne ou la ID internal tx memory est en panne ou elle n'est pas saisie. .. vert [B] et rouge [A] clignotent alternativement. Il manque 30 s la coupure automatique de lunit de transmission. Le voyant vert [B] clignote et le voyant rouge [A] est allum fixe lors du dmarrage. La procdure relative au sous-menu UNPAIR a t effectue. Pour la signalisation des voyants pour la fonction Data Feedback [C], voir le paragraphe 6.3. AUTEC - Srie Air LILK6F00-02 10 Signalisations lumineuses 5.2 Signaux lumineux de l'unit LK6 DF Icnes de l'afficheur Voyant rouge Voyant vert Batterie Liaison radiolectrique A B D e Sur l'afficheur de l'unit de transmission LK6 DF figurent toujours les icnes suivantes :
- Voyant rouge [A] et Voyant vert [B] qui fournissent des informations relatives la
- Batterie [D] qui fournit une indication du niveau de charge de la batterie
- Branchement radio-lectrique [E] qui fournit une indication sur la qualit de la liaison radiocommande radiolectrique. Pour les autres informations fournies par l'afficheur et relatives la fonctionnalit Data Feedback, voir le paragraphe 6.3. 5.2.1 Voyant rouge [A] et Voyant vert [B]
Le voyant vert [B] ... Signification est teint. Lunit de transmission est teinte. est allum fixe. Lunit de transmission et l'unit de rception ne communiquent pas entre elles. clignote rapidement. clignote lentement (un clignotement par seconde). Les units de transmission et de rception communiquent entre elles. Il est possible d'envoyer des commandes uniquement aprs avoir press la touche START. On peut envoyer des commandes. LILK6F00-02 AUTEC - Srie Air Signalisations lumineuses 11 Le voyant rouge [A] ... Signification est teint. Lunit de transmission fonctionne correctement. est allum fixe. .. clignote deux fois par seconde. Au dmarrage, le bouton-poussoir de STOP est enfonc ou en dfaut. Au moins l'une des commandes contrles au dmarrage est active ou en dfaut (voir la fiche technique). .. clignote trois fois par seconde. Lors du dmarrage, la batterie est dcharge. .. est allum fixe pendant 2 secondes. clignote lentement (un clignotement par seconde). Lunit de transmission ne fonctionne pas correctement. L'autonomie de la batterie est de moins de 1h. clignote rapidement. L'autonomie de la batterie est de 10mn. Les voyants Signification
... vert [B] et rouge [A] sont allums fixes. une Key ID 0-1 ou une ID internal tx memory errone a t saisie dans l'unit de transmission, ou celle-
ci est une BACK-UP UNIT . .. vert [B] et rouge [A] clignotent 3 fois par seconde lors du dmarrage. La Key ID 0-1 est en panne ou la ID internal tx memory est en panne ou elle n'est pas saisie. .. vert [B] et rouge [A] clignotent alternativement. Il manque 30 s la coupure automatique de lunit de transmission. Le voyant vert [B] clignote et le voyant rouge [A] est allum fixe lors du dmarrage. La procdure relative au sous-menu UNPAIR a t effectue. 5.2.2 Batterie [D]
Sur l'icne Batterie [D] figure une barre colore de longueur proportionnelle au niveau de charge de la batterie. Symbole Signification Niveau de charge lev (barre de couleur verte). Niveau de charge moyen (barre de couleur verte). Niveau de charge bas (barre de couleur rouge). AUTEC - Srie Air LILK6F00-02 12 Signalisations lumineuses 5.2.3 Liaison radiolectrique [e]
Licne Liaison radiolectrique [E] est constitue de quatre barres verticales. Le nombre de barres obscurcies est proportionnel la qualit de la liaison radiolectrique. Symbole Signification Excellente qualit de la liaison radiolectrique. Qualit moyenne de la liaison radiolectrique. Liaison radiolectrique absente. LILK6F00-02 AUTEC - Srie Air Instructions gnrales de fonctionnement 13 6 instructions gnrales de fonctionnement 6.1 Dmarrage de la radiocommande Le dmarrage de la radiocommande consiste instaurer la liaison radiolectrique entre les units de transmission et de rception. Comme requis par les normes ieC 60204-1 et ieC 60204-32, il est interdit d'utiliser la machine sans autorisation. La cl de dmarrage et/ou le PiN CoDe utiliss pour le dmarrage, rendent la radiocommande conforme cette exigence. Lorsque la cl de dmarrage n'est pas prvue dans lunit de transmission, le dmarrage de la radiocommande est protg au moyen du PIN CODE. Vice-versa, lorsque la cl de dmarrage est prvue dans lunit de transmission, le dmarrage de la radiocommande est protg au moyen de la cl de dmarrage. Si l'valuation des risques requiert une protection supplmentaire du dmarrage de la radiocommande, il est possible d'habiliter aussi le PIN CODE. Le PIN CODE se compose d'une squence de commandes excuter par l'activation des actionneurs correspondants pendant la phase de dmarrage. La radiocommande ne dmarra que si la squence est correctement ralise. Les commandes actives pendant la saisie du PIN CODE ne sont pas envoys la machine. La procdure d'habilitation et de modification du code PIN CODE est indique dans le document Menu of Transmitting Unit (MTU) prsente aussi la rubrique correspondante du site internet d'Autec. 6.1.1 Dmarrage au moyen de la cl de dmarrage (sans PiN CoDe) Avec l'unit de rception alimente, excuter la procdure suivante :
1. 2. 3. appuyer sur la touche START jusqu' ce que le voyant vert clignote lentement. insrer une batterie charge dans l'unit de transmission (voir le paragraphe 7.1.1) insrer la cl de dmarrage dans l'unit de transmission (voir le paragraphe 7.3.3) AUTEC - Srie Air LILK6F00-02 14 Instructions gnrales de fonctionnement 6.1.2 Dmarrage au moyen du PiN CoDe (sans cl de dmarrage) Considrer que l'unit de transmission s'teindra si plus de 3 secondes se sont coules entre l'activation d'un actionneur et le suivant . Avec l'unit de rception alimente, excuter la procdure suivante :
1. appuyer sur la touche START jusqu' l'allumage du voyant vert, 2. activer les commandes correspondantes au CODE PIN selon la squence correcte (PIN 1, PIN 2 et PIN 3 comme indiqu dans la fiche technique). a. PIN 1 ne dot pas tre inclus dans la procdure de dmarrage si elle concide avec b. PIN 3 ne dot pas tre inclus dans la procdure de dmarrage si elle concide avec la commande START. la commande START. 3. appuyer sur la touche START jusqu' ce que le voyant vert clignote lentement. Remarque : Le PIN CODE prdfini rgl par AUTEC est le suivant :
- PIN 1=touche START
- PIN 2=touche FUNCTION
- PIN 3=touche START. Le rglage ralis par Autec d'un PIN CODE personnalis ne s'effectue que sur demande du fabricant de la machine ou de la personne qui a dcid d'installer la radiocommande. 6.1.3 Dmarrage au moyen de la cl de dmarrage et du PiN CoDe Avec l'unit de rception alimente, excuter la procdure suivante :
1. 2. insrer une batterie charge dans l'unit de transmission (voir le paragraphe 7.1.1) insrer la cl de dmarrage dans l'unit de transmission (voir le paragraphe 7.3.3). Considrer que l'unit de transmission s'teindra si plus de 3 secondes se sont coules entre l'activation d'un actionneur et le suivant . 3. appuyer sur la touche START jusqu' l'allumage du voyant vert, 4. activer les commandes correspondantes au CODE PIN selon la squence correcte (PIN 1, PIN 2 et PIN 3 comme indiqu dans la fiche technique). a. PIN 1 ne dot pas tre inclus dans la procdure de dmarrage si elle concide avec b. PIN 3 ne dot pas tre inclus dans la procdure de dmarrage si elle concide avec la commande START. la commande START. 5. appuyer sur la touche START jusqu' ce que le voyant vert clignote lentement. LILK6F00-02 AUTEC - Srie Air Instructions gnrales de fonctionnement 15 6.2 Activation des commandes Avec la radiocommande dmarre, il est possible d'actionner les touches, les boutons-
poussoirs et les slecteurs relatifs la commande excuter. Pour connatre la correspondance entre les actionneurs et les manuvres de la machine, loprateur devra tre correctement form sur les symboles utiliss sur le panneau de lunit de transmission (les symboles utiliss sont dcids par le constructeur de la machine en fonction de son caractre oprationnel et fonctionnel). Fonction Data Feedback 6.3 La fonction Data Feedback rend disponibles, l'oprateur, les informations et/ou les signalisations relatives la machine commande. Lors du fonctionnement courant de la radiocommande, prter attention aux indications visualises et signales par l'afficheur ou par les voyants : elles reprsentent une aide l'valuation de la situation oprationnelle dans laquelle se trouve la machine. Toute indication visualise et signale par l'afficheur ou par les voyants ne pourra jamais tre considre ou utilise comme signalisation de scurit ou comme mtrologie lgale. Lorsque l'on opre et que l'on actionne la machine, tenir compte du fait que la radiocommande n'intervient pas de manire autonome dans les situations risque visualises et signales. 6.3.1 Fonctionnement avec afficheur Si, sur l'unit de transmission, se trouve un afficheur, on pourra visualiser les icnes de signalisation, les valeurs des mesures effectues sur la machine et leur description. Les informations et la modalit avec laquelle elles sont visualises (icnes et/ou mesures et/ou descriptions) dpendent de la configuration choisie par le constructeur de la machine. 6.3.2 Fonctionnement avec voyants Si, sur l'unit de transmission, se trouvent des voyants, leur allumage signale des tats particuliers de la machine (par exemple, limites de charge, fins de course, etc.). Les tats signals dpendent de la configuration choisie par le constructeur de la machine. AUTEC - Srie Air LILK6F00-02 16 Instructions gnrales de fonctionnement interruption de la liaison radiolectrique 6.4 Lorsque la liaison radiolectrique est mauvaise ou interrompue, l'unit de rception dcide d'elle-mme d'arrter la radiocommande. Le voyant vert de l'unit de transmission passe du clignotement lent au clignotement rapide ou l'allumage fixe. Pour dmarrer la radiocommande, appuyer sur la touche START. 6.5 Coupure automatique de lunit de transmission La coupure automatique de lunit de transmission intervient lorsque :
- la batterie est dcharge (voir le paragraphe 6.5.1),
- la radiocommande n'a pas t utilise sur une dure dtermine (voir le paragraphe 6.5.2), Pour dmarrer la radiocommande, appuyer sur la touche START. 6.5.1 Batterie dcharge L'unit de transmission signale que la batterie n'est pas suffisamment charge (le voyant rouge clignote rapidement):
- le voyant rouge clignote lentement (un clignotement par seconde) : au dbut de la signalisation, l'autonomie de la batterie est de moins de 1h.
- le voyant rouge clignote rapidement : au dbut de la signalisation, l'autonomie de la batterie est de 10 minutes ; l'chance de ces 10mn, l'unit de transmission s'teindra automatiquement. Il faut remplacer la batterie par une batterie charge (voir le paragraphe 7.1). 6.5.2 Non utilisation de l'unit de transmission Si l'unit de transmission reste active sur une dure dtermine sans insertion d'une commande de mouvement, elle s'teint automatiquement. Ce temps est report sur la fiche technique (SWITCH-OFF). Avant que l'unit de transmission ne s'teigne automatiquement, les voyants vert et rouge clignotent alternativement 30 secondes. En activant un actionneur quelconque relatif une commande de mouvement, on remet zro la dure prdfinie de la coupure automatique. 6.6 Coupure de l'unit de transmission Lunit de transmission doit tre teinte chaque fois le travail est suspendu. La coupure volontaire de l'unit de transmission intervient lorsque :
- lorsque la cl de dmarrage (si prsente) est tourne dans le sens inverse des aiguilles d'une montre
- lorsque la batterie est extraite (voir le paragraphe 7.1.2)
- la suite de l'enfoncement du bouton-poussoir de STOP. LILK6F00-02 AUTEC - Srie Air Fonctionnement 7 Fonctionnement 7.1 Batterie 17 Les units de transmission de la srie Air ne peuvent tre alimentes que par des batteries rechargeables Autec. Pour les instructions et les avertissements lis la batterie, voir le manuel du chargeur de batterie fourni dans la confection. insertion de la batterie 7.1.1 Pousser la batterie vers les contacts de l'unit de transmission et l'insrer dans son logement. 7.1.2 extraction de la batterie Pousser la batterie vers les contacts de l'unit de transmission et l'extraire de son logement. indication de l'autonomie de la batterie 7.1.3 Units de transmission LK6 et LK8 Pour vrifier l'autonomie de la batterie prsente dans les units de transmission LK6 et LK8, effectuer la procdure suivante :
1. teindre lunit de transmission et rarmer le bouton-poussoir de STOP, 2. activer la commande S1 (vrifier, sur la fiche technique, quel est l'actionneur correspondant) et appuyer sur la touche START jusqu' l'allumage du voyant 1, voyant 2 et du voyant 3 qui indiquent le niveau de charge de la batterie :
- 1 voyant allum : niveau faible
- 2 voyants allums : niveau intermdiaire
- 3 voyants allums : niveau maximal. Au bout de quelques secondes, l'indication de l'autonomie disparat. Unit de transmission LK6 DF Pour vrifier l'autonomie de la batterie prsente dans l'unit de transmission LK6 DF, voir le paragraphe 5.2.2. AUTEC - Srie Air LILK6F00-02 18 Fonctionnement iD internal tx memory 7.2 La ID internal tx memory dans laquelle l'adresse de la radiocommande est mmorise peut tre prvue l'intrieur de l'unit de transmission. On indique si la ID internal tx memory est prvue dans la fiche technique. 7.3 Cl de dmarrage Une cl de dmarrage peut tre prsente dans lunit de transmission. Elle peut tre de deux types :
- cl mcanique (voir le paragraphe 7.3.1)
- Key ID 0-1 (voir le paragraphe 7.3.2). 7.3.1 Cl mcanique La cl mcanique permet d'alimenter lunit de transmission. Lorsque la cl mcanique est prvue dans une unit de transmission, la radiocommande ne peut pas fonctionner si celle-
ci n'est pas insre. 7.3.2 Key iD 0-1 La Key ID 0-1 permet d'alimenter l'unit de transmission. L'adresse de la radiocommande est mmorise son intrieur. Donc, la Key ID 0-1 doit tre utilise exclusivement dans lunit de transmission de la radiocommande laquelle elle appartient : lorsque la Key ID 0-1 est prvue dans une unit de transmission, la radiocommande ne peut pas fonctionner si elle n'est pas saisie. On indique si la Key ID 0-1 est prvue dans la fiche technique. tant donn que l'adresse de la radiocommande est mmorise dans la Key ID 0-1, il faut l'utiliser avec trs attention pour rduire les risques qui peuvent survenir d'une gestion errone. insertion de la cl de dmarrage 7.3.3 Pour insrer la cl de dmarrage, suivre les oprations ci-dessous :
1. pousser la cl de dmarrage dans son logement tourner la cl de dmarrage dans le sens horaire. 2. 7.3.4 extraction de la cl de dmarrage Pour extraire la cl de dmarrage, suivre les oprations ci-dessous :
3. 4. tourner la cl de dmarrage dans le sens antihoraire tirer la cl de dmarrage pour la sortir de son logement. LILK6F00-02 AUTEC - Srie Air Fonctionnement 19 7.3.5 BACK-UP UNiT Si lunit de transmission n'est pas utilisable cause d'une perte ou d'un dfaut, on pourra la remplacer par une unit de transmission dite BACK-UP UNIT. Elle est identique l'unit qui n'est plus utilisable et se distingue uniquement par la prsence de l'inscription BACK-UP UNIT dans le logement de la batterie. rgler l'interrupteur DiP 2 de la BACK-UP UNiT comme indiqu dans la fiche technique. Si dans l'unit de transmission qui ne peut plus tre utilise il y a une Key ID 0-1 ou une ID internal tx memory (voir la fiche technique), dplacer celle-ci la BACK-UP UNIT et effectuer la procdure de mmorisation de l'adresse dcrite ci-dessous. Si dans l'unit de transmission qui ne peut plus tre utilise il n'y a pas de Key ID 0-1 ni de ID internal tx memory (voir la fiche technique), effectuer la procdure PAIR pour accoupler la BACK-UP UNIT une unit de rception (la procdure PAIR utiliser est indique dans la fiche technique). mmorisation de l'adresse Avec la batterie charge et cl de dmarrage insre dans la BACK-UP UNIT , raliser la procdure suivante :
1. appuyer sur la touche START jusqu' l'allumage des voyants vert et rouge. 2. attendre que le voyant vert clignote lentement 3. dans les 3 secondes, activer, en squence, les commandes relatives PIN 1, PIN 2 et PIN 3 constituant le code PIN report sur la fiche technique. Si le code PIN est erron, le voyant rouge s'allume, puis l'unit de transmission s'teint. Dans ce cas, il faudra rpter la procdure de mmorisation. Si le code PIN est correct, la mmorisation de l'adresse dans la BACK-UP UNIT est confirme par l'allumage fixe du voyant vert, suivi par la coupure de l'unit de transmission. On pourra dsormais dmarrer la radiocommande et commander la machine avec l'unit de transmission BACK-UP UNIT. AUTEC - Srie Air LILK6F00-02 20 Fonctionnement 7.4 Touche STArT La touche START sert :
- dmarrer la radiocommande (voir le paragraphe 6.1)
- actionner le klaxon lorsque la radiocommande est lance. Touche FUNCTioN 7.5 On pourra associer, la touche FUNCTION, diffrentes fonctions des relais sur l'unit de rception (voir la fiche technique). 7.6 Bouton-poussoir de SToP Le bouton-poussoir de SToP est enfonc lorsqu'il faut arrter immdiatement la machine cause d'une situation dangereuse. L'enfoncement du bouton-poussoir de STOP arrte la machine et teint galement lunit de transmission. Pour reprendre le travail aprs l'enfoncement du bouton-poussoir de STOP, il faut :
- vrifier que les conditions opratoires et d'utilisation sont scurises,
- rarmer le bouton-poussoir de STOP en le tirant et en le tournant dans le sens indiqu,
- dmarrer la radiocommande. 7.7 Bouton-poussoir DISPLAY (si un afficheur est mont sur lunit de transmission) Ce bouton-poussoir sert :
- activer l'clairage de l'afficheur s'il est teint,
- faire dfiler en boucle les informations sur l'afficheur de deux manires diffrentes:
- manuelle : chaque pression du bouton, les lignes dfilent d'une position sur l'autre,
- automatique : en maintenant le bouton DISPLAY enfonc 3 secondes, les lignes dfilent automatiquement. En appuyant de nouveau sur le bouton DISPLAY, on retourne en modalit manuelle. On ne peut pas faire dfiler les lignes si seules les icnes sont visualises. La dure de lclairage de l'afficheur a t dfinie par le constructeur de la machine. LILK6F00-02 AUTEC - Srie Air Dysfonctionnements signals par lunit de transmission 21 Dysfonctionnements signals par lunit de transmission 8 Rechercher le dysfonctionnement de la radiocommande en fonction des signalisations lumineuses de l'unit de transmission. Si le problme persiste aprs avoir appliqu l'action corrective indique, contacter le service d'assistance du constructeur de la machine. Signalisations Cause possible Actions correctives Le voyant verte est allum fixe. Lunit de transmission et l'unit de rception ne communiquent pas entre elles. Le voyant vert clignote rapidement. Perte momentane de la liaison radiolectrique. Dmarrer la radiocommande. Si la radiocommande ne dmarre pas, vrifier que lunit de rception est alimente. Porter les actionneurs relatifs aux commandes de mouvement en position de repos et appuyer sur la touche START jusqu'au clignotement lent du voyant vert. Le voyant vert clignote lentement
(un clignotement par seconde). L'unit de rception peut ne pas fonctionner correctement. Voir Signalisations de l'unit de rception dans la Partie D du manuel. Le voyant rouge est allum fixe lors du dmarrage. Le bouton-poussoir de STOP est enfonc ou en dfaut. Rarmer le bouton-poussoir d'arrt STOP ou contacter le service d'assistance. Le voyant rouge clignote deux fois par seconde lors du dmarrage. Le voyant rouge clignote trois fois par seconde lors du dmarrage. Le voyant rouge est allum fixe pendant deux secondes. Au moins l'une des commandes contrles au dmarrage est active ou en dfaut (voir la fiche technique). Porter les actionneurs relatifs aux commandes contrles au dmarrage sur la position de repos ou contacter le service d'assistance. La batterie est dcharge. Remplacer la batterie par une batterie charge. L'unit de transmission ne fonctionne pas correctement. Contacter le service d'assistance. AUTEC - Srie Air LILK6F00-02 22 Dysfonctionnements signals par lunit de transmission Signalisations Cause possible Actions correctives Une Key ID 0-1 ou une ID internal tx memory errone a t saisie dans l'unit de transmission. On utilise une BACK-
UP UNIT avec la Key ID 0-1 ou la ID internal tx memory de l'unit de transmission qui a t remplace. La Key ID 0-1 est en panne ou la ID internal tx memory est en panne ou elle n'est pas saisie. La procdure relative au sous-menu UNPAIR, reporte dans le document Menu of Transmitting Unit (MTU), a t effectue. Utiliser la Key ID 0-1 ou la ID internal tx memory correcte. Mmoriser l'adresse dans la BACK-UP UNIT (voir le paragraphe 7.3.5). Contacter le service d'assistance. Contacter le service d'assistance. Les voyants vert et rouge sont allums fixes. Les voyants vert et rouge clignotent 3 fois par seconde lors du dmarrage. Le voyant vert clignote et le voyant rouge est allum fixe lors du dmarrage. LILK6F00-02 AUTEC - Srie Air
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-10-05 | 915.05 ~ 927.75 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-10-05
|
||||
1 | Applicant's complete, legal business name |
Autec s.r.l.
|
||||
1 | FCC Registration Number (FRN) |
0011117231
|
||||
1 | Physical Address |
Via Pomaroli, 65
|
||||
1 |
Caldogno (VI), N/A 36030
|
|||||
1 |
Italy
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
g******@emcc.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OQA
|
||||
1 | Equipment Product Code |
LKNDA1DM
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A**** S****
|
||||
1 | Title |
Director
|
||||
1 | Telephone Number |
+39-0********
|
||||
1 | Fax Number |
+39-0********
|
||||
1 |
a******@autec.it
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Transceiver unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | This device is required to be professionally installed by a properly trained technician. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CMC Centro Misure Compatibilit srl
|
||||
1 | Name |
B****** R******
|
||||
1 | Telephone Number |
39044********
|
||||
1 | Fax Number |
39044********
|
||||
1 |
r******@cmclab.it
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 915.05000000 | 927.75000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC