all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 636.41 KiB | February 14 2022 | |||
1 2 |
|
Internal photos | Internal Photos | 1.38 MiB | February 14 2022 | |||
1 2 |
|
External photos | External Photos | 612.99 KiB | February 14 2022 | |||
1 2 |
|
Label and location | ID Label/Location Info | 163.88 KiB | February 14 2022 | |||
1 2 | BlockDiagram | Block Diagram | February 14 2022 | confidential | ||||
1 2 |
|
FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 61.30 KiB | February 14 2022 | |||
1 2 |
|
Letter of Authourization | Cover Letter(s) | 61.25 KiB | February 14 2022 | |||
1 2 | Operation Description | Operational Description | February 14 2022 | confidential | ||||
1 2 | SCH | Schematics | February 14 2022 | confidential | ||||
1 2 |
|
Test Report | Test Report | 3.71 MiB | February 14 2022 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 334.60 KiB | February 14 2022 | |||
1 2 | OP | Operational Description | February 14 2022 | confidential | ||||
1 2 |
|
RFExposure | RF Exposure Info | 140.62 KiB | February 14 2022 | |||
1 2 | Schematic | Schematics | February 14 2022 | confidential |
1 2 | User Manual | Users Manual | 636.41 KiB | February 14 2022 |
Trademarks Intelligent Technology Corp., Ltd., OTOFIX is a trademark of Autel registered in China, the United States, and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Autel Intelligent Technology Corp., Ltd. Disclaimer of Warranties and Limitation of Liabilities All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel Intelligent Technology Corp., Ltd. reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and limited to the product correctness of specifications, functions, and illustrations. including but not the contents, Autel Intelligent Technology Corp., Ltd. will not be liable for any direct, indirect damages or any economic consequential special, damages (including the loss of profits). incidental, IMPORTANT Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions. For Services and Support www.otofixtech.com
(833) 686-1349 (OTO-1FIX) (North America) 0086-755-86147779 (China) support@otofixtech.com For technical assistance in all other markets, please contact your local selling agent. i Safety Information For the safety of yourself and others, and to prevent damage to the device the safety and vehicles upon which it instructions presented throughout this manual should be read and understood by all persons operating or coming into contact with the device. is important is used, that it Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual. Please use the power adapter that has the CCC certificate and complies with related standards. Safety Messages When using the smart watch, please follow the tips in IMPORTANT . Those safety messages are provided to help prevent personal injury and equipment damage. IMPORTANT Do not drop your equipment or place heavy objects on it. Otherwise, the device may be damaged. The screen is made of glass. If the device is hit hard or squeezed by touch or remove the glass fragments from the heavy objects, do not device. Stop using the device immediately and contact technical support personnel for repair or replacement information. Keep the device away from high temperature or high pressure. The operating temperature of the device should be -20 C to 60 C, and the storage temperature should be -40 C to 85 C to avoid damage. Do not touch the device with rain, extreme humidity, sweat, or other liquids to avoid short circuit or fault. Do not remove or modify the device. Opening or modifying your equipment without authorization will void your warranty. Please use the charging base that comes with your purchase. Otherwise, the normal charging speed will be affected, resulting in abnormal charging, and even damage to the device. ii When your equipment reaches its service life, dispose of it in accordance with local environmental laws and regulations. Some internal parts may explode, leak or have adverse environmental effects if not handled properly. Do not use this device in places where the use of wireless devices is expressly prohibited, otherwise it will interfere with other electronic devices or cause other dangers. Electronic Device FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or Increase the separation into an between the equipment and receiver. Connect outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. relocate the receiving antenna. interference to radio or the equipment RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. iii CONTENTS Safety Information................................................................................................. ii Safety Messages................................................................................................... ii Electronic Device..................................................................................................iii Using This Manual................................................................................................. 1 1.1 Conventions.................................................................................................... 1 Start Using............................................................................................................... 3 2.1 OTOFIX Watch............................................................................................... 3 2.2 Smart Watch Buttons and Touch Screen................................................... 5 2.3 Power on/ Power off/ Reboot....................................................................... 7 2.4 Match the Smart Watch and Phone............................................................ 8 2.5 Commonly Used Function.............................................................................9 2.6 Do Not Disturb Mode................................................................................... 10 2.7 Upgrade the Smart Watch System and App............................................10 2.8 Factory Reset............................................................................................... 11 2.9 Charge the Device....................................................................................... 11 Basic Functions....................................................................................................13 3.1 Notification.....................................................................................................13 3.2 Make a Call................................................................................................... 14 3.3 Answer or Reject Calls................................................................................15 3.4 Play the Music.............................................................................................. 15 3.5 Stopwatch/ Timer......................................................................................... 16 3.6 Set a Clock....................................................................................................16 3.7 Use the Flashlight........................................................................................ 17 3.8 Use the Compass.........................................................................................18 3.9 Check the Weather Information................................................................. 18 Basic Functions....................................................................................................19 4.1 Scientific Exercise........................................................................................19 4.2 Activity Record..............................................................................................20 4.3 Track the Movement....................................................................................20 Health Management.............................................................................................21 iv 5.1 Measure the Heart Rate..............................................................................21 5.1.1 Measure the Heart Rate Continuously.............................................. 21 5.1.2 Measure the Exercise Heart Rate......................................................22 5.1.3 Measure the resting heart rate........................................................... 22 5.1.4 Heart rate notification........................................................................... 23 5.2 Sleep monitoring.......................................................................................... 24 5.3 Breath Training............................................................................................. 25 5.4 Blood oxygen saturation test......................................................................25 5.5 Stand reminder............................................................................................. 26 v Using This Manual This manual contains device usage instructions. The picture is only for reference, please make the object as the standard. 1.1 Conventions The following conventions are used. Bold text is used to highlight items such as buttons and menu options. Bold Text Example:
TapOK. Notes Example:
NOTE Important Example:
Notes and Important Messages A NOTE provides helpful information such as additional explanations, tips, and comments. Pair the watch and your vehicle before the Smart Vehicle Key work. IMPORTANT indicates a situation which, damage to the test equipment or vehicle. if not avoided, may result in IMPORTANT The product is not waterproof, please keep the watch and charging base dry before or in or after charging, or there are short circuits or other risks. 1 Hyperlink Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in electronic documents. Blue italic text indicates a selectable hyperlink and blue underlined text indicates a website link or an email address link. Illustrations Illustrations used in this manual are samples, the actual testing screen may vary for each smart watch being tested. Observe the menu titles and the on-screen instructions to make correct option selection. Procedures Example:
An arrow icon indicates a procedure. To power the smart watch on Long press thepower buttonto power on. Or the smart watch power on automatically when charging it. 2 Start Using OTOFIX Watch is a smart watch with a smart vehicle key function, which It also provides multi-dimensional supports remote control of vehicles. intelligent services, such as exercise status recording, health monitoring, music playing or storing and so on. This manual describes the structure and operation of the watch, and how to use it. IMPORTANT The smart watch comes with 4GB of memory and the available storage capacity is about 2.6GB because the system of watch will occupy some memory. 2.1 OTOFIX Watch Figure 2.1 Overview of the Smart Watch Speaker Microphone Smart Watch Ear Heart Rate Sensing Area Touch Screen Charging Contacts Power Button Smart Vehicle Key 3 To install the smart watch band Lay the smart watch flat with the back of the watch up, and the side with the buttons facing you. Insert the pogo pin on the watch band into the watch ear on the side near you Slide the metal buckle toward the side near you until it there is no space to move Align another side of pogo pin into the another watch ear and install it. Repeat these steps to install another watch band. Figure 2.2 Install the Watch Band NOTE Lay the smart watch flat with the back of the watch up, and slide the pogo pin to disassemble the watch band. 4 Figure 2.3 Wear the Smart Watch Wear the smart watch as the picture show. Attach the Heart Rate Sensing Area to the wrist to maintain a comfortable and fit wearing state. In order to ensure the accuracy of heart rate measurement, please wear the smart watch correctly. Avoid to wear the smart watch on joints. Do not be too loose or too tight in normal status, but wear tight during exercise. IMPORTANT The smart watch is made of professional health materials and has passed a If you feel strict skin allergy test, so you can wear it with confidence. uncomfortable when wearing your smart watch, please take it down and consult your doctor. Please wear your smart watch correctly, with appropriate tightness, and allow your skin to breathe. And keep the smart watch clean and dry. 2.2 Smart Watch Buttons and Touch Screen 5 Figure 2.4 Smart Watch Buttons Table 2.1 Power Button Description Operation Function Locked screenShort press to light up the screen. Short Press In the page of application list Short press to show the standby screen. In the page of standby screen Short press to show the access the application list. Power off: Long press for 2 seconds to power on. Long Press Power on: Long press for 5 seconds to show the shutdown or restart icon. Power on: Long press for 12 seconds to restart the smart watch. Table 2.2 Smart Vehicle Key Description Operation Function Short Press Short press to lock your car. Long Press Long press to unlock your car. IMPORTANT Pair the smart watch and your vehicle before the Smart Vehicle Key work. Table 2.3 Gesture Description Operation Function 6 Swipe the Screen to the Right or Left Swipe the screen to the right or left to switch between different interfaces. Swipe the Screen Right Swipe the screen to the right to return to the previous interface. In Normal Mode: Raise the wrist to brighten the screen and return to the standby screen. Raise Your Wrist You can also raise the wrist to brighten the screen and start the voice-recognition. In Sports Mode: Raise the wrist to displays the sports data interface. Put Down Your Wrist Put down your wrist to lock your smart watch. NOTE Setraise wrist screento brighten the screen when you wear the smart watch and rise the hand. You can tap the power button to enter the application listTap Display & brightnessraise wrist screen, turn on theraise wrist screen, set the beginning and end time . Set the time to lock the smart watch: You can tap the power button to enter the application list Tap Display & brightness auto screen time, set the time to lock the smart watch. In standby screen, swipe the screen right to show the interface of sports recording, music player, heart rate data, smart vehicle key. 2.3 Power on/ Power off/ Reboot To power the smart watch on Method 1: Long press thepower buttonto power on. Method 2: Charge the smart watch to power it on. IMPORTANT 7 When battery is running low, the smart watch is unable to power on. To power the smart watch off Method 1: Long press thepower button, tapPower off. Method 2: Tap thepower buttonto enter the application list Tap Swipe down the screen to chooseSystemClickPower off. IMPORTANT When battery is lower than 5%, the smart watch power off automatically and can not be powered on. To reboot the smart watch Method 1: Long press thepower button, tapReboot. Method 2: Tap thepower buttonto enter the application list Tap Swipe down the screen to chooseSystemClickPower off. To force a reboot Long press thepower buttonfor about 12 seconds to reboot. 2.4 Match the Smart Watch and Phone By default, the smart watch bluetooth is on. Android users and iOS users can follow these steps to match. To match the smart watch and phone with Android system DownloadAutel LinkApp through the phone App market, or scan theAutel LinkApp QR. Figure 2.5 Autel Link App QR Register and log onto your account ofAutel LinkApp. Open the phoneBluetooth, access theAutel LinkApp, tap Devices +Scan QR to addor Add by model. 8 When chooseScan QR to add, then scan the QR on the smart watch screen with your phone. When chooseAdd by model, then tapOTOFIX watchStart Pairingselect your devicestart to match. When the match requirement appear on the smart watch, clickPair thenOK to finish the match. To match the smart watch and phone with iOS system DownloadAutel LinkApp through the phone App market, or Autel LinkApp QR. Enter the phone systemOpen the phoneBluetoothCheck the smart watch name that you need to matchEnter theAutel Link AppScan the smart watch QRChoose the correct smart watch nameStart to match. NOTE When match the phone and the smart watch successfully, the smart watch will automatically synchronize time with the phone. 2.5 Commonly Used Function After successfully matching, you can accessAutel LinkApp to apply some commonly used functions, such as Face Gallery, Music, Clock, Contacts, Weather, Vehicle Key. To apply those functions Access theAutel LinkAppDevicesTap the Connected OTOFIX WATCH. 9 Figure 2.6 Commonly Used Function 2.6 Do Not Disturb Mode After entering the Do Not Disturb mode, incoming calls and message reminders are forbidden, the alarm clock does not vibrate or ring, and the screen does not turn on when you raise your wrist. You can also set a regular Do Not Disturb time period, and the smart watch will enter theDo Not Disturbstate on time. To setDo Not Disturbmode Tap thepower buttonto light up the screen then swipe up to open the status bar and turn on
. To set the regular time ofDo Not Disturbmode Tap the power button to enter the application listTap Sound & vibrationDo Not DisturbTimer onAdjust the Do Not Disturb time. 2.7 Upgrade the Smart Watch System and App To upgrade the smart watch system Access theAutel LinkAppDevicesChoose the connected smart watchFirmware updateUpdate now. 10 To upgrade the Autel Link App Please update theAutel LinkApp in Android App Market or iOS App Store. NOTE You need to re-pair your phone and the smart watch after finishing the Autel Link App update. 2.8 Factory Reset To reset the smart watch Method 1: Tap the smart watchpower buttonto enter the application listTap Factory resetOK. Method 2: Access the Autel Link AppDevicesChoose the connected smart watchResetOK, tap OKagain when a pop-up appear on the smart watch. NOTE When chooseFactory reset, the stored data will be deleted. the original pke data will be deleted from smart If tickClear pke data, watch. 2.9 Charge the Device To charge the device Connect the power adapter to the power outlet, then connect the USB port of the charging base with the power adapter. Place the smart watch horizontally on the charging base. Align magnetic contacts on the charging base and that on smart watch. IMPORTANT Please use the attached charging base, and the charger with a rated output voltage of 5V and a rated output current over 1A to charge the smart watch. When the smart watch has a low battery, connect it to the power source, and an icon of charging will be displayed. The charging time is about 1 hour. Under different environmental conditions, the required charging time varies slightly. When finish the charging, please disconnect the charger in time . 11 The smart watch and the charging base and is not waterproof, please keep them dry before or in or after charging, or there are short circuits or other risks. The smart watch can be fully charged when the charging temperature is between 0 and 45 ;
It can not be fully charged when the charging temperature is between 45 and 60. In order to protect the battery life of the product, the charging current will be reduced in a cold and low temperature environment, and the charging time may be longer, but the battery life will not be affected. To check the battery power Method 1: Tap thepower buttonto light up the screen, then slide up to enter the status bar. And you can check the battery level of the smart watch. Method 2: Access theAutel LinkApp>Devices> Click the connected smart watch to view the battery power. 12 Basic Functions 3.1 Notification After the smart watch is successfully paired with the Autel Link App, the message reminder from the phone will be synced to the smart watch. Therefore, the smart watch will vibrate to remind you when there is a new message in the status bar of the phone. You can swipe the screen down to view the content of the message. Each message supports one screen display. You can click the news to read it. Please follow these steps to set up a message reminder. To set up a message reminder Access theAutel LinkAppDevicesTap the connected smart watchNotificationsTurn on the notifications switch, allow theAutel LinkApp to sync the information and choose the applications whose message you need to sync. NOTE The message reminder from phone application can be received by the smart watch. But you can not reply the message. If you set the Do Not Disturb mode or do not wear the smart watch, the smart watch will not receive notifications. If a new message comes while you are viewing the content of the message, the new message will automatically pop up to cover the content of the message currently being viewed. When the mobile phone and the smart watch are connected via Bluetooth, the mobile phone receives WeChat and QQ news, which will be transmitted to the smart watch via Bluetooth and has a delay. When the phone is connected to the smart watch and other Bluetooth devices at the same time, the smart watchs message or incoming call reminder still works. WeChat/QQ voice and picture messages reminders can be received on the smart watch, but the content can not be heard or read. Only the words of Voice message, Picturewill be displayed. To delete the news 13 Tap thepower buttonto light up the screenSwipe down the screen to check the news. Choose a piece of notification, you can swipe right to delete a single message, or click Delete Allat the bottom of the message list to clear all unread messages. 3.2 Make a Call After pair the smart watch and your phone successfully, there are three ways to make a call by smart watch. After setting the frequently used contacts in the Autel Link App on the mobile phone, the name and number of the contact will be synchronized to the call app of the smart watch, and then the smart watch call can be made. You can also directly enter the number to be dialed on the smart watch to make a call. Or dial the number in the record through the call record on the smart watch end. The specific steps are recorded below. To add/ delete frequent contacts Access theAutel LinkAppDevicesTap the connected smart watchContacts. TapAddSelect some contactsTap OKto add frequent Tap DeleteSelect some contactsTap OKto delete contacts. frequent contacts. To call by smart watch Tap thepower buttonto enter the application listTap Tap Contact personChoose one contact and make a call. Tap thepower buttonto enter the application listTap KeypadInput the phone number and make a call. Tap thepower buttonto enter the application listTap Call LogChoose the phone number and make a call. Tap Tap NOTE You can make a call only after the smart watch and your phone are paired successfully. Up to 10 frequently used contacts can be kept. 14 To make a call through the smart watch Contacts, the smart watch and the phone need to keep the normal connection. Up to 50 call records can be saved. In the Call Loginterface, swipe up to the bottom of the screen and click Clear Allto clear all existing call records. 3.3 Answer or Reject Calls When the smart watch and the phone are connected normally and there is an incoming call, the smart watch will vibrate to remind you and display the number or name of the caller. You can choose to answer or reject the call. NOTE The caller ID is the same as that on the mobile phone: when there is a incoming call, the contacts in mobile phone address book show the preserved ID of contact. the unknown caller ID displays the phone number;
If you set incoming call notifications or vibrate or brighten the screen to remind you. the Do Not Disturb mode, the smart watch will not receive When it is inconvenient to answer or you need to end the call, you can hang up through clicking the red button on the smart watch screen. When calling, the volume of the call can be adjusted. 3.4 Play the Music The smart watch can play the stored music. It can also play the music on the mobile phone after turning on the Control music in mobile phone through watch in the Autel Link App, which is only supported by Android phones. To store/ play/ delete the music in the smart watch Access theAutel LinkAppDevicesTap the connected smart watchMusicMusic ManagementAdd. Then the added music will be stored in the smart watch. Tap thepower buttonto enter the application listTap Tap to play the music. Swipe left to enter theLocal list. Select the music you want to delete, swipe right and tap Deleteto delete it from the playlist. 15 To add some songs to the playlist Access theAutel LinkAppDevicesTap the connected smart watchMusicMusic Managementcreate a playlist, input the playlist nameOK. Tap the playlistTap Add Music, choose some songs OK. NOTE In the smart watch play music interface, you can choose list loop (default), single loop, random play. If you need to use the smart watch to control mobile phone music, you need to clickMusicon theDevicesinterface page ofAutel LinkApp to open Control music in mobile phone through watch. 3.5 Stopwatch/ Timer To use stopwatch Tap thepower buttonto enter the application listTap Tap to time races. Tap Swipe the screen to the right to exit the stopwatch app. to pause. Tap to reset the stopwatch. When using the stopwatch, you can tap to record each time point, and the timing will continue. To use timer Tap thepower buttonto enter the application listTap The smart watch provides you with 8 countdown timers by default, 1/ 3/ 5/
10/ 15/ 30 minutes, 1 hour, 2 hours, etc. You can choose the appropriate timer according to different scenarios. Then start the timer. Tap to pause. Tap to exit countdown. At the same time, you can customize the timer. Click Customizeat the bottom of theTimerscreen to set your countdown time. Tap to start the countdown. Swipe the screen to the right to the timer interface then swipe right again to exit the timer application. 3.6 Set a Clock You can set a clock through smart watch or Autel Link App. To set a clock through smart watch 16 Tap thepower buttonto enter the application listTap add Alarm. Set the time OK Set the repetition period of the alarmOK Set theDelay TimeTapOKto finish the set. Tap the existing alarm clock to edit or delete it. By default, it is a one-time alarm when the repetition period of the alarm is not set. The alarm clock only supports the default ringtone of the smart watch. To set a clock through Autel Link App Access theAutel LinkAppDevicesTap the connected smart watchClockadd AlarmSet the time, clock label, repetition period of the alarmTapOKin the upper right corner. to Tap thepower buttonto enter the application list and tap check whether the alarm is set successfully. Tap the existing alarm clock to edit or delete it. NOTE NOTE The alarm clocks on the smart watch and the Autel Link App are synchronized, and up to 5 alarms can be set. When the alarm vibrates, tap the screen or the power button of the smart watch to delay the alarm. By default, the delay time is 10 minutes, you can also adjust it into 5/15/30 minutes. To turn off the alarm, tap the power button of the smart watch. When the alarm vibrates and there is no operation within 30 seconds, the alarm will be automatically closed after three times of automatic delay. 3.7 Use the Flashlight Tap thepower buttonto enter the application list and tap the flashlight. to turn on Then the screen will display bright light, you can slide left to change the color of the light. Touch the screen to turn off the flashlight. Touch the screen again to turn it on. Slide the screen right to exit the Flashlight application. 17 3.8 Use the Compass Tap thepower buttonto enter the application list and tap to turn on the compass. Rotate the smart watch as prompted by the smart watch to complete the calibration. After the calibration is completed, the smart watch can display the compass dial, which can help u to tell the direction. 3.9 Check the Weather Information The smart watch can display the weather information of your current location. You can check the weather on the smart watch in the following two ways. To synchronize the weather information of phone to the smart watch Access theAutel LinkAppDevicesTap the connected smart watchTapWeatherTurn on the weather switchChoose the temperature unit, then the real-time weather conditions in the phone will be synchronized to the smart watch. To check the weather information Method 1: Check through the smart watch, tap thepower buttonto enter the application listtap temperature, air quality and other information will be displayed. The location, weather status, Method 2: Check through standby screen, tap thepower buttonto TapDisplay & brightness enter the application listTap Tapreplace dialChoose a dial with weather information. 18 Basic Functions 4.1 Scientific Exercise The smart watch can record a variety of exercises, including walking, running, cycling, boating, climbing, rope skipping, yoga, boxing, dumbbells, etc. You can choose a favorable exercise according to different scenarios. In addition, you can also customize other types of exercise. To start the exercise the exercise. Tap thepower buttonto enter the application listTap to start Swipe up and down the screen to select different exercise types. Before exercising, you can set a exercise goal through tapping Then tap Finished. NOTE The exercise goal other standards. The measurement standard differ in different exercise. is mainly measured by calories, distance, duration or The smart watch need position itself. Then tap Start exercise.In the exercise interface, the exercise time, exercise distance, heart rate, calories, and other information will be displayed. These are differ in different types of exercise. Swipe the screen to the right during exercise, you will see: Lock, New training,End, Pause. When you tap Lock, the smart watch screen will be locked on the exercise display interface, and you can unlock it by long pressing the screen. After hearing the smart watch vibrate, the smart watch is unlock successfully. Choose New Trainingto start another new exercise, the current project will end. Click pause, the smart watch will stop recording. After you touch End, the ongoing sports will be ended. When not tapLock, click the smart watchpower buttonthe to exit the exercise interface. But the recording will not stop. After the exercise, you can click in the smart watch application list to view detailed exercise records. You can also click Exercise Records on the homepage of the Autel Link App, and click All Exercisesat the top of the Exercise Records interface to pick a certain exercise record you want to view, or select all records. NOTE 19 When the smart watch start to position itself, you can wait for the watch to complete positioning and click Start exercise , or directly tap Start exerciseto start exercising. After a single exercise is over, please choose to end the exercise to avoid increased power consumption. 4.2 Activity Record The smart watch will display the activity energy consumption, exercise time, and standing time. The smart watch records daily exercise data and summarizes it to form weekly exercise data, and analyzes the completion of weekly exercise goals. So that you can learn about your sports status or adjust your sports goals. Through the Activity Records in the application list, you can view diversified exercise status, weekly exercise data. To check the activity records Turn on the activity records: Tap thepower buttonto enter the application listTap
, swipe left the screen, tapStart to use . Check the activity records: Tap thepower buttonto enter the
, swipe left the screen to check the weekly application listTap exercise data. IMPORTANT To view exercise data through the Autel Link App, you need to keep your phone and the smart watch connected normally. 4.3 Track the Movement The smart watch supports an GPS. When you do some exercises, you can record your track movement during outdoor exercises such as outdoor running, outdoor walking, outdoor cycling, and mountain climbing. NOTE The movement track cannot be viewed on the smart watch. After the data is synchronized to theAutel LinkApp, detailed movement data such as the movement track can be viewed in the exercise record. 20 Health Management 5.1 Measure the Heart Rate The smart watch is designed with the heart rate sensing area, from which you can test your heart rate, to help you stay healthy in a scientific way. NOTE Once sleep status is detected, the smart watch will automatically switch to invisible light, try to avoid disturbing the user's sleep. 5.1.1 Measure the Heart Rate Continuously Intelligent monitoring Intelligently adjust the measurement frequency according to the exercise status, which helps to save power. To turn on the intelligent monitoring Tap thepower buttonto enter the application listTap HealthHeart rateTurn on the Continuous reading Choose Intelligent monitoring. Real-time monitoring When the smart watch is unlocked, it supports 24-hour continuous monitoring and recording of your heart rate, recording once a minute or five minutes. To turn on the real-time monitoring Tap thepower buttonto enter the application listTap Health Heart rateTurn on the Continuous reading Choose the Real-time monitoring. To check real-time heart rate data Tap thepower buttonto enter the application listTap The heart rate dynamics will be displayed in the heart rate chart, forming a curve, which is convenient for viewing the heart rate changes in a day. Slide down the screen to view the heart rate range. Swipe the smart watch screen to the right to return to the application
. list. 21 IMPORTANT In order to ensure the accuracy of heart rate measurement, please wear the smart watch normally, avoiding the joints, and try to wear it tightly during exercise, not too loose. Ensure that the heart rate monitoring area is close to the skin and not covered by foreign objects. Heart rate zone record During exercise, the smart watch can record the average, maximum and minimum heart rate of the current exercise, and the duration of the heart rate in each heart rate zone, based which exercise is conducive to a better training effects. When the training interval of the corresponding intensity is reached during exercise, it will be displayed in different color intervals on the smart watch. 5.1.2 Measure the Exercise Heart Rate When entering the exercise state, the smart watch will record the heart rate status. When you start exercising, swipe the smart watch screen and you can check the current heart rate. After finishing the exercise, you can see the average heart rate, heart rate range. To view heart rate during exercise Tap thepower buttonto enter the application listTap Swipe up and down the screen and select different exercise. Tap to set a exercise goal. When start to exercise, the smart watch will displays the current heart rate other data. To view heart rate after exercise Method 1: Tap the smart watchpower buttonto enter the Choose one exercise record and swipe application listTap down the screen to check the heart rate curve, average heart rate, etc. Method 2: Tap Autel LinkAppHomeExercise, choose one type of exercise record. Tap Chartsto view the heart rate graph, maximum heart rate and average heart rate value. 5.1.3 Measure the resting heart rate Resting heart rate refers to the heart rate value measured in a quiet, inactive, non-sleeping state, and can indicate the health of the heart. 22 The resting heart rate can only be checked in theAutel LinkApp. If the resting heart rate display is a horizontal line "- -", this is the scenario where the smart watch does not reach the resting heart rate. At this time, please make sure to measure your resting heart rate in a quiet, inactive, and non-sleeping state. 5.1.4 Heart rate notification When your heart rate exceeds the upper/lower heart rate limit you set and the duration exceeds 10 seconds/minutes, the smart watch will vibrate to remind you that your heart rate is too high/low. You can view and set the upper/ lower limit of your heart rate on your smart watch. Set the heart rate notification Tap thepower buttonto enter the application listTap HealthHeart rateHeart rate notifications Choose a value inHigh heart rate, tap OK Set the value inLow heart rate, tap OK. NOTE When the heart rate is lower or higher than the set value, the device will vibrate, pop-up prompt, and run voice alarm. The default upper heart rate is 165 times/min, and you can adjust it to some values between 100 and 220 times/min.The default the smart watch is 50 lower heart rate value of times/min, you can also adjust to 45 times/min, 40 times/min. Turn off the heart rate notification: Tap the power button to enter the application list Tap Health Heart rate Heart rate notifications High heart rate/Low heart rateTurn off. During exerciseWhen the heart rate is below a set minimum or above a set maximum and lasts for more than 10 seconds, the smart watch will remind you. Non-exercise statusWhen the heart rate is below a set minimum or above a set maximum and lasts for more than 10 minutes, the smart watch will remind you. 23 5.2 Sleep monitoring Wearing the smart watch to fall asleep, the smart watch will automatically recognize the moment when you enter sleep, exit sleep, sleep deeply, and sleep lightly. It can be synchronized to theAutel LinkApp to view your sleep details. The smart watch record the sleep cycle from 2200 pm to 800 am on the next day, a total of 10 hours. The sleep data of the day can be displayed on the smart watch. Tap the power button of the smart watch to enter the application list, tap
, and swipe up the screen to view the sleep duration at night. You can view historical sleep data in theAutel Link App. Please click on theSleepon the homepage of theAutel LinkApp, and the historical data will be displayed, with statistics on a daily, weekly, and monthly basis. IMPORTANT The smart watch will not record sleep time from 8:00 am to 22:00 pm. The smart watch will not show the sleeping status if your sleep time is too short and less than 60 minutes at the beginning. Its not until you are detected to sleep over 60 minutes that the smart watch start to produce the sleep data every 30 minutes. If you wake up suddenly and do some exercises, the smart watch will stop the recording. It starts the second sleep recording when you reach more than 30 minutes sleeping time. If your body or wrist moves a lot during sleep, the smart watch may not be able to detect it, and sleep data will not be recorded at this time. The smart watch will automatically recognize the state of entering sleep and exiting sleep, and can accurately analyze awake, light sleep, deep sleep to help you understand sleep scientifically and improve sleep quality. The clock alarm, incoming call, reminder of heart rate and exercise still work normally when the smart watch detects that you are sleeping. The notification from your phone or missed calls will be showed in the information center, without ringtone or vibration. Other information will not be reminded. The smart watch will vibrate to remind you of sleeping 15 minutes before the sleep reminder time you set. You can tap thepower buttonto enter 24 the application listTap reminderswitch> Set the sleep reminder time> OK.
> Health> Sleep> Turn on Sleep 5.3 Breath Training Breathing training can help you relax in the stressful work or life and soothe your mood. To start the breath training Tap thepower buttonto enter the application listTap Please wear your smart watch and keep your arms still, tapStart,
. then exhale and inhale according to the on-screen instructions. NOTE After changes. The training time is 1 minute by default. There is a vibration reminder during the inhalation process, and the vibration changes from fast to slow. training, the screen displays your training effect and heart rate You can also manually set the number of breaths per minute: Tap the Health power button to enter the application list Tap BreatheChooseNumber of breathsOK To set the reminder of the breath training You can also set a reminder for breathing training. The smart watch will vibrate to remind you of breathing training according to the number of times you choose. Tap thepower buttonto enter the application list Tap HealthBreatheReminder countChoose the reminder countOK. 5.4 Blood oxygen saturation test The smart watch supports manual detection of blood oxygen and data storage in order to monitor the metabolic state of tissue cells and monitor the health status. To measure the blood oxygen saturation Tap thepower buttonto enter the application list Tap Startto measure your current blood oxygen saturation. Tap 25 NOTE the measurement, please wear For the accuracy of the smart watch normally and avoid the joints. Ensure that the heart rate sensing area is close to the skin and not covered by foreign objects, not wearing loosely. Keep your body still. The test range of blood oxygen measurement is 70%~100%. The duration of a single blood oxygen measurement is about 30 seconds. While measuring blood oxygen saturation, the smart watch will measure a single heart rate value. The measurement will be interrupted when swiping the smart watch screen to the right, when there is an incoming call/alarm reminder on the smart watch. Manually measured data can be viewed through theAutel LinkApp. The data will be presented in phone every 30 minute. 5.5 Stand reminder TheStand reminderfunction will detect your activity status within the set time, 60 minutes one time by default. If you have been sitting in the period, the smart watch will vibrate and brighten the screen to remind you that you should stand up and move your body to ensure your full rest and good health. The mobile phone defaults to turn on the Stand reminder function, if you do not want to be disturbed, you can set it off. To turn off stand reminder Tap thepower buttonto enter the application listTap HealthStand reminder NOTE If you turn on theDo Not Disturbmode, the smart watch will not vibrate to remind you. When you are asleep, the smart watch will not vibrate to remind you in case of disturbing your rest. 26 Every day from 800 to 2200, when you keep sedentary for over 1 hour, the smart watch will vibrate and pop up a stand reminder. 27
1 2 | FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 61.30 KiB | February 14 2022 |
Autel Intelligent Technology Corp., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: WQ8-SW2101 Date: 2022-01-25 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: Frank Li Title: President
1 2 | Letter of Authourization | Cover Letter(s) | 61.25 KiB | February 14 2022 |
Autel Intelligent Technology Corp., Ltd. Letter of Authorization Company: Autel Intelligent Technology Corp., Ltd. Address: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd., Xili, Nanshan Shenzhen China Product Name: Smart Watch Model Number(s): SW2101 Product Description: Smart Watch We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Name:
Frank Li Title:
President Company: Autel Intelligent Technology Corp., Ltd. Date: 2022-01-25
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-02-14 | 434 ~ 434 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-02-14
|
||||
1 2 | Applicant's complete, legal business name |
Autel Intelligent Tech. Corp., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0018132787
|
||||
1 2 | Physical Address |
7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan
|
||||
1 2 |
7th-8th, 10th Floor, Bldg. B1, Zhiyuan
|
|||||
1 2 |
Shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
WQ8
|
||||
1 2 | Equipment Product Code |
SW2101
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
F**** L********
|
||||
1 2 | Title |
President
|
||||
1 2 | Telephone Number |
(86)7********
|
||||
1 2 | Fax Number |
(86)7********
|
||||
1 2 |
s******@autel.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Autel Intelligent Technology Corp., Ltd.
|
||||
1 2 | Physical Address |
China
|
||||
1 2 |
s******@autel.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Watch | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted power. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Anbotek Compliance Laboratory Limited
|
||||
1 2 | Name |
J****** Z******
|
||||
1 2 | Telephone Number |
86-75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
j******@anbotek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | CC | 315 | 315 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15.231 | CC | 434 | 434 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0011000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC