(@ntinental 4 Chassis & Safety ADC GmbH ~ Peter-Domier-Strasse 10 - 88131 Lindau To the BU ADAS Federal Communications Commission (FCC) Manager sist i aviesrieg Phone +49 8382 9699-435 Fax +49 8382 969922-435 frank.gruson@continental-corporation.com 2014-09-23 Certification for Continental SRR3-A Model/FCC ID: OAYSRR3A IC: 4135A-SRR3A The device under test is manufactured by the grantee (ADC Automotive Distance Control Systems GmbH) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc..., the grantee must ensure that the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as is the case with this product, the grantee must notify the OEM to notify the end-user. ADC Automotive Distance Control Systems GmbH will supply the following information to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs
(in blue) below must be included in the user's manual. 1/2 ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Strasse 10 | 88131Lindau | Germany Phone +49 8382 9699-0 | Fax +49 8382 9699-548 | www. continental-corporation com Managing Directors: Kariheinz Haupt, Uwe Grau Registered Office: Lindau | Registered Court: Kempten | HRB No. 6408 | VAT ID No DE812185464 | Tax No. 127 121 20175 Bank Account: Deutsche Bank | Ravensburg | BIC / SWIFT Code: DEUTDESS650 | NBIC: 650 700 84 | Account No.: 34 000 82 00 |
IBAN Code DE9O 6507 0084 0340 0082 00
@ntinentals:
For USA & CANADA FCC ID : OAYSRR3A IC: 4135A-SRR3A This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiofrequency radiation exposure Information:
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 30 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 30 cm de distance entre la source de rayonnement et votre corps. FCC Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Sincefely,
Uwe Grau r erweinen Head of Controlling rector Human Resources