CBS Base Station hardware security Loading Manuals Appearance Installation Device Shipment This appliance contains CBS Base Station X1 , USB Power Dongle X1 , USB Power Cords X1 , Fixed base X1 ( the base is combined with the base station in advance when shipment is shipped ) . Separating the device from the fixed base before installing, please separate the base station from the fixed base counter clock. Each CBS has a separate code number that is located in the body's back shell. Mounting a fixed base In accordance with the plan, select the appropriate location, the fixed base card tenon outward, locked in the ceiling or metope. ( base groove design, providing line space using a harness band) or Install base Station the back groove of base station is aligned with the base card mortise and fixed with the rotation of the clock. connect the USB Power cord and the system will start itself after the power supply. installation, in accordance with the plan, according to the machine code and the corresponding location of the installation, or copy the corresponding code points to provide to the set personnel. Start Base Station When the power supply is plugged in, the power LED will start flashing green light. Connect the wireless network with the blue Bud, will sound two prompts, the LED display even The line status. Long press the top button on the Panel 1 seconds to turn off the indicator light and sound, but the appliance remains in operation. Attention:
If the power LED is not blinking after powering on, keep it on or off, make sure it is powered correctly and reseated USB power cord. Wireless Wi-Fi the light number is not lit, please confirm Wi-Fi whether the signal is covered to the location of the department. If you are connected to the Internet correctly, you will see the light on and hear the Beep and beep. Warning Warning:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.