AVerMic AW315 Wireless Teacher Microphone Quick Guide English BATTYMIC IN Disclaimer All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. Copyright and Trademark Information 2019 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia. For more information, please visit www.avermedia.com. AVerMedia is trademark or registered trademark of AVerMedia Technologies, Inc. Headquarters Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Website www.avermedia.com Support www.avermedia.com/support Telephone +886-2-2226-3630 US Office Address Website www.avermedia-usa.com Telephone +1 (510) 403 0006 4038 Clipper Ct., Fremont, CA 94538, United States Head Office EU (AVT Solutions GmbH) Address Hanauer Landstrasse 291 B, 60314 Frankfurt Hessen, Germany Website http://q.avermedia.com/edu-inquiry 23585 135 www.avermedia.com http://q.avermedia.com/edu-support
+886-2-2226-3630 Important Safety Instructions Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. Do not use the apparatus on uneven or unstable surfaces. Do not use this apparatus in a wet environment or near water. Unplug the apparatus before cleaning. Clean only with a dry cloth. Use in a well ventilated environment. Do not block any ventilation openings. Use the apparatus within ambient temperatures 32104F (040C). 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Use power sources within the specified voltage range. 11. Do not place heavy objects on the apparatus. 12. Do not install near heat sources such as radiators or stoves. 13. Do not defeat the safety purposes of the polarized or grounding-type plug. 14. Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters. 15. Only use the attachments and accessories specified by the manufacturer. 16. Unplug this apparatus during lightning or when unused for prolonged periods of time. 17. Do not modify or disassemble the apparatus in any way. 18. Refer all servicing to AVerMedia Customer Service. 19. Do not dispose the apparatus as general household waste. Dispose in accordance with local environmental laws. 1. 2. 3. 4. 5. 6. 7. 8. 9. 32104F (040C) 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Inside the Box These are what you'll find in the box*:
Smart Microphone
(AW315T) Receiver
(AW315R) Microphone Charging Dock Quick Guide USB AC Adapter
& Detachable Plug USB Power Cable 3.5 to 6.3 mm Audio Cable 3.5 mm Audio Cable Buckle Lanyard Headset Microphone
* Please refer to the package label for your actual contents as they vary depending on different SKU variants. For details on purchasing accessories, visit our product webpage. 4 Parts and Ports EN Microphone 2 1 BATTY MIC IN 3 4 5 6 7 Charging Dock 1 Microphone 2 Lanyard Hole 3 Battery LED 4 USB Power Port 5 Mic Input 6 Clip 7 Charging Dock Connector 8 Power LED 9 Power Button 10 Volume Up Button 11 Volume Down Button 8 9 10 11 14 13 14 12 P O W ER 15 12 USB Power Input 13 LED Indicators 14 Charging sockets 15 Mounting Keyholes 5 Parts and Ports Receiver 1 2 3 4 5 6 7 8 9 1 Antenna 2 Mic 1 LED Indicator 3 Power Button/LED
(Press and hold 5 sec to switch between Power Saving Mode*
and Normal Mode**) 4 Mic 2 LED Indicator 5 USB Power Port 6 Audio Input 7 Audio Output 8 Line/Mic Audio Out 9 Mounting Keyholes Switch
* Power Saving Mode:
Receiver automatically turns off after 30 minutes without receiving any microphone signal.
** Normal Mode is set as default: Receiver stays on once turned on. Receiver Mic LED Flashing Green: Pairing Solid Green: Paired Receiver Power LED Solid Blue: Powered On
(Switching Mode) Flash 3x --> Solid Blue:
Power Saving Mode
(Switching Mode) Solid Blue: Normal Mode Flashing Blue: Firmware Updating 6 Installation 1 EN 4POWER VOL 3 2 OR MIC IN Note: (i) To avoid excessive sound on initial sound test, lower your speaker system volume first. (ii) Fully charge your microphone before first use. 1. Connect the receiver to a power outlet. 2. Connect the receiver Audio Output to a Mic Input on a speaker system or to a Line Input on a standalone speaker. 3. Turn the Audio Out Switch to Line or Mic accordingly. 4. Turn on the microphone and start using.*
* After being turned on, if the microphone and receiver do not work and their Power LEDs flash slowly, turn the microphone off and turn it back on. The microphone will automatically search for the receiver and start to pair. The pairing is complete when the Power LEDs turn solid green. 7 Charging 1 2 3 1. Connect the charging dock to a power outlet. 2. Insert Smart Microphone into a socket to start charging. 3. The charging is complete when the orange LED indicator turns off. Charging Dock LED Solid Orange: Charging Off: Fully Charged You can also plug in the USB Power Cable to charge your microphone. Mic Battery LED (BATTY) Flashing Red: Critical Solid Orange: Low Flashing Red > Orange > Green:
Charging
(Charging) Solid Green: Fully Charged 8 Preparation Thread the lanyard through the buckle. Then attach the buckle to the microphone. EN Lanyard Buckle Wearing You can clip the microphone to your clothing or wear it with the lanyard. The microphone is most effective when worn within 6 inches (15 cm) from your mouth. 6 in
(15 cm) 9 Dual-Mic & Compatibility AW313 and AW315 are compatible with some conditions. The chart below shows their microphones and receivers compatibility. Mic Pairing Order AW315 Receiver AW313 Receiver 1st Mic 2nd Mic AW315T AW315T AW313T AW315T AW315T AW313T AW313T AW313T 1st Mic 2nd Mic X X 1st Mic 2nd Mic X X X X Firmware Updates & More You can easily update firmware by connecting the receivers USB port to a computer. For details, go to this link: http://q.avermedia.com/aw315. In addition, all future updates and new features will be listed on this webpage. Alternatively, scan the QR code below for mobile access. 10
*
TC
(AW315T)
(AW310R) USB
&
USB 3.5 6.3 mm 3.5 mm
* SKU 11 2 1 BATTY MIC IN 3 4 5 6 7 1 2 3 4 USB 5 6 7 8 9 10 11 8 9 10 11 14 13 14 12 P O W ER 15 12 USB 13 LED 14 15 12 1 2 3 4 5 6 7 8 9 1 2 1 TC 3 /
5 *
**
4 2 5 USB 6 7 8 Line/Mic 9
* :
30
**
:
:
:
() --> :
() :
:
13 1 4POWER VOL MIC IN 3 2 OR
:
(i)
(ii) 1. 2. Line 3. Line Mic 4. *
*
14 1 2 TC 3 1. 2. 3.
:
USB
(BATTY)
:
:
> > :
() :
15 15 (6 ) 15 cm
(6 in) 16
&
AW313 AW315 TC AW315 AW313 AW315T AW315T AW313T AW315T AW315T AW313T AW313T AW313T X X X X X X
&
USB http://q.avermedia.com/aw315 QR 17 Federal Communications Commission Statement Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. CAUTION ON MODIFICATIONS To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in computer equipment certified to comply with the Class B limits. All cables used to connect the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-
shielded cables may result in interference to radio or television reception. Changes and modifications not expressly approved by the manufacturer or registrant of the equipment can void your authority to operate the equipment under Federal Communications Commission rules. Radiation Exposure Statement (For: AW315R) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Radiation Exposure Statement (For :AW315T) This equipment complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. European Community Compliance Statement Class B This product is herewith confirmed to comply with the requirements set out in the Council Directives on the approximation of the laws of the Member States relating to R&TTE Directive 1999/5/EC, Low Voltage Directive
(LVD) 2014/35/EU. Waste Electrical and Electronic Equipment Directive T The mark of crossed-out wheeled bin indicates that this product must not be disposed of with your other household waste. Instead, you need to dispose of the waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where to drop off your waste equipment for recycling, please contact your household waste disposal service or the shop where you purchased the product. NCC Regulatory Compliance Mark Technical Regulations of the Customs Union TR CU 020/2011 TR CU 004/2011 FAC sticker here 300AAW315EBB Model No.: AW315 Smart Microphone/
Made in Taiwan/
www.avermedia.com