FCC ID: GU6-GL2120TH Thermal Printer

The Smart Way to Manage Your Restaurant Operations Thermal Printer GoLabel is a wireless label printer designed to work with a tablet running GoOps or SubOps. GoLabel simplies your food prepping and labeling procedures. This Quick Start Guide will help you familiarize yourself with GoLabel before you get started. SKIP THE GUIDE AND WATCH OUR QUICK START VIDEO!

Watch our Quick Start video by scanning the QR code or visiting www.zippyyum.com/golabelsetup

(888) 636-7557 support@zippyyum.com www.zippyyum.com SETUP 1 Open GoLabels cover and remove any packaging material and the labels from inside. If the rst label has tape on it, remove the tape. 2 Place the roll of labels directly into the printer so the labels feed from the top. 3 Push the roll of labels to the left so the left side of the roll is ush with the left side of the printer. 4 Feed the rst label through the label feed guides, making sure the labels are aligned on the left side of the printer. No gap Aligned with left side SETUP 5 If the label is loose in the feed guides, ensure the label feed guides are adjusted to the width of the label by moving the right guide, keeping the left edge of the labels aligned with the left side of the printer. 6 Feed the rst label through so it is slightly sticking out of the printer. Then close, plug in, and turn on your GoLabel. 7 Download and install the GoOps or SubOps app on a compatible tablet. 8 Enter your credentials, log into the app, and follow the on-screen Quick Start Guide to pair your GoLabel and set up the app. If youve registered, sign in using your credentials Restaurant#

Password Sign In GETTING TO KNOW YOUR GOLABEL HARDWARE 5 4 2 3 1 2 3 4 5 6 7 8 9 Cover Release Button Connection Indicator Error Indicator Pause Button Feed Button Power Button Label Roll Bucket Left Feed Guide Right Feed Guide 1 7 8 9 6 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 1 ISED Statement:

English: This device complies with Industry Canada licenseexempt RSS standard

(s).Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES3 (B)/NMB3(B). French: Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi olectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numrique du ciem conforme canadien peut 3 (b) / nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. 1 Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. HVIN:GL2120TH PRINTING LABELS The number on the printer shows how many labels will be printed. After printing a label(s), the number will turn grey and reset to 1. PRODUCTS QUANTITY CONTAINERS HOW-TO PRINT LABEL Prepping & Printing Labels John Smith Count Done Protein Cheese Pepper Jck Slcd Cheese Swiss Nat Sl 32 Chs American White Trngl 400S Chs Jck/Ched Shred Chs Provolone Slc Egg Patty Ylw 1 5 oz Fz Egg Whi Patty 1 5 oz Fz Toppings Glaze Teryaki 2 2 1 1 2 6 6 Pack (1 lb) Pack (1 lb) Pack (5 lbs) Bag (2 lbs) Pack (1 lb) Pack (1 ct) Pack (1 ct) 1 1 2 2 1 1 1 1/6 container 1/6 container 1/6 container 1/6 container 1/6 container 1/3 container 1/3 container N/A N/A Mayo Light 1 Pouch (52 oz) 8 Bottles 1 1 2 2 2 1 1 1 Changing the number in the containers or quantity box will make the icon green again, indicating the new number of labels to print. This icon indicates the item does not need a printed label. Just tap to mark it as completed.

IC: 1502A-GL2120TH FCC:GU6-GL2120TH Label and Location Thermal Printer Model No.: GL2120TH IC: 1502A-GL2120TH FCC:GU6-GL2120TH This device complies with Part 15 of the FCC Rules with Industry Canada licence-exempt RSS standard(s). Operation issubject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Size: L: 4.0cm*W: 3.0cm Label and Location

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-10-19>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID GU6-GL2120TH Model name GL2120TH For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Michael Ouziel/Regulatory Engineer Company:

Address:

Phone:

Fax:

E-Mail:

Avery Dennison Retail Information Services, LLC 170 Monarch Lane Miamisburg Ohio 45342 United States 937-865-2157 937-865-2048 michael.ouziel@averydennison.com

Avery Dennison Retail Information Services, LLC 170 Monarch Lane Miamisburg Ohio 45342 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2021-10-19 We, Avery Dennison Retail Information Services, LLC the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: GU6-GL2120TH including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Michael Ouziel/Regulatory Engineer Company:

Address:

Phone:

Fax:

E-Mail:

Avery Dennison Retail Information Services, LLC 170 Monarch Lane Miamisburg Ohio 45342 United States 937-865-2157 937-865-2048 michael.ouziel@averydennison.com