Product Specification Product:
Module Number:
Doc Version:
Customer:
Date:
Bluetooth 4.1 Module AVI1010-B V1.0 04.08, 2018 Office Add.: Room 1302, Block A, Building 4, Tianan Cyber Park, Huangge Road, Tel: 0755-82079390/82079392 Longgang District, Shenzhen, Guangdong, China Fax: 86-755-82079390-8007 1 Content Section 1: Overview .......................................................................................................................... 3 1.1 Detailed Specifications .................................................................................................... 3 1.2 Applications ..................................................................................................................... 3 1.3 Features ............................................................................................................................ 4 1.4 Functional Block Diagram ............................................................................................... 5 1.5 Physical Description ........................................................................................................ 6 Section 2: Supporting Documentations ............................................................................................. 7 2.1 Reference Schematic ........................................................................................................ 7 2.2 Layout Considerations ..................................................................................................... 7 2.3 Recommended Operating Conditions .............................................................................. 7 2.4 RF Specification ............................................................................................................... 8 Section 3: Application Diagram ........................................................................................................ 8 Section 4: Mechanical Specification ................................................................................................. 9 Section 5: Information for Manufacture ......................................................................................... 10 Section 6: Packaging Specifications ............................................................................................... 11 Section 7: FCC Statement ............................................................................................................... 13 Section 8: Canada Statement .......................................................................................................... 15 2 AVI1010-B Bluetooth 4.1 Module Section 1: Overview The AVI1010-B module is an RF module built on the CSR1010 chipset, which provides a single-chip solution to controlling all types of lighting and other devices, whether line-connected or battery-powered.Controlling host and radio interfaces, the on-chip microcontroller runs both the Bluetooth Stack and the Bluetooth Mesh Application Stack. The on-chip RF transceiver includes the complete receiver and transmitter functions and support external antenna. 1.1 Detailed Specifications Item Characteristic Detailed Description 1 RF Technology 2 RF Frequency 3 Modulation Type 4 Operating Frequency Frequency Hopping Spread Spectrum 2402 to 2480 MHz GFSK 2402 ~ 2480 MHz ISM band 5 Channel Numbers 6 Data Rate 7 Transmitter Output Power 8 Receiver Sensitivity 40 (f = 2402 + k*2 MHz, k=0,1, 2 39) 1 Mbps (Typically) 11dBm typ(Direct measurement)
-90 dBm Typical 9 Antenna Type internal antenna(antenna with a IPEX connector or antenna can be welded to the module) and external antenna 10 Operating Voltage(VBAT) 11 Current Consumption 1.8V3.6VDC 18 mA@3.3V active mode 35 mA@1.8V active Mode Max. <5uA@3V Sleep mode (estimated) 12 Size 13 Operating Temp 18mm12mm2.5.mm(LxWxH)
-30C to +85C 1.2 Applications Lighting control Alarm sensors Window and door locks Temperature and smoke monitoring. Remote controls Other of Smart home 3 AVI1010-B Bluetooth 4.1 Module 1.3 Features The AVI1010-B module offers the following features:
Bluetooth v4.1 specification compliant Bluetooth Smart Security: 128bit UUID and 128bit AES encryption Support for 4 PWM channels of 100Hz to 4 kHz Each group can have 65,536 units and users can create up to 65,536 groups Can be added to the network by scanning QR code Built in UART, I2C, SPI, ADC, PWM dimming interfaces Internal EEPROM memory provides storage for the Bluetooth software parameter and application parameter PCB Size: 18mm*12mm*0.8mm Electrical:
o DC Supply: 1.8V ~3.6V o Low current consumption: 24 mA @3V (Peak Current) ROHS compliant BQB certification 4 1.4 Functional Block Diagram AVI1010-B Bluetooth 4.1 Module Figure 1: Functional Block Diagram 5 1.5 Physical Description AVI1010-B Bluetooth 4.1 Module Pins Name Function Description 1 2 3 4 5 6 7 8 9 WAKE I If not used, tie to GND XTAL_32K_IN Analog in 32.768KHz installed XTAL_32K_OUT Analog in 32.768KHz installed I2C_SCL I/O SPI serial flash installed, or I2C clock Input/output. VBATT Power Power input I2C_SDA SPI_PION PIO[11]
PIO[10]
10 PIO[9]
I/O I I/O I/O I/O SPI serial flash installed, or I2C data Input/output. SPI serial flash installed, or I2C clock Input/output. Programmable I/O Programmable I/O Programmable I/O 11 SPI_MISO/PIO[8] I/O SPI data output or Programmable I/O 12 SPI_MOSI/PIO[7] I/O SPI data input or Programmable I/O 13 SPI_CSB/PIO[6] I/O SPI select or Programmable I/O 14 SPI_CLK/PIO[5] I/O SPI clock or Programmable I/O 15 PIO[4]
I/O Programmable I/O 16 VDD_PADS Power Positive supply for all digital I/O ports 17 PIO[3]
I/O Programmable I/O 18 UART0_RX/PIO[2] I/O UART RX or Programmable I/O 19 UART0_TX/PIO[1] I/O UART TX or Programmable I/O 20 AIO[0]
21 AIO[1]
22 AIO[2]
I/O I/O I/O Analogue Programmable I/O Analogue Programmable I/O Analogue Programmable I/O 23 GND 24 GND 25 GND 26 GND 27 RF 28 GND Ground Ground Ground Ground Ground Ground Ground Ground Antenna External Antenna Ground Ground 6 Section 2: Supporting Documentations AVI1010-B Bluetooth 4.1 Module 2.1 Reference Schematic The most recent schematic , bill of material ,and layout file are available from the I TON Technology Corp. Contact your ITON representative for more details. 2.2 Layout Considerations The AVI1010 module is located where the antenna is away from the power supply and any digital signal traces.The antenna keep-out area which is 5mm around the parameter of the module region. PCB material and signal traces should not be placed within the antenna keep-out area to assure optimum antenna performance. 2.3 Recommended Operating Conditions Operating Condition Symbol Value Unit Dc supply voltage I/O supply voltage (VDD_PADS) Operating temperature range Storage temperature range VBAT 1.8(Min)--3.6(Max) VI/O Topr Tstg 1.2 to 3.6
-30 to +85
-40 to +85 V V Figure 2:Recommended Operating Conditions 7 AVI1010-B Bluetooth 4.1 Module 2.4 RF Specification then,the AVI1010VIA -B RF Spec base on CSR1010 DataSheet AVI1010-B Module contains an integrated balun which provides a single-ended RF TX / RX IPEX connector. The transmitter has been optimised to deliver power in to a 50 load. And Bluetooth Transmitter 9dBm RF transmit power with level control from integrated 6-bit DAC over a dynamic range >25dB No external power amplifier or TX/RX switch required Bluetooth Receiver
-90dBm sensitivity Integrated channel filters Digital demodulator for improved sensitivity and cochannel rejection Fast AGC for enhanced dynamic range Section 3: Application Diagram 8 AVI1010-B Bluetooth 4.1 Module Section 4: Mechanical Specification Relative coordinate as below and Unit:mm 9 Section 5: Information for Manufacture AVI1010-B Bluetooth 4.1 Module 10 AVI1010-B Bluetooth 4.1 Module Section 6: Packaging Specifications For tape and reel packing and labelling see IC Packing and Labelling Specification . 6.1 Tape Orientation Figure 6.1 shows the AVI1010-B module packing tape orientation. Figure 6.1 :Tape Orientation 6.2 Tape Dimensions Figure 6.1 shows the dimensions of the tape for the AVI1010-B Module . Figure 6.2: Tape Dimensions 11 6.3 Reel Information AVI1010-B Bluetooth 4.1 Module Figure 6.3: Reel Information 12 AVI1010-B Bluetooth 4.1 Module Section 7: FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations 13 or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. AVI1010-B Bluetooth 4.1 Module End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AFZI-
AVI1010B. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Antenna Information The AVI1010-B have designed to pass certification with antenna listed below; the required antenna impedance is 50 ohms. Module Model Antenna Model Antenna Type AVI1010-B 6007ANT Antenna Connector PIFA Antenna Weld on board Peak Gain(dBi) 2400~2483.5MHz 1.42dBi 14 Section 8: Canada Statement AVI1010-B Bluetooth 4.1 Module This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitationestautorise aux deux conditions suivantes:
- lappareil ne doit pas produire de brouillage;
- lutilisateur de lappareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible dencompromettre le fonctionnement. This radio transmitter (IC: 20544-AVI1010B) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsentmetteur radio (IC: 20544-AVI1010B) atapprouv par Industrie Canada pour fonctionner avec les types d'antennenumrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclusdanscetteliste, etdont le gain estsuprieur au gain maximal indiqu, sontstrictementinterdits pour l'exploitation de l'metteur. Module Model Antenna Model Antenna Type AVI1010-B 6007ANT Antenna Connector PIFA Antenna Weld on board Peak Gain(dBi) 2400~2483.5MHz 1.42dBi Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclarationd'exposition aux radiations Cetquipementestconforme Canada radiations dans un limitesd'exposition aux environnement non contrl. Cetquipementdoittreinstall et utilis distance minimum de 20cm entre le radiateur et votre corps. This device is intended only for OEM integrators under the following condition:
15 AVI1010-B Bluetooth 4.1 Module The transmitter module may not be co-located with any other transmitter or antenna. As long as the condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cetappareilestconuuniquement pour les intgrateurs OEM dans les conditions suivantes:
Le module metteurpeut ne pas trecoplant avec unautremetteurouantenne. Tant que les 1 condition ci-dessussontremplies, des essaissupplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM esttoujoursresponsable des essais sur son produit final pour toutesexigences de conformitsupplmentairesrequis pour ce module install. Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. Note Importante:
Dans le casoces conditions ne peuventtresatisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autremetteur), l'autorisation du Canada n'est plus considrcommevalide et l'ID IC ne peut pas treutilis sur le produit final. Danscescirconstances, l'intgrateur OEM sera charg de rvaluer le produit final (y comprisl'metteur) etl'obtentiond'uneautorisationdistincte au Canada. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC:20544-AVI1010B. Plaque signaltique du produit final Le produit final doittretiquetdans un endroit visible avec l'inscriptionsuivante: Contient des IC: 20544-AVI1010B. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding 16 AVI1010-B Bluetooth 4.1 Module how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doittreconscient de ne pas fournir des informations l'utilisateur final quant la fand'installerou de supprimerce module RF dans le manuel de l'utilisateur du produit final qui intgrece module. Le manuel de l'utilisateur final doitincluretoutes les informationsrglementairesrequises et avertissementscommeindiqudanscemanuel. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna. Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and 17 obtaining a separate FCC authorization. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if the test result comply with FCC part 15.247 and 15.209 requirement, then the host can be sold legally. AVI1010-B Bluetooth 4.1 Module End Product Labeling If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AFZI-AVI1010B. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. The modular is not intended to be fielded serviceable as without shielding, host manufacturer must be considered shielding when integrating a module. When the module is installed inside another device, the user manual of this device must contain below warning statements;
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. ISED Statement English: This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interferenc e, and (2) This device must accept any interference, including interference that may cause un desired operation of the device. French:
Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes: (1) l'appa reil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouilla geradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnem ent. Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. This device is intended only for OEM integrators under the following condition:
The transmitter module may not be co-located with any other transmitter or antenna. As long as the condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
18 Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. AVI1010-B Bluetooth 4.1 Module Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the ISED cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to RSS-247 and RSS-
Gen requirement, only if the test result comply with RSS-247 and RSS-Gen requirement, then the host can be sold legally. Note Importante:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l' ISED ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. toute entreprise de l'hte qui installent ce dispositif modulaire avec limite approbation devrait effectuer l'essai des modules et des rayonnements non essentiels des missions rayonnes selon rss-247 et le cnr - gen, seulement si le rsultat d'essai conforme rss-247 et le cnr - gen, puis l'hte peut tre vendu lgalement. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC: 20544-
AVI1010B. Plaque signaltique du produit final Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: Contient des IC: 20544-AVI1010B. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. 19