FCC ID: PH7MV140 Cellular/ PCS CDMA Modem

1 INTRODUCTION The Axesstel MV100 Series Wireless Broadband USB Modems leverage CDMA2000 1xEV-DO Rev A networks to allow mobile professionals to maintain productivity with secure, high speed access to email, the Internet, data intensive files and multi-media streaming. Voice calling and SMS messaging enable users to stay connected to colleagues, customers and family. A universal USB port allows for quick and easy connectivity to a desktop or laptop PC providing broadband data access from the home, office or while working remotely. Backward compatibility ensures coverage in CDMA2000 1xEV-DO Rev 0 and CDMA2000 1X coverage areas, while internal receive diversity antennas maximize coverage range and data throughput. The slim and compact MV100 Series Wireless Broadband USB Modems provide busy professionals with the versatility to stay productive and connected virtually anywhere, anytime from the home, office or while traveling. FEATURES 1. PC-Based Connection Manager Software with PIM Functionality and MS Outlook Phonebook Sync 2. Two Line Color LCD with Status Indicators 3. Receive Diversity for Maximum Range and Throughput 4. Voice and Text Messaging through CDMA2000 1X 5. RUIM Support Optional 6. Internal Li-Ion Battery for additional Transmission Power 7. Phone Book 8. Short Message Service 2 SAFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don't Shake, hit or drop the modem. 3. To clean the outside of the modem, use only a soft, dry cloth. The chemicals in alcohol, benzene or acetone can damage the surface of the modem. 4. Do not twist or pull the Mini-B USB Cable. 5. Do not disassemble the modem. 6. Do NOT use the power adaptor if:

- The power cord is damaged.

- The phone has been dropped or damaged in any way. 7. Frequency and length of use can affect the life of the self-charging battery. Contact your customer service if the battery is not operating properly. 8. Use only the designated self-charging battery. Dispose of exhausted batteries properly. Never discard a battery in or near fire or flame. 9. Do not place the modem near water, for example, near a bathtub, sink, wet basement, or swimming pool. NOTE 1: The input and output voltages are indicated on the adapter.

(Input: AC 100~240V, 50~60 Hz, Output: DC 5V, 2A) 3 CHECKING THE PARTS Once you have unpacked your phone, make sure that you have all the parts shown below. If any piece is missing or broken, please call your customer service. 1. Main Unit 2. Li-Ion Battery 4. Power Adaptor 3. USB Data Cable 5. User Manual 4 SETTING UP YOUR MODEM Installing the modem This modem operates by receiving DC power from the AXESSTEL power adaptor that connects to an electrical outlet. The modem is equipped with a rechargeable battery as a back up in case of an AC power failure. Modem installation 1. Plug the smaller end of the adaptor into the modem as shown and plug the other end into your laptops or PCs USB port 5 SETTING UP YOUR MODEM Installing the USB Driver and AxessManager The entire process will take approximately 20 minutes to complete. Step 1 Once MV100 connect with your laptop, This window will appear. Click Axesstel Manager Setup.exe to install AxessManager. Step 2 Click Next to continue. 6 Step 3 Click Next to continue. Step 4 Click Finish to complete installation of AxessManager. 7 Step 5 Click Axesstel_USB_Driver_Setup folder Step 6 Click Setup.ext to install USB Driver. 8 Step 7 Click Driver Install Step 8 After finishing driver file copy, Modem will be change to Modem mode from CD ROM Mode. Step 9 Axesstel USB Mode will be detected on your PC. Select Next to install USB Driver. 9 Step 10 Select Continue Anyway. Step 11 Select Finish to complete the process. 10 Step 12 Axesstel Diagnostic Port will be detected on your PC. Select Next to install USB Driver. Step 13 Select Continue Anyway. 11 Step 14 Select Finish to complete the process. you can start to run AxessManager 12 SETTING UP YOUR Modem Service Status Check Display in the Service Area When the power cord is connected properly, all segments of the LCD window will turn on briefly. The number of bars of signal strength indicator

(antenna icon) indicates the strength of service signal of the area. The display will show the greeting with date and time. You can change the greeting. (See page 32) Display in area with no service When there is no service signal detected in your area, no antenna bar appears. Contact your service provider for the coverage area information. Also check if the antenna is connected AXESSTEL Fri, Feb 3 3:23pm AXESSTEL 13 GETTING TO KNOW YOUR MODEM and AxessManager 1. Ear-mic: Insert Ear-mic to make a voice call. 2. Power button: Press to turn on / off the modem and hang up the call 3. Accessory Connector Part : Insert battery charger and Mini-B USB Cable 4. Main Display Window : Shows Status of the Modem.

<AxessManager>

1. Change Mode Button : Change to Manager mode from Data Connection Mode 2. Option Button : Change options of Modem and etc. 3. Connection Button : Connect via your operators network 4. Manager : PIMS, SMS and CALL Manager 14 AXESSTEL Fri, Feb 9 5:24P DISPLAY ICONS Icons display on the screen to indicate what features you are using, e.g. signal strength, battery status and etc... Indicate the strength of the signal. More bars indicates stronger signal. Indicates the level of battery power. The more bars, the more power. When the battery is low, the icon blinks, and an alert tone sounds. Indicates that you are using CDMA 200 1X Network. Indicates that you are using 1x EV-DO Network. Indicates that a voice or data call is in progress Indicates that you have text message message. Indicates that you have voice mail message. 15 To Start the AxessManager 16 1. Getting Started When PC and modem is connected via the cable, AxessManager allows you to browse internet, modify modem configurations. In addition, you can perform management tasks for phone numbers such as adding, modifying and deleting them, and you can write messages in your PC and send them to your modem. AxessManager provides the following 5 menus :

Internet Connection : Internet Connection allows you to connect to internet through local network provider. PIMS Manager : You can manage phonebook in your PC. Outlook contacts data can be imported/exported SMS Manager : You can download the Inbox, Outbox, and Draft Box messages in your phone to your PC and edit them, or upload newly created messages to your modem and send them to others CALL Manager : You can make/receive a phone call. Call history can be managed Options : You can manage modem settings 1.1. System Requirements

. The system requirements for using this software are summarized below:

(1) Recommended Specifications CPU : Pentium III 550Mhz or higher, IBM PC-Compatible RAM : 256MB or more VGA : Video card with1024 I 768 resolution and 65536 or more colors HDD : 200MB or more hard disk space Others: CD-ROM Drive or DVD Drive OS : Microsoft W `indows 2000 or higher

.

(2 )Minimum Specifications CPU : Pentium II 300Mhz or higher, IBM PC-Compatible RAM : 128MB or more VGA : Video card with1024 I 768 resolution and 65536 or more colors HDD : 100MB or more hard disk space Others: CD-ROM Drive or DVD Drive OS : Microsoft Windows 2000 or higher 17 1.2. Basic User Interface

. 1. Connect/Disconnect Button : Used to Connect/Disconnect PC and Phone. 2. Manager Menu : Manager Menu allows you to move to each Manager by one-click conveniently. The icon of each Manager is displayed, and when you click each Manager icon, the Sub Menu is displayed in the tree structure. Image Button Name Call Manager PIMS Manager SMS Manager 3. Menu Bar : The basic menu of AxessManager is provided. The Menu Bar provides the following main and sub menus:

Name File File File Tool Sub Menu Open Save Exit To PC Tool To Phone Help Help About AxessManager Help Function Open a file in the PC for each Manager. Save a file in the PC in the format supported by each Manager. Exit the AxessManager program. Send data from Phone to PC when PC and Phone are connected. Send data from PC to Phone when PC and Phone are connected. The AxessManager program information is The User's Guide for AxessManager is displayed. displayed. 4. Toolbar : The frequently used menu items of the Menu Bar are provided as icons. Toolbar provides the following functions :

Name Function Image Button Open Save To PC To Phone Help Opens a file in the PC for each Manager. Saves a file in the PC in the format supported by each Manager. Send data from Phone to PC when PC and Phone are connected. Send data saved in PC to Phone when PC and Phone are connected. The User's Guide for AxessManager is displayed. 18 1.3. Connecting/Disconnecting Your Modem to/From the PC

. Connecting First, connect your PC with the modem using the cable supplied with the modem. Insert the cable firmly to the modem until it clicks into place. Click the icon on your desktop to run the AxessManager Program. Click the Connect/Disconnect button . When the connection is successful, you can use the AxessManager program. All icons will be enabled

. Disconnecting 1) Click the Connect/Disconnect button after finishing your job. The connection is discontinued and the active Connect/Disconnect button is changed to the disabled status. All icons will be disabled 2) To exit the program after finishing the job, click the button at top right of the program window. 3) Disconnect the cable from PC and modem. 19 2. Internet Connect Internet Connection System allows the PC to connect to the internet through network provider with Axesstel Modem. 1. Internet Connection Connect / Disconnect 1.1. Connect Once the initial setup is complete, you can use your modem. To make a communication connection using the modem, click the E button on the main screen. 1.2. Disconnect To disconnect from the communication connection, just click the E button on the main screen. 2. Internet Connection Setup Click the Options button on the main screen of the program to open the following dialog, where you can specify values for many items needed to set up your modem. A short, functional description for each button on the Setup dialog is provided below. Button New Delete Allows you to delete an existing 'Connect Item.'

Allows you to add a new 'Connect Item'. Description Properties Modem Allows you to view and select from a list of modems currently available for connection. Allows you to modify existing 'Connect Item' settings. 2.1. Add Connect Item A description for each item is provided below.

(1) Country: Select a country for the connection via modem.

(2) Network Provider: Select a network provider for the country.

(3) APN: Specify the APN value for the network provider.

(4) Connect Name: Enter the name to be displayed on the 'Connect Item' list.

(5) Phone: Specify the phone number to which modem will connect. The default is *99#.

(6) User Name: If required, enter the user ID for the network provider.

(7) Password: Enter the password for the user name. Select the 'Remember password'

checkbox if you want to save the password.

(8) Send QoS Setting: If you send the QoS value specified on the Advanced Settings window during the connection, select the 'Send QoS Setting' checkbox. Select the 'Connect Item' you want to delete from the 'Connect Item' list in the Setup dialog, and click Delete. The selected 'Connect Item' will be deleted. 2.2. Delete Connect Item 2.3. Modify Connect Item Select the 'Connect Item' you want to modify from the 'Connect Item' list in the Setup dialog, and click Properties. The following dialog appears, allowing you to modify the settings. See Add Connect Item' for detailed descriptions about the settings. 2.4. View Modem List Click Modem in the Setup dialog to open the following Windows default modem settings dialog, where you can change the modem. 20 3. SMS Manager SMS Manager is composed of Inbox for keeping received messages, Outbox for saving messages that have been sent out, Draft Box for saving messages that have not yet sent out, and Saved Box for keeping important messages in the Inbox. You can directly send out messages from your PC to your phone, or download it from phone to PC for more convenient management 3.1. Inbox Manager To use Inbox Manager , click the Inbox icon With Inbox Manager, you can reply to, forward, or delete selected messages. 1. Inbox List View

(1) By default, Inbox List View shows all Inbox messages saved in the phone.

(2) The details of the Inbox message selected from Inbox List View is displayed in the Preview window at bottom.

(3) You can delete the messages displayed in Inbox List View. (You cannot add.) 2. Preview Window & Reply/Forward(Send)

(1) The details of the Inbox message selected from Inbox List View is displayed in the Preview window at bottom.

(2) When you click the Reply button in the Preview window, a new window pops up for you to edit the message and send it to the sender.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click the ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Inbox Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Inbox data is deleted at once from the phone. The deleted Inbox data cannot be restored. 4. To PC The Inbox List View is updated with the Inbox messages currently saved in the phone. 5. To Saved Box Select the data to protect, and press the Save button. The data will be saved in the Saved box. 21 3.2. Saved box Manager To use Saved Box Manager, click the Saved Box icon. With Saved Box Manager, you can reply to, forward, or delete selected messages. 1. Saved Box List View

(1) By default, Saved Box List View shows all Saved Box messages saved in the modem.

(2) The details of the Saved Box message selected from Saved Box List View is displayed in the Preview window at bottom.

(3) You can delete the messages displayed in Saved Box List View. (You cannot add.) 2. Preview Window & Reply/Forward(Send)

(1) The details of the Saved Box message selected from Saved Box List View is displayed in the Preview window at bottom.

(2) When you click the Reply button in the Preview window, a new window pops up for you to edit the message and send it to the sender.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click the ok button to open the following

(7) You can search for existing phone numbers from the contact list. window 3. Delete Saved Box Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Saved Box data is deleted at once from the modem. The deleted Saved Box data cannot be restored. 4. To PC The Saved Box List View is updated with the Saved Box messages currently saved in the modem. 22 3.3. Outbox Manager To use Outbox Manager, click the Outbox icon With Outbox Manager, you can forward, modify, or delete selected messages in Outbox. 1. Outbox List View

(1) By default, Outbox List View shows all Outbox messages saved in the modem.

(2) The details of the Outbox message selected from Outbox List View is displayed in the Preview window at bottom.

(3) You can delete the data displayed in Outbox List View 2. Preview Window & Forward(Send)

(1) The details of the Outbox message selected from Outbox List View is displayed in the Preview window at bottom.

(2) To write a new message, click the Send button in the Preview window. A new window pops up in which you can write a new message and send it to others.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click the ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Outbox Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Outbox data is deleted at once from the modem The deleted Outbox data cannot be restored 4. To PC The Outbox List View is updated with the Outbox messages currently saved in the modem. 23 3.4. Draft Box Manager To use Draft Box Manager, click the Draft Box icon . With Draft Box Manager, you can forward, or delete selected messages in Draft Box. 1. Draft Box List View

(1) By default, Draft Box List View shows all Draft Box messages saved in the modem.

(2) The details of the Draft Box message selected from Draft Box List View is displayed in the Preview window at bottom.

(3) You can delete the data displayed in Draft Box List View . 2. Preview Window & Forward(Send)

(1) The details of the Draft Box message selected from Draft Box List View is displayed in the Preview window at bottom.

(2) To write a new message, click the New button in the Preview window, or double click an empty field in the Draft Box List. A new window pops up in which you can write a new message and send it to others.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Draft Box Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Draft Box data is deleted at once from the modem. The deleted Draft Box data cannot be restored. 4. To PC The Draft Box List View is updated with the Draft Box messages currently saved in the modem. 3.5. Send 3. Save To send a new message, press Send button the Preview window. A new window will pop up. There are 4 buttons in the Send window. 1. Send Send the message directly to the recipients through the modem. 2. Send & Save Send the message directly to the recipients through the modem. The message is also saved in the Outbox in the modem 24 Does not send the message. Message is saved in the Draftbox for later use. Search for phone number from the Phonebook. 4. Search 4. PIMS Manager 3-1 Contacts Manager By using PIMS Manager, you can upload contact data to your modem, or download it from modem to PC for more convenient management. By using the contacts, user can enter/change/erase the name, group, telephone numbers(mobile, home, office), Fax, E-Mail, Address. Also, user can check the number of SIM's and memories that can be registered, and here the number of possible registrations varies depending on the kinds of the connected modem. Therefore, the entries in the contracts can be selectively registered to the SIM and Memories. 1. Upload(Modem -> PC) After confirmation of successful connection with the modem, select the Tool ModemPC menu from the File menu on the top( Or, click the icon ). 2. Download(PC -> Modem) After confirmation of successful connection with the modem, select the Tool PCModem menu from the File menu on the top (Or, click the icon ). 3. Adding Contacts For addition of contacts, use the following rules.

(Data field length may vary in different modem models) Rule No 1 Name Number of name depends on SIM card/Modem specifications Items 2 Phone No For phone numbers, up to 20 digits can be entered Including codes such as

#, -, * in case of saving to SIM. For phone numbers, up to 40 digits can be entered Including codes such as

#, -, * in case of saving to Mem. Particularly, you can insert phone number, home, business, fax number in the case of Mem. 3 Group When you select Mem, only can use. 4 Email When you select Mem, only can use.(able to insert 50 digit) 5 Address When you select Mem, only can use.(able to insert 50 digit) Enter at least one digit in the Name and Phone Number. For Phone Numbers, up to 20 digits can be entered including codes such as, '#', '-', '*'. For Names. When you add data in SIM, the name have a restricted length by SIM and you can only add mobile number. 25 Select the SIM/Mem. Select Group, E-mail, and input a desired text in Address (maximum 50 characters.) You can selectively enter the items listed above except Name and Phone Number.

(at least one phone number should be input). Press the Add button after entering necessary information to complete the addition. To continue adding, repeat the above procedure. 4. Changing Contacts Data

(1) Select the name to be changed from the data list control screen.

(2) After changing and entering items of your choice, press the Edit button to complete the changes. 5. Deleting Contacts Select the name to be deleted from the Contacts Data List Control screen. Also, multiple names can be selected and deleted at the same time just like the Windows. (Shift + Click for selection of block, Ctrl + Click for accumulating one at a time). Click the Delete button to delete the data on the chosen phone number. 6. Finding Phone Number Enter the name you want to find, and then click the Search button. When it is necessary to find the items continuously, press F3 key. 7. Arranging Contacts

(1) To arrange the Contacts, click the item on the Phone Number list.

(2) This will make the Contacts arranged with respect to the chosen item. 8. Making a Call

(1) To make an outgoing call, highlight the item on the Phone Number list, and click the Phone Call button.

(2) This will open the Phone Call Window. 3.2. CSV Conversion This program not only reads and stores data files but also provides functions that convert the address book data to CSV files or read the existing CSV files and store them as current program data files. In other words, the address book data of Outlook can be loaded in this program and, conversely, the data of this program can be stored in the address book of Outlook in CSV format. 1. Reading CSV Files

(1) Perform the following steps to read CSV files:

- Select Tool > Read CSV on the menu.

(2) A dialogue box is displayed as follows. on PIMS Manager. 26

- When the above dialogue box is displayed, click 'Find File' button to select a CSV file stored in your PC.

(3)Then, a list of data read is displayed on Data List Window that shows the phonebook 2. Writing CSV Files

(1) To store existing data as CSV files, perform the following steps.

- Select Tool> Write CSV on the menu.

(2) A dialogue box is displayed as shown below.

- When the above dialogue box is displayed, click 'Find File' button to specify the directory to store files in your PC and enter the name of the file to store.

- And under SCV Type, choose whether the CSV files to store are for Outlook.

- When you have chosen the directory and the CSV file names to store and the desired CSV type, click OK to implement CSV Write.

(3)You can open the CSV files stored as above not only with AxessManager but also with Outlook and view their contents. 3.3. vCard Conversion This program also provides functions that convert the address book data to vCard files or read the existing vCard files and store them as current program data files. In other words, the address book data of AxessManager can be shared with any other programs that support vCard format. 1. Reading vCard Files

(1) Perform the following steps to read vCard files:

- Select Tool > Import vObject on the menu.

(2) A dialogue box is displayed as follows.

- When the above dialogue box is displayed, click 'Find File' button to select a vCard file

(*.vcf) stored in your PC.

(3) Then, a list of data read is displayed on Data List Window that shows the phonebook on PIMS Manager. 2. Writing vCard Files

(1) To store existing data as vCard files, perform the following steps.

- Select Tool> Export vObject on the menu.

(2) A dialogue box is displayed as shown below.

- When the above dialogue box is displayed, click 'Find File' button to specify the directory to store files in your PC and enter the name of the file to store.

- When you have chosen the directory and the vCard file names to store, click OK to implement vCard Export.

(3) You can open the vCard files stored as above not only with AxessManager, but also with Outlook or other programs that support vCard 2.1 format. 3.4. Outlook Conversion This program also provides functions to directly import/export address book data to/from the Outlook. Simply select Import/Export Outlook from the Tool menu, and follow the on-

screen instructions. Please note that only address book data from Outlook 2000 and above versions may be imported/exported. Outlook Express is not supported. 27 5. Phone Call Phone Call window may be opened from the main window, or from the PIMS manager. 1. Making a Call

(1) Press number keypads

(2) Type in numbers directly on the LCD box.

(3) When typing/pressing numbers, press CLR button to erase last number entered, or END button to clear all numbers

(4) Press the Send button to make a call to the number displayed on the LCD box.

(5) Press END button to hang up the call. 2. Receiving a Call

(1) When a call comes in, Phone Call window will pop up with CallerID displayed in the LCD box.

(2) Press any key button, except the END key, to receive the incoming call.

(3) Press END button to hang up the call. 3. Call History

(1) Press LIST button to open Call History Window.

(2) Select Incoming/Outgoing/Missed tabs to view each lists.

(3) Double clicking on the list will send phone number to the LCD box.

(4) Select an item from the list and press Delete button to delete the item.

(5) Select a tab, and press Delete All button to delete all items on that list.

(6) Press Reset button to delete all items on all the lists. 4. SMS

(1) Press SMS button to send a message to the number on the LCD box.

(2) SMS Window will be opened, and Send SMS Window will be opened

(if there is a number on the LCD box).

(3) Refer to SMS section to send a message. 5. PIMS

(1) Press PIMS button to look up a number in the address book.

(2) PIMS Window will be opened.

(3) Refer to PIMS section to manage phonebook data. 28 29 Miscellaneous Specification 30 MV110 MV140 SPECIFICATIONS Frequency Range Channel Bandwidth Stability of frequency External appearance (mm) Weight Sending output Temperature of operation Relative humidity Adapter Battery Rx: 462 ~ 468 MHz Tx: 452 ~ 458 MHz Rx: 869 ~ 894 MHz Tx: 824 ~ 849 MHz Rx: 1930 ~ 1989 MHz Tx: 1850 ~ 1909 MHz CDMA 1.25 MHz 0.4 ppm 97 x 57 x 19.5 mm 150 g (with battery) maximum 0.23W E.R.P

-20 ~ +50 degrees Celsius 5% ~ 90%

Input: AC 100~240V 50~60Hz Output: DC 5V/2A 760mAh, Li-ion 31 SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency

(RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *

Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the when worn on the body , as described in this user guide, is 0.997 W/Kg . (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can 32 Industry Asso-ciation be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: PH7MV140. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications

(CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAFETY INFORMATION FOR RF EXPOSURE Body worm operation This device was tested for typical body-worn operations with the back of the phone kept 25 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 25 mm. separation distance between the users body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. 33 Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS

.POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health c are facilities when any regulations posted in these areas instruct you to do so. RF signals may affect improperly installed or inadequately shielded electronic system in motor vehicles. EXPOSURE TO RF ENERGY Use only the supplied or an approved replacement antenna. Do not touch the antenna unnecessarily when the phone is in use. Do not move the antenna close to, or couching any exposed part of the body when making a call. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received. Including interference that may cause undesired operation. 34 U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

*- Reorient or relocate the receiving antenna.

*- Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.

*- Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance could void the users authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Increase the separation between the equipment and receiver. 35

INTRODUCTION Thank you for purchasing the Axesstel MV100-Series Wireless Broadband USB Modem. This user manual will help you setup, configure and outline best practices for maximizing your wireless home network performance with the Modem. The MV100 USB Modems leverage CDMA2000 1xEV-DO Rev A networks to allow mobile professionals to maintain productivity with secure, high speed access to email, the Internet, data intensive files and multi-media streaming. Voice calling and SMS messaging enable users to stay connected to colleagues, customers and family. A universal USB port allows for quick and easy connectivity to a desktop or laptop PC providing broadband data access from the home, office or while working remotely. Backward compatibility ensures services in CDMA2000 1xEV-DO Rev 0 and CDMA2000 1X coverage areas, while internal receive diversity antennas maximize coverage range and data throughput. The slim and compact MV100 Series Wireless Broadband USB Modems provide busy professionals with the versatility to stay productive and connected virtually anywhere, anytime from the home, office or while traveling. 2 FEATURES 1. PC-Based Connection Manager Software with PIM (Personal Information Manager) Functionality and MS Outlook Phonebook Sync 2. Two Line Color LCD with Status Indicators 3. Receive Diversity for Maximum Range and Throughput 4. Voice and Text Messaging through CDMA2000 1X 5. RUIM Support Optional 6. Internal Li-Ion Battery for additional Transmission Power 7. Phone Book 8. Short Message Service 3 SAFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don't Shake, hit or drop the modem. 3. To clean the outside of the modem, use only a soft, dry cloth. The chemicals in alcohol, benzene or acetone can damage the surface of the modem. 4. Do not twist or pull the Mini-B USB Cable. 5. Do not disassemble the modem. 6. Do NOT use the power adaptor if:

- The power cord is damaged.

- The phone has been dropped or damaged in any way. 7. Frequency and length of use can affect the life of the self-charging battery. Contact your customer service if the battery is not operating properly. 8. Use only the designated self-charging battery. Dispose of exhausted batteries properly. Never discard a battery in or near fire or flame. 9. Do not place the modem near water, for example, near a bathtub, sink, wet basement, or swimming pool. NOTE 1: The input and output voltages are indicated on the adapter.

(Input: AC 100~240V, 50~60 Hz, Output: DC 5V, 2A) 4 CHECKING THE PARTS Once you have unpacked your phone, make sure that you have all the parts shown below. If any piece is missing or broken, please call your customer service. 1. Main Unit 2. Li-Ion Battery 3. USB Data Cable 4. Power Adaptor 5. User Manual 6. Ear-mic (Mono type) 7. CD Package for Win98/ME/NT 5 Install the Modem enabling software and driver. GETTING STARTED Before you can begin using the Modem, you must:

Activate an account and configure the Modem to use your account (unless the Modem has been pre-activated). CONNECTING YOUR MODEM TO THE PC Installing the modem This modem operates by receiving DC power from the AXESSTEL power adaptor that connects to an electrical outlet. The modem is equipped with a rechargeable battery as a back up in case of an AC power failure. Modem installation 1. Plug the smaller end of the adaptor into the modem as shown and plug the other end into your laptops or PCs USB port Note: In case you want to install the driver files (e.g. AxessManager or USB driver files), press and hold down the ON/OFF button while inserting the USB cable to the PC port. From My Computer window, you will see the modem as another drive (i.e. E: drive or F: drive). 6 INSTALLING THE MODEM SOFTWARE System Requirements The system requirements for using this software are summarized below:

(1) Recommended Specifications CPU: Pentium III 550Mhz or higher, IBM PC-Compatible RAM: 256MB or more VGA: Video card with1024 I 768 resolution and 65536 or more colors HDD: 200MB or more hard disk space Others: CD-ROM Drive or DVD Drive OS: Microsoft Windows 2000 or higher (Compatible with Vista version)

(2) Minimum Specifications CPU: Pentium II 300Mhz or higher, IBM PC-Compatible RAM: 128MB or more VGA: Video card with1024 I 768 resolution and 65536 or more colors HDD: 100MB or more hard disk space Others: CD-ROM Drive or DVD Drive OS: Microsoft Windows 2000 or higher

(3) CD Package for Win 98/ME/NT Of USB Driver and AxessManager. If O/S version of your PC is Windows 98/ME/NT, you should use CD Package for installation 7 Installing the USB Driver and AxessManager The entire process will take approximately 10 minutes to complete. Step 1: Press and hold down the ON/OFF button while inserting the USB cable to the PC port. The above window will appear. Click Axesstel Manager Setup.exe to install AxessManager. 8 Note: If auto-install feature is not available and you dont see the pop-up window in step 1, click on Start then My Computer to see the virtual drive associated with the Modem. Double-click on that drive to see the pop-up window shown in step 1 Step 2: Click Next to continue 9 Step 3: Click Next to continue 10 Step 4: Click Finish to complete installation of AxessManager 11 Step 5: Click Axesstel Driver Setup folder and select Install 32 folder

*If you use 64bit processor, please run MSP_Install64.exe under Install 64 folder. 12 Step 6: Click MSP_Install.exe to install USB Driver 13 The following screen will appear Step 7: Click Install Step 8: After finishing driver file copy, Modem will be change to Modem mode from CD ROM Mode. 14 Step 9: Axesstel USB Mode will be detected on your PC. Select Next to install USB Driver. 15 Step 10: Select Continue Anyway. 16 Step 11: Select Finish to complete the process 17 Step 12: Axesstel Diagnostic Port will be detected on your PC. Select Next to install USB Driver. 18 Step 13: Select Continue Anyway. 19 Step 14: Select Finish to complete the process. After this step you can start to use AxessManager 20 Once finished the installation, AxessManager SW utility will appear as a short cut icon in Window. Axesstel Manager 21 QUICK STATUS CHECK The Modem LCD provides a quick check of its status (services, signal strength, battery level) without the need to start AxessManager application. Service Status Check Display in the Service Area When the power cord is connected properly, all segments of the LCD window will turn on briefly. The number of bars of signal strength indicator (antenna icon) indicates the strength of service signal of the area. The display will show the greeting with date and time. You can change the greeting. (See page 32) AXESSTEL Fri, Feb 3 3:23pm Display in area with no service When there is no service signal detected in your area, no antenna bar appears. Contact your service provider for the coverage area information. Also check if the antenna is connected AXESSTEL 22 GETTING TO KNOW YOUR MODEM 1. Modem Interfaces 1. Audio jack: Standard audio jack for audio headset. Insert ear-mic to make and receive voice calls. 2. Power button: Press to turn on / off the modem and hang up the call. To turn the modem ON, press and quickly release this button. To turn it OFF, press and hold the button 3 seconds then release it. The modem will turn off after 1 sec. 3. Accessory Connector Part: Insert battery charger and Mini-B USB Cable. 4. Main Display Window: Shows Status of the Modem. Also, if the Modem is in a voice call, Caller ID and other call-related messages appear here. 23 2. AxessManager GUI AxessManager is a SW utility that allows the administration of your Modem. You use AxessManager to:

Manage Personal Information such as Contact list and phonebook Receive and send SMS messages Customize features and options Initiate data or voice calls 1. Change Mode Button: Change to Manager Mode from Data Connection Mode. 2. Option Button: Change options of Modem such as SMS setting, phone settings etc. 3 4 2 1 3. Connection Button: Connect via your operators network 4. Utility Managers: PIMS, SMS and CALL Manager. Only available after you press the Change Mode button. The image color will change to signal that you can now access the utilities. 24 DISPLAY ICONS Icons display on the screen to indicate what features you are using, e.g. signal strength, battery status and etc... Indicate the strength of the signal. More bars Indicate stronger signal. Indicate the level of battery power. The more bars, The more power. When the battery is low, the icon blinks, and an alert tone sounds. Indicates that you are using CDMA 200 1X Network. Indicates that you are using 1x EV-DO Network. Indicates that a voice or data call is in progress Indicates that you have waiting text messages Indicates that you have voice mail message Fri, Feb 9 5:24P AXESSTEL 25 AxessManager Operation Guide 26 1. Getting Started When the PC and modem are connected via the USB cable, AxessManager allows you to browse internet, modify modem configurations. In addition, you can perform management tasks for phone numbers such as adding, modifying and deleting them, and you can write messages in your PC and send them to your modem. AxessManager provides the following 5 action-buttons that lead to corresponding menus:

Internet Connection: Internet Connection button allows you to connect to the internet through your service provider. imported or exported. PIMS Manager: You can manage phonebook in your PC. Outlook contacts data can be SMS Manager: You can download the Inbox, Outbox, and Draft Box messages in your phone to your PC and edit them, or upload newly created messages to your modem and send them to others. CALL Manager: You can make/receive a phone call. Call history can be managed. Options: You can manage modem settings 27 1.1. Basic User Interface 1. Connect/Disconnect Button: Used to Connect/Disconnect PC and Phone. 2. Manager Menu: Manager Menu allows you to conveniently move to each Manager by one click. The icon of each Manager is displayed, and when you click each Manager icon, the Sub Menu is displayed in the tree structure Name Call Manager PIMS Manager SMS Manager Image Button 28 3. Menu Bar: The basic menu of AxessManager is provided. The Menu Bar provides the following main and sub menus:

Name File File File Tool Sub Menu Function Open Save Exit To PC Open a file in the PC for each Manager. Save a file in the PC in the format supported by each Manager. Exit the AxessManager program. Send data from Phone to PC when PC and Phone are connected. Tool To Phone Send data from PC to Phone when PC and Phone are connected. Help About AxessManager The AxessManager program information is displayed. Help Help The User's Guide for AxessManager is displayed. 29 4. Toolbar: The frequently used menu items of the Menu Bar are provided as icons. Toolbar provides the following functions. Name Image Button Function Open Save To PC To Phone Help Opens a file in the PC for each Manager. Saves a file in the PC in the format supported by each Manager. Send data from Phone to PC when PC and Phone are connected. Send data saved in PC to Phone when PC and Phone are connected. The User's Guide for AxessManager is displayed. 30 1.2. Connecting/Disconnecting Your Modem to/From the PC Connecting 1. First, connect your PC with the modem using the supplied cable. Insert the cable firmly to the modem until it clicks into place. 31 1. Click the icon on your desktop to run the AxessManager Program. Axesstel Manager 2. Click the Connect/Disconnect button. Note that a connection profile needs to be defined and selected before using the Connect/Disconnect button. Please refer to the section Add Connect Item below for more information. When the connection is successful, you can use the AxessManager program. All icons will be enabled. 32 Disconnecting 1. Click the Connect/Disconnect button after finishing your job. The connection is discontinued and the active Connect/Disconnect button is changed to the disabled status. All icons will be disabled 2. To exit the program after finishing the job, click the button at top right of the program window. 3. Disconnect the cable from PC and modem. 2. Internet Connect Internet Connection System allows the PC to connect to the internet through network provider with Axesstel Modem. 1. Internet Connection Connect / Disconnect 1.1. Connect Once the initial setup is complete, you can use your modem. To make a communication connection using the modem, click the E button on the main screen. To disconnect from the communication connection, just click the E button on the main screen. 1.2. Disconnect 2. Internet Connection Setup Click the Options where you can specify values for many items needed to set up your modem. The following screen will appear. button on the main screen of the program to open the following dialog, 33 A short, functional description for each button on the Setup dialog is provided below. Button Description Allows you to add a new 'Connect Item'. Allows you to delete an existing 'Connect Item.'

New Delete Properties Allows you to modify existing 'Connect Item' settings. Modem Allows you to view and select from a list of modems currently available for connection. 2.1. Add Connect Item When you click on the New button, the following window appears to ask for connection parameters 34

(1) Connect Name: Enter the name to be displayed on the 'Connect Item' list.

(2) Phone: Specify the phone number to which modem will connect.

(3) User Name: If required, enter the user ID for the network provider.

(4) Password: Enter the password for the user name. Select the 'Remember password' checkbox if you want to save the password.

(5) Send QoS Setting: If you send the QoS value specified on the Advanced Settings window during the connection, select the 'Send QoS Setting' checkbox. 2.2. Delete Connect Item Select the 'Connect Item' you want to delete from the 'Connect Item' list in the Setup dialog, and click Delete. The selected 'Connect Item' will be deleted. 35 2.3. Modify Connect Item Select the 'Connect Item' you want to modify from the 'Connect Item' list in the Setup dialog, and click Properties. The following dialog appears, allowing you to modify the settings. See Add Connect Item' for detailed descriptions about the settings. 2.4. View Modem List Click Modem in the Setup dialog to open the following Windows default modem settings dialog, where you can change the modem. 3. SMS Manager SMS Manager is composed of Inbox for keeping received messages, Outbox for saving messages that have been sent out, Draft Box for saving messages that have not yet been sent and Saved Box for keeping important messages in the Inbox. You can directly send out messages from your PC to your phone, or download it from phone to PC for more convenient management. 3.1. Inbox Manager To use Inbox Manager, click the Inbox icon With Inbox Manager, you can reply to, forward, or delete selected messages. 36 1. Inbox List View

(1) By default, Inbox List View shows all Inbox messages saved in the phone.

(2) The details of the Inbox message selected from Inbox List View is displayed in the Preview window at bottom. 37

(3) You can delete the messages displayed in Inbox List View. (You cannot add.) 2. Preview Window & Reply/Forward (Send)

(1) The details of the Inbox message selected from Inbox List View is displayed in the Preview window at bottom.

(2) When you click the Reply button in the Preview window, a new window pops up for you to edit the message and send it to the sender.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click the ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Inbox Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Inbox data is deleted at once from the phone. The deleted Inbox data cannot be restored. 4. To PC The Inbox List View is updated with the Inbox messages currently saved in the phone. 5. To Saved Box Select the data to protect, and press the Save button. The data will be saved in the Saved box. 38 3.2. Saved box Manager To use Saved Box Manager, click the Saved Box icon. With Saved Box Manager, you can reply to, forward, or delete selected messages. 1. Saved Box List View

(1) By default, Saved Box List View shows all Saved Box messages saved in the modem.

(2) The details of the Saved Box message selected from Saved Box List View is displayed in the Preview window at bottom.

(3) You can delete the messages displayed in Saved Box List View. (You cannot add.) 2. Preview Window & Reply/Forward (Send)

(1) The details of the Saved Box message selected from Saved Box List View is displayed in the Preview window at bottom.

(2) When you click the Reply button in the Preview window, a new window pops up for you to edit the message and send it to the sender.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click the ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Saved Box Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. 39 The selected Saved Box data is deleted at once from the modem. The deleted Saved Box data cannot be restored. 4. To PC The Saved Box List View is updated with the Saved Box messages currently saved in the modem. 3.3. Outbox Manager To use Outbox Manager, click the Outbox icon With Outbox Manager, you can forward, modify, or delete selected messages in Outbox. 1. Outbox List View

(1) By default, Outbox List View shows all Outbox messages saved in the modem.

(2) The details of the Outbox message selected from Outbox List View is displayed in the Preview

(3) You can delete the data displayed in Outbox List View 2. Preview Window & Forward (Send)

(1) The details of the Outbox message selected from Outbox List View is displayed in the Preview window at bottom. window at bottom.

(2) To write a new message, click the Send button in the Preview window. A new window pops up in which you can write a new message and send it to others.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list. 40

(6) You can type in the number directly, or click the ok button to open the following window

(7) You can search for existing phone numbers from the contact list. 3. Delete Outbox Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Outbox data is deleted at once from the modem The deleted Outbox data cannot be restored 4. To PC The Outbox List View is updated with the Outbox messages currently saved in the modem. 3.4. Draft Box Manager To use Draft Box Manager, click the Draft Box icon. With Draft Box Manager, you can forward, or delete selected messages in Draft Box. 1. Draft Box List View

(1) By default, Draft Box List View shows all Draft Box messages saved in the modem.

(2) The details of the Draft Box message selected from Draft Box List View is displayed in the Preview window at bottom.

(3) You can delete the data displayed in Draft Box List View. 2. Preview Window & Forward (Send)

(1) The details of the Draft Box message selected from Draft Box List View is displayed in the Preview window at bottom. 41

(2) To write a new message, click the New button in the Preview window, or double click an empty field in the Draft Box List. A new window pops up in which you can write a new message and send it to others.

(3) When you click the Forward button in the Preview window, a new window pops up for you to edit the message and send it to the another person.

(4) You can send a message to multiple persons.

(5) Type in the phone number and click the search button to add to the recipients' list.

(6) You can type in the number directly, or click ok button to open the following window.

(7) You can search for existing phone numbers from the contact list. 42 3. Delete Draft Box Data Select the data to delete and press the Delete key on the keyboard. To delete multiple data simultaneously, select them with your mouse while pressing down the Shift or Ctrl key and then press the Delete key. The selected Draft Box data is deleted at once from the modem. The deleted Draft Box data cannot be restored. 4. To PC The Draft Box List View is updated with the Draft Box messages currently saved in the modem. 3.5. Send To send a new message, press Send button the Preview window. A new window will pop up. There are 4 buttons in the Send window. 1. Send Send the message directly to the recipients through the modem. 2. Send & Save Send the message directly to the recipients through the modem. The message is also saved in the Outbox in the modem 3. Save This button does not send the message. Message is saved in the Draftbox for later use. 4. Search Search for phone number from the Phonebook. 43 4. PIMS Manager By using PIMS Manager, you can upload contact data to your modem, or download it from modem to PC for more convenient management. 44 4.1 Contacts Manager By using the contacts, user can enter/change/erase the name, group, telephone numbers (mobile, home, office), Fax, E-Mail, Address. Also, user can check the number of SIM's and memories that can be registered, and here the number of possible registrations varies depending on the kinds of the connected modem. Therefore, the entries in the contracts can be selectively registered to the SIM and Memories. 45 1. Upload (Modem PC) After confirmation of successful connection with the modem, select the Tool then PHONE PC menu from the File menu on the top (Or, click the icon). 2. Download (PC Modem) After confirmation of successful connection with the modem, select the Tool then PC

PHONE menu from the File menu on the top (Or, click the icon). 3. Adding Contacts For addition of contacts, use the following rules.

(Data field length may vary in different modem models) Items No 1 Name Number of name depends on SIM card/Modem specifications Rule 2 Phone No For phone numbers, up to 20 digits can be entered Including codes such as #,

-, * in case of saving to SIM. For phone numbers, up to 40 digits can be entered Including codes such as #,

-, * in case of saving to Mem. Particularly, you can insert phone number, home, business, fax number in the case of Mem. 3 Group When you select Mem, only can use. 4 Email When you select Mem, only can use.(able to insert 50 digit) 5 Address When you select Mem, only can use.(able to insert 50 digit) 46 Enter at least one digit in the Name and Phone Number For Phone Numbers: up to 20 digits can be entered including codes such as, '#', '-', '*'. For Names: When you add data in SIM, the name have a restricted length by SIM and you can only add mobile number. Select the SIM/Mem Select Group, E-mail, and input a desired text in Address (maximum 50 characters). You can selectively enter the items listed above except Name and Phone Number (at least one phone number should be input). Press the Add button after entering necessary information to complete the addition. To continue adding, repeat the above procedure. 4. Changing Contacts Data

(1) Select the name to be changed from the data list control screen.

(2) After changing and entering items of your choice, press the Edit button to complete the changes. 5. Deleting Contacts Select the name to be deleted from the Contacts Data List Control screen. Also, multiple names can be selected and deleted at the same time just like the Windows. (Shift +

Click for selection of block, Ctrl + Click for accumulating one at a time). Click the Delete button to delete the data on the chosen phone number. 6. Finding Phone Number Enter the name you want to find, and then click the Search button. When it is necessary to find the items continuously, press F3 key. 47 7. Arranging Contacts

(1) To arrange the Contacts, click the item on the Phone Number list.

(2) This will make the Contacts arranged with respect to the chosen item. 8. Making a Call

(1) To make an outgoing call, highlight the item on the Phone Number list, and click the Phone Call button.

(2) This will open the Phone Call Window. 4.2. CSV Conversion This program not only reads and stores data files but also provides functions that convert the address book data to CSV files or read the existing CSV files and store them as current program data files. In other words, the address book data of Outlook can be loaded in this program and, conversely, the data of this program can be stored in the address book of Outlook in CSV format. 1. Reading CSV Files

(1) Perform the following steps to read CSV files:

- Select Tool > Read CSV on the menu.

(2) A dialogue box is displayed as follows.

- When the above dialogue box is displayed, click 'Find File' button to select a CSV file stored in your PC.

(3) Then, a list of data read is displayed on Data List Window that shows the phonebook on PIMS Manager. 48 2. Writing CSV Files

(1) To store existing data as CSV files, perform the following steps.

- Select Tool> Write CSV on the menu.

(2) A dialogue box is displayed as shown below.

- When the above dialogue box is displayed, click 'Find File' button to specify the directory to store files in your PC and enter the name of the file to store.

- And under SCV Type, choose whether the CSV files to store are for Outlook.

- When you have chosen the directory and the CSV file names to store and the desired CSV type, click OK to implement CSV Write.

(3) You can open the CSV files stored as above not only with AxessManager but also with Outlook and view their contents. 4.3. vCard Conversion This program also provides functions that convert the address book data to vCard files or read the existing vCard files and store them as current program data files. In other words, the address book data of AxessManager can be shared with any other programs that support vCard format. 1. Reading vCard Files

(1) Perform the following steps to read vCard files:

- Select Tool > Import vObject on the menu.

(2) A dialogue box is displayed as follows.

- When the above dialogue box is displayed, click 'Find File' button to select a vCard file

(*.vcf) stored in your PC. 49

(3) Then, a list of data read is displayed on Data List Window that shows the phonebook on PIMS Manager. 2. Writing vCard Files

(1) To store existing data as vCard files, perform the following steps.

- Select Tool> Export vObject on the menu.

(2) A dialogue box is displayed as shown below.

- When the above dialogue box is displayed, click 'Find File' button to specify the directory to store files in your PC and enter the name of the file to store.

- When you have chosen the directory and the vCard file names to store, click OK to implement vCard Export.

(3) You can open the vCard files stored as above not only with AxessManager, but also with Outlook or other programs that support vCard 2.1 format. 4.4. Outlook Conversion This program also provides functions to directly import/export address book data to/from the Outlook. Simply select Import/Export Outlook from the Tool menu, and follow the on-screen instructions. Please note that only address book data from Outlook 2000 and above versions may be imported/exported. Outlook Express is not supported. 50 5. Call Manager Call Manager may be invoked from the main window or from the PIMS manager by pressing Phone call button. Both actions will bring up a new window that emulated a cell phone. 51 SMS SEND PIMS CLR END 52 1. Making a Call

(1) Press number keypads

(2) Type in numbers directly on the LCD box.

(3) When typing/pressing numbers, press CLR button to erase last number entered, or END button to clear all numbers

(4) Press the Send button to make a call to the number displayed on the LCD box.

(5) Press END button to hang up the call. 2. Receiving a Call

(1) When a call comes in, Phone Call window will pop up with Caller ID displayed in the LCD box.

(2) Press any key button, except the END key, to receive the incoming call.

(3) Press END button to hang up the call. 3. Call History

(1) Press LIST button to open Call History Window.

(2) Select Incoming/Outgoing/Missed tabs to view each lists.

(3) Double clicking on the list will send phone number to the LCD box.

(4) Select an item from the list and press Delete button to delete the item.

(5) Select a tab, and press Delete All button to delete all items on that list.

(6) Press Reset button to delete all items on all the lists. 4. SMS

(1) Press SMS button to send a message to the number on the LCD box.

(2) SMS Window will be opened, and Send SMS Window will be opened

(if there is a number on the LCD box). 53

(3) Refer to SMS section to send a message. 5. PIMS

(1) Press PIMS button to look up a number in the address book.

(2) PIMS Window will be opened.

(3) Refer to PIMS section to manage phonebook data. 54 Miscellaneous Specifications 55 SPECIFICATIONS Frequency Range MV110 MV140 Channel Bandwidth Stability of frequency External appearance (mm) Weight Sending output Temperature of operation Relative humidity Adapter Battery Rx: 462 ~ 468 MHz Tx: 452 ~ 458 MHz Rx: 869 ~ 894 MHz Tx: 824 ~ 849 MHz Rx: 1930 ~ 1989 MHz Tx: 1850 ~ 1909 MHz CDMA 1.25 MHz 0.4 ppm 97 x 57 x 19.5 mm 150 g (with battery) maximum 0.23W E.R.P

-20 ~ +50 degrees Celsius 5% ~ 90%

Input: AC 100~240V 50~60Hz Output: DC 5V/2A 760mAh, Li-ion AXT_v3.0 56 57 SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency

(RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *

Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the when worn on the body , as described in this user guide, is 0.997 W/Kg . (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can 58 Industry Asso-ciation be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: PH7MV140. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications

(CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAFETY INFORMATION FOR RF EXPOSURE Body worm operation This device was tested for typical body-worn operations with the back of the phone kept 25 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 25 mm. separation distance between the users body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. 59 Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS

.POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health c are facilities when any regulations posted in these areas instruct you to do so. RF signals may affect improperly installed or inadequately shielded electronic system in motor vehicles. EXPOSURE TO RF ENERGY Use only the supplied or an approved replacement antenna. Do not touch the antenna unnecessarily when the phone is in use. Do not move the antenna close to, or couching any exposed part of the body when making a call. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received. Including interference that may cause undesired operation. 60 U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

*- Reorient or relocate the receiving antenna.

*- Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.

*- Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance could void the users authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. Increase the separation between the equipment and receiver. 61