FCC ID: 2AAIXVCM713OVO1 RF module-2.4G transceiver

Wireless Backup CameraSolar Powered with Extended Battery Life TABLE OF CONTENTS 1. Introduction ..........................................................................................................................................................................1 2. Package Contents ...............................................................................................................................................................2 3. Product Specifications ......................................................................................................................................................3 4. Before You Install ..................................................................................................................................................................4 5. Installation Guide ................................................................................................................................................................4 6. Settings and Operation ....................................................................................................................................................9 7. Safety Information ............................................................................................................................................................14 8. Maintenance & Warranty ................................................................................................................................................17 9. General Information ........................................................................................................................................................ 20 1. INTRODUCTION Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturers warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact Type S at 866.294.9244 to speak to one of our installation specialists if you have any specific questions regarding the Solar Wireless Backup Camera. BEFORE using the Solar Wireless Backup Camera with 6.8 Widescreen HD Monitor, please read the safety information provided in this user manual. ALWAYS use the product as outlined in this user manual. Please make sure to read and understand all local laws and regulations regarding cameras and their use in a vehicle. Laws vary by state. 1 QUICK INSTALLATION GUIDE 1. Fully charge camera. Fold back camera power port plug and insert included charging cable. Most AC wall adapters will work with the USB charging cable. 2. Plug in monitor, power on camera, and test connection.

(Camera and monitor come pre-paired) 3. Unscrew your license plate. 4. Align camera with license plate and secure to vehicle. See Manual for additional mounting guidance. or Windshield 5. Place Windshield Mount on the windshield or Dash Mount and lower the lever to secure. Attach Dash Monitor onto the Windshield Mount and adjust to your desired position. Dash Mount 6. Mount and power the monitor. Power using the 12V/24V adapter provided. Remove overlay and adjust angle as need. 7. After the monitor has been connected to power, wake up the screen and camera by waving your hand in front of the monitor. NOTE: Fully charge and test camera before installation. 4. BEFORE YOU INSTALL Please charge and test the Camera / Monitor before you install on your vehicle. 1. Fully charge camera. Fold back camera power port plug and insert included charging cable. Most AC wall adapters will work with the USB charging cable. 2. Plug in monitor, power on camera, and test connection. (Camera and monitor come pre-paired) 5. INSTALLATION GUIDE DASH MONITOR INSTALLATION - DASH MOUNT 1. 2. 3. 1. Remove the backing tape on the Dash Mount and attach it to the dashboard. Place the suction cup of the Windshield Mount on top of the Dash Mount and push the knob counter clockwise to lock in place. 2. Attach Dash Monitor to the Windshield Mount and adjust to your desired position. 3. Adjust the tube of the Windshield Mount so the base of the Dash Monitor is touching the surface of the dashboard in order to reduce vibration rattling. 4 DASH MONITOR INSTALLATION - WINDSHIELD MOUNT 1. 2. 3. 1. Place the Windshield Mount on the windshield and push the knob counter clockwise to lock in place. 2. Attach Dash Monitor to the Windshield Mount and adjust to your desired position. 3. Adjust the tube of the Windshield Mount so the base of the Dash Monitor is touching the surface of the dashboard in order to reduce vibration rattling. POWER UP THE DASH MONITOR 1. Take the 12V/24V power adapter and plug adapter into the right side of the Dash Monitor. Plug the other end into 12V/24V power port in your car. 2. Now, the Dash Monitor is ready to be activated by the motion trigger when you wave your hand in front of the monitor or tap once on the Dash Monitor screen. WARNING: Many vehicles provide constant power to the 12V outlet. If your outlet provides constant power, please remember to unplug the Dash Monitor when not in use to avoid draining the vehicle battery. CHARGING THE SOLAR WIRELESS BACKUP CAMERA Fold back camera power port plug and insert included charging cable. Most AC wall adapters will work with the USB charging cable. 12V/24V Power adapter 5 SOLAR WIRELESS BACKUP CAMERA INSTALLATION A) STANDARD INSTALLATION:

1. Unscrew your license plate. 2. Secure the Solar Wireless Backup Camera and license plate with screws back onto the rear of your vehicle. Blue LED light 3. Push and hold the power button of 4. Power on the Monitor with the 12V/24V the Solar Wireless Backup Camera for 1 second, the blue LED light will flash 2 times. adapter. You can see the parking view when you wake up the Solar Wireless Backup Camera by tapping once on the screen or motion trigger in front of Monitor.

*Please follow your local laws and regulations regarding constant monitoring while driving. It is recommended that you glance at the image only when in reverse, and use as an aid. Do not rely solely on the camera view to back up. 6 B) LOWERING INSTALLATION FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE

(This allows more clearance for finger tips to release door latch) 1. Unscrew and remove your license plate. 3. Install the license plate onto the Solar Wireless Backup Camera with the Mounting Screws &

Nuts. 2a. Unscrew and detach the original Mounting Tabs from the back of the Solar Wireless Backup Camera. 4. Secure the Solar Wireless Backup Camera with the license plate back onto the rear of your vehicle. 2b. Install the Two Way Mounting Tabs onto the Solar Wireless Backup Camera. 7 PAIRING The Solar Wireless Backup Camera is pre-paired with the Monitor, and it is set as rear camera as default. You should see the following screen that shows the rear view if the Dash Monitor is powered and the Solar Wireless Backup Camera is fully charged. If you can not see camera image showing on Dash Monitor, pair the Camera with the following steps:

Blue LED light 1. Press and hold the Power Button under the camera for 6 seconds, or until the LED flashes Blue continuously. The camera will be turned on and enter Pairing Mode for one minute. 2. Or press and hold the Power Button for 5 seconds to enter Pairing Mode if the camera is already on. 3. On the Dash Monitor, tap the Settings icon and then tap Pair Camera to enter the pairing screen. Tap Front/

Rear Camera - Click to pair. 10 4. 5. The camera should be paired within 30 seconds. If the pairing is successful, the display will show Pair OK. If no camera is found, then the display will show Pair Fail. In this case, cut off power and reboot the Dash Monitor. If you keep receiving the Pair Fail message after several attempts, please call our technical support to assist in troubleshooting. ROTATE CAMERA Tap on the setting to reverse the camera view. BRIGHTNESS Swipe to adjust screen brightness 11 CONTRAST Swipe to adjust screen contrast OPERATION TIME Tap to choose different operation time. The Dash Monitors parking view operation time will start to count down when you wake up the Solar Wireless Backup Camera. When the timer runs out, the parking view will automatically switch to stand-by mode. MOTION DETECTION Tap to choose motion detection range. Motion detection range can help you adjust the detection distance between you and the Dash Monitor when you drive. You can also disable the function by turning it off. LANGUAGE Select your preferred language. PARKING AID LINE You can turn ON/OFF the parking aid line by tapping the icon. Hold 1 second and swipe up and down to adjust the parking aid line. 12 BACKUP CAMERA POWER, MODES & LED INDICATORS Power / Mode Status LED Indicators Power On Press and hold Power button for 1 second, Camera will power on. Blue LED light flashes 2 times when Camera is powered on. Red LED light flashes 1 time when the Camera is powered off. Power Off Press and hold Power button for 2 seconds and release, Camera will power off. Pairing Mode To begin Pairing Mode, press the Power button on Camera until blue LED light flashes quickly. Now Camera is in Pairing Mode. Blue LED light flashes quickly for 1 minute or until pairing success is complete. Low Battery Power Off Camera will power off when the battery is used up. Red LED light flashes to indicate low battery. USB Charging This LED light is next to the MicroUSB port. While charging, the Red LED light will remain solid. When Camera is fully charged, Red LED light turns off. ADJUST CAMERA VIEW Swipe up and down to adjust view. NOTE: You cannot adjust the parking aid line and camera view in the split screen mode. DASH MONITOR INDICATOR If you see this message on the Dash Monitor, that means the battery of the Solar Wireless Backup Camera is lower than working voltage. Please fully charge the camera. 13 7. SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions of 12V Car charger for Model BT533033. 2. Before using the product, read all instructions and cautionary markings. 3. Do not expose car charger to rain, moisture, or snow. 4. Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury to persons. 5. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter connector rather than cord when disconnecting car charger. 6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to 7. Do not operate car charger with damaged cord or cigarette lighter connector replace it damage or stress. immediately. 8. Do not operate car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceperson. 9. Do not disassemble car charger; take it to a qualified serviceperson when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 10. To reduce risk of electric shock, unplug charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life. The Solar Wireless Backup Camera is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. However, you, the driver, must use it safely and properly. Use of the Solar Wireless Backup Camera is not a substitute for safe, proper and legal driving. Never back up while looking only at the screen. You should always check behind and around the vehicle when backing up just as you would if the vehicle did not have the Solar Wireless Backup Camera. Always make sure your intended path is clear. If you back up while looking only at the Monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in injury or death. Always back up slowly. 14 Never depend on the Solar Wireless Backup Camera entirely when backing up. The image on the screen is different from actual conditions. Objects viewed in the Dash Monitor differ from actual distance because a wide-angle lens is used. Objects in the Dash Monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. The Solar Wireless Backup Camera night vision feature that is high performance brightness with colorful image is an aid to a driver but is limited. Always use your own eyes to confirm the vehicles surroundings, as the displayed image may be faint or dark, distorted, or not entirely visible. Always check behind and all around the vehicle visually with mirrors before proceeding. The area displayed by the Solar Wireless Backup Camera is limited. The Solar Wireless Backup Camera does not display objects that are close to or below the bumper, underneath the vehicle, or objects out of the Cameras field of view. The area displayed on the screen may vary according to vehicle orientation or road conditions. Be sure to check the Cameras position and mounting angle before each use. Make sure the trunk, hatch, or backdoor is completely and securely closed when backing up. If the back of the vehicle is hit, the position and mounting angle of the Solar Wireless Backup Camera may change. When washing the vehicle with high pressure water, be sure not to spray it around the Solar Wireless Backup Camera. Otherwise, water may enter the Camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. Do not strike the Solar Wireless Backup Camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. This product will only provide images of items that are within the field of view of the Solar Wireless Backup Camera. Thus, it is imperative that the Solar Wireless Backup Camera should be kept clean and unobstructed, and should be mounted so that its field of view includes the entire area behind your vehicle. Adhere to all applicable traffic laws and motor vehicle regulations applicable to the device. Consult local laws and regulations for any restrictions on installation or use. Never allow children to play with the device. Small parts may be a choking hazard. There is a plastic cover over the Solar Wireless Backup Camera. Do not scratch the cover when cleaning dirt or snow from the cover. 15 The Solar Wireless Backup Camera has a water resistant construction. Do not detach, disassemble or modify it. This may cause incorrect operation. Solar Wireless Backup Camera is waterproof. Do not submerge Solar Wireless Backup Camera in water, which can cause internal damage to the Camera. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. The Digital Camera can withstand the effects of rain, snow, and inclement weather. When strong light directly enters a camera, objects may not be displayed clearly. The screen may flicker under fluorescent light. The colors of objects on the Dash Monitor may differ somewhat from those of the actual object. If dirt, rain or snow attaches to the Camera, the Monitor may not clearly display objects. If water droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth. Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth. Will work up to 33 feet. ALWAYS engage Parking/Emergency/Hand Brakes of the vehicle when testing the system. SAFETY AROUND AND BEHIND OTHER VEHICLES Using a Solar Wireless Backup Camera is not enough to completely overcome a vehicles blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a back-over accident:

Walk completely around your vehicle before getting in. Check for kids, toys, and pets before entering the vehicle and starting the engine. Know where children are. Have children stand in a place where they are in full view. Be aware of young children. Young children are small and hard to see. Parents, caregivers and all adults need to be vigilant in supervising children, especially when children are in the yard, driveway or parking lot playing near parked cars. Roll down your window so you will be able to hear what is happening outside your vehicle. 16 Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child. Teach children to move away from a vehicle whenever it is started. 8. MAINTENANCE & WARRANTY If dirt, rain or snow attaches to the Camera, the Monitor may not clearly display objects. If water droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth. Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth. CLEANING WARRANTY Type S LIMITED WARRANTY Type S warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, Type Ss liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and Type S makes no other warranty of any kind aside from the limited express warranty stated above. NOTE: Warranty only applies for North American customers of purchases made in North America. CONDITIONS OF WARRANTY If during the 1 year warranty period your new product is found to be defective, Type S will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:

1. All repairs must be performed by Type S. 17 2. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale. 3. The equipment must not have been altered or damaged through negligence, accident, improper operation, or failure to follow the product instructions for installation, use, or care. 4. The replacement of parts is excluded from the warranty when replacement is necessary due to normal wear and tear. 5. Repair or replacement parts supplied by Type S under this warranty are protected only for the unexpired portion of the original warranty. 6. This is a repair or replace warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle. OWNERS RESPONSIBILITIES:

Type S will make every effort to provide warranty service within a reasonable period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1.866.294.9244 DURING REGULAR BUSINESS HOURS MONDAY THROUGH FRIDAY 8:00 AM TO 5:00PM. NOTE: Toll Free # is for North America Customers ONLY. See Customer service section for customer contact numbers for other regions/offices. For customer service and technical support, please call us at 1.866.294.9244. If at that time it is determined that a replacement unit is needed, the support representative will issue a Return Authorization and instruct on how to get a new unit. Type S makes no other warranty of any kind aside from the limited express warranty stated herein. DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIES, IS MADE AS TO THE SOLAR WIRELESS BACKUP CAMERA. EXCEPT AS EXPRESSLY SET FORTH HEREIN, TYPE S AND/OR ITS AFFILIATES EXPRESSLY 18 DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Type S and/or its affiliates do not guarantee or promise that the user of Solar Wireless Backup Camera will not be in an accident or otherwise not collide with an object and/or person. Our Solar Wireless Backup Camera is not intended in any way to be a substitute for careful and cautious driving or for the consistent adherence to all applicable traffic laws and motor vehicle safety regulations. The Solar Wireless Backup Camera is not intended to be a substitute for rearview mirrors or for any other motor vehicle equipment mandated by law. Even when properly installed, our Solar Wireless Backup Camera has a limited field of vision and does not provide a comprehensive view of the rear area of the vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely. Type S and/or its affiliates are not responsible for a users intended or actual use of the Solar Wireless Backup Camera. In no event shall Type S and/or its affiliates have any liability for any losses (whether direct or indirect, in contract, tort or otherwise) incurred in connection with the Solar Wireless Backup Camera, including but not limited to damaged property, personal injury and/or loss of life. Neither shall Type S and/or its affiliates have any liability for any decision, action or inaction taken by any person in reliance on the Solar Wireless Backup Camera, or for any delays, inaccuracies and /or errors in connection with the Solar Wireless Backup Camera and its functioning. Type S and/or its affiliates shall have no responsibility or liability for damage and/or injury resulting from accidents occurring with vehicles having the installed, and Type S and/or its affiliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product. 19 9. GENERAL INFORMATION CUSTOMER SERVICE/CONTACT IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/

EXCHANGE THE PRODUCT. FCC / IC Compliance Statement:

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. 20 RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. L'appareil a t valu pour rpondre aux exigences gnrales d'exposition RF. le dispositif de a t valus rpondre gnral rf exposition exigence. Contains Transmitter Module IC: 8102A-VCM713OVO1 Contains Transmitter Module FCC ID: 2AAIXVCM713OVO1 CAN ICES-3 (B)/NMB-3(B) Wireless Backup Camera Solar Powered With 6.8 Widescreen HD Monitor BT533033 Responsible Party:

Type S 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 Tel: 866-294-9244 21 A Horizon Brands Company 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 1.866.294.9244 | info@typesauto.com 2020 Type S. All rights reserved. www.typesauto.com 22

JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) The JM7130S20PL-B module is designed for 2.4GHz ISM band wireless applications using GFSK transceiver. This module features a fully programmable frequency synthesizer by SPI. 1.0 General Description The data rate is 4Mbps. 2.0 Electrical specification Item Specification Remark Supply Voltage 3.3V Current Consumption

<10uA (typical) @Sleep mode 2.5mA (typical) @Standby mode 250mA (typical) @Tx mode 30mA (typical) @Rx mode

+/-0.1V Typical Frequency 2400 2483.5MHz ISM band Transmit Output Power Rx Sensitivity

-90dBm (typical) @ 4M mode, Dev = 1MHz Typical, BER1E-3, With Gaussian filter. Modulation GFSK Transmission Distance Dipole Antenna:

> 50 meters (typical) - Closed area

> 350 meters (typical) - Open area (LOS) Line-of-Sight Connector Interface 10 pin 2.0mm header Dimension 23 (L) x 21.5(W) x 4.2(H) mm (+/-0.5mm)

- With External Crystal

- Without connector Crystal Frequency 16MHz +/-20ppm Operating Temperature

-20 ~ +70C V1 2018 1/8 JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) 3.0 Module Picture Top view V1 2018 2/8 JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) Top view 4.0 Mechanical Dimension V1 2018 Side View 3/8 JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) 5.0 Interface Pin Pin name Comment No. 1 2 3 4 5 6 7 8 9 10 11 REGI33 CKO GIO2 GIO1 SDIO SCK SCS TX SW RX SW GND Xtal in RF module supply voltage input Clock output of A7130 General Purpose I/O 2 General Purpose I/O 1 SPI Data I/O SPI Clock SPI Chip Selection RF front end PA/LNA select RF front end PA/LNA select GND Clock in for A7130 Note 3.3V Active low Active low 6.0 PA & LNA control state Control function RX ON TX ON TR/X OFF Inhibition TX SW RX SW 1 0 0 1 1 1 0 0 7.0 Reflow Profile V1 2018 Jess Technology Co., Ltd. 4/8 JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) 8.0 Ordering Information Part number Size (mm) Remark JM7130S20PL-B 23 (L) x 21.5(W) x 4.2(H) mm (+/-0.5mm) With 4Mbps data rate V1 2018 5/8 JM7130S20PL-B RF Module 2.4GHz, GFSK 4Mbps Transceiver

(RoHS Compliant) 9.0 JM7130S20PL-B Packing Method V1 2018 6/8 FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions cannot be met (for example co-

location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The JM7130S20PL-B module is designed to comply with the FCC statement. FCC ID is 2AAIXVCM713OVO1. The host system using JM7130S20PL-B, should have label indicated it contain modular's FCC ID: 2AAIXVCM713OVO1. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of transmitter and its antenna(s). V1 2018 7/8 IC Warning:

If the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:

Contains Transmitter Module IC: 8102A-VCM713OVO1 When the module is installed inside another device, the user manual of this device must contain below warning statements:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a t valu rpondre gnral rf exposition exigence.pour maintenir la conformitavec les directives d'exposition du RSS-102-Radio Frquence (RF). ce matriel doit tre install etexploit une distance minimale de 20 cm entre le radiateur et votre corps. V1 2018 8/8

_FCC&IC ID Label Sample and Label Location AxiaInnovationsLTD. RFmodule2.4Gtransceiver ModelNo.: FCCID:

Axia Innovations LTD. PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg Date: 28 May 2020 RE : LETTER OF AGENCY AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This agreement is valid one year until 28 May 2021 until further notice. If you have any questions, please feel free to contact me Yours sincerely, Signatory Printed Name: Eric Lau Position: Engineer

Axia Innovations LTD. Long -term Confidentiality Request Date:28 May 2020 PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg FCC ID: 2AAIXVCM713OVO1 To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Description Parts List Tune-Up Info The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Printed Name: Eric Lau Position: Engineer

Axia Innovations LTD. Date: 29 May 2020 PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg Attn: Reviewing Engineer To Whom It May Concern:

Brand name: N/A Model name: JM7130S20PL-B FCC ID: 2AAIXVCM713OVO1 Subject: PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL We, (applicant name), hereby requests for part 15 unlicensed modular transmitter approval of our device, described as follows:

In FCC Public Notice DA 00-1407 released June 26, 2000 there are eight numbered requirements that our device complies with:

1. The modular transmitter must have its own shielding. Device is equipped with metal shielding to cover RF section. This module uses SMD type components which can not be modified by user. 2. The modular transmitter must have buffered modulation/data inputs Complies, 16MHz crystal has buffered modulation/data inputs. 3. The modular transmitter must have its own power supply regulation Complies, Powered by 3.3VDC 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The host with the modular is Product name: Wireless Backup CameraSolar Powered with Extended Battery Life, Model: BT530033, BT530033-60, Brand name: Type S ; The host product was made by the ADC Solutions Auto, LLC DBA Type S. Device is not equipped with antenna. The Host integrator equip the modular with antenna in the host product and the antenna is a intergral antenna and un-replaceable. 5. The modular transmitter must be tested in a stand-alone configuration Complies, The Modular can power by 3.3V. We can control the module to transmit the RF signal by update firmware of the product. 6. The modular transmitter must be labelled with its own FCC ID number Complies,Please see lable location. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The modular transmitter is powered by whole machine, and the parameters of the wireless are determined by the firmware and the wireless module. There is no authority outside the use of. 8. The modular transmitter must comply with any applicable RF exposure requirements. Complies, This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. Yours sincerely, Signatory

[Eric Lau, Engineer]