FCC ID: X4GS00947 Body Worn Video Camera

Function LED Operation LED connection socket on/off switch lens speaker dual-channel microphone upload status LED on/off indicator Function button EVENT button Battery LED Battery status button back lock camera AXON

TASER Axon Mic User Manual Model AX1004 IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.TASER.com MMU00## Rev: X1 Page 1 of 22 Table of Contents Chapter 1: Introduction ...................................................................................................................... 4 What Is the Axon Mic? ..................................................................................................................... 4 Important Safety and Health Information ................................................................................... 4 Additional Reading .......................................................................................................................... 4 Chapter 2: Getting to Know Your Axon Mic ..................................................................................... 5 Accessories ....................................................................................................................................... 7 Parts ............................................................................................................................................... 8 Assembly and Use ....................................................................................................................... 8 Chapter 3: Recording with the Axon Mic ...................................................................................... 10 Operating Modes .......................................................................................................................... 10 BUFFERING Mode (Turning on the Microphone) ................................................................. 10 EVENT Mode (Starting Recording) .......................................................................................... 11 Adding Markers to Recorded Audio........................................................................................... 11 Battery Status ................................................................................................................................ 12 Configuring Your Axon Mic ......................................................................................................... 12 Adjusting the Audio Prompt Volume ..................................................................................... 12 Turning off the Microphone LEDs (Stealth Mode) ............................................................... 12 Other Settings ........................................................................................................................... 13 Chapter 4: Notification Reference Tables ..................................................................................... 14 Audio Prompts .............................................................................................................................. 14 LED Status ...................................................................................................................................... 14 Operation LED ........................................................................................................................... 14 Function LED .............................................................................................................................. 14 Battery LED ................................................................................................................................ 15 Upload Status LED .................................................................................................................... 15 Chapter 5: Axon Signal Operations................................................................................................ 16 Chapter 6: Care and Maintenance ................................................................................................. 17 Cleaning the Axon Mic ................................................................................................................. 17 Charging the Battery .................................................................................................................... 17 Replacing the Battery ................................................................................................................... 17 Page 2 of 22 Chapter 7: Troubleshooting ............................................................................................................ 19 Customer Service .......................................................................................................................... 19 Warranty Policy ............................................................................................................................. 19 Warnings ........................................................................................................................................ 19 Radio Waves .................................................................................................................................. 19 Declaration of Conformity ................................................................................................... 21 Page 3 of 22 Chapter 1: Introduction What Is the Axon Mic?

The Axon Mic is an audio recording device. This microphone is designed for use in tough environmental conditions encountered in law enforcement, corrections, military, and security activities. The Axon Mic is designed to record events for secure storage, retrieval, and analysis via Evidence.com services. The recorded events are transferred to your storage solution via the Axon Dock, Axon View XL, or by using Evidence Sync software installed on a Windows computer. The Axon Mic has 2 operating modes designed to accommodate the needs of law enforcement, corrections, security, and the military. The default mode, or BUFFERING mode, ensures the microphone is ON and ready to record prior to the user activating the EVENT mode. Important Safety and Health Information Read, understand, and follow all warnings and instructions before using this product. The most up-to-date warnings and instructions are available at www.taser.com. Additional Reading This manual explains how to operate the Axon Mic hardware. Other manuals cover additional aspects of the Axon Mic and Axon Fleet system. These documents are available at www.taser.com. The Axon Academy website explains how to register for the Evidence.com website, configure settings, install Evidence Sync software, assign personnel to devices, recharge your device, and transfer audio from an Axon device to a computer. Visit academy.axon.io/. Detailed instructions for using Axon devices and other TASER products with Evidence Sync are available in the Evidence Sync User Manual. If you have an Axon Dock, see the Axon Dock Quick Start Guide for how to transfer information and recharge your Axon Mic. The Axon View XL Manual provides instructions for using your mobile data terminal (MDT) with your Axon Fleet system. Page 4 of 22 Chapter 2: Getting to Know Your Axon Mic The Axon Mic includes physical controls to enable audio capture while providing visual, audible, and vibration notifications of the Axon Mics state of operation. Function LED top view Operation LED bottom view Function LED front view upload status LED On/off switch on/off indicator speaker Function button EVENT button Battery LED dual-channel microphone Battery status button Operation LED Shows the Mics current operating mode (for Battery status, see the battery LED, described below). Operating Mode Operation LED Recording Recovering interrupted video Buffering Booting up/powering down Error state Blinking Red Blinking Green Solid Red When the Function LED also is blinking red. When the Function LED also is solid red. Page 5 of 22 Function LED Shows when certain functions are enabled. Function Enabled Function LED Mute Device error Bluetooth feature is booting up Blinking blue Solid red Solid blue Wireless accessory configuration (WAC) Blinking magenta Use the power switch to turn the Mic off and on. Connection Socket Enables data transfer and recharging. On/Off Switch Turns the Mics power on or off. On/Off Indicator When the Mics power is turned on, the red portion is exposed. When the Mic power is turned off, the red portion is covered from view. Speaker Provides audio notifications. Function Button Used in device pairing, to mute the device, and to add markers to the audio as it is recorded. EVENT Button Used to start and stop recording. (Double-press to start; hold for 4 seconds to stop recording.) The Mic might take several additional seconds to close out of the video when it is powered off before stopping an event. Battery Status Button When pressed, the Battery button lights up the Battery LED, which momentarily indicates the remaining battery capacity only (it does not indicate the operating mode). Battery LED When lit, momentarily indicates the remaining battery capacity (it does not indicate the operating mode). Battery Status Battery LED Battery capacity is 41100 percent Battery capacity is 2040 percent Green Yellow Battery capacity is less than 20 percent Red during operation; flashing red and yellow during charging Battery is critically low Blinking red and yellow When you turn the Mic on, the Operation LED turns solid red until the system is ready to use. Then the Operation LED blinks green (BUFFERING mode) and the Battery LED goes out. Dual-Channel Microphone For audio recording. Page 6 of 22 Upload Status LED Indicates status when the Mic is uploading data to the Evidence.com website via the Axon Dock. System Status Upload Status LED Initial connection (momentary) Solid red (for 20 seconds or fewer) In queue awaiting upload Device ready (all videos uploaded successfully) and fully charged Device not assigned, agency mismatch, or device error Uploading data Firmware update, internal battery charging, extremely low battery, or memory full Transfer error, device re-trying to transfer Network error (no connection) Axon Dock has no communication with the device. Contact TASER customer service. Solid yellow Solid green Blinking red Blinking yellow Blinking red and yellow Blinking green and yellow Blinking red, yellow, and then green (cycling all colors) LED off Pressing buttons causes the Axon Mic to emit audio alerts (beeps) to indicate system actions. See Chapter 4: Notification Reference Tables for more information. Accessories The Axon Mic is designed to work with the new Axon RapidLock mounting system. The RapidLock mounting system consists of the attachment piece (called the key) on the device and the various mounting options including the attachment receiver (called the lock). To engage the Axon RapidLock, insert the key of the device into the lock of the mount and turn it 90 degrees counterclockwise (when you are looking straight at the mount). To release the Axon Mic from the mount, turn the Axon Mic 90 degrees clockwise. The various mounts that use this system can be used with a wide variety uniforms, and holds the Axon Mic to your shirt, patrol vest, jacket, or belt. Page 7 of 22 Parts back lock microphone Assembly and Use Read Important Safety and Health Information (Chapter 1) before performing these steps. 1 2 Insert the key on the back of the Axon Mic into the lock. Twist the RapidLock mount counterclockwise, 90 degrees. 3 Place the magnetic back underneath the shirt, patrol vest, or whatever you are using. 4 Hold the back in place, and place the RapidLock mount over the back. Magnetic attraction will hold the microphone in place. 1 2 Page 8 of 22 Page 9 of 22 Chapter 3: Recording with the Axon Mic Operating Modes The Axon Mic has 2 operating modes:

1 BUFFERING (turning on the device and starting pre-event buffering) 2 EVENT (event recording) BUFFERING Mode (Turning on the Microphone) Move the ON/OFF switch on the Axon Mic to the ON position. With the microphone turned on, the Axon system is in the BUFFERING mode. When BUFFERING begins:

The Operation LED on the Axon Mic will blink green. By default, audio in the BUFFERING mode is OFF. The Mic will not be capturing anything unless the agency has configured audio in buffer ON, and will not record to permanent memory while in BUFFERING mode. When configured at the agency level to be ON, buffered audio duration is 30 seconds by default (00:00:30). When you activate the EVENT mode, the buffered audio (if this feature is enabled at the agency level) captured directly before the event, up to 30 seconds, will be saved and attached to the event in permanent memory. This feature is intended to capture the audio of an incident just before your activation of EVENT mode. With default settings, the system does not capture audio in BUFFERING mode, so anything recorded in that mode will be video-only. Buffering mode starts only after Page 10 of 22 the Axon Mic is turned on. The system does not record when the microphone is turned off. Notes:

An agency can turn off the BUFFERING mode. If your agency has deactivated the BUFFERING mode, your Axon system will operate the same way as described in this manual, but the device will not record any audio until you double-press the EVENT button. An agency can extend the BUFFERING modes duration to 2 minutes total (00:02:00). An agency can configure the BUFFERING mode so it records audio. EVENT Mode (Starting Recording) 1 When you need to record, quickly double-press the EVENT button on the device. The system now records audio. If audio in buffer is configured to be on, the buffered audio directly preceding the event will be saved and attached to the event recording. (Remember, with default settings, the buffer will not contain audio.) The moment you double-press the EVENT button, audio will be recorded from the microphone and GPS coordinates (if the system is paired to a GPS-capable smart phone) will be recorded. This will continue throughout the duration of the recording until you terminate the recording. The Axon Mic provides you with indications that it is recording in EVENT mode:

At the start of an event and every 2 minutes during an event, the system will beep twice. The Operation LED on top of the device will blink red. To stop recording and return to BUFFERING mode, press and hold the EVENT button for approximately 4 seconds. The system will beep once (with a long tone). To end a recording and turn off the system, move the on/off switch to the off position. When you end a recording with the on/off switch you will not go into BUFFERING mode; instead the system will turn off completely. Note: An event not recorded by the microphone cannot be played back or downloaded to your computer. 2 3 Adding Markers to Recorded Audio The Function button also can be used to add a marker to recorded audio that will show when the video is replayed on Evidence.com and documented in the audit trail for the device. Markers are most useful for documenting a moment that you will want to jump to Page 11 of 22 quickly at a later time when re playing the video. If you want to add a marker to a video while you are recording:

Press and release the Function button within 1 second. Battery Status Press the Battery button to determine the percentage remaining in the battery. See Chapter 2: Getting to Know Your Axon Mic for details on the Battery LED functions. Configuring Your Axon Mic Adjusting the Audio Prompt Volume 1 Connect the Axon Mic to the Evidence Sync application. 2 3 Select the device settings. Select the desired volume settings for the audio beeps recorded by the device. The volume has 4 settings. At each level, the Axon Mic beeps, providing you with a sample of the volume:

Low Medium High Off Turning off the Microphone LEDs (Stealth Mode) For some situations, you may wish to turn off the lights on your Mic. You can turn off the lights through the Evidence Sync software or by using the Battery button. To turn the lights off using the Battery button:

Press and hold the Battery button for 10 seconds. To turn the lights back on:

Press and hold the Battery button for 10 seconds. To use Evidence Sync:

1 Connect the Axon Mic to the Evidence Sync application. 2 3 Select the device settings. Select the option to turn off the device LEDs. Page 12 of 22 The Operation LED flashes red, yellow, and then green before shutting down the lights. Pressing the Battery button will momentarily light both the Operation LED and the Battery LED, displaying the current operating mode and battery level. For interpreting the LED colors, see Chapter 2: Getting to Know Your Axon Mic. To turn the lights back on:

1 Connect the Axon Mic to the Evidence Sync application. 2 3 Select the device settings. Select the option to turn on the device LEDs. Other Settings Your organizations administrator can further configure your Axon Mic with these features:

Pre-event buffer of up to 2 minutes Axon Signal-enabled Bluetooth wireless technology Page 13 of 22 Chapter 4: Notification Reference Tables Audio Prompts The Axon Mic emits beeping sounds called audio prompts to notify you of the system status. These audio prompts usually occur after you perform an action with the microphone. These audio prompts are accompanied by a vibration that matches the beeps. Operating Mode Audio Notification Haptic Notification Powering on or off One beep Once

(Vibration) Recording an event Two beeps (every 2 minutes) Twice (every 2 minutes) Press the Battery button while the device is recording The device is ending an event and re- turning to BUFFERING mode The battery is at 20 percent capacity or lower The devices memory is full Two beeps None One long beep Once, long-duration Four quick beeps (every 5 minutes) Four times, quickly, every 5 minutes Three beeps. The device will not start recording. Three times LED Status Operation LED Operating Mode Operation LED Recording Recovering interrupted audio recording Buffering Booting up/powering down Error state Blinking Red Blinking Green Solid Red

* When the Function LED also is blinking red.

** When the Function LED also is solid red. Function LED Function Enabled Function LED Mute (no audio capture) Device error*

Bluetooth feature is booting up Blinking blue Solid red Solid blue Page 14 of 22 Function Enabled Function LED Wireless accessory configuration (WAC) Blinking magenta Use the power switch to turn the Axon Mic off and on. Battery LED Battery Status Battery capacity is 41100 percent Battery capacity is 2040 percent Battery capacity is less than 20 percent Battery LED Green Yellow Red during operation; flashing red and yellow during charging Battery is critically low Blinking red and yellow Upload Status LED System Status Initial connection (momentary) In queue awaiting upload Device ready (all files uploaded successfully) and fully charged Device not assigned, agency mismatch, or device error Uploading data Firmware update, internal battery charging, extremely low battery, or memory full Transfer error, device re-trying to transfer Network error (no connection) Axon Dock has no communication with the device. Contact TASER customer service. LED Indication Solid red (for 20 seconds or fewer) Solid yellow Solid green Blinking red Blinking yellow Blinking red and yellow Blinking green and yellow Blinking red, yellow, and then green (cycling all) colors) LED off Page 15 of 22 Chapter 5: Axon Signal Operations Axon Signal technology is included with the Axon Fleet cameras and microphone device. However, your agencys administrator must have activated the Axon Signal capability for it to work. When it is active, Axon Signal technology takes your devices from BUFFERING to EVENT mode automatically. Emergency vehicles can be equipped with an Axon Signal Unit (ASU). With light bar activation, or other activation triggers, the ASU sends a signal to your Axon devices. Upon processing this signal, your Axon devices transition from BUFFERING to EVENT mode. When your device starts recording, you will hear two beeps. The ASU has a range of approximately 30 feet (9.1 meters). Another vehicles light bar activation may cause your Axon devices to start recording if the light bar is equipped to do so. The ASU can only send a signal to tell the device to start recording. Axon Signal technology does not end recording. If a light bar is turned off, the device will continue to record. The ASU cannot turn an Axon system on. If the Axon devices are turned off, they will not record even if an ASU sends an activation signal. Page 16 of 22 Chapter 6: Care and Maintenance Cleaning the Axon Mic Use a soft, damp cloth to clean the surface of the Axon Mic. Do not use harsh cleaners or solvents. Do not immerse the Axon Mic in water or cleaning solutions. Charging the Battery A fully charged device battery should provide enough power for approximately 12 hours of normal operation. Recharging a battery after a 12-hour use can take up to 6 hours if you are recharging your Axon Mic from a wall outlet or Axon Dock. Recharging could take considerably longer if you are recharging from a computer. If the battery depletes significantly during use, you will hear 4 quick tones repeating every 5 minutes. This message indicates that less than approximately 20 percent of the battery capacity remains. Always recharge a depleted battery as soon as reasonably possible. You can use an Axon Dock, wall charger, or computer to charge the battery. Using a non-TASER approved wall charger may degrade device performance and will void the warranty. If the Axon Mic is to be stored for a long time, the Battery LED should be yellow when you put the camera in storage. After an Axon Mic has been stored 6 months, the device should be run until the battery is depleted and then the battery should be recharged. Replacing the Battery Replacement batteries are combined with the back portion of an Axon Mic. Replacing a battery involves removing the back of the device and installing a new back. 1 Turn the Axon Mic off. 2 Using a Torx T6 screwdriver, remove the screws from the Axon Mic. Page 17 of 22 3 Remove the back of the device. 4 Put the new device back in place with the device front. 5 Using a Torx T6 screwdriver, fasten the screws into the new device back. Do not over-tighten. Page 18 of 22 Chapter 7: Troubleshooting If you experience difficulty with your Axon Mic, first power the device down, and start it again. Customer Service Visit www.taser.com and view the Support options, or call 1-800-978-2737. Warranty Policy TASER International warranty provisions are applicable on all Axon Mic products. See TASER Internationals website, www.taser.com, for detailed warranty information. Warnings For a full list of the warning associated with this product, see www.taser.com. Radio Waves Changes or modifications to the equipment not expressly approved by the manufacturer could void the product warranty and the users authority to operate the equipment. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. Before a device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the governmentadopted requirement for safe exposure. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate Page 19 of 22 radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult TASER International Customer Service for help. FCC/IC NOTICE: This device meets the body worn human exposure limits found in OET Bulletin 65, 2001, and ANSI/ IEEE C95.1, 1992. Proper operation of this equipment according to the instructions found in this guide will result in exposure substantially below the FCCs recommended limits. To comply with the FCC and ANSI C95.1 RF exposure limits, this device has been tested for compliance with FCC RF Exposure limits in the typical configuration. The radiated output power of this wireless device is far below the FCC radio frequency exposure limits. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RSS 210 Warning Statement: The installer of this equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Heath Canadas Web site www.hcsc.gc.ca/rpb. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Section 8.4 of RSS-GEN Page 20 of 22 This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustrie Canada. Son utilisation est soumise aux conditions suivantes : 1) cet appareil ne doit pas causer de brouillage, et 2) doit accepter tout brouillage, y compris le brouillage pouvant entraner un fonctionnement indsirable. Section 8.3 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio ne peut fonctionner quau moyen dune antenne dun seul type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique pour les autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas celle requise pour tablir une communication satisfaisante. THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Declaration of Conformity TASER International declares that this Axon system is in compliance with the requirements and other relevant provisions of the RTT&E Directive 1999/5/EC regarding radio and telecommunications equipment and the Directive 2014/30/EU regarding electromagnetic compatibility. A copy of the original Declaration of Conformity can be found at www.taser.com. Page 21 of 22 Product functions and specifications may change without notice and the actual product may vary from the illustrations in this manual. Bluetooth is a trademark of the Bluetooth SIG, Torx is a trademark of Acumen Global Technologies, and Windows is a trademark of Microsoft Corporation.

, AXON, Axon, Axon Dock, Axon Fleet, Axon RapidLock, Axon Signal, Axon View, Evidence.com, Evidence Sync, TASER, and are trademarks of TASER International, Inc., some of which are registered in the US and other countries. For more information, visit www.taser.com/legal. All rights reserved. 2016 TASER International, Inc. MMU00## Rev: X1 Page 22 of 22

Model T00064 IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.TASER.com MMU0057 Rev: C TASER Axon Body 2 CameraUser Manual 1 1 1 1 2 4 4 5 6 6 6 7 7 7 8 8 8 8 9 9 10 11 11 11 11 12 12 12 Chapter 1: Introduction What Is the Axon Body 2 Camera System?

Important Safety and Health Information Additional Reading Chapter 2: Getting to Know Your Axon Body 2 Camera Accessories Parts Assembly and Use Chapter 3: Recording with the Axon Body 2 Camera Operating Modes BUFFERING Mode (Turning on the Camera) EVENT Mode (Starting Recording) Muting Audio Recording Adding Markers to Recorded Video Battery Status Configuring Your Axon Camera Adjusting the Audio Prompt Volume Turning off the Camera LEDs (Stealth Mode) Using Axon View Pairing Your Axon Body 2 Camera with a Smart Device Other Settings Chapter 4: Notification Reference Tables Audio Prompts LED Status Operation LED Function LED Battery LED Upload Status LED i Contents 13 14 14 14 15 16 16 16 16 16 18 Chapter 5: Axon Signal Operations Chapter 6: Care and Maintenance Cleaning the Axon Body 2 Camera Charging the Battery Replacing the Battery Chapter 7: Troubleshooting Customer Service Warranty Policy Warnings Radio Waves Declaration of Conformity ii TASER Axon Body 2 Camera User Manual Chapter 1: Introduction What Is the Axon Body 2 Camera System?

The Axon Body 2 is a camera system incorporating an audio and video recording device. This camera is designed for use in tough environmental conditions encountered in law enforcement, corrections, military, and security activities. The Axon Body 2 camera is designed to record events for secure storage, retrieval, and analysis via Evi-

dence.com services. The recorded events are transferred to your storage solution via the Axon Dock, or by using Evidence Sync software installed on a Windows computer. The Axon Body 2 camera has two operating modes designed to accommodate the needs of law enforcement, corrections, security, and the military. The default mode, or BUFFERING mode, provides pre-event buffering to capture activities that occur prior to the user activating the EVENT mode. In addition, the Axon View application enables playback of footage on a smart device for review prior to storing the data. Important Safety and Health Information Read, understand, and follow all warnings and instructions before using this product. The most up-to-date warnings and instructions are available at www.taser.com. Additional Reading This manual explains how to operate the Axon Body 2 camera hardware. Other manuals cover additional aspects of the Axon Body 2 system. These documents are available at www.taser.com. The Axon Academy website explains how to register for the Evidence.com website, configure settings, install Evi-

dence Sync software, assign personnel to cameras, recharge your camera, and transfer video from an Axon device to a computer. Visit academy.axon.io/. Detailed instructions for using Axon cameras and other TASER products with Evidence Sync are available in the Evidence Sync User Manual. If you have an Axon Dock, see the Axon Dock Quick Start Guide for how to transfer information and recharge your camera. 1 Chapter 2: Getting to Know Your Axon Body 2 Camera The Axon Body 2 camera includes physical controls to enable video and audio capture while providing visual, au-

dible, and vibration notifications of the Axon Body 2 cameras state of operation. top view bottom view Operation LED Function LED connection socket front view on/off switch upload status LED lens speaker dual-channel microphone on/off indicator Function button EVENT button Battery LED Battery status button Operation LED Shows the cameras current operating mode (for Battery status, see the battery LED, described below). Operating Mode Operation LED Recording Recovering interrupted video*

Buffering Booting up/powering down Error state**

* When the Function LED also is blinking red.

** When the Function LED also is solid red. Blinking Red Blinking Green Solid Red 2 Function LED Shows when certain functions are enabled. Function Enabled Function LED Mute Camera error*

Bluetooth feature is booting up Blinking blue Solid red Solid blue

* Use the power switch to turn the camera off and on. Connection Socket Enables data transfer and recharging. On/Off Switch Turns the cameras power on or off. On/Off Indicator When the cameras power is turned on, the red portion is exposed. When the camera power is turned off, the red portion is covered from view. Speaker Provides audio notifications. Function Button Used in device pairing, to mute the device, and to add markers to the video as it is recorded. EVENT Button Used to start and stop recording. (Double-press to start; hold for four seconds to stop recording.) The camera might take several additional seconds to close out of the video when it is powered off before stopping an event. Battery Status Button When pressed, the Battery button lights up the Battery LED, which momentarily indicates the remaining battery capacity only (it does not indicate the operating mode). Battery LED When lit, momentarily indicates the remaining battery capacity (it does not indicate the operating mode). Battery Status Battery capacity is 41100 percent Battery capacity is 2040 percent Battery capacity is less than 20 percent Battery LED Green Yellow Red during operation; flashing red and yellow during charging Battery is critically low Blinking red and yellow When you turn the camera on, the Operation LED turns solid red until the system is ready to use. Then the Opera-

tion LED blinks green (BUFFERING mode) and the Battery LED goes out. Dual-Channel Microphone For audio recording. Upload Status LED Indicates status when the camera is uploading data to the Evidence.com website via the Axon Dock. System Status Initial connection (momentary) In queue awaiting upload Upload Status LED Solid red (for 20 seconds or fewer) Solid yellow Chapter 2: Getting to Know Your Axon Body 2 Camera 3 TASER Axon Body 2 Camera User Manual System Status Upload Status LED Device ready (all videos uploaded successfully) and ful-

ly charged Device not assigned, agency mismatch, camera set in the offline mode, or device error Uploading data Firmware update, internal battery charging, extremely low battery, or memory full Transfer error, device re-trying to transfer Network error (no connection) Axon Dock has no communication with the camera. Contact TASER customer service. Lens The camera lens. Solid green Blinking red Blinking yellow DO NOT remove the camera from the Axon Dock Blinking red and yellow DO NOT remove the camera from the Axon Dock Blinking green and yellow Blinking red, yellow, and then green (cycling all colors) LED off Pressing buttons causes the Axon Body 2 camera to emit audio alerts (beeps) to indicate system actions. See Chap-

ter 4: Notification Reference Tables for more information. Accessories The Axon Body 2 camera is designed to work with the new Axon RapidLock mounting system. The RapidLock mounting system consists of the attachment piece (called the key) on the camera and the various mounting op-

tions including the attachment receiver (called the lock). To engage the Axon RapidLock, insert the key of the camera into the lock of the mount and turn it 90 degrees counterclockwise (when you are looking straight at the mount). To release the camera from the mount, turn the camera 90 degrees clockwise. The various mounts that use this system can be used with a wide variety uniforms, and holds the camera to your shirt, patrol vest, jacket, or belt. Parts back lock camera Chapter 2: Getting to Know Your Axon Body 2 Camera 4 TASER Axon Body 2 Camera User Manual Assembly and Use Read Important Safety and Health Information (Chapter 1) before performing these steps. 1 2 Insert the key on the back of the Axon Body 2 camera into the lock. Twist the RapidLock mount counterclockwise, 90 degrees. 3 Place the magnetic back underneath the shirt, patrol vest, or whatever you are using. 4 Hold the back in place, and place the RapidLock mount over the back. Magnetic attraction will hold the camera in place. 1 3 2 4 When you are wearing the camera, you can use the Axon View applications live streaming feature to determine whether your camera is capturing the view you intended. Chapter 2: Getting to Know Your Axon Body 2 Camera 5 TASER Axon Body 2 Camera User Manual Chapter 3: Recording with the Axon Body 2 Camera Operating Modes The Axon Body 2 camera has two operating modes:

1 BUFFERING (turning on the camera and starting pre-event buffering) 2 EVENT (event recording) BUFFERING Mode (Turning on the Camera) 1 Move the ON/OFF switch on the camera to the ON position. With the camera turned on, the Axon system is in the BUFFERING mode. When BUFFERING begins:

The Operation LED on the camera will blink green. The camera will be capturing video but no audio, and will not record to permanent memory while in BUFFER-

ING mode. Buffered video duration is 30 seconds by default (00:00:30). When you activate the EVENT mode, the buffered video (not audio) captured directly before the event, up to 30 seconds, will be saved and attached to the event in permanent memory. This feature is intended to capture the video of an incident just before your activation of EVENT mode. With default settings, the system does not capture audio in BUFFERING mode, so anything recorded in that mode will be video-only. Buffering mode starts only after the Axon Body 2 camera is turned on. The system does not record when the camera is turned off. 6 Notes:

An agency can turn off the BUFFERING mode. If your agency has deactivated the BUFFERING mode, your Axon system will operate the same way as described in this manual, but the camera will not record anything until you double-press the EVENT button. An agency can extend the BUFFERING modes duration to two minutes total (00:02:00). An agency can configure the BUFFERING mode so it records sound as well as video. EVENT Mode (Starting Recording) 1 When you need to record, quickly double-press the EVENT button on the camera. The system now records audio as well as video. The buffered video directly preceding the event will be saved and attached to the event recording. (Remember, with default settings, the buffered video will not contain audio.) The moment you double-press the EVENT button, both video and audio will be recorded from the camera and GPS coordinates (if the system is paired to a GPS-capable smart phone) will be record-

ed. This will continue throughout the duration of the recording until you terminate the recording. The camera provides you with indications that it is recording in EVENT mode:

At the start of an event and every two minutes during an event, the system will beep twice. The Operation LED on top of the camera will blink red. 2 3 To stop recording and return to BUFFERING mode, press and hold the EVENT button for approximately four seconds. The system will beep once (with a long tone). To end a recording and turn off the system, move the on/off switch to the off position. When you end a recording with the on/off switch you will not go into BUFFERING mode; instead the system will turn off completely. Note: An event not recorded by the camera cannot be played back or downloaded to your computer. Muting Audio Recording If your system administrator has configured your Axon system to do so, you can use the function button to disable audio recording during an event. This feature may be useful in sensitive situations. 1 Press and hold the Function button for three seconds to mute the audio capture. The function LED will flash blue while the camera is muted. 2 Press and hold the Function button another three seconds to re-enable the audio recording. Adding Markers to Recorded Video The Function button also can be used to add a marker to recorded video that will show when the video is replayed on Evidence.com and documented in the audit trail for the device. Markers are most useful for documenting a mo-

ment that you will want to jump to quickly at a later time when re playing the video. If you want to add a marker to a video while you are recording:

Press and release the Function button within one second. Chapter 3: Recording with the Axon Body 2 Camera 7 TASER Axon Body 2 Camera User Manual Battery Status Press the Battery button to determine the percentage remaining in the battery. See Chapter 2: Getting to Know Your Axon Body 2 Camera for details on the Battery LED functions. Configuring Your Axon Camera Adjusting the Audio Prompt Volume 1 Connect the Axon Body 2 camera to the Evidence Sync application. 2 3 Select the device settings. Select the desired volume settings for the audio beeps recorded by the device. The volume has four settings. At each level, the camera beeps, providing you with a sample of the volume:

Low Medium High Off Turning off the Camera LEDs (Stealth Mode) For some situations, you may wish to turn off the lights on your camera. You can turn off the lights through the Evidence Sync software or by using the Battery button. To turn the lights off using the Battery button:

Press and hold the Battery button for 10 seconds. To turn the lights back on:

Press and hold the Battery button for 10 seconds. To use Evidence Sync:

1 Connect the Axon Body 2 camera to the Evidence Sync application. 2 3 Select the device settings. Select the option to turn off the device LEDs. The Operation LED flashes red, yellow, and then green before shutting down the lights. Pressing the Battery button will momentarily light both the Operation LED and the Battery LED, dis-

playing the current operating mode and battery level. For interpreting the LED colors, see Chapter 2:

Getting to Know Your Axon Body 2 Camera. To turn the lights back on:

1 Connect the Axon Body 2 camera to the Evidence Sync application. 2 3 Select the device settings. Select the option to turn on the device LEDs. Chapter 3: Recording with the Axon Body 2 Camera 8 TASER Axon Body 2 Camera User Manual Using Axon View The Axon View application enables you to replay video and add metadata (GPS, title, case ID, and category) to your videos using a smart phone or multimedia player. 1 Using your smart device, download the Axon View application from the Google Play store or the iTunes App Store. 2 Search Axon View. 3 On your smart device, open the Axon View application and follow the onscreen instructions. Pairing Your Axon Body 2 Camera with a Smart Device Note: The Axon Body 2 camera is shipped with pairing enabled, but your administrator can turn the feature off. 1 Turn on the Axon Body 2 camera. 2 Hold down the Function and EVENT buttons for five seconds. 3 Wait until you hear four beeps. The Function LED will blink green. Chapter 3: Recording with the Axon Body 2 Camera 9 TASER Axon Body 2 Camera User Manual 4 On your smart device, follow the onscreen instructions. Other Settings Your organizations administrator can further configure your Axon Body 2 system with these features:

Pre-event buffer of up to two minutes Axon Signal-enabled Bluetooth wireless technology Wi-Fi to pair your Axon Body 2 camera to the Axon View application Haptic (status notification via device vibration) Video quality Chapter 3: Recording with the Axon Body 2 Camera 10 TASER Axon Body 2 Camera User Manual Chapter 4: Notification Reference Tables Audio Prompts The Axon Body 2 camera emits beeping sounds called audio prompts to notify you of the system status. These audio prompts usually occur after you perform an action with the body camera. These audio prompts are accom-

panied by a vibration that matches the beeps. Operating Mode Audio Notification Haptic Notification (Vibration) Powering on or off Recording an event One beep Once Two beeps (every two minutes) Twice (every two minutes) Press the Battery button while the camera is recording Two beeps The device is ending an event and re-

turning to BUFFERING mode One long beep None Once, long-duration The battery is at 20 percent capacity or lower The camera memory is full Four quick beeps (every five minutes) Four times, quickly, every five minutes Three beeps. The camera will not start recording. Three times LED Status Operation LED Operating Mode Operation LED Recording Recovering interrupted video*

Buffering Booting up/powering down Error state**

* When the Function LED also is blinking red.

** When the Function LED also is solid red. Blinking Red Blinking Green Solid Red 11 Function LED Function Enabled Function LED Mute (no audio capture) Camera error*

Bluetooth feature is booting up

* Use the power switch to turn the camera off and on. Battery LED Battery Status Battery capacity is 41100 percent Battery capacity is 2040 percent Battery capacity is less than 20 percent Battery is critically low Upload Status LED System Status Initial connection (momentary) In queue awaiting upload Device ready (all videos uploaded successfully) and ful-

ly charged Device not assigned, agency mismatch, camera set in the offline mode, or device error Uploading data Firmware update, internal battery charging, extremely low battery, or memory full Transfer error, device re-trying to transfer Network error (no connection) Axon Dock has no communication with the camera. Contact TASER customer service. Blinking blue Solid red Solid blue Green Yellow Battery LED Red during operation; flashing red and yellow during charging Blinking red and yellow LED Indication Solid red (for 20 seconds or fewer) Solid yellow Solid green Blinking red Blinking yellow DO NOT remove the camera from the Axon Dock Blinking red and yellow DO NOT remove the camera from the Axon Dock Blinking green and yellow Blinking red, yellow, and then green (cycling all colors) LED off Chapter 4: Notification Reference Tables 12 TASER Axon Body 2 Camera User Manual Chapter 5: Axon Signal Operations Axon Signal technology is included with the Axon Body 2 camera. However, your agencys administrator must have activated the Axon Signal capability for it to work. When it is active, Axon Signal technology takes your Axon Body 2 camera from BUFFERING to EVENT mode auto-

matically. Emergency vehicles can be equipped with an Axon Signal Unit (ASU). With light bar activation, or other activation triggers, the ASU sends a signal to your Axon Body 2 camera. Upon processing this signal, your Axon camera tran-

sitions from BUFFERING to EVENT mode. When your camera starts recording, you will hear two beeps. The ASU has a range of approximately 30 feet (9.1 meters). Another vehicles light bar activation may cause your Axon camera to start recording if the light bar is equipped to do so. The ASU can only send a signal to tell the camera to start recording. Axon Signal technology does not end record-

ing. If a light bar is turned off, the camera will continue to record. The ASU cannot turn an Axon system on. If the Axon Body 2 camera is turned off, the camera will not record even if an ASU sends an activation signal. The ASU is purchased separately from the Axon Body 2 camera. 13 Chapter 6: Care and Maintenance Cleaning the Axon Body 2 Camera Use a soft, damp cloth to clean the surface of the Axon Body 2 camera. Do not use harsh cleaners or solvents. Do not immerse the Axon Body 2 camera in water or cleaning solutions. If the Axon Body 2 camera lens becomes dirty, use a lens blower brush to clean it and then wipe it with a soft cloth if necessary. You may moisten the cloth with isopropyl alcohol. Do not use ammonia-based or similar type window cleaners on the camera lens. Do not place the lens under running water or apply jets of water to the camera lens. Charging the Battery A fully charged camera battery should provide enough power for approximately 12 hours of normal operation. Recharging a battery after a 12-hour use can take up to six hours if you are recharging your Axon Body 2 camera from a wall outlet or Axon Dock. Recharging could take considerably longer if you are recharging from a computer. If the battery depletes significantly during use, you will hear four quick tones repeating every five minutes. This message indicates that less than approximately 20 percent of the battery capacity remains. Always recharge a depleted battery as soon as reasonably possible. You can use an Axon Dock, wall charger, or computer to charge the battery. Using a non-TASER approved wall charger may degrade device performance and will void the warranty. If the Axon Body 2 camera is to be stored for a long time, the Battery LED should be yellow when you put the camera in storage. After an Axon Body 2 camera has been stored six months, the camera should be run until the battery is depleted and then the battery should be recharged. 14 Replacing the Battery Replacement batteries are combined with the back portion of an Axon Body 2 camera. Replacing a battery in-

volves removing the back of the camera and installing a new camera back. 1 Turn the Axon Body 2 camera off. 2 Using a Torx T6 screwdriver, remove the screws from the Axon Body 2 camera. 3 Remove the back of the camera. 4 Put the new camera back in place with the camera front. 5 Using a Torx T6 screwdriver, fasten the screws into the new camera back. Do not over-tighten. Chapter 6: Care and Maintenance 15 TASER Axon Body 2 Camera User Manual Chapter 7: Troubleshooting If you experience difficulty with your Axon Body 2 camera, first power the device down, and start it again. If experiencing difficulty with the Axon View application, power down the mobile device, turn the device back on, and re-pair your smart device with the Axon Body 2 camera. Customer Service Visit www.taser.com and view the Support options, or call 1-800-978-2737. Warranty Policy TASER International warranty provisions are applicable on all Axon Body 2 system products. See TASER Interna-

tionals website, www.taser.com, for detailed warranty information. Warnings For a full list of the warning associated with this product, see www.taser.com. Radio Waves Changes or modifications to the equipment not expressly approved by the manufacturer could void the product warranty and the users authority to operate the equipment. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emis-

sion limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. Before a de-

vice model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the governmentadopted requirement for safe exposure. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with 16 the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult TASER International Customer Service for help. FCC/IC NOTICE: This device meets the body worn human exposure limits found in OET Bulletin 65, 2001, and ANSI/

IEEE C95.1, 1992. Proper operation of this equipment according to the instructions found in this guide will result in exposure substantially below the FCCs recommended limits. To comply with the FCC and ANSI C95.1 RF exposure limits, this device has been tested for compliance with FCC RF Exposure limits in the typical configuration. The radiated output power of this wireless device is far below the FCC radio frequency exposure limits. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RSS 210 Warning Statement: The installer of this equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Heath Canadas Web site www.hcsc.gc.ca/rpb. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ-

ing interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Section 7.1.3 of RSS-GEN This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, includ-

ing interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustrie Canada. Son utilisation est soumise aux conditions suivantes : 1) cet appareil ne doit pas causer de brouillage, et 2) doit accepter tout brouillage, y compris le brouillage pouvant entraner un fonctionnement indsirable. Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and max-

imum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio ne peut fonctionner quau moy-

en dune antenne dun seul type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Can-

Chapter 7: Troubleshooting 17 TASER Axon Body 2 Camera User Manual ada. Dans le but de rduire les risques de brouillage radiolectrique pour les autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas celle requise pour tablir une communication satisfaisante. THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Declaration of Conformity TASER International declares that this Axon system is in compliance with the requirements and other relevant provisions of the RTT&E Directive 1999/5/EC regarding radio and telecommunications equipment and the Directive 2014/30/EU regarding electromagnetic compatibility. A copy of the original Declaration of Conformity can be found at www.taser.com. Chapter 7: Troubleshooting 18 TASER Axon Body 2 Camera User Manual Product functions and specifications may change without notice and the actual product may vary from the illustrations in this manual. Android is a trademark of Google, Inc., Bluetooth is a trademark of Bluetooth SIG, Google Play is a trademark of Google, Inc., IOS is a trademark of Cisco Technology, Inc., iTunes is a trademark of Apple, Inc., Torx is a trademark of Acumen Global Technologies, Wi-Fi is a trademark of the Wi-Fi Alliance, and Windows is a trademark of Microsoft Corporation.

, AXON, Axon, Axon Body 2, Axon Dock, Axon RapidLock, Axon Signal, Axon View, Evidence.com, Evidence Sync, TASER, and are trademarks of TASER International, Inc., some of which are registered in the US and other countries. For more information, visit www.taser.com/legal. All rights reserved. 2016 TASER International, Inc. MMU0057 Rev: C

Date: 18-May-2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 Subject: Requesting Class II Permissive Change FCC ID: X4GS00947 The purpose of this letter is to request a Class II Permissive Change for FCC ID: X4GS00947, Original Grant Date: 01/29/2016. Applicant: Axon Enterprise, Inc. The changes filed under this request are:

1. U-NII 1 Band has been enabled. Sincerely,