FCC ID: X4GS00947C In-car Camera System

Axon Fleet 2 Camera System User Manual Document Revision: C January 2019 Axon Fleet 2 Camera System User Manual Apple, iOS, and Safari are trademarks of Apple, Inc. registered in the US and other countries. Firefox is a trademark of The Mozilla Foundation registered in the US and other countries. Google, Google Play, Android, and Chrome are trademarks of Google, Inc. Microsoft, Azure, Windows, Internet Explorer, and Excel are trademarks of Microsoft Corporation registered in the US and other countries. Javascript is a trademark of Oracle America, Inc. registered in the US and other countries.

, Axon, Axon Fleet 2, Axon Evidence, Axon Signal, Axon View XL, and Evidence Sync are trademarks of Axon Enterprise, Inc., some of which are registered in the US and other countries. For more information, visit www.axon.com/legal. All rights reserved. 2019 Axon Enterprise, Inc. Axon Enterprise, Inc. Page 2 of 24 Axon Fleet 2 Camera System User Manual Table of Contents Introduction................................................................................................................................................. 5 Maximum Video Length .................................................................................................................... 5 Additional Reading ..................................................................................................................................... 5 Getting to Know Your Axon Fleet 2 Camera System ............................................................................... 7 Axon Fleet 2 Front Camera Hardware ..................................................................................................... 7 Axon Fleet Rear Camera Hardware ....................................................................................................... 10 Axon Fleet Power Unit ............................................................................................................................. 12 Recording with the Axon Fleet 2 System ................................................................................................ 13 Operating Modes ..................................................................................................................................... 13 BUFFERING Mode (Turning on the Camera) ................................................................................ 13 EVENT Mode (Starting Recording) .................................................................................................. 14 Muting Audio Recording .......................................................................................................................... 15 Adding Markers while Recording ........................................................................................................... 15 Zoom Function.......................................................................................................................................... 15 Front Camera Pan and Tilt ...................................................................................................................... 17 Axon Signal ................................................................................................................................................ 17 Notification Reference Tables ................................................................................................................. 18 Audio Prompts .......................................................................................................................................... 18 LED Status ................................................................................................................................................. 18 Operation LED .................................................................................................................................. 18 Function LED ..................................................................................................................................... 18 Rear Camera Controller Ring LED .................................................................................................. 19 Uploading Video from the Axon Fleet 2 System .................................................................................... 19 Wireless via LTE ........................................................................................................................................ 19 Wireless at Station ................................................................................................................................... 19 USB Cable using Evidence Sync .............................................................................................................. 19 Troubleshooting and Other Information ............................................................................................... 21 Axon Enterprise, Inc. Page 3 of 24 Axon Fleet 2 Camera System User Manual Technical Support .................................................................................................................................... 21 Warranty Policy......................................................................................................................................... 21 Declaration of Conformity ...................................................................................................................... 21 Warnings ................................................................................................................................................... 21 Compliance Marks ................................................................................................................................... 22 Radio Waves .............................................................................................................................................. 22 Axon Enterprise, Inc. Page 4 of 24 Axon Fleet 2 Camera System User Manual Introduction The Axon Fleet 2 solution is a camera system incorporating an audio and video recording device. This camera is designed for use in tough environmental conditions encountered in law enforcement, corrections, military, and security activities. The Axon Fleet 2 system is designed to record events for secure storage, retrieval, and analysis using Axon Evidence

(Evidence.com) services. The recorded events can be transferred wirelessly to the Axon Evidence website through Wi-Fi technology. You also can transfer information by using Evidence Sync software installed on a Windows computer. The Axon Fleet 2 system usually consists of 2 cameras: one installed in the front of the vehicle in a windshield mount, and the second pointed at the law enforcement vehicles prisoner compartment. The Axon Fleet 2 system cameras have 2 operating modes designed to accommodate the needs of law enforcement, corrections, security, and the military. The default mode, or BUFFERING mode, which provides pre-event buffering to capture activities that occur prior to activating cameras, and EVENT mode, which records events. If the Axon Fleet 2 system is used in an emergency vehicle equipped with an Axon Signal Vehicle unit, the camera will transition from BUFFERING to EVENT mode when an appropriate event occurs (such as your emergency vehicles light bar being activated). The camera is normally powered by the vehicle. If the vehicles ignition is shut off, an inline Axon Fleet power unit provides power for up to 4 hours of recording. Maximum Video Length The maximum length of an Axon camera recording is 4 hours. In situations where an Axon camera is in Event mode for more than 4 hours, the current video recording stops at 4 hours and a new video recording will start. Additional Reading This manual explains how to operate the Axon Fleet 2 camera hardware. Other manuals cover additional aspects of the Axon Fleet system. These documents and additional information are available at www.help.axon.com. The Axon View XL Manual provides instructions for using your mobile data terminal (MDT) with your Axon Fleet system. Axon Enterprise, Inc. Page 5 of 24 Axon Fleet 2 Camera System User Manual For information on managing users, managing vehicles, managing Fleet camera settings, and working with videos, see the Axon Evidence (Evidence.com) User and Administrator Reference Guide. Detailed instructions for using Axon Fleet 2 cameras and other Axon products with Evidence Sync are available in the Evidence Sync User Manual. For information on the optional Axon Fleet 2 Wireless Microphone, see the Axon Fleet 2 Wireless Microphone Installation and User Manual. The Axon Academy website explains how to register for the Axon Evidence website, configure settings, assign personnel to cameras, and transfer video from an Axon device to a computer. Visit academy.axon.com. Axon Enterprise, Inc. Page 6 of 24 Axon Fleet 2 Camera System User Manual Getting to Know Your Axon Fleet 2 Camera System Although your Axon Fleet system can be configured for automated transfer from BUFFERING to EVENT mode under the right conditions, both the front and rear cameras still include physical controls to enable video and audio recording. The cameras also provide visual and audible notification of the Axon Fleet systems state of operation. Note: Many of the features activated by the buttons below also can be activated with the Axon View XL program. See the Axon View XL Manual for more information. Axon Fleet 2 Front Camera Hardware The following images show the different components on the Axon Fleet 2 front camera, Model AX1014. Power cable Swivel ball joint Operation indicator Lens Axon Fleet 2 Front Camera front Swivel ball joint Attaches camera to camera mount Power cable Provides power from Axon Fleet Power Unit Lens The camera lens. Operation indicator Shows camera operation. Blinking green = BUFFERING mode, blinking red = EVENT (recording) mode Axon Enterprise, Inc. Page 7 of 24 Axon Fleet 2 Camera System User Manual Function LED Operation LED Dataport Power switch Axon Fleet 2 Front Camera back Function LED Shows camera functions that are enabled. Function Enabled Mute Camera error*

Bluetooth feature is booting up Camera is searching for Wi-Fi Camera connected to Wi-Fi Function LED Blinking blue Solid red Solid blue Blinking magenta Solid magenta

* Use the power switch to turn the camera OFF and ON. Operation LED Shows the cameras current operating mode. When you turn the camera ON, the Operation LED turns solid red until the system is ready to use. Then the Operation LED blinks green (BUFFERING mode) and the Battery LED goes out. Operating Mode Recording Buffering Booting up/powering down Operation LED Blinking red Blinking green Solid red Dataport Used for data transfer through PC when using Evidence Sync Power switch Turns the cameras power ON or OFF. When the cameras power is turned ON, the red portion is exposed. When the camera power is turned OFF, the red portion is covered from view. The camera might take several additional seconds to close out of the video when it is powered OFF before stopping an event. Axon Enterprise, Inc. Page 8 of 24 Axon Fleet 2 Camera System User Manual Speaker EVENT button Axon Fleet 2 Front Camera bottom EVENT button Used to start and stop recording. Press once to start. Press once again to stop. Speaker Provides audio notifications. Windshield mount Thumbscrew Sunshield Microphone

(under sunshield) Function Button Axon Fleet 2 Front Camera with windshield mount Windshield mount Attaches to the vehicles windshield. Thumbscrew Loosen the thumbscrew to pan and tilt the camera, and then tighten to fix camera in place. Failure to loosen the thumbscrew prior to tilting or panning the camera may damage the camera swivel ball joint or camera housing. Axon Enterprise, Inc. Page 9 of 24 Axon Fleet 2 Camera System User Manual Sunshield Used to reduce glare on camera lens. Function button Used to mute the device and to add markers to the video as it is recorded. Microphone For recording in-cabin audio. Located under the sunshield. Axon Fleet Rear Camera Hardware The following images show the different components on the Axon Fleet 2 rear camera, Model AX1015, and rear camera controller, Model AX1016. Microphone

(on back of camera) Angle adjustment screws Camera cable Camera mount IR illumination window Lens Ambient light sensor Axon Fleet 2 rear camera and mount Lens The camera lens. Camera mount Attaches camera to the vehicle. Ambient light sensor Engages infra-red (IR) illumination at low ambient light. IR illumination window Infra-red (IR) illumination source. Camera cable Connects the camera to the camera controller. Angle adjustment screws Allows tilting the camera and then fixing camera in place. Microphone For recording in-cabin audio. Located on the back of the rear camera. Axon Enterprise, Inc. Page 10 of 24 Axon Fleet 2 Camera System User Manual Camera cable Function LED Power switch Speaker EVENT Button Ring LED Operation LED Function button Controller mount Camera controller Axon Fleet 2 rear camera controller and mount Camera cable Connects the camera to the camera controller. Camera controller The Axon Fleet 2 rear camera controller includes physical controls to enable video and audio capture while providing visual and audible notifications of the cameras state of operation. Controller mount Used to mount the camera controller to the vehicle and provides power to the controller and rear camera. Function LED Shows camera functions that are enabled. Function Enabled Mute Camera error*

Bluetooth feature is booting up Camera is searching for Wi-Fi Camera connected to Wi-Fi Function LED Blinking blue Solid red Solid blue Blinking magenta Solid magenta

* Use the power switch to turn the camera OFF and ON. Axon Enterprise, Inc. Page 11 of 24 Axon Fleet 2 Camera System User Manual Operation LED Shows the cameras current operating mode. When you turn the camera ON, the Operation LED turns solid red until the system is ready to use. Then the Operation LED blinks green (BUFFERING mode) and the Battery LED goes out. Operating Mode Recording Buffering Booting up/powering down Operation LED Blinking red Blinking green Solid red Power switch Turns the cameras power ON or OFF. When the cameras power is turned ON, the red portion is exposed. When the camera power is turned OFF, the red portion is covered from view. The camera might take several additional seconds to close out of the video when it is powered OFF before stopping an event. EVENT button Used to start and stop recording. Press once to start. Press once again to stop. Ring LED The LED around the rear camera controller EVENT button. The Ring LED blinks red and yellow to indicate the rear camera controller is receiving a firmware update. Speaker Provides audio notifications. Function button Used to mute the device and to add markers to the video as it is recorded. Axon Fleet Power Unit The Axon Fleet system uses the vehicles electrical system as a power source. If the vehicles ignition is shut off, the battery in the Axon Fleet power unit supplies power to the camera so it can keep recording. With a fully charged power unit battery, the camera can record up to 4 hours without the engine running. The battery will begin recharging when the engine is turned back on. It may take over 3 hours for a depleted battery to fully recharge. Axon Enterprise, Inc. Page 12 of 24 Axon Fleet 2 Camera System User Manual Recording with the Axon Fleet 2 System The Axon Fleet 2 front and rear cameras can operate independently of each other. Operating Modes The Axon Fleet 2 camera system has 2 operating modes:

1. BUFFERING (turning on the camera and starting pre-event buffering) 2. EVENT (event recording) BUFFERING Mode (Turning on the Camera) Move the power switch on the camera to the ON position. With the camera turned on, the Axon system is in the BUFFERING mode. When BUFFERING begins:

The Operation LED on the back of the camera will blink green. The camera will be capturing video but does not record to permanent memory while in BUFFERING mode. Buffered video duration is 30 seconds by default (00:00:30). When EVENT mode is activated, the buffered video captured directly before the event is saved and attached to the event in permanent memory. This feature is intended to capture the video of an incident just before your activation of EVENT mode. With default settings, the system does not capture audio in BUFFERING mode, so anything recorded in that mode will be video-only. BUFFERING mode starts only after the Axon Fleet system is turned on. The system does not record when the camera is turned off. Notes:

An agency can disable pre-event BUFFERING. An agency can configure the BUFFERING mode so it records audio as well as video. Axon Enterprise, Inc. Page 13 of 24 Axon Fleet 2 Camera System User Manual EVENT Mode (Starting Recording) To begin recording, do one of the following:

Use the Axon View XL application to start recording. Press the EVENT button on the camera/controller. If your vehicle has an Axon Signal Vehicle unit, your camera will transition from BUFFERING to EVENT mode when the Axon Signal Vehicle unit sends a signal. When your camera starts recording, you will hear 2 beeps. The system now records audio as well as video. The buffered video directly preceding the event is saved and attached to the event recording (Note: With default settings, the buffered video does not contain audio). The moment EVENT mode begins, both video and audio are recorded from the camera and GPS coordinates are recorded (Note: GPS coordinates are provided by the router). This will continue throughout the duration of the recording until you stop the recording. The camera provides you with indications that it is recording in EVENT mode:

At the start of an event and every 2 minutes during an event, the system beeps twice. The Operation LED on the camera or controller blinks red. 1. To stop recording and return to BUFFERING mode:

Use the Axon View XL application to stop recording, or Press the EVENT button. The system will beep once (with a long tone). 2. To turn off the system, move the power switch to the OFF position. When you end a recording with the power switch you will not go into BUFFERING mode; instead the system will turn off completely. Note: An event not recorded by the camera cannot be played back or downloaded to your computer. Axon Enterprise, Inc. Page 14 of 24 Axon Fleet 2 Camera System User Manual Muting Audio Recording You can use the function button to disable audio recording during an event if your administrator has configured your Axon Fleet 2 system to do so. This feature may be useful in sensitive situations. You can also use the View XL audio controls to mute and enable audio recordings. 1. Press and hold the Function button on the camera/controller for 3 seconds to mute the audio recording. The camera will beep twice and the Function LED will blink blue while the camera is muted. 2. Press and hold the Function button on the camera/controller another 3 seconds to re-

enable the audio recording. Adding Markers while Recording The Function button can be used to add a marker while recording video. The marker is shown when the video is replayed in Axon Evidence and documented in the audit trail. Markers are useful for indicating an important event that you want to easily find when replaying the video. To add a marker to a video while you are recording:

Press and release the Function button within 1 second. Zoom Function The Axon Fleet 2 Front Camera is equipped with a zoom function. This function allows you to magnify the image shown while using Live View. The zoom function works in both BUFFERING and EVENT modes. 1. In the View XL Control tab, tap Live View. 2. On the Live View, check that the Front camera is selected. Axon Enterprise, Inc. Page 15 of 24 Axon Fleet 2 Camera System User Manual 3. Tap anywhere on the screen to magnify that area by 2x. Tap on the screen again to magnify that area by 4x. Tap on the screen to magnify Example 2x view Example 4x view Magnification returns to normal view 10 seconds after the last screen tap. If you exit Live View and return within 10 seconds, the image will still be magnified. Tap Hold to maintain the current zoom and stop the 10 second countdown. If Hold is used during recording, magnification returns to normal when the recording is stopped. 4. Tap Close to return to the Control tab. Axon Enterprise, Inc. Page 16 of 24 Axon Fleet 2 Camera System User Manual Front Camera Pan and Tilt The Axon Fleet 2 front camera is mounted on a swivel-ball joint that allows the camera to be panned and tilted to ensure objects of interest are within the cameras field of view. Loosen the thumbscrew on the front camera window mount to pan and tilt the camera, and then tighten the thumbscrew to fix the camera in place. You can use Axon View XL Live View to assist with adjusting the camera view. IMPORTANT: Failure to loosen the thumbscrew prior to tilting or panning the camera may damage the camera swivel ball joint or camera housing. Axon Signal Axon Signal technology is included with the Axon Fleet system. However, your agencys Axon Evidence administrator must activate the Axon Signal capability for it to work. When it is active, Axon Signal technology can take your Axon Fleet system from BUFFERING to EVENT mode. Emergency vehicles can be equipped with an Axon Signal Vehicle unit. When triggered, such as by a light bar activation, the Axon Signal Vehicle unit sends a signal to your Axon Fleet system. Upon receiving this signal, your Axon cameras transition from BUFFERING to EVENT mode. When your camera starts recording, you will hear 2 beeps. The Axon Signal Vehicle unit has a range of approximately 30 feet (9.1 meters). Axon Signal technology can only send a signal to tell the camera to start recording. Axon Signal technology does not end recording. for example, if a light bar is turned off, the camera will continue to record until the user stops the recording. The Axon Signal technology cannot turn an Axon system on. If the Axon Fleet system is turned off, the camera will not record even if an Axon Signal Vehicle unit sends a trigger signal. Axon Enterprise, Inc. Page 17 of 24 Axon Fleet 2 Camera System User Manual Notification Reference Tables Audio Prompts The Axon Fleet system emits beeping sounds called audio prompts to notify you of the system status. These audio prompts usually occur after a camera action. Operating Mode Powering on or off Recording an event Enter or exit Mute mode The device is ending an event and returning to BUFFERING mode Audio Notification One beep Two beeps (repeats every 2 minutes) Two beeps One long beep The camera is running off the Axon Fleer power unit (the car ignition is off) and the battery is at 20% capacity or lower. Four quick beeps (every 5 minutes) The camera memory is full (the camera will not start recording). Three beeps. LED Status Operation LED The operation LED displays the systems current operating mode. Operating Mode Recording Buffering Booting up/powering down Function LED Operation LED Blinking red Blinking green Solid red The function LED displays when certain functions are enabled:

Function Enabled Mute Camera error*

Bluetooth feature is booting up Camera is searching for Wi-Fi Camera connected to Wi-Fi Function LED Blinking blue Solid red Solid blue Blinking magenta Solid magenta

* Use the power switch to turn the camera OFF and ON. Axon Enterprise, Inc. Page 18 of 24 Axon Fleet 2 Camera System User Manual Rear Camera Controller Ring LED The Ring LED blinks red and yellow to indicate the rear camera controller is receiving a firmware update. Uploading Video from the Axon Fleet 2 System The Axon Fleet system can support the multiple offload options listed below:

Wireless via LTE The Axon Fleet system can upload video via Long Term Evolution (LTE), a fast-wireless service, if the vehicle has an in-car router that supports LTE. For more information, see the Axon View XL Manual. Wireless at Station An agency can equip its parking facilities with wireless access points so that vehicles equipped with Axon Fleet systems can upload their videos. For more information, see the Axon View XL Manual. Note: There might be additional system requirements associated with Wi-Fi offload. USB Cable using Evidence Sync If Evidence Sync software is installed on your computer, you can download information from an Axon Fleet 2 camera to your computer and then upload it to the Axon Evidence website. In order to use Evidence Sync with your Axon Fleet 2 cameras, you must separately order 2.5mm to USB cable and USB C to USB A cable from Axon. The 2.5mm to USB cable is used to connect the front camera dataport to the USB port of a computer with Evidence Sync. The USB-C to USB cable is used to connect the rear camera to the USB port of a computer with Evidence Sync. The rear camera cable must be disconnected from the rear camera to connect it to a computer using the USB-C to USB cable. The rear camera cable is retained by 2 T6 screws which must be removed to disconnect the cable. Axon Enterprise, Inc. Page 19 of 24 Axon Fleet 2 Camera System User Manual Alternatively, a commercially available USB-C female to USB-A male adapter can be used to connect the rear camera to the PC utilizing the rear camera cable. The rear camera cable must be disconnected from the rear camera controller and connected to the PC using this adapter. For more information on using Evidence Sync with Axon Fleet 2 Cameras, see the Evidence Sync User Manual. Axon Enterprise, Inc. Page 20 of 24 Axon Fleet 2 Camera System User Manual Troubleshooting and Other Information If you have trouble with your Axon Fleet system cameras, turn the camera off and turn it on again. If you receive camera status errors in View XL, refer to the Axon View XL Manual for troubleshooting information. If the camera is not transitioning to EVENT mode from Axon Signal Vehicle triggers, have an Axon Evidence administrator verify the Signal Configuration set up is correct in Axon Evidence. If the previous actions do not resolve the difficulties, contact Axon Customer Service for additional support. Technical Support Visit www.axon.com and view the Support options or call 1-800-978-2737. Warranty Policy Axon Enterprise warranty provisions are applicable on all Axon Fleet system products. See Axon Enterprises website, www.axon.com, for detailed warranty information. Declaration of Conformity Axon declares that this Axon system is compliant with the requirements of the Radio Equipment Directive (RED) 2014/53/EU. A copy of the original Declaration of Conformity can be found at www.axon.com. Warnings For a full list of the warning associated with this product, see www.axon.com. Axon Enterprise, Inc. Page 21 of 24 Axon Fleet 2 Camera System User Manual Compliance Marks Country of Origin: USA Radio Waves An Axon Fleet 2 system transmission is in the frequency ranges of 2402 2480 MHz, 2412 2462 MHz, and 5745 5825 MHz. Changes or modifications to the equipment not expressly approved by the manufacturer could void the product warranty and the users authority to operate the equipment. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. Before a device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Axon Enterprise, Inc. Page 22 of 24 Axon Fleet 2 Camera System User Manual Consult Axon International Technical Support for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with the IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. nonc d'exposition aux rayonnements: Cet quipement est conforme aux limites d'exposition aux rayonnements ioniques RSS-102 Pour un environnement incontrl. Cet quipement doit tre install et utilis avec un Distance minimale de 20 cm entre le radiateur et votre corps. Section 8.4 of RSS-GEN This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustrie Canada. Son utilisation est soumise aux conditions suivantes : 1) cet appareil ne doit pas causer de brouillage, et 2) doit accepter tout brouillage, y compris le brouillage pouvant entraner un fonctionnement indsirable. Section 8.3 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain Axon Enterprise, Inc. Page 23 of 24 Axon Fleet 2 Camera System User Manual should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not greater than necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio ne peut fonctionner quau moyen dune antenne dun seul type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique pour les autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas celle requise pour tablir une communication satisfaisante. THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES Section 6.8 of RSS-GEN These radio transmitters IC: 8803A-S00947B and IC: 8803A-S00146B have been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Axon Fleet 2.0 Front camera uses a stamped metal dual band dipole. Antenna gain is <5.8dBi at 2.4GHz, and <1.88dBi at 5.8GHz. The required impedance for this antenna is 50 ohms. Axon Fleet 2.0 Rear camera uses a ceramic chip dual band antenna. Antenna gain is

<-4.15dBi at 2.4GHz, and <-0.3dBi at 5.8 GHz. The required impedance for this antenna is 50 ohms. Axon Enterprise, Inc. Page 24 of 24

LABEL DESIGN Product: Axon Fleet 2, Front Camera Model Number: AX1014 FCC ID: X4GS00947C IC: 8803A-S00947B MATERIAL: BASE: .002" WHITE THERMAL TRANSFER POLYESTER ON LINER. LAMINATE: 1.5MIL MATTE THERMAL TRANSFER BOPP LAMINATION. ADHESIVE: ACRYLIC (MUST OPERATE -40 C TO 60 C). Location:

Letter of Authorization and Anti- Drug Statement Applicant Name: Axon Enterprise, Inc. Address: 17800 N 85th St, Scottsdale, AZ, 85255 Product Name: Axon Fleet 2 Front Camera Model Number: AX1014 FCC ID: X4GS00947C We authorize:

CETECOM Inc., to act on our behalf on all matters concerning the above named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion;

however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Signature of Authorized Person Filing:

Title: Product Compliance Engineer Date: 02-04-2022

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 02-04-2022 Subject:

Request for Permanent Confidentiality FCC ID: X4GS00947C To Whom It May Concern:

In accordance with 0.457(d) and 0.459 of CFR 47, and KDB 726920, Axon Enterprise, Inc. hereby requests permanent confidentiality for documents filed under the following exhibit types:

1. Block Diagram 2. Schematic Diagram 3. Operational Description These items contain detailed system and equipment description and related information about the product which Axon Enterprise, Inc. considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Axon Enterprise, Inc. also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, _______________________________ Signature Name: Elisabet Dominguez Title: Product Compliance Engineer Company Name: Axon Enterprise, Inc. Address: 17800 N 85th St, Scottsdale, AZ 85255, USA