Thank you for using Aztech KylaS product! Please keep this Easy Start Guide for future use. For support or help, visit kylas.aztech.com PACKAGE CONTENTS DISCLAIMER Aztech Technologies Pte Ltd, its holding company and its associated companies
(hereinafter referred to collectively as Aztech) does not guarantee that adequate warning or protection will be given, and disclaims all warranties and representations, whether expressed, implied or otherwise statutory, concerning the product, including without limitation any warranty of merchantability or fitness for a particular purpose. Aztech shall not be liable in any event for any consequential, indirect, incidental, special, exemplary, punitive or enhanced damages resulting from the use, maintenance or operation of the product. Aztech makes no warranty or representation that the product constitutes a fire alarm system or is compliant with any requirements prescribed by any applicable state or laws, codes, regulations and/or other specifications that may be set out by relevant authorities having jurisdiction (collectively referred to as regulations). You shall be solely responsible for compliance with all regulations. To the maximum extent permitted by applicable law, you agree to hold harmless and indemnify, including legal fees, Aztech and Aztechs personnel against any third party claims or fines by authorities that arise or are alleged to have arisen as a result of negligent or intentional act or omission by you or breach by you of any the terms herein or any violation of any regulations. Zigbee Hub Micro USB Cable 1. 2. Plug in the micro USB cable to the micro USB port and power adapter. Power on the device by switching on the power supply. Easy Start Guide Warranty Card PRODUCT DESCRIPTION The Zigbee Hub works as a communication bridge between WiFi and Zigbee in the IoT ecosystem. It allows smart devices to communicate with each other for a seamless control from the app on the phone. IMPORTANT SAFETY INFORMATION Not for humid places such as bathroom and green house. Keep the product from devices with strong interference signal such as microwave oven and TV sets. Ethernet port
(for manufacturers debugging use only) Micro USB port 3. Download the Aztech KylaS App from Google Play/App Store. WHAT YOULL NEED iOS or Android smart device:
- iOS 11 or later
- Android 4.4 or later Working router with Wi-Fi network connection OPERATION GUIDE 4. Login to the Aztech KylaS, and add Zigbee Hub to the device list by following the setup guide on the app. 5. When prompted, scan the QR code on the device or packaging box. 6. Connect other products with the Zigbee Hub for seamlessly connected smart home experience. RESETTING THE ZIGBEE HUB Press and hold the button for more than 5 seconds. The LEDs will turn off when you release the button, which means the device has cleared the current network and is ready to connect to a new network. 1 2 3 4 LED STATUS LED 1 COLOUR STATUS REMARK Green On Power On Blinking (0.2s on, 0.2s off) Red Green & Red On Off LED 2 Resetting and Connecting to WiFi Network Not Connected to WiFi Network Power Off COLOUR STATUS REMARK Green Blink once Blinking (0.2s on, 0.2s off) Red On Green & Red Off Receiving a Command Package from cloud Zigbee Network Open (Zigbee Device is allowed to join) Receiving a Data Package from Zigbee Device Zigbee Network Close (reject device from joining, normal working mode) LED 2 LED 1 ZIGBEE HUB EASY START GUIDE 2019 Aztech Technologies Pte Ltd. All rights reserved. 5 6 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In order to comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user's body and the smart signal converter (including the antenna).