FCC ID: QRP-SP-027 Mobile Phone

A L L R I G H T S R E S E R V E D 2021. All rights reserved! No replication allowed!

This handbook is for reference only. Software might upgr ade any time, and no further notifications will be announc ed. SAFETY PRECAUTIONS Please read the following safety guidelines before using the device. Do not use the phone while you are driving. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Keep your phone and its accessories away from children. Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Contacts having active medical implants should keep their cell phone at least 15 cm away from the implant. Permanent hearing loss may occur if you use earphones or headphones at high volume. Use a wireless hands-free system (headphone/

headset) with a low power Bluetooth emitter. Make sure the cell phone has a low SAR. Keep your calls short or send a text message

(SMS) instead. This advice applies specially to children adolescents and pregnant women. Use cell phone when the signal quality is good. 1 T A B L E O F C O N T E N T S ALL RIGHTS RESERVED ....................................... 1 TABLE OF CONTENTS ......................................... 2 1. UNDERSTANDING YOUR DEVICE .................. 4 1.1 DEVICE OVERVIE ............................................................ 4 2.INSTALLING CARDS ......................................... 5 3.POWERING ON/OFF THE DEVICE ................... 7 3. SYSTEM GUIDE ................................................ 8 3.1 MAIN SCREEN OPERATING ........................................ 8 3.2 USING YOUR PHONE ................................................... 8 3.3 CALLING ............................................................................ 8 3.4 MESSAGING ..................................................................... 9 3.5 CONTACTS ..................................................................... 10 3.6 BROWSER ....................................................................... 10 4. HOME SCREEN .............................................. 11 4.1 CUSTOMIZING SCREEN ............................................. 11 5. MULTIMEDIA ................................................ 12 5.1 FILE MANAGER ............................................................. 12 5.2 CAMERA .......................................................................... 12 5.3 GALLERY .......................................................................... 12 5.4 FM RADIO ....................................................................... 12 2 6. APPLICATIONS & UTILITIES ......................... 13 6.1 CALCULATOR ................................................................ 13 6.2 CLOCK .............................................................................. 13 3 1 . U N D E R S T A N D I N G Y O U R D E V I C E 1.1 DEVICE OVERVIE Position of keys 1. Earphone jack 3. Earpiece 5. Microphone 7. Speaker 9. Power key 11. Flash 2. Front camera 4. Touch screen 6. Type-C port 8. Volume key 10. Back camera 4 2 . I N S T A L L I N G C A R D S Please power off your device before inserting or removing the SIM card and memory card. Installing SIM card or Memory card Remove the back cover of the device. Insert the Nano card or TF card correctly. Push the Nano card to the correct position. 5 TF Card SIM Card 6 3 . P O W E R I N G O N / O F F T H E D E V I C E Turning On the Device After installing the SIM cards and charging the battery, you are now ready to turn on your device. Long press the Power key to turn on the device. The first screen that appears is known as the Home/Idle Screen. Drag up the unlock icon to release the screen. If the screen turns off, then short press the Power key to turn on the display. Turning Off the Device Long press the Power key. A pop-up window appears, select Power off. 7 3 . S Y S T E M G U I D E 3.1 MAIN SCREEN OPERATING Notification Panel The table below lists various icons that might appear on the notification Panel of the device. Network intensity of SIM card Battery level of the device New short message Headset is plugged in Wi-Fi is connected Bluetooth is activated 3.2 USING YOUR PHONE Enter main menu In idle mode slide up screen to enter the main menu on the desktop and press the Home or Back key to return. Enter sub menu In the main menu click the icon to select the sub menu, press the Back key to return to the previous menu, and press the Home key to return to the Home screen. 3.3 CALLING 8 To Make Calls appears on the screen, then you can to delete a wrong number. Tap and hold it If the icon make or receive calls. To make a call, please follow the steps mentioned below:

Tap

, enter the phone number using the on-screen keyboard. Tap to erase the entire number. After entering phone number, tap To end the call, tap 3.4 MESSAGING For using your device for sending and receiving of SMS

(Short Message Service) and MMS (Multimedia Message Service), go to Main Menu and then select Messaging. Creating a Message Tap Start chat Compose new message. In Type a name, phone number or email address field; enter the recipients phone number or email address and enter the Subject. Type message in the Text message field. Tap to Send. Receiving and Managing Messages When you send and receive messages to or from a contact, these messages are grouped as a message thread. A message thread looks like an exchanged conversation. 9 MULTIMEDIA MESSAGE A Multimedia message or MMS can contain letters, an image, an audio or video file. To create and send a MMS, please follow the steps mentioned below:

Enter the Main Menu, select Messaging. Tap message in the Text message field. Select In Type a name, phone number or email address field; enter the recipients phone number or email address and enter the Subject. To insert text, tap Type to compose, and then enter your message. 3.5 CONTACTS You can save information such as name, phone numbers, etc. for each contact listed in your Contacts menu. To add a Contact Enter the Main Menu select Contacts. add to contacts . Tap Store the contact to SIM card or Phone contact. You can fill out as many or as little fields as youd like for the contact. Tap SAVE to save the contact. 3.6 BROWSER The Browser is the tool which enables you to access the Internet. 10 4 . H O M E S C R E E N 4.1 CUSTOM IZING SCREEN The device features a touchscreen with idle displays and access to utilities at just one-touch. So swipe right or left to navigate through various screens accessing your favorite features without entering the main menu. Each screen can be customized by adding various widgets, shortcuts and folders. Shortcuts In order to add a shortcut on the screen: Long press on the desired application to add on the screen. Widgets Save time with live updates right on Home screen and get all of your personalized updates at one place. Setting the wallpaper You can customize the wallpaper of your Home screen with default wallpaper or with pictures taken from your device. Long press the idle/Home Screen > Wallpapers. Rotating Your Mobile Phone Screen The orientation of most screens will change to landscape or portrait view when you rotate your phone sideways. On the Home screen, Settings > Display > When devices is rotated>Stay in portrait view. 11 5 . M U L T I M E D I A Your device features various multimedia options, such as Music Player, Camera and Video Player. 5.1 FILE MANAGER You can browse, open and manage the data saved in the Device and Memory card by accessing the File Manager sub-menu. The device provides a certain space for users to manage files and supports the T-Flash card. You can use the file browser to conveniently manage various directories and files on the T-Flash card. 5.2 CAMERA Your device is equipped with a camera and camcorder that enable you to capture photos and videos. 5.3 GALLERY You can view the captured images, recorded video clips, and downloaded images in the Gallery. The picture folder and video folder will be displayed. Select to view the camera pictures or camera videos. The images or videos will be displayed in thumbnails. 5.4 FM RADIO You can use your phone to listen to FM radio stations once the original Headset is plugged into the connector. Please press the side key to adjust music volume. to pause FM radio function. Tap the ( < > ) to Tap search the channels. 12 6 . A P P L I C A T I O N S & U T I L I T I E S For your entertainment purpose, your device is provided with several interesting games, applications and utilities. Please ensure that you have GPRS setting in your device to access the applications. Contact your operator for GPRS settings. 6.1 CALCULATOR Calculator helps you perform basic arithmetic functions, such as addition, subtraction, multiplication and division. 6.2 CLOCK This function gives you an access to the alarm clock. Slide up screen Clock

> tap to add alarm. Tap 13 E N V I R O N M E N T A L C O N C E R N We strive to make products that are safe for our consumers as well as the environment. Come join hands with us and make world a better place to live in. Preserve natural resources for future generations by recycling your phone. The phone contains some metals, when recycled properly; these can be put back into circulation, decreasing the need for new metal mining. Recycling reduces the need for raw materials, saves energy, helps mitigate Global Warming and reduces pollution, reduces waste products in landfills; therefore, preserves natural resources for the future and saves the planet. Follow some simple steps and contribute towards saving the planet. DOs Recycle your handset and its accessories. To protect natural resources and to promote re-use of the material, kindly separate batteries from other type of waste. DONTs Do not dispose of your mobile and its battery in fire. Do not dispose your mobile with regular waste. Do not overcharge your handset. Remove the charger when battery is full. Dont trash your phone, instead RECYCLE it. This logo signifies that this product and/or its constituents should not be disposed off with other household waste. 14 Hazards of Improper handling, accidental breakage, damage and /or improper recycling of hazardous elements If this product is improperly handled, broken or damaged or carelessly recycled or disposed off in the fire, can result in environmental and data security concerns, including the following:

Affect nearly every system in the human body and result in birth defects, brain, heart, liver, kidney and skeletal system damage. They will also significantly affect the nervous and reproductive systems of the human body;

When burned, create cancer-producing dioxins which are released into the air we breathe; If thrown in landfills, may leach into groundwater affecting your local community;

In warm climates, the oxidation of mercury in the environment can be accelerated, leading to the creation of oxidized Hg atoms that are known to be associated with ozone depletion; and Improper recycling additionally results in data security issues, as private electronic information remains on the hard drive, if not properly removed before disposal. How to Recycle Please get your electronic devices recycled only through authorized recyclers, approved by the Pollution Control Board. We provide a facility of recycling of our products. For details of our collection centers, please visit our website or call our customer care. Help us to GO GREEN. 15 Constitution of Hazardous Elements in your Device:

Your device does not contain the following hazardous elements in a proportion higher than the limits provided hereunder: maximum concentration value of 0.1% by weight in homogenous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers; and maximum concentration value of 0.01% by weight in homogenous materials for cadmium. FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modifications to this product not authorized by Azumi S.A could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. 16 This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. SAR Statement:

This Mobile Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Mobile Phone

(FCC ID: QRP-SP-027) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 17

AZUMI MODELO: V65+

IMEI N*: 12345678901234X SN: 0000000000000 FCCID: QRP-SP-027 HECHOEN CHINA Handset label 40*45mm

Azumi S.A Agent Authorization Company: Azumi S.A Address: Avenida Aquilino de la Guardia con Calle 47, PH Ocean Plaza, Piso 16 of. 16-01, Marbella, Ciudad de Panama, Panama Product Name: Mobile Phone Model Number(s): V65+,V65 Product Description: Mobile Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022.03.09 Signature:

Name:

Kevin Zou Title:

General Manager Company: Azumi S.A

Azumi S.A Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/09/2022 Subject; Request for Confidentiality FCC ID: QRP-SP-027 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Kevin Zou Title: General Manager

Azumi S.A Family models difference declaration Product Name: Mobile Phone Trade Name: AZUMI Model Name: V65+,V65 Difference declaration:

All the model are the same circuit and RF module, except the memory. Regards, Signature Name: Kevin Zou Date: 2022-03-09

Operation Description 1 System Overview 1.1 Overview UMW2652 is a highly integrated 4-in-1 connectivity single chip which offers the lowest RBOM in the industry for smart phone, PC, STB, OTT, IoT and automotive applications. This chip includes 2.4 GHz WLAN IEEE 802.11 b/g/n Radio, Bluetooth 5 with supporting high power mode, Direction Finding and Long Range, multiple mode concurrent reception of GPS/Galileo/Glonass/Beidou(B1I & B1C) satellite systems and an FM receiver. Additionally, this radio-on-a-chip integrates power amplifiers, receive low noise amplifiers and RF TR switch. for Android Context Hub. It supports SDIO 3.0 for Wi-Fi, high-speed 4-wire UART for Bluetooth and GNSS, I2C/UART Advanced Spreadtrum Green Wi-Fi power management features optimize Wi-Fi active and low power states to extend operating lifetime for battery driven devices. Spreadtrum Chorale provides high performance multiple radio coexistence and antenna sharing technology for Wi-Fi, Bluetooth, GNSS and LTE operating concurrently in compact system design. 1.2 Features 1.2.1 General Features Dual ARM Cortex M4 architecture with platform computing offloading and advanced energyefficient management features Rich interfaces support variant application development SDIO 3.0, 4 x UART, I2S/PCM, I2C,SPI for NOR Flash and Display, WCI-2, JTAG, GPIOs, PWM Integrated Android Context Hub interface, supports low power and offloading profiles ofcontext awareness applications Supports standard crystal TSX and reference clock output Supports external Wi-Fi 2.4 GHz PA and LNA Supports world wide regulatory 152 Ball BGA package (size 5.3 mm x 6.5 mm) 1.2.2 Wi-Fi Features Dual band 2.4G IEEE 802.11b/g/n Complies with Wi-Fi VHT R2, supports DL MU-MIMO and beamformee Spreadtrum Extreme provides QAM-256 in 2.4 GHz band to improve 33% PHY data rate Spreadtrum Chorale antenna sharing and coexistence solution delivers excellent LTE, Wi-Fi,Bluetooth 5, GNSS concurrent operation performance in a compact and cost effective systemdesign Spreadtrum Green Wi-Fi provides excellent low power consumption features in Wi-Fi normaloperation and low power states Supports IEEE 802.11 FTM, Wi-Fi Location and timing measurement Supports WMM-PS QoS, Wi-Fi Direct, Miracast R2, Passpoint 2.0, Wi-Fi Aware, etc. Supports WEP,WPA/WPA2/WPA3-Personal/WPA3-Enhanced Open, WPS 2.0, WAPI, WPI-SMS4, EAP-TLS/EAP-TTLS/EAP-PEAP/EAP-SIM/EAP-AKA/EAP-AKA, IEEE 802.11wProtected Management Frame Complies with IEEE 802.11 d/e/h/i/k/r/u/z Supports both single and multiple channel concurrency Supports background scan, ARP, TCP/UDP checksum offload, IPv6 NS/RA offloading Supports spur immunity to avoid performance degradation caused by spur generated by PCB 1.2.3 Bluetooth Features Bluetooth 5, Bluetooth Smart Ready compliant Bluetooth classic and Low Energy dual mode concurrent operation Supports LE 2 Mbps, LE Advertise Extension, Long Range, AoD Rx Direction Finding andMesh Integrated 10 dBm high efficiency on-chip PA for low energy application Integrated 20 dBm high power on-chip PA for Bluetooth high power mode application Integrated wide-band speech processing to improve voice quality Supports Low Energy background scan for context awareness applications Supports multiple piconets and up to 8 concurrent Bluetooth Low Energy concurrent links 1.2.4 GNSS Features Dual band concurrent reception of GPS/Galileo/GLONASS/Beidou(B1I & B1C) to improvelocation accuracy and positioning performance Fully A-GNSS compliant and capabilities, supports SUPL/A-Beidou/A- GLONASS Integrated high performance RF path to reduce system design complexity Supports Satellite Based Argumentation systems (SBAS) Supports high location accuracy, less than 1 m Excellent tracking and hot start sensitivity Supports inertia tracking Equivalent series resistance (ESR) : 30 Main frequency: 26MHz Frequency tolerance:

1.2.5 FM Features Supports frequency range of 65 MHz ~ 108 MHz Supports RDS Digital stereo demodulator Digital audio interface (I2S) Stereo Mono blending and auto selectivity Crystal 2520 26MHZ 9.0PF SXT25Y026000B91T02 10ppm Load capacitance value: 9pF Bluetooth Operating Frequency 2402MHz~2480MHz Modulation GFSK, /4-DQPSK, 8-DPSK Number of Channels 79 Channels Antenna Type PIFA Antenna Antenna Gain 1.1dBi BLE Operating Frequency 2402MHz~2480MHz Modulation GFSK Number of Channels 40 Channels Antenna Type PIFA Antenna Antenna Gain 1 .1dBi WIFI2.4G Operating Frequency 2412-2462MHz for 802.11b/g/11n(HT20);

2422-2452MHz for 802.11n(HT40);

Modulation DSSS with DBPSK/DQPSK/CCK for 802.11b;

OFDM with BPSK/QPSK/16QAM/64QAM for 802.11g/n;

Number of Channels 11 channels for 802.11b/g/11n(HT20);

7 channels for 802.11n(HT40);

Antenna Type PIFA Antenna Antenna Gain 1.1dBi GSM/WCDMA GSM850: TX824.2MHz~848.8MHz /RX869.2MHz~893.8MHz;

UMTSFDD Band V: TX826.4MHz~846.6MHz /RX871.4MHz~891.6MHz;

Operating Frequency PCS1900: TX1850.2MHz~1909.8MHz /RX1930.2MHz~1989.8MHz;

UMTS FDD Band II: TX1852.4MHz~1907.6MHz /RX1932.4MHz~1987.6MHz;

UMTS-FDD Band :TX1710MHz~1755MHz /RX2110MHz~2155MHz Modulation 8PSK for EGPRS;

GMSK for GSM/GPRS;

QPSK for UMTS bands;

Power Class 4, tested with power level 5(GSM 850) 1, tested with power level 0(GSM 1900) 3, tested with power control all 1(WCDMA Band II/IV/V) GPRS Class Multi-Class12 Only 4 timeslots are used for GPRS and EGPRS Antenna Type PIFA Antenna Antenna Gain 0.59dBi LTE Frequency Range:

Type of Modulation:

QPSK/16QAM Power Class Class 3 Antenna:

PIFA Antenna Antenna gain:

0.57dBi, LTE FDD Band 2 Uplink: 1850MHz-1910MHz, Downlink: 1930MHz-1990MHz;

LTE FDD Band4Uplink: 1710MHz-1755MHz, Downlink: 2110MHz-2155MHz;

LTE-FDD Band7Uplink: 2500MHz-2570MHz, Downlink: 2620MHz-2690MHz;