Date:
B&R radio board
"RFM-1-BTWNF" - integration manual November 20, 2017 We reserve the right to change the content of this manual without prior notice. The information contained herein is believed to be accurate as of the date of publication, however, B&R makes no warranty, expressed or implied, with regards to the products or the documentation contained within this document. B&R shall not be liable in the event if incidental or consequential damages in connection with or arising from the furnishing, performance or use of these products. The software names, hardware names and trademarks used in this document are registered by the respective companies. Copyright B&R Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 1/8 B&R radio board
"RFM-1-BTWNF" - integration manual I Versions Version Date Comment 1.0 2.0 3.0 Aug 16, 2017 First Edition Aug 25, 2017 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 Nov 13, 2017 1, 1.1, 1.3, 1.6 Table 1: Versions II Distribution Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. Edited by Falch B. Falch B. Falch B. Name Company, Department Amount Remarks Table 2: Distribution III Safety Notices Safety notices in this document are organized as follows:
Safety notice Description Danger!
Disregarding the safety regulations and guidelines can be life-threatening. Warning!
Caution!
Information:
Table 3: Safety notices Disregarding the safety regulations and guidelines can result in severe injury or heavy damage to mate-
rial. Disregarding the safety regulations and guidelines can result in injury or damage to material. Important information used to prevent errors. Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 2/8 B&R radio board
"RFM-1-BTWNF" - integration manual IV Table of Contents Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. 1 integration guide......................................................................................................... 4 1.1 Technical data ................................................................................................................................. 4 1.2 software / driver ............................................................................................................................... 4 1.3 identification .................................................................................................................................... 4 1.4 RF exposure .................................................................................................................................... 5 1.5 CE conformity .................................................................................................................................. 5 1.6 FCC and IC ..................................................................................................................................... 5 2 Figure Index ................................................................................................................ 6 3 Table Index .................................................................................................................. 7 4 Index ............................................................................................................................ 8 Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 3/8 B&R radio board
"RFM-1-BTWNF" - integration manual 1 integration guide Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. The B&R wireless board can only be installed in B&R units and is to be connected via a cable with 2 USB interfaces, which must be short-circuit-proof (no fire hazard). The circuit board may be glued, screwed or other mounting methods on the Touch Screen, display, metal, plastic or other surfaces. There are no additional basic conditions which must be complied for the connec-
tion with a cable to the USB interface. Only B&R is allowed for this integration. Figure 1: B&R wireless board RFM-1-BTWNF 1.1 Technical data Operating temperature:
USB supply voltage:
WLAN 0C to +75C surrounding temperature
+5VDC 5%
WLAN interface between different PC systems in an industrial environment. Frequency:
Transmitter power: max. 17 dBm 2.4 GHz - 2.4835 GHz Bluetooth Bluetooth interface between different PC systems in an industrial environment. Frequency:
Transmitter power: Max. 10 dBm 2.4 GHz - 2.4835 GHz Short range device (SRD: NFC/RFID) Short range interface between PC systems and tags in an industrial environment. Frequency:
13.56 MHz Transmitter power: max. 1dBm 1.2 software / driver The B&R wireless board works under Windows 10 which supports the Realtek 8723BU chipset for the WLAN/ Bluetooth part and the TWN4 for the NFC/RFID part. In addition all needed drivers can be downloaded from the B&R homepage
(https://www.br-automation.com/). 1.3 identification The complete end-device must contains following labels or engraved or lasered informations for the dec-
laration of the B&R wireless board RFM-1-BTWNF (for example on the Automation panel device):
contains FCC ID: 2ADFV-RFM-1-BTWNF contains IC: 12444A-RFM1BTWNF contains FCC ID: VVX811-04XX contains IC: 10531A-LM811 Figure 2: CE, FCC label Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 4/8 B&R radio board
"RFM-1-BTWNF" - integration manual Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. The B&R wireless board has to be part of the bill of material of the complete end device and must be identifiable by the serial number of the complete end device. 1.4 RF exposure From the view point of FCC RF exposure complains with a separation distance of 5mm between the an-
tenna and each bodies. For Europe the radio board complains to the RF exposure with no efforts to operation distance between human bodies (head, hand, ..) and antenna. 1.5 CE conformity The complete end-device must be conform to the radio equipment directive RED 2014/53/EU. In this case an end-device must comply the immunity and emission requirements up to 6GHz according to EN 303 446-2. 1.6 FCC and IC B&R products satisfy EMC requirements for operation in the USA and Canada and are compliant with FCC and IC regulations. This has to be verified with every device in which this B&R wireless board RFM-
1-BTWNF should be installed. Corresponding "Radio Frequency Interference Statements" for the USA and Canada:
USA:
Federal Communications Commission
(FCC) This device complies with Part 15 of the FCC Rules and with Industry Cana-
da license exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un-
desired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Canada:
Industry Canada (IC) If products are also equipped with an RFID read/write unit, it must be approved for operation in the USA and Canada. These types of products are identified by a sticker with "Contains FCC ID:" and " IC" on the RFID read/write unit. In addition to the additional sticker for products with an RFID read/write unit, the re-
quirements below also apply. Information:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Information:
This equipment has been tested and found to comply with the limits for a Class A digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 5/8 B&R radio board
"RFM-1-BTWNF" - integration manual 2 Figure Index Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. Figure 1: B&R wireless board RFM-1-BTWNF ....................................................................................... 4 Figure 2: CE, FCC label ........................................................................................................................... 4 Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 6/8 B&R radio board
"RFM-1-BTWNF" - integration manual 3 Table Index Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. Table 1: Versions ..................................................................................................................................... 2 Table 2: Distribution ................................................................................................................................. 2 Table 3: Safety notices ............................................................................................................................. 2 Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 7/8 B&R radio board
"RFM-1-BTWNF" - integration manual 4 Index Fehler! Verwenden Sie die Registerkarte 'Start', um Heading 1 dem Text zuzuweisen, der hier angezeigt werden soll. D S Distribution..........................................................2 Safety Notices.................................................... 2 F T Figure Index........................................................6 Table Index ........................................................ 7 Table of Contents............................................... 3 I Index ..................................................................8 integration guide .................................................4 V Versions ............................................................ 2 Copyright B&R - Subject to change without notice 2017-11-13 B&R wireless board RFM-1-BTWNF integration guide ENG_v3.docx November 20, 2017 8/8