User Manual Components Please check the package for any missing or damaged component.
* Photo may vary from actual product. SP520N Main Power adapter LAN Cable Manual Customer service : www.voison.co.kr / support@bcinc.co.kr This wireless device may cause propagation interference, and so, it cannot be involved with life-saving services. SP520N Setup Setup Methods Connect the components as in the figure and setup according to the following sequence. Modem Type LAN Type Modem
LEDs & Back Panel
Registration
Internet connection Computer connection Caution
Internet Setting of SP520N SP520N Connection Open setup screen as follows after proper connection of SP520N.
http://192.168.200.254 in the address field of the internet brower.
the Settings screen.
adminvoison Caution
DHCP(Auto config)
Menu Sequence
Entering the field
Finishing settings
Internet Setting of SP520N Wireless setting Change SSID and password of the wireless network before use. Menu Sequence
Entering the field
*The default password is the "MAC address". Finishing settings
NOTE
Caution
DDNS Settings
Menu Sequence
Entering the field
Finishing settings
NOTE
Outbound Internet phone Creating an Outbound Enter the account information provided by the service provider to use Internet phone. Menu Sequence
Entering the field
Finishing settings
NOTE
Caution
Outbound Internet phone Adding Outbound calls Adding outbound calls can be created for internet phone calls. Menu Sequence
Entering the field
the account. Finishing settings
after entering the data. NOTE
- Up to 20 outbound lines can be added.
Editing outbound calls
Menu Sequence
Entering the field
Finishing settings
NOTE
Extension account and service Creating Extensions Create extensions account. Menu Sequence
Entering the field
Finishing settings
NOTE
Caution
Extension account and service Extensions and Service Setup Extensions accounts can be modified. Extension account change
Delete Local Extension
NOTE
Changing the service settings
Status indicator
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following Two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
which the receiver is connected. Connect the equipment into an outlet on a circuit different from that to
Consult the dealer or and experienced radio/TV technician for help. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment.