Data Sheet Model:
BF-IDU05 RFID Reader Operational Description This device is a RFID reader operating at 902 .. 928 MHz to read and write RFID tags according to ISO18000-63 / EPC Global Gen2 standard in industrial environment. The device is intended to operate in combination with a controller which allows connection to control devices with standard industrial bus protocols. The device is powered by 24 V limited power supply of the mentioned controller and communicates with this controller via RS-232. Electrical Data Operating voltage Vs Current draw (at 24 V DC) Operating Frequency Operating channels (in MHz) 21.6 .. 26.4 V DC 400 mA 902 .. 928 MHz 902.75 903.25 903.75 904.25 904.75 905.25 905.75 906.25 906.75 907.25 907.75 908.25 908.75 909.25 909.75 910.25 910.75 911.25 911.75 912.25 912.75 913.25 913.75 914.25 914.75 915.25 915.75 916.25 916.75 917.25 917.75 918.25 918.75 919.25 919.75 920.25 920.75 921.25 921.75 922.25 922.75 923.25 923.75 924.25 924.75 925.25 925.75 926.25 926.75 927.25 36 dBm (4 W) EIRP1 30 dBm2 Maximum Transmit Power Maximum Port Power Mechanical Data Housing material: Aluminium, anodized Weight: 850 g Ambient temperature range: -20C ... +55C Device size: Length x Width x Height = 188 mm x 105 mm x 57 mm 1 Maximum Transmit Power is ensured by the software UHF Manager by consideration of cable loss and antenna gain. The UHF Manager is used to adjust the RFID reader through the mentioned controller. 2 Maximum Port Power is also limited by the software UHF Manager. Page 1 of 3 Data Sheet Model:
BF-IDU05 RFID Reader Regulatory Notes USA:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance voids the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiofrequency radiation exposure Information:
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 50 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un Environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 50 cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas tre place au mme endroit ou utilise simultanment avec un autre transmetteur ou antenne. Page 2 of 3 Data Sheet Model:
BF-IDU05 RFID Reader Canada:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lemetteur/recepteur exempt de licence contenu dans le present appareil est conforme aux CNR dInnovation, Sciences et Developpement economique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. This radio transmitter 20739-BFIDU05 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le present emetteur radio 20739-BFIDU05 a ete approuve par Innovation, Sciences et Developpement economique Canada pour fonctionner avec les types d'antenne enumeres cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est superieur au gain maximal indique pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'emetteur. Antenna type BIS U-303-C1-TNCB BIS U-301-C1-TNCB Antenna gain 5.5 dBi (8.5 dBic) 2.5 dBi (5.5 dBic) Antenna impedance 50 50 Page 3 of 3