all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 930.27 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
Internal Photos | Internal Photos | 241.57 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
External Photos | External Photos | 137.06 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
Label | ID Label/Location Info | 1.57 MiB | April 02 2024 / April 12 2024 | |||
1 |
|
Attestation letter | Attestation Statements | 523.94 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
Attestation letter 2.911(D)(5) | Attestation Statements | 1005.83 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
Attestation letter 2.911(D)(7) | Attestation Statements | 393.49 KiB | April 02 2024 / April 12 2024 | |||
1 | Block Diagram | Block Diagram | April 02 2024 | confidential | ||||
1 | Operational Description | Operational Description | April 02 2024 | confidential | ||||
1 |
|
RF Exposure report | RF Exposure Info | 506.95 KiB | April 02 2024 / April 12 2024 | |||
1 | Schematics | Schematics | April 02 2024 | confidential | ||||
1 |
|
Test Report | Test Report | 4.56 MiB | April 02 2024 / April 12 2024 | |||
1 |
|
Test setup photos | Test Setup Photos | 1.99 MiB | April 02 2024 / April 12 2024 | |||
1 |
|
antenna information | Test Report | 238.43 KiB | April 02 2024 / April 12 2024 | |||
1 |
|
cover letter | Cover Letter(s) | 430.79 KiB | April 02 2024 / April 12 2024 |
1 | Manual | Users Manual | 930.27 KiB | April 02 2024 / April 12 2024 |
Q90R2 Radar Sensor Manual Original Instructions p/n: 237883 Rev. 1 March 20, 2024 Banner Engineering Corp. All rights reserved. Preliminary Contents Chapter 1 Models ........................................................................................................................................................................................................... 3 Overview........................................................................................................................................................................................................ 3 Features and Indicators................................................................................................................................................................................. 4 Banner Sensor Tool ....................................................................................................................................................................................... 4 Chapter 2 Installation Instructions Sensor Orientation......................................................................................................................................................................................... 5 Wiring............................................................................................................................................................................................................. 5 Mount the Device........................................................................................................................................................................................... 5 Chapter 3 Specifications FCC Part 15 Class A for Intentional Radiators .............................................................................................................................................. 7 Industry Canada Statement for Intentional Radiators.................................................................................................................................... 7 Dimensions.................................................................................................................................................................................................... 8 Chapter 4 Accessories Cordsets ........................................................................................................................................................................................................ 9 Brackets....................................................................................................................................................................................................... 10 Chapter 5 Product Support Repairs .........................................................................................................................................................................................................11 Contact Us....................................................................................................................................................................................................11 Banner Engineering Corp. Software Copyright Notice .................................................................................................................................11 Banner Engineering Corp Limited Warranty.................................................................................................................................................11 Preliminary Q90R2 Radar Sensor Manual Chapter Contents Models.................................................................................................................................................................................................................. 3 Overview .............................................................................................................................................................................................................. 3 Features and Indicators........................................................................................................................................................................................ 4 Banner Sensor Tool.............................................................................................................................................................................................. 4 Chapter 1 FMCW radar detects moving and stationary objects Adjustablesensingfieldignoresobjectsbeyondsetpoint Easy setup and configuration of range, sensitivity, and output using the Banner Radar Configuration Software Sensing functions are immune to wind, fog, steam, and temperature changes and resistant to rain and snow Compact, rugged IP69K housing withstands harsh environments Highly configurable field of view enables precision positioning and control Reliable detection across a broad vertical and horizontal field of view WARNING:
Do not use this device for personnel protection Using this device for personnel protection could result in serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. IMPORTANT: To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 cm from all persons. Models Models Q90R2-12040-6KDQ Overview Detection Range 0.15 m to 20 m
(0.5 ft to 65.6 ft) Supply Voltage Telecom Approved Output 10 V DC to 30 V DC US, Canada, Europe Dual discrete
(NPN/PNP, PFM, and IO-Link) The Q90R2 is an industrial radar sensor that uses high-frequency radio waves from its internal antenna to detect and measure distance to objects in its field of view. The Q90R2 detects a wide variety of materials including metal, liquids, or organic materials. Use the supplied software, IO-
Link, or a remote input wire to configure the sensor to sense objects within a specified distance while ignoring objects beyond this distance (background suppression). Or configure the sensor to indicate the presence or absence of objects at a specific
(or "taught") distance or range of distances (retroreflective). March 20, 2024 Banner Engineering Corp. All rights reserved. page3 Preliminary Q90R2 Radar Sensor Manual Features and Indicators 1 3 2 4 1 2 3 4 LED Color Description Green Power Signal Strength Green Output 1 Amber Power ON Signal strength indication Discrete output 1 status Output 2 Amber Discrete output 2 status Banner Sensor Tool Use the Banner Sensor Tool software to:
Set up the sensor in 3 easy steps: set the switch point distance, signal strength threshold, and response time Easily monitor device status via the software Visualize the application in real-time Make adjustments to sensor settings on the fly For more information, visit www.bannerengineering.com/us/en/products/sensors/software/
radar-configuration.html. page4 Banner Engineering Corp. All rights reserved. March 20, 2024 Preliminary Q90R2 Radar Sensor Manual Chapter Contents Sensor Orientation ............................................................................................................................................................................................... 5 Wiring ................................................................................................................................................................................................................... 5 Mount the Device ................................................................................................................................................................................................. 5 Chapter 2 Installation Instructions Sensor Orientation Correct sensor-to-object orientation is important to ensure proper sensing. Minimize the tilt angle of a target relative to the sensor. The target should be tilted less than half of the beam angle. Wiring Quick disconnect wiring diagrams are functionally identical. Dual Discrete Output Key:
bn (1) bu (3) bk (4) wh (2) gy (5) Load Load N P N P N P
1030VDC D1_Out*/IO-Link D2_Out*/PFM**
Input
* Push-Pull output. User-configurable PNP/NPN setting.
** Pulse Frequency Modulation 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray (Connect for use with remote input or Banner Radar Configuration software) 2 3 1 4 5 NOTE: Banner recommends that the shield wire (quick-disconnect cordsets only) be connected to earth ground or dc common. Shielded cordsets are recommended for all quick-disconnect models. Mount the Device 1. 2. 3. 4. If a bracket is needed, mount the device onto the bracket. Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tighten the mounting screws at this time. Check the device alignment. Tighten the mounting screws to secure the device (or the device and the bracket) in the aligned position. March 20, 2024 Banner Engineering Corp. All rights reserved. page5 Preliminary Q90R2 Radar Sensor Manual Chapter Contents FCC Part 15 Class A for Intentional Radiators ..................................................................................................................................................... 7 Industry Canada Statement for Intentional Radiators .......................................................................................................................................... 7 Dimensions........................................................................................................................................................................................................... 8 Chapter 3 Specifications Indicators Power LED: Green, power on Signal Strength LED:
Green Flash: weak signal Green Solid: 4 threshold Output LEDs: Amber, target within taught analog span/
discrete output status Construction Housing: Aluminum Window: Polycarbonate Connections Integral M12 quick disconnect Models with a quick disconnect require a mating cordset VibrationandMechanicalShock All models meet MIL-STD-202G, Method 201A (Vibration: 10 Hz to 60 Hz, 0.06 inch (1.52 mm) double amplitude, 2 hours each along X, Y and Z axes) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. Method 213B conditions H&I. Shock: 75G with device operating; 100G for non-operation Operating Temperature Standard model: 40Cto+65C(40Fto+149F) Temperature Effect
<10 mm from 40Cto+65C(40Fto+149F) Environmental Rating IP67 per IEC60529 IEC IP69K per BS/ISO 20653:2013 Country of Origin USA Response Speed Response time Max Velocity Fast 48 ms 9 m/s Medium 132 ms 9 m/s Slow 240 ms 4.5 m/s Velocity resolution 0.5 m/s 0.25 m/s 0.15 m/s Operating Principle Frequency-modulated continuous-wave (FMCW) radar Operating Frequency 60 GHz to 61.5 GHz Transmitting Power peak E.I.R.P: <20 dBm mean E.I.R.P <20 dBm Field of View Horizontal:60 Vertical:20 Distance 0.15 m to 20 m (0.5 ft to 65.6 ft) Distance Resolution 0.1 m Supply Voltage (Vcc) 10 V DC to 30 V DC Use only with a suitable Class 2 power supply (UL) or Limited Power Supply (CE) Power and Current Consumption, exclusive of load Power consumption:<2.4W Current consumption: <100 mA at 24 V DC Supply Protection Circuitry Protected against reverse polarity and transient overvoltages Delay at Power-up
< 2 s Output Configuration DiscreteOutput1(BlackWire):IO-Link,push/pulloutput, configurable PNP or NPN output Discrete Output 2 (White Wire): Configurable PNP or NPN, or Pulse Frequency Modulated (PFM) output Output Protection Protected against output short-circuit Remote Input Allowable Input Voltage Range: 0 to Vsupply Active High (internal weak pull-down): High state > (Vsupply -
2.25 V) at 2 mA maximum Active Low (internal weak pull-up): Low state < 2.25 V at 2 mA maximum March 20, 2024 Banner Engineering Corp. All rights reserved. page6 Preliminary Specifications Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN Q90R2 Radar Sensor Manual ETSI EN 305 550 V2.1.0 ETSI EN 305 550-1 V.1.2.1 ETSI EN 305 550-2 V.1.2.1 FCCID:UE3Q90R2-6 IC:7044A-Q90R26 Install where not accessible by unauthorized personnel. The device shall only be accessible for adjustment, programming, or maintenance. The device was evaluated for IK08 impact energy in accordance with IEC 62262. Advanced Capabilities Output Ratings Analog Outputs:
CurrentOutput(Q90R.-.I..models):1kmaximumloadresistanceat24V;maximumloadresistance=[(Vcc-4.5)/
0.02]
VoltageOutput(Q90R.-.U..models):2.5kminimumloadresistance Currentrating = 50 mA maximum each Black wire specifications per configuration IO-Link Push/Pull PNP NPN PNP NPN Output High Output Low Output High Output Low Output High Output Low Vsupply-2.5V 2.5V Vsupply-2.5V 1V(loads1Meg) Vsupply-2.5V 2.5V White wire specifications per configuration Output High Output Low Output High Output Low Vsupply-2.5V 2.5V(loads70k) Vsupply-2.5V 2.5V FCC Part 15 Class A for Intentional Radiators This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
(Part15.21)Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheusersauthoritytooperatethis equipment. Industry Canada Statement for Intentional Radiators Thisdevicecontainslicence-exempttransmitters(s)/receiver(s)thatcomplywithInnovation,ScienceandEconomicDevelopmentCanadaslicence-exempt RSS(s). Operation is subject to the following two conditions:
1. 2. This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs/rcepteurs exempts de licence conformes la norme Innovation, Sciences, et Dveloppement conomique Canada. Lexploitationestautoriseauxdeuxconditionssuivantes:
1. Lappareilnedoitpasproduiredebrouillage. March 20, 2024 Banner Engineering Corp. All rights reserved. page7 Preliminary Q90R2 Radar Sensor Manual Specifications 2. Lutilisateurdelappareildoitacceptertoutbrouillageradiolectriquesubi,mmesilebrouillageestsusceptibledencompromettrelefonctionnement. Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. page8 Banner Engineering Corp. All rights reserved. March 20, 2024 Preliminary Q90R2 Radar Sensor Manual Chapter Contents Cordsets ............................................................................................................................................................................................................... 9 Brackets ............................................................................................................................................................................................................. 10 Chapter 4 Accessories Cordsets 5-PinThreadedM12CordsetswithShieldSingleEnded Model Length Style MQDEC2-506 2 m (6.56 ft) Straight MQDEC2-506RA 2 m (6.56 ft) Right-Angle Dimensions 44 Typ. M12 x 1 14.5 32 Typ.
[1.26"]
30 Typ.
[1.18"]
M12 x 1 14.5 [0.57"]
Pinout (Female) 2 3 5 1 4 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 5-PinMaleThreadedand5-PinFemaleQuickDisconnectM12CordsetwithShieldDoubleEnded Model MQDEC3-503SS Length "L1"
0.91 m (2.99 ft) Style Pinout (Male) MQDEC3-506SS 1.83 m (6 ft) Female Straight/Male Straight 14.5 M12 x 1 47.4 5.9 L1 47.4 2 3 1 4 5 1 4 Pinout (Female) 2 3 5 M12 x 1 14.5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Model Trunk(Male) Branches(Female) Pinout(Male) Pinout(Female) 5-PinThreadedM12SplitterCordsetwithFlatJunction CSB-M1251M1251B 0.3m(0.98ft) 0.3m(0.98ft) Continued on page 10 2 3 1 4 5 1 4 2 3 5 March 20, 2024 Banner Engineering Corp. All rights reserved. page9 Preliminary Q90R2 Radar Sensor Manual Accessories Continued from page 9 5-PinThreadedM12SplitterCordsetwithFlatJunction Model Trunk(Male) Branches(Female) Pinout(Male) Pinout(Female) M12 x 1 14.5 40 Typ. 3 x 5.9 14.5 M12 x 1 43.5 Typ. x 2 M12 x 1 1=Brown 2=White 3=Blue 4=Black 5=Gray NOTE: The splitter in the PRO-KIT has two male and one female connectors. The CSB-M1251M1251B splitter has one male and two female connectors. Use the CSB-M1251M1251B to connect the sensor to power and a one of the Banner Pro lights with the Pulse Pro output. Brackets SMBAMSQ90R Adjustable mounting bracket 14-Gauge 304 stainless steel M61mountinghardwareincluded SMBRAQ90R Right-angle mounting bracket 14-Gauge 304 stainless steel M61mountinghardwareincluded SMBMAG3 3.2inchdiametermagnetwith95lbspullforce UsewithLMBWLC90PT,SMBAMS70AS,SMBAMSQ90Rbracket Hardwareformountingtobracketincluded NOTE: UseSMBMAG3withSMBAMSQ90R. 84 82 47 6X 6.3 2X 6.5 4X 6.2 3X 7 87 84 54 page10 Banner Engineering Corp. All rights reserved. March 20, 2024 Preliminary Q90R2 Radar Sensor Manual Chapter Contents Repairs ................................................................................................................................................................................................................11 Contact Us...........................................................................................................................................................................................................11 Banner Engineering Corp. Software Copyright Notice........................................................................................................................................11 Banner Engineering Corp Limited Warranty........................................................................................................................................................11 Chapter 5 Product Support Repairs ContactBannerEngineeringfortroubleshootingofthisdevice.Do not attempt any repairs to this Banner device; it contains no field-replaceable parts or components.Ifthedevice,devicepart,ordevicecomponentisdeterminedtobedefectivebya Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure. IMPORTANT: If instructed to return the device, pack it with care. Damage that occurs in return shipping is notcoveredbywarranty. You may be asked to provide the configuration file and the data log file (.cfg) to aid in troubleshooting. Contact Us Banner Engineering Corp. headquarters is located at: 9714 Tenth Avenue North | Minneapolis, MN 55441, USA | Phone: + 1 888 373 6767 For worldwide locations and local representatives, visit www.bannerengineering.com. Banner Engineering Corp. Software Copyright Notice Banner Engineering Corp., All Rights Reserved. https://www.bannerengineering.com/us/en/company/terms-and-conditions.html Disclaimer of Warranties. This software is provided "AS-IS." To the maximum extent permitted by applicable law, Banner, it affiliates, and its channel partners disclaim all warranties, expressed or implied, including any warranty that the software is fit for a particular purpose, title, merchantability, data loss, non-
interference with or non-infringement of any intellectual property rights, or the accuracy, reliability, quality or content in or linked to the services. Banner and its affiliates and channel partners do not warrant that the services are secure, free from bugs, viruses, interruption, errors, theft or destruction. If the exclusions for implied warranties do not apply to you, any implied warranties are limited to 60 days from the date of first use of this software. Limitation of Liability and Indemnity. Banner, its affiliates and channel partners are not liable for indirect, special, incidental, punitive or consequential damages, damages relating to corruption, security, loss or theft of data, viruses, spyware, loss of business, revenue, profits, or investment, or use of software or hardware that does not meet Banner minimum systems requirements. The above limitations apply even if Banner and its affiliates and channel partners have been advised of the possibility of such damages. This Agreement sets forth the entire liability of Banner, its affiliates and your exclusive remedy with respect to the software use. Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change;
Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. March 20, 2024 Banner Engineering Corp. All rights reserved. page11 Preliminary Q90R2 Radar Sensor Manual Product Support For patent information, see www.bannerengineering.com/patents. page12 Banner Engineering Corp. All rights reserved. March 20, 2024 Preliminary LinkedIn Twitter Facebook 2024. All rights reserved. www.bannerengineering.com Preliminary
1 | Label | ID Label/Location Info | 1.57 MiB | April 02 2024 / April 12 2024 |
8 7 6 5 4 REV A INITIAL APPROVAL;
3 2 REVISION HISTORY DESCRIPTION 1 DATE 03-20-24 APPROVED J.KUEHL J.BRUNO D C B A X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
N R B U L B
T H W
K L B Y R G T y p e l 1 C a s s 2 P o w e r S u p p l y E 5 2 6 7 6 7 C O N T
. E Q P R O C
. F C C I D H V N I
X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
N R B U L B
T H W
K L B Y R G T y p e l 1 C a s s 2 P o w e r S u p p l y E 5 2 6 7 6 7 C O N T
. E Q P R O C
. F C C I H V N I
X X X X X X X D
X X X X X X X XXXXXX SIDE 2 SIDE 1 TOP XXXXXX ARTWORK IMAGE:
SCALE: 1:1 NOTES:
1. RAW LABEL: 235392 2. MATERIAL: WHITE POLYESTER WITH CLEAR POLYESTER COMPUTER IMPRINTABLE OVERLAMINATE 3. LABEL COLOR: MATTE BLACK 4. LETTERING & IMAGES MUST NOT BE TOUCHING EDGE OF LABEL NOR BE CUT OFF. 5. MAXIMUM IMAGE DEVIATION FROM ARTWORK: .05mm SEE SHEET 2 FOR LABEL CROSS REFERENCES DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED TOLERANCE ON ANGLE: 3 X X.X X.XX 0.5 0.3 0.15 INTERPRET DIMENSIONS & TOLERANCES PER ASME Y14.5M - 2009 THIRD ANGLE PROJECTION This drawing is the property of BANNER ENGINEERING CORP. and is proprietary in general and in detail. Its contents shall not be revealed to outside parties without written consent of BANNER. DATE DRAWN BY J. KUEHL APPROVED BY J. BRUNO APPROVED BY 03-20-24 DATE 03-20-24 DATE SIZE B SCALE 8 7 6 5 4 3 D C B A ALL SHEETS ARE THE SAME REVISION STATUS BANNER ENGINEERING CORP. P.O. BOX 9414 MINNEAPOLIS, MN 55440 TITLE LABEL PROGRAM Q90R2 DRAWING NO. 241536 REV. A 2:1 2 SHEET 1 OF 2 1 AI D C B A 7 6 5 4 3 2 1 8 LEGEND Raw Label Artwork Preprinted/Static, drawn in Codesoft Created in LRI from Oracle data Oracle produced data (Cross References) 1 2 3 4 5 6 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
N R B U L B
T H W
K L B Y R G E G A G
R T y p e l 1 C a s s 2 P o w e r S u p p l y H V N I
X X X X X X X F C C I D
X X X X X X X E 5 2 6 7 6 7 C O N T
. E Q
. P R O C
. 8 10 11 9 TOP R-GAGE SIDE 1 SIDE 2 Q D K 6
0 4 0 2 1
2 R 0 9 Q k n i L
O I
M F P
2 e t e r c s D e t e r c s D i i c d V 0 3
0 1 V 0 t u p n I
N R B U L B
T H W
K L B Y R G T y p e l 1 C a s s 2 P o w e r S u p p l y E 5 2 6 7 6 7 C O N T
. E Q P R O C
. H V N I
Q 9 0 R 2
6 F C C I D
U E 3 Q 9 0 R 2
6 XXXXXX 12 7 SIDE 2 SIDE 1 TOP 24077A LABEL APPLICATION LABEL FIELDS:
1. Model - Arial Bold, 7pt., 80%w 2. [LBL- TEXT 1] - Arial, 5pt. 3. [LBL- TEXT 2] - Arial, 5pt. 4. [LBL- TEXT 3] - Arial, 5pt. 5. [LBL-TEXT 4] - Arial, 5pt. 6. [LBL- TEXT 5] - Arial, 5pt. 7. Date Code & Plant Code (YYDDDX format) - Arial, 6 pt 8. CE Logo [AGCY- CE APPROVAL] (141385.jpg) - 5w x 7h 9. UL Logo [AGCY- UL APPROVAL] (238721.jpg) - 6w x 14.5h 10. FCC Logo [LBL- IMAGE 1] (224820.jpg) - 5.5w x 6.5h 11. FCC ID + [AGCY- FCC] - Arial, 5pt., 90%w 12. HVIN + [LBL- TEXT 6] - Arial, 5pt., 90%w 13. All other graphics and text are static. DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED TOLERANCE ON ANGLE: 3 X X.X X.XX 0.5 0.3 0.15 INTERPRET DIMENSIONS & TOLERANCES PER ASME Y14.5M - 2009 THIRD ANGLE PROJECTION This drawing is the property of BANNER ENGINEERING CORP. and is proprietary in general and in detail. Its contents shall not be revealed to outside parties without written consent of BANNER. DATE ALL SHEETS ARE THE SAME REVISION STATUS BANNER ENGINEERING CORP. P.O. BOX 9414 MINNEAPOLIS, MN 55440 TITLE LABEL PROGRAM Q90R2 DRAWN BY J. KUEHL APPROVED BY J. BRUNO APPROVED BY 03-20-24 DATE 03-20-24 DATE SIZE B SCALE DRAWING NO. 241536 REV. A 2:1 2 SHEET 2 OF 2 1 AI 8 7 6 5 4 3 D C B A Durable Goods and Equipment Labeling Clear Gloss Polyester Overlaminate End Use Applications:
Compliance Labels Warning & Instructional Labels Nameplates Brand Identity Labels For Durable Goods including:
Outdoor Power Equipment Power Tools Appliances Electronics Recreational Vehicles Sporting Equipment Industrial Equipmentand more For Transportation including:
Automotive Aerospace Heavy Equipment For more information on FLEXcon's pressure-sensitive film solutions for Durable Goods and Equipment Labeling, contact your local Sales Representative or our Product Identification Business Team at (508) 885-8300. Product ID #: FLX000464 Product:
Benefits:
1.0 mil clear polyester film provides excellent clarity and label protection Overlaminating polyester resists temperature extremes, abrasion and chemical exposure for maximum label protection Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons Permanent, pressure-sensitive acrylic bonds well to base film label substrates Overlaminating adhesive offers excellent wetout and clarity This image is an example of how FLEXcon products may be used THERMLfilm SELECT 10852 Backed with a 44 lb. polycoated natural Kraft release liner ideal for roll-form converting Smooth, polycoated release liner provides good adhesive wetout for clarity of graphics UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials -
Component CSA accepted with specific thermal transfer ribbon(s) and printer(s) under CSA standard C22.2 No. 0.15-95 Last Modified On: Mar 10 2014 12:00AM 1 FLEXcon Industrial Park, Spencer, MA 01562-2642, Telephone (508) 885-8300 FAX (508) 885-8301 www.FLEXcon.com PRODUCT DATA VALUE TEST METHOD THERMLfilm SELECT 10852 Physical Properties Thickness (Mils[microns]) Dimensional Stability (%) Adhesion Properties Ultimate Peel from Acrylic Glass Polypropylene Stainless Steel Expected Shear Film Adhesive Liner No Shrinkage Observed Average Oz/In 45 29 5 34 1.0 (25) +/- 10%
0.8-0.9 (20-23) +/- 0.1 (3) 3.0 (76) +/- 10%
(N/m)
(495)
(319)
(55)
(374) Room Temp (hours) Tack (gm/sq cm) Expected Exterior Life Service Temperature Range Minimum Application Temperature Storage Stability 25 320 Two years
-40F to 302F (-40C to 150C) 50F (10C) Two years when stored at 70F (21C) and 50% relative humidity ASTM D 3652 (Modified for use with non-tape products) Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160F
(71C) ASTM D 903 (Modified for 72 hour dwell time) ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load ASTM D 2979 All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above. Last Modified On: 11/20/2015 Product Performance and Suitability 1 FLEXcon Industrial Park, Spencer, MA 01562-2642, Telephone (508) 885-8300 FAX (508) 885-8301 www.FLEXcon.com Product Construction Sheet FLX019450 - FLEXcon FLEXmark PM 200 WHITE TC-245 L-23 SPEC 50K-7 GENERAL DESCRIPTION:
This is a topcoated white polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with semi-bleached kraft release liner. UL/CSA RECOGNITION:
This product is UL recognized. For further information, please reference FLEXcons UL file number PGGU2.MH10170 and CSA file # 099214-L-000 class 7922-01 or contact your FLEXcon representative.
PRODUCT DATA VALUE TEST METHOD
PHYSICAL PROPERTIES Thickness Film: 2.0 (51) +/- 10 % ASTM D 3652 (Modified for mil (micron) Adhesive: 0.8-0.9 (20-23) +/- 0.1 (3) use with non-tape product) Liner: 3.1 (79) +/- 10 %
Dimensional Stability (%) No shrinkage observed On Al panel at 160F
(71C) for 24 hr.
ADHESION PROPERTIES*
Average Adhesion from oz/in (N/m) Stainless Steel 55 (605) ASTM D 903 (Modified for Acrylic 65 (715) 72 hr dwell time) Glass 63 (693) Polypropylene 6 (66) Expected Shear 50 ASTM D 3654 Method A (1 hr
(hours) dwell, 1 sq. in, 4 lb. load) Tack (gm) 1050 ASTM D 2979
* For guidance only, not to be used for setting specifications. Due to the custom nature of this product, the data presented are based on three or less production runs.
EXPECTED EXTERIOR LIFE Two years
SERVICE TEMPERATURE RANGE -40F to 302F (-40C to 150C)
MINIMUM APPLICATION TEMPERATURE 50F (10C)
STORAGE STABILITY Two years stored at 70F (21C) and 50% RH
FLEXmark is a registered trademark of FLEXcon Company, Inc. 09/16/2013 All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above. ________________________________________________________________________________________________________________________________________________________________________________________ FLEXcon, 1 FLEXcon INDUSTRIAL PARK, SPENCER, MA 01562-2642 PHONE 508 885-8200 FAX 508 885-8400 Product Performance and Suitability
1 | Attestation letter | Attestation Statements | 523.94 KiB | April 02 2024 / April 12 2024 |
BANNER *
more sensors, more solutions Letter of Authorization and Anti- Drug Statement Applicant Name: Banner Engineering Corp. Address: 9714 10th Avenue North Product Name: Industrial 60 GHz Radar Sensor Model Number: Q90R2-12040-6KDQ FCC ID: UE3Q90R2-6 We authorize: CETECOM Inc., to act on our behalf on all matters concerning the above named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-
Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? & Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Signature of Authoriz@d Person Filing:
am Title: Senior ManagetJRegulatory Compliance Date: 2024 MAR 15 Banner Engineering Corporation 9714 Tenth Avenue North e Minneapolis, MN 55441 Phone 763.544.3164 Fax 763.544.3213 * www.bannerengineering.com
1 | Attestation letter 2.911(D)(5) | Attestation Statements | 1005.83 KiB | April 02 2024 / April 12 2024 |
BANNER:
more sensors, more solutions Banner Engineering Corp 9714 Tenth Avenue North, Minneapolis, MN 55441 Federal Communication Commission 7435 Oakland Mills Road Columbia, MD 21046 2024 MAR 14 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)/(ii) FCC ID: UE3Q90R2-6 TO WHOM IT MAY CONCERN:
Hereby we certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Banner Engineering Corp is not identified on the Covered List as an entity producing covered equipment. Sincerely, Banner Engineering Corp ) 9714 Tenth Avenue North, MPLS, MN 5544 John McMahon Senior Manager, Regulatory Compliance E: jmcmahon@bannerengineering.com P: 763.513.3023 Banner Engineering Corporation 9714 Tenth Avenue North Minneapolis, MN 55441 Phone 763.544.3164 Fax 763.544.3213 www.bannerengineering.com
1 | Attestation letter 2.911(D)(7) | Attestation Statements | 393.49 KiB | April 02 2024 / April 12 2024 |
CELE2>
moresensors, moresolutions Banner Engineering Corp 9714 Tenth Avenue North, Minneapolis, MN 55441 Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 2024 MAR 14 Attestation Statement according to 2.911(d)(7) FCC ID: UE3Q90R2-6 TO WHOM IT MAY CONCERN:
Banner Engineering Corp with FCC Registration Number (FRN) 0008413221, certifies that, as of the date of this filing of the application with the TCB, Banner Engineering is our designated US agent for service of process for the above referenced FCC ID. Banner Engineering Corp accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. Banner Engineering Corp with FCC Registration Number (FRN) 0008413221, accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above referenced FCC ID. Sincerely Banner Engineering Corp 9714 Tenth Avenue North, MPLS, MN 55441 John McMahon Senior Manager, Regulatory Compliance E: jmcmahon@bannerengineering.com P: 763.513.3023 l,wish 9714 Tenth Avenue North Minneapolis. MN 55441 Phone 763.544.3164 Fax 763.544.3213 www.bannerengineering.com Banner Engineering Corporation
1 | cover letter | Cover Letter(s) | 430.79 KiB | April 02 2024 / April 12 2024 |
BANNER. more sensors, more solutions Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 2024 MAR 14 Subject: Request for Permanent Confidentiality FCC ID: UE3Q90R2-6 To Whom It May Concern:
In accordance with 0.457(d) and 0.459 of CFR 47, and KDB 726920, Banner Engineering Corp hereby requests permanent confidentiality for documents filed under the following exhibit types:
Block Diagram Schematic Diagram Part List Operational Description SO he These items contain detailed system and equipment description and related information about the product which Banner Engineering Corp considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Banner Engineering Corp also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, Name:
Title: Senior Manager, Regulatory Compliance Company Name: Banner Engineering Corp Address: 9714 10th Avenue North Banner Engineering Corporation 9714 Tenth Avenue North e Minneapolis, MN 55441 e Phone 763.544.3164 Fax 763.544.3213 www.bannerengineering.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2024-04-12 | 60000 ~ 61500 | FDS - Part 15 Field Disturbance Sensor | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2024-04-12
|
||||
1 | Applicant's complete, legal business name |
Banner Engineering Corporation
|
||||
1 | FCC Registration Number (FRN) |
0008413221
|
||||
1 | Physical Address |
9714 10th Ave North
|
||||
1 |
Minneapolis, Minnesota 55441
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@cetecom.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
UE3
|
||||
1 | Equipment Product Code |
Q90R2-6
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** M********
|
||||
1 | Title |
Senior Manager of Regulatory Compliance
|
||||
1 | Telephone Number |
763-5********
|
||||
1 | Fax Number |
763-5********
|
||||
1 |
j******@bannerengineering.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | FDS - Part 15 Field Disturbance Sensor | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 60 GHz Industrial Radar Presence Detector | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is peak EIRP. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CETECOM Inc.
|
||||
1 | Name |
M****** G******
|
||||
1 | Telephone Number |
408-5********
|
||||
1 |
m******@cetecom.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.255 | 60000.00000000 | 61500.00000000 | 0.0280000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC