FCC ID: 2A7WK04250BLE Cool Fans Sound Vibez (04250), Cool Fans Speaker (04250C1S, 04250C1, 04250C2, 04250C3, 04250TB)

USING COOL FANS SOUND VIBEZ T MT M Place Cool Fans Sound Vibez around your neck and turn it on. Turn off the fan before removing. s o u n d v i b e z s o u n d v i b e z USB CHARGING PORT STATUS INDICATOR POWER FANS COOL FANS SOUND VIBEZ INSTRUCTION MANUAL Cool Fans Sound Vibez is not a toy. Unlike some other Bluetooth hands free devices, Cool Fans Sound Vibez doesnt came with a microphone for voice conversation. Never try to use it for that purpose. To prevent damage or harm to those using this product and surrounding, please read all safety warnings before use. PRODUCT SPECIFICATIONS Operating Time (approximately):

Low speed Medium speed High speed Fans only Bluetooth & Fans 5 hours 4 hours 3.5 hours 2.5 hours 2 hours 1.25 hours Battery: Built in Li-ion rechargeable batteries 3.7V 2600mAh 9.62Wh

(non-replaceable) Input Power: DC 5V 1A (USB charging) Charging Time (approximately): 8 hours Accessory: USB charging cable CHARGING COOL FANS SOUND VIBEZ Use the provided USB cable to connect Cool Fans Sound Vibez to a power source such as AC USB adapter, portable charger or computer USB port. A red light will appear while Cool Fans Sound Vibez is charging. Remove the cable once the light turns off and it is fully charged. Never overcharge the Cool Fans Sound Vibez battery. The red light will flash when the battery is running low and the battery needs to be charged. POWER ON Press and hold the POWER button for 3 seconds. Power on sound and Pairing voice is heard. Blue light near the power button will begin to flash. BLUETOOTH SPEAKER PAIRING Make sure the device such as smart phone, tablet or computer you are using with Cool Fans Sound Vibez has Bluetooth capability and its Bluetooth function is turned on. Once Cool Fans Sound Vibez is turned on, it enters pairing mode and the blue light flashes. Look for Cool Fans on the Bluetooth device list and click connect. When Bluetooth speaker is connected successfully, the voice Connected is heard and the blue light will change from flashing to a steady non-flashing light. BLUETOOTH SPEAKER AUTO CONNECT & DISCOVERABLE If there is a device previously paired with the fan and its Bluetooth connectivity is turned on, the fan will try to connect to the device automatically. If the previously paired device is not found after 10 seconds, the light will flash red and blue alternatively. The fan will become discoverable for other Bluetooth device to pair. If Cool Fans Sound Vibez does not pair with a device after it has been turned on for 1 minute, the fan will exit pairing mode and turn off the Bluetooth function as well as the red and blue lights. A notification sound will be played to notify you. If you want to enable Bluetooth function again, you will need to power off the Cool Fans Sound Vibez and turn the power back on to enable the Bluetooth connectivity. DISABLE CURRENT PAIRING & PAIR WITH A NEW DEVICE To disconnect Cool Fans Sound Vibez from a paired device and pair it with another device, power off Cool Fans Sound Vibez then press and hold the POWER button for 5 seconds until the alternating red and blue flashing light is seen. To connect the fan to the new device, repeat the steps mentioned in BLUETOOTH speaker PAIRING. USING COOL FANS SOUND VIBEZ SAFETY PRECAUTIONS DISCONNECT BLUETOOTH SPEAKER PAIRING Turn off Bluetooth function on your device to disconnect with Cool Fans Sound Vibez. The Disconnected voice is heard. LIGHT INDICATION Status Blue Light Red Light Bluetooth Pairing Mode Device Connected Bluetooth Pairing Mode

(Discoverable for all device) Low Battery Charging Battery Battery fully charged

(Flash alternatively) FAN SPEED Cool Fans Sound Vibez has 3 fan speed levels which are Low, Medium and High. When the unit is turned on, toggle between different fan speed and turn off the fans by quickly pressing and releasing the FANS button. LIGHT MODES Cool Fans Sound Vibez has 3 light modes to choose from. When the unit is turned on, quickly press and release the POWER button to select between steady white lights, color changing lights and lights off. POWER OFF Press and hold the POWER button for 3 seconds to turn off Bluetooth connection, fans & light at the same time. When there is no Bluetooth connection and the fans and lights are both turned off, the Cool Fans Sound Vibez will auto turn off after 30 seconds to save power. DESK FAN SETUP To use Cool Fans Sound Vibez as a desk fan, place the fan with the POWER button facing upward on any flat surface and angle the fan arms as desired. When wearing or using Cool Fans Sound Vibez, always follow all safety precautions. WARNING: There is risk of serious injury if Cool Fans Sound Vibez is misused If Cool Fans Sound Vibez becomes overheated and begins to smoke, turn off the product immediately and discontinue use. If this occurs while charging, disconnect the power source and charging cable at once. Do not place small objects in the fan cages, as this may cause damage or a malfunction. Always keep fingers or hair away from fan cages. Immediately turn off Cool Fans Sound Vibez if hair becomes entangled in the fan blades. Keep personal belongings away with fan blades. Cool Fans Sound Vibez is not waterproof; don't use in rain or in a pool. If Cool Fans Sound Vibez becomes wet, then immediately turn it off and set aside until completely dry. Moisture from sweating may cause damage to the USB charging port. To prevent damage wipe off any moisture on the product as a result of sweat. Don't over bend or rotate the fan arms beyond 180, as this may damage the product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver BANZAI IS USED UNDER LICENSE BY FOCUS BRAND LTD. CONTENTS AND SPECIFICATIONS MAY VARY FROM THOSE ILLUSTRATED. is connected. 04250 TANG RONG ROAD, CHANGPING, DONGGUAN, CHINA ALL RIGHTS RESERVED MADE IN CHINA Consult the dealer or an experienced radio/ TV technician for help. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Banzai International Ltd is under license. Other trade-

marks and trade names are those of their respective owners. JUN.2022

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, |

including interference that may cause undesired operation. |

BANZAI INTERNATIONAL LIMITED CONTACT ADDRESS: Room D, 9/F, Phase II, HK Spinners Industrial Bld, No.601-603 Tai Nam West Street, Kowloon Tel : (852) 2370 7111 Fax : (852) 2125 0999 Attention:

Application Examiner Re: Request for confidentiality Applicant: Banzai International Limited FCC ID: 2A7WK04250BLE To whom it may concern, Permanent Confidentiality Request is hereby submitted by Banzai International Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) & 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

Schematics Detailed Block diagrams Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Banzai International Ltd to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) & 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:

Test setup photos Internal photos Rationale for request for confidentiality:

Banzai International Ltd has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.]

If you have questions or need further information, please contact the undersigned. Sincerely, Vicky Choi Assistant QA Manager Banzai International Limited

BANZAI INTERNATIONAL LIMITED Letter of Agency

"I, an officer of Banzai International Ltd. do hereby authorize Intertek Testing Services (Mr. Tim Lee / Herbert Wong / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice."

I further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 02 day August of 2022 _ Vicky Choi Printed Name Assistant QA Manager Title Remark: The person who signs this authorization letter must be the grantee contact of record in the Grantee Code data base.