FCC ID: ZK7MSERIES GSM/GPRS/UMIT/HSPA Module

i w e v r e v O e c a BAP M852 Version:

DocId:

02.000 M852_HD_v02.000 f r e t n I e r a w d r a H M852 Hardware Interface Overview 2 Document Name:

Version:

Date:

DocId:

Status M852 Hardware 02.000 2011-10-21 M852_HD_v02.000 Condential / Released Interface Overview GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD-

UCT") IS SUBJECT TO THE RELEASE NOTE PR OVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NO TE SHALL PREVAIL. TH IS DOCUMENT CON-

TAINS INFORMATION ON CINTERION PRODUCTS . THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT CINTERION'S DISCRETION. CINTERION WIRELESS MODULES GMBH GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS;

DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN

"AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CI CLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGA RDING ANY INFORMAT ION AND DATA PRO-

VIDED TO HIM IN THE CONTEXT OF THE DELI VERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. NTERION WIRELESS MODULES GMBH DIS-

Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con-

tents and communication thereof to others without express authorizat ion are prohibited. Oenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright ?2011, Cinterion Wireless Modules GmbH Trademark Notice Microsoft and Windows are either r egistered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other re gistered trademarks or trademarks mentioned in this document are property of their respective owners. M852_HD_v02.000 Condential / Released Page 2 of 47 2011-10-21 M852 Hardware Interface Overview Contents 46 Contents 1 Introduction.................................................................................................................6 Related Documents...........................................................................................6 1.1 Terms and Abbreviations...................................................................................6 1.2 Regulatory and Type Approval Information.......................................................9 1.3 1.3.1 Directives and Standards......................................................................9 SAR requirements specic to portable mobiles..................................12 1.3.2 SELV Requirements...........................................................................13 1.3.3 1.3.4 Safety Precautions..............................................................................13 Product Concept.......................................................................................................15 2.1 Key Features at a Glance................................................................................15 2.2 PH8/PH8-P System Overview.........................................................................18 Application Interface.................................................................................................19 Operating Modes.............................................................................................20 3.1 3.2 Power Supply...................................................................................................21 USB Interface...................................................................................................22 3.3 Serial Interface ASC0......................................................................................23 3.4 3.5 UICC/SIM/USIM Interface................................................................................25 Analog Audio Interface.....................................................................................27 3.6 3.7 Digital Audio Interface......................................................................................27 GPS Receiver.............................................................................................................28 Antenna Interfaces....................................................................................................29 GSM/UMTS Antenna Interface........................................................................29 5.1 5.1.1 Antenna Installation............................................................................29 5.1.2 Antenna Connector.............................................................................30 5.2 GPS Antenna Interface....................................................................................34 Mechanics..................................................................................................................35 Mechanical Dimensions of PH8/PH8-P...........................................................35 6.1 Mounting PH8/PH8-P to the Application Platform............................................37 6.2 6.3 Board-to-Board Application Connector............................................................37 Sample Application...................................................................................................41 Reference Approval..................................................................................................43 8.1 Reference Equipment for Type Approval.........................................................43 8.2 Compliance with FCC and IC Rules and Regulations.....................................44 Appendix....................................................................................................................45 9.1 List of Parts and Accessories...........................................................................45 2 3 4 5 6 7 8 9 M852_HD_v02.000 Condential / Released Page 3 of 47 2011-10-21 M852 Hardware Interface Overview Tables 46 Tables Table 1:

Table 2:

Table 3:

Table 4:

Table 5:

Table 6:

Table 7:

Table 8:

Table 9:

Table 10:

Table 11:

Table 12:

Table 13:

Table 14:

Table 15:

Table 16:

Table 17:

Directives......................................................................................................... 9 Standards of North American type approval.................................................... 9 Standards of European type approval.............................................................. 9 Requirements of quality................................................................................. 10 Standards of the Ministry of Information Industry of the People Republic of China............................................................................ 10 Toxic or hazardous substances or elements with dened concentration limits............................................................................................................... 11 Overview of operating modes........................................................................ 20 DCE-DTE wiring of ASC0.............................................................................. 24 Signals of the SIM interface (board-to-board connector)............................... 25 Return loss in the active band........................................................................ 29 Product specications of PH8/PH8-P antenna connectors............................ 30 Material and nish of PH8/PH8-P antenna connectors and recommended plugs.............................................................................................................. 31 Ordering information for Hirose U.FL Series.................................................. 33 Technical specications of Molex board-to-board connector......................... 38 List of parts and accessories.......................................................................... 45 Molex sales contacts (subject to change)...................................................... 46 Hirose sales contacts (subject to change)..................................................... 46 M852_HD_v02.000 Condential / Released Page 4 of 47 2011-10-21 M852 Hardware Interface Overview Figures 46 Figures Figure 1:

Figure 2:

Figure 3:

Figure 4:

Figure 5:

Figure 6:

Figure 7:

Figure 8:

Figure 9:

Figure 10:

Figure 11:

Figure 12:

Figure 13:

Figure 14:

Figure 15:

M852 system overview................................................................................... 18 USB circuit..................................................................................................... 22 Serial interface ASC0..................................................................................... 23 UICC/SIM/USIM interface.............................................................................. 26 Mechanical dimensions of PH8/PH8-P antenna connectors.......................... 30 U.FL-R-SMT connector with U.FL-LP-040 plug............................................. 31 U.FL-R-SMT connector with U.FL-LP-066 plug............................................. 31 Specications of U.FL-LP-(V)-040(01) plug................................................... 32 M852 top and bottom view.............................................................................. 35 Dimensions of M852 (all dimensions in mm).................................................. 36 Mating board-to-board connector 53748-0808 on application....................... 38 Molex board-to-board connector 52991-0808 on PH8/PH8-P....................... 39 Mating board-to-board connector 53748-0808 on application....................... 40 M852 sample application................................................................................ 42 Reference equipment for type approval......................................................... 43 M852_HD_v02.000 Condential / Released Page 5 of 47 2011-10-21 M852 Hardware Interface Overview 1 Introduction 14 1 Introduction The document1 describes the hardware of the M852 module, designed to connect to a cellular device application and the air interface. It helps you quickly retrieve interface specica-

tions, electrical and mechanical details and information on the requirements to be considered for integrating further components. Related Documents 1.1

[1] M852 AT Command Set

[2] M852 Release Notes

[3] DSB75 Support Box - Evaluation Kit for Cinterion Wireless Modules 1.2 Terms and Abbreviations Abbreviation AGPS ANSI AMR ARP B2B BB BEP BTS CB or CBM CE CS CS CSD CTM DAC DCS DL DRX DSB Description Assisted GPS American National Standards Institute Adaptive Multirate Antenna Reference Point Board-to-board connector Baseband Bit Error Probability Base Transceiver Station Cell Broadcast Message Conformit? Europne (European Conformity) Coding Scheme Circuit Switched Circuit Switched Data Cellular Text Modem Digital-to-Analog Converter Digital Cellular System Download Discontinuous Reception Development Support Board 1. The document is eective only if listed in the appropriate Release Notes as part of the technical documentation delivered with your Cinterion Wireless Modules product. M852_HD_v02.000 Condential / Released Page 6 of 47 2011-10-21 M852 Hardware Interface Overview 1.2 Terms and Abbreviations 14 Abbreviation DSP DTMF DTX EDGE EFR EGSM EMC ERP ESD ETS ETSI FCC FDD FDMA FR GPRS GPS GSM HiZ HSDPA HR I/O IF IMEI ISO ITU kbps LED Mbps MCS MO MS MT NMEA NTC PBCCH Description Digital Signal Processor Dual Tone Multi Frequency Discontinuous Transmission Enhanced Data rates for GSM Evolution Enhanced Full Rate Extended GSM Electromagnetic Compatibility Eective Radiated Power Electrostatic Discharge European Telecommunication Standard European Telecommunications Standards Institute Federal Communications Commission (U.S.) Frequency Division Duplex Frequency Division Multiple Access Full Rate General Packet Radio Service Global Positioning System Global Standard for Mobile Communications High Impedance High Speed Downlink Packet Access Half Rate Input/Output Intermediate Frequency International Mobile Equipment Identity International Standards Organization International Telecommunications Union kbits per second Light Emitting Diode Mbits per second Modulation and Coding Scheme Mobile Originated Mobile Station, also referred to as TE Mobile Terminated National Marine Electronics Association Negative Temperature Coecient Packet Switched Broadcast Control Channel M852_HD_v02.000 Condential / Released Page 7 of 47 2011-10-21 M852 Hardware Interface Overview 1.2 Terms and Abbreviations 14 Abbreviation PCB PCL PCM PCS PDU PS PSK QAM R&TTE RF ROPR RTC Rx SAR SELV SIM SLIC SMPL SMS SNR SRAM SRB SUPL TDMA TE TPC TS TTFF Tx UL UMTS URC USB UICC USIM WCDMA Description Printed Circuit Board Power Control Level Pulse Code Modulation Personal Communication System, also referred to as GSM 1900 Protocol Data Unit Packet Switched Phase Shift Keying Quadrature Amplitude Modulation Radio and Telecommunication Terminal Equipment Radio Frequency Radio Output Power Reduction Real Time Clock Receive Direction Specic Absorption Rate Safety Extra Low Voltage Subscriber Identication Module Subscriber Line Interface Circuit Sudden Momentary Power Loss Short Message Service Signal-to-Noise Ratio Static Random Access Memory Signalling Radio Bearer Secure User Plane Location Time Division Multiple Access Terminal Equipment Transmit Power Control Technical Specication Time To First Fix Transmit Direction Upload Universal Mobile Telecommunications System Unsolicited Result Code Universal Serial Bus USIM Integrated Circuit Card UMTS Subscriber Identication Module Wideband Code Division Multiple Access M852_HD_v02.000 Condential / Released Page 8 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 1.3 Regulatory and Type Approval Information Directives and Standards 1.3.1 M852 has been designed to comply with the directives and standards listed below. It is the responsibility of the application manufacturer to ensure compliance of the nal product with all provisions of the applicable directives and standards as well as with the technical spec-

ications provided in the "M852 Hardware Interface Description". 1 Table 1: Directives 99/05/EC 2002/95/EC Directive of the European Parliament and of the council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (in short referred to as R&TTE Direc-

tive 1999/5/EC). The product is labeled with the CE conformity mark Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain haz-

ardous substances in electrical and electronic equipment

(RoHS) Table 2: Standards of North American type approval CFR Title 47 Code of Federal Regulations, Part 22, Part 24 ; US Equipment Authorization FCC Evaluating Compliance with FCC Guidelines for Human Exposure to Radio-

frequency Electromagnetic Fields Product Safety Certication (Safety requirements) Overview of PCS Type certication review board Mobile Equipment Type Certication and IMEI control PCS Type Certication Review board (PTCRB) Canadian Standard OET Bulletin 65

(Edition 97-01) UL 60 950-1 NAPRD.03 V5.8 RSS132, RSS133, RSS13 Table 3: Standards of European type approval 3GPP TS 51.010-1 Digital cellular telecommunications system (Release 7); Mobile Station

(MS) conformance specication;

ETSI EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized standard for GCF-CC V3.43.1 ETSI EN 301 489-01 V1.8.1 mobile stations in the GSM 900 and DCS 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) Global Certication Forum - Certication Criteria Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electro-

magnetic Compatibility (EMC) standard for radio equipment and services;

Part 1: Common Technical Requirements 1. Manufacturers of applications which can be used in t he US shall ensure that their applications have a PTCRB approval. For this purpose they can refer to the PTCRB approval of the respective module. M852_HD_v02.000 Condential / Released Page 9 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 Table 3: Standards of European type approval ETSI EN 301 489-03 V1.4.1 Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electro-

magnetic Compatibility (EMC) standard for radio equipment and services;

Part 3: Specic conditions for Short-Range Devices (SRD) operating on fre-

quencies between 9 kHz and 40 GHz Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electro-

magnetic Compatibility (EMC) standard for radio equipment and services;

Part 7: Specic conditions for mobile and portable radio and ancillary equip-

ment of digital cellular radio telecommunications systems (GSM and DCS) Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electro-

magnetic Compatibility (EMC) standard for radio equipment and services;

Part 24: Specic conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cel-

lular networks; Part 1: Harmonized EN for IMT-2000, introduction and com-

mon requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cel-

lular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread

(UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz fre-

quency range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive Assessment of electronic and electrical equipment related to human expo-

sure restrictions for electromagnetic elds (0 Hz - 300 GHz) Safety of information technology equipment ETSI EN 301 489-07 V1.3.1 ETSI EN 301 489-24 V1.4.1 EN 301 908-01 V3.2.1 EN 301 908-02 V3.2.1 EN 300 440-02 V1.3.1 EN 62311:2008 IEC/EN 60950-1:2006 Table 4: Requirements of quality IEC 60068 DIN EN 60529 Environmental testing IP codes Table 5: Standards of the Ministry of Information Industry of the People?s Republic of China SJ/T 11363-2006 equirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products? (2006-06).

?Marking for Control of Pollution Caused by Electronic Information Products?(2006-06). SJ/T 11364-2006 According to the ?Chinese Administration on the Control of Pollution caused by Electronic Information Products?

(ACPEIP) the EPUP, i.e., Environmental Protection Use Period, of this product is 20 years as per the symbol shown here, unless otherwise marked. The EPUP is valid only as long as the product is operated within the operating limits described in the Cinterion Hardware Interface Description. Please see Table 6 for an overview of toxic or hazardous substances or ele-

ments that might be contained in product parts in concentrations above the limits dened by SJ/T 11363-2006. M852_HD_v02.000 Condential / Released Page 10 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 Table 6: Toxic or hazardous substances or elements with dened concentration limits M852_HD_v02.000 Condential / Released Page 11 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 SAR requirements specic to portable mobiles 1.3.2 Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM module must be in accordance with the guidelines for human exposure to radio frequency energy. This requires the Specic Absorption Rate (SAR) of portable M852 based applications to be evaluated and approved for compliance with national and/or international regulations. Since the SAR value varies signicantly with the individual product design manufacturers are advised to submit their product for approval if designed for portable use. For European and US-

markets the relevant directives are mentioned below. It is the responsibility of the manufacturer of the nal product to verify whether or not further standards, recommendations or directives are in force outside these areas. Products intended for sale on US markets ES 59005/ANSI C95.1Considerations for evaluat ion of human exposure to electromagnetic elds (EMFs) from mobile telecommunication equipment (MTE) in the frequency range 30MHz - 6GHz Products intended for sale on European markets EN 50360 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic elds (300MHz - 3GHz) IMPORTANT:

Manufacturers of portable applications based on M852 modules are required to have their nal product certied and apply for their own FCC Grant and Industry Canada Certicate related to the specic portable mobile. M852_HD_v02.000 Condential / Released Page 12 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 SELV Requirements 1.3.3 The power supply connected to the M852 module shall be in compliance with the SELV requirements dened in EN 60950-1. Safety Precautions 1.3.4 The following safety precautions must be observed during all phases of the operation, usage, service or repair of any cellular terminal or mobile incorporating M852. Manufacturers of the cellular terminal are advised to convey the following safety information to users and oper-

ating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Cinterion Wireless Modules assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch the cellular terminal or mobile o, if instructed to do so by the guide-

lines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be aected by interference from cellular terminals or mobiles placed close to the device. If in doubt about potential danger, contact the physician or the manufac-

turer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their hand-held mobile away from the pacemaker, while it is on. Switch o the cellular terminal or mobile before boarding an aircraft. Make sure it can-

not be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the oender, legal action, or both. Do not operate the cellular terminal or mobile in the presence of ammable gases or fumes. Switch o the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electri-

cal equipment in potentially explosive atmospheres can constitute a safety hazard. Your cellular terminal or mobile receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch o the cellular terminal or mobile wherever forbidden, or when you suspect that it may cause interference or danger. Road safety comes rst! Do not use a hand-held cellular terminal or mobile when driv-

ing a vehicle, unless it is securely mounted in a holder for speakerphone operation. Before making a call with a hand-held terminal or mobile, park the vehicle. Speakerphones must be installed by qualied personnel. Faulty installation or opera-

tion can constitute a safety hazard. M852_HD_v02.000 Condential / Released Page 13 of 47 2011-10-21 M852 Hardware Interface Overview 1.3 Regulatory and Type Approval Information 14 IMPORTANT!

Cellular terminals or mobiles operate using radio signals and cellular networks. Because of this, connection cannot be guaranteed at all times under all conditions. Therefore, you should never rely solely upon any wireless device for essential com-

munications, for example emergency calls. Remember, in order to make or receive calls, the cellular terminal or mobile must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, xed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in the cellular termi-

nal or mobile. Bear in mind that exposure to excessive levels of noise can cause physical damage to users! With regard to acoustic shock, the cellular application must be designed to avoid unintentional increase of amplication, e.g. for a highly sensitive earpiece. A pro-

tection circuit should be implemented in the cellular application. M852_HD_v02.000 Condential / Released Page 14 of 47 2011-10-21 M852 Hardware Interface Overview 2 Product Concept 18 2 2.1 Product Concept Key Features at a Glance Feature General Frequency bands Implementation GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz UMTS/HSPA+:

M852: Five band, 800/850/900 2/1900/2100MHz GSM class Small MS Output power (according to Release 99) Class 4 (+33dBm ?dB) for EGSM850 Class 4 (+33dBm ?dB) for EGSM900 Class 1 (+30dBm ?dB) for GSM1800 Class 1 (+30dBm ?dB) for GSM1900 Class E2 (+27dBm ?3dB) for GSM 850 8-PSK Class E2 (+27dBm ?3dB) for GSM 900 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI Class 3 (+24dBm +1/-3dB) for UMTS 1900,WCDMA FDD BdII Class 3 (+24dBm +1/-3dB) for UMTS AWS, WCDMA FDD BdIV1 Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII2 Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdVI Power supply 3.3V < VBATT+ < 4.2V Operating temperature

(board temperature) Normal operation: -30 to +85 Restricted operation: -40?C to +95?C Physical RoHS HSPA features 3GPP Release 6, 7 UMTS features 3GPP Release 4 Dimensions: 33.9mm x 50mm x 3.1mm Weight: approx. 9.5g All hardware components fully compliant with EU RoHS Directive DL 14.4Mbps, UL 5.7Mbps UE CAT. 1-12 supported Compressed mode (CM) supported according to 3GPP TS25.212 PS data rate ?384 kbps DL / 384 kbps UL CS data rate ?64 kbps DL / 64 kbps UL M852_HD_v02.000 Condential / Released Page 15 of 47 2011-10-21 M852 Hardware Interface Overview 2.1 Key Features at a Glance 18 Feature GSM / GPRS / EGPRS features Data transfer Implementation Full PBCCH support EDGE E2 power class for 8 PSK GPRS:

? Multislot Class 12

?

? Mobile Station Class B

? Coding Scheme 1 ?4 EGPRS:

? Multislot Class 12

?

? Downlink coding schemes ? CS 1-4, MCS 1-9

? Uplink coding schemes ? CS 1-4, MCS 1-9

?

?

?

?

?

? NACC, extended UL TBF

? Mobile Station Class B CSD:

?

?

? USSD Point-to-point MT and MO Cell broadcast Text and PDU mode SRB loopback and test mode B 8-bit, 11-bit RACH PBCCH support 1 phase/2 phase access procedures Link adaptation and IR V.110, RLP, non-transparent 14.4kbps SMS GPS Features Protocol Modes General Software AT commands SIM Application Toolkit Audio Firmware update Interfaces Module interface Antenna NMEA Standalone GPS Assisted GPS

- Control plane - E911

- User plane - gpsOneXTRA?

Power saving modes Power supply for active GPS antenna supported Hayes, 3GPP TS 27.007 and 27.005, and proprietary Cinterion Wireless Modules commands SAT Release 99 Audio speech codecs GSM: AMR, EFR, FR, HR 3GPP: AMR Speakerphone operation, echo cancellation, noise suppression, 9 ringing tones, TTY support Generic update from host application over ASC0 or USB 80-pin board-to-board connector 50Ohms. Main GSM/UMTS antenna, UMTS diversity antenna, GPS antenna (active/passive) M852_HD_v02.000 Condential / Released Page 16 of 47 2011-10-21 M852 Hardware Interface Overview 2.1 Key Features at a Glance 18 Feature USB Serial interface UICC interface Status Audio Power on/o, Reset Power on/o Reset Implementation USB 2.0 High S pineteedrf a(4c8e0, MFublilt /Ssp) edeedv i(c1e2Mbit/s) compliant ASC0:

?

8-wire modem interface with status and control lines, unbalanced, asynchronous Adjustable baud rates from 9,600bps up to 921,600bps Supports RTS0/CTS0 hardware ow control

?

?

? Multiplex ability according to GSM 07.10 Multiplexer Protocol Supported chip cards: UICC/SIM/USIM 3V, 1.8V Signal line to indicate network connectivity state 1 analog interface with microphone feeding 1 digital interface: PCM or I2S Switch-on by hardware signal IGT Switch-o by AT command (AT^SMSO) Automatic switch-o in case of critical temperature or voltage conditions Orderly shutdown and reset by AT command Emergency-o Emergency-o by hardware signal EMERG_OFF if IGT is not active Special Features Phonebook TTY/CTM support Antenna Evaluation kit DSB75 SIM and phone Integrated CTM modem SAIC (Single Antenna Interference Cancellation) / DARP (Downlink Advanced Receiver Performance) Rx diversity (receiver type 3i - 16-QAM)3 DSB75 Evaluation Board designed to test and type approve Cinterion Wireless Modules and provide a sample conguration for application engineering. A special adapter is required to connect the module to the DSB75. 1. AWS UMTS/HSPA+ band IV supported by PH8 only. 2. 900MHz UMTS/HSPA+ band VIII supported by M852 only. Band VIII however, is not supported by the UMTS Rx diversity antenna. 3. UMTS Rx diversity antenna does not support UMTS/HSPA+ band VIII. M852_HD_v02.000 Condential / Released Page 17 of 47 2011-10-21 M852 Hardware Interface Overview 2.2 M852 System Overview 18 2.2 M852 System Overview GPS antenna GSM/UMTS antenna UMTS diversity antenna GPS GSM/UMTS Module USB Serial ASC0 UICC Analog audio Digital audio Power supply RTC IGT, Emergency O Net state/

status e c a f r e n t i m e d o M SIM card Host application n o i t a c

) T X E V

(

i l p p a

) D N I _ R W P

(

n o i t i a c d n i r e w o P PCM or I2S codec r o f r e w o P Application system overview Figure 1: M852 or On/O M852_HD_v02.000 Condential / Released Page 18 of 47 2011-10-21 M852 Hardware Interface Overview 3 Application Interface 28 3 Application Interface M852 is equipped with an 80-pin board-to-board connector that connects to the external application. The host interface incorporates several sub-interfaces described in the following sections:

? Operating modes - see Section 3.1

? Power supply - see Section 3.2

? Serial interface USB - see Section 3.3

? Serial interface ASC0 - Section 3.4

? UICC/SIM/USIM interface - see Section 3.5

? Analog audio interface - see Section 3.6

? Digital audio interface (PCM or I2S) - see Section 3.7 M852_HD_v02.000 Condential / Released Page 19 of 47 2011-10-21 M852 Hardware Interface Overview 3.1 Operating Modes 28 Operating Modes 3.1 The table below briey summarizes the various operating modes referred to in the following chapters. Table 7: Overview of operating modes Mode Normal operation Function GSM /

GPRS / UMTS /

HSPA SLEEP GSM /

GPRS / UMTS /

HSPA IDLE GSM TALK/

GSM DATA Power saving set automatically when no call is in progress and the USB connection is suspended by host or not present and no active commu-

nication via ASC0. Power saving disabled (see [1]: AT^SCFG "MEopMode/

PwrSave",<PwrSaveMode>) or an USB connection not suspended, but no call in progress. Connection between two subscribers is in progress. Power consump-

tion depends on the GSM network coverage and several connection settings (e.g. DTX o/on, FR/EFR/HR, hopping sequences and antenna connection). The following applies when power is to be mea-

sured in TALK_GSM mode: DTX o, FR and no frequency hopping. GPRS data transfer in progress. Power consumption depends on net-

work settings (e.g. power control level), uplink / downlink data rates and GPRS conguration (e.g. used multislot settings). EGPRS data transfer in progress. Power consumption depends on net-

work settings (e.g. power control level), uplink / downlink data rates and EGPRS conguration (e.g. used multislot settings). UMTS data transfer in progress. Power consumption depends on net-

work settings (e.g. TPC Pattern) and data transfer rate. HSPA data transfer in progress. Power consumption depends on net-

work settings (e.g. TPC Pattern) and data transfer rate. GPRS DATA EGPRS DATA UMTS TALK/

UMTS DATA HSPA DATA Power Down Airplane mode Normal shutdown after sending the AT^SMSO command. Only a voltage regulator is active for powering the RTC. Software is not active. Interfaces are not accessible. Operating volt-

age (connected to BATT+) remains applied. Airplane mode shuts down the radio part of the module, causes the module to log o from the GSM/GPRS network and disables all AT commands whose execution requires a radio connection. Airplane mode can be controlled by AT command (see [1]). M852_HD_v02.000 Condential / Released Page 20 of 47 2011-10-21 M852 Hardware Interface Overview 3.2 Power Supply 28 3.2 Power Supply M852 needs to be connected to a power supply at the board-to-board connector - 5 lines each BATT+ and GND. The power supply of PH8/PH8-P has to be a single voltage source at BATT+. It must be able to provide the peak current during the uplink transmission. All key functions for supplying power to the device are handled by the power management IC. It provides the following features:

? Stabilizes the supply voltages for the baseband using switching regulators and low drop lin-

ear voltage regulators.

? Switches the module's power voltages for the power-up and -down procedures.

? Delivers, across the VEXT line, a regulated voltage for an external application. This voltage is not available in Power-down mode and can be reduced via AT command to save power.

? SIM switch to provide SIM power supply. M852_HD_v02.000 Condential / Released Page 21 of 47 2011-10-21 M852 Hardware Interface Overview 3.3 USB Interface 28 3.3 USB Interface M852 supports a USB 2.0 High Speed (480Mbit/s) device interface that is Full Speed

(12Mbit/s) compliant. The USB interface is primarily intended for use as command and data interface and for downloading rmware. The USB host is responsible for supplying the VUSB_IN line. This line is for voltage detection only. The USB part (driver and transceiver) is supplied by means of BATT+. This is because M852 is designed as a self-powered device compliant with the niversal Serial Bus Specication Revision 2.0?1. Module VREG (3V075) lin. reg. B2B USB part1) VBUS DP DN Detection only Host wakeup BATT+

GND VUSB_IN USB_DP2) USB_DN2) RING0 WAKEUP 1) All serial and pull-up resistors for data lines are implemented. 2) If the USB interface is operated in High Speed mode (480MHz), it is recommended to take special care routing the data lines USB_DP and USB_DN. Application layout should in this case implement a dierential impedance of 90Ohm for proper signal integrity. Figure 2: USB circuit To properly connect the module's USB interface to the host a USB 2.0 compatible connector is required. Furthermore, the USB modem driver distributed with M852 needs to be in-

stalled. While the USB connection is active, the module will not change into SLEEP Mode. To enable switching into SLEEP mode the USB host must bring its USB interface into Suspend state (see niversal Serial Bus Specication Revisi n 2.0?1 for a description of the Suspend state). On incoming calls PH8/PH8-P will then generate a remote wake up request to resume the USB connection (active low). If congured for SDPORT=6, i.e., if using a CDC ACM compatible USB driver on the host system, a selective suspend on the USB host may not be supported and the module may therefore not be able to change into SLEEP mode. As an alternative to the regular USB remote wakeup mechanism it is possible to employ the RING0 or WAKEUP line to wake up the host application. The benet is that the RING0 or WAKEUP lines can wake up the host application in case of incoming calls or other events sig-

nalized by URCs while the USB interface is suspended or shut down. 1. The specication is ready for download on http://www.usb.org/developers/docs/

M852_HD_v02.000 Condential / Released Page 22 of 47 2011-10-21 M852 Hardware Interface Overview 3.4 Serial Interface ASC0 28 3.4 Serial Interface ASC0 M852 oers an 8-wire unbalanced, asynchronous modem interface ASC0 conforming to ITU-T V.24 protocol DCE signalling. The electrical characteristics do not comply with ITU-T V.28. The signicant levels are 0V (for low data bit or active state) and 1.8V (for high data bit or inactive state). M852 is designed for use as a DCE. Based on the conventions for DCE-DTE connections it communicates with the customer application (DTE) using the following signals:

? Port TXD @ application sends data to the module?s TXD0 signal line

? Port RXD @ application receives data from the module?s RXD0 signal line Figure 3: Serial interface ASC0 Features:

?

Includes the data lines TXD0 and RXD0, the status lines RTS0 and CTS0 and, in addition, the modem control lines DTR0, DSR0, DCD0 and RING0.

? ASC0 is designed for controlling GSM/UMTS voice calls, transferring data and for control-

ling the module with AT commands.

? Full multiplexing capability allows the interface to be partitioned into virtual channels.

? The RING0 signal serves to indicate incoming calls and ot her types of URCs (Unsolicited Result Code). It can also be used to send puls es to the host application, for example to wake up the application from power saving state. See [1] for details on how to congure the RING0 line by AT^SCFG.

? Congured for 8 data bits, no parity and 1 stop bit.

? ASC0 can be operated at xed bit rates from 9600bps up to 921600bps.

? Supports RTS0/CTS0 hardware ow control.

? Wake up from SLEEP mode by RTS0 activation (high to low transition). Note. If the ASC0 serial interface is the application only interface, it is suggested to connect test points on the USB signal lines as a potential tracing possibility. M852_HD_v02.000 Condential / Released Page 23 of 47 2011-10-21 M852 Hardware Interface Overview 3.4 Serial Interface ASC0 28 Table 8: DCE-DTE wiring of ASC0 V.24 circuit DCE 103 104 105 106 108/2 107 109 125 Line function TXD0 RXD0 RTS0 CTS0 DTR0 DSR0 DCD0 RING0 Signal direction Input Output Input Output Input Output Output Output DTE Line function TXD RXD RTS CTS DTR DSR DCD RING Signal direction Output Input Output Input Output Input Input Input M852_HD_v02.000 Condential / Released Page 24 of 47 2011-10-21 M852 Hardware Interface Overview 3.5 UICC/SIM/USIM Interface 28 UICC/SIM/USIM Interface 3.5 M852 has an integrated UICC/SIM/USIM interface compatible with the 3GPP 31.102 and ETSI 102 221. This is wired to the host interface in order to be connected to an external SIM card holder. Six pins on the board-to-board connector are reserved for the SIM interface. The UICC/SIM/USIM interface supports 3V and 1.8V SIM cards. The CCIN signal serves to detect whether a tray (with SIM card) is present in the card holder. Using the CCIN signal is mandatory for compliance with the GSM 11.11 recommendation if the mechanical design of the host application allows the user to remove the SIM card during oper-

ation. To take advantage of this feature, an appropriate SIM card detect switch is required on the card holder. For example, this is true for the model supplied by Molex, which has been test-

ed to operate with M852 and is part of the Cinterion reference equipment submitted for type approval. See Chapter 9 for Molex ordering numbers. Table 9: Signals of the SIM interface (board-to-board connector) Signal CCGND Separate ground connection for SIM card to improve EMC. Description Be sure to use this ground line for the SIM interface rather than any other ground line or plane on the module. Chipcard clock CCCLK CCVCC SIM supply voltage. CCIO CCRST CCIN Serial data line, input and output. Chipcard reset Input on the baseband processor for detecting a SIM card tray in the holder. If the SIM is removed during operation the SIM interface is shut down immediately to prevent destruc-

tion of the SIM. The CCIN signal is active low. The CCIN signal is mandatory for applications that allow the user to remove the SIM card during operation. The CCIN signal is solely intended for use with a SIM card. It must not be used for any other purposes. Failure to comply with this requirement may invalidate the type approval of PH8/

PH8-P. Note: No guarantee can be given, nor any liability accepted, if loss of data is encountered after removing the SIM card during operation. Also, no guarantee can be given for properly initializ-

ing any SIM card that the user inserts after having removed the SIM card during operation. In this case, the application must restart M852. M852_HD_v02.000 Condential / Released Page 25 of 47 2011-10-21 M852 Hardware Interface Overview 3.5 UICC/SIM/USIM Interface 28 open: Card removed closed: Card inserted 1n SIM /

UICC CCIN CCRST CCCLK CCGND CCIO r o t c e n n o c d r a o b

-

o t

-

d r a o B Module CCVCC 220n Figure 4: UICC/SIM/USIM interface The total cable length between the board-to-board connector pins on M852 and the pads of the external SIM card holder must not exceed 100mm in order to meet the specications of 3GPP TS 51.010-1 and to satisfy the requirements of EMC compliance. To avoid possible cross-talk from the CCCLK signal to the CCIO signal be careful that both lines are not placed closely next to each other. A useful approach is using the CCGND line to shield the CCIO line from the CCCLK line. M852_HD_v02.000 Condential / Released Page 26 of 47 2011-10-21 M852 Hardware Interface Overview 3.6 Analog Audio Interface 28 Analog Audio Interface 3.6 M852 has an analog audio interface with a balanced analog microphone input and a bal-

anced analog earpiece output. A supply voltage and an analog ground connection are provided at dedicated lines. M852 oers eight audio modes which can be selected with the AT^SNFS command. The electrical characteristics of the voiceband part vary with the audio mode. For example, sending and receiving amplication, sidetone paths, noise suppression etc. depend on the selected mode and can in parts be altered with AT commands (except for mode 1). When shipped from factory, all audio parameters of M852 are set to audio mode 1. This is the default conguration optimised for the Votronic HH-SI-30.3/V1.1/0 handset. Audio mode 1 has x parameters which cannot be modied. To adjust the settings of the Votronic handset simply change to another audio mode. 3.7 Digital Audio Interface M852 supports a digital audio interface that can be employed either as pulse code mod-

ulation or as inter IC sound interface. Operation of these interface variants is mutually exclu-

sive. M852_HD_v02.000 Condential / Released Page 27 of 47 2011-10-21 M852 Hardware Interface Overview 4 GPS Receiver 28 4 GPS Receiver M852 integrates a GPS receiver that of fers the full performance of GPS technology. The GPS receiver is able to continuously track all satellites in view, thus providing accurate satellite position data. The integrated GPS receiver supports the NMEA protocol via USB or ASC0 interface. NMEA is a combined electrical and data specication for communication between various (marine) electronic devices including GPS receivers. It has been dened and controlled by the US-

based National Marine Electronics Association. For more information on the NMEA Standard please refer to http://www.nmea.org. Depending on the receiver knowledge of last position, current time and ephemeris data, the receiver startup time (i.e., TTFF = Time-To-First-Fix) may vary: If the receiver has no knowl-

edge of its last position or time, a startup takes considerably longer than if the receiver has still knowledge of its last position, time and almanac or has still access to valid ephimeris data and the precise time. By default, the GPS receiver is switched o. It has to be switched on and congured using AT commands. For more information on how to control the GPS interface via the AT command AT^SGPSC see [1]. M852_HD_v02.000 Condential / Released Page 28 of 47 2011-10-21 M852 Hardware Interface Overview 5 Antenna Interfaces 34 5 Antenna Interfaces GSM/UMTS Antenna Interface 5.1 The M852 GSM/UMTS antenna interface comprises a main GSM/UMTS antenna as well as an optional UMTS Rx diversity antenna to improve signal reliability and quality1. The inter-

face has an impedance of 50. M852 is capable of sustaining a total mismatch at the antenna interface without any damage, even when transmitting at maximum RF power. The external antenna must be matched properly to achieve best performance regarding radi-

ated power, DC-power consumption, modulation accuracy and harmonic suppression. Match-

ing networks are not included on the M852 PCB and should be placed in the host application, if the antenna does not have an impendance of 50. Regarding the return loss M852 provides the following values in the active band:

Table 10: Return loss in the active band State of module Receive Transmit Idle Return loss of module

> 8dB not applicable

< 5dB Recommended return loss of application

> 12dB

> 12dB not applicable The connection of the antenna or other equipment must be decoupled from DC voltage. This is necessary because the antenna connector is DC coupled to ground via an inductor for ESD protection. 5.1.1 Antenna Installation The U.FL antenna connector from Hirose/Molex of the main GSM/UMTS antenna has been chosen as antenna reference point (ARP) for the Cinterion Wireless Modules reference equip-

ment submitted to type approve PH8/PH8-P. See Section 5.1.2 for details. All RF data specied throughout this manual is related to the ARP. The positions of the module?s antenna connectors can be seen in Figure 9. 1. By delivery default the optional UMTS Rx diversity antenna is congured as available for the module. To avoid negative side eects and performance degradation it is recommended to disable the diversity an-

tenna path if

- the host application does not support a diversity antenna

- the host application includes a diversity antenna - but a 3G network simulator is used for development and performance tests. Please refer to [1] for details on how to congure antenna settings. M852_HD_v02.000 Condential / Released Page 29 of 47 2011-10-21 M852 Hardware Interface Overview 5.1 GSM/UMTS Antenna Interface 34 5.1.2 Antenna Connector M852 uses either an ultra-miniature SMT antenna connector from Hirose Ltd: U.FL-R-

SMT, or the Molex 07341201 U.FL antenna connector. Both connectors have identical me-

chanical dimensions (see Figure 5). Minor dierences in product specications are mentioned in Table 11. The position of the antenna connectors on the PH8/PH8-P board can be seen in Figure 9. Figure 5: Mechanical dimensions of PH8/PH8-P antenna connectors Specication Table 11: Product specications of PH8/PH8-P antenna connectors Item Ratings Nominal impedance Rated frequency Mechanical characteristics Repetitive operation 50 DC to 3GHz Contact resistance:

Center 25m Outside 15m No momentary disconnections of 1. No damage, cracks and looseness of parts. No momentary disconnections of 1. No damage, cracks and looseness of parts. No damage, cracks and looseness of parts. Insulation resistance:

100M min. at high humidity 500M min. when dry No damage, cracks and looseness of parts. Contact resistance:

Center 25m Outside 15m No excessive corrosion Vibration Shock Environmental characteristics Humidity resistance Temperature cycle Salt spray test Conditions Operating temp:-40 to + 90?C Operating humidity: max. 90%

30 cycles of insertion and disen-

gagement Frequency of 10 to 100Hz, single amplitude of 1.5mm, acceleration of 59m/s2, for 5 cycles in the direc-

tion of each of the 3 axes Acceleration of 735m/s2, 11ms duration for 6 cycles in the direc-

tion of each of the 3 axes Exposure to 40?C, humidity of 95% for a total of 96 hours Temperature: +40?C 5 to 35

+90?C 5 to 35?C Time: 30min within 5min 30min within 5min 48 hours continuous exposure to 5% salt water M852_HD_v02.000 Condential / Released Page 30 of 47 2011-10-21 M852 Hardware Interface Overview 5.1 GSM/UMTS Antenna Interface 34 Table 12: Material and nish of PH8/PH8-P antenna connectors and recommended plugs Part Shell Material Phosphor bronze Male center contact Female center contact Insulator Brass Phosphor bronze Receptacle: LCP Finish Hirose: Silver plating Molex: Gold plating Gold plating Gold plating Hirose: Beige, Molex: Ivory Mating plugs and cables can be chosen from the Hirose U.FL Series or from other antenna equipment manufacturers like Molex or IMS. Examples from the Hirose U.FL Series are shown below and listed in Table 13. For latest product information please contact your respective an-

tenna equipment manufacturer. Figure 6: U.FL-R-SMT connector with U.FL-LP-040 plug Figure 7: U.FL-R-SMT connector with U.FL-LP-066 plug M852_HD_v02.000 Condential / Released Page 31 of 47 2011-10-21 M852 Hardware Interface Overview 5.1 GSM/UMTS Antenna Interface 34 In addition to the connectors illustrated above, the U.FL-LP-(V)-040(01) version is oered as an extremely space saving solution. This plug is intended for use with extra ne cable (up to

? 0.81mm) and minimizes the mating height to 2mm. See Figure 8 which shows the Hirose data sheet. Figure 8: Specications of U.FL-LP-(V)-040(01) plug M852_HD_v02.000 Condential / Released Page 32 of 47 2011-10-21 M852 Hardware Interface Overview 5.1 GSM/UMTS Antenna Interface 34 Part number U.FL-R-SMT U.FL-LP-040 Table 13: Ordering information for Hirose U.FL Series Item Connector on PH8/PH8-P Right-angle plug shell for

?0.81mm cable Right-angle plug for

?0.81mm cable Right-angle plug for

? 1.13mm cable Right-angle plug for

? 1.32mm cable Extraction jig U.FL-LP-068 U.FL-LP-066 E.FL-LP-N U.FL-LP(V)-040 (01) HRS number CL331-0471-0-10 CL331-0451-2 CL331-053-8-01 CL331-0452-5 CL331-0452-5 CL331-04441-9 M852_HD_v02.000 Condential / Released Page 33 of 47 2011-10-21 M852 Hardware Interface Overview 5.2 GPS Antenna Interface 34 GPSn Annat Ienterface 5.2 In addition to the RF antenna interface M852 also has a GPS antenna interface. See Section 6.1 to nd out where the GPS antenna connector is located. The GPS antenna instal-

lation and connector are the same as for the RF antenna interface (see Section 5.1.1 and Sec-

tion 5.1.2). It is possible to connect active or passive GPS antennas. In either case they must have 50 Ohm impedance. The simultaneous operation of GSM and GPS has been implemented. Active 3V GPS antennas can be supplied via the GPS antenna interface, if the supply voltage is switched on. This is done by AT command: AT^SGPSC="Power/Antenna" to congure the use of an active GPS antenna and AT^SGPSC="Engine" to start the GPS receiver (for com-

mand details see [1]). The available current is limited to prevent short circuits. M852_HD_v02.000 Condential / Released Page 34 of 47 2011-10-21 M852 Hardware Interface Overview 6 Mechanics 40 6 Mechanics Mechanical Dimensions of M852 6.1 Figure 9 shows the top view of M852 and provides an overview of the board's mechanical dimensions. For further details see Figure 10. Length:

Width:

Height:

50.00mm 33.90mm 3.10mm GSM/UMTS antenna Pin 1 Pin 80 Application interface

(board-to-board connector) Pin 41 Pin 40 Top view UMTS diversity antenna GPS antenna Bottom view Figure 9: M852 top and bottom view M852_HD_v02.000 Condential / Released Page 35 of 47 2011-10-21 M852 Hardware Interface Overview 6.1 Mechanical Dimensions of M852 40 Figure 10: Dimensions of M852 (all dimensions in mm) M852_HD_v02.000 Condential / Released Page 36 of 47 2011-10-21 M852 Hardware Interface Overview 6.2 Mounting M852 to the Application Platform 40 Mounting M852 to the Application Platform 6.2 There are many ways to properly install M852 in the host device. An ecient approach is to mount the M852 PCB to a frame, plate, rack or chassis. Fasteners can be M2 screws plus suitable washers, circuit board spacers, or customized screws, clamps, or brackets. In addition, the board-to-board connection can also be utilized to achieve better support. For proper grounding it is strongly recommended to use large ground plane on the bottom of board in addition to the ve GND pins of the board-to-board connector. The ground plane may also be used to attach cooling elements, e.g. a heat sink or thermally conductive tape. To prevent mechanical damage, be careful not to force, bend or twist the module. Be sure it is positioned at against the host device. Board-to-Board Application Connector 6.3 This section provides the specications of the 80-pin board-to-board connector used to connect M852 to the external application. Connector mounted on the M852 module:

Type:

52991-0808 SlimStack Receptacle 80 pins, 0.50mm pitch, for stacking heights of 3.0 or 4.0mm, see Figure 12 for details. Supplier: Molex, http//www.molex.com M852_HD_v02.000 Condential / Released Page 37 of 47 2011-10-21 Specication (80-pin B2B connector) M852 Hardware Interface Overview 6.3 Board-to-Board Application Connector 40 80 0.5mm (.020") 50V 0.5A max per contact 50m max per contact

> 100M 500V AC (for 1 minute) Table 14: Technical specications of Molex board-to-board connector Parameter Electrical Number of Contacts Contact spacing Voltage Rated current Contact resistance Insulation resistance Dielectric Withstanding Voltage Physical Insulator material (housing) Contact material Insertion force 1st Insertion force 30th Withdrawal force 1st Maximum connection cycles White glass-filled LCP plastic, ammability UL 94V 0 Plating: Gold over nickel

< 74.4N

< 65.6N

> 10.8N 30 (@ 70m max per contact) Mating connector types for the customer's application oered by Molex:

Figure 11: Mating board-to-board connector 53748-0808 on application

?

?

53748-0808 SlimStack Plug, 3mm stacking height, see Figure 13 for details. 53916-0808 SlimStack Plug, 4mm stacking height Note: There is no inverse polarity protection for the board-to-board connector. It is therefore very important that the board-to-board connector is connected correctly to the host application, i.e., pin1 must be connected to pin1, pin2 to pin 2, etc. Pin locations are shown in Figure 9. M852_HD_v02.000 Condential / Released Page 38 of 47 2011-10-21 M852 Hardware Interface Overview 6.3 Board-to-Board Application Connector 40 Figure 12: Molex board-to-board connector 52991-0808 on M852 M852_HD_v02.000 Condential / Released Page 39 of 47 2011-10-21 M852 Hardware Interface Overview 6.3 Board-to-Board Application Connector 40 Figure 13: Mating board-to-board connector 53748-0808 on application M852_HD_v02.000 Condential / Released Page 40 of 47 2011-10-21 M852 Hardware Interface Overview 7 Sample Application 42 7 Sample Application Figure 14 shows a typical example of how to integrate an M852 module with an applica-

tion. The audio interface demonstrates the balanced connection of microphone and earpiece. This solution is particularly well suited for internal transducers. The PWR_IND line is an open collector that needs an external pull-up resistor which connects to the voltage supply VCC of the microcontroller. Low state of the open collector pulls the PWR_IND signal low and indicates that the PH8/PH8-P module is active, high level noties the Power-down mode. If the module is in Power-down mode avoid current owing from any other source into the mod-

ule circuit, for example reverse current from high state external control lines. Therefore, the controlling application must be designed to prevent reverse ow. If an external level controller is required, this can be done by using for example a 5V I/O tolerant buer/driver like a

"74AVC4T245" with OE (Output Enable) controlled by PWR_IND. The EMC measures are best practice recommendations. In fact, an adequate EMC strategy for an individual application is very much determined by the overall layout and, especially, the po-

sition of components. Disclaimer:

No warranty, either stated or implied, is provided on the sample schematic diagram shown in Figure 14 and the information detailed in this section. As functionality and compliance with na-

tional regulations depend to a great amount on the used electronic components and the indi-

vidual application layout manufacturers are required to ensure adequate design and operating safeguards for their products using M852 modules. M852_HD_v02.000 Condential / Released Page 41 of 47 2011-10-21 M852 Hardware Interface Overview 7 Sample Application 42 Figure 14: M852 sample application M852_HD_v02.000 Condential / Released Page 42 of 47 2011-10-21 M852 Hardware Interface Overview 8 Reference Approval 44 8 Reference Approval Reference Equipment for Type Approval 8.1 The Cinterion Wireless Modules reference setup submitted to type approve M852 is shown in the following gure1. The module is connected to the DSB75 via a special adapter and either mounted directly onto the adapter or connected using a ex cable:

Figure 15: Reference equipment for type approval 1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-

sen to connect the module directly to the GSM/UMTS/GPS test equipment instead of employing the SMA antenna connectors on the M852 -DSB75 adapter as shown in Figure 15. The following products are recommended:

Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)

(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/

Aeroex Weinschel Fixed Coaxial Attenuator Model 3T/4T

(for details see http://www.aeroex.com/ams/weinschel/pdles/wmod3&4T.pdf) M852_HD_v02.000 Condential / Released Page 43 of 47 2011-10-21 M852 Hardware Interface Overview 8.2 Compliance with FCC and IC Rules and Regulations 44 Compliance with FCC and IC Rules and Regulations 8.2 The Equipment Authorization Certication for the Cinterion Wireless Modules reference appli-

cation described in Section 8.1 will be registered under the following identiers:

M852:

FCC Identier ZK7MSERIES Granted to BAP Manufacturers of mobile or xed devices incorporating M852 modules are authorized to use the FCC Grants and Industry Canada Certicates of the M852 modules for their own nal products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating resp. "Contains FCC ID ZK7MSERIES", and accordingly resp. The integration is limited to xed or mo bile categorised host devices, where a separation distance between the antenna and any person of min. 20cm can be assured during normal operating conditions. For mobile and xed operation congurations the antenna gain, including cable loss, must not exceed the limits that are stated on the FCC Grant. IMPORTANT:

Manufacturers of portable applications incorporating M852 modules are required to have their nal product certied and apply for their own FCC Grant and Industry Canada Certicate related to the specic portable mobile. This is mandatory to meet the SAR requirements for por-

table mobiles. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. M852_HD_v02.000 Condential / Released Page 44 of 47 2011-10-21 M852 Hardware Interface Overview 8.2 Compliance with FCC and IC Rules and Regulations 44 CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. M852_HD_v02.000 Condential / Released Page 45 of 47 2011-10-21 M852 Hardware Interface Overview 9 Appendix 46 9 Appendix List of Parts and Accessories 9.1 Table 15: List of parts and accessories Description PH8 Supplier Cinterion M852 BAP DSB75 Support Box DSB75 adapter for mounting the M852 evaluation module Votronic Handset Cinterion BAP VOTRONIC Ordering information Standard module Cinterion Wireless Modules IMEI:

Ordering number: L30960-N1900-A200 Customer IMEI:

Ordering number: L30960-N1905-A200 Standard module Cinterion Wireless Modules IMEI:

Ordering number: L30960-N1910-A200 Customer IMEI:

Ordering number: L30960-N1915-A200 Ordering number: L36880-N8811-A100 Ordering number: L30960-N1802-A100 Votronic HH-SI-30.3/V1.1/0 VOTRONIC Entwicklungs- und Produktionsgesellschaft f?r elek-

tronische Gere mbH Saarbrker Str. 8 66386 St. Ingbert Germany Phone: +49-(0)6 89 4 / 92 55-0 Fax: +49-(0)6 89 4 / 92 55-88 Email: contact@votronic.com Ordering numbers: 91228 91236 Molex SIM card holder incl. push button ejector and slide-in tray Board-to-board connector U.FL antenna connector Sales contacts are listed in Table 16. Sales contacts are listed in Table 16. Molex Hirose or Molex Sales contacts are listed in Table 16 and Table 17. M852_HD_v02.000 Condential / Released Page 46 of 47 2011-10-21 M852 Hardware Interface Overview 9.1 List of Parts and Accessories 46 Table 16: Molex sales contacts (subject to change) Molex For further information please click:

http://www.molex.com Molex China Distributors Beijing, Room 1319, Tower B, COFCO Plaza No. 8, Jian Guo Men Nei Street, 100005 Beijing P.R. China Phone: +86-10-6526-9628 Phone: +86-10-6526-9728 Phone: +86-10-6526-9731 Fax: +86-10-6526-9730 Molex Deutschland GmbH Felix-Wankel-Str. 11 4078 Heilbronn-Biberach Germany Phone: +49-7066-9555 0 Fax: +49-7066-9555 29 Email: mxgermany@molex.com Molex Singapore Pte. Ltd. Jurong, Singapore Phone: +65-268-6868 Fax: +65-265-6044 American Headquarters Lisle, Illinois 60532 U.S.A. Phone: +1-800-78MOLEX Fax: +1-630-969-1352 Molex Japan Co. Ltd. Yamato, Kanagawa, Japan Phone: +81-462-65-2324 Fax: +81-462-65-2366 Table 17: Hirose sales contacts (subject to change) Hirose Ltd. For further information please click:

http://www.hirose.com Hirose Electric (U.S.A.) Inc 2688 Westhills Court Simi Valley, CA 93065 U.S.A. Hirose Electric UK, Ltd Crownhill Business Centre 22 Vincent Avenue, Crownhill Milton Keynes, MK8 OAB Great Britain Phone: +44-1908-305400 Fax: +44-1908-305401 Phone: +1-805-522-7958 Fax: +1-805-522-3217 Hirose Electric Co., Ltd. 5-23, Osaki 5 Chome, Shinagawa-Ku Tokyo 141 Japan Phone: +81-03-3491-9741 Fax: +81-03-3493-2933 Hirose Electric GmbH Herzog-Carl-Strasse 4 73760 Ostldern Germany Phone: +49-711-456002-1 Fax: +49-711-456002-299 Email: info@hirose.de Hirose Electric Co., Ltd. European Branche First class Building 4F Beechavenue 46 1119PV Schiphol-Rijk Netherlands Phone: +31-20-6557-460 Fax: +31-20-6557-469 M852_HD_v02.000 Condential / Released Page 47 of 47 2011-10-21

BAP S-Series GPS Controller(GPS Receiver) Operators Manual Getting Started 1-1 Table of Contents Chapter 1 Chapter 2 Getting Started .............................................................................. 1-6 Identifying Hardware Components .................................................... 1-6 Front ............................................................................................ 1-6 Keypad ......................................................................................... 1-93 Back/Sides ..................................................................................... 1-4 Bottom......................................................................................... 1-10 Getting Your Device Ready for Use .................................................. 1-11 Installing the Battery and SIM Card ............................................. 1-11 Connecting to AC Power and Charging the Battery..................... 1-13 Performing the Initial Startup...................................................... 1-13 Synchronizing with Your Computer ................................................. 1-14 Installing ActiveSync or WMDC ................................................... 1-14 Using Options ................................................................................... 1-15 Using micro SD Card .................................................................... 1-15 Basic Skills ..................................................................................... 2-1 Power Saving and Turning Off ............................................................ 2-1 Backlight Off .................................................................................. 2-1 Suspend Mode ............................................................................... 2-1 Turning Off .................................................................................... 2-1 Navigating on the Screen ................................................................... 2-2 Stylus ............................................................................................. 2-2 Navigation Button ......................................................................... 2-2 Home Screen ...................................................................................... 2-3 Landscape View ............................................................................. 2-3 Navigation Bar and Toolbar ............................................................... 2-4 Programs ............................................................................................ 2-4 Getting Started 1-2 Chapter 3 Chapter 4 Notifications ....................................................................................... 2-4 Entering Information .......................................................................... 2-5 Entering Text Using the Input Panel .............................................. 2-5 Recognizer ..................................................................................... 2-6 Writing on the Screen.................................................................... 2-6 Drawing on the Screen .................................................................. 2-7 Recording a Message ..................................................................... 2-8 Securing Your Device .......................................................................... 2-9 Locking Your Device ................................................................... 2-109 Securing Your Device with a Password ........................................ 2-10 Managing Your Device ................................................................... 3-1 Managing Power ................................................................................ 3-1 Low Battery Signals and Actions .................................................... 3-1 Power-Saving Tips.......................................................................... 3-1 Customizing Your Device .................................................................... 3-2 Searching and Organizing Information .............................................. 3-6 Microsoft Pocket Outlook .............................................................. 4-1 Calendar: Scheduling Appointments and Meetings ........................... 4-1 Creating an Appointment .............................................................. 4-2 Using the Calendar Summary Screen ............................................ 4-4 Contacts: Tracking Friends and Colleagues ........................................ 4-4 Creating a Contact ......................................................................... 4-5 Using the Contacts Summary Screen ............................................. 4-5 Tasks: Keeping a To Do List ................................................................ 4-5 Creating a Task .............................................................................. 4-5 Using the Tasks Summary Screen .................................................. 4-7 Notes: Capturing Thoughts and Ideas ................................................ 4-7 Creating a Note ............................................................................. 4-8 Email: Sending and Receiving Email Messages .................................. 4-8 Synchronizing E-mail Messages ..................................................... 4-8 Connecting Directly to an E-mail Server ........................................ 4-8 Using the Message List .................................................................. 4-9 Getting Started 1-3 Chapter 5 Chapter 6 Composing and Sending an E-mail ................................................ 4-9 Managing Email Messages and Folders ..................................... 4-910 More Programs .............................................................................. 5-1 ActiveSync/WMDC ............................................................................. 5-1 Synchronizing Data ........................................................................ 5-2 Office Mobile ...................................................................................... 5-2 Creating an office file .................................................................... 5-3 Opening an office file .................................................................... 5-3 Internet Explorer ................................................................................ 5-4 Browsing the Internet ........................................................................ 5-4 Windows Live Messenger ................................................................... 5-5 Setting up Windows Live ............................................................... 5-6 Signing in to Messenger ................................................................ 5-6 Windows Media Player ...................................................................... 5-6 Pictures & Videos ............................................................................... 5-8 Viewing Pictures and Videos ......................................................... 5-8 Camera ............................................................................................ 5-10 Taking Pictures ............................................................................ 5-10 Recording Video Clips .................................................................. 5-11 Geotagging ................................................................................ 5-152 Remote Desktop Mobile .................................................................. 5-15 Getting Connected ......................................................................... 6-1 Types of Connections ......................................................................... 6-1 Using Cellular Connection (Select Model Only).................................. 6-1 Setting up a Cellular (HSDPA) Connection ..................................... 6-1 Setting up a Dial-up Connection .................................................... 6-2 Using Wireless Network ..................................................................... 6-3 Switching On or Off the Wi-Fi Radio .............................................. 6-3 Connecting to a Wireless Network ................................................ 6-3 Using the Bluetooth Function ............................................................ 6-5 Switching On or Off the Bluetooth Radio ...................................... 6-5 Sending Files via the Bluetooth ..................................................... 6-6 Getting Started 1-4 Receiving Files via the Bluetooth ................................................. 6-67 Creating a Bluetooth Partnership ................................................ 6-77 Chapter 7 Troubleshooting and Maintenance ............................................... 7-1 Resetting Your Device ........................................................................ 7-1 Restoring Factory Default State ......................................................... 7-2 Troubleshooting ................................................................................. 7-3 Caring for Your Device ........................................................................ 7-4 Safety Precautions ............................................................................. 7-5 About Charging .............................................................................. 7-5 About the Charger ......................................................................... 7-6 About the Battery .......................................................................... 7-6 Notices ........................................................................................... 7-6 Chapter 8 GeoAssist Software ....................................................................... 8-1 Starting GeoAssist ............................................................................. 8-1 GeoAssist Settings .............................................................................. 8-1 GPS Tab .......................................................................................... 8-1 Satellite Detail Tab ......................................................................... 8-3 Use Mode Tab ................................................................................ 8-4 Log Tab ........................................................................................... 8-6 About Tab ....................................................................................... 8-9 Chapter 9 Recommended Settings ................................................................ 9-1 GPS Settings and Best Practices ......................................................... 9-1 Handheld Settings and Best Practices ................................................ 9-1 Chapter 10 Warranty Information ................................................................ 10-1 Warranty Terms ................................................................................ 10-1 Getting Started 1-5 Chapter 1 Getting Started This chapter covers the hardware components of the device. Identifying Hardware Components Front Getting Started 1-6 Ref Component LED Indicator Touch Screen Power Button Description Blinking Green displays charging battery Solid Green displays full battery Blinking Red displays low battery Solid Red displays faulty battery Alternating Green and Amber displays charging battery with Windows notifications Alternating Red and Amber displays low battery with Windows notifications Alternating Amber and Green displays full battery with Windows notifications Alternating Amber and Red displays faulty battery with Windows notifications Video display that responds to finger taps and gestures Turns on or off your device. Microphone Voice recorder Reset Keypad Resets the device See Keypad section for details Getting Started 1-7 Keypad Ref Component Description Left/Right Soft Key Home Message Start Menu Power Button Navigation Button Selects screen commands. Returns to Home screen Composes and Sends messages Opens Start Menu Turns device on and off Navigates options in 4 directions. Center button selects option. Getting Started 1-8 Back /Sides Description Takes pictures and records video Plays music, sounds and voices. Covers and protects battery Detaches battery cover Ref Component Camera Speaker Battery Cover Release button Getting Started 1-9 Stylus Used to input information and select options on the touch screen Used to attach hand string Press to take a photo Allows for use of optional external antenna. Antenna may be placed on top of a vehicle/building to gain greater reception. Lanyard hole Camera button External GPS Antenna Bottom Ref Component Description Headphone Connector USB OTG (Host &

Client) Connector Power Connector Allows for stereo headphones connection Allows for USB connection Allows for battery charging through an AC adapter Getting Started 1-10 Getting Your Device Ready for Use Installing the Battery and SIM Card (Select model only) 1. Detach the battery cover from the device. Getting Started 1-11 2. If your model has the 3.5G connection function, you need to install the SIM card provided by your mobile operator and insert the card all the way into the slot then push to lock. NOTE:

To remove the SIM card, push to open then pull the card out of the slot. 3. To install the battery, attach the connector side of the battery to the unit then push to engage the connector. Getting Started 1-12 4. Attach the battery cover to the device. Connecting to AC Power and Charging the Battery Note:

Charge the battery to full before using the device for the first time. 1. Connect the converter to the AC charger. 2. Connect the DC end of the AC adapter to your device and the other end to an outlet. 3. The LED indicator will blink green when the battery is charging. Do not disconnect your device from AC power until the battery is fully charged. This may take a couple of hours. Note:

For optimal lithium battery performance, adhere to the following:

Only use the included AC adapter. The lithium battery does NOT need to be fully discharged before next charging. Do NOT charge the battery in high temperatures (i.e. direct sunlight) The battery MUST be fully charged at least once every two weeks even if the device is not in use. Over-discharge of the battery creates negative battery performance. The battery may also be charged if the device is connected via USB to a computer. Performing the Initial Startup When the device is turned on for the first time, an initial startup process will begin. 1. Connect the device to AC power or make sure the battery has a full charge. 2. Turn on the device by pressing the Power button. 3. Select the language you prefer to use. 4. Follow the Setup Wizards on screen instructions. Getting Started 1-13 5. Use the following steps for devices with 3.5G connection function: (Select model only) If a SIM card has been inserted and the 3.5G network operator (or you) has set the PIN, you will be prompted to enter the PIN. 6. Once Setup is complete, the Home screen will appear. The device is ready for use. Synchronizing with Your Computer Your device can connect and synchronize data with a Windows-based computer through ActiveSync and Windows Mobile Device Center (WMDC). ActiveSync is compatible with Windows XP. WMDC is only compatible with Windows Vista or Windows 7. ActiveSync and WMDC act as gateways between your device and your computer. They allow for transferring Outlook e-mail, appointments, contacts, and tasks, and media such as pictures, music, and videos. Also, the Explore feature in either program can move files or programs from your computer to your device. Installing ActiveSync or WMDC For Windows XP, download and install ActiveSync. For Windows Vista or Windows 7, download and install Windows Mobile Device Center.

(Visit the Microsoft website to download the program and to obtain operating instructions. http://www.microsoft.com) NOTE:

Before installation, make sure Microsoft Outlook is installed on your computer. Install ActiveSync or Windows Mobile Device Center BEFORE connecting your device. Getting Started 1-14 ActiveSync connection problems may occur in some cases. Likely causes include interoperability with firewall applications or network management applications. For troubleshooting information, visit the Microsoft web site. http://www.microsoft.com After software installation is complete, connect your device to your computer via the USB cable. The device is ready to be synchronized. Using Options Using micro SD Card The device supports micro Secure Digital (micro SD). Use the following steps to insert a micro SD card:

1. Detach the battery cover from the device. 2. Remove the battery. 3. Insert the card into the slot. Getting Started 1-15 4. Install the battery before attach the battery cover to the device. NOTE:

Keep slot free of debris. Store micro SD card in a protected box to avoid heat, dust, and humidity. Getting Started 1-16 Chapter 2 Basic Skills This chapter covers the basic operations of the device. Power Saving and Turning Off Backlight Off The touch screens backlight dims after inactivity. By default, the touch screen will dim after 30 seconds of inactivity on battery power. The touch screen will dim after 1 minute of inactivity while connected on AC power. To restore the backlight, tap the touch screen or press any button. Suspend Mode The device sets itself into suspend mode after inactivity. By default, the device will set itself into suspend mode after 3 minutes of inactivity on battery power. The device will set itself into suspend mode after 5 minutes while connected on AC power. To manually set the device into suspend mode, briefly press the power button. To resume operation, press the power button. Turning Off To turn off the device, hold down the power button. The device will play a 3 second countdown notification and turn off. Basic Skills 2-1 Navigating on the Screen Stylus Use the stylus to navigate the touch screen. The stylus is stored in the side slot. Remove it for use. Tap To open items and select options, touch the screen once with the stylus. Drag To drag text and images across the screen, tap, hold, and drag text or image. Lists and multiple items can also be selected and dragged. Tap and hold Tap and hold the stylus on an item to view a shortcut menu of available options. From the shortcut menu, select preferred option. Navigation Button The navigation button can also be used to navigate the screen. Basic Skills 2-2 Home Screen When the device is turned on, the default screen is the Home screen. The Home screen can be accessed by tapping and then Home. The Home screen displays upcoming appointments, active tasks, e-mail messages and notifications, and more. If a section of the Home screen is tapped, the associated program will open. Landscape View To view the device in landscape view, tap General Landscape or Portrait. Settings System Screen Basic Skills 2-3 Navigation Bar and Toolbar The navigation bar is located at the top of the screen. It displays active programs and tools such as, volume, battery, time, connectivity, and more. Tap the navigation bar to set up related items. The navigation bar:

The toolbar is located at the bottom of the screen. The toolbar includes options such as an input panel and the Menu button. An example of the toolbar:

Programs To switch from one program to another without closing other programs, tap to open the Start menu. All available programs can be accessed through the Start menu. Notifications The device has a variety of reminder notifications, such as Calendar appointments, Tasks, alarm clock, etc. Notifications types include the following:

A screen message A sound, which can be changed or specified. Basic Skills 2-4 The notification indicator flashes in amber. To specify and choose reminder types and sounds, tap Settings Sounds

& Notifications. Entering Information There are several options for inputting new information. Options include the following:

Enter text in the Input panel. Text can be entered by using the on-screen keyboard or other input methods. Write directly on the screen. Draw pictures, diagrams, charts, etc. on the screen. Record a message using the microphone. Entering Text Using the Input Panel Information can be entered by using the Input panel. Text can be entered by using the on-screen keyboard or by using the handwriting recognizer. To show or hide the Input panel, tap the

. The soft keyboard appears by default. To change input modes, tap and hold and select preferred mode from the popup menu. When using the Input panel, the device auto-detects words that are being typed. Tap on the displayed word to insert it. The device will learn to anticipate more words through usage. Basic Skills 2-5 Input Panel Recognizer Texts can be entered using the stylus with the recognizer. When a letter is written into the recognizer, it is converted into typed text onto the screen. Specific instructions on using the recognizer can be accessed by tapping the question mark located next to the writing area. Writing on the Screen In programs that accept writing, such as Notes, a stylus can be used to write onto the screen. Writing can be edited and formatted into text later. To write on the screen, tap Draw to switch to drawing mode. Basic Skills 2-6 New note Drawing on the Screen Pictures, diagrams, charts, etc. can be drawn onto the screen in the same manner as writing. 1. Tap Draw to enter drawing mode. 2. To draw, cross 3 ruled lines on the first stroke. A drawing box appears. 3. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing. Basic Skills 2-7 Drawing Box Recording a Message The device can record messages for reminders, phone numbers, thoughts, etc. In the Notes program, a stand-alone recording can be created with the note. To create a recording:

1. Tap Notes to open the program. 2. Tap View Recording Toolbar to view the Recording toolbar. 3. Place the devices microphone near your mouth or the source of the sound. 4. Tap the Record button on the Recording toolbar to begin recording. 5. To stop recording, tap the Stop button on the Recording toolbar. The new recording will appear in the note list or as an embedded icon. To play a recording, select the recording in the list or tap its icon in the note. Basic Skills 2-8 Recording file Volume Control Securing Your Device Locking Your Device The device can be locked when not in usage. Locking the device prevents accidental operation of the touchpad or keypad. To lock the device: tap Device unlocked on the Home screen. To unlock the device: tap Unlock Unlock. Basic Skills 2-9 Unlock Device Securing Your Device with a Password To keep data secure, a password can be assigned to be inputted each time the device is turned on. 1. Tap Settings Lock. 2. Tap to select Prompt if phone unused for. In the box to the right, select a desired period of time. 3. Select the password type. 4. Enter desired password. Confirm the password. 5. Tap ok to save the settings. The next time the device is turned on, a password will be needed to login. The Basic Skills 2-10 password also needs to be entered on the computer for an ActiveSync connection. NOTE:

If the password is forgotten, the memory must be cleared before accessing the devi Basic Skills 2-11 Chapter 3 Managing Your Device This chapter describes how to manage power, settings, data and programs. Managing Power A fully charged battery should supply power for approximately 8 hours. Operation time will vary depending on usage of the device. Continuous multimedia operation or micro-SD card operation will decrease the batterys power supply. Low Battery Signals and Actions NOTE:

The battery should be charged for at least 30 minutes if the device displays a warning of low power. Failure to do so may result in insufficient battery power for operation. Battery power can be monitored by tapping available remaining power is displayed on a status bar in the Power control panel. Settings System Power. The When the battery is low, a warning message will pop up. As a precaution, all data should be saved and the battery should be recharged immediately via AC power or USB power. Failure to do so may result in data loss. Power-Saving Tips The following describes how to maximize the battery power and operation time. Managing Your Device 3-1 Set the device in suspended mode when not in use. By default, the screen backlight will automatically dim and the device will go into suspended mode when it has been idle for a period of time. The idle time required before the device goes into suspended mode can be adjusted by tapping Settings System Power Advanced. The device can also be set into suspended mode by pressing the power button. Disable unneeded functions and features. Decrease the volume. Disable unused or unnecessary sounds and lights. Keep only the most necessary notifications. These settings can be adjusted by tapping Settings Sounds & Notifications. Avoid power-consuming operations such as:

Using a modem or other peripheral Multimedia playback and recording Using or monitoring wireless network signals Customizing Your Device NOTE:

Incorrect settings may cause malfunction. Care should be taken when adjusting settings. You can customize the settings of the device to your own preferences. Tap Settings. The items you can customize are described as follows:

Items Description Bluetooth To set up or change the Bluetooth connection. Managing Your Device 3-2 Clock & Alarms To change the time, date, and alarms. Home Lock To select the information, theme, and background to be displayed on the Home screen. To set a security password. Sounds &

Notifications To change the settings for the systems sounds, volume, and notifications. Connections Connections To set up or change connection information. Domain Enroll To connect the device with company resources. An enrollment password should be provided by the companys system administrator. Beam mode To enable to receive incoming files. USB to PC To adjust settings for the type of USB connection and to enable advanced network functionality. Wi-Fi To configure the wireless network module. Wireless Manager To change the Wi-Fi and Bluetooth radio status. Personal Buttons To assign hardware buttons to specific programs and to adjust sensitivity levels of the buttons, i.e. repetition rate of scroll. Owner Information To enter personal information. Managing Your Device 3-3 System About To show the hardware information and to define the device name for identifying itself to other computers. Backlight To adjust the brightness level and power saving options. Certificates To establish personal identification or the identification of other computers. Establishing a personal identification of the device and other computers prevents unauthorized users from accessing the device and information on the device. Customer Feedback To send personal feedback to Microsoft regarding the Windows Mobile software. Encryption To encrypt files on the storage card. Error Reporting To enable or disable error reporting to Windows Mobile technical support group. External GPS To configure the GPS hardware settings. Managed Programs To show the installation history of managed programs. Memory To view the system memory or the memory of any installed storage card and to manually stop a program if it becomes unstable. Managing Your Device 3-4 Power To show the remaining battery power and to set battery power settings. Regional Settings To specify the region and the local number, currency, time, and date. Remove Programs To remove programs. Screen To set the orientation of the screen to portrait or landscape. To adjust the touch screen for accurate screen taps. To adjust the text size. System Information To view system information. Task Manager To view or perform task management of programs. Managing Your Device 3-5 Searching and Organizing Information The Search feature on the device helps quickly locate information. To search for a file, tap and tap Search to start the search. Search Phone. Enter the file name, select a data type, File Explorer can also be used to find files on the device and to organize these files into folders. Tap File Explorer. NOTE:

Files can be moved in File Explorer by tapping and holding the item. Tap Cut or Copy on the shortcut menu, browse to the new location, and then tap Paste. Managing Your Device 3-6 Chapter 4 Microsoft Pocket Outlook Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Notes, and Messaging. These programs can be used individually or together. NOTE:

For detailed information on using Microsoft programs, tap Help. Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. Appointments can be viewed as Agenda, Day, Week, Month, or Year. Notifications can be set as reminders for appointments. Appointments can also be displayed on the Home screen. Tap Calendar to access the program. Microsoft Pocket Outlook 4-1 Tap to access Creating an Appointment 1. In Day or Week view, tap the desired date and time for the appointment. 2. Tap New Appointment. 3. Using the Input panel, tap first to select the field, and then enter a description and a location. 4. If needed, tap the date and time to change them. 5. Enter other desired information. You will need to hide the Input panel to see all available fields. 6. Tap ok to save and return to Calendar. Microsoft Pocket Outlook 4-2 Tap to add new appointment Microsoft Pocket Outlook 4-3 Using the Calendar Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. Contacts: Tracking Friends and Colleagues Contacts maintains a list of friends and colleagues. Tap Contacts for access. For model with the 3.5G connection function, contacts stored in the SIM card also appear in the list. They are indicated by the icon

. Microsoft Pocket Outlook 4-4 Creating a Contact 1. In Contacts, tap

. 2. For model with the 3.5G connection function: Outlook or SIM contact will be ask to be selected. 3. Using the Input panel, enter a contacts information. Scroll to view all available fields. 4. Tap ok to save and return to the contact list. Using the Contacts Summary Screen When a contact in the contact list is tapped, a summary screen is displayed. To change the contact information, tap

. Tasks: Keeping a To Do List Use Tasks to create a To-Do list. Tap Tasks to access the program. Creating a Task 1. In Tasks, tap New Task. 2. Using the Input panel, enter a description. 3. Enter a start date and due date, or enter other information by first tapping the field. Hide the Input Panel to view all available fields. 4. Tap ok to save and return to the task list. Microsoft Pocket Outlook 4-5 Microsoft Pocket Outlook 4-6 Using the Tasks Summary Screen A summary of a task appears when it is tapped. To change the task, tap

. Notes: Capturing Thoughts and Ideas Reminders, thoughts, idea, drawings, etc can be quickly jotted with Notes. A note can be a written note, an audio recording, or a written note with an audio recording. Tap Notes to open the program. Microsoft Pocket Outlook 4-7 Creating a Note 1. In Notes, tap

. 2. Create a note by writing, drawing, typing, or recording. 3. Tap ok to save and return to the note list. Email: Sending and Receiving Email Messages The Email program can be used to send and receive email messages in two ways:

Sync the device with Microsoft Exchange or Outlook on a computer. Connect directly to an email server through an Internet Service Provider (ISP) or a network. Tap Email to access the program. Synchronizing E-mail Messages E-mail messages can be synchronized as part of the general synchronization process. Enable Inbox synchronization in ActiveSync/Windows Mobile Device Center. For information on enabling Inbox synchronization, see ActiveSync/Windows Mobile Device Center Help on the desktop computer. Connecting Directly to an E-mail Server Email messages can be sent and received by connecting to a POP3 or IMAP4 email server through an ISP or local area network. Multiple email services can be used to receive messages. To use multiple email services, each email service needs to be set up and named. Microsoft Pocket Outlook 4-8 Using the Message List Received messages are displayed in the message list. Tap a message to open it. By default, when the device is synchronized with a desktop computer or a server, only messages from the previous three days and only the first 2kb will be synced with the device. Attachments will not be synced with the device. The original messages will remain on the desktop computer. Messages can be marked so that the device will retrieve the messages in full during the next synchronization or email server connection. To do so, tap and hold the desired message to retrieve from the message list. On the shortcut menu, tap Download Message. An icon will appear in the Inbox message list to display the message status. Composing and Sending an E-mail 1. Select the account in E-mail.. 2. In the message list, tap New. 3. In the To field, enter an email address of one or more recipients, separating them with a semicolon. If the address is already in the contact list, tap To to select the e-mail address. 4. Enter a message. 5. To check spelling, tap Spell Check. 6. To attach a file to the message, tap Insert and select the desired file. 7. Tap Send when complete. If working offline, the message is moved to the Outbox folder and is sent the next time the device is connected to a server or to a desktop computer. . Messages in the Outbox folder will be delivered in one of two ways:

Microsoft Pocket Outlook 4-9 The message is transferred to the Outbox folder in Exchange or Outlook upon next synchronization. The message is transferred to the email server upon connection. Managing Email Messages and Folders Each e-mail service account has its own folder hierarchy with five default folders: Inbox, Outbox, Deleted Items, Drafts and Sent Items. The messages received and sent through the mail service are stored in these folders. Additional folders can be created within each hierarchy. To create folders, tap The Deleted Items folder contains messages that have been deleted on the device. The behavior of the Deleted and Sent Items folders depends on the chosen options. Tools Manage Folders. Microsoft Pocket Outlook 4-10 Chapter 5 More Programs This chapter overviews other programs built into the device and how to use these programs. NOTE:

For detailed information on using Microsoft programs, tap Help. ActiveSync / WMDC ActiveSync on the device works with ActiveSync on a Windows XP computer and with Windows Mobile Device Center (WMDC) on a Windows Vista/Windows 7 computer. When a connection is established between the device and a computer, information can be synchronized on the device and the computer with ActiveSync or WMDC. Synchronization compares the data on both the device and the computer and updates both systems with the most recent information. For example:

Outlook Contacts, Calendar and Tasks databases on the device can be kept up-to-date by synchronizing the device with Microsoft Outlook data on the computer. Synchronize email messages in the device Outlook Inbox with email messages in Microsoft Outlook on the computer. Synchronize Microsoft Word, Excel and PowerPoint files between the device and the computer. Files are automatically converted to the correct format. There are options to control which information types are synchronized and how much data is synchronized. More Programs 5-1 ActiveSync can also:

Copy (not synchronize) files between the device and computer. Add and remove programs on the device. Pass through the computer to a network or the Internet. Synchronizing Data Once synchronization set is complete, date can be synchronized between the device and the computer. 1. Connect the device to the computer. 2. On the device, tap ActiveSync. 3. Tap Sync to begin synchronization. Office Mobile Microsoft Office Mobile works with Microsoft Office on the computer to give easy access to copies of office documentation. Tap Office Mobile2010 and select a program. Excel Mobile2010 OneNote Mobile2010 PowerPoint Mobile2010 SharePoint WorkSpace Mobile 2010 Word Mobile2010 More Programs 5-2 Creating an Office file NOTE:

PowerPoint presentations on the device cannot be created or edited. 1. Tap Office Mobile and select the program. 2. Enter the information. 3. After entering the information, tap OK. The file is automatically saved and named according to the first characters of text entered in the file. Opening an Office file Upon opening an Office Mobile program, a file list will appear. Tap a file to open it. Only one file may be opened at a time. If a second file is opened, the first file will be saved and closed automatically. More Programs 5-3 Internet Explorer Internet Explorer can be used to view Web pages in the following ways:

Connect to an ISP or network and browse the Web. To do this, a connection must first be created. During synchronization with a computer, download links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the computer. While connected to an ISP or network, the device can download files and programs from the Internet or an intranet. Tap Internet Explorer. The Internet Explorer Mobile home page appears. Browsing the Internet 1. Tap Internet Explorer. 2. Tap the Favorites soft key to display the Favorites list. 3. Tap the desired page to view. More Programs 5-4 Favorites Zoom in/out Note:

To visit web pages not included in Favorites, enter a web address in the address bar at the top of the screen and tap entered address. or, tap the arrow to choose from a previously Windows Live Messenger Windows Live Messenger provides practically instant access to up-to-date MSN Hotmail Inbox, Messenger Contacts list, and options for customizing the Messenger experience. Features of Windows Live Messenger include:

MSN Hotmail Read, write and send e-mail. Delete e-mail and manage Hotmail folders. MSN Messenger More Programs 5-5 Send and receive instant messages. Check which contacts are online. Subscribe to status updates for selected contacts. Synchronize the Windows Live contacts, Hotmail inbox and MSN Messenger to the device. Windows Live requires an internet connection. Windows live requires either an MSN Hotmail account, an MSN Messenger account, or a Windows Passport account. Setting up Windows Live 1. Tap Windows Live to access the program. 2. Tap Sign in to Windows Live. 3. Tap Accept. 4. Follow the on-screen instructions to complete the setup. Signing in to Messenger Before signing into Messenger, Windows Live must be signed into first. 1. Tap Messenger to access the program. 2. Tap Sign in. Windows Media Player Windows Media Player can be used to play digital audio or video stored on the device, on a network, or on a web site. Tap Windows Media. More Programs 5-6 Supported formats are Windows Media or MP3 format (including files with the extensions .asf, .wma, .wmv and .mp3). Microsoft Windows Media Player on a desktop computer can be used to copy digital audio and video files to the device. More Programs 5-7 Pictures & Videos Features of Pictures & Videos include:

Viewing pictures and video clips. Sending pictures and videos to others. Setting a picture as the background on the Home screen. Playing a slide show. Editing pictures. Viewing Pictures and Videos 1. To view pictures or video stored on a storage card. 2. Tap Pictures & Videos. By default, the program displays thumbnails of the pictures and videos in the My Pictures folder, within the My Documents folder on the device. 3. Thumbnails of pictures and videos appear on the screen. Tap one of them to view in full screen. More Programs 5-8 More Programs 5-9 Camera The Camera program can take photos and record video clips. Taking Pictures 1. To start the program, press the camera button on the device or tap Pictures

& Videos Camera. The Camera screen will appear. 2. Aim the camera lens at the subject. Press the camera button halfway for automatic focusing. A white frame will appear. Wait until the color of the frame to turn green indicating that the subject is in focus. 3. Press the camera button fully to take the picture. 4. The taken picture will be displayed on the screen. Tap the screen or press camera button to go back to the camera screen. 5. If the picture is not chosen to be deleted after it was taken, the picture is saved to the pre-selected storage location. More Programs 5-10 Recording Video Clips 1. To start the program, press the camera button or tap Programs Pictures &

Videos Camera. 2. Tap the modes.

/

at left corner of the screen to switch between camera and video 3. For recording options and controls, tap

. 4. Press the camera button to start recording. 5. To stop recording, press the camera button. 6. The video clip is saved to the pre-selected storage location. To view the video clip, tap Thumbnails. More Programs 5-11 Geotagging 1. This picture here shows you the user interface of the Geo Camera. Tap the Set up item on the bottom of the screen. More Programs 5-12 2. To Enable the coordinate and date marks by tapping the upper right icons. The upper left icon (flag) shows the GPS position fix or not. More Programs 5-13 3. To check the coordinates from BAP S series unit, the coordinate and date marks will show on the upper left corner of the photo. More Programs 5-14 4. To check the coordinates from PC/NB, copy the file from BAP S series to PC/NB and right click on the file. Select Content to check more information. Remote Desktop Mobile Remote Desktop allows the device to log onto a Windows Terminal Server and use the programs installed on the server. NOTE:

Access to a remote computer requires that the computer have Terminal Services or Remote Desktop installed. To connect to a remote computer:

1. Tap Remote Desktop Mobile. 2. Select the computer. Enter the user name, password, and domain. 3. Tap Connect. More Programs 5-15 Chapter 6 Getting Connected This chapter describes the different types of connections the device can achieve. Types of Connections The device can connect to the Internet, a computer, and to other devices and services. Using Cellular Connection (Select Model Only) Model with 3.5G connection function allow the device to access the Internet via the mobile phone service network. Setting up a Cellular (HSDPA) Connection NOTE:

HSDPA service requires a subscription with a mobile phone service network operator. In most cases, the cellular (HSDPA) connection will be preconfigured by the cellular service provider and does not need to be set up or changed. If the HSDPA connection requires manual set up, you must obtain the specific settings from the cellular service provider and do the following:

1. Tap Settings Connections Connections. Getting Connected 6-1 2. In either group, tap Add a new modem connection. 3. In the Enter a name for the connection field, enter a name for the connection. 4. In the Select a modem field, select Cellular Line (HSDPA), and then tap Next. 5. Enter the access point name provided by the cellular service provider, and tap Next. 6. Enter the username and password, and tap Finish. Setting up a Dial-up Connection NOTE:

Depending on the wireless service provider, dial-up connections may or may not be supported. With dial-up, the service provider gives a phone number that connects the device to the Internet. 1. Tap Settings Connections Connections. 2. In either group, tap Add a new modem connection. 3. In the Enter a name for the connection field, enter a name for the connection. 4. In the Select a modem field, select Cellular Line, and then tap Next. 5. Enter the phone number provided by the service provider, and tap Next. 6. Enter the username and password, and tap Finish. Getting Connected 6-2 Using Wireless Network The device has a built-in wireless network module. If the device is within a wireless LAN

(WLAN) environment, it can connect to the network without any cables. Switching On or Off the Wi-Fi Radio By default, the Wi-Fi radio is turned off. To turn on or off the Wi-Fi radio:

1. Tap the WiFi icon on the Home screen to access Wireless Manager. 2. Tap the Wi-Fi box to change the Wi-Fi radio status from Off to Available. When the Wi-Fi radio is on, the Wi-Fi radio status on the Home screen will be displayed as Available. To turn off the Wi-Fi radio, follow the above procedure, but tap the Wi-Fi box to change the Wi-Fi radio status from Available to Off. The Wi-Fi radio status on the Home screen will be displayed as Off. Connecting to a Wireless Network 1. Turn on the Wi-Fi radio. 2. Tap Menu Wi-Fi Settings to open the Wireless Networks Configuration screen. By default, the device will automatically detect available wireless networks. Getting Connected 6-3 3. If more than one network is detected, the screen will display a network list. Tap the desired network and follow the procedure to configure the wireless network. 4. If the selected network requires a network key, enter the key and tap Next Finish on the screen. 5. End the Wi-Fi connection by switching off its radio. NOTE:

Search for a network to connect by tapping Wi-Fi Search for Networks. Settings Connections Once connected to a network, a shortcut is created in Settings. To change the network settings, tap network and change the settings. Leaving the radio on will drain the battery power more quickly. Settings Connections Wi-Fi. Tap the desired Getting Connected 6-4 Using the Bluetooth Function NOTE:

BAP do not guarantee that all Bluetooth headsets/devices from all manufactures are compatible with the device. The device incorporates Bluetooth capability. Bluetooth technology is a short-range

(approximately 10m or 30ft) wireless communications technology. Bluetooth technology features the abilities to do the following:

Beam information, such as files, tasks, contacts, etc, to other Bluetooth supported devices. Connect the device to a Bluetooth enabled phone to be used as a modem. Use a Bluetooth service. When the device is connected to another device or computer, the device can locate and use the services available on the other device or computer. Switching On or Off the Bluetooth Radio By default, the Bluetooth radio is turned off. To turn on Bluetooth, do the following:

1. Tap the Wireless Manager section on the Home screen. 2. Tap the Bluetooth box to change the Bluetooth radio status from Off to On. 3. For other devices with Bluetooth capabilities to detect the device and attempt to beam information to it, establish a connection, or use a Bluetooth service, Tap Setting Bluetooth Mode Make this device visible to other devices. Getting Connected 6-5 4. To turn off the Bluetooth radio, follow the above procedure, but tap the Bluetooth box to change the Bluetooth radio status from On or Visible to Off. The Bluetooth radio status on the Home screen will be displayed as Off. NOTE:

Leaving the radio on will drain the battery power more quickly. Sending Files via the Bluetooth 1. Turn on the Bluetooth radio. Make sure that the device and the device that is receiving the information are within close range and that device is discoverable. 2. From the program, tap and hold the desired item. 3. Tap Beam File in the shortcut menu. Getting Connected 6-6 4. The device will search for other devices with Bluetooth capabilities within close range, and will display them in the list. Tap the desired destination device. Note:

Files are saved automatically before they are beamed. If a Word document or Excel workbook was created on a computer, unsupported content and formatting may be lost when the files are saved. Receiving Files via Bluetooth Make sure that Make this device visible to other devices in Bluetooth settings is selected. Make sure that the device and the destination device are within close range and that device is discoverable. When prompted to receive an incoming beam, tap YES to receive. Creating a Bluetooth Partnership A Bluetooth partnership is a connection that allows for secure information exchange via Bluetooth technology. When a partnership between two devices is created, the devices Getting Connected 6-7 do not need to be discoverable for secure information exchange. A matching passkey is required on both devices to create a partnership. A Bluetooth partnership will work as long as the Bluetooth function is turned on. 1. Turn both devices, set them to discoverable, and place them in close range. 2. Tap Settings Bluetooth Devices Add new device. 3. The device will search for other devices with Bluetooth capabilities and display them in the list. 4. Tap the name of the other device, and tap Next. 5. In Passkey, enter an alphanumeric passkey between 1 and 16 characters, and tap Next. 6. Enter the same passkey on the other device. 7. Tap Done. Getting Connected 6-8 Chapter 7 Troubleshooting and Maintenance This chapter gives solutions to common device problems you may encounter. It also provides guidelines on taking care of your device. Resetting Your Device If the device stops responding, or appears to be frozen, or is locked up, the device may need resetting. Reset utton Troubleshooting and Maintenance 7-1 Restoring To Factory Default State The device can be restored back to its factory default state by clearing the memory from the device. Restoring the device back to its factory default state should be done in the following cases:

When the device does not respond after being restarted. When the password is forgotten. Caution: Clearing the memory deletes all data, files, system settings, and additional programs that were installed or synchronized!

Note:

Back up data on a computer, storage media, or another device before restoring factory default state. Regular back up of data ensures data integrity during emergency or accidental situations. To clear the memory from the device, proceed with the following:

1. Turn off the system. 2. Press Left soft key (LSK), Right soft key (RSK) and Power button. 3. Release all the keys. A Hive Clean message should appear. 4. Press YES Left soft key Right soft key Power button Troubleshooting and Maintenance 7-2 Troubleshooting NOTE:

If a problem occurs that cannot be solved, contact the dealer for assistance. Problem Solution Power does not switch on when using battery power. Screen responds slowly. The remaining battery power may be too low to run the device. Charge the battery for 20 minutes before use. Make sure that the device is not running out of battery power. If the problem still persists, restart the device. Screen freezes. Restart the device. Cannot establish a connection with a computer via USB. Make sure that the device and the computer are both switched on before trying to establish a connection. Make sure that the cable is securely plugged into the USB port on the computer and on the device. Connect the USB cable directly to the computer. Do not run the cable through a USB hub. In some specific cases, the device may experience connection problems when it is connected to a Windows computer running ActiveSync. To resolve the problems, please tap Connections USB to PC, and then clear Enable advanced network functionality. Settings Problem Solution A warning message of not enough memory appears. Delete unneeded files. Remove unneeded programs. Troubleshooting and Maintenance 7-3 Delete all files and clear history in Internet Explorer. Stop programs that are not being currently used. To check the state of active programs, tap Settings System Task Manager. To stop the program by tapping End Task. Restart the device. Move the data/file to the storage card using file explorer. Move Email attachments to storage card. Caring for Your Device Proper maintenance of the device will ensure trouble-free operation and reduce the risk of damage to the device. Keep the device away from excessive moisture and extreme temperatures. Avoid exposing the device to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of the device or drop objects on the device. Do not drop the device or subject it to severe shock. Do not expose the device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage the device. In the event of moisture condensation, allow the device to dry out completely before next use. The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. Never clean the device with it powered on. Use a soft, lint-free cloth to wipe Troubleshooting and Maintenance 7-4 the screen and the exterior of the device. Do not use paper towels to clean the screen. Never attempt to disassemble, repair or make any modifications to the device. Disassembly, modification or any attempt at repair could cause damage to the device and may even cause bodily or property damage. Disassembly or modification of the device voids the warranty of the device. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the device, its parts, or its accessories. Safety Precautions Prolonged listening of music at maximum volume can damage the ears. The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure. About Charging Use only the AC adapter supplied with your device. Use of another type of AC adapter will result in malfunction and/or danger. Use only the car charger supplied by the manufacturer. Use of another type of car charger will result in malfunction and/or danger. Use a specified cradle approved by the manufacturer. Use a specified battery. About the Charger Do not use the charger in a high moisture environment. Never touch the charger with wet hands, feet, or any other body part. Allow adequate ventilation around the charger when using it to operate the device Troubleshooting and Maintenance 7-5 or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case. Connect the charger to a proper power source. If damaged, replace the charger with a manufacturers approved charger. Once damaged, the charger cannot be repaired. About the Battery Use a specified charger approved by the manufacturer. Do not place the batter in fire. The battery can burst or explode, releasing hazardous chemicals. Important instructions Caution:

Dispose or recycle used batteries according to the instructions. Only use a replacement battery recommended by the manufacturer. The battery should only be used in the specified device. Notices FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna. Troubleshooting and Maintenance 7-6

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. Troubleshooting and Maintenance 7-7 The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID: ZK7SSERIES-A Troubleshooting and Maintenance 7-8 Chapter 8 GeoAssist Software Starting GeoAssist GeoAssist is a GPS utility, designed specifically for the Flint, that allows the end user to view the status of the GPS and allows the user to configure the GPS and optimize it for the environment for which it will be used. This instruction guide will show you all of the features and their application. GeoAssist Settings GPS Tab The GPS Tab allows you to set up the connection settings for the GPS, Start/Stop the GPS communications as well as Exit the program. The GPS Settings for the Flint handheld should be set to use COM 9 as the communications port and the baud rate should be set to 9600. Next, set the additional NMEA sentences you would like to have enabled. The GST string reports the GPS Pseudorange Error (Noise) Statistics. GeoAssist Software 8-1 You can also force the GPS to run continuously, even though the system is turned off. This enables immediate GPS positioning when the unit it turned on. To enable this, select the System tab end activate the check box. When satisfied, press the Apply button and then Start to start the GPS. GeoAssist will access COM 9 and, once locked onto satellites, display the GPS data. GeoAssist Software 8-2 Satellite Detail Tab The Satellite Detail tab gives you information regarding each satellite being used:

PRN: Pseudo-Random Noise (unique identifier for each satellite) SNR: Signal to Noise Ratio Active: Used in Position True/False Azimuth: Position in the Sky From True North Elevation: Elevation of Satellite Above the Horizon GeoAssist Software 8-3 Use Mode Tab Link Mode:

Autonomous Profile:

1. Default offers no enhanced settings or filter algorithms;

2. Precise Point Positioning Precision, Open Sky GeoAssist Software 8-4 3. For Canopy Environments Precision, High-Multipath Environments SBAS SBAS is enabled by default to automatically (auto-scan) locate the SBAS for the local position. The GeoAssist Premium version gives you the following control over SBAS:

Subsystem:

1. Disable Turn SBAS off 2. Enable Turn SBAS on PRN Codes Choose the SBAS that system that best fits your needs Press Apply when ready (In order for Apply to be active, the GPS must be started) Network DGPS Host: Enter your host name IP Address Port: Enter the Port given by provider User ID: Enter your User ID Password: Enter your Password Advanced Some NTRIP Servers require the GGA string in order to process the correction, here you can set from where the GGA string is sent. When the settings are correct, press the Connect button GeoAssist Software 8-5 Log Tab

.nmea Data The Log Tab gives you the ability to store NMEA data in a .nmea file. This will not store feature, attribute or value data, just the raw .nmea string from the gps receiver. Choose a storage location, then press Start. When you are finished, press Stop. GeoAssist Software 8-6 GeoAssist Software 8-7

.bp1 (Binary) Data The Flint is capable of storing Binary data as well. This works in much the same way as logging .nmea data. This data can be converted to RINEX format for post-processing. This process requires the BAP RINEX Data Converter for Desktop. GeoAssist Software 8-8 About Tab The About Tab validates your license edition as well as version. GeoAssist Software 8-9 Chapter 9 Recommended Settings GPS Settings and Best Practices Starting the GPS: Open GeoAssist and start the GPS. Choose the Mode tab and select the mode for which you want to use the GPS. Leave GeoAssist running while in use and collecting data. GPS COM Port: COM 9 GPS Baud Rate: 9600 While in Canopy mode, it is best to walk directly to target and stop to collect data. Wandering around target or moving the unit aimlessly may cause inaccurate data. If GPS performance is slow, reset the handheld. Handheld Settings and Best Practices Begin each day by resetting the handheld. This is normal practice for most devices and will help with performance. For best results and when possible, charge the device via the provided AC wall charger or desktop battery charger. Charging via the auto adapter or USB may take the unit longer to reach a full charge. Recommended Settings 9-1 Chapter 10 Warranty Information Warranty Terms What this Limited Warranty Covers F4Devices warrants that for a period of 2 years from date of purchase (the "Limited Warranty Period"), the Flint S-Series Handheld device (the Flint or the Product) will be materially free from defects under normal use and service. Batteries are warranted only for 6 months from date of purchase. All other accessories are warranted for a period of 1 year from date of purchase. This limited warranty begins on the original date of purchase and continues through the Limited Warranty Period. It is valid only on Flint devices purchased from a Flint authorized reseller. Warranties are non-transferrable and are considered and agreement between F4Devices and the original purchaser. What this Limited Warranty Does Not Cover Opening or dismantling of the Flint handheld device voids all warranties immediately. This Limited Warranty does not cover:

a. damage as a result of accident, misuse, or abuse;

b. damage as a result of fire, water, lightning or other acts of nature;

c. cosmetic damage, such as to the exterior finish;

d. damage from applications and uses for which this product was not intended;

Warranty Information 10-1 e. damage as a result of virus infection; password setting or resetting;

f. damage by modification without the prior written authorization of Flint;

g. damage as a result of service by anyone other than Flint or Flints authorized agent;

h. damage as a result of normal wear and tear;

i. damage as a result of reconfiguration changes to the shipped product (either hardware or software);

j. damage by breakage of the liquid crystal display (LCD);

k. if the Product serial number has been removed, defaced or altered;

l. if F4Devices or one of its authorized agents was not notified of the defect within the Limited Warranty Period;

m. reception or display problems and distortion related to noise, echo, interference or other signal transmission and delivery problems;

n. burned-in images resulting from viewing an image on the display screen for an extended period of time;

o. minor imperfections within design specifications or that do not materially alter functionality;

p. adjustments and failure to follow operating instructions, instructions for installing a user-installable part, or cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book, including incorrect installation of hardware or software; and q. use of products, equipment, systems, utilities, services, parts supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by Flint. What F4Devices Will Do to Correct Problems If the Product is found to be defective as a result of manufacturing defects in materials and workmanship during the Limited Warranty Period, F4Devices will, at its sole option

(1) repair or replace the Product, at no charge, with new or refurbished parts or with a Warranty Information 10-2 new or refurbished functionally equivalent product, or (2) provide a refund of the purchase price of the Product, LESS THE PRODUCTS DEPRECIATED VALUE. [Do we want to use a depreciated price? If so, we need to explain how the depreciation will be calculated.]

The Limited Warranty Period for the repaired or replaced Product will end on the termination date of the Limited Warranty Period of the original Product. How Do I Obtain Warranty Service?

Before any warranty service will be provided, the purchaser must register their device at www.f4devices.com/register. If the product fails during the Limited Warranty Period, for reasons covered by this Limited Warranty, you must immediately notify F4Devices or one of its authorized agents at time of such failure. For more information on where to send your Flint Handheld for repair, please contact F4Devices or your Reseller. In the event the Reseller is no longer available, please contact F4Devices directly and you will receive instructions on how to proceed. Limitation of Liability This Limited Warranty is the final, complete and exclusive agreement between F4Devices and the purchaser. This warranty is governed by the State of Florida without reference to its conflict of law provisions. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS LIMITED WARRANTY PERIODS STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON F4DEVICES. F4DEVICES ASSUMES NO RESPONSIBILITY THAT THE PRODUCT WILL BE FIT FOR ANY PARTICULAR PURPOSE FOR WHICH YOU MAY BE BUYING THE PRODUCT, EXCEPT AS OTHERWISE PROVIDED IN THIS LIMITED WARRANTY OR IN APPLICABLE LAW. Warranty Information 10-3 F4DEVICES SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF F4DEVICES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO RECOVERY OF ANY KIND AGAINST F4DEVICES SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY F4DEVICES AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF F4DEVICES. THIS LIMITED WARRANTY STATES YOUR EXCLUSIVE REMEDY. If there is any inconsistency between this Limited Warranty and any other agreement or statement included with or relating to the F4Devices products or services, this limited warranty shall govern. If any provision of this limited warranty is found invalid or unenforceable, it shall be deemed modified to the minimum extent necessary to make it enforceable and the remainder of the limited warranty shall remain valid and enforceable according to its terms. How State Law Relates to this Limited Warranty Some states, provinces or territories do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Some states may provide for additional warranty rights and remedies, and the provisions contained in this limited warranty are not intended to limit, modify, take away from, disclaim or exclude any mandatory warranty requirements provided by states, including certain implied warranties. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Additional Warranty Coverage Available for an Additional Fee Extension of Limited Warranty Period Warranty Information 10-4 For an additional fee, an extension of the Limited Warranty Period is available in 12 month intervals for limited warranty coverage of up to 4 years total. The additional warranty can extend the Limited Warranty Period for up to the specified additional time purchased, but in no event shall the Limited Warranty Period be extended beyond four years from the date of purchase. No Fault Warranty For an additional fee, a No Fault Warranty is available for purchase at time of initial Flint purchase. No Fault Warranties cannot be purchased at a later date.

***IMPORTANT***

If you choose to purchase the No Fault Warranty, Know This: The No Fault Warranty only applies to the first year of original ownership and covers ANY accident that may occur. This warranty can only be used only once and should be viewed as a Get Out Of Jail Free card for the customers protection. Once the No Fault Warranty has been used, it is no longer available, even if the Product is damaged again within the first year of ownership. In order to receive the warranty, F4Devices must be notified of the damage claim and receive the damaged Product within the warranty period before replacement or remedy occurs. The No Fault Warranty does not cover theft or loss. Warranty Information 10-5