all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.57 MiB | March 07 2013 / May 07 2013 | |||
1 | Cover Letter(s) | March 07 2013 / May 07 2013 | ||||||
1 | Cover Letter(s) | March 07 2013 / May 07 2013 | ||||||
1 | Cover Letter(s) | March 07 2013 / May 07 2013 | ||||||
1 | External Photos | March 07 2013 / May 07 2013 | ||||||
1 | Internal Photos | March 07 2013 / May 07 2013 | ||||||
1 | ID Label/Location Info | March 07 2013 / May 07 2013 | ||||||
1 | Test Report | March 07 2013 / May 07 2013 | ||||||
1 | Test Setup Photos | March 07 2013 / May 07 2013 |
1 | User manual | Users Manual | 1.57 MiB | March 07 2013 / May 07 2013 |
Zivo Smart TerminalTM User Manual UM.ZV.1012.01 Revision 1 October 09, 2012 JAOtech Ltd Zivo Smart TerminalTM Contents Revisions & amendment record Introduction Copyright 0.1 0.2 Disclaimer 0.3 Life support policy 0.4 Acknowledgements 0.5 0.6 0.7 Technical support 0.8 Product warranty 0.9 Safety instructions 0.10 Packing list FCC interference statement class B JAOtech customer services Chapter 1 General information Introduction 1.1 1.2 Specifications 1.2.1 General 1.2.2 Handset specifications 1.2.3 Camera specifications 1.2.4 Other optional peripherals 1.3 Cleaning 1.4 Dimensions Chapter 2 System setup 2.1 A quick tour of the Zivo 2.2 Installation procedures 2.2.1 Connecting the power cord 2.2.2 Connecting the keyboard and mouse 2.2.3 Switching on the power 2.3 Running the BIOS setup program 2.4 2.5 Installing system software Installing the drivers Chapter 3 Graphic chipset setup Introduction 3.1 3.1.1 Chipset 3.1.2 Display memory 3.1.3 LVDS transmitter 3.1.4 Display types 3.2 3.3 Installation for Windows XP Further information Chapter 4 Audio interface 4.1 Introduction 4.2 Audio system 4.3 Installation of audio driver 4 5 5 5 6 7 7 7 8 9 11 12 13 13 15 15 16 16 17 18 21 21 21 21 22 22 22 23 23 23 23 23 23 23 24 24 24 www.jaotech.com Commercial in Confidence 1 UM.ZV.1012.01 Zivo Smart TerminalTM Further information 4.3.1 Installation for Windows 2000 XP 4.4 Chapter 5 Touch screen interface Introduction 5.1 5.1.1 General information 5.1.2 General specifications 5.1.3 Environmental specifications 5.2 5.2.1 Installation for Windows 5.3 Further information Installation of touch screen drivers 24 25 26 26 26 26 27 27 27 www.jaotech.com Commercial in Confidence 2 UM.ZV.1012.01 Zivo Smart TerminalTM Appendix Appendix A Mother board layout Atom with Intel 945GSE Appendix B Jumpers and connectors Jumpers setting Connectors A.1 B.1 B.2 Appendix C Hardware installation C.1 Overview of hardware installation and upgrading C.2 Disassembling the terminal C.3 C.4 Installing the 2.5" Hard Disk Drive (HDD) Installing the Central Processing Unit (CPU) Appendix D VESA mounting Appendix E Desk Stand Installing the Smart Terminal to the Desk Stand E.1 E.2 Safety Instructions 28 29 30 36 36 37 37 38 40 40 www.jaotech.com Commercial in Confidence 3 UM.ZV.1012.01 Zivo Smart TerminalTM Revisions & Amendment Record Issue No. Section Date Reason A B July 20, 2010 Feb 18, 2011 01 Oct. 09, 2012 p.5 p.10 p.10 p.11 P.11 p.14 p.19 p.20 p.20 p.21 p.32 p.35 p.40 First draft Remove Core Duo and 945GME specifications Remove COM1 spec. Remove IR spec. Remove Sonitor spec. Remove Life Support Policy Modify Classification to Technology Equipment only Remove information of Medical Electrical Equipment Remove descriptions regarding IEC704-1:1982 Add note Remove note Add icon and description for RJ11 socket of handset Change Power Input from 3A to 4.74A Figure 2.3: Rear view of the Zivo Smart Terminal Figure 2.4: I/O Ports of the Zivo Smart Terminal (up) Remove Figure 2.4, point 1. Modify point 6. to 8P8C+Fin Service Call Connector Modify Nurse Call Device of 26-Way MDR Connector to Service Call Device Figure 2.5: Connecting the power cord Modify Pin name from NURSEX to SERVICEX Modify Nurse call connector (JNURx) to Service call connector (JNURx) Modify Pin name from NURSEX to SERVICEX. Add Appendix E: Desk Stand www.jaotech.com Commercial in Confidence 4 UM.ZV.1012.01 Zivo Smart TerminalTM Introduction Copyright This document is copyrighted, 2007. All rights are reserved by JAOtech Ltd. JAOtech Ltd. reserves the right to make changes to its products without prior notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of JAOtech Ltd. Information provided in this manual is intended to be accurate and reliable. However, JAOtech Ltd. assumes no responsibility for its use, or for any infringements upon the rights of third parties that may result from such use. Disclaimer JAOtech Ltd. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual. JAOtech Ltd. assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. JAOtech Ltd. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. www.jaotech.com Commercial in Confidence 5 UM.ZV.1012.01 Zivo Smart TerminalTM Acknowledgements Award is a trademark of Award Software International, Inc. IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel, Pentium, Core, Celeron and Atom are trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. RTL is a trademark of Realtek Semiconductor Co., Ltd. Creative is a trademark of Creative Technology LTD. All other product names or trademarks are properties of their respective owners. This manual is for the Zivo Smart TerminalTM. www.jaotech.com Commercial in Confidence 6 UM.ZV.1012.01 Zivo Smart TerminalTM FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice:
(1) An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. JAOtech customer services Each and every JAOtech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Zivo Smart TerminalTM is destined for the laboratory or the hospital ward, you can be assured that your product will provide the reliability and ease of operation for which the name JAOtech has come to be known. Your satisfaction is our primary concern. Here is a guide to JAOtechs customer services. To ensure you get the full benefit of our services, please follow the instructions below carefully. Technical support We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can find answers in your product documentation. These answers are normally more detailed than the ones we can give over the phone. So please consult the user manual first. If you still cannot find the answer, gather all the information or questions that apply to your problem and with the product close at hand, call your local JAOtech office, or e-mail us. We are ready to give you the support you need to get the most from your products. In fact, most problems reported are minor and are able to be easily resolved over the phone. www.jaotech.com Commercial in Confidence 7 UM.ZV.1012.01 Zivo Smart TerminalTM Product warranty JAOtech Ltd. warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorised by JAOtech, or which have been subject to misuse, abuse, accident or improper installation. JAOtech assumes no liability under the terms of this warranty as a consequence of such events. Because of JAOtechs high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If any of JAOtechs products is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time, and freight. Please consult your local JAOtech office or reseller for more details. If you think you have a defective product, follow these steps:
1. Visit the JAOtech website at www.jaotech.com where you can find the latest information about the product. 2. Contact your JAOtech reseller, sales representative, or JAOtechs customer service center for technical support if you need additional assistance. Please have the following information ready before you call:
Product name and serial number Description of your peripheral attachments Description of your software (operating system, version, application software, etc.) A complete description of the problem The exact wording of any error messages Note: This equipment is a source of electromagnetic waves. Before use please, make sure that there are no EMI sensitive devices nearby which may malfunction. Warning 1. Input voltage rated 100-240 VAC, 50-60 Hz, 4-2 A (AC Mode) 2. Use a 3 V @ 195 mA lithium battery 3. Packing: please carry the unit with both hands, handle with care 4. Maintenance: to properly maintain and clean the surfaces, use only approved products or clean with dry applicator. In environments where specific chemicals or cleaning agents are required to be used, please contact JAOtech Selon les demieres RSS-210 et CNR-GEN Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit acceptertout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. www.jaotech.com Commercial in Confidence 8 UM.ZV.1012.01 Zivo Smart TerminalTM Safety instructions 1. Read these safety instructions carefully. 2. Keep this user manual for later reference. 3. Keep this equipment away from humidity. 4. Place the terminal on a stable surface or hang from a reliable structure during installation. Dropping the equipment is likely to cause damage. 5. The vents on the enclosure are for air convection and protect the equipment from overheating. DO NOT COVER THE VENTS. 6. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. 7. Position the power cord so that it is not a hazard. Do not place anything over the power cord. 8. Please take note of all the cautions and warnings on the equipment. 9. The Smart terminals should be cleaned regularly according to usage. Standard computer monitor cleaning methods and wipes are suitable for this purpose. In environments where specific chemicals or cleaning agents are used, please contact your local JAOtech office. 10. If the equipment is out of use for an extended period, make sure to disconnect it from the power source to avoid damage in the event of a power surge. 11. Do not pour any liquid into the vents on the terminal. This may cause fire or electrical shock. 12. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. 13. If one of the following situations arises, ensure you get the equipment checked by service personnel:
a. The power cord or plug is damaged. b. The equipment has been exposed to moisture. c. The equipment is not functioning properly, or you cannot get it to work according to the user manual. d. The equipment has been dropped and damaged. e. The equipment has obvious signs of breakage. 14. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20C (-4F) OR ABOVE 60C
(140F). THIS MAY DAMAGE THE EQUIPMENT. 15. If your computer is losing time or the BIOS configuration resets to default settings, the battery has no power. Caution: Do not replace the battery yourself. Please contact a qualified technician or your supplier of the Zivo Smart TerminalTM. The Zivo Smart TerminalTM is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. www.jaotech.com Commercial in Confidence 9 UM.ZV.1012.01 Zivo Smart TerminalTM 16. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS PERSONAL INJURY! VESA mount installation should be carried out by a professional technician. Please contact the service technician or your reseller if you need this service. 17. CLASSIFICATION:
According to UL60950 (Technology Equipment) if JAOtechs terminals are used in combination with a standard Class II 2 or 3 pin power adapter this system can be classified as a Class III electrical appliance. 18. To disconnect the device: Remove the rear power supply power connection. 19. Follow national requirements when disposing of the unit. 20. This equipment shall not be used in life support systems. 21. Accessory equipment connected to the analog and digital interfaces must be in compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.) If in doubt, consult the technical services department or your local representative. 22. The user is not to touch SIP/SOPs and the patient at the same time. Non-ionizing radiation www.jaotech.com Commercial in Confidence 10 UM.ZV.1012.01 Zivo Smart TerminalTM Packing list Before installing your Zivo Smart TerminalTM, ensure that the following parts have been received in the box:
Zivo Smart TerminalTM User manual PSU & Power cord - USA, European, UK types (where applicable) Handset & Coiled Cable (where applicable) Accessories for Zivo Smart TerminalTM (where applicable) Warning: To prevent electric shock, DO NOT remove covers. No user serviceable parts inside, refer servicing to qualified personnel. Note: This RJ11 socket is for handset connection only. www.jaotech.com Commercial in Confidence 11 UM.ZV.1012.01 Zivo Smart TerminalTM CHAPTER 1 General information This chapter gives an overview of the Zivo Smart TerminalTM, sections include:
Introduction Specifications Cleaning/Disinfecting LCD Specifications Dimensions 1.1 Introduction The Zivo is a multimedia Intel Atom processor-based computer that is designed to serve as a Point of Care (POC) and Point of Information terminal (POI) within healthcare applications. It is a PC based system with 15" color TFT LCD display, Gigabit Ethernet, multi-COM port and USB 2.0 interfaces and High Definition Audio codec. The Zivo Smart TerminalTM is as compact and user-friendly as a notebook computer. This simple, complete and highly integrated multimedia system lets system integrators easily build the Zivo Smart TerminalTM into their applications. www.jaotech.com Commercial in Confidence 12 UM.ZV.1012.01 Zivo Smart TerminalTM 1.2 Specifications 1.2.1 General Display screen Type Colour depth Response time Dot size Viewing angle Luminance Contrast ratio LCD MTBF Touch screen Touch screen Software driver 15" SXGA TFT (1024 x 768 resolution) 16.2 M 5ms 0.3 x 0.3 170/160 Hor./Vert. 300 cd/m Typ 1000:1 Typ 50,000 Hrs Typ Resistive 5-Wire Linux/Windows Durability (touches in a lifetime) 35 million finger touches/10 million pen touches Light transmission Touch controller Environment Temperature Relative humidity Storage temperature 82%
Internal USB 0 ~ 40C 10 ~ 40C / 20 ~ 90% RH
-40C ~ 60C / 20 Storage relative humidity 10 ~ 80% RH Atmospheric pressure range 500 to 1060hPa Shock Vibration Power MTBF Altitudes 30G, Half Sine, 11msec 5 ~ 500Hz 1G acceleration non operating 100,000 hrs Operational: 6,000 ft; shipping:40,000 ft Peripherals and device interfaces Headphone socket Microphone socket Phone handset RJ11 socket User controls USB ports 2 x 3.5mm jack socket in connector recess 1 x 3.5mm jack socket in connector recess RJ11 socket Mounted on phone cradle Front membrane /capacitive buttons and 1 mechanical switch 2 x USB2.0 sockets in connector recess, 2 x on rear I/O www.jaotech.com Commercial in Confidence 13 UM.ZV.1012.01 Zivo Smart TerminalTM Peripherals Multifunction connector with USB, serial, audio and power Visual call indication Call indication visible from LED array on front and back of terminal Reset switch Power switch Display inverter Computing platform CPU Northbridge Southbridge I/O companion System memory 3D graphics Video memory Audio Storage Internal push button behind the RAM door Internal push button behind the RAM door Power enable and brightness control Intel Atom based Processor Intel 945GSE chipset Intel I/O controller hub 7 mobile (ICH7M) Winbond W83627EHG or similar 200-pin DDRII 667/533/400 SODIMM socket Intel 945GSE integrated extreme graphics controller Intel DVMT 3.0 Supports up to 224MB shared video memory Realtek ALC888 High Definition Audio Codec 1 x 2.5 SATA disk connector with power, 1 x SATA data connector, 1 x compact flash socket Serial ports 6 x RS232 USB GPIO 4 x External, 1 x internal A-type socket, 3 x internal headers, 1 x external multi-signal connector Keypad, hook sensor, buzzer, indicator lights, audio input/output controls, internal headers Thermal protection Internal sensors generate interrupt Watchdog LAN Power input Audio Amplifier Programmable up to 255 seconds Marvell 88E8053 or Intel 82574L (945GSE only) 19V DC, 4.74A 1.2W RMS headphone output per channel Bass boost 20dB at 50Hz 2 off 6 Watt peak RMS integral speakers Software speaker / headphone mute Call buzzer Incoming telephone call indication Independent control of all audio channels via internal mixer Telephone sub system Dialing Call indicator Software mute Piezo ringer On screen by software Software controlled piezo ringer and call indicator lights www.jaotech.com Commercial in Confidence 14 UM.ZV.1012.01 Zivo Smart TerminalTM Peripheral devices Hard drive Compact flash Operating system Primary Mechanical specifications Plastic materials Mounting IP rating Dimensions Weight Power consumption Up to 160GB HDD Slave on secondary IDE port Linux, Windows PC/ABS: IDES C6200 UL94-V0 + Anti bacteria PC: GE 945A UL94-V0 + Anti bacteria Rear fixture VESA 75mm x M6 IP64 Front Face, IP52 Rear 384 x 354 x 70 (mm) (Without handset) 4 kg 50 Watts Fanless design, rear heat sink and heat pipe dissipating up to 40W Cooling 1.2.2 Handset specifications Handset Keypad Cable Type Interface Audio sub system Amplifier None, keypad mapped on display Retractable handset coiled cable RJ11 connection Integrated on motherboard Disability features Inductive loop pickup for hearing aids Adjustable volume via software Mechanical specifications Mounting Dimensions Hook and cradle located on side of terminal 52 w x 64 d x 205 h (mm) 400g Weight 1.2.3 Camera specifications Camera Resolution Focus Frame rate 1.3 Megapixel (1280 x 1024) Fixed 60cm - infinity 640x480 @ 30fps; 1280x1024 @ 8fps www.jaotech.com Commercial in Confidence 15 UM.ZV.1012.01 Zivo Smart TerminalTM 1.2.4 Other optional peripherals For other optional peripherals please contact JAOtech Ltd. for more information. 1.3 Cleaning During normal use the Zivo will become soiled and should be regularly cleaned. Examples of approved cleaning agents:
Green tinctured soap and Enzymatic detergents Mediwipes Vernacare wipes 1. Prepare agent per manufacturers instructions or hospital protocol. 2. Wipe the Zivo with a clean cloth that has been moistened in the cleaning solution. 3. Wipe thoroughly with a clean cloth. The Zivo Smart Terminals surfaces are resistant to the following cleaning materials:
Isopropyl alcohol Ammonia-based glass cleaners Turpentine Mineral spirits Cautions:
Do not immerse or rinse the Zivo and its peripherals. If you accidentally spill liquid on the device, disconnect the unit from the power source. Contact your Biomed regarding the continued safety of the unit before placing it back in operation. Do not spray cleaning agent on the chassis. Do not use disinfectants that contain phenol. Do not autoclave or clean the Zivo Smart TerminalTM or its peripherals with strong aromatic, chlorinated, ketone, ether, or ester solvents, sharp tools or abrasives. Never immerse electrical connectors in water or other liquids. In environments where specific chemicals or cleaning agents are required to be used, please contact JAOtech. www.jaotech.com Commercial in Confidence 16 UM.ZV.1012.01 Zivo Smart TerminalTM 1.4 Dimensions Figure 1.1: Dimensions of the Zivo Smart TerminalTM www.jaotech.com Commercial in Confidence 17 UM.ZV.1012.01 Zivo Smart TerminalTM CHAPTER 2 System setup This chapter gives hardware and system software installation information. Sections include:
Installation procedures A quick tour of the Zivo Smart TerminalTM Running the BIOS setup program Installing system software Installing drivers 2.1 A quick tour of the Zivo Before you set up the Zivo, take a moment to become familiar with the locations and functions of the controls, drives, connections and ports, which are illustrated in the figures below. When you place the Zivo upright on the desktop, its front panel appears as shown in Figure 2.1. Figure 2.1: Front View of the Zivo Smart TerminalTM Membrane which contains functions for Volume Up/Down, Phone, Menu, Power, Information, TV, and Channel Up/Down. When you look at the left side of the Zivo, you will see the Handset fitted to one of the Zivos docking ports. www.jaotech.com Commercial in Confidence 18 UM.ZV.1012.01 Zivo Smart TerminalTM Figure 2.2: Left side view of the Zivo Smart TerminalTM On the rear of the Zivo you will find the two removable access doors located left and right of the terminal. The right-hand cover provides access to the system DDR memory and a mini PCIe slot, and the left-hand cover provides access to the HDD as shown in Figure 2.3. Figure 2.3: Rear view of the Zivo Smart TerminalTM www.jaotech.com Commercial in Confidence 19 UM.ZV.1012.01 Zivo Smart TerminalTM There are two I/O areas in the Zivo Smart TerminalTM; one is at the back and the other one is at the bottom. Figure 2.4 indicates the various ports of these two areas. Figure 2.4: I/O Ports of the Zivo Smart TerminalTM Back I/O area 1. Coaxial TV Antenna/Cable Connector (optional);
2. USB Connector (2x);
3. Power Connector;
4. RJ 45 Shielded Gigabit Ethernet Connector;
5. 8P8C+Fin Service Call Connector. Bottom I/O area 1. 26-Way MDR Connector (for optional remote control or a Service Call device);
2. DVI-I Connector;
3. Headset Jack (2x);
4. Microphone Jack;
5. USB Connector (2x). www.jaotech.com Commercial in Confidence 20 UM.ZV.1012.01 Zivo Smart TerminalTM 2.2 Installation procedures 2.2.1 Connecting the power cord Always handle the power cord by holding the plug end only. Follow these steps:
1. Connect the male end of the power supply DIN cable to the DC inlet of the Zivo Smart TerminalTM. (See Figure 2.5) 2. Connect the male plug of the power supply to an electrical outlet. Figure 2.5: Connecting the power cord 2.2.2 Connecting USB keyboard and mouse Connect the mouse and keyboard to the USB ports located on the bottom cover of the Zivo Smart TerminalTM. (See Figure 2.6) Figure 2.6: Connecting the mouse and keyboard 2.2.3 Switching on the power Switch on the Zivo Smart TerminalTM via the power switch on the front cover. (See Figure 2.7) Figure 2.7: Switching on the power www.jaotech.com Commercial in Confidence 21 UM.ZV.1012.01 Zivo Smart TerminalTM 2.3 Running the BIOS setup program Your Zivo is likely to have been properly set up and configured by your dealer prior to delivery. If you still find it necessary to use the BIOS (Basic Input-Output System) setup program to change system configuration information please contact your JAOtech supplier for support, or email JAOtech at: techsupport@jaotech.com. The settings you specify with the setup program are recorded in a special area of memory called CMOS RAM. This memory is backed up by a battery so that it will not be erased when you turn off or reset the system. Whenever you turn on the power, the system reads the settings stored in CMOS RAM and compares them to the equipment check conducted during the power on self-test (POST). If an error occurs, an error message will be displayed on screen, and you will be prompted to run the setup program. 2.4 Installing system software Recent releases of operating systems from major vendors include setup programs which load automatically and guide you through hard disk preparation and operating system installation. The guidelines below will help you determine the steps necessary to install your operating system on the Zivo Smart TerminalTM. If required, insert your operating systems installation or setup disc into a portable optical drive and plug into one of the Zivo USB ports. Note: Some distributors and system integrators may have already pre-installed system software prior to shipment of your Smart TerminalTM. If you are presented with a setup/installation screen then carefully follow the instructions. The setup program will guide you through preparation of your hard drive, and installation of the operating system. 2.5 Installing the drivers After installing the system software, you will be able to install the necessary drivers. All the Zivo drivers and updates can be obtained from JAOtech. Note: The drivers and utilities used for the Zivo Smart TerminalTM are subject to change without notice. If in doubt, check with your local JAOtech office or contact our application engineers for the latest information regarding drivers and utilities. www.jaotech.com Commercial in Confidence 22 UM.ZV.1012.01 Zivo Smart TerminalTM CHAPTER 3 Graphic chipset setup This chapter gives details of graphics chipset setup. Sections include:
Introduction Installation of graphic driver Further information 3.1 Introduction The Zivo has an onboard VGA interface. The specifications and features are described as follows:
3.1.1 Chipset The Zivo uses Mobile Intel 945GSE chipset for its graphic controller which enables excellent graphics performance and low power consumption. 3.1.2 Display memory Intel DVMT 3.0 Supports up to 224MB shared video memory. 3.1.3 LVDS transmitter The Zivo uses a Chrontel CH7308/7307 for driving its LCD panel. The controller supports 18-
bit/24-bit single or dual channel LCD panels. 3.1.4 Display types CRT+LVDS simultaneous display with single, clone or extended display configuration. 3.2 Installation for Windows For windows installations, please refer to your installation instructions and install via a portable optical drive connected through one of the Zivo USB ports. 3.3 Further information For further information about the Zivo Smart TerminalTM, including driver updates, troubleshooting guides and FAQs, please contact your local JAOtech office or reseller. www.jaotech.com Commercial in Confidence 23 UM.ZV.1012.01 Zivo Smart TerminalTM CHAPTER 4 Audio interface This chapter gives details of audio interface setup. Sections include:
Introduction Audio system Further information Installation of audio driver 4.1 Introduction The Zivo onboard audio interface is a high-performance 7.1+2 Channel High Definition Audio Codec providing 10 DAC channels that simultaneously support 7.1 sound playback, plus 2 channels of independent stereo sound output (multiple streaming). The codec integrates 2 stereo ADCs that can support a stereo microphone, and feature Acoustic Echo Cancellation
(AEC), Beam Forming (BF), and Noise Suppression (NS) technology. 4.2 Audio system The Zivo Smart Terminal TM features a VoIP handset, internal speakers, and three 3.5mm audio jacks for external microphone and speakers. The main features of the audio system are:
Compatible with the Intel High Definition Audio standard One mono microphone input for the VoIP handset One stereo microphone input for internal microphones One mono speaker output for the VoIP handset One stereo speaker output for internal speakers Each input and output is controllable through GPIO Two 3.5mm audio jacks with jack sensing capability for external speakers One 3.5mm microphone jack with jack sensing capability for external microphone 4.3 Installation of Audio driver Before installing the audio driver, please take note of the procedures detailed below. You must know which operating system you are using in your Zivo, and then refer to the corresponding installation flow chart. Just follow the steps in the flow chart. You can quickly and successfully complete the installation, even if you are not familiar with instructions for Windows. Important: It is important that you follow the flow chart instructions and instructions on the screen. 4.3.1 Installation for Windows 2000/XP 1. Click the Start button in the task bar, click Run and then select infinst_autol.exe from the drive directory D:\Audio\ where the driver files are stored. The Install dialog will appear. 2. Click Next to continue. www.jaotech.com Commercial in Confidence 24 UM.ZV.1012.01 Zivo Smart TerminalTM 3. When the Setup Complete message appears click Finish to restart your computer. 4.4 Further information For further information about the Audio interface installation in your Zivo including driver updates, troubleshooting guides and FAQs please contact your local JAOtech office or reseller. www.jaotech.com Commercial in Confidence 25 UM.ZV.1012.01 Zivo Smart TerminalTM CHAPTER 5 Touch screen interface This chapter gives details of touch screen interface setup. Sections include:
Introduction Installation of Touch Screen Drivers Further Information improved scratch-resistant 5.1 Introduction 5.1.1 General information The Zivo touch screen incorporates advanced second-generation 5-wire resistive technology which allows 85% light transmission. The resistive touch screen has an antiglare surface and new from UL-recognized components. When properly installed, the touch screens ball impact resistance meets the UL 1950 standard. Its fire resistance meets the UL-746C, 19 mm (0.75") flame test standard. The Zivo Smart TerminalTM which incorporates touch screen, controller, and cable has been approved to FCC Class A and Class B standards. 5.1.2 General specifications Please refer to Chapter 1, Section 1.2 of this manual. 5.1.3 Environmental specifications Temperature:
is manufactured features and Operating temperature -0 ~ 40C Storage temperature -20 ~ 60C Relative humidity:
Operating 90 RH at 35C Storage 90 RH at 35C for 240 hours, non-condensing Chemical resistance:
The active area of the touch screen is resistant to the following chemicals when exposed for a period of one hour at a temperature of 21C (71F):
Isopropyl alcohol Ammonia-based glass cleaners Turpentine Mineral spirits Foods and beverages In environments where specific chemicals or cleaning agents are used, please contact JAOtech. www.jaotech.com Commercial in Confidence 26 UM.ZV.1012.01 Zivo Smart TerminalTM 5.2 Installation of Touch screen drivers To facilitate installation of the touch screen driver, you should read the instructions in this section carefully before you attempt installation. 5.2.1 Installation for Windows XP Click the Start button in the task bar, click Run and then select the Zivo Touch Screen driver from the driver disk. The Install dialog will appear. Important: It is important that you follow the flow chart instructions and instructions on the screen. 5.3 Further Information For further information about the touch screen installation in your Zivo Smart TerminalTM, including driver updates, troubleshooting guides and FAQs, please contact your local JAOtech office or reseller. www.jaotech.com Commercial in Confidence 27 UM.ZV.1012.01 Zivo Smart TerminalTM APPENDIX A Motherboard layout A.1 Atom with Intel 945GSE www.jaotech.com Commercial in Confidence 28 UM.ZV.1012.01 Zivo Smart TerminalTM APPENDIX B Jumper Setting and Connectors B.1 Jumper Setting LVDS Voltage Selector (JLVDSVx) Pin Voltage 1-2 5V 2-3 3.3V (default) AT/ATX Power Mode Selector (JATx) Pin Mode 1-2 AT 2-3 ATX CMOS Clear Jumper (JCMOSx) Pin Mode 2-3 Protected (default) Clear 1-2 Handset 2 Mode Selector Pin Mode 1-5, 2-6, 3-7, 4-8 5-9, 6-10, 7-11, 8-12 VOIP PSTN Compact Flash Master/Slave Selector (JCFMx) Pin Mode Close Master Open Slave www.jaotech.com Commercial in Confidence 29 UM.ZV.1012.01 Zivo Smart TerminalTM B.2 Connectors USB Headers (JUSBx) 5-pin JST PH series connector, 2.0mm pitch. Pin Signal 1 2 3 4 5 VCC D-
D+
GND SHIELD SATA Disk Connectors (JSATAx) 1 x 2.5 SATA disk connector with power, 1 x SATA data connector. Compact Flash Socket (JCFx) Ethernet Connector (JLANx) Shielded RJ-45 connector Power Input Connector (JPWRx) 19V DC power input jack Serial Port Headers (JCOMx) 12 and 14 pin Hirose DF11 series connector, 2.0mm pitch. Signal COM1 N.A. COM2 RS-232 COM3 TTL COM4 RS-232 COM5 TTL COM6 RS-232/TTL MSR, etc. Purpose N.A. IR/Serial Port Barcode Scanner, etc. Remote Control, etc. Synaptics Touch Module. TTL (+5V) Pin Signal 13 11 9 7 5 3 1 NC
+5V RI RTS GND TxD DCD Pin Signal 14 12 10 8 6 4 2 NC
+3.3V GND CTS DSR DTR RxD RS-232 header Signal
+5V RI RTS GND TxD DCD Pin Signal
+3.3V 12 GND 10 CTS 8 6 DSR DTR 4 RxD 2 COM3 Only (+5V) Signal NC
+5V RI RTS GND TxD DCD Pin Signal 14 12 10 8 6 4 2 NC
+3.3V BAR_SCAN CTS DSR DTR RxD Pin 11 9 7 5 3 1 Pin 13 11 9 7 5 3 1 www.jaotech.com Commercial in Confidence 30 UM.ZV.1012.01 Zivo Smart TerminalTM LVDS LCD Connector (JLVDSx) 20-pin JAE FI-SE20P-HF connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Signal VDD VDD GND GND TX0-
TX0+
GND TX1-
TX1+
GND TX2-
TX2+
GND TXCLK-
TXCLK+
GND TX3-
TX3+
GND GND LCD Inverter Connector (JINVx) 6-pin JST PH series connector, 2.0mmpitch Pin 1 2 3 4 5 6 Signal
+12V GND ENBKL VR 5V PWM Note: Analog brightness control (VR) ranges between 0V (Max brightness) and 5V (Min brightness). Front Panel Buttons Connector (JKEYx) 12-pin Hirose DF11 connector, 2.00mm pitch Pin 11 9 7 5 3 1 Signal NC KEY_VOL-
KEY_PHONE KEY_POWER KEY_MENU KEY_CH+
Pin 12 10 8 6 4 2 Signal KEY_DET GND KEY_VOL+
KEY_TV KEY_INFO KEY_CH-
www.jaotech.com Commercial in Confidence 31 UM.ZV.1012.01 Zivo Smart TerminalTM GPIO Connector (JGPIOx) 8-pin Hirose DF11 connector, 2.0mm pitch. Pin 7 5 3 1 Signal GPI4 GPI3 GPI2 GPI1 Pin Signal 8 6 4 2 GND NC GPO2 GPO1 DVI Connector (JDVIx) Standard DVI-I connector Remote Control Connector (JMDRx) 26-pin MDR connector with multiple signals Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Signal USBVCC USBD+
RxD RI DTR SERVICE1 SERVICE3 SERVICE5 SERVICE7 MIC_IN+
PHONE_GND REM_HANDSET_HOOK REM_HANDSET_GPI1 Pin Signal 14 USBD-
USBGND 15 TxD 16 GND 17 18 DSR SERVICE2 19 SERVICE4 20 SERVICE6 21 22 SERVICE8 23 PH_OUT 24 MIC_IN-
25 26
+5V REM_HANDSET_GPO1 System Power and Reset Buttons (SRST, SPWR) Two internal tact switches Service Call Connector (JNURx) 8P8C connector, unshielded. Pin 1 2 3 4 5 6 7 8 Signal SERVICE1 SERVICE2 SERVICE3 SERVICE4 SERVICE5 SERVICE6 SERVICE7 SERVICE8 www.jaotech.com Commercial in Confidence 32 UM.ZV.1012.01 Zivo Smart TerminalTM LED Connectors (JLEDx) 2-pin JST PH connector, 2.0mm pitch. Pin 1 2 Signal
+5V LED Handset Hook Sensor Connectors (JHOOKx) 4-pin JST PH series connector, 2.0mm pitch. Pin 1 2 3 4 Signal
+5V GND GND ON_HOOK Handset Connectors (JHSx) 4-pin JST PH series connector, 2.0mm pitch. Left Connector Pin 1 2 3 4 Signal MIC_IN+
PH_OUT PHONE_GND MIC_IN-
Auxiliary Power Connector (JPOx) 2-pin JST PH series connector, 2.0mm pitch. Pin 1 2 Signal
+12V GND Keyboard and PS/2 Mouse Connector (JKMx) 4P*2(W/O-Pin8) 2.54mm 180D(M) Pin Header Signal KDAT GND MDAT NC Pin 1 3 5 7 Pin Signal 2 4 6 X KCLK
+5V MCLK Null Power and Hard Disk Activity LED Connectors (JLEDPx - power, JLEDHx - hard disk) 2x2 pin header with 2.54mm pitch Pin 1 2 3 4 Signal PWR-
PWR+
HDD-
HDD+
www.jaotech.com Commercial in Confidence 33 UM.ZV.1012.01 Zivo Smart TerminalTM Touch Panel Connector (JTPx) Mini Base/Dip 90D 5-pin 1-side Pin 1 2 3 4 5 Signal UL UR Probe LR LL Signal Signal Description UR, UL PROBE LR, LL 5-wire touch panel signal of upper right/left side 5-wire touch panel signal of centre 5-wire touch panel signal of bottom right/left side System Fan and CPU Fan Connectors (JFANx) 3 x 1 wafer, 2.54mm pitch Pin 1 2 3 Signal GND
+12V TAC Line In Connector (JLINx) 4-pin JST PH series connector, 2.0mm pitch Pin 1 2 3 4 Signal LINE_IN R AUD_GND AUD_GND LINE_IN L Buzzer Connector (JBZx) 2-pin JST PH series connector, 2.0mm pitch Pin 1 2 Signal BUZZER-
BUZZER+
I2C/SMBus based Slave Device Connector from the Southbridge (JSMx) 6-pin JST PH series connector, 2.0mm pitch Pin 1 2 3 4 5 6 Signal SDA (I2C Data) SCL (I2C Clock) ATTN 5V 3.3V GND www.jaotech.com Commercial in Confidence 34 UM.ZV.1012.01 Zivo Smart TerminalTM 1 PCI Express Mini Card Slot (JPCIEx) Internal Microphones Connector (JMIC2_L & JMIC2_R) 2-pin JST PH series connector, 2.0mm pitch. Left Channel Signal Pin MIC2_L 1 2 AGND Right Channel Pin Signal MIC2_R 1 2 AGND Internal Stereo Speaker Connectors (JSPK1_L & JSPK1_R) 2-pin JST PH series connector, 2.0mm pitch. Left Channel Pin 1 2 Signal SPK_OUT_L-
SPK_OUT_L+
Right Channel Pin Signal 1 2 SPK_OUT_R-
SPK_OUT_R+
Headphone and Microphone Connectors (JHPx & JEMIC2_R) 3.5mm audio jacks with jack-sensing capability. Connector Function Jack Color JHP1 JHP2 JEMIC2_R Headphone Output Headphone Output Microphone Input Green Green Pink SPDIF Connector (JSPDIFx) 2-pin JST PH series connector, 2.0mm pitch. Pin 1 2 Signal SPDIF DGND www.jaotech.com Commercial in Confidence 35 UM.ZV.1012.01 Zivo Smart TerminalTM APPENDIX C Hardware installation This appendix describes hardware installation. Sections include:
Overview of Hardware installation and upgrading Disassembling the Smart TerminalTM Installing the 2.5" Hard Disk Drive (HDD) Installing the Central Processing Unit (CPU) C.1 Overview of Hardware installation and upgrading The Zivo Smart TerminalTM consists of an embedded computer that is housed in a plastic rear panel and a metal shielding case. The HDD, DDR2 RAM and similar components are all readily accessible by removing the covers on the rear plastic panel. Any maintenance or hardware upgrades can be easily completed after removing the rear covers at the back to the terminal. Note: The colour LCD display installed in the Zivo Smart TerminalTM is may contain a few defective pixels which do not always illuminate. With current LCD technology, it is almost impossible to guarantee zero defective pixels. Warning: Do not remove the plastic rear covers until you have verified that no power is flowing through the Smart TerminalTM. Power must be switched off and the power cord must be unplugged. C.2 Disassembling the Zivo Smart TerminalTM The following is the standard procedure for disassembling the Zivo Smart TerminalTM to upgrade your system. All procedures are illustrated in Figure C.1. Figure C.1: Disassembling the plastic rear cover of the Zivo Unscrew the screws that secure the plastic rear covers, and then remove the covers www.jaotech.com Commercial in Confidence 36 UM.ZV.1012.01 Zivo Smart TerminalTM C.3 Installing the 2.5" Hard Disk Drive (HDD) You can attach one SATA Hard Disk Drive to the Zivo Smart TerminalTM. The following are instructions for installation:
1. Detach the HDD bracket by unscrewing the 2 M3 screws on the top of the HDD bracket. 2. Place the HDD inside the HDD bracket and tighten 4 screws from both sides of the HDD bracket. 3. Slide the HDD and bracket into the on-board Sata Connector (JSATA1). 4. Fix the HDD and bracket to the board with the 2 M3 screws. 2.5 HDD and Bracket Figure C.2: Installing the primary 2.5" HDD C.4 Installing the Central Processing Unit (CPU) The Zivo Smart Terminals central processing unit (CPU) cannot be upgraded. Warning: The CPU may be damaged if operated without a heatsink. Caution: Always disconnect the power cord from the terminal before maintenance or upgrade work. Do not connect while the power is on as sensitive electronic components can be damaged by a power surge. Only experienced electronics personnel should work on the Smart TerminalTM. www.jaotech.com Commercial in Confidence 37 UM.ZV.1012.01 Zivo Smart TerminalTM APPENDIX D VESA mounting This appendix describes VESA mounting. The Zivo Smart TerminalTM also provides standard VESA mounting to help system integrators conveniently integrate the terminal into their system. It is recommended that customers use mounting brackets provided by JAOtech to ensure safe and reliable fixing. VESA mount installation should be carried out by a professional technician. Please contact the service technician or your JAOtech reseller if you require this service. Follow the instructions below to mount the Zivo Smart TerminalTM to the JAOtech wall bracket:
1. The Zivo wall bracket is comprised of two parts: one back bracket, and one mounting bracket. (See Figure D.1) 2. First attach the back bracket to the VESA mount at the back of the Zivo, securing it in place with the four M6 Phillips-head screws provided. 3. Attach the mounting bracket to the wall or another flat surface. The back bracket slides vertically from the top into the mounting bracket. It can be secured to the mounting bracket by screwing the four M3 Phillips-head screws provided through the corresponding holes at the tops of the mounting bracket. Warning: To avoid injury be sure to secure the screws of the wall bracket tightly. Figure D.1: JAOtech wall bracket www.jaotech.com Commercial in Confidence 38 UM.ZV.1012.01 Zivo Smart TerminalTM Figure D.2: VESA mounting dimension diagram (75 x 75 mm) www.jaotech.com Commercial in Confidence 39 UM.ZV.1012.01 Zivo Smart TerminalTM APPENDIX E DESK STAND This appendix describes ARCOS5100 Desk Stand. The Zivo Smart TerminalTM can also be provided with a Desk Stand to help system integrators conveniently integrate the terminal into their system. It is recommended that customers use Desk Stands provided by JAOtech for desk top mounting to ensure safe and reliable use of the terminal. E.1 Installing the Smart Terminal to the Desk Stand Desk Stand installation should be carried out by a professional technician. Please contact the service technician or your JAOtech reseller if you require this service. Follow the instructions below to mount the Zivo Smart TerminalTM to the ARCOS 5100 Desk Stand:
1. Remove the hinge cover from Stand Arm by unscrewing the 2 M3 screws. 2. Tread the power cable through Stand Arm from the bottom of Foot. 3. Fix the terminal to the VESA plate with four M6x10 VESA Screws. 4. Plug the power cable and all other cables necessary into the terminal 5. Fix the hinge cover to Stand Arm with the 2 M3 screws. E.2 Safety Instructions 1. The Acros 5100 Desk Stand is especially designed to support and position the JAOtech Smart Terminal range only. 2. Before beginning to assemble / disassemble the terminal, be sure the terminal is turned off and all cables are disconnected. 3. The Arcos 5100 Desk Stand should only be used on stable, horizontal, flat surfaces that exceed the surface area of the Desk Stand Foot in every direction. www.jaotech.com Commercial in Confidence 40 UM.ZV.1012.01 Zivo Smart TerminalTM Warning: To avoid injury be sure to secure all screws of the Desk Stand tightly. Figure E.1: ARCOS 5100 Desk Stand www.jaotech.com Commercial in Confidence 41 UM.ZV.1012.01 Zivo Smart TerminalTM Figure E.2: ARCOS 5100 Main Dimensions www.jaotech.com Commercial in Confidence 42 UM.ZV.1012.01 Zivo Smart TerminalTM Further information If you require any more information regarding this product or any others in the JAOtech range then please visit our website at www.jaotech.com, email us at sales@jaotech.com, or contact our UK head office using the numbers below:
Tel: +44 (0) 1737 781060 Fax: +44 (0) 1737 789734 JAOtech is registered in England and has sites at the following locations:
JAOtech UK (Head Office) Perrywood Business Park Honeycrock Lane Redhill Surrey RH1 5DZ JAOtech Taiwan 5th Floor, No.59, Lane 77 Xing-ai Rd. Neihu Dist., Taipei City 11494 Taiwan JAOtech USA 126 Monroe Turnpike Trumbull, Connecticut USA 06611 JAOtech Europe De Trompet 1703 1967 DB Heemskerk The Netherlands Authorised reseller stamp below:
www.jaotech.com Commercial in Confidence 43 UM.ZV.1012.01
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-07-05 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-07-05
|
||||
1 | Applicant's complete, legal business name |
Barco N.V.
|
||||
1 | FCC Registration Number (FRN) |
0027154087
|
||||
1 | Physical Address |
President Kennedypark 35, Kortrijk 8500, Belgium
|
||||
1 |
Kortrijk, N/A 8500
|
|||||
1 |
Belgium
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
SXE
|
||||
1 | Equipment Product Code |
J150A01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
E******** C********
|
||||
1 | Title |
RD Manager Hardware
|
||||
1 | Telephone Number |
+32-5********
|
||||
1 | Fax Number |
+32-5********
|
||||
1 |
e******@barco.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Panel PC | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
I**** C****
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
i******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC