all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 3.31 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) |
1 2 | Users Manual | Users Manual | 3.31 MiB |
wePresent User's Manual For WiPG-2000S (May 2015) Version: 0.1 1 Table of Contents OVERVIEW ............................................................................................................................... 5 PACKAGE CONTENTS ................................................................................................................... 8 USB TOKEN CONTENTS............................................................................................................... 8 PHYSICAL DETAILS ...................................................................................................................... 9 WHAT YOU MIGHT NEED .......................................................................................................... 10 QUICK INSTALLATION ................................................................................................................ 11 WIPG-2000S START/STANDBY PAGE .......................................................................................... 12 QUICK GUIDE .......................................................................................................................... 12 WHITEBOARD ......................................................................................................................... 12 USB PLAYER FUNCTION............................................................................................................. 13 CONFERENCE CONTROL MODE ................................................................................................... 14 SENDER LIST ........................................................................................................................... 14 SPLIT SCREEN MODE ................................................................................................................. 14 SETUP ................................................................................................................................... 15 REMOTE TOUCH CONTROL (UMT).............................................................................................. 15 PEN MENU FUNCTION UNDER PROJECTING MODE. ....................................................................... 15 WEPRESENT FOR WINDOWS ...................................................................................................... 18 INSTALL THE APPLICATION .......................................................................................................... 18 START THE APPLICATION ............................................................................................................ 20 RECENT CONNECTION ............................................................................................................... 20 CONNECT TO RECEIVER DEVICE ................................................................................................... 21 LOGIN.................................................................................................................................... 22 CHANGE TO ANOTHER WIFI NETWORK ........................................................................................ 22 MAIN USER INTERFACE ............................................................................................................. 23 SCREEN PROJECTION ................................................................................................................ 23 CONNECTED RECEIVER LIST ........................................................................................................ 24 VIDEO STREAMING ................................................................................................................... 24 MENU ................................................................................................................................... 26 1 2 3 4 5 6 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.11.1 OPEN WEB ADMIN .................................................................................................................. 26 8.11.2 SHOW RECEIVER INFORMATION .................................................................................................. 26 8.11.3 LAUNCH SIDEPAD .................................................................................................................... 26 8.11.4 LAUNCH WEBSLIDES ................................................................................................................ 28 8.11.5 ENABLE UOIP ......................................................................................................................... 30 8.11.6 REMOTE CONTROL ................................................................................................................... 30 8.11.7 PROJECTION SOURCE ................................................................................................................ 30 8.11.8 ADVANCED PROJECTION OPTION ................................................................................................ 31 8.11.8.1 ADVANCED SCREEN CAPTURE ..................................................................................................... 31 2 8.11.8.2 PROJECTION ASPECT RATIO ........................................................................................................ 32 8.11.8.3 SELECT PROJECTION MODE ........................................................................................................ 33 8.11.8.4 RESOLUTION SETTINGS ............................................................................................................. 33 8.11.8.5 PROJECTION QUALITY ............................................................................................................... 33 8.11.8.6 SCREEN ENCODING FORMAT ...................................................................................................... 34 8.11.9 OTHERS ................................................................................................................................. 34 8.11.9.1 AUTO POWER MANAGER .......................................................................................................... 34 8.11.9.2 MAKE USB PNS TOKEN ............................................................................................................ 35 8.11.9.3 COPY APPLICATION TO DESKTOP .................................................................................................. 35 8.11.9.4 HOT KEY ................................................................................................................................ 36 8.11.10 DISCONNECT ........................................................................................................................... 36 8.11.11 ABOUT .................................................................................................................................. 36 8.11.12 EXIT. .................................................................................................................................... 36 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 WEPRESENT FOR MAC .............................................................................................................. 37 INSTALL THE APPLICATION .......................................................................................................... 37 START THE APPLICATION ............................................................................................................ 38 RECENT CONNECTION ............................................................................................................... 38 LOGIN.................................................................................................................................... 40 CHANGE TO ANOTHER WIFI NETWORK ........................................................................................ 40 MAIN USER INTERFACE ............................................................................................................. 41 SCREEN PROJECTION ................................................................................................................ 41 CONNECTED RECEIVER LIST ........................................................................................................ 42 VIDEO STREAMING ................................................................................................................... 42 9.10 MENU ................................................................................................................................... 43 9.10.1 WEB ADMIN ........................................................................................................................... 43 9.10.2 SHOW RECEIVER INFORMATION .................................................................................................. 44 9.10.3 LAUNCH SIDEPAD .................................................................................................................... 44 9.10.4 LAUNCH WEBSLIDES ................................................................................................................ 45 9.10.5 REMOTE DESKTOP.................................................................................................................... 47 9.10.6 SELECT PROJECTION DESKTOP .................................................................................................... 47 9.10.7 ADVANCED SETTINGS ................................................................................................................ 47 9.10.7.1 PROJECTION ASPECT RATIO ........................................................................................................ 47 9.10.7.2 SELECT PROJECTION MODE ........................................................................................................ 48 9.10.7.3 RESOLUTION SETTINGS ............................................................................................................. 48 9.10.7.4 PROJECTION QUALITY ............................................................................................................... 48 9.10.7.5 SCREEN ENCODING FORMAT ...................................................................................................... 49 9.10.8 OTHERS ................................................................................................................................. 49 9.10.8.1 MAKE USB PNS TOKEN ............................................................................................................ 49 9.10.8.2 HOT KEY ................................................................................................................................ 50 3 9.10.9 DISCONNECT ........................................................................................................................... 50 9.10.10 ABOUT .................................................................................................................................. 50 9.10.11 EXIT. .................................................................................................................................... 50 10 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 10.10 10.11 10.12 10.13 10.14 10.15 10.16 11 11.1 11.2 11.3 11.4 11.5 12 13 WEB MANAGEMENT ................................................................................................................ 51 HOME PAGE ........................................................................................................................... 51 CONFERENCE CONTROL ............................................................................................................. 51 ADMIN .................................................................................................................................. 53 SYSTEM STATUS ....................................................................................................................... 53 DEVICE SETUP ......................................................................................................................... 54 NETWORK SETUP ..................................................................................................................... 55 WIFI SETUP ............................................................................................................................ 57 SNMP SETUP ......................................................................................................................... 59 OSD SETUP ............................................................................................................................ 60 WEBSLIDES SETUP ................................................................................................................... 61 CHANGE PASSWORDS ............................................................................................................... 62 RESET TO DEFAULT ................................................................................................................... 63 FIRMWARE UPGRADE ............................................................................................................... 63 REBOOT SYSTEM ...................................................................................................................... 64 LOGOUT ................................................................................................................................. 65 WEBSLIDES ............................................................................................................................ 66 USB PLAYER ........................................................................................................................... 67 PHOTO VIEWER ....................................................................................................................... 68 VIDEO PLAYER ......................................................................................................................... 68 MUSIC PLAYER ........................................................................................................................ 69 OFFICE VIEWER ....................................................................................................................... 70 SETUP ................................................................................................................................... 71 WALL MOUNT ........................................................................................................................ 72 SAFETY .................................................................................................................................. 73 4 1 Overview WiPG-2000S is a spectacular wireless presentation device which connects multi-platform devices (Windows/Mac/Pad/Smartphone) for engaging interactive presentations by supporting finger-touch technology, virtual whiteboard and Win 7/8 HID compatible remote devices. WiPG-2000S Highlight Features:
Icon Feature Description wePresent for Windows Wireless presentation for Windows and Mac and Mac Win: XP/Vista/7/8, Mac: 10.7/10.8/10.9/10.10 MirrorOp for Galaxy MirrorOp sender for Samsung Galaxy series devices Support. Users can project any contents from their Samsung Galaxy devices. MirrorOp Presenter High quality presentation and annotation via iPhone/iPad or Android devices (Word, Excel, PPT, PDF , Photo , Browser, Live Camera, Screenshot) Video Streaming Network Video/Music streaming for Windows, Mac, iOS and Android. SidePad Control the projecting screen on PC or Mac via iPhone/iPad or Android devices WebSlides Broadcast slides to your devices with WiFi and web browser Audience can save the projecting slides for taking notes Webslides can be secured by password. Whiteboard Make free drawing on virtual whiteboard/blackboard without any computer connected Make annotation on any projecting content. It allows you to annotate on the screen during the presentation 5 Annotating, writing and drawing can be done using touch screen or any other USB HID device 4-to-1 projection Project four PC/Mac screens or WiFi-Doc content to one projector/display at once. One to Many Projection Project the screen to up to four receiver devices at the same time. Conference Control /
Control projection from WiPG's web page, or use OSD User-List mouse/keyboard to select a PC from the standby screen. Conference control function can be secured by password Moderator can control who is projecting. Moderator can compare 4 screens side by side. SNMP V3 Manage WiPG devices across the corporate network through enhanced SNMP V3 protocol UMT Driverless remote touch control through network.
(Support standard Win 7/8 compatible USB HID touch device) Key Features WiFi 802.1a/b/g/n (Selective 5G/2.4G WiFi) Power over Ethernet High performance screen/audio projection for Windows/Mac (Windows 7/8 and Mac 10.7/10.8/10.9/10.10) Remote desktop control from Touch Screen or Mouse/Keyboard for Windows/Mac Plug&Show: launching the projection application from a USB Token without installation. Extra USB tokens with the PlugandShow function can be easily created in the wePresent software. High performance 4-to-1 Quadrant Screen Projection Support up to 64 concurrent login users Conference Control: Mediator function through the device web page or standby screen Support Wireless Multi-touch control (Win7/8 standard HID compatible device) Support drawing feature for projecting sender screen, or drawing on 6 whiteboard without PC Changeable Customized standby screen.
-
-
-
-
Replace entire start screen with background image. SNMP V3:
manage/configure multiple WiPGs through SNMP V3 protocol Firmware upgrade via FTP Enhance the remote SNMP manageability to higher security level Wi-Fi Enterprise encryption support Support MSI installer for Windows software deployment and execute application from command line Extended desktop support for both Windows and Mac Security design: Session Login Code, WEP/WPA/WPA-Enterprise WiFi Security, and GateKeeper HDMI and VGA dual video interfaces WiFi AP, Station and AP-Client mode: Make WiPG-2000S a part of your wired or wireless network. Allowing internet access to all connected users and presentation from network computers. 7 2 Package Contents wePresent WiPG-2000S Box wePresent WiPG-2000S USB Token Power Adapter (DC +5V, 2.6A) 2 WiFi Antenna Quick Installation Guide Wall Mount Kit Warranty Card CE DoC 3 USB Token Contents Windows Installer (WiPG-2000S Windows Installer) MAC Installer (WiPG-2000S Mac Installer) VAC Driver (For Windows XP Audio Projection) VDD Driver (For Windows XP/Vista Virtual Extended Screen) User Manual wePresent WiPG Execution File SVS Driver (For Mac Extended Screen) 8 4 Physical Details Front Panel Description Power Button and LED Power on/off button. USB Port (Front) 2 USB ports for USB mouse and keyboard LED Indicator: System Loading(Red), Ready(Blue) Rear Panel Antenna Description WiFi Antenna USB Port (Rear) USB port for USB Thumb drive or Touch Device RJ-45 VGA Connector HDMI Audio Jack Power Jack 10/100/1000M RJ-45 port PoE (Power Over Ethernet) VGA connector HDMI Connector Audio Jack (3.5mm) Power Jack (5V/2.5A) 9 The USB port can support up to 5V/0.5A touch device and USB drive. PoE Standard: IEEE 802.3at Standard 13 watts type 1 (class 0) powered device(PD) of Power Over Ethernet(PoE). Bottom Side Screw Hole Reset Button Description Screw Hole for Wall Mount Kit Press reset button and power on the device to execute Hardware Reset. 5 What You Might Need Projector/display with VGA/HDMI interface Windows or Mac PC/Laptop Apple iPhone or iPad device Android Phone or Tablet device Speaker (Optional, for audio projection feature) USB Mouse and Keyboard (Optional, for remote desktop feature) USB HID Touch Screen/IWB Device (Optional, for UMT feature) 10 6 Quick Installation 1) Connect wePresent WiPG-2000S device to Projector/display through VGA/HDMI port and turn on projector/display power. 2) Connect the power adaptor to WiPG-2000S device and press the power button to turn on WiPG-2000S device. System will be ready when the LED light turns to blue. WiPG-2000S can also be powered by Ethernet Cable (Power over Ethernet). It will show the default standby screen as below when system is ready. 3) Insert the speaker cable to WiPG-2000S audio jack for audio output 4) Insert the USB mouse or keyboard or USB touch device to WiPG-2000S front/rear USB port for On-Screen Display (OSD) control. (Optional) 11 7 WiPG-2000S Start/Standby Page 7.1 Quick Guide The device will show the quick guide on the screen as below, it will show the device information on the screen and also the function icon. 7.2 Whiteboard 1) Click on the whiteboard button on the start page to enter whiteboard function page. You can make the free drawing on device screen through Mouse, Touch Screen or IWB device. 12 2) Pen Menu Function Button Description Open/Minimize all Pen menu bar. Home, Go back to wePresent home standby screen. Clear all of the drawing/writing on the screen. Erase part of drawing/writing. Select the pen color. (Red, Green, Blue) Select the size of the pen. (Small, Medium, Big) Click to use the blackboard. (All the drawing/writing will be cleared when changes to different mode) Click to use the whiteboard. (All the drawing/writing will be cleared when changes to different mode) 7.3 USB Player function 1) Click on the USB Player button on the start page to enter USB Player function. You can playback the Photo/Music/Video/Office files from the attached USB drive. Details please see the USB Player section. 13 7.4 Conference Control Mode 1) Click to enable conference control mode and the sender will be blocked when they try to overtake the screen from the sender application. The moderator can only manage the projecting sender through web conference control page or the OSD PC-List. 2) Click to disable conference control mode, the sender can overtake the screen freely by pressing the button on the sender application 7.5 Sender List Click on the Sender-List button to show all connected sender list, you can also pick the sender name to display the screen/content from that sender. 7.6 Split Screen mode 1) Click on the Split Screen button on the start page to enter Split Screen page. You can see the connected sender list and press the add icon to choose them to the selected quadrant area. 14 7.7 Setup Click on Setup icon
, you can find the Firmware (FW) version, resolution, WiFi channel and AP-client status information on the screen. Meanwhile, you can also click on the Calibration function to calibrate the projecting screen to an optimization mode. 7.8 Remote Touch Control (UMT) WiPG-2000S can support standard Win7/8 compatible HID touch device. By connecting the HID touch screen/IWB device, users can control the standby screen, whiteboard and the projecting screen remotely from the Touch Screen/IWB device. Note:
1. The UMT can only support standard USB HID touch device, the supported touch device can be found from wePresent distributor. 2. It will process the touch event and send the mouse event to sender when the sender is Windows XP, 7 and Mac. 3. The USB port on WiPG-2000S can supply up to 5V/0.5A power, the additional power supply is required if the attached HID device required more power. 7.9 Pen Menu Function under Projecting Mode. 1) When users are projecting through Windows, Mac, Android and iOS application, any Win7/8 standard HID compatible device (i.e Mouse/IWB/Touch Screen) can be used for Pen feature. Users can do free drawings/writings and annotation on the projecting screen. 15 Item Description Home, Go back to wePresent home standby screen. Enable/Disable the conference control mode. The tool for PowerPoint presentation. PageUp/PageDn, this button to go to previous/next page. SlideShow, When the user is projecting a PPT file, press this button to enable Slide Show function. ESC, When the user is projecting a PPT file, press this button to quit Slide Show mode. Clear all of the drawing/writing on the screen. Erase part of drawing/writing. Save current screen image to USB driver. Enable the magnifier function. Change to Mouse mode for remote control function. Select the color and size for Pen mode. (Red, Green, Blue) Select the size of the pen. (Small, Medium, Big) 16 Change to Pen mode for drawing/writing function. Change to Pointer Mode. 17 8 wePresent for Windows
(Do Not Support Windows Phone, Windows RT) 8.1 Install the application 1) Make sure your PC WiFi is enabled already, and connect your PC to wePresent WiPG-2000S box through WiFi. You can find the WiFi name of your WiPG box information on the start/standby page. 2) Launch your browser and enter the Device Host Name (SSID) or IP address in the browser. You can find the IP address and Host Name (SSID) on the projector/display screen. (Default Host Name (SSID) is WiPG-2000S-xxx, Default IP is 192.168.100.10) 3) Download the wePresent software for XP/Vista/Windows 7 / 8 and install on your PC. (Ps. You can also launch the application from USB token directly.) s 18 4) When the download is completed, follow the wePresent WiPG Setup wizard to execute the software.
(Make sure your WiFi have connected to WiPG-2000S-xxx and your PCs personal firewall allows wePresent WiPG-2000S software to pass through.) 19 8.2 Start the application 1) Click wePresent WiPG-2000S icon on desktop to execute the application, or launch the application from USB token directly. (You can find the wePresent WiPG-2000S.exe under wePresent WiPG folder). 2) It will start to search wePresent WiPG-2000S receiver automatically. 8.3 Recent Connection 1) WiPG-2000S will memorize the successful connection profiles and open the recent connect dialog, you can select one of the profile and press the Connect button to connect this WiPG-2000S directly. 2) Click import to import the device profile. (The device profile can be downloaded from receiver web page) 20 3) Chick manual to enter the receiver IP address manually, or click remove to remove the profile from the list. 4) If you want to connect to another WiPG-2000S receiver, please press the Rescan button. 8.4 Connect to Receiver Device 1) WiPG-2000S application will search and list the WiPG-2000S receiver Device. You can select the target receiver device and press Connect button to connect the selected receiver device. 2) You can press the Refresh button to search again. 3) If you cant find the target receiver device from the list, you can press the Manual button to enter the receiver IP address manually and connect. 4) If you want to change to another WiFi network, you can press the WiFi button to list the available WiFi network. 21 8.5 Login 1) When connecting to a Code protection enabled WiPG-2000S receiver, you have to enter the Code and press the Connect button to login the receiver.
(You can find the CODE from the OSD standby screen or right-upper corner of start screen)
(Enter the code into the circled area) 2) If you want to connect to another receiver or cancel the login, please press the Cancel button. 8.6 Change to another WiFi Network 1) If you press the WiFi icon, WiPG-2000S application will search the available WiFi Network and list the WiPG-2000S WiFi Device. You can select a network and press the Connect button to connect the selected WiFi Device. 2) You can press the Refresh button to search again or press the All button to list all available WiFi Network name. 3) If you dont like to change the WiFi Network and want to keep the connection to current network, you can press the Cancel button. 22 8.7 Main User Interface Menu Area Presentation function tab Video function tab Connected Receiver list Area 8.8 Screen Projection Control Area for Screen Projection Feature 1) Click the Play button for full or 1,2,3,4 for split screen projection, you can project the main screen on to the display immediately. Click the Pause button, you can freeze you projection screen, and click the Stop button to stop projecting your screen. Button Description Button Description Presentation Function Tab Full Screen projection (Support audio projection) Project to Split #2 (No audio projection) Project to Split #4(No audio projection) Pause projecting Mute/Unmute for screen projection Video Function Tab Project to Split #1 (Support audio projection) Project to Split #3(No audio projection) Stop projecting Magnifier function Open/Hide Connected Receiver List 23 Note:
1. Audio Function:
For Windows XP system, if you cant hear the audio, please installs the Audio driver (VAC.exe, Virtual Audio Control Driver) on your computer first, you can find the software from USB Token.
(Windows Vista, Win7 and Win8 is not necessary to install VAC driver) 8.9 Connected Receiver list Press on the arrow button to expand the connected receiver list, and press the add button to add another receiver. During standby status, you can press the check button to select the multiple receivers (up to 4) to mirror your screen, and press radio button to select one of the receiver to send the audio. Button Description Add/Remove the receiver Select the receiver to project your screen and stream the video. (up to 4) Select the receiver to send audio
(One of them) 8.10 Video Streaming Click the Open File button to select the video/music files for the streaming. Click the Pause or Stop button, you can pause or stop the streaming, and click the Volume button to mute, adjust the volume level. 24 Button Description Play the video/Music Stop the Video/Music Open the Video/Music File Mute/Unmute Repeat On/Off Value Note:
Item Supported File Format MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4 / MWV9 / MOV /
Motion JPEG / MKV / ASF / DVR-M5 Supported Video Codec MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4* / WMV9** /
QuickTime / Motion JPEG
* Microsoft MPEG-4 v1-3 is not supported.
** Only WMV3/WVC1 is supported. Supported Audio Codec LPCM / AAC / MP3 / WMA
* All formats support up to 1920x1080, 30fps, and 20Mbps.
* These file formats might include video and audio codecs which are not supported.
* Please make sure your corporate firewall allow wePresent Video streaming pass through. (TCP Port 2869, 49152, 49153 and UDP 1900, 50000-650000) 25 8.11 Menu 1) Press Menu button from the main UI, you will find the menu to enable the additional feature or to change the application options. 8.11.1 Open Web Admin 1) Click on Open Web Admin, it will open the browser and link to the device administration page. 8.11.2 Show Receiver Information 2) Click on Show Receiver Information, it will ask the receiver device to show the connection information on the projecting screen. 8.11.3 Launch SidePad Introduction: SidePad is an application to allow the user to connect Pad/Smartphone (Android and iOS), PC, and display/projector via WiPG-2000S device. User can then control the projecting PC via Pad/Smartphone. Please refer to the below image for more information. 26 1) SidePad Control for Android/iOS device. Android: Download MirrorOp Receiver from Google Play Store. iOS: Download MirrorOp Receiver from Apple Store. Connect your Android device to WiPG-2000S device through WiFi and Launch MirrorOp Receiver. Click on Launch SidePad from the menu. In seconds, you shall see the PC desktop shown on the iOS/Android Device. Now you can control the projecting PC from your iOS/Android device. 2) If there is no Smartphone/Pad device detected after clicking on Launch SidePad the below image will show up. 27 8.11.4 Launch WebSlides 1) Introduction: Webslides is an application to allow the user/presenter to broadcast the projecting screen/slides to allow multiple login users to receive the slides during a presentation and save the slides for note taking later. 2) Presenter: Make sure your PC/Mac is connected to WiPG-2000S box and click on Launch Webslides, when the function is on, the item will be checked on the main menu. 3) Audience: Users need to connect to WiPG-2000S WiFi Network as the presenter and then launch their browser and enter WiPG-2000S IP address (The information can be found on the projecting screen) on the URL of browser. Once the users are connected, they will see the below image on their devices. Click on Websildes button. See below:
28 4) Start to receive the presenters slides (Auto refresh every 30 sec). The below image can be seen on the audiences browser. Users can put the mouse/finger on each button to get the tip window for the function of each button. Note:
The WiPG-2000S logged-in user is not identical to WebSlides user, and they both consume the wireless bandwidth for device connection. If there are more than 10 users logged into WiPG-2000S, it is recommended to connect WiPG-2000S to company network through Ethernet or bridge WiPG-2000S to a router due to wireless bandwidth concern. User should connect WiPG-2000S via company network or router 29 in order to secure the projection performance. The WebSlides user number should not exceed the recommended number on the web management page to prevent the connection failure or low projection performance. PS. Wireless Projection function and Conference Control function can support up to 64 users. 8.11.5 Enable UoIP 1) Click on Enable UoIP, it will try to attach the USB touch device which is attached to wePresnent device to senders Windows PC. The UoIP Driver for Windows can be found from wePresent USB Token. 8.11.6 Remote Control 1) Click on Remote Control, you can allow or block the remote mouse/keyboard/touch control from WiPG-2000S receiver. 8.11.7 Projection Source 1) Click on Select Projection Desktop, you can select to project the main screen or the extended screen. Note:
1. For Windows XP system, you need to install VDD.exe driver first, you can find it from USB token. For Windows 7/Vista Starter edition, it cant support extended screen. For some Win7/Win8 laptop/tablet, the extended screen feature is not supported if the display card cant support the extended screen function. This typically can be verified by checking whether it can enable the extended screen through physical VGA cable, if yes, then it should work with wePresent software. 30 2. 3. 8.11.8 Advanced Projection Option 8.11.8.1 Advanced Screen Capture 1) Click on Advanced Screen Capture, you will be able to see tip windows and other layered windows (include the main UI) on the connected display. However, the mouse cursor may blink from time to time when you are projecting your PC screen!
31 Disable Advanced Screen Capture. Tip window is not shown in projection screen. Enable Advanced Screen Capture. Tip window is shown in projection screen. 8.11.8.2 Projection Aspect Ratio 1) Click on Projection Aspect Ratio, choose Keep aspect ratio to keep the original aspect ratio if the desktop resolution is different from WiPG-2000S output resolution, or choose Fit full screen to project the screen to full screen. 32 8.11.8.3 Select Projection Mode 1) Click on Select Projection Mode, choose the Presentation mode for shortest latency or the Video mode for auto-latency control to have better video performance. 8.11.8.4 Resolution Settings 1) Click on Resolution Setting, choose Never Change to keep original desktop resolution, Always Change to change resolution automatically according to applications recommendation, or Always ask me to prompt a resolution change message to user. 8.11.8.5 Projection Quality 1) Click on Projection Quality, choose Normal for faster projection speed with lower screen image quality, and Best for clear screen image quality but slower projection speed. 33 8.11.8.6 Screen Encoding Format 1) Click on Screen Encoding Format, choose JPG for better image quality but bigger network bandwidth required, and H264 for smaller data size with reasonable image quality, and Auto that the application will select the encoding type automatically according to the receivers and senders setting and status. 8.11.9 Others 8.11.9.1 Auto Power Manager 1) To make the highest projection performance, application will turn the PCs windows power scheme from current settings to highest performance, however, you can click on Auto Power Manage to enable or disable this function and restore you power scheme immediately. 34 8.11.9.2 Make USB PnS Token 1) Click Make USB PnS Token to make a USB wePresent WiPG-2000S Token, you can insert a USB and follows the wizard to make the Token. After completion, you can plug the USB to any PC to do the projection without installing the wePresent WiPG software onto every PC. 8.11.9.3 Copy Application to desktop 1) Click on Copy Application to desktop, it will copy the application to your desktop immediately. 35 8.11.9.4 Hot Key 1) Click on Hot Key to display the available Hot Key definition. 8.11.10 Disconnect 1) Click on Disconnect to disconnect from current connected receivers. 8.11.11 About 1) Click on About to show system information. It includes product model name, Application version. 8.11.12 Exit 1) Click on Exit to exit this application. It will stop current playing status and shut down the application immediately. 36 9 wePresent for Mac 9.1 Install the application 1) Make sure your PC WiFi is enabled and connect your PC to wePresent WiPG-2000S box through WiFi. 2) Launch your browser and enter the IP address on browser. You can find the IP address and Host Name (SSID) on the projector/display screen. (Default IP is 192.168.100.10) 3) Download the wePresent software for Mac and install on your PC. 4) When the download is completed, follow the wePresent WiPG Setup wizard to execute the software. 37 9.2 Start the application 1) Click on wePresent WiPG-2000S icon from Application folder to execute the application. 2) It will start to search wePresent WiPG-2000S receiver automatically. 9.3 Recent Connection 1) WiPG-2000S will memorize the successful connection profiles and open the recent connect dialog, you can select one of the profile and press the Connect button to connect this WiPG-2000S directly. 2) Click import to import the device profile. (The device profile can be downloaded from receiver web page) 38 3) Chick manual to enter the receiver IP address manually, or click remove to remove the profile from the list. 4) If you want to connect to another WiPG-2000S receiver, please press the Rescan button. 5) WiPG-2000S application will search and list the WiPG-2000S receiver Device. You can select the target receiver device and press Connect button to connect the selected receiver device. 6) You can press the Refresh button to search again. 7) If you cant find the target receiver device from the list, you can press the Manual button to enter the receiver IP address manually and connect. 8) If you want to change to another WiFi network, you can press the WiFi button to list the available WiFi network. 39 9.4 Login 1) When connecting to a Code protection enabled WiPG-2000S receiver, you have to enter the Code and press the Connect button to login the receiver.
(You can find the CODE from the OSD standby screen or right-upper corner of start screen) 2) If you want to connect to another receiver or cancel the login, please press the Cancel button. 9.5 Change to another WiFi Network 1) If you press the WiFi icon, WiPG-2000S application will search the available WiFi Network and list the WiPG-2000S WiFi Device. You can select a network and press the Connect button to connect the selected WiFi Device. 2) You can press the Refresh button to search again or press the All button to list all available WiFi Network name. 3) If you dont like to change the WiFi Network and want to keep the connection to current network, you can press the Cancel button. 40 9.6 Main User Interface Menu Area Presentation function Video function tab Connected Receiver list Area 9.7 Screen Projection Control Area for Screen Projection Feature 1) Click the Play button for full or 1,2,3,4 for split screen projection, you can project the main screen on to the display immediately. Click the Pause button, you can freeze you projection screen, and click the Stop button to stop projecting your screen. Button Description Button Description Presentation Function Tab Video Function Tab Full Screen projection (Support audio projection) Project to Split #2 (No audio projection) Project to Split #4(No audio projection) Pause projecting Mute/Unmute for screen projection Project to Split #1 (Support audio projection) Project to Split #3(No audio projection) Stop projecting Magnifier function Open/Hide Connected Receiver List Note: For audio feature, please install the SoundFlower on your computer first, you can find the software from USB Token. 41 9.8 Connected Receiver list Press on the arrow button to expand the connected receiver list, and press the add button to add another receiver. During standby status, you can press the check button to select the multiple receivers (up to 4) to mirror your screen, and press radio button to select one of the receiver to send the audio. Button Description Add another receiver. Select the receiver to project your screen and stream the video. (up to 4) Select the receiver to send audio.
(One of them) 9.9 Video Streaming Click the Open File button to select the video/music files for the streaming. Click the Pause or Stop button, you can pause or stop the streaming, and click the Volume button to mute, adjust the volume level. Button Description Play the video/Music. Stop the Video/Music. Open the Video/Music File. 42 Mute/Unmute Repeat On/Off Value Note:
Item Supported File Format MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4 / MWV9 /
Supported Video Codec MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4* /
MOV / Motion JPEG / MKV / ASF / DVR-M5 WMV9** / QuickTime / Motion JPEG
* Microsoft MPEG-4 v1-3 is not supported.
** Only WMV3/WVC1 is supported. Supported Audio Codec LPCM / AAC / MP3 / WMA
* All formats support up to 1920x1080, 30fps, and 20Mbps.
* These file formats might include video and audio codecs which are not supported. 9.10 Menu 1) Press Menu button from the main UI, you will find the menu to enable the additional feature or to change the application options. 9.10.1 Web Admin 1) Click on Web Admin, it will open the browser and link to the device administration page. 43 9.10.2 Show Receiver Information 1) Click on Show Receiver Information, it will ask the receiver device to show the connection information on the projecting screen. 9.10.3 Launch SidePad 1) Introduction: SidePad is an application to allow the user to connect Pad/Smartphone (Android and iOS), PC, and display/projector via WiPG-2000S device. User can then control the projecting PC via Pad/Smartphone. Please refer to the below image for more information. 2) SidePad Control for Android/iOS device. Android: Download MirrorOp Receiver from Google Play Store iOS: Download MirrorOp Receiver from Apple Store. Connect your Android device to WiPG-2000S device through WiFi and Launch MirrorOp Receiver Click on Launch SidePad from the menu. In seconds, you shall see the PC desktop shown on the iOS/Andriod Device. Now you can control the projecting PC from your iOS/Android device. 44 3) If there is no Smartphone/Pad device detected after clicking on Launch SidePad the below image will show up. 9.10.4 Launch WebSlides 1) Introduction: Webslides is an application to allow the user/presenter to broadcast the projecting screen/slides to allow multiple login users to receive the slides during a presentation and save the slides for note taking later. 2) Presenter: Make sure your PC/Mac is connected to WiPG-2000S box and click on Launch Webslides, when the function is on, the item will be checked on the main menu. 3) Audience: Users need to connect to WiPG-2000S WiFi Network as the presenter and then launch their browser and enter WiPG-2000S IP address (The information can be found on the projecting screen) on the URL of browser. Once the users are connected, they will see the below image on their devices. Click on Websildes button. See below:
45 4) Start to receive the presenters slides (Auto refresh every 30 sec). The below image can be seen on the audiences browser. Users can put the mouse/finger on each button to get the tip window for the function of each button. Note:
The WiPG-2000S logged-in user is not identical to WebSlides user, and they both consume the wireless bandwidth for device connection. If there are more than 10 users logged into WiPG-2000S, it is recommended to connect WiPG-2000S to company network through Ethernet or bridge WiPG-2000S to a router due to wireless bandwidth concern. User should connect WiPG-2000S via company network or router 46 in order to secure the projection performance. The WebSlides user number should not exceed the recommended number on the web management page to prevent the connection failure or low projection performance. PS. Wireless Projection function and Conference Control function can support up to 64 users. 9.10.5 Remote Desktop 1) Click on Remote Desktop, you can allow or block the remote mouse/keyboard/touch control from WiPG-2000S receiver. 9.10.6 Select Projection Desktop 1) Click on Select Projection Desktop, you can select to project the main screen or the extended screen. Note: It can only support Mac 10.7 and 10.8. To use the extended screen, you have to install the SVS extended screen driver which can be found from the USB Token. 9.10.7 Advanced Settings 9.10.7.1 Projection Aspect Ratio 1) Click on Projection Aspect Ratio, choose Keep aspect ratio to keep the original aspect ratio if the desktop resolution is different from WiPG-2000S output resolution, or choose Fit full screen to project the screen to full screen. 47 9.10.7.2 Select Projection Mode 1) Click on Select Projection Mode, choose the Presentation mode for shortest latency or the Video mode for auto-latency control to have better video performance. 9.10.7.3 Resolution Settings 1) Click on Resolution Setting, choose Never Change to keep original desktop resolution, Always Change to change resolution automatically according to applications recommendation, or Always ask me to prompt a resolution change message to user. 9.10.7.4 Projection Quality 1) Click on Projection Quality, choose Normal for faster projection speed with lower screen image quality, and Best for clear screen image quality but slower projection speed. 48 9.10.7.5 Screen Encoding Format 1) Click on Screen Encoding Format, choose JPG for better image quality but bigger network bandwidth required, and H264 for smaller data size with reasonable image quality, and Auto that the application will select the encoding type automatically according to the receivers and senders setting and status. 9.10.8 Others 9.10.8.1 Make USB PnS Token 1) Click Make USB PnS Token to make a USB wePresent WiPG-2000S Token, you can insert a USB and follows the wizard to make the Token. After completion, you can plug the USB to any PC to do the projection without installing the wePresent WiPG software onto every PC. 49 9.10.8.2 Hot Key 1) Click on Hot Key to display the available Hot Key definition. 9.10.9 Disconnect 1) Click on Disconnect to disconnect from current connected receivers. 9.10.10 About 1) Click on About to show system information. It includes product model name, Application version. 9.10.11 Exit 1) Click on Exit to exit this application. It will stop current playing status and shut down the application immediately. 50 10 Web Management 10.1 Home Page 1) Make sure your PC connect to wePresent WiPG-2000S box successfully. 2) Enter the receiver IP address on your browser; you can find the IP address on the projector/display screen. (Default IP is 192.168.100.10). 3) Please select the Win 8 / 7 / Windows Vista / XP or Mac Utility and execute the installation program. Note:
Please disable the Smart Screen Filter on IE browser; otherwise you might not able to download the file. 10.2 Conference Control 1) Select Conference Control function, you can find the current connected user list 51 on this page. Please make sure the lock on the start page is disabled. 2) Enter password and then press [Login]. (default password: moderator) 3) After login, you can see a User List on the screen which indicates all of the users connected to wePresent WiPG-2000S box. 4) The default setting is allow control from this page only. When this function is checked, the moderator can control all the login users projection. 5) There are three columns, Computer Name, Play Control and IP Address. a. Play Control: There are six buttons, including Play(Full)
, Screen #1
, Screen#2
,Screen #3
, Screen#4 and Stop
. 52 b. Moderator can click on the play button to allow the projecting. c. Moderator can assign which user to project on which screen by clicking on the screen numbers. d. Moderator can stop the projecting anytime. 6) Uncheck the Allow Control from this page only, it will disable the centralized control and user can project the screen to WiPG-2000S freely. 7) Moderator can log out from the conference control mode by clicking on the log out on the upper right corner. 10.3 Admin 1) Click on Admin and then enter the password to login web admin page. (Default Password: admin) 10.4 System Status 1) Click on System Status option, it will show current system status. Model Name: Product model name Versions:
Firmware version no.: Product firmware version number. Device Information:
Resolution: Device output resolution. Host Name: Device network hostname. Network Status:
IP addressIP address of WiPG-2000S device. Subnet Masksubnet mask Default Gatewaydefault gateway 53 Wireless MAC addresswireless MAC address Wire MAC addresswire MAC address WiFi Information:
WiFi ModeAccess Point/WiFi Station/Concurrent AP-Station Mode SSIDCurrent SSID or the connected WiFi AP name. Connection Status:
Projecting status: Waiting for projecting or Projecting Total Users: It shows how many users login to wePresent WiPG-2000S. Code: It will show current Code Date and Time:
Date: Current date. Time: Current time. Time Zone: Current Time zone. 10.5 Device Setup 1) Click on Device Setup option, it will show the device setting items,
<Resolution>:
720p, 1080i, 1080p , UXGA(1600*1200), WXGA+(1440*900), WXGA(1360*768, 1280x768, 1280x800) ,XGA(1024*768) and HDMI Auto Detect.
<Code>: You can select Disable, Random, or Use the following code to 54 set a specified 4-characters Number. 2) Click on Date and Time Settings option, it will show the time setting items, Choose <SNTP/NTP Server Synchronization> or <Disable> to specify the time server or disable this feature.
<Time Zone>: Specify the time zone. 10.6 Network Setup 1) Click on Network Setup option, it will show the network setting items,
< Host Name and Domain Name>
Host Name: Enter the hostname of this device. Note: You can enable the use the same name as network name, it will use the same name as SSID for the device host name. Domain Name: You can also enter the domain name of this device if there is DNS server available.
< IP Setup>
You can select obtain IP address automatically or Use the following IP address to enter the IP address. The default setting is as following:
IP Address: 192.168.100.10. Subnet Mask: 255.255.255.0 Default Gateway: 192.168.100.10 DNS Server: 192.168.100.10
<DHCP Server Setup>
<Note: Auto-Configuration Network Setup on WiPG-2000S>
The default setting of the wePresent WiPG-2000S box as DHCP server. When the 55 wePresent WiPG-2000S box is connected to a LAN that already has a DHCP server, the wePresent WiPG-2000S box uses an IP address assigned by the server. When the wePresent WiPG-2000S box is connected to a LAN that does not have a DHCP server, the wePresent WiPG-2000S box becomes the DHCP server in the network. You can select auto option. WiPG-2000S will auto disable the DHCP server setup when the existing DHCP server is detected. Or you can simply select Disable option. When you choose Auto option, you can enter the below information or keep it as default setting. Start IP: 192.168.100.11 End IP: 192.168.100.254 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.100.10 DNS Server: 192.168.100.10
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within wePresent WiPG-2000S box All Block can block Guest Users(through wireless) to access all office network(LAN), All Pass can allow Guest Users(through wireless) to access all office network Internet Only can block Guest Users (through wireless) from office network
(LAN) but still reserve internet connection capability.
<Apply >: Press Apply button after configuration, and follow the reboot instruction when applicable.
<Cancel>: Press button to abort action. 56 10.7 WiFi Setup Wireless LAN: The default setting is Enable Mode: Specify the WiFi Access Point mode, WiFi Station mode and Concurrent AP and Station Mode.
< Access Point Mode>
SSID: You can change the default SSID and the maximum Length is 32 bytes. SSID Broadcast: The default value is Enable Band: 5G or 2.4G Channel: You can set a fixed channel or allow auto selection. The Auto selection means after power on wePresent WiPG-2000S, it will scan all of wireless channels and select one clear channel automatically. Encryption: you can select Disable or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/ WPA2 Enterprise. Key: If Encryption is enabled, you have to enter a key according to the encryption mode you selected. (If the length of the key entered is not sufficient or too long, a warning message will pop up.) Channel Bandwidth: select from 20M or Auto (20M/40M)
< Station Mode>
Connect to Existing AP: The default setting is Disable. If you choose Enbale 57 you need to enter the existing AP SSID that you want to connect. When you select Enable option, the following information needs to be entered accordingly to the existing AP setting:
Encryption: Select Disable or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/ WPA2 Enterprise. Key: If Encryption is enabled, you have to enter a key according to the encryption mode you selected. (If the length of the key entered is not sufficient or too long, a warning message will pop up.) Note: The Encryption and Key information must be consistent to the exiting AP configuration.
< Concurrent AP and Station Mode>
Access Point SSID: You can change the default SSID and the maximum Length is 32 bytes. SSID Broadcast: The default value is Enable Channel: You can set a fixed channel or allow auto selection. The Auto selection means after power on wePresent WiPG-2000S, it will scan all of wireless channels and select one clear channel automatically. Encryption: you can select Disable or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/ WPA2 Enterprise. Key: If Encryption is enabled, you have to enter a key according to the encryption mode you selected. (If the length of the key entered is not sufficient or too long, a warning message will pop up.) Channel Bandwidth: select from 20M or Auto (20M/40M) WiFi Station:
Connect to Existing AP: The default setting is Disable. If you choose Enbale you need to enter the existing AP SSID that you want to connect. When you 58 select Enable option, the following information needs to be entered accordingly to the existing AP setting:
Encryption: Select Disable or one of WEP/WPA PSK/WPA2 PSK/ WPA Enterprise/ WPA2 Enterprise. Key: If Encryption is enabled, you have to enter a key according to the encryption mode you selected. (If the length of the key entered is not sufficient or too long, a warning message will pop up.) Note: The Encryption and Key information must be consistent to the exiting AP configuration.
<Apply >: Press Apply button after configuration, and follow the reboot instruction when applicable.
<Cancel>: Press button to abort action. 10.8 SNMP Setup Enable or disable SNMP V3 service User Name: configure the user name to manage this device through SNMP Auth Password: configure the Auth password 59 Priv Password: configure the Priv password Trap IP: configure the trap receiver IP
<Apply >: Press Apply button after configuration, and follow the reboot instruction when applicable.
<Cancel>: Press button to abort action. Note:
For more information about SNMP V3, you can find it on USB token. \User Manual\WiPG-2000S_SNMP Instructions.pdf 10.9 OSD Setup 1) Click on OSD Setup option, you can:
Change Standby Image
<Reset to default>: Restore to default Logo image.
<Image File Upload>: Enter or browse the file name and upload the customized Image. Please refer to remark on screen when select the file. You can also adjust the following Display Option Device Information: Show or Hide the device Info. User List: Show or hide the User List. Connection Info: Show or hide the overlay connection info. Font Color: Adjust the font color of system information Screen Saver Settings: Enable or disable the screen saver and also configure the idle time(Minutes). (default is 5 mins) 60
<Apply >: Press Apply button after configuration, and follow the reboot instruction when applicable.
<Cancel>: Press button to abort action. 10.10 WebSlides Setup 1) Click on WebSlides Setup option, you can:
Adjust Auto Refresh Interval, or activate Access Password Control Please pay attention on the note for information.
<Apply >: Press Apply button after configuration, and follow the reboot instruction when applicable.
<Cancel>: Press button to abort action. 61 10.11 Change Passwords 1) Click on Change Password option, you can change the password setting for conference control and Admin.
(Length: up to 8 characters)
<Enter New Password>
<Confirm New Password>
<Apply>: Confirm and Save modifications. 62 10.12 Reset to Default 1) Click on Reset to Default option to restore factory default settings.
<Apply>: Confirm and take action.
*** You can also restore factory default setting from WiPG-2000S box reset button. You can find the reset button underneath the box. Please follow below procedures. 1. Press [Reset] button and Hold. 2. Turn on wePresent WiPG-2000S box. 3. Press more than 10 seconds and relief [Reset] button. 4. It will take effect to restore factory default settings. 10.13 Firmware Upgrade 1) Click on Firmware Upgrade option to import/export system configuration and upgrade firmware. 2) System Configuration Import and Export Export:
Export the system configuration to a configuration file Import: Import the system configuration file to WiPG-2000S 3) You can find the firmware version and release date here. 4) Firmware Upgrade 1) Firstly, you have to get latest firmware image file from your vendor. 2) Click <Browse> to specify file name you want to upgrade. 63 3) Click <Upgrade> to start. 4) A warning message shown and count down counter on the screen. 5) After a few minutes, a complete message shown on the screen. 6) Restart wePresent WiPG-2000S box to take effect. Warning: Dont power off wePresent WiPG-2000S while firmware upgrade in progress, otherwise you will damage your box and have to return device to your vendor for fixing. 10.14 Reboot System 1) Click on Reboot System option, you can restart the system Click on <Reboot >button: reboot system automatically. 64 10.15 Logout 1) Click on logout on the up right corner, you can logout the administration webpage and return back to the web management front page. 65 10.16 WebSlides 1) Press the WebSlides button to enter the WebSlides page. 2) Please refer to 8.10.5 Launch Webslides for more information. 66 11 USB Player The USB Player can playback the files stored in the attached USB drive, it can support photo/video/music/office files. Button Description Switch to Projection mode Enter photo viewer function Enter video player function Enter music player function Enter Office Viewer function Enter Setup Page 67 11.1 Photo Viewer Open the folder and find the photo file to play on the local display. Button Description Exit this file Go to previous file Start/Pause Slideshow Go to next file Rotate 11.2 Video Player Open the folder and find the video file to play on the local display. 68 Button Description Exit this file Fast-rewind. (2x/4x/8x) Play/Pause Fast-forward (2x/4x/8x) Volume level increase/decrease 11.3 Music Player Open the folder and find the music file to play on the local display. Button Description Exit this file Fast-rewind (2x/4x/8x) Go to previous file Play/Pause Go to next file Fast-forward (2x/4x/8x) Volume level increase/decrease Repeat All files/Repeat Single File 69 Shuffle 11.4 Office Viewer Open the folder and find the document file to play on the local display. Button Description Exit this file Go to previous page Go to next page 70 11.5 Setup Items Description Slide Show Duration 5/10/20/30 seconds Slide Show Repeat Repeat on/off Video Play mode Repeat on/off Music Play mode Repeat single file, Repeat all files Note:
Item:
Value Supported File Format MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4 /
MWV9 / MOV / Motion JPEG / MKV / ASF /
DVR-M5 Supported Video Codec MPEG-1 / MPEG-2 / MPEG-2 TS / MPEG-4* /
Supported Audio Codec Supported Office File WMV9** / QuickTime / Motion JPEG
* Microsoft MPEG-4 v1-3 is not supported.
** Only WMV3/WVC1 is supported. LPCM / AAC / MP3 / WMA Word, Excel, PowerPoint(up to Office 2010), Pdf. Details:
http://www.awindinc.com/WiFi-Doc/format.html
* All formats support up to 1920x1080, 30fps, and 20Mbps.
* These file formats might include video and audio codecs which are not supported. 71 12 Wall Mount 1) Please remove the rubber from the bottom side 2) Put the mounting screw on wePresent device 3) Put the mounting bracket on the wall with the screw 72 13 Safety FCC Federal Communications Commission (FCC) Statement 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 73 5150-5250MHz FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11an mode. For 802.11an devices operating in the frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11an mode (5 .15 - 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not violate federal regulations to protect Mobile Satellite Services. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. 74
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-04-24 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-04-24
|
||||
1 2 | Applicant's complete, legal business name |
BARCO LIMITED
|
||||
1 2 | FCC Registration Number (FRN) |
0012205373
|
||||
1 2 | Physical Address |
33F., No. 16, Xinzhan Rd., Banqiao Dist.
|
||||
1 2 |
New Taipei City, N/A 22041
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SQ3
|
||||
1 2 | Equipment Product Code |
WP2KS15
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C******** Y********
|
||||
1 2 | Telephone Number |
88627********
|
||||
1 2 | Fax Number |
88628********
|
||||
1 2 |
c******@barco.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 | Name |
W******** C******
|
||||
1 2 | Physical Address |
No. 134, Wu Kung Rd., New Taipei
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
88622******** Extension:
|
||||
1 2 | Fax Number |
88622********
|
||||
1 2 |
w******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 | Name |
W**** C******
|
||||
1 2 | Physical Address |
No. 134, Wu Kung Rd., New Taipei
|
||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
88622******** Extension:
|
||||
1 2 | Fax Number |
88622********
|
||||
1 2 |
w******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/30/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Interactive Presentation Gateway | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 | Name |
J****** L********
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886 2********
|
||||
1 2 |
j******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.2600000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5745 | 5825 | 0.05 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC | 5180 | 5240 | 0.06 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC