CE COMPLIANCE Type Designation: TECH200PRO Description/Intended Use: Hand Held Tread Depth and Pressure Reader used to read tire data and present the results. Hereby, Bartec declares that the product referenced above is in compliance with the essential requirements of Directive 1999/5/EC, on the approximation of the laws of the member states relating to Directive 1999/5/EC. This device complies with Part 15 of the FCC Rules and with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme aux CNR dIndustrie Canada a applicables aux appareils radio exempts de licence. Lexploitation est autorise condition que l'appareil ne produise pas de brouillage prjudiciable et qu'il accepte tout brouillage, mme celui susceptible d'en compromettre le fonctionnement. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Technical Specifications Dimensions of Tool: 9.0 h x 2.25 w x 4.0 l Dimensions of Case: 4.75 h x 14 w x 13.25 l Weight: 3.0 lbs Power Supply: Internal lithium polymer rechargeable battery (not user serviceable) Screen: High resolution, sunlight readable, 1.6 color graphics display, 240 x 240 pixels Tool: High impact ABS/Polycarbonate enclosure, resistant to automotive fluids, complete with protective rubber boot Ingress Protection (IP) rating: Rated IP54 for water and dust Maximum Tread Depth: 0/32 28/32 Tread Depth Accuracy: +/- .004 Pressure Range: 0 150 psi Pressure Accuracy: +/-1 psi Operating Environment: Temperature 32F - 104F, Humidity 20-55%
Bartec USA TECH200PRO User Guide Rev0