|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2024-03-08
|
|
1 2
|
Applicant's complete, legal business name |
Bartec USA LLC.
|
|
1 2
|
FCC Registration Number (FRN) |
0011559168
|
|
1 2
|
Physical Address |
6475 19 1/2 Mile Road
|
|
1 2
|
Sterling Heights, MI
|
|
1 2
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
P******@element.com
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
SX8
|
|
1 2
|
Equipment Product Code |
0965
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
S****** A****** H********
|
|
1 2
|
Title |
General Manager
|
|
1 2
|
Telephone Number |
586-6********
|
|
1 2
|
Fax Number |
586-3********
|
|
1 2
|
E-mail |
s******@bartecusa.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WLAN and Bluetooth Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Change in Identification |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Single Modular Approval.
Output Power listed is conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device with respect to Rule Part 2.1091. The antennas approved for use with this module are documented in the filing, and must be installed in the manner specified therein. This modular device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 1 2 | Single Modular Approval.
Output Power listed is peak conducted. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration only WLAN 2.4 GHz.This OEM module is approved for use in products operating as mobile or fixed transmitting device with respect to Rule Part 2.1091. The antennas approved for use with this module are documented in the filing, and must be installed in the manner specified therein. This modular device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
PHOENIX TESTLAB GmbH
|
|
1 2
|
Name |
H****** B******
|
|
1 2
|
Telephone Number |
49-52********
|
|
1 2
|
Fax Number |
49-52********
|
|
1 2
|
E-mail |
o******@phoenix-testlab.de
|
|