FCC ID: 2AXT4-11361 Char-Broil Color Change RF Programmable Meat Thermometer

Char-Broil Model # 11361 Color Change RF Programmable Meat Thermometer THANK YOU FOR YOU PURCHASE!

[2] Remote Unit User Manual:

Base Unit [1]:

[B] Indicator Light

[A] LCD Screen

[C] Cradle

[D] Battery Door

[E] Off/On Switch

[F] Probe Port Expert meat cooking requires correct measurement of internal temperatures. The thermometer should be inserted into the thickest part of the meat where the tip is past The center of the meat, but not in contact with bone, fat or gristle. When the desired temperature has been reached, remove from the grill or oven. Allow meat to stand 5 to 10 meetings before serving. Unit requires [4] AAA 1.5V batteries (not included) Caution:

Avoid contact with sharp points. Keep out of reach of small children. Heat Warning:

Thermometer probe may become hot during usage. Char-Broil Welders Quality Gloves or a heavy duty oven mitt recommended

[1] Base Unit Battery Disposal Warning:

Do not mix old and new3 batteries. Do not mis alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in a fire. Batteries may explode or leak. Please dispose of batteries properly.

[3] Temperature Probe Functions of your Color Change RF Programmable Meat Thermometer Remote timer for timed grilling Set you minutes, set your seconds, pause and restart. When your time has expired, the unit beeps and the LCD screen changes to GREEN and Remote Unit [2]:

Battery Installation Base Unit [1]:

Turn Base Unit [1] over & remove battery compartment door [D]. Insert [2] 1.5 V AAA batteries into the battery compartment following polarity. Replace battery compartment door [D]. Turning on the Base Unit [1]:

Insert the Temperature Probe [3] into the Probe Port [F]

Turn the Off/On Switch [E] to the On position If the Temperature Probe [3] is inserted correctly, youll see a readout displaying the current temperature

(Base Unit Ready) on the LCD Screen [A] as shown above and the Indicator Light [B] will blink once. If the Temperature Probe [3] has not been inserted or isnt making contact, you will see a readout displaying LLL (Base Unit Error) on the LCD Screen [A] as shown above and the Indicator Light [B] will blink once.

[B] Off/On Button

[A] LCD Screen

[H] Belt Clip flashes to alert you to attend to your meat.

[8] Meat Selections Fish Beef Lamb Veal Pork Turkey Burger Chicken Each Meat Selection has preset FDA doneness settings to track your selected doneness and that temperature is displayed on the LCD screen of the Remote Unit. The Temperature Probe continually tracks the internal temperature of your meat and you see the current internal temperature on the Remote Unit and the Base unit. When the internal temperature reaches you preset doneness, the unit beeps and the LCD screen changes color (based on the taste setting) and flashes to alert you to attend to your meat.

[C] Meat Selection Start/Stop

[F] Taste Selection Clear

[E] Mode

[D] Temperature Up Minutes Up

[G] Temperature Down

- Seconds Up

[I] Battery Door Remote Unit Ready Remote Unit Error

[3] Temperature Probe Battery Installation Remote Unit [2]:

Turn Remote Unit [2] over & slide the belt clip [H] off & remove the battery compart door [I]. Insert [2] 1.5 V AAA batteries into the battery compartment following polarity. Replace battery compartment door [I]

and slide the belt clip [H] back on. Turning on the Remote Unit [2]:

Depress the Off/On Button [B]. The LCD Screen [A] should turn Red, then Green, then Blue and go to the normal screen color (grey/green). If the Remote Unit [2] is successfully connected with the BASE Unit [1], youll see a readout displaying (Remote Unit Ready) on the LCD Screen [A]

as shown TO THE LEFT. If the Remote Unit [2] has not connected with the BASE Unit [1], you will see a readout displaying LLL

(Remote Unit Error)on the LCD Screen

[A] as shown TO THE LEFT. 2021 BASE4 Ventures, LLC Addison, Texas 75001 All Rights Reserved. All inquiries relative to this product Should be directed to:

BASE4 Ventures, LLC.

(888) 988-2427 Between 8:00 AM and 5:00PM Central Time Zone Designed in US Made in China Char-Broil is a registered trademark of W.C. Bradley Company This product is distributed under license from W.C. Bradley to BASE4 Ventures, LLC If you have successfully connected the Remote Unit [2] with the BASE Unit [1] and you see the

(Base Unit Ready) on the LCD Screen [A] as shown above, your Color Change RF Programmable Meat Thermometer is configured and ready for use. Setting the Remote Preset Meat Selections function:

Setting the Remote timer function:

If you have successfully connected the Remote Unit [2] with the BASE Unit [1], you will see satellite symbol beside the current temp read-out. Depress the Mode [E] button to display the down triangle next to the set temp read-out. Depress the Meat Selection [C] button until the desired meat is circled. Next, Depress the Taste Selection [F] button until the desired taste (doneness) is selected (see chart on first page). Each Meat Selection has different Taste Selections based on the FDA recommended internal temperatures. The Temperature Probe [3] will measure the internal temperature and display the current temperature on both the Remote Unit [2] and the BASE Unit [1]. You can choose top select your own custom set temperature if you want. Simply depress the Temperature Up [D] button or Temperature Down [G] button until your desired temperature is displayed in the Set Temperature read-out. The Meat Selection will disappear and the Taste Selection read-out. On either setting, when the internal temperature reaches you preset doneness, the Remote Unit

[2] beeps and the LCD screen changes color and flashes to alert you to attend to your meat. Depress the Mode [E] button to display the up triangle next the time read-outs (00:00). Depress the Minutes Up [D] button to display desired number of minutes. Depress the Seconds Up [G] button to display desired number of seconds. Depress the Start/Stop button once begin the count-down. If you need to stop the timer, Depress the Start/Stop button a second time to stop the count-down. To restart the timer, Depress the Start/Stop button again to restart the countdown. When your time has expired, the unit beeps and the LCD screen changes to GREEN and flashes to alert you to attend to your meat. To reset the timer, depress the Clear button [F]. When youve set the Color Change RF Programmable Meat Thermometer up and youre ready to grill your meat, insert the Temperature Probe [3] into the thickest part of the meat to a point where the tip is just past the center of the meat, but not in contact with bone, fat, or gristle. Youre now ready to grill your meat to perfection!

When youve set the Color Change RF Programmable Meat Thermometer up and youre ready to grill your meat, insert the Temperature Probe [3] into the thickest part of the meat to a point where the tip is just past the center of the meat, but not in contact with bone, fat, or gristle. Youre now ready to grill your meat to perfection!

FCCSTATEMENT 1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:

(1)Thisdevicemaynotcauseharmfulinterference,and

(2) This device must accept any interference received, including interference that may cause undesiredoperation. 2. Changes or modifications not expressly approved by the party responsible for compliance couldvoidtheusersauthoritytooperatetheequipment. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

BASE4Ventures,LLC Address:4393SunbeltDriveAddison,Texas,75001 Tel.:9723929090 Fax:9723929169 Email:ivy@ebase4cn.com Product Similarity Declaration 2020-10-22 To:

FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, BASE4 Ventures, LLC hereby declare that we have a Char-Broil Color Change RF Programmable Meat Thermometer as Product name (Model: 11361) was tested by Shenzhen Accurate Technology Co., Ltd., Meanwhile, for our marketing purpose, we would like to list series model 009-06-0243) on reports and certificate. They have the same circuit the only difference is model. FCCID:2AXT411361 We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature:

NameIvyChang TitleMerchandiser

BASE4 Ventures, LLC Address: 4393 Sunbelt Drive Addison, Texas, 75001 Tel.: 972-392-9090 Fax: 972-392-9169 E-mail: ivy@ebase4cn.com FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division Date: 2020-10-23 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, BASE4 Ventures, LLC hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, BASE4 Ventures, LLC the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature NameIvy Chang TitleMerchandiser QA-FR-170-B

BASE4 Ventures, LLC Address: 4393 Sunbelt Drive Addison, Texas, 75001 Tel.: 972-392-9090 Fax: 972-392-9169 E-mail: ivy@ebase4cn.com FCC Confidential Authorization Date: 2020-10-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXT4-11361 In accordance with Sections 0.457 and 0.459 of the Commissions BASE4 Ventures, LLC hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature NameIvy Chang TitleMerchandiser