ads L~ .O.@ >: htm Flyin anopen, Calibrate compass Flight within Control flight height unobstructed visual range below 120 meters or u A
% Bf ere Stay away from crowds, trees, wires, tall buildings, airports, signal towers, etc. during flight. Radio towers, high voltage lines, substations, and magnetic bulk metal may interfere with temote control signals and compasses, threatening flight safety.
10 meters per second Weather, thunder, fog, snow, strong wind
(wind speed 10 meters per second or more), weather, do not fly.
; oe Do not touch the propeller in the rotation of the work, or you may suffer serious damage to your body. Function introduction 1. Low voltage protection:
When the plane voltage is below 30%, the plane will automatically return. 2. Overcurrent protection:
The aircraft circuit is overcurrent protected when the fan blade is hit or stuck in a rotating state. Catalog security profile disclaimer and warning remote control compass dynamic system product maintenance flight condition requirement legal norms and flight restrictions know your X22 aircraft weeenaneean know your remote control charging and battery installation and remote control battery installation ready flight technical specifications aircraft component installation aa oN =
o aircraft operating instructions 2 B aircraft handling guidelines (us hand}
3D PTZ operating instructions
=o =
a mh function introduction check routine product components Sa ae
o product explanation Check routine Reason Resolvent 1cThe aircralt enters low voltage protection, _|1.Charge the aircraft. The aircraft did not respond 2.The remote control is short of power and the |2.Replace the remote control battery. power Indicator will blink. 1.Replace batteries. The flight ot | 4.The remote control is out of capacity. aircraft is insensitive | 2 The remote control with the same frequency }2.Change a place where there is no interle to flight is transmitting the jamming. rence from the same frequency. Hover to one side | 4 There is no level correction. 1.Horizontal correction, while hovering (correction function). Forward bias in| 4. utile colisions cause head bias. 4 Redefining the forward direction, headless condition (headless). Product components i=
d > BOSOC SES) 22-01 x22-02 X22-03 x22-04 Cover of main body Main bottom shell Tripod Electric palette LY x22-07 X22-08 X22-09 Card reader Motor A Motor B 18 Know your X22 aircraft X22 has stable and safe flight performance, smart return and precise positioning and flight. X22 aircraft can take high-definition video and photos. The following is the fuselage structure of the X22 aircraft:
L 3.aircraft status indicator >
2.tripod 4.electric machinery _ 5. propeller Know your remote control The X22 remote controls the flight of an aircraft at a maximum distance of 400-500 meters. Full @ teres eo we
, Aircraft voltage (7) Takeoff altitude
@ Remote voltage Flying speed Distance from takeoff point
@ Compass Expand the status of the mobile device General 2.4G status 1.Power switch 11. Side flight trim 2.Status indicator 3.Sling hook 413.Headless mode 4.ringt stick 5.left stick 15.One button return 6,Mobile device 16.Forward and support backward trim 7.Handle 8.High-low gear 9.Long press landing The remote control factory defaults to "American hands. The left joystick controls the flight height and direction, and the right joystick controls the forward, backward, and left flight directions of the aircraft. Camera / camera two buttons, according to the camera is different, part of the configuration will be invalid, it is recommended to shoot unified operation on the APP, left stick ringt stick
= RMS 8 hd (Ges Flight Distance limit:
Aircraft limit flight distance of 360 meters, more than 360 meters, the remote will prompt "drip" sound, remote control liquid crystal distance will flicker, the aircraft will automatically return to 360 meters within the range;After returning to the range of 280 meters, the remote control returned to normal. 10 3 16 Flight control, wireless communication requirements Manual take-off | Manual landing 1) Ensure the handling of aircraft at open spaces. Tall steel buildings may cause disturbances |
to the compass and GPS signals on the aircraft. | Push the throttle lever 2) To prevent interference between the remote control and other wireless devices, use the ell i )} x oy | monet gel aircraft remote control after shutting down other wireless devices. xy P - | mee 3) No flying near the electromagnetic interference source. Electromagnetic interference sources > | Aircraft to the ground, include, but are not limited to: high voltage wires, high voltage transmission stations, mobile Motor start / stop break lever | keep the throttle rod itt telephone base stations and television broadcast signal towers. If the flight site is not selected Boton/Stalt:matsr Slowly push up the | meen aes in accordance with the above provisions, the wireless transmission performance of the aircraft rote Pisa 3h eoogeds may be affected by interference, and a number of disturbance sources are too large, and the ENE aircraft will not be able to fly normally. Safe flight
[A\warning }
technical specifications In order to avoid possible injury and loss, be sure to observe the following:
1) Users are not allowed to control the product under the condition of poor health or poor mental health, such as drinking, drug use, drug anesthesia, dizziness, fatigue and nausea. + Aerocraft
, 3s) Body weight About 950g (plus camera /3D Cloud Terrace) 2) No action of arm breaking in the air. Maximum rise speed Bm/s:
i ir Maximum descent speed 4mvs 3) After landing, be sure to turn off the aircraft and then turn off the remote control. Maximum fight speed ws (High speed ed 4) The use of this product is prohibited from throwing or firing any dangerous objects to buildings, flight time itll be about 13 minutes. crowds, or animals. Working environment temperature 0 degrees C to 40 degrees C 8
(Beccrefal) 1) Users should ensure that they have sufficient knowledge of the aircraft and clear all emergency return measures. 2) Before each flight, the user should be ready for the flight plan. Don't handle this product recklessly. 3) Be sure to respect the privacy of other people before using the product's camera. Ensure that the local privacy laws and regulations have been cleared and understood before the use of the aircraft's camera. 4) Prohibit the use of this product for any offence and misconduct (including, but not lirnited to, espionage, military operations, and illegal investigations). 5) Prohibit the use of this product for any violation of other people's right to privacy. 6) The use of this product in violation of other's rights is prohibited. Smart return
(Be earful) 1) If the return route exists on the tall buildings will affect the aircraft retum installation, smart return function will be affected by the weather, environment and geomagnetic and other factors, so the use of smart return function before the need to preset reasonable return height or the use of a return in open areas. 2) Ensure that the device in communication within the control range of remote control aircraft. 3) Insmart return process, the aircraft cannot escape the obstacles autonomously. So make sure you have a reasonable return height before you use the one button return. Low battery Be careful 1) When the low power alarm is issued, be sure to return and land the aircraft to prevent the risk of losing power to the aircraft, humans and animals. Z Remote control working frequency 2.468-2.483GHz r Maximum effective distance of signal 360 meters / }
Working environment temperature O degrees C to 40 degrees C Ly Battery 6, 1.5 volt, 5 batteries /
+ Charger Voltage 45V Battery -
capacity 2200mAh Voltage T1AV Overall weight of battery 168g Working environment temperature O degrees C to 40 degrees C 12 3) do not carry ferromagnetic materials, such as keys, mobile phones, etc.. 4) if the compass is calibrated indoors, remember to recalibrate the compass when changing to outdoor flight to prevent flight data from abnormal magnetic fields due to the difference between the two regions. 5) please calibrate the compass when you encounter the following conditions:
a) Flying in a new flying place. b) Changes in the structure of the aircraft, such as the installation of the compass, have been changed. c) A severe drift of an aircraft during flight. Dynamic system Propeller 1) Check that the propellers are in good condition before each flight. Such as aging, breaking or deformation, please change after the flight. 2) Ensure that any operation of the propeller is performed until the aircraft power temains closed, 3) Because the blade is thin, please be careful when installing, in case of accidental scratches. 4) Use the aid tool to install and remove the propeller when necessary. 5) Check the propeller for proper installation and fastening before each flight. 6) Keep away from the rotating propeller and motor so as not to cut Electric machinery 1) Make sure the motor is firm and free to rotate. 2) Please do not modify the physical structure of the motor. 3) When the motor is stopped, do not touch the motor immediately by hand, or it may cause bums.
(Cookout) 1) Do not block the ventilation holes of the motor. 2) Do not block vent holes on the aircraft housing,
(Berea) Electric machinery 1) Make sure there is no foreign body in the motor, 2) If the motor is unable to rotate freely, perform the arm breaking action immediately to.stop the motor from turning. Electric modulation 1) To ensure that the power supply of the aircraft is switched on, the tone is prompted. Aircraft handling guidelines (us hand) Aircraft operating direction Rise and fall control Forward and backward control BY YANG TOYS NO:X22 Bluesea (HK) Industrial Co.,Ltd NO.7 Yongtai Road , Ximen street , chenghai Dustrict , Shantou City , Guangdon Province , Chuna Frequency bands : 2420-2440MHz Maximum output power:20dBm 14 Charging and battery installation and remote contro!
battery installation Battery installation OTS 2.Open the battery cover 3.Load battery 4.Connect battery power 1,Switch the switch to the OFF position Battery charge The battery is fully filed for about 200 minutes, and the flight time is about
=~ "| 43 minutes. When the charger plugged in the power, the balance "POWER"
lamp is green, usually bright, and the
"CHARGER" light is not bright. When the battery is inserted, the "CHARGER" light is red, and the power supply begins to charge. Ss eS 1.The battery charging 2.Plug in the power port is inserted into the charge balance charge Remote battery installation Battery cover i a When the remote control battery is out of power, h the remote control lamp FI ii ba Lol Lel flashes, and sounds "drops..."
Use 6 1.5V batteries:
prompt tone. AA Wien charging, the balance CHARGER ght s red, and when the battery is ful, CHARGER? lights out Ready flight Installation of propeller B fan installed after the left and right motor motor, A motor and tan mounted right front left motor, silver nut installed after left and right motor motor, black nut fitted right after the motor and the left motor, with an iron shaft equipped with a bullet hole through the nut, tighten the nut, the nut is guaranteed tight, keep the wind leat fly. Be sure to tighten the top of the propeller with the iron shaft to ensure that the propeller is properly installed and tightened. cn]
Legal norms and flight restrictions legal norm Axwarning To avoid violations, possible injuries and losses, be sure to observe the following:
1) Never fly near a manned plane. Drop off as soon as necessary. 2) The use of aircraft in densely populated areas is prohibited. Some areas include:
City, sports venues, exhibitions, concerts. 3) Ensure that the flight of aircraft does not affect the large manned aircraft on the toute. Always be alert and avoid other aircraft.
(lookout) To avoid violations, possible injuries and losses, be sure to observe the following:
1) No flying craft is allowed to enter the no fly zone of the law, No fly zones include airports, borders, and major cities. 2) Flight in airspace beyond the specified altitude is prohibited, 3) The aircraft is flying within your range of sight. If necessary, you can arrange observers to help you monitor the position of the aircraft. 4) Prohibit the use of aircraft carrying any illegal dangerous goods.
(Beara) 1) Make sure you have cleared categories of flight activities (for example, entertainment, business or business). Be sure to get a license issued by the relevant department before flight. If necessary, consult the local legal officer for detailed definition of the categories cof flight activities. Please note that in some areas and countries, the use of aircraft is prohibited from any form of commercial conduct. 2) It is forbidden to use aircraft in sensitive construction facilities, such as power stations, hydroelectric power stations, prisons, traffic arteries, government buildings and military facilities. 3) Be sure to respect the privacy of others when shooting with an aircraft. Unauthorized use of this product in any unauthorized surveillance activities, including, but limited to, surveillance of others, groups, activities, performances, exhibitions, or buildings, is prohibited, 4) Please note that in some regions and countries, although not for commercial purposes, but to use the camera to other people, organizations, activities, performances, exhibitions and other video or pictures will also violate the copyright dispute or the lawful rights and interests of others. In some regions and countries, small aerial models have been banned from participating in any commercial act. Therefore, please carefully understand and respect local laws and regulations before use. Flight limit area 1) Flight restrictions include, but are not limited to, international airports, the border lines of the two countries, and large cities and regions. 2) Consisting of a number of sub regions in certain flight restricted areas, Each sub region has its own area radius. The aircraft will not take off when it is closest to the no fly zone of the airport. When the aircraft flies in the restricted area outside the no fly zone, the flight height will be limited, and the flight limit will decrease linearly from 500 to 10 meters as the distance close to the no fly zone. Height limit 1) Keep flight height below 120 meters, and the aircraft should keep away from any tall buildings during flight,
(par pee f X22-11 22-12 X22-13 X22-14 Nut Receiving plate base _Batlery cover Receiving board 8000) |) |
X22-17 X22-18 X22-19 X22-20 Lampshade Switch board Light board Remote control Product explanation umber | Product name [Number] number] Product name | _Froductnarie [Number]
1 Nut 4 B Lampshade 2__[ Reversing blade | 2 9 Tripod 4 | 16 | Coverdecoration 1 3 Positive fan blade 2 10 | Receiving board| 1 | 7 Face cover lamp chimney 4 4 Upper body 1 M1 Battery 1 [18 [Upper cover of motor 4 5 | Reversingmotor | 2 12. [Receiving platobase] 1 [19 Switch board 1
|Postive rotating machine] 2 13 | Lower subject [1 | 20 Electric palette 4 7 Lower cover ot motor | 4 14 | Battery cover 1 [oa Light board 4 FECE@ RO N312 Ages: 14+
X22 Instruction manua Remote control and four axis alignment
{.Turn on the remote control 2. Switch the switch to the 3. Turn on the power switch of the ower switch. "NO" position after the aircraft, then the throttle rocker up oe aircraft is connected tothe __t the lowest point, then release the rocker to wait 3-4 seconds, the remote. power supply. control issued "drip" two, aircraft lights from flash to slow flash, this time the success of the frequency, Switch headless function and general function:
JET UY a When the aircraft on the aircraft after the frequency,
=) + the default is normal mode, the indicator lights on the aircraft for the long light, when holding the head func-
tion switching button of the remote control "14", the remote controller sends a drop drop..." sound into the head, then press 14 keys after hearing drop
"Jong "sound for the exit without a head of state.
(dual GPS without headless mode function) 2. in the headless slate, the controller does not need to recognize the head of the aircraft, only to control the vehicle according to the joystick direction of the remote control. 3. define positive direction function correction:
When the aircraft in the headless state collision, if found in the direction of the fixed head deviation, just the aircraft back to the right direction, the remote contra! throttle rocker pulled to the upper left comer, the direction of the rocker pulled to the lower right corner, while pulling the wait for 1 seconds, remote control issued a drop of the vehicle light from illuminated steady into a flash, about 3 seconds later, the remote control issued " Drop drops "5, the light is often bright, calibration success."
4.Press this button to make the aircraft automatically return, and then retum one by one, you can terminate the return. After landing, take otf immediately, press a return key again, cancel the retum function to unlock, the motor takes off. When the spacecraft return to the process, the remote control can not be controlled.The aircraft can be controlled to avoid obstructions when the aircraft returns to the takeoff point and begins to descend. 7 Disclaimer and guidelines for safe operation security profile 1. environment Flying in open spaces far from the crowd.
+ Flying at an altitude of less than 6000 meters. Flying at a temperature of 0-40 degrees centigrade.
+ For flight in the legal area, see section fifth. The use of X21 aircraft has certain safety risks and is unsuitable for use by people under the age of 18, Security profile contains only part of the flight safety knowledge, please read the disclaimer and safety guidelines made carefully. 2. check Make sure the equipment is fully charged.
+ Make sure the propeller is free of breakage and securely mounted.
+ Ensure that the aircraft motor is clean and nondestructive.
+ Make sure the camera lens is clean and well.
+ Carry out pre flight inspection and calibrate compass according to instruction. 3. operation Keep away from the propeller and motor in the rotation of the work.
+ Flying within sight range. In flight, the lever break will cause the aircraft to fall
+ Do not answer telephones during flight, Do not operate the aircraft under the influence of alcohol or drugs.
+ The aircraft relies on visual positioning to avoid the specular areas such as the water or snow (only aircraft with visual positioning).
+ Low battery warning please return as soon as possible, GPS will not automatically return function.
+ The aircraft does not automatically avoid obstacles when it is automatic return. If the remote control signal is normal, the flight direction can be controlled by the controller. No signal from the remote, automatic re-entry.
+ After landing, turn off the aircraft and then turn off the remote control. 4, maintenance Replace damaged and damaged propellers.
+ Aircraft and flight batteries are suitable for long-term storage in environments ranging from 22 degrees Celsius to 28 degrees celsius. 5. fly restrictions and local regulations
+ Flying in restricted flying zone is strictly forbidden.
+ Control the flight height below 120 meters. When flying, we need to change the space, comply with local laws and regulations, the machine is limited to 120 meters. When the left lever (throttle) pushes up or When the left lever (rudder) is pushed up down, the aircraft rises or falls accordingly. or down, the aircraft advances or retreats accordingly. Fly on the left, fly on the right Left tum and right turn control When the left joystick (throttle) is pushed left or right, the aircraft should turn left or right accordingly When the right lever (throttle) is pushed to the left or right, the aircraft will fly to the left or to the right accordingly Fine-tuning operations:
Forward and backward trim control Left and right fly trim control When the vehicle is hovering in the air, the vehicle can be corr ected by backward fine tuning when it appears automatic forw ard flight. When the vehicle app-
ears automatic backward flight, it can be corrected by pressing forward fine adjustment. When the vehicle is hovering in the sky, the aircraft is automatically left to the side of the fly, you can press the right fine-tuning to correct. When the aircraft appears on the fight side of the flight, it can be corr-
ected by pressing the left trimming. 45 Disclaimer and warning This product is not a toy and is not suitable for people under the age of 18. Do not expose children to X21. Be sure to take special care when children appear in the scene. Please read this document carefully before using this product. This statement has an important impact on the safe use of this product and your legitimate rights and interests. This product is a multi rotor aircraft, in the normal operation of the power supply and parts without damage, will provide an easy flight experience. Be sure to read this document carefully before using the product to understand your legal tights, responsibilities and safety instructions. Otherwise, you may cause property damage, safety accidents and personal safety hazards. Once you use this product, it is deemed that you have understood, acknowledged and accepted all the terms and contents of this anno uncement. The user is responsible for his actions and all the consequences resulting from them. The user promises to use the product only for legitimate purposes and agrees to this provision. Not liable for any direct or indirect personal injury or property damage caused by the failure to use the product in accordance with the safety instructions, The user shall understand and execute, including, but not limited to, this safety operation instruction. Remote control 1) Make sure that the remote control is fully charged before each flight. 2) When using the mobile device support on the remote contral, be sure to compress to prevent the device from slipping. 3) Make sute that the remote control device is securely supported. Compass Ciook out In order to avoid possible injury and loss, be sure to observe the following:
1) In case of severe drift during the flight (e.g., the aircraft cannot fly in a straight line), land immediately. Be careful 1) Compass calibration is very important, and the calibration results directly affect the safety of flight. Calibration may result in abnormal operation of the aircraft. The return function cannot be performed when the compass error occurs. 2) do not have regional calibration of the ferromagnetic materials, such as bulk metal, magnetic ore, parking lot, bridge, with underground reinforced building area. Aircraft component installation Installation steps of aircraft tripod Graph (1) Graph (2) 1. insert the tripod as shown in figure (1) 2, tum the screws clockwise according to at the interface of the lower body, the drawing (2). Aircraft operating instructions Aircraft alignment B ol) Tum on the aircraft power switch, and then turn on the remote control power switch, the remote control Issued a "drop", rocker pull down, wait 3-4 seconds, remote control issued "Didi" two, aircraft lights from flash to slow flash, this time successful frequency;
Compass calibration
[TO The throttle rod of the remote contro! moves to the lower left corner and the direction rod pulls to the upper right corner. After one second, the remote controller drops a sound, and the aircraft enters a flash state. The remote controller sends out 5 drops of "drop drops according to the shape of co, one arm, and two to three circles around the remote control. The lights of the aircraft flashed from a flash to a normal light. If the compass is not calibrated successfully, the aircraft |
ights will slow down once three times and the pointer will need to be recalibrated. Note: to put the aircraft to get the local open, easy to receive strong local GPS calibration, the new aircralt used for the first time must be calibrated once again after calibration, can not in the same place in flight. Gyro level calibration The remote control throttle oil rod is left in the upper left corner , the direction oil rod is pulled to the lower right corner , the remote controller " drops * , the aircraft flash for 1 second , the light turns to be normally bright , and after about 6 seconds , the remote controller issues a" drop of drop " 5 sound , and the calibration is successful . If the gyro calibration is not successful , the aircraft lights slowly flash 2, and the gyroscope needs to be recalibrated at this time . 13 Product maintenance Storage and transportation In order to avoid possible injury and loss, be sure to observe the following:
1) As wire and small parts may pose a danger to children, make sure the children are kept away from the parts of the aircraft. Be careful 1) Store flying batteries in a dry and ventilated place to reduce direct sunlight to prevent battery overheating. For more than three months, the recommended storage temperature range is 22 degrees Celsius to 28 degrees celsius. Do not store batteries in low and minus 20 degrees Celsius or above 45 degrees celsius. 2) Never let an aircraft touch a liquid or immerse it in water. If the camera enters the water, please wipe it with a soft dry cloth in time. Do not open the power immediately after the aircraft falls into water, otherwise it will cause permanent damage to t he aircraft. Maintain Failure prompt:
1) Check that the components of the aircraft have been strongly hit. 2) Check the battery power regularly. When the battery life drops to 0%, replace a new battery. 3) To open the power of the aircraft, the aircraft lights flashing two times after the blink of a 1-second tule flashing, prompting users need to correct the gyroscope;
4) To open the power of the aircraft, the aircraft lights flashing three times after the blink of a 1-second rule flashing, prompting users need to adjust the magnetometer;
5 Use the remote control to unlock, the motor can start normally.When the accelerator rocker is pushed, the motor ceases to rotate, at which point the magnetometer may be disturbed and the magnetometer needs to be calibrated;
Flight condition requirement Weather and environmental needs Please fly under weather conditions as well as environmental conditions. To avoid possible injury and loss, be sure to observe the following:
1) Do not fly under severe weather, such as gale (wind speed five and over), snow, rain, foggy weather, etc.. 2) When flying, stay in line of sight control to keep the vehicle at least 10 meters away from obstacles, crowds, water surfaces and so on. 3) Extra attention should be paid to the handling of aircraft indoors.
(Be careful) 1) When flying above 6000 meters above sea level, the flight performance will be affected because of the environmental factors which lead to the decrease of the performance of the flight battery and power system. Please fly cautiously. 2) Do not use in the vehicle collision, overturning, fire and explosion, lightning, storm, rainstorm, flood, tornado, earthquake, sandstorms and other disasters, BA YANG TOYS IMPORTER: Joellenbeck GmbH Address: Kreuzberg 2 27404 Weertzen Germany changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency eneray and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connectthe equipmentinto an outlet on a circuit differentfrom thatto which the receiver is connected. Consultthe dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.